The patchset supports RTC PCF2131 on board dts.
For the details, please check the patch commit log.
Joy Zou (1):
arm64: dts: imx93-11x11-evk: add rtc PCF2131 support
.../boot/dts/freescale/imx93-11x11-evk.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
--
2.37.1
Support rtc PCF2131 on imx93-11x11-evk.
Signed-off-by: Joy Zou <[email protected]>
---
.../boot/dts/freescale/imx93-11x11-evk.dts | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 07e85a30a25f..065fa3390791 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -281,6 +281,24 @@ ldo5: LDO5 {
};
};
+&lpi2c3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_lpi2c3>;
+ pinctrl-1 = <&pinctrl_lpi2c3>;
+ status = "okay";
+
+ pcf2131: rtc@53 {
+ compatible = "nxp,pcf2131";
+ reg = <0x53>;
+ interrupt-parent = <&pcal6524>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ status = "okay";
+ };
+};
+
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
@@ -343,6 +361,13 @@ MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
>;
};
+ pinctrl_lpi2c3: lpi2c3grp {
+ fsl,pins = <
+ MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
+ MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
+ >;
+ };
+
pinctrl_pcal6524: pcal6524grp {
fsl,pins = <
MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e
--
2.37.1
On 07/04/2024 07:19, Joy Zou wrote:
> Support rtc PCF2131 on imx93-11x11-evk.
>
> Signed-off-by: Joy Zou <[email protected]>
> ---
> .../boot/dts/freescale/imx93-11x11-evk.dts | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> index 07e85a30a25f..065fa3390791 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
> @@ -281,6 +281,24 @@ ldo5: LDO5 {
> };
> };
>
> +&lpi2c3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <400000>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&pinctrl_lpi2c3>;
> + pinctrl-1 = <&pinctrl_lpi2c3>;
> + status = "okay";
> +
> + pcf2131: rtc@53 {
> + compatible = "nxp,pcf2131";
> + reg = <0x53>;
> + interrupt-parent = <&pcal6524>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + status = "okay";
Really, just drop...
Best regards,
Krzysztof
> -----Original Message-----
> From: Krzysztof Kozlowski <[email protected]>
> Sent: 2024年4月7日 17:04
> To: Joy Zou <[email protected]>; Jacky Bai <[email protected]>;
> [email protected]; [email protected];
> [email protected]; [email protected]; [email protected]
> Cc: [email protected]; [email protected]; dl-linux-imx
> <[email protected]>; [email protected]; [email protected];
> [email protected]; [email protected]
> Subject: [EXT] Re: [PATCH v1 1/1] arm64: dts: imx93-11x11-evk: add rtc
> PCF2131 support
> > +&lpi2c3 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + clock-frequency = <400000>;
> > + pinctrl-names = "default", "sleep";
> > + pinctrl-0 = <&pinctrl_lpi2c3>;
> > + pinctrl-1 = <&pinctrl_lpi2c3>;
> > + status = "okay";
> > +
> > + pcf2131: rtc@53 {
> > + compatible = "nxp,pcf2131";
> > + reg = <0x53>;
> > + interrupt-parent = <&pcal6524>;
> > + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> > + status = "okay";
>
> Really, just drop...
Ok, will drop the status in next version.
Thanks for your comment!
BR
Joy Zou
>
>
> Best regards,
> Krzysztof
On 07/04/2024 11:09, Joy Zou wrote:
>
>> -----Original Message-----
>> From: Krzysztof Kozlowski <[email protected]>
>> Sent: 2024年4月7日 17:04
>> To: Joy Zou <[email protected]>; Jacky Bai <[email protected]>;
>> [email protected]; [email protected];
>> [email protected]; [email protected]; [email protected]
>> Cc: [email protected]; [email protected]; dl-linux-imx
>> <[email protected]>; [email protected]; [email protected];
>> [email protected]; [email protected]
>> Subject: [EXT] Re: [PATCH v1 1/1] arm64: dts: imx93-11x11-evk: add rtc
>> PCF2131 support
>>> +&lpi2c3 {
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + clock-frequency = <400000>;
>>> + pinctrl-names = "default", "sleep";
>>> + pinctrl-0 = <&pinctrl_lpi2c3>;
>>> + pinctrl-1 = <&pinctrl_lpi2c3>;
>>> + status = "okay";
>>> +
>>> + pcf2131: rtc@53 {
>>> + compatible = "nxp,pcf2131";
>>> + reg = <0x53>;
>>> + interrupt-parent = <&pcal6524>;
>>> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
>>> + status = "okay";
>>
>> Really, just drop...
> Ok, will drop the status in next version.
> Thanks for your comment!
Please read DTS coding style.
Best regards,
Krzysztof
BR
Joy Zou
> -----Original Message-----
> From: Krzysztof Kozlowski <[email protected]>
> Sent: 2024年4月7日 17:12
> To: Joy Zou <[email protected]>; Jacky Bai <[email protected]>;
> [email protected]; [email protected];
> [email protected]; [email protected]; [email protected]
> Cc: [email protected]; [email protected]; dl-linux-imx
> <[email protected]>; [email protected]; [email protected];
> [email protected]; [email protected]
> Subject: Re: [EXT] Re: [PATCH v1 1/1] arm64: dts: imx93-11x11-evk: add rtc
> PCF2131 support
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On 07/04/2024 11:09, Joy Zou wrote:
> >
> >> -----Original Message-----
> >> From: Krzysztof Kozlowski <[email protected]>
> >> Sent: 2024年4月7日 17:04
> >> To: Joy Zou <[email protected]>; Jacky Bai <[email protected]>;
> >> [email protected]; [email protected];
> >> [email protected]; [email protected]; [email protected]
> >> Cc: [email protected]; [email protected]; dl-linux-imx
> >> <[email protected]>; [email protected]; [email protected];
> >> [email protected]; [email protected]
> >> Subject: [EXT] Re: [PATCH v1 1/1] arm64: dts: imx93-11x11-evk: add
> >> rtc
> >> PCF2131 support
> >>> +&lpi2c3 {
> >>> + #address-cells = <1>;
> >>> + #size-cells = <0>;
> >>> + clock-frequency = <400000>;
> >>> + pinctrl-names = "default", "sleep";
> >>> + pinctrl-0 = <&pinctrl_lpi2c3>;
> >>> + pinctrl-1 = <&pinctrl_lpi2c3>;
> >>> + status = "okay";
> >>> +
> >>> + pcf2131: rtc@53 {
> >>> + compatible = "nxp,pcf2131";
> >>> + reg = <0x53>;
> >>> + interrupt-parent = <&pcal6524>;
> >>> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> >>> + status = "okay";
> >>
> >> Really, just drop...
> > Ok, will drop the status in next version.
> > Thanks for your comment!
>
> Please read DTS coding style.
Thanks you very much!
Yeah, I have read the DTS coding style. The “status” property is by default “okay”, thus it can be omitted.
BR
Joy Zou
>
> Best regards,
> Krzysztof