The bma023, bma150, and smb380 are in the same family as the bma180
and support is being added to the bma180 IIO driver for them.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Jonathan Bakker <[email protected]>
---
Changes from v1
- Added bma150 and smb380 compatibles
- Added R-b tag
---
Documentation/devicetree/bindings/iio/accel/bma180.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
index f53237270b32..cfbfc6276b3c 100644
--- a/Documentation/devicetree/bindings/iio/accel/bma180.txt
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -1,14 +1,18 @@
-* Bosch BMA180 / BMA25x triaxial acceleration sensor
+* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor
+https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
http://omapworld.com/BMA180_111_1002839.pdf
http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
Required properties:
- compatible : should be one of:
+ "bosch,bma023"
+ "bosch,bma150"
"bosch,bma180"
"bosch,bma250"
"bosch,bma254"
+ "bosch,smb380"
- reg : the I2C address of the sensor
Optional properties:
--
2.20.1