Hi Herbert,
When can we expect this patch-set to be merged.
Regards,
Kalyani
> -----Original Message-----
> From: Kalyani Akula <[email protected]>
> Sent: Tuesday, January 28, 2020 11:48 AM
> To: [email protected]; [email protected];
> [email protected]; [email protected]; linux-
> [email protected]
> Cc: Rob Herring <[email protected]>; [email protected]; git-dev
> <[email protected]>; Mohan Marutirao Dhanawade
> <[email protected]>; Sarat Chand Savitala <[email protected]>; Harsh
> Jain <[email protected]>; Michal Simek <[email protected]>; Kalyani Akula
> <[email protected]>; Kalyani Akula <[email protected]>
> Subject: [PATCH V6 0/4] Add Xilinx's ZynqMP AES-GCM driver support
>
> This patch set adds support for
> - dt-binding docs for Xilinx ZynqMP AES driver
> - Adds device tree node for ZynqMP AES driver
> - Adds communication layer support for aes in zynqmp.c
> - Adds Xilinx ZynqMP driver for AES Algorithm
>
> NOTE: This patchset is based on Michal's branch
> https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git/log/?h=arm/driv
> ers
> because of possible merge conflict for 1/4 patch with below commit commit
> 461011b1e1ab ("drivers: firmware: xilinx: Add support for feature check")
>
> V6 Changes:
> - Updated SPDX-License-Identifier in xlnx,zynqmp-aes.yaml.
>
> V5 Changes :
> - Moved arm64: zynqmp: Add Xilinx AES node from 2/4 to 4/4.
> - Moved crypto: Add Xilinx AES driver patch from 4/4 to 3/4.
> - Moved dt-bindings patch from 1/4 to 2/4
> - Moved firmware: xilinx: Add ZynqMP aes API for AES patch from 3/4 to 1/4
> - Converted dt-bindings from .txt to .yaml format.
> - Corrected typo in the subject.
> - Updated zynqmp-aes node to correct location.
> - Replaced ARCH_ZYNQMP with ZYNQMP_FIRMWARE in Kconfig
> - Removed extra new lines and added wherever necessary.
> - Updated Signed-off-by sequence.
> - Ran checkpatch for all patches in the series.
>
> V4 Changes :
> - Addressed review comments.
>
> V3 Changes :
> - Added software fallback in cases where Hardware doesn't have
> the capability to handle the request.
> - Removed use of global variable for storing the driver data.
> - Enabled CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and executed all
> the kernel selftests. Also covered tests with tcrypt module.
>
> V2 Changes :
> - Converted RFC PATCH to PATCH
> - Removed ALG_SET_KEY_TYPE that was added to support keytype
> attribute. Taken using setkey interface.
> - Removed deprecated BLKCIPHER in Kconfig
> - Erased Key/IV from the buffer.
> - Renamed zynqmp-aes driver to zynqmp-aes-gcm.
> - Addressed few other review comments
>
>
> Kalyani Akula (4):
> firmware: xilinx: Add ZynqMP aes API for AES functionality
> dt-bindings: crypto: Add bindings for ZynqMP AES-GCM driver
> crypto: Add Xilinx AES driver
> arm64: zynqmp: Add Xilinx AES node.
>
> .../bindings/crypto/xlnx,zynqmp-aes.yaml | 37 ++
> arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 +
> drivers/crypto/Kconfig | 12 +
> drivers/crypto/Makefile | 1 +
> drivers/crypto/xilinx/Makefile | 2 +
> drivers/crypto/xilinx/zynqmp-aes-gcm.c | 466
> +++++++++++++++++++++
> drivers/firmware/xilinx/zynqmp.c | 25 ++
> include/linux/firmware/xlnx-zynqmp.h | 2 +
> 8 files changed, 549 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/crypto/xlnx,zynqmp-aes.yaml
> create mode 100644 drivers/crypto/xilinx/Makefile create mode 100644
> drivers/crypto/xilinx/zynqmp-aes-gcm.c
>
> --
> 1.9.5