Add 1588 timer node in files:
arch/powerpc/boot/dts/bsc9131rdb.dtsi
arch/powerpc/boot/dts/bsc9132qds.dtsi
arch/powerpc/boot/dts/p1010rdb.dtsi
arch/powerpc/boot/dts/p1020rdb-pd.dts
arch/powerpc/boot/dts/p1021rdb-pc.dtsi
arch/powerpc/boot/dts/p1022ds.dtsi
arch/powerpc/boot/dts/p1025twr.dtsi
arch/powerpc/boot/dts/p2020rdb-pc.dtsi
Signed-off-by: Yangbo Lu <[email protected]>
---
arch/powerpc/boot/dts/bsc9131rdb.dtsi | 12 ++++++++++++
arch/powerpc/boot/dts/bsc9132qds.dtsi | 12 ++++++++++++
arch/powerpc/boot/dts/p1010rdb.dtsi | 12 ++++++++++++
arch/powerpc/boot/dts/p1020rdb-pd.dts | 12 ++++++++++++
arch/powerpc/boot/dts/p1021rdb-pc.dtsi | 12 ++++++++++++
arch/powerpc/boot/dts/p1022ds.dtsi | 12 ++++++++++++
arch/powerpc/boot/dts/p1025twr.dtsi | 12 ++++++++++++
arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 15 +++++++++------
8 files changed, 93 insertions(+), 6 deletions(-)
diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
index 45efcba..629cc03 100644
--- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
+++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
@@ -80,6 +80,18 @@
status = "disabled";
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xcccccccd>;
+ fsl,tmr-fiper1 = <0x3b9ac9fb>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <249999999>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi
index af8e888..9d8d466 100644
--- a/arch/powerpc/boot/dts/bsc9132qds.dtsi
+++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi
@@ -87,6 +87,18 @@
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xcccccccd>;
+ fsl,tmr-fiper1 = <0x3b9ac9fb>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <249999999>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
tbi-handle = <&tbi0>;
diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index ea534ef..a454cfe 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -186,6 +186,18 @@
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0x80000016>;
+ fsl,tmr-fiper1 = <0x3b9ac9f6>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <199999999>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1020rdb-pd.dts b/arch/powerpc/boot/dts/p1020rdb-pd.dts
index 987017e..2d45195 100644
--- a/arch/powerpc/boot/dts/p1020rdb-pd.dts
+++ b/arch/powerpc/boot/dts/p1020rdb-pd.dts
@@ -225,6 +225,18 @@
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0x80000016>;
+ fsl,tmr-fiper1 = <0x3b9ac9f6>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <199999999>;
+ };
+
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
index d6274c5..3a2c12c 100644
--- a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi
@@ -224,6 +224,18 @@
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0x80000016>;
+ fsl,tmr-fiper1 = <0x3b9ac9f6>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <199999999>;
+ };
+
enet0: ethernet@b0000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi
index 957e0dc..75cdac2 100644
--- a/arch/powerpc/boot/dts/p1022ds.dtsi
+++ b/arch/powerpc/boot/dts/p1022ds.dtsi
@@ -215,6 +215,18 @@
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xc01ebd3d>;
+ fsl,tmr-fiper1 = <0x3b9ac9fb>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <266499999>;
+ };
+
ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi
index 8453501..860b133 100644
--- a/arch/powerpc/boot/dts/p1025twr.dtsi
+++ b/arch/powerpc/boot/dts/p1025twr.dtsi
@@ -138,6 +138,18 @@
};
};
+ ptp_clock@b0e00 {
+ compatible = "fsl,etsec-ptp";
+ reg = <0xb0e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <10>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xc0000021>;
+ fsl,tmr-fiper1 = <0x3b9ac9f6>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <133333332>;
+ };
+
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
index c21d1c7..434e21b 100644
--- a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
+++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
@@ -215,12 +215,15 @@
};
ptp_clock@24e00 {
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xCCCCCCCD>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x0001869B>;
- fsl,max-adj = <249999999>;
+ compatible = "fsl,etsec-ptp";
+ reg = <0x24e00 0xb0>;
+ interrupts = <68 2 0 0 69 2 0 0>;
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <2>;
+ fsl,tmr-add = <0xaaaaaaab>;
+ fsl,tmr-fiper1 = <0x3b9ac9fb>;
+ fsl,tmr-fiper2 = <0x00018696>;
+ fsl,max-adj = <299999999>;
};
enet0: ethernet@24000 {
--
2.1.0.27.g96db324
On Wed, 2015-05-06 at 17:40 +0800, Yangbo Lu wrote:
> Add 1588 timer node in files:
> arch/powerpc/boot/dts/bsc9131rdb.dtsi
> arch/powerpc/boot/dts/bsc9132qds.dtsi
> arch/powerpc/boot/dts/p1010rdb.dtsi
> arch/powerpc/boot/dts/p1020rdb-pd.dts
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi
> arch/powerpc/boot/dts/p1022ds.dtsi
> arch/powerpc/boot/dts/p1025twr.dtsi
> arch/powerpc/boot/dts/p2020rdb-pc.dtsi
>
> Signed-off-by: Yangbo Lu <[email protected]>
> ---
> arch/powerpc/boot/dts/bsc9131rdb.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/bsc9132qds.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1010rdb.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1020rdb-pd.dts | 12 ++++++++++++
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1022ds.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1025twr.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 15 +++++++++------
> 8 files changed, 93 insertions(+), 6 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> index 45efcba..629cc03 100644
> --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> @@ -80,6 +80,18 @@
> status = "disabled";
> };
>
> + ptp_clock@b0e00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0xb0e00 0xb0>;
> + interrupts = <68 2 0 0 69 2 0 0>;
> + fsl,tclk-period = <5>;
> + fsl,tmr-prsc = <2>;
> + fsl,tmr-add = <0xcccccccd>;
> + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> + fsl,tmr-fiper2 = <0x00018696>;
> + fsl,max-adj = <249999999>;
Please don't use hex for numbers that make more sense as decimal.
> --- a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> +++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> @@ -215,12 +215,15 @@
> };
>
> ptp_clock@24e00 {
> - fsl,tclk-period = <5>;
> - fsl,tmr-prsc = <200>;
> - fsl,tmr-add = <0xCCCCCCCD>;
> - fsl,tmr-fiper1 = <0x3B9AC9FB>;
> - fsl,tmr-fiper2 = <0x0001869B>;
> - fsl,max-adj = <249999999>;
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24e00 0xb0>;
> + interrupts = <68 2 0 0 69 2 0 0>;
> + fsl,tclk-period = <5>;
> + fsl,tmr-prsc = <2>;
> + fsl,tmr-add = <0xaaaaaaab>;
> + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> + fsl,tmr-fiper2 = <0x00018696>;
> + fsl,max-adj = <299999999>;
> };
This isn't adding a node -- it's changing values. If the old ones were
wrong, explain that in the changelog.
Also, p2020si-post.dtsi already adds interrupts to this node (and it
contains one more interrupt than the above), and it includes
pq3-etsec1-timer-0.dtsi which contains the compatible and reg (and
interrupts with two specifiers). Probably all of these should be using
pq3-etsec1-timer-0.dtsi and only specifying the board-specific values.
-Scott
Thanks.
Pls see my comments below.
-----Original Message-----
From: Wood Scott-B07421
Sent: Thursday, May 07, 2015 4:44 AM
To: Lu Yangbo-B47093
Cc: [email protected]; [email protected]
Subject: Re: [PATCH] powerpc/dts: Add 1588 timer node for eTSEC
On Wed, 2015-05-06 at 17:40 +0800, Yangbo Lu wrote:
> Add 1588 timer node in files:
> arch/powerpc/boot/dts/bsc9131rdb.dtsi
> arch/powerpc/boot/dts/bsc9132qds.dtsi
> arch/powerpc/boot/dts/p1010rdb.dtsi
> arch/powerpc/boot/dts/p1020rdb-pd.dts
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi
> arch/powerpc/boot/dts/p1022ds.dtsi
> arch/powerpc/boot/dts/p1025twr.dtsi
> arch/powerpc/boot/dts/p2020rdb-pc.dtsi
>
> Signed-off-by: Yangbo Lu <[email protected]>
> ---
> arch/powerpc/boot/dts/bsc9131rdb.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/bsc9132qds.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1010rdb.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1020rdb-pd.dts | 12 ++++++++++++
> arch/powerpc/boot/dts/p1021rdb-pc.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1022ds.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p1025twr.dtsi | 12 ++++++++++++
> arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 15 +++++++++------
> 8 files changed, 93 insertions(+), 6 deletions(-)
>
> diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> index 45efcba..629cc03 100644
> --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> @@ -80,6 +80,18 @@
> status = "disabled";
> };
>
> + ptp_clock@b0e00 {
> + compatible = "fsl,etsec-ptp";
> + reg = <0xb0e00 0xb0>;
> + interrupts = <68 2 0 0 69 2 0 0>;
> + fsl,tclk-period = <5>;
> + fsl,tmr-prsc = <2>;
> + fsl,tmr-add = <0xcccccccd>;
> + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> + fsl,tmr-fiper2 = <0x00018696>;
> + fsl,max-adj = <249999999>;
Please don't use hex for numbers that make more sense as decimal.
[Lu Yangbo-B47093] The hex value is register value, I think it's better to use hex.
> --- a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> +++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> @@ -215,12 +215,15 @@
> };
>
> ptp_clock@24e00 {
> - fsl,tclk-period = <5>;
> - fsl,tmr-prsc = <200>;
> - fsl,tmr-add = <0xCCCCCCCD>;
> - fsl,tmr-fiper1 = <0x3B9AC9FB>;
> - fsl,tmr-fiper2 = <0x0001869B>;
> - fsl,max-adj = <249999999>;
> + compatible = "fsl,etsec-ptp";
> + reg = <0x24e00 0xb0>;
> + interrupts = <68 2 0 0 69 2 0 0>;
> + fsl,tclk-period = <5>;
> + fsl,tmr-prsc = <2>;
> + fsl,tmr-add = <0xaaaaaaab>;
> + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> + fsl,tmr-fiper2 = <0x00018696>;
> + fsl,max-adj = <299999999>;
> };
This isn't adding a node -- it's changing values. If the old ones were wrong, explain that in the changelog.
Also, p2020si-post.dtsi already adds interrupts to this node (and it contains one more interrupt than the above), and it includes pq3-etsec1-timer-0.dtsi which contains the compatible and reg (and interrupts with two specifiers). Probably all of these should be using pq3-etsec1-timer-0.dtsi and only specifying the board-specific values.
[Lu Yangbo-B47093] I will modify according your comments here.
-Scott
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?
On Wed, 2015-05-06 at 21:26 -0500, Lu Yangbo-B47093 wrote:
> Thanks.
> Pls see my comments below.
>
> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Thursday, May 07, 2015 4:44 AM
> To: Lu Yangbo-B47093
> Cc: [email protected]; [email protected]
> Subject: Re: [PATCH] powerpc/dts: Add 1588 timer node for eTSEC
>
> On Wed, 2015-05-06 at 17:40 +0800, Yangbo Lu wrote:
> > Add 1588 timer node in files:
> > arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > arch/powerpc/boot/dts/bsc9132qds.dtsi
> > arch/powerpc/boot/dts/p1010rdb.dtsi
> > arch/powerpc/boot/dts/p1020rdb-pd.dts
> > arch/powerpc/boot/dts/p1021rdb-pc.dtsi
> > arch/powerpc/boot/dts/p1022ds.dtsi
> > arch/powerpc/boot/dts/p1025twr.dtsi
> > arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> >
> > Signed-off-by: Yangbo Lu <[email protected]>
> > ---
> > arch/powerpc/boot/dts/bsc9131rdb.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/bsc9132qds.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1010rdb.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1020rdb-pd.dts | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1021rdb-pc.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1022ds.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1025twr.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 15 +++++++++------
> > 8 files changed, 93 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > index 45efcba..629cc03 100644
> > --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > @@ -80,6 +80,18 @@
> > status = "disabled";
> > };
> >
> > + ptp_clock@b0e00 {
> > + compatible = "fsl,etsec-ptp";
> > + reg = <0xb0e00 0xb0>;
> > + interrupts = <68 2 0 0 69 2 0 0>;
> > + fsl,tclk-period = <5>;
> > + fsl,tmr-prsc = <2>;
> > + fsl,tmr-add = <0xcccccccd>;
> > + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> > + fsl,tmr-fiper2 = <0x00018696>;
> > + fsl,max-adj = <249999999>;
>
> Please don't use hex for numbers that make more sense as decimal.
> [Lu Yangbo-B47093] The hex value is register value, I think it's better to use hex.
Whether it goes into a register doesn't matter. Hex values are useful
for values which are subdivided into various bitfields, or whose hex
representation is simpler than decimal. I'm not familiar with the
details of this hardware, but I doubt the former is the case for
0x3b9ac9fb == 9999999995 or 0x18696 == 99990.
-Scott
-----Original Message-----
From: Wood Scott-B07421
Sent: Thursday, May 07, 2015 10:35 AM
To: Lu Yangbo-B47093
Cc: [email protected]; [email protected]
Subject: Re: [PATCH] powerpc/dts: Add 1588 timer node for eTSEC
On Wed, 2015-05-06 at 21:26 -0500, Lu Yangbo-B47093 wrote:
> Thanks.
> Pls see my comments below.
>
> -----Original Message-----
> From: Wood Scott-B07421
> Sent: Thursday, May 07, 2015 4:44 AM
> To: Lu Yangbo-B47093
> Cc: [email protected]; [email protected]
> Subject: Re: [PATCH] powerpc/dts: Add 1588 timer node for eTSEC
>
> On Wed, 2015-05-06 at 17:40 +0800, Yangbo Lu wrote:
> > Add 1588 timer node in files:
> > arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > arch/powerpc/boot/dts/bsc9132qds.dtsi
> > arch/powerpc/boot/dts/p1010rdb.dtsi
> > arch/powerpc/boot/dts/p1020rdb-pd.dts
> > arch/powerpc/boot/dts/p1021rdb-pc.dtsi
> > arch/powerpc/boot/dts/p1022ds.dtsi
> > arch/powerpc/boot/dts/p1025twr.dtsi
> > arch/powerpc/boot/dts/p2020rdb-pc.dtsi
> >
> > Signed-off-by: Yangbo Lu <[email protected]>
> > ---
> > arch/powerpc/boot/dts/bsc9131rdb.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/bsc9132qds.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1010rdb.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1020rdb-pd.dts | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1021rdb-pc.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1022ds.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p1025twr.dtsi | 12 ++++++++++++
> > arch/powerpc/boot/dts/p2020rdb-pc.dtsi | 15 +++++++++------
> > 8 files changed, 93 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > index 45efcba..629cc03 100644
> > --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi
> > @@ -80,6 +80,18 @@
> > status = "disabled";
> > };
> >
> > + ptp_clock@b0e00 {
> > + compatible = "fsl,etsec-ptp";
> > + reg = <0xb0e00 0xb0>;
> > + interrupts = <68 2 0 0 69 2 0 0>;
> > + fsl,tclk-period = <5>;
> > + fsl,tmr-prsc = <2>;
> > + fsl,tmr-add = <0xcccccccd>;
> > + fsl,tmr-fiper1 = <0x3b9ac9fb>;
> > + fsl,tmr-fiper2 = <0x00018696>;
> > + fsl,max-adj = <249999999>;
>
> Please don't use hex for numbers that make more sense as decimal.
> [Lu Yangbo-B47093] The hex value is register value, I think it's better to use hex.
Whether it goes into a register doesn't matter. Hex values are useful for values which are subdivided into various bitfields, or whose hex representation is simpler than decimal. I'm not familiar with the details of this hardware, but I doubt the former is the case for 0x3b9ac9fb == 9999999995 or 0x18696 == 99990.
[Lu Yangbo-B47093] Thanks Scott. I got it. The hex value here is not for various bitfields but a value calculated manually. I will modify to decimalism.
-Scott
????{.n?+???????+%?????ݶ??w??{.n?+????{??G?????{ay? ʇڙ?,j??f???h?????????z_??(?階?ݢj"???m??????G????????????&???~???iO???z??v?^?m???? ????????I?