2020-07-09 15:26:09

by vamshi.krishna.gopal

[permalink] [raw]
Subject: [PATCH] ASoC: Intel: boards: eve: Fix DMIC records zero

From: Brent Lu <[email protected]>

Add a dapm route to provide ssp mclk/sclk early
for DMIC on SSP0(rt5514) and Headset on SSP1(rt5663)
since sclk for both codecs are different the
struct now defines SSP0 and SSP1 mclk , sclk separately
This change ensures the DMIC PCM port
will not return all-zero data

Signed-off-by: Brent Lu <[email protected]>
Signed-off-by: Vamshi Krishna Gopal <[email protected]>
---
.../intel/boards/kbl_rt5663_rt5514_max98927.c | 150 ++++++++++++------
1 file changed, 102 insertions(+), 48 deletions(-)

diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
index b34cf6cf1139..584e4f9cedc2 100644
--- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
+++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
@@ -53,8 +53,10 @@ struct kbl_codec_private {
struct snd_soc_jack kabylake_headset;
struct list_head hdmi_pcm_list;
struct snd_soc_jack kabylake_hdmi[2];
- struct clk *mclk;
- struct clk *sclk;
+ struct clk *ssp0_mclk;
+ struct clk *ssp0_sclk;
+ struct clk *ssp1_mclk;
+ struct clk *ssp1_sclk;
};

enum {
@@ -77,13 +79,31 @@ static const struct snd_kcontrol_new kabylake_controls[] = {
};

static int platform_clock_control(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *k, int event)
+ struct snd_kcontrol *k, int event, int ssp_num)
{
struct snd_soc_dapm_context *dapm = w->dapm;
struct snd_soc_card *card = dapm->card;
struct kbl_codec_private *priv = snd_soc_card_get_drvdata(card);
+ struct clk *mclk, *sclk;
+ unsigned long sclk_rate;
int ret = 0;

+ switch (ssp_num) {
+ case 0:
+ mclk = priv->ssp0_mclk;
+ sclk = priv->ssp0_sclk;
+ sclk_rate = 6144000;
+ break;
+ case 1:
+ mclk = priv->ssp1_mclk;
+ sclk = priv->ssp1_sclk;
+ sclk_rate = 3072000;
+ break;
+ default:
+ dev_err(card->dev, "Invalid ssp_num %d\n", ssp_num);
+ return -EINVAL;
+ }
+
/*
* MCLK/SCLK need to be ON early for a successful synchronization of
* codec internal clock. And the clocks are turned off during
@@ -91,38 +111,46 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
*/
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
+ if (__clk_is_enabled(mclk))
+ return 0;
+
/* Enable MCLK */
- ret = clk_set_rate(priv->mclk, 24000000);
+ ret = clk_set_rate(mclk, 24000000);
if (ret < 0) {
- dev_err(card->dev, "Can't set rate for mclk, err: %d\n",
- ret);
+ dev_err(card->dev, "Can't set rate for ssp%d_mclk, err: %d\n",
+ ssp_num, ret);
return ret;
}

- ret = clk_prepare_enable(priv->mclk);
+ ret = clk_prepare_enable(mclk);
if (ret < 0) {
- dev_err(card->dev, "Can't enable mclk, err: %d\n", ret);
+ dev_err(card->dev, "Can't enable ssp%d_mclk, err: %d\n",
+ ssp_num, ret);
return ret;
}

/* Enable SCLK */
- ret = clk_set_rate(priv->sclk, 3072000);
+ ret = clk_set_rate(sclk, sclk_rate);
if (ret < 0) {
- dev_err(card->dev, "Can't set rate for sclk, err: %d\n",
- ret);
- clk_disable_unprepare(priv->mclk);
+ dev_err(card->dev, "Can't set rate for ssp%d_sclk, err: %d\n",
+ ssp_num, ret);
+ clk_disable_unprepare(mclk);
return ret;
}

- ret = clk_prepare_enable(priv->sclk);
+ ret = clk_prepare_enable(sclk);
if (ret < 0) {
- dev_err(card->dev, "Can't enable sclk, err: %d\n", ret);
- clk_disable_unprepare(priv->mclk);
+ dev_err(card->dev, "Can't enable ssp%d_sclk, err: %d\n",
+ ssp_num, ret);
+ clk_disable_unprepare(mclk);
}
break;
case SND_SOC_DAPM_POST_PMD:
- clk_disable_unprepare(priv->mclk);
- clk_disable_unprepare(priv->sclk);
+ if (!__clk_is_enabled(mclk))
+ return 0;
+
+ clk_disable_unprepare(mclk);
+ clk_disable_unprepare(sclk);
break;
default:
return 0;
@@ -131,6 +159,18 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
return 0;
}

+static int platform_clock_control_ssp0(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ return platform_clock_control(w, k, event, 0);
+}
+
+static int platform_clock_control_ssp1(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k, int event)
+{
+ return platform_clock_control(w, k, event, 1);
+}
+
static const struct snd_soc_dapm_widget kabylake_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
@@ -139,15 +179,17 @@ static const struct snd_soc_dapm_widget kabylake_widgets[] = {
SND_SOC_DAPM_MIC("DMIC", NULL),
SND_SOC_DAPM_SPK("HDMI1", NULL),
SND_SOC_DAPM_SPK("HDMI2", NULL),
- SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
- platform_clock_control, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_SUPPLY("Platform Clock SSP0", SND_SOC_NOPM, 0, 0,
+ platform_clock_control_ssp0, SND_SOC_DAPM_PRE_PMU |
+ SND_SOC_DAPM_POST_PMD),
+ SND_SOC_DAPM_SUPPLY("Platform Clock SSP1", SND_SOC_NOPM, 0, 0,
+ platform_clock_control_ssp1, SND_SOC_DAPM_PRE_PMU |
SND_SOC_DAPM_POST_PMD),
-
};

static const struct snd_soc_dapm_route kabylake_map[] = {
/* Headphones */
- { "Headphone Jack", NULL, "Platform Clock" },
+ { "Headphone Jack", NULL, "Platform Clock SSP1" },
{ "Headphone Jack", NULL, "HPOL" },
{ "Headphone Jack", NULL, "HPOR" },

@@ -156,7 +198,7 @@ static const struct snd_soc_dapm_route kabylake_map[] = {
{ "Right Spk", NULL, "Right BE_OUT" },

/* other jacks */
- { "Headset Mic", NULL, "Platform Clock" },
+ { "Headset Mic", NULL, "Platform Clock SSP1" },
{ "IN1P", NULL, "Headset Mic" },
{ "IN1N", NULL, "Headset Mic" },

@@ -180,6 +222,7 @@ static const struct snd_soc_dapm_route kabylake_map[] = {
{ "ssp0 Rx", NULL, "Right HiFi Capture" },

/* DMIC */
+ { "DMIC", NULL, "Platform Clock SSP0" },
{ "DMIC1L", NULL, "DMIC" },
{ "DMIC1R", NULL, "DMIC" },
{ "DMIC2L", NULL, "DMIC" },
@@ -666,7 +709,7 @@ static int kabylake_set_bias_level(struct snd_soc_card *card,
if (!component || strcmp(component->name, RT5514_DEV_NAME))
return 0;

- if (IS_ERR(priv->mclk))
+ if (IS_ERR(priv->ssp0_mclk))
return 0;

/*
@@ -678,17 +721,17 @@ static int kabylake_set_bias_level(struct snd_soc_card *card,
case SND_SOC_BIAS_PREPARE:
if (dapm->bias_level == SND_SOC_BIAS_ON) {
dev_dbg(card->dev, "Disable mclk");
- clk_disable_unprepare(priv->mclk);
+ clk_disable_unprepare(priv->ssp0_mclk);
} else {
dev_dbg(card->dev, "Enable mclk");
- ret = clk_set_rate(priv->mclk, 24000000);
+ ret = clk_set_rate(priv->ssp0_mclk, 24000000);
if (ret) {
dev_err(card->dev, "Can't set rate for mclk, err: %d\n",
ret);
return ret;
}

- ret = clk_prepare_enable(priv->mclk);
+ ret = clk_prepare_enable(priv->ssp0_mclk);
if (ret) {
dev_err(card->dev, "Can't enable mclk, err: %d\n",
ret);
@@ -757,6 +800,29 @@ static struct snd_soc_card kabylake_audio_card = {
.late_probe = kabylake_card_late_probe,
};

+static int kabylake_audio_clk_get(struct device *dev, const char *id,
+ struct clk **clk)
+{
+ int ret = 0;
+
+ if (!clk)
+ return -EINVAL;
+
+ *clk = devm_clk_get(dev, id);
+ if (IS_ERR(*clk)) {
+ ret = PTR_ERR(*clk);
+ if (ret == -ENOENT) {
+ dev_info(dev, "Failed to get %s, defer probe\n", id);
+ return -EPROBE_DEFER;
+ }
+
+ dev_err(dev, "Failed to get %s with err:%d\n", id, ret);
+ return ret;
+ }
+
+ return ret;
+}
+
static int kabylake_audio_probe(struct platform_device *pdev)
{
struct kbl_codec_private *ctx;
@@ -777,33 +843,21 @@ static int kabylake_audio_probe(struct platform_device *pdev)
dmic_constraints = mach->mach_params.dmic_num == 2 ?
&constraints_dmic_2ch : &constraints_dmic_channels;

- ctx->mclk = devm_clk_get(&pdev->dev, "ssp1_mclk");
- if (IS_ERR(ctx->mclk)) {
- ret = PTR_ERR(ctx->mclk);
- if (ret == -ENOENT) {
- dev_info(&pdev->dev,
- "Failed to get ssp1_mclk, defer probe\n");
- return -EPROBE_DEFER;
- }
+ ret = kabylake_audio_clk_get(&pdev->dev, "ssp0_mclk", &ctx->ssp0_mclk);
+ if (ret != 0)
+ return ret;

- dev_err(&pdev->dev, "Failed to get ssp1_mclk with err:%d\n",
- ret);
+ ret = kabylake_audio_clk_get(&pdev->dev, "ssp0_sclk", &ctx->ssp0_sclk);
+ if (ret != 0)
return ret;
- }

- ctx->sclk = devm_clk_get(&pdev->dev, "ssp1_sclk");
- if (IS_ERR(ctx->sclk)) {
- ret = PTR_ERR(ctx->sclk);
- if (ret == -ENOENT) {
- dev_info(&pdev->dev,
- "Failed to get ssp1_sclk, defer probe\n");
- return -EPROBE_DEFER;
- }
+ ret = kabylake_audio_clk_get(&pdev->dev, "ssp1_mclk", &ctx->ssp1_mclk);
+ if (ret != 0)
+ return ret;

- dev_err(&pdev->dev, "Failed to get ssp1_sclk with err:%d\n",
- ret);
+ ret = kabylake_audio_clk_get(&pdev->dev, "ssp1_sclk", &ctx->ssp1_sclk);
+ if (ret != 0)
return ret;
- }

return devm_snd_soc_register_card(&pdev->dev, &kabylake_audio_card);
}
--
2.17.1


2020-07-09 16:56:12

by Pierre-Louis Bossart

[permalink] [raw]
Subject: Re: [PATCH] ASoC: Intel: boards: eve: Fix DMIC records zero



On 7/9/20 10:25 AM, [email protected] wrote:
> From: Brent Lu <[email protected]>
>
> Add a dapm route to provide ssp mclk/sclk early
> for DMIC on SSP0(rt5514) and Headset on SSP1(rt5663)
> since sclk for both codecs are different the
> struct now defines SSP0 and SSP1 mclk , sclk separately
> This change ensures the DMIC PCM port
> will not return all-zero data
>
> Signed-off-by: Brent Lu <[email protected]>
> Signed-off-by: Vamshi Krishna Gopal <[email protected]>
> ---
> .../intel/boards/kbl_rt5663_rt5514_max98927.c | 150 ++++++++++++------
> 1 file changed, 102 insertions(+), 48 deletions(-)
>
> diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> index b34cf6cf1139..584e4f9cedc2 100644
> --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> @@ -53,8 +53,10 @@ struct kbl_codec_private {
> struct snd_soc_jack kabylake_headset;
> struct list_head hdmi_pcm_list;
> struct snd_soc_jack kabylake_hdmi[2];
> - struct clk *mclk;
> - struct clk *sclk;
> + struct clk *ssp0_mclk;
> + struct clk *ssp0_sclk;
> + struct clk *ssp1_mclk;
> + struct clk *ssp1_sclk;

The definition of a per-SSP MCLK is just wrong. there are 2 MCLKs
regardless of the number of SSPs, this should be MCLK0 and MCLK1.

It probably works in your case since you have 2 SSPs, but the Skylake
driver exposes ssp2..5_mclk clocks that don't exist in hardware. Oh well.

If you don't mind I'd prefer it if you used mclk0 and mclk1 and drop the
ssp_ prefix. You can still use the "ssp0_mclk" and "ssp1_mclk" strings
when calling devm_clk_get(), but that way if the Skylake driver is fixed
at some point we will not have to change the code in this driver, only
the clock names.

[...]

> @@ -757,6 +800,29 @@ static struct snd_soc_card kabylake_audio_card = {
> .late_probe = kabylake_card_late_probe,
> };
>
> +static int kabylake_audio_clk_get(struct device *dev, const char *id,
> + struct clk **clk)
> +{
> + int ret = 0;
> +
> + if (!clk)
> + return -EINVAL;
> +
> + *clk = devm_clk_get(dev, id);
> + if (IS_ERR(*clk)) {
> + ret = PTR_ERR(*clk);
> + if (ret == -ENOENT) {
> + dev_info(dev, "Failed to get %s, defer probe\n", id);
> + return -EPROBE_DEFER;
> + }
> +
> + dev_err(dev, "Failed to get %s with err:%d\n", id, ret);
> + return ret;

nit-pick: you can remove this return since you already have one two
lines below.

> + }
> +
> + return ret;
> +}
> +

2020-07-23 23:39:45

by N, Harshapriya

[permalink] [raw]
Subject: RE: [PATCH] ASoC: Intel: boards: eve: Fix DMIC records zero

> > .../intel/boards/kbl_rt5663_rt5514_max98927.c | 150 ++++++++++++------
> > 1 file changed, 102 insertions(+), 48 deletions(-)
> >
> > diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > index b34cf6cf1139..584e4f9cedc2 100644
> > --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c
> > @@ -53,8 +53,10 @@ struct kbl_codec_private {
> > struct snd_soc_jack kabylake_headset;
> > struct list_head hdmi_pcm_list;
> > struct snd_soc_jack kabylake_hdmi[2];
> > - struct clk *mclk;
> > - struct clk *sclk;
> > + struct clk *ssp0_mclk;
> > + struct clk *ssp0_sclk;
> > + struct clk *ssp1_mclk;
> > + struct clk *ssp1_sclk;
>
> The definition of a per-SSP MCLK is just wrong. there are 2 MCLKs regardless of
> the number of SSPs, this should be MCLK0 and MCLK1.
>
> It probably works in your case since you have 2 SSPs, but the Skylake driver
> exposes ssp2..5_mclk clocks that don't exist in hardware. Oh well.
>
> If you don't mind I'd prefer it if you used mclk0 and mclk1 and drop the ssp_
> prefix. You can still use the "ssp0_mclk" and "ssp1_mclk" strings when calling
> devm_clk_get(), but that way if the Skylake driver is fixed at some point we will
> not have to change the code in this driver, only the clock names.
There is actually just one mclk in this platform. Only the sclk rate to be applied is different for different codecs.
The names are misleading. It looks like there are different clocks for different SSP.
we shall post a new patch fixing this.
>
> [...]
>
> > @@ -757,6 +800,29 @@ static struct snd_soc_card kabylake_audio_card = {
> > .late_probe = kabylake_card_late_probe,
> > };
> >
> > +static int kabylake_audio_clk_get(struct device *dev, const char *id,
> > + struct clk **clk)
> > +{
> > + int ret = 0;
> > +
> > + if (!clk)
> > + return -EINVAL;
> > +
> > + *clk = devm_clk_get(dev, id);
> > + if (IS_ERR(*clk)) {
> > + ret = PTR_ERR(*clk);
> > + if (ret == -ENOENT) {
> > + dev_info(dev, "Failed to get %s, defer probe\n", id);
> > + return -EPROBE_DEFER;
> > + }
> > +
> > + dev_err(dev, "Failed to get %s with err:%d\n", id, ret);
> > + return ret;
>
> nit-pick: you can remove this return since you already have one two lines
> below.
ack
>
> > + }
> > +
> > + return ret;
> > +}
> > +