This is the start of the stable review cycle for the 4.14.190 release.
There are 64 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 29 Jul 2020 13:48:51 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.190-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.190-rc1
Mark O'Donovan <[email protected]>
ath9k: Fix regression with Atheros 9271
Qiujun Huang <[email protected]>
ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
John David Anglin <[email protected]>
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
Michael J. Ruhl <[email protected]>
io-mapping: indicate mapping failure
Hugh Dickins <[email protected]>
mm/memcg: fix refcount error while moving and swapping
Fangrui Song <[email protected]>
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
Tetsuo Handa <[email protected]>
vt: Reject zero-sized screen buffer size.
Tetsuo Handa <[email protected]>
fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins.
Serge Semin <[email protected]>
serial: 8250_mtk: Fix high-speed baud rates clamping
Yang Yingliang <[email protected]>
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
Ian Abbott <[email protected]>
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
Ian Abbott <[email protected]>
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
Ian Abbott <[email protected]>
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
Ian Abbott <[email protected]>
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
Rustam Kovhaev <[email protected]>
staging: wlan-ng: properly check endpoint types
Steve French <[email protected]>
Revert "cifs: Fix the target file was deleted when rename failed."
Forest Crossman <[email protected]>
usb: xhci: Fix ASM2142/ASM3142 DMA addressing
Chunfeng Yun <[email protected]>
usb: xhci-mtk: fix the failure of bandwidth allocation
Tetsuo Handa <[email protected]>
binder: Don't use mmput() from shrinker function.
Arnd Bergmann <[email protected]>
x86: math-emu: Fix up 'cmp' insn for clang ias
Will Deacon <[email protected]>
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
Evgeny Novikov <[email protected]>
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
Ilya Katsnelson <[email protected]>
Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
Leonid Ravich <[email protected]>
dmaengine: ioat setting ioat timeout as module parameter
Evgeny Novikov <[email protected]>
hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
Marc Kleine-Budde <[email protected]>
regmap: dev_get_regmap_match(): fix string comparison
leilk.liu <[email protected]>
spi: mediatek: use correct SPI_CFG2_REG MACRO
Merlijn Wajer <[email protected]>
Input: add `SW_MACHINE_COVER`
Dinghao Liu <[email protected]>
dmaengine: tegra210-adma: Fix runtime PM imbalance on error
Hans de Goede <[email protected]>
HID: apple: Disable Fn-key key-re-mapping on clone keyboards
Federico Ricchiuto <[email protected]>
HID: i2c-hid: add Mediacom FlexBook edge13 to descriptor override
Pi-Hsun Shih <[email protected]>
scripts/decode_stacktrace: strip basepath from all paths
Matthew Howell <[email protected]>
serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X
Cong Wang <[email protected]>
bonding: check return value of register_netdevice() in bond_newlink()
Wolfram Sang <[email protected]>
i2c: rcar: always clear ICSAR to avoid side effects
guodeqing <[email protected]>
ipvs: fix the connection sync failed in some cases
Liu Jian <[email protected]>
mlxsw: destroy workqueue when trap_register in mlxsw_emad_init
Taehee Yoo <[email protected]>
bonding: check error value of register_netdevice() immediately
Wang Hai <[email protected]>
net: smc91x: Fix possible memory leak in smc_drv_probe()
Chen-Yu Tsai <[email protected]>
drm: sun4i: hdmi: Fix inverted HPD result
Sergey Organov <[email protected]>
net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration
George Kennedy <[email protected]>
ax88172a: fix ax88172a_unbind() failures
Christophe JAILLET <[email protected]>
hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path
Vasundhara Volam <[email protected]>
bnxt_en: Fix race when modifying pause settings.
Robbie Ko <[email protected]>
btrfs: fix page leaks after failure to lock page for delalloc
Boris Burkov <[email protected]>
btrfs: fix mount failure caused by race with umount
Filipe Manana <[email protected]>
btrfs: fix double free on ulist after backref resolution failure
Hans de Goede <[email protected]>
ASoC: rt5670: Correct RT5670_LDO_SEL_MASK
Takashi Iwai <[email protected]>
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
Oleg Nesterov <[email protected]>
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
Yang Yingliang <[email protected]>
IB/umem: fix reference count leak in ib_umem_odp_get()
Vladimir Oltean <[email protected]>
spi: spi-fsl-dspi: Exit the ISR with IRQ_NONE when it's not ours
Olga Kornievskaia <[email protected]>
SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
Thomas Gleixner <[email protected]>
irqdomain/treewide: Keep firmware node unconditionally allocated
Ben Skeggs <[email protected]>
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
Tom Rix <[email protected]>
net: sky2: initialize return of gm_phy_read
Xie He <[email protected]>
drivers/net/wan/lapbether: Fixed the value of hard_header_len
Max Filippov <[email protected]>
xtensa: update *pos in cpuinfo_op.next
Max Filippov <[email protected]>
xtensa: fix __sync_fetch_and_{and,or}_4 declarations
Tom Rix <[email protected]>
scsi: scsi_transport_spi: Fix function pointer check
Markus Theil <[email protected]>
mac80211: allow rx of mesh eapol frames with default rx key
Jacky Hu <[email protected]>
pinctrl: amd: fix npins for uart0 in kerncz_groups
Navid Emamdoost <[email protected]>
gpio: arizona: put pm_runtime in case of failure
Navid Emamdoost <[email protected]>
gpio: arizona: handle pm_runtime_get_sync failure case
-------------
Diffstat:
Makefile | 6 +--
arch/arm64/kernel/debug-monitors.c | 4 +-
arch/parisc/include/asm/atomic.h | 2 +
arch/x86/kernel/apic/io_apic.c | 10 ++---
arch/x86/kernel/apic/msi.c | 16 ++++---
arch/x86/kernel/apic/vector.c | 1 -
arch/x86/math-emu/wm_sqrt.S | 2 +-
arch/x86/platform/uv/uv_irq.c | 3 +-
arch/xtensa/kernel/setup.c | 3 +-
arch/xtensa/kernel/xtensa_ksyms.c | 4 +-
drivers/android/binder_alloc.c | 2 +-
drivers/base/regmap/regmap.c | 2 +-
drivers/dma/ioat/dma.c | 12 +++++
drivers/dma/ioat/dma.h | 2 -
drivers/dma/tegra210-adma.c | 5 ++-
drivers/gpio/gpio-arizona.c | 7 ++-
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c | 4 +-
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c | 4 +-
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 2 +-
drivers/hid/hid-apple.c | 18 ++++++++
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++
drivers/hwmon/aspeed-pwm-tacho.c | 2 +
drivers/i2c/busses/i2c-rcar.c | 3 ++
drivers/infiniband/core/umem_odp.c | 3 +-
drivers/input/mouse/synaptics.c | 1 +
drivers/iommu/amd_iommu.c | 5 ++-
drivers/iommu/intel_irq_remapping.c | 2 +-
drivers/net/bonding/bond_main.c | 10 +++--
drivers/net/bonding/bond_netlink.c | 3 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 5 ++-
drivers/net/ethernet/marvell/sky2.c | 2 +-
drivers/net/ethernet/mellanox/mlxsw/core.c | 3 +-
drivers/net/ethernet/smsc/smc91x.c | 4 +-
drivers/net/hippi/rrunner.c | 2 +-
drivers/net/phy/dp83640.c | 4 ++
drivers/net/usb/ax88172a.c | 1 +
drivers/net/wan/lapbether.c | 9 +++-
drivers/net/wireless/ath/ath9k/hif_usb.c | 52 +++++++++++++++++-----
drivers/net/wireless/ath/ath9k/hif_usb.h | 5 +++
drivers/pci/host/vmd.c | 5 ++-
drivers/pinctrl/pinctrl-amd.h | 2 +-
drivers/scsi/scsi_transport_spi.c | 2 +-
drivers/spi/spi-fsl-dspi.c | 4 +-
drivers/spi/spi-mt65xx.c | 15 ++++---
drivers/staging/comedi/drivers/addi_apci_1032.c | 20 ++++++---
drivers/staging/comedi/drivers/addi_apci_1500.c | 24 +++++++---
drivers/staging/comedi/drivers/addi_apci_1564.c | 20 ++++++---
drivers/staging/comedi/drivers/ni_6527.c | 2 +-
drivers/staging/wlan-ng/prism2usb.c | 16 ++++++-
drivers/tty/serial/8250/8250_core.c | 2 +-
drivers/tty/serial/8250/8250_exar.c | 12 ++++-
drivers/tty/serial/8250/8250_mtk.c | 18 ++++++++
drivers/tty/vt/vt.c | 29 +++++++-----
drivers/usb/gadget/udc/gr_udc.c | 7 ++-
drivers/usb/host/xhci-mtk-sch.c | 4 ++
drivers/usb/host/xhci-pci.c | 3 ++
drivers/video/fbdev/core/bitblit.c | 4 +-
drivers/video/fbdev/core/fbcon_ccw.c | 4 +-
drivers/video/fbdev/core/fbcon_cw.c | 4 +-
drivers/video/fbdev/core/fbcon_ud.c | 4 +-
fs/btrfs/backref.c | 1 +
fs/btrfs/extent_io.c | 3 +-
fs/btrfs/volumes.c | 8 ++++
fs/cifs/inode.c | 10 +----
fs/nfs/direct.c | 13 ++----
fs/nfs/file.c | 1 -
include/linux/io-mapping.h | 5 ++-
include/linux/mod_devicetable.h | 2 +-
include/uapi/linux/input-event-codes.h | 3 +-
kernel/events/uprobes.c | 2 +-
mm/memcontrol.c | 4 +-
net/mac80211/rx.c | 26 +++++++++++
net/netfilter/ipvs/ip_vs_sync.c | 12 +++--
scripts/decode_stacktrace.sh | 4 +-
sound/core/info.c | 4 +-
sound/soc/codecs/rt5670.h | 2 +-
76 files changed, 387 insertions(+), 147 deletions(-)
From: Hans de Goede <[email protected]>
[ Upstream commit a5d81646fa294eed57786a9310b06ca48902adf8 ]
The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.
But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.
The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.
This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.
This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.
Cc: Joao Moreno <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-apple.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 8ab8f2350bbcd..b58ab769aa7b3 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -57,6 +57,7 @@ MODULE_PARM_DESC(swap_opt_cmd, "Swap the Option (\"Alt\") and Command (\"Flag\")
struct apple_sc {
unsigned long quirks;
unsigned int fn_on;
+ unsigned int fn_found;
DECLARE_BITMAP(pressed_numlock, KEY_CNT);
};
@@ -342,12 +343,15 @@ static int apple_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
+ struct apple_sc *asc = hid_get_drvdata(hdev);
+
if (usage->hid == (HID_UP_CUSTOM | 0x0003) ||
usage->hid == (HID_UP_MSVENDOR | 0x0003) ||
usage->hid == (HID_UP_HPVENDOR2 | 0x0003)) {
/* The fn key on Apple USB keyboards */
set_bit(EV_REP, hi->input->evbit);
hid_map_usage_clear(hi, usage, bit, max, EV_KEY, KEY_FN);
+ asc->fn_found = true;
apple_setup_input(hi->input);
return 1;
}
@@ -374,6 +378,19 @@ static int apple_input_mapped(struct hid_device *hdev, struct hid_input *hi,
return 0;
}
+static int apple_input_configured(struct hid_device *hdev,
+ struct hid_input *hidinput)
+{
+ struct apple_sc *asc = hid_get_drvdata(hdev);
+
+ if ((asc->quirks & APPLE_HAS_FN) && !asc->fn_found) {
+ hid_info(hdev, "Fn key not found (Apple Wireless Keyboard clone?), disabling Fn key handling\n");
+ asc->quirks = 0;
+ }
+
+ return 0;
+}
+
static int apple_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
@@ -588,6 +605,7 @@ static struct hid_driver apple_driver = {
.event = apple_event,
.input_mapping = apple_input_mapping,
.input_mapped = apple_input_mapped,
+ .input_configured = apple_input_configured,
};
module_hid_driver(apple_driver);
--
2.25.1
From: Merlijn Wajer <[email protected]>
[ Upstream commit c463bb2a8f8d7d97aa414bf7714fc77e9d3b10df ]
This event code represents the state of a removable cover of a device.
Value 0 means that the cover is open or removed, value 1 means that the
cover is closed.
Reviewed-by: Sebastian Reichel <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Merlijn Wajer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/mod_devicetable.h | 2 +-
include/uapi/linux/input-event-codes.h | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index eba777807fc04..6f8eb1238235f 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -293,7 +293,7 @@ struct pcmcia_device_id {
#define INPUT_DEVICE_ID_LED_MAX 0x0f
#define INPUT_DEVICE_ID_SND_MAX 0x07
#define INPUT_DEVICE_ID_FF_MAX 0x7f
-#define INPUT_DEVICE_ID_SW_MAX 0x0f
+#define INPUT_DEVICE_ID_SW_MAX 0x10
#define INPUT_DEVICE_ID_PROP_MAX 0x1f
#define INPUT_DEVICE_ID_MATCH_BUS 1
diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
index 61769d4b7dbac..bce76e55a3c82 100644
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -793,7 +793,8 @@
#define SW_LINEIN_INSERT 0x0d /* set = inserted */
#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
#define SW_PEN_INSERTED 0x0f /* set = pen inserted */
-#define SW_MAX 0x0f
+#define SW_MACHINE_COVER 0x10 /* set = cover closed */
+#define SW_MAX 0x10
#define SW_CNT (SW_MAX+1)
/*
--
2.25.1
From: leilk.liu <[email protected]>
[ Upstream commit 44b37eb79e16a56cb30ba55b2da452396b941e7a ]
this patch use correct SPI_CFG2_REG offset.
Signed-off-by: leilk.liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/spi/spi-mt65xx.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 0c2867deb36fc..da28c52c9da19 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -41,7 +41,6 @@
#define SPI_CFG0_SCK_LOW_OFFSET 8
#define SPI_CFG0_CS_HOLD_OFFSET 16
#define SPI_CFG0_CS_SETUP_OFFSET 24
-#define SPI_ADJUST_CFG0_SCK_LOW_OFFSET 16
#define SPI_ADJUST_CFG0_CS_HOLD_OFFSET 0
#define SPI_ADJUST_CFG0_CS_SETUP_OFFSET 16
@@ -53,6 +52,8 @@
#define SPI_CFG1_CS_IDLE_MASK 0xff
#define SPI_CFG1_PACKET_LOOP_MASK 0xff00
#define SPI_CFG1_PACKET_LENGTH_MASK 0x3ff0000
+#define SPI_CFG2_SCK_HIGH_OFFSET 0
+#define SPI_CFG2_SCK_LOW_OFFSET 16
#define SPI_CMD_ACT BIT(0)
#define SPI_CMD_RESUME BIT(1)
@@ -259,7 +260,7 @@ static void mtk_spi_set_cs(struct spi_device *spi, bool enable)
static void mtk_spi_prepare_transfer(struct spi_master *master,
struct spi_transfer *xfer)
{
- u32 spi_clk_hz, div, sck_time, cs_time, reg_val = 0;
+ u32 spi_clk_hz, div, sck_time, cs_time, reg_val;
struct mtk_spi *mdata = spi_master_get_devdata(master);
spi_clk_hz = clk_get_rate(mdata->spi_clk);
@@ -272,18 +273,18 @@ static void mtk_spi_prepare_transfer(struct spi_master *master,
cs_time = sck_time * 2;
if (mdata->dev_comp->enhance_timing) {
+ reg_val = (((sck_time - 1) & 0xffff)
+ << SPI_CFG2_SCK_HIGH_OFFSET);
reg_val |= (((sck_time - 1) & 0xffff)
- << SPI_CFG0_SCK_HIGH_OFFSET);
- reg_val |= (((sck_time - 1) & 0xffff)
- << SPI_ADJUST_CFG0_SCK_LOW_OFFSET);
+ << SPI_CFG2_SCK_LOW_OFFSET);
writel(reg_val, mdata->base + SPI_CFG2_REG);
- reg_val |= (((cs_time - 1) & 0xffff)
+ reg_val = (((cs_time - 1) & 0xffff)
<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
reg_val |= (((cs_time - 1) & 0xffff)
<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
writel(reg_val, mdata->base + SPI_CFG0_REG);
} else {
- reg_val |= (((sck_time - 1) & 0xff)
+ reg_val = (((sck_time - 1) & 0xff)
<< SPI_CFG0_SCK_HIGH_OFFSET);
reg_val |= (((sck_time - 1) & 0xff) << SPI_CFG0_SCK_LOW_OFFSET);
reg_val |= (((cs_time - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
--
2.25.1
From: Marc Kleine-Budde <[email protected]>
[ Upstream commit e84861fec32dee8a2e62bbaa52cded6b05a2a456 ]
This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.
The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.
Fix this by using strcmp() instead.
Signed-off-by: Marc Kleine-Budde <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/regmap/regmap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/regmap/regmap.c b/drivers/base/regmap/regmap.c
index 013d0a2b3ba0a..4e0cc40ad9ceb 100644
--- a/drivers/base/regmap/regmap.c
+++ b/drivers/base/regmap/regmap.c
@@ -1242,7 +1242,7 @@ static int dev_get_regmap_match(struct device *dev, void *res, void *data)
/* If the user didn't specify a name match any */
if (data)
- return (*r)->name == data;
+ return !strcmp((*r)->name, data);
else
return 1;
}
--
2.25.1
From: Leonid Ravich <[email protected]>
[ Upstream commit 87730ccbddcb48478b1b88e88b14e73424130764 ]
DMA transaction time to completion is a function of PCI bandwidth,
transaction size and a queue depth. So hard coded value for timeouts
might be wrong for some scenarios.
Signed-off-by: Leonid Ravich <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/ioat/dma.c | 12 ++++++++++++
drivers/dma/ioat/dma.h | 2 --
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index e3899ae429e0f..4c2b41beaf638 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -38,6 +38,18 @@
#include "../dmaengine.h"
+int completion_timeout = 200;
+module_param(completion_timeout, int, 0644);
+MODULE_PARM_DESC(completion_timeout,
+ "set ioat completion timeout [msec] (default 200 [msec])");
+int idle_timeout = 2000;
+module_param(idle_timeout, int, 0644);
+MODULE_PARM_DESC(idle_timeout,
+ "set ioat idel timeout [msec] (default 2000 [msec])");
+
+#define IDLE_TIMEOUT msecs_to_jiffies(idle_timeout)
+#define COMPLETION_TIMEOUT msecs_to_jiffies(completion_timeout)
+
static char *chanerr_str[] = {
"DMA Transfer Source Address Error",
"DMA Transfer Destination Address Error",
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index 56200eefcf5ee..01f9299572303 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -111,8 +111,6 @@ struct ioatdma_chan {
#define IOAT_RUN 5
#define IOAT_CHAN_ACTIVE 6
struct timer_list timer;
- #define COMPLETION_TIMEOUT msecs_to_jiffies(100)
- #define IDLE_TIMEOUT msecs_to_jiffies(2000)
#define RESET_DELAY msecs_to_jiffies(100)
struct ioatdma_device *ioat_dma;
dma_addr_t completion_dma;
--
2.25.1
From: Ian Abbott <[email protected]>
commit 926234f1b8434c4409aa4c53637aa3362ca07cea upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <[email protected]> #3.17+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/addi_apci_1564.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/drivers/staging/comedi/drivers/addi_apci_1564.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1564.c
@@ -340,14 +340,22 @@ static int apci1564_cos_insn_config(stru
unsigned int *data)
{
struct apci1564_private *devpriv = dev->private;
- unsigned int shift, oldmask;
+ unsigned int shift, oldmask, himask, lomask;
switch (data[0]) {
case INSN_CONFIG_DIGITAL_TRIG:
if (data[1] != 0)
return -EINVAL;
shift = data[3];
- oldmask = (1U << shift) - 1;
+ if (shift < 32) {
+ oldmask = (1U << shift) - 1;
+ himask = data[4] << shift;
+ lomask = data[5] << shift;
+ } else {
+ oldmask = 0xffffffffu;
+ himask = 0;
+ lomask = 0;
+ }
switch (data[2]) {
case COMEDI_DIGITAL_TRIG_DISABLE:
devpriv->ctrl = 0;
@@ -371,8 +379,8 @@ static int apci1564_cos_insn_config(stru
devpriv->mode2 &= oldmask;
}
/* configure specified channels */
- devpriv->mode1 |= data[4] << shift;
- devpriv->mode2 |= data[5] << shift;
+ devpriv->mode1 |= himask;
+ devpriv->mode2 |= lomask;
break;
case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
if (devpriv->ctrl != (APCI1564_DI_IRQ_ENA |
@@ -389,8 +397,8 @@ static int apci1564_cos_insn_config(stru
devpriv->mode2 &= oldmask;
}
/* configure specified channels */
- devpriv->mode1 |= data[4] << shift;
- devpriv->mode2 |= data[5] << shift;
+ devpriv->mode1 |= himask;
+ devpriv->mode2 |= lomask;
break;
default:
return -EINVAL;
From: Cong Wang <[email protected]>
[ Upstream commit c75d1d5248c0c97996051809ad0e9f154ba5d76e ]
Very similar to commit 544f287b8495
("bonding: check error value of register_netdevice() immediately"),
we should immediately check the return value of register_netdevice()
before doing anything else.
Fixes: 005db31d5f5f ("bonding: set carrier off for devices created through netlink")
Reported-and-tested-by: [email protected]
Cc: Beniamino Galvani <[email protected]>
Cc: Taehee Yoo <[email protected]>
Cc: Jay Vosburgh <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_netlink.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index 77babf1417a7e..0e95eeb822ea5 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -451,11 +451,10 @@ static int bond_newlink(struct net *src_net, struct net_device *bond_dev,
return err;
err = register_netdevice(bond_dev);
-
- netif_carrier_off(bond_dev);
if (!err) {
struct bonding *bond = netdev_priv(bond_dev);
+ netif_carrier_off(bond_dev);
bond_work_init_all(bond);
}
--
2.25.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit 3195c4706b00106aa82c73acd28340fa8fc2bfc1 ]
The size used when calling 'pci_alloc_consistent()' and
'pci_free_consistent()' should match.
Fix it and have it consistent with the corresponding call in 'rr_close()'.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hippi/rrunner.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index d7ba2b813effc..40ef4aeb0ef04 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1250,7 +1250,7 @@ static int rr_open(struct net_device *dev)
rrpriv->info = NULL;
}
if (rrpriv->rx_ctrl) {
- pci_free_consistent(pdev, sizeof(struct ring_ctrl),
+ pci_free_consistent(pdev, 256 * sizeof(struct ring_ctrl),
rrpriv->rx_ctrl, rrpriv->rx_ctrl_dma);
rrpriv->rx_ctrl = NULL;
}
--
2.25.1
From: Michael J. Ruhl <[email protected]>
commit e0b3e0b1a04367fc15c07f44e78361545b55357c upstream.
The !ATOMIC_IOMAP version of io_maping_init_wc will always return
success, even when the ioremap fails.
Since the ATOMIC_IOMAP version returns NULL when the init fails, and
callers check for a NULL return on error this is unexpected.
During a device probe, where the ioremap failed, a crash can look like
this:
BUG: unable to handle page fault for address: 0000000000210000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 177 Comm:
RIP: 0010:fill_page_dma [i915]
gen8_ppgtt_create [i915]
i915_ppgtt_create [i915]
intel_gt_init [i915]
i915_gem_init [i915]
i915_driver_probe [i915]
pci_device_probe
really_probe
driver_probe_device
The remap failure occurred much earlier in the probe. If it had been
propagated, the driver would have exited with an error.
Return NULL on ioremap failure.
[[email protected]: detect ioremap_wc() errors earlier]
Fixes: cafaf14a5d8f ("io-mapping: Always create a struct to hold metadata about the io-mapping")
Signed-off-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/io-mapping.h | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/include/linux/io-mapping.h
+++ b/include/linux/io-mapping.h
@@ -120,9 +120,12 @@ io_mapping_init_wc(struct io_mapping *io
resource_size_t base,
unsigned long size)
{
+ iomap->iomem = ioremap_wc(base, size);
+ if (!iomap->iomem)
+ return NULL;
+
iomap->base = base;
iomap->size = size;
- iomap->iomem = ioremap_wc(base, size);
#if defined(pgprot_noncached_wc) /* archs can't agree on a name ... */
iomap->prot = pgprot_noncached_wc(PAGE_KERNEL);
#elif defined(pgprot_writecombine)
From: Markus Theil <[email protected]>
[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]
Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.
Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.
With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.
Signed-off-by: Markus Theil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[small code cleanups]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/rx.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 56d7a3dfa543b..04ae9de55d74b 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2120,6 +2120,7 @@ static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)
static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
{
+ struct ieee80211_hdr *hdr = (void *)rx->skb->data;
struct sk_buff *skb = rx->skb;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
@@ -2130,6 +2131,31 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc)
if (status->flag & RX_FLAG_DECRYPTED)
return 0;
+ /* check mesh EAPOL frames first */
+ if (unlikely(rx->sta && ieee80211_vif_is_mesh(&rx->sdata->vif) &&
+ ieee80211_is_data(fc))) {
+ struct ieee80211s_hdr *mesh_hdr;
+ u16 hdr_len = ieee80211_hdrlen(fc);
+ u16 ethertype_offset;
+ __be16 ethertype;
+
+ if (!ether_addr_equal(hdr->addr1, rx->sdata->vif.addr))
+ goto drop_check;
+
+ /* make sure fixed part of mesh header is there, also checks skb len */
+ if (!pskb_may_pull(rx->skb, hdr_len + 6))
+ goto drop_check;
+
+ mesh_hdr = (struct ieee80211s_hdr *)(skb->data + hdr_len);
+ ethertype_offset = hdr_len + ieee80211_get_mesh_hdrlen(mesh_hdr) +
+ sizeof(rfc1042_header);
+
+ if (skb_copy_bits(rx->skb, ethertype_offset, ðertype, 2) == 0 &&
+ ethertype == rx->sdata->control_port_protocol)
+ return 0;
+ }
+
+drop_check:
/* Drop unencrypted frames if key is set. */
if (unlikely(!ieee80211_has_protected(fc) &&
!ieee80211_is_any_nullfunc(fc) &&
--
2.25.1
From: Mark O'Donovan <[email protected]>
commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream.
This fix allows ath9k_htc modules to connect to WLAN once again.
Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251
Signed-off-by: Mark O'Donovan <[email protected]>
Reported-by: Roman Mamedov <[email protected]>
Tested-by: Viktor Jägersküpper <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -731,11 +731,13 @@ static void ath9k_hif_usb_reg_in_cb(stru
return;
}
+ rx_buf->skb = nskb;
+
usb_fill_int_urb(urb, hif_dev->udev,
usb_rcvintpipe(hif_dev->udev,
USB_REG_IN_PIPE),
nskb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, nskb, 1);
+ ath9k_hif_usb_reg_in_cb, rx_buf, 1);
}
resubmit:
From: Tetsuo Handa <[email protected]>
commit ce684552a266cb1c7cc2f7e623f38567adec6653 upstream.
syzbot is reporting general protection fault in do_con_write() [1] caused
by vc->vc_screenbuf == ZERO_SIZE_PTR caused by vc->vc_screenbuf_size == 0
caused by vc->vc_cols == vc->vc_rows == vc->vc_size_row == 0 caused by
fb_set_var() from ioctl(FBIOPUT_VSCREENINFO) on /dev/fb0 , for
gotoxy(vc, 0, 0) from reset_terminal() from vc_init() from vc_allocate()
from con_install() from tty_init_dev() from tty_open() on such console
causes vc->vc_pos == 0x10000000e due to
((unsigned long) ZERO_SIZE_PTR) + -1U * 0 + (-1U << 1).
I don't think that a console with 0 column or 0 row makes sense. And it
seems that vc_do_resize() does not intend to allow resizing a console to
0 column or 0 row due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception.
Theoretically, cols and rows can be any range as long as
0 < cols * rows * 2 <= KMALLOC_MAX_SIZE is satisfied (e.g.
cols == 1048576 && rows == 2 is possible) because of
vc->vc_size_row = vc->vc_cols << 1;
vc->vc_screenbuf_size = vc->vc_rows * vc->vc_size_row;
in visual_init() and kzalloc(vc->vc_screenbuf_size) in vc_allocate().
Since we can detect cols == 0 or rows == 0 via screenbuf_size = 0 in
visual_init(), we can reject kzalloc(0). Then, vc_allocate() will return
an error, and con_write() will not be called on a console with 0 column
or 0 row.
We need to make sure that integer overflow in visual_init() won't happen.
Since vc_do_resize() restricts cols <= 32767 and rows <= 32767, applying
1 <= cols <= 32767 and 1 <= rows <= 32767 restrictions to vc_allocate()
will be practically fine.
This patch does not touch con_init(), for returning -EINVAL there
does not help when we are not returning -ENOMEM.
[1] https://syzkaller.appspot.com/bug?extid=017265e8553724e514e8
Reported-and-tested-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/vt/vt.c | 29 ++++++++++++++++++-----------
1 file changed, 18 insertions(+), 11 deletions(-)
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -762,10 +762,19 @@ static const struct tty_port_operations
.destruct = vc_port_destruct,
};
+/*
+ * Change # of rows and columns (0 means unchanged/the size of fg_console)
+ * [this is to be used together with some user program
+ * like resize that changes the hardware videomode]
+ */
+#define VC_MAXCOL (32767)
+#define VC_MAXROW (32767)
+
int vc_allocate(unsigned int currcons) /* return 0 on success */
{
struct vt_notifier_param param;
struct vc_data *vc;
+ int err;
WARN_CONSOLE_UNLOCKED();
@@ -795,6 +804,11 @@ int vc_allocate(unsigned int currcons) /
if (!*vc->vc_uni_pagedir_loc)
con_set_default_unimap(vc);
+ err = -EINVAL;
+ if (vc->vc_cols > VC_MAXCOL || vc->vc_rows > VC_MAXROW ||
+ vc->vc_screenbuf_size > KMALLOC_MAX_SIZE || !vc->vc_screenbuf_size)
+ goto err_free;
+ err = -ENOMEM;
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf)
goto err_free;
@@ -812,7 +826,7 @@ int vc_allocate(unsigned int currcons) /
err_free:
kfree(vc);
vc_cons[currcons].d = NULL;
- return -ENOMEM;
+ return err;
}
static inline int resize_screen(struct vc_data *vc, int width, int height,
@@ -827,14 +841,6 @@ static inline int resize_screen(struct v
return err;
}
-/*
- * Change # of rows and columns (0 means unchanged/the size of fg_console)
- * [this is to be used together with some user program
- * like resize that changes the hardware videomode]
- */
-#define VC_RESIZE_MAXCOL (32767)
-#define VC_RESIZE_MAXROW (32767)
-
/**
* vc_do_resize - resizing method for the tty
* @tty: tty being resized
@@ -869,7 +875,7 @@ static int vc_do_resize(struct tty_struc
user = vc->vc_resize_user;
vc->vc_resize_user = 0;
- if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
+ if (cols > VC_MAXCOL || lines > VC_MAXROW)
return -EINVAL;
new_cols = (cols ? cols : vc->vc_cols);
@@ -880,7 +886,7 @@ static int vc_do_resize(struct tty_struc
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- if (new_screen_size > KMALLOC_MAX_SIZE)
+ if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size)
return -EINVAL;
newscreen = kzalloc(new_screen_size, GFP_USER);
if (!newscreen)
@@ -3031,6 +3037,7 @@ static int __init con_init(void)
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
tty_port_init(&vc->port);
visual_init(vc, currcons, 1);
+ /* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
vc_init(vc, vc->vc_rows, vc->vc_cols,
currcons || !vc->vc_sw->con_save_screen);
From: Steve French <[email protected]>
commit 0e6705182d4e1b77248a93470d6d7b3013d59b30 upstream.
This reverts commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2.
Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.
The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.
Signed-off-by: Steve French <[email protected]>
Reported-by: Patrick Fernie <[email protected]>
CC: Stable <[email protected]>
Acked-by: Ronnie Sahlberg <[email protected]>
Acked-by: Pavel Shilovsky <[email protected]>
Acked-by: Zhang Xiaoxu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/inode.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1778,7 +1778,6 @@ cifs_rename2(struct inode *source_dir, s
FILE_UNIX_BASIC_INFO *info_buf_target;
unsigned int xid;
int rc, tmprc;
- bool new_target = d_really_is_negative(target_dentry);
if (flags & ~RENAME_NOREPLACE)
return -EINVAL;
@@ -1855,13 +1854,8 @@ cifs_rename2(struct inode *source_dir, s
*/
unlink_target:
- /*
- * If the target dentry was created during the rename, try
- * unlinking it if it's not negative
- */
- if (new_target &&
- d_really_is_positive(target_dentry) &&
- (rc == -EACCES || rc == -EEXIST)) {
+ /* Try unlinking the target dentry if it's not negative */
+ if (d_really_is_positive(target_dentry) && (rc == -EACCES || rc == -EEXIST)) {
if (d_is_dir(target_dentry))
tmprc = cifs_rmdir(target_dir, target_dentry);
else
From: Forest Crossman <[email protected]>
commit dbb0897e805f2ab1b8bc358f6c3d878a376b8897 upstream.
The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA
addresses, which can cause silent memory corruption or IOMMU errors on
platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk
to fix this issue.
Signed-off-by: Forest Crossman <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-pci.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -235,6 +235,9 @@ static void xhci_pci_quirks(struct devic
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
pdev->device == 0x1142)
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+ pdev->device == 0x2142)
+ xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
From: Ian Abbott <[email protected]>
commit 0bd0db42a030b75c20028c7ba6e327b9cb554116 upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this.
Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <[email protected]> #3.8+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/addi_apci_1032.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
--- a/drivers/staging/comedi/drivers/addi_apci_1032.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1032.c
@@ -115,14 +115,22 @@ static int apci1032_cos_insn_config(stru
unsigned int *data)
{
struct apci1032_private *devpriv = dev->private;
- unsigned int shift, oldmask;
+ unsigned int shift, oldmask, himask, lomask;
switch (data[0]) {
case INSN_CONFIG_DIGITAL_TRIG:
if (data[1] != 0)
return -EINVAL;
shift = data[3];
- oldmask = (1U << shift) - 1;
+ if (shift < 32) {
+ oldmask = (1U << shift) - 1;
+ himask = data[4] << shift;
+ lomask = data[5] << shift;
+ } else {
+ oldmask = 0xffffffffu;
+ himask = 0;
+ lomask = 0;
+ }
switch (data[2]) {
case COMEDI_DIGITAL_TRIG_DISABLE:
devpriv->ctrl = 0;
@@ -145,8 +153,8 @@ static int apci1032_cos_insn_config(stru
devpriv->mode2 &= oldmask;
}
/* configure specified channels */
- devpriv->mode1 |= data[4] << shift;
- devpriv->mode2 |= data[5] << shift;
+ devpriv->mode1 |= himask;
+ devpriv->mode2 |= lomask;
break;
case COMEDI_DIGITAL_TRIG_ENABLE_LEVELS:
if (devpriv->ctrl != (APCI1032_CTRL_INT_ENA |
@@ -163,8 +171,8 @@ static int apci1032_cos_insn_config(stru
devpriv->mode2 &= oldmask;
}
/* configure specified channels */
- devpriv->mode1 |= data[4] << shift;
- devpriv->mode2 |= data[5] << shift;
+ devpriv->mode1 |= himask;
+ devpriv->mode2 |= lomask;
break;
default:
return -EINVAL;
From: Ian Abbott <[email protected]>
commit f07804ec77d77f8a9dcf570a24154e17747bc82f upstream.
`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice. When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.
If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers. Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.
Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG")
Cc: <[email protected]> # 3.17+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/ni_6527.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/staging/comedi/drivers/ni_6527.c
+++ b/drivers/staging/comedi/drivers/ni_6527.c
@@ -341,7 +341,7 @@ static int ni6527_intr_insn_config(struc
case COMEDI_DIGITAL_TRIG_ENABLE_EDGES:
/* check shift amount */
shift = data[3];
- if (shift >= s->n_chan) {
+ if (shift >= 32) {
mask = 0;
rising = 0;
falling = 0;
From: Yang Yingliang <[email protected]>
commit f4c23a140d80ef5e6d3d1f8f57007649014b60fa upstream.
I got null-ptr-deref in serial8250_start_tx():
[ 78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 78.123778] Mem abort info:
[ 78.126560] ESR = 0x86000007
[ 78.129603] EC = 0x21: IABT (current EL), IL = 32 bits
[ 78.134891] SET = 0, FnV = 0
[ 78.137933] EA = 0, S1PTW = 0
[ 78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600
[ 78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000
[ 78.160029] Internal error: Oops: 86000007 [#1] SMP
[ 78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd
[ 78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48
[ 78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020
[ 78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[ 78.228435] pc : 0x0
[ 78.230618] lr : serial8250_start_tx+0x160/0x260
[ 78.235215] sp : ffff800062eefb80
[ 78.238517] x29: ffff800062eefb80 x28: 0000000000000fff
[ 78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000
[ 78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000
[ 78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002
[ 78.259679] x21: 0000000000000001 x20: 0000000000000000
[ 78.264969] x19: ffffa688827eecc8 x18: 0000000000000000
[ 78.270259] x17: 0000000000000000 x16: 0000000000000000
[ 78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6
[ 78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539
[ 78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0
[ 78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88
[ 78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000
[ 78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8
[ 78.307292] x3 : 0000000000000000 x2 : 0000000000000002
[ 78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8
[ 78.317873] Call trace:
[ 78.320312] 0x0
[ 78.322147] __uart_start.isra.9+0x64/0x78
[ 78.326229] uart_start+0xb8/0x1c8
[ 78.329620] uart_flush_chars+0x24/0x30
[ 78.333442] n_tty_receive_buf_common+0x7b0/0xc30
[ 78.338128] n_tty_receive_buf+0x44/0x2c8
[ 78.342122] tty_ioctl+0x348/0x11f8
[ 78.345599] ksys_ioctl+0xd8/0xf8
[ 78.348903] __arm64_sys_ioctl+0x2c/0xc8
[ 78.352812] el0_svc_common.constprop.2+0x88/0x1b0
[ 78.357583] do_el0_svc+0x44/0xd0
[ 78.360887] el0_sync_handler+0x14c/0x1d0
[ 78.364880] el0_sync+0x140/0x180
[ 78.368185] Code: bad PC value
SERIAL_PORT_DFNS is not defined on each arch, if it's not defined,
serial8250_set_defaults() won't be called in serial8250_isa_init_ports(),
so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref.
Fix this problem by calling serial8250_set_defaults() after init uart port.
Signed-off-by: Yang Yingliang <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -534,6 +534,7 @@ static void __init serial8250_isa_init_p
*/
up->mcr_mask = ~ALPHA_KLUDGE_MCR;
up->mcr_force = ALPHA_KLUDGE_MCR;
+ serial8250_set_defaults(up);
}
/* chain base port ops to support Remote Supervisor Adapter */
@@ -557,7 +558,6 @@ static void __init serial8250_isa_init_p
port->membase = old_serial_port[i].iomem_base;
port->iotype = old_serial_port[i].io_type;
port->regshift = old_serial_port[i].iomem_reg_shift;
- serial8250_set_defaults(up);
port->irqflags |= irqflag;
if (serial8250_isa_config != NULL)
From: Wolfram Sang <[email protected]>
[ Upstream commit eb01597158ffb1853a7a7fc2c57d4c844640f75e ]
On R-Car Gen2, we get a timeout when reading from the address set in
ICSAR, even though the slave interface is disabled. Clearing it fixes
this situation. Note that Gen3 is not affected.
To reproduce: bind and undbind an I2C slave on some bus, run
'i2cdetect' on that bus.
Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-rcar.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 132c4a405bf83..db9ca8e926ca7 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -817,6 +817,7 @@ static int rcar_unreg_slave(struct i2c_client *slave)
/* disable irqs and ensure none is running before clearing ptr */
rcar_i2c_write(priv, ICSIER, 0);
rcar_i2c_write(priv, ICSCR, 0);
+ rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
synchronize_irq(priv->irq);
priv->slave = NULL;
@@ -914,6 +915,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
if (ret < 0)
goto out_pm_put;
+ rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
+
if (priv->devtype == I2C_RCAR_GEN3) {
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (!IS_ERR(priv->rstc)) {
--
2.25.1
From: guodeqing <[email protected]>
[ Upstream commit 8210e344ccb798c672ab237b1a4f241bda08909b ]
The sync_thread_backup only checks sk_receive_queue is empty or not,
there is a situation which cannot sync the connection entries when
sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf,
the sync packets are dropped in __udp_enqueue_schedule_skb, this is
because the packets in reader_queue is not read, so the rmem is
not reclaimed.
Here I add the check of whether the reader_queue of the udp sock is
empty or not to solve this problem.
Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Reported-by: zhouxudong <[email protected]>
Signed-off-by: guodeqing <[email protected]>
Acked-by: Julian Anastasov <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/ip_vs_sync.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index b373e053ff9a3..90261055062ed 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -1726,6 +1726,8 @@ static int sync_thread_backup(void *data)
{
struct ip_vs_sync_thread_data *tinfo = data;
struct netns_ipvs *ipvs = tinfo->ipvs;
+ struct sock *sk = tinfo->sock->sk;
+ struct udp_sock *up = udp_sk(sk);
int len;
pr_info("sync thread started: state = BACKUP, mcast_ifn = %s, "
@@ -1733,12 +1735,14 @@ static int sync_thread_backup(void *data)
ipvs->bcfg.mcast_ifn, ipvs->bcfg.syncid, tinfo->id);
while (!kthread_should_stop()) {
- wait_event_interruptible(*sk_sleep(tinfo->sock->sk),
- !skb_queue_empty(&tinfo->sock->sk->sk_receive_queue)
- || kthread_should_stop());
+ wait_event_interruptible(*sk_sleep(sk),
+ !skb_queue_empty_lockless(&sk->sk_receive_queue) ||
+ !skb_queue_empty_lockless(&up->reader_queue) ||
+ kthread_should_stop());
/* do we have data now? */
- while (!skb_queue_empty(&(tinfo->sock->sk->sk_receive_queue))) {
+ while (!skb_queue_empty_lockless(&sk->sk_receive_queue) ||
+ !skb_queue_empty_lockless(&up->reader_queue)) {
len = ip_vs_receive(tinfo->sock, tinfo->buf,
ipvs->bcfg.sync_maxlen);
if (len <= 0) {
--
2.25.1
From: Matthew Howell <[email protected]>
[ Upstream commit 5fdbe136ae19ab751daaa4d08d9a42f3e30d17f9 ]
Sealevel XR17V35X based devices are inoperable on kernel versions
4.11 and above due to a change in the GPIO preconfiguration introduced in
commit
7dea8165f1d. This patch fixes this by preconfiguring the GPIO on Sealevel
cards to the value (0x00) used prior to commit 7dea8165f1d
With GPIOs preconfigured as per commit 7dea8165f1d all ports on
Sealevel XR17V35X based devices become stuck in high impedance
mode, regardless of dip-switch or software configuration. This
causes the device to become effectively unusable. This patch (in
various forms) has been distributed to our customers and no issues
related to it have been reported.
Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Matthew Howell <[email protected]>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2007221605270.13247@tstest-VirtualBox
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/8250/8250_exar.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 899f36b59af79..ed81128bb42e0 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -229,7 +229,17 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
* devices will export them as GPIOs, so we pre-configure them safely
* as inputs.
*/
- u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
+ u8 dir = 0x00;
+
+ if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) &&
+ (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) {
+ // Configure GPIO as inputs for Commtech adapters
+ dir = 0xff;
+ } else {
+ // Configure GPIO as outputs for SeaLevel adapters
+ dir = 0x00;
+ }
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
--
2.25.1
From: Pi-Hsun Shih <[email protected]>
[ Upstream commit d178770d8d21489abf5bafefcbb6d5243b482e9a ]
Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.
Change to remove the basepath prefix from all lines.
Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <[email protected]>
Signed-off-by: Pi-Hsun Shih <[email protected]>
Signed-off-by: Shik Chen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Nicolas Boichat <[email protected]>
Cc: Jiri Slaby <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
scripts/decode_stacktrace.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/scripts/decode_stacktrace.sh b/scripts/decode_stacktrace.sh
index 5aa75a0a1cede..946735bd5a252 100755
--- a/scripts/decode_stacktrace.sh
+++ b/scripts/decode_stacktrace.sh
@@ -77,8 +77,8 @@ parse_symbol() {
return
fi
- # Strip out the base of the path
- code=${code#$basepath/}
+ # Strip out the base of the path on each line
+ code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code")
# In the case of inlines, move everything to same line
code=${code//$'\n'/' '}
--
2.25.1
From: Tetsuo Handa <[email protected]>
commit 033724d6864245a11f8e04c066002e6ad22b3fd0 upstream.
syzbot is reporting general protection fault in bitfill_aligned() [1]
caused by integer underflow in bit_clear_margins(). The cause of this
problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.
If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres
is going to shrink, vc->vc_{cols,rows} will not be updated. This allows
bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or
info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will
try to overrun the __iomem region and causes general protection fault.
Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception. Since cols and lines are calculated as
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
cols /= vc->vc_font.width;
rows /= vc->vc_font.height;
vc_resize(vc, cols, rows);
in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0
and var.yres < vc->vc_font.height makes rows = 0. This means that
const int fd = open("/dev/fb0", O_ACCMODE);
struct fb_var_screeninfo var = { };
ioctl(fd, FBIOGET_VSCREENINFO, &var);
var.xres = var.yres = 1;
ioctl(fd, FBIOPUT_VSCREENINFO, &var);
easily reproduces integer underflow bug explained above.
Of course, callers of vc_resize() are not handling vc_do_resize() failure
is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore,
as a band-aid workaround, this patch checks integer underflow in
"struct fbcon_ops"->clear_margins call, assuming that
vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not
cause integer overflow.
[1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c6
Reported-and-tested-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/core/bitblit.c | 4 ++--
drivers/video/fbdev/core/fbcon_ccw.c | 4 ++--
drivers/video/fbdev/core/fbcon_cw.c | 4 ++--
drivers/video/fbdev/core/fbcon_ud.c | 4 ++--
4 files changed, 8 insertions(+), 8 deletions(-)
--- a/drivers/video/fbdev/core/bitblit.c
+++ b/drivers/video/fbdev/core/bitblit.c
@@ -216,7 +216,7 @@ static void bit_clear_margins(struct vc_
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dx = info->var.xoffset + rs;
region.dy = 0;
region.width = rw;
@@ -224,7 +224,7 @@ static void bit_clear_margins(struct vc_
info->fbops->fb_fillrect(info, ®ion);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dx = info->var.xoffset;
region.dy = info->var.yoffset + bs;
region.width = rs;
--- a/drivers/video/fbdev/core/fbcon_ccw.c
+++ b/drivers/video/fbdev/core/fbcon_ccw.c
@@ -201,7 +201,7 @@ static void ccw_clear_margins(struct vc_
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dx = 0;
region.dy = info->var.yoffset;
region.height = rw;
@@ -209,7 +209,7 @@ static void ccw_clear_margins(struct vc_
info->fbops->fb_fillrect(info, ®ion);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dx = info->var.xoffset + bs;
region.dy = 0;
region.height = info->var.yres_virtual;
--- a/drivers/video/fbdev/core/fbcon_cw.c
+++ b/drivers/video/fbdev/core/fbcon_cw.c
@@ -184,7 +184,7 @@ static void cw_clear_margins(struct vc_d
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dx = 0;
region.dy = info->var.yoffset + rs;
region.height = rw;
@@ -192,7 +192,7 @@ static void cw_clear_margins(struct vc_d
info->fbops->fb_fillrect(info, ®ion);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dx = info->var.xoffset;
region.dy = info->var.yoffset;
region.height = info->var.yres;
--- a/drivers/video/fbdev/core/fbcon_ud.c
+++ b/drivers/video/fbdev/core/fbcon_ud.c
@@ -231,7 +231,7 @@ static void ud_clear_margins(struct vc_d
region.color = color;
region.rop = ROP_COPY;
- if (rw && !bottom_only) {
+ if ((int) rw > 0 && !bottom_only) {
region.dy = 0;
region.dx = info->var.xoffset;
region.width = rw;
@@ -239,7 +239,7 @@ static void ud_clear_margins(struct vc_d
info->fbops->fb_fillrect(info, ®ion);
}
- if (bh) {
+ if ((int) bh > 0) {
region.dy = info->var.yoffset;
region.dx = info->var.xoffset;
region.height = bh;
From: John David Anglin <[email protected]>
commit be6577af0cef934ccb036445314072e8cb9217b9 upstream.
Stalls are quite frequent with recent kernels. I enabled
CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803]
CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3
Hardware name: 9000/800/rp3440
IAOQ[0]: d_alloc_parallel+0x384/0x688
IAOQ[1]: d_alloc_parallel+0x388/0x688
RP(r2): d_alloc_parallel+0x134/0x688
Backtrace:
[<000000004036974c>] __lookup_slow+0xa4/0x200
[<0000000040369fc8>] walk_component+0x288/0x458
[<000000004036a9a0>] path_lookupat+0x88/0x198
[<000000004036e748>] filename_lookup+0xa0/0x168
[<000000004036e95c>] user_path_at_empty+0x64/0x80
[<000000004035d93c>] vfs_statx+0x104/0x158
[<000000004035dfcc>] __do_sys_lstat64+0x44/0x80
[<000000004035e5a0>] sys_lstat64+0x20/0x38
[<0000000040180054>] syscall_exit+0x0/0x14
The code was stuck in this loop in d_alloc_parallel:
4037d414: 0e 00 10 dc ldd 0(r16),ret0
4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384>
4037d41c: 08 00 02 40 nop
This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:
static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
/*
* Assuming the lock is uncontended, this never enters
* the body of the outer loop. If it is contended, then
* within the inner loop a non-atomic test is used to
* busywait with less bus contention for a good time to
* attempt to acquire the lock bit.
*/
preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
preempt_enable();
do {
cpu_relax();
} while (test_bit(bitnum, addr));
preempt_disable();
}
#endif
__acquire(bitlock);
}
After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.
Signed-off-by: Dave Anglin <[email protected]>
Cc: [email protected]
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/include/asm/atomic.h | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -258,6 +258,8 @@ atomic64_set(atomic64_t *v, s64 i)
_atomic_spin_unlock_irqrestore(v, flags);
}
+#define atomic64_set_release(v, i) atomic64_set((v), (i))
+
static __inline__ s64
atomic64_read(const atomic64_t *v)
{
From: Qiujun Huang <[email protected]>
commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream.
In ath9k_hif_usb_rx_cb interface number is assumed to be 0.
usb_ifnum_to_if(urb->dev, 0)
But it isn't always true.
The case reported by syzbot:
https://lore.kernel.org/linux-usb/[email protected]
usb 2-1: new high-speed USB device number 2 using dummy_hcd
usb 2-1: config 1 has an invalid interface number: 2 but max is 0
usb 2-1: config 1 has no interface number 0
usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice=
1.08
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
general protection fault, probably for non-canonical address
0xdffffc0000000015: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0
Call Trace
__usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650
usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716
dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966
call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404
expire_timers kernel/time/timer.c:1449 [inline]
__run_timers kernel/time/timer.c:1773 [inline]
__run_timers kernel/time/timer.c:1740 [inline]
run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786
__do_softirq+0x21e/0x950 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x178/0x1a0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
Reported-and-tested-by: [email protected]
Signed-off-by: Qiujun Huang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Viktor Jägersküpper <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/wireless/ath/ath9k/hif_usb.c | 48 +++++++++++++++++++++++--------
drivers/net/wireless/ath/ath9k/hif_usb.h | 5 +++
2 files changed, 42 insertions(+), 11 deletions(-)
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -641,9 +641,9 @@ err:
static void ath9k_hif_usb_rx_cb(struct urb *urb)
{
- struct sk_buff *skb = (struct sk_buff *) urb->context;
- struct hif_device_usb *hif_dev =
- usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+ struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+ struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+ struct sk_buff *skb = rx_buf->skb;
int ret;
if (!skb)
@@ -683,14 +683,15 @@ resubmit:
return;
free:
kfree_skb(skb);
+ kfree(rx_buf);
}
static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
{
- struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct rx_buf *rx_buf = (struct rx_buf *)urb->context;
+ struct hif_device_usb *hif_dev = rx_buf->hif_dev;
+ struct sk_buff *skb = rx_buf->skb;
struct sk_buff *nskb;
- struct hif_device_usb *hif_dev =
- usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
int ret;
if (!skb)
@@ -748,6 +749,7 @@ resubmit:
return;
free:
kfree_skb(skb);
+ kfree(rx_buf);
urb->context = NULL;
}
@@ -793,7 +795,7 @@ static int ath9k_hif_usb_alloc_tx_urbs(s
init_usb_anchor(&hif_dev->mgmt_submitted);
for (i = 0; i < MAX_TX_URB_NUM; i++) {
- tx_buf = kzalloc(sizeof(struct tx_buf), GFP_KERNEL);
+ tx_buf = kzalloc(sizeof(*tx_buf), GFP_KERNEL);
if (!tx_buf)
goto err;
@@ -830,8 +832,9 @@ static void ath9k_hif_usb_dealloc_rx_urb
static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev)
{
- struct urb *urb = NULL;
+ struct rx_buf *rx_buf = NULL;
struct sk_buff *skb = NULL;
+ struct urb *urb = NULL;
int i, ret;
init_usb_anchor(&hif_dev->rx_submitted);
@@ -839,6 +842,12 @@ static int ath9k_hif_usb_alloc_rx_urbs(s
for (i = 0; i < MAX_RX_URB_NUM; i++) {
+ rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+ if (!rx_buf) {
+ ret = -ENOMEM;
+ goto err_rxb;
+ }
+
/* Allocate URB */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb == NULL) {
@@ -853,11 +862,14 @@ static int ath9k_hif_usb_alloc_rx_urbs(s
goto err_skb;
}
+ rx_buf->hif_dev = hif_dev;
+ rx_buf->skb = skb;
+
usb_fill_bulk_urb(urb, hif_dev->udev,
usb_rcvbulkpipe(hif_dev->udev,
USB_WLAN_RX_PIPE),
skb->data, MAX_RX_BUF_SIZE,
- ath9k_hif_usb_rx_cb, skb);
+ ath9k_hif_usb_rx_cb, rx_buf);
/* Anchor URB */
usb_anchor_urb(urb, &hif_dev->rx_submitted);
@@ -883,6 +895,8 @@ err_submit:
err_skb:
usb_free_urb(urb);
err_urb:
+ kfree(rx_buf);
+err_rxb:
ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
return ret;
}
@@ -894,14 +908,21 @@ static void ath9k_hif_usb_dealloc_reg_in
static int ath9k_hif_usb_alloc_reg_in_urbs(struct hif_device_usb *hif_dev)
{
- struct urb *urb = NULL;
+ struct rx_buf *rx_buf = NULL;
struct sk_buff *skb = NULL;
+ struct urb *urb = NULL;
int i, ret;
init_usb_anchor(&hif_dev->reg_in_submitted);
for (i = 0; i < MAX_REG_IN_URB_NUM; i++) {
+ rx_buf = kzalloc(sizeof(*rx_buf), GFP_KERNEL);
+ if (!rx_buf) {
+ ret = -ENOMEM;
+ goto err_rxb;
+ }
+
/* Allocate URB */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (urb == NULL) {
@@ -916,11 +937,14 @@ static int ath9k_hif_usb_alloc_reg_in_ur
goto err_skb;
}
+ rx_buf->hif_dev = hif_dev;
+ rx_buf->skb = skb;
+
usb_fill_int_urb(urb, hif_dev->udev,
usb_rcvintpipe(hif_dev->udev,
USB_REG_IN_PIPE),
skb->data, MAX_REG_IN_BUF_SIZE,
- ath9k_hif_usb_reg_in_cb, skb, 1);
+ ath9k_hif_usb_reg_in_cb, rx_buf, 1);
/* Anchor URB */
usb_anchor_urb(urb, &hif_dev->reg_in_submitted);
@@ -946,6 +970,8 @@ err_submit:
err_skb:
usb_free_urb(urb);
err_urb:
+ kfree(rx_buf);
+err_rxb:
ath9k_hif_usb_dealloc_reg_in_urbs(hif_dev);
return ret;
}
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -86,6 +86,11 @@ struct tx_buf {
struct list_head list;
};
+struct rx_buf {
+ struct sk_buff *skb;
+ struct hif_device_usb *hif_dev;
+};
+
#define HIF_USB_TX_STOP BIT(0)
#define HIF_USB_TX_FLUSH BIT(1)
From: Hugh Dickins <[email protected]>
commit 8d22a9351035ef2ff12ef163a1091b8b8cf1e49c upstream.
It was hard to keep a test running, moving tasks between memcgs with
move_charge_at_immigrate, while swapping: mem_cgroup_id_get_many()'s
refcount is discovered to be 0 (supposedly impossible), so it is then
forced to REFCOUNT_SATURATED, and after thousands of warnings in quick
succession, the test is at last put out of misery by being OOM killed.
This is because of the way moved_swap accounting was saved up until the
task move gets completed in __mem_cgroup_clear_mc(), deferred from when
mem_cgroup_move_swap_account() actually exchanged old and new ids.
Concurrent activity can free up swap quicker than the task is scanned,
bringing id refcount down 0 (which should only be possible when
offlining).
Just skip that optimization: do that part of the accounting immediately.
Fixes: 615d66c37c75 ("mm: memcontrol: fix memcg id ref counter on swap charge move")
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Alex Shi <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Alex Shi <[email protected]>
Cc: Shakeel Butt <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4883,7 +4883,6 @@ static void __mem_cgroup_clear_mc(void)
if (!mem_cgroup_is_root(mc.to))
page_counter_uncharge(&mc.to->memory, mc.moved_swap);
- mem_cgroup_id_get_many(mc.to, mc.moved_swap);
css_put_many(&mc.to->css, mc.moved_swap);
mc.moved_swap = 0;
@@ -5074,7 +5073,8 @@ put: /* get_mctgt_type() gets the page
ent = target.ent;
if (!mem_cgroup_move_swap_account(ent, mc.from, mc.to)) {
mc.precharge--;
- /* we fixup refcnts and charges later. */
+ mem_cgroup_id_get_many(mc.to, 1);
+ /* we fixup other refcnts and charges later. */
mc.moved_swap++;
}
break;
From: Fangrui Song <[email protected]>
commit ca9b31f6bb9c6aa9b4e5f0792f39a97bbffb8c51 upstream.
When CROSS_COMPILE is set (e.g. aarch64-linux-gnu-), if
$(CROSS_COMPILE)elfedit is found at /usr/bin/aarch64-linux-gnu-elfedit,
GCC_TOOLCHAIN_DIR will be set to /usr/bin/. --prefix= will be set to
/usr/bin/ and Clang as of 11 will search for both
$(prefix)aarch64-linux-gnu-$needle and $(prefix)$needle.
GCC searchs for $(prefix)aarch64-linux-gnu/$version/$needle,
$(prefix)aarch64-linux-gnu/$needle and $(prefix)$needle. In practice,
$(prefix)aarch64-linux-gnu/$needle rarely contains executables.
To better model how GCC's -B/--prefix takes in effect in practice, newer
Clang (since
https://github.com/llvm/llvm-project/commit/3452a0d8c17f7166f479706b293caf6ac76ffd90)
only searches for $(prefix)$needle. Currently it will find /usr/bin/as
instead of /usr/bin/aarch64-linux-gnu-as.
Set --prefix= to $(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
(/usr/bin/aarch64-linux-gnu-) so that newer Clang can find the
appropriate cross compiling GNU as (when -no-integrated-as is in
effect).
Cc: [email protected]
Reported-by: Nathan Chancellor <[email protected]>
Signed-off-by: Fangrui Song <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/Makefile
+++ b/Makefile
@@ -482,7 +482,7 @@ ifeq ($(cc-name),clang)
ifneq ($(CROSS_COMPILE),)
CLANG_FLAGS += --target=$(notdir $(CROSS_COMPILE:%-=%))
GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE)elfedit))
-CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)
+CLANG_FLAGS += --prefix=$(GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE))
GCC_TOOLCHAIN := $(realpath $(GCC_TOOLCHAIN_DIR)/..)
endif
ifneq ($(GCC_TOOLCHAIN),)
From: Liu Jian <[email protected]>
[ Upstream commit 5dbaeb87f2b309936be0aeae00cbc9e7f20ab296 ]
When mlxsw_core_trap_register fails in mlxsw_emad_init,
destroy_workqueue() shouled be called to destroy mlxsw_core->emad_wq.
Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock")
Signed-off-by: Liu Jian <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core.c b/drivers/net/ethernet/mellanox/mlxsw/core.c
index fad26046e1595..96f9f267d16d4 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core.c
@@ -619,7 +619,7 @@ static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core)
err = mlxsw_core_trap_register(mlxsw_core, &mlxsw_emad_rx_listener,
mlxsw_core);
if (err)
- return err;
+ goto err_trap_register;
err = mlxsw_core->driver->basic_trap_groups_set(mlxsw_core);
if (err)
@@ -631,6 +631,7 @@ static int mlxsw_emad_init(struct mlxsw_core *mlxsw_core)
err_emad_trap_set:
mlxsw_core_trap_unregister(mlxsw_core, &mlxsw_emad_rx_listener,
mlxsw_core);
+err_trap_register:
destroy_workqueue(mlxsw_core->emad_wq);
return err;
}
--
2.25.1
From: Serge Semin <[email protected]>
commit 551e553f0d4ab623e2a6f424ab5834f9c7b5229c upstream.
Commit 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.
Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c064ec3 ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.
A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.
Link: https://lore.kernel.org/linux-serial/[email protected]
Fixes: 7b668c064ec3 ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler <[email protected]>
Signed-off-by: Serge Semin <[email protected]>
Cc: stable <[email protected]>
Tested-by: Claire Chang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/tty/serial/8250/8250_mtk.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -45,8 +45,21 @@ mtk8250_set_termios(struct uart_port *po
unsigned long flags;
unsigned int baud, quot;
+ /*
+ * Store the requested baud rate before calling the generic 8250
+ * set_termios method. Standard 8250 port expects bauds to be
+ * no higher than (uartclk / 16) so the baud will be clamped if it
+ * gets out of that bound. Mediatek 8250 port supports speed
+ * higher than that, therefore we'll get original baud rate back
+ * after calling the generic set_termios method and recalculate
+ * the speed later in this method.
+ */
+ baud = tty_termios_baud_rate(termios);
+
serial8250_do_set_termios(port, termios, old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
/*
* Mediatek UARTs use an extra highspeed register (UART_MTK_HIGHS)
*
@@ -85,6 +98,11 @@ mtk8250_set_termios(struct uart_port *po
*/
spin_lock_irqsave(&port->lock, flags);
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
/* set DLAB we have cval saved in up->lcr from the call to the core */
serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
serial_dl_write(up, quot);
From: Chunfeng Yun <[email protected]>
commit 5ce1a24dd98c00a57a8fa13660648abf7e08e3ef upstream.
The wMaxPacketSize field of endpoint descriptor may be zero
as default value in alternate interface, and they are not
actually selected when start stream, so skip them when try to
allocate bandwidth.
Cc: stable <[email protected]>
Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller")
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/xhci-mtk-sch.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -284,6 +284,10 @@ static bool need_bw_sch(struct usb_host_
if (is_fs_or_ls(speed) && !has_tt)
return false;
+ /* skip endpoint with zero maxpkt */
+ if (usb_endpoint_maxp(&ep->desc) == 0)
+ return false;
+
return true;
}
From: Tetsuo Handa <[email protected]>
commit f867c771f98891841c217fa8459244ed0dd28921 upstream.
syzbot is reporting that mmput() from shrinker function has a risk of
deadlock [1], for delayed_uprobe_add() from update_ref_ctr() calls
kzalloc(GFP_KERNEL) with delayed_uprobe_lock held, and
uprobe_clear_state() from __mmput() also holds delayed_uprobe_lock.
Commit a1b2289cef92ef0e ("android: binder: drop lru lock in isolate
callback") replaced mmput() with mmput_async() in order to avoid sleeping
with spinlock held. But this patch replaces mmput() with mmput_async() in
order not to start __mmput() from shrinker context.
[1] https://syzkaller.appspot.com/bug?id=bc9e7303f537c41b2b0cc2dfcea3fc42964c2d45
Reported-by: syzbot <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: Tetsuo Handa <[email protected]>
Reviewed-by: Michal Hocko <[email protected]>
Acked-by: Todd Kjos <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/android/binder_alloc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -968,7 +968,7 @@ enum lru_status binder_alloc_free_page(s
trace_binder_unmap_user_end(alloc, index);
}
up_read(&mm->mmap_sem);
- mmput(mm);
+ mmput_async(mm);
trace_binder_unmap_kernel_start(alloc, index);
From: Taehee Yoo <[email protected]>
[ Upstream commit 544f287b84959203367cd29e16e772717612fab4 ]
If register_netdevice() is failed, net_device should not be used
because variables are uninitialized or freed.
So, the routine should be stopped immediately.
But, bond_create() doesn't check return value of register_netdevice()
immediately. That will result in a panic because of using uninitialized
or freed memory.
Test commands:
modprobe netdev-notifier-error-inject
echo -22 > /sys/kernel/debug/notifier-error-inject/netdev/\
actions/NETDEV_REGISTER/error
modprobe bonding max_bonds=3
Splat looks like:
[ 375.028492][ T193] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[ 375.033207][ T193] CPU: 2 PID: 193 Comm: kworker/2:2 Not tainted 5.8.0-rc4+ #645
[ 375.036068][ T193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 375.039673][ T193] Workqueue: events linkwatch_event
[ 375.041557][ T193] RIP: 0010:dev_activate+0x4a/0x340
[ 375.043381][ T193] Code: 40 a8 04 0f 85 db 00 00 00 8b 83 08 04 00 00 85 c0 0f 84 0d 01 00 00 31 d2 89 d0 48 8d 04 40 48 c1 e0 07 48 03 83 00 04 00 00 <48> 8b 48 10 f6 41 10 01 75 08 f0 80 a1 a0 01 00 00 fd 48 89 48 08
[ 375.050267][ T193] RSP: 0018:ffff9f8facfcfdd8 EFLAGS: 00010202
[ 375.052410][ T193] RAX: 6b6b6b6b6b6b6b6b RBX: ffff9f8fae6ea000 RCX: 0000000000000006
[ 375.055178][ T193] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f8fae6ea000
[ 375.057762][ T193] RBP: ffff9f8fae6ea000 R08: 0000000000000000 R09: 0000000000000000
[ 375.059810][ T193] R10: 0000000000000001 R11: 0000000000000000 R12: ffff9f8facfcfe08
[ 375.061892][ T193] R13: ffffffff883587e0 R14: 0000000000000000 R15: ffff9f8fae6ea580
[ 375.063931][ T193] FS: 0000000000000000(0000) GS:ffff9f8fbae00000(0000) knlGS:0000000000000000
[ 375.066239][ T193] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 375.067841][ T193] CR2: 00007f2f542167a0 CR3: 000000012cee6002 CR4: 00000000003606e0
[ 375.069657][ T193] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 375.071471][ T193] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 375.073269][ T193] Call Trace:
[ 375.074005][ T193] linkwatch_do_dev+0x4d/0x50
[ 375.075052][ T193] __linkwatch_run_queue+0x10b/0x200
[ 375.076244][ T193] linkwatch_event+0x21/0x30
[ 375.077274][ T193] process_one_work+0x252/0x600
[ 375.078379][ T193] ? process_one_work+0x600/0x600
[ 375.079518][ T193] worker_thread+0x3c/0x380
[ 375.080534][ T193] ? process_one_work+0x600/0x600
[ 375.081668][ T193] kthread+0x139/0x150
[ 375.082567][ T193] ? kthread_park+0x90/0x90
[ 375.083567][ T193] ret_from_fork+0x22/0x30
Fixes: e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index fef599eb822b6..1f867e275408e 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4773,15 +4773,19 @@ int bond_create(struct net *net, const char *name)
bond_dev->rtnl_link_ops = &bond_link_ops;
res = register_netdevice(bond_dev);
+ if (res < 0) {
+ free_netdev(bond_dev);
+ rtnl_unlock();
+
+ return res;
+ }
netif_carrier_off(bond_dev);
bond_work_init_all(bond);
rtnl_unlock();
- if (res < 0)
- free_netdev(bond_dev);
- return res;
+ return 0;
}
static int __net_init bond_net_init(struct net *net)
--
2.25.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 81e96851ea32deb2c921c870eecabf335f598aeb ]
The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:
arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
cmp $0xffffffff,-24(%ebp)
^
Make this a 32-bit comparison, which it was clearly meant to be.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/math-emu/wm_sqrt.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S
index f031c0e193565..515cdee90df72 100644
--- a/arch/x86/math-emu/wm_sqrt.S
+++ b/arch/x86/math-emu/wm_sqrt.S
@@ -209,7 +209,7 @@ sqrt_stage_2_finish:
#ifdef PARANOID
/* It should be possible to get here only if the arg is ffff....ffff */
- cmp $0xffffffff,FPU_fsqrt_arg_1
+ cmpl $0xffffffff,FPU_fsqrt_arg_1
jnz sqrt_stage_2_error
#endif /* PARANOID */
--
2.25.1
From: Ilya Katsnelson <[email protected]>
[ Upstream commit dcb00fc799dc03fd320e123e4c81b3278c763ea5 ]
Tested on my own laptop, touchpad feels slightly more responsive with
this on, though it might just be placebo.
Signed-off-by: Ilya Katsnelson <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/mouse/synaptics.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 85db184321f78..0714d572e49a3 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -182,6 +182,7 @@ static const char * const smbus_pnp_ids[] = {
"LEN0093", /* T480 */
"LEN0096", /* X280 */
"LEN0097", /* X280 -> ALPS trackpoint */
+ "LEN0099", /* X1 Extreme 1st */
"LEN009b", /* T580 */
"LEN200f", /* T450s */
"LEN2044", /* L470 */
--
2.25.1
From: Will Deacon <[email protected]>
[ Upstream commit 5afc78551bf5d53279036e0bf63314e35631d79f ]
Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/debug-monitors.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index db7ed460a5476..2ccd0a99d8b35 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -389,14 +389,14 @@ void user_rewind_single_step(struct task_struct *task)
* If single step is active for this thread, then set SPSR.SS
* to 1 to avoid returning to the active-pending state.
*/
- if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+ if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
set_regs_spsr_ss(task_pt_regs(task));
}
NOKPROBE_SYMBOL(user_rewind_single_step);
void user_fastforward_single_step(struct task_struct *task)
{
- if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+ if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
clear_regs_spsr_ss(task_pt_regs(task));
}
--
2.25.1
From: Chen-Yu Tsai <[email protected]>
[ Upstream commit baa1841eb797eadce6c907bdaed7cd6f01815404 ]
When the extra HPD polling in sun4i_hdmi was removed, the result of
HPD was accidentally inverted.
Fix this by inverting the check.
Fixes: bda8eaa6dee7 ("drm: sun4i: hdmi: Remove extra HPD polling")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Tested-by: Mans Rullgard <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 82cb939351889..c9f1a8cd5f2ac 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -215,7 +215,7 @@ sun4i_hdmi_connector_detect(struct drm_connector *connector, bool force)
unsigned long reg;
reg = readl(hdmi->base + SUN4I_HDMI_HPD_REG);
- if (reg & SUN4I_HDMI_HPD_HIGH) {
+ if (!(reg & SUN4I_HDMI_HPD_HIGH)) {
cec_phys_addr_invalidate(hdmi->cec_adap);
return connector_status_disconnected;
}
--
2.25.1
From: Evgeny Novikov <[email protected]>
[ Upstream commit c8f8529e2c4141afa2ebb487ad48e8a6ec3e8c99 ]
gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/gr_udc.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index feb73a1c42ef9..be094f4e116b1 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -2000,9 +2000,12 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)
if (num == 0) {
_req = gr_alloc_request(&ep->ep, GFP_ATOMIC);
+ if (!_req)
+ return -ENOMEM;
+
buf = devm_kzalloc(dev->dev, PAGE_SIZE, GFP_DMA | GFP_ATOMIC);
- if (!_req || !buf) {
- /* possible _req freed by gr_probe via gr_remove */
+ if (!buf) {
+ gr_free_request(&ep->ep, _req);
return -ENOMEM;
}
--
2.25.1
From: Wang Hai <[email protected]>
[ Upstream commit bca9749b1aa23d964d3ab930938af66dbf887f15 ]
If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.
Fixes: 7d2911c43815 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wang Hai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/smsc/smc91x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c
index 96ac0d3af6f5b..f570a37c68c23 100644
--- a/drivers/net/ethernet/smsc/smc91x.c
+++ b/drivers/net/ethernet/smsc/smc91x.c
@@ -2294,7 +2294,7 @@ static int smc_drv_probe(struct platform_device *pdev)
ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio,
"power", 0, 0, 100);
if (ret)
- return ret;
+ goto out_free_netdev;
/*
* Optional reset GPIO configured? Minimum 100 ns reset needed
@@ -2303,7 +2303,7 @@ static int smc_drv_probe(struct platform_device *pdev)
ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio,
"reset", 0, 0, 100);
if (ret)
- return ret;
+ goto out_free_netdev;
/*
* Need to wait for optional EEPROM to load, max 750 us according
--
2.25.1
From: Evgeny Novikov <[email protected]>
[ Upstream commit bc4071aafcf4d0535ee423b69167696d6c03207d ]
aspeed_create_fan() reads a pwm_port value using of_property_read_u32().
If pwm_port will be more than ARRAY_SIZE(pwm_port_params), there will be
a buffer overflow in
aspeed_create_pwm_port()->aspeed_set_pwm_port_enable(). The patch fixes
the potential buffer overflow.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/aspeed-pwm-tacho.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
index 69b97d45e3cbb..e4337e9dda444 100644
--- a/drivers/hwmon/aspeed-pwm-tacho.c
+++ b/drivers/hwmon/aspeed-pwm-tacho.c
@@ -878,6 +878,8 @@ static int aspeed_create_fan(struct device *dev,
ret = of_property_read_u32(child, "reg", &pwm_port);
if (ret)
return ret;
+ if (pwm_port >= ARRAY_SIZE(pwm_port_params))
+ return -EINVAL;
aspeed_create_pwm_port(priv, (u8)pwm_port);
ret = of_property_count_u8_elems(child, "cooling-levels");
--
2.25.1
From: Ian Abbott <[email protected]>
commit fc846e9db67c7e808d77bf9e2ef3d49e3820ce5d upstream.
The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked. Shift amounts greater than or equal to 32 will result in
undefined behavior. Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity. Only channels 0 to 15
are valid.
Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <[email protected]> #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it
Cc: <[email protected]> #4.0+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/addi_apci_1500.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
--- a/drivers/staging/comedi/drivers/addi_apci_1500.c
+++ b/drivers/staging/comedi/drivers/addi_apci_1500.c
@@ -461,13 +461,14 @@ static int apci1500_di_cfg_trig(struct c
struct apci1500_private *devpriv = dev->private;
unsigned int trig = data[1];
unsigned int shift = data[3];
- unsigned int hi_mask = data[4] << shift;
- unsigned int lo_mask = data[5] << shift;
- unsigned int chan_mask = hi_mask | lo_mask;
- unsigned int old_mask = (1 << shift) - 1;
+ unsigned int hi_mask;
+ unsigned int lo_mask;
+ unsigned int chan_mask;
+ unsigned int old_mask;
unsigned int pm;
unsigned int pt;
unsigned int pp;
+ unsigned int invalid_chan;
if (trig > 1) {
dev_dbg(dev->class_dev,
@@ -475,7 +476,20 @@ static int apci1500_di_cfg_trig(struct c
return -EINVAL;
}
- if (chan_mask > 0xffff) {
+ if (shift <= 16) {
+ hi_mask = data[4] << shift;
+ lo_mask = data[5] << shift;
+ old_mask = (1U << shift) - 1;
+ invalid_chan = (data[4] | data[5]) >> (16 - shift);
+ } else {
+ hi_mask = 0;
+ lo_mask = 0;
+ old_mask = 0xffff;
+ invalid_chan = data[4] | data[5];
+ }
+ chan_mask = hi_mask | lo_mask;
+
+ if (invalid_chan) {
dev_dbg(dev->class_dev, "invalid digital trigger channel\n");
return -EINVAL;
}
From: Xie He <[email protected]>
[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]
When this driver transmits data,
first this driver will remove a pseudo header of 1 byte,
then the lapb module will prepend the LAPB header of 2 or 3 bytes,
then this driver will prepend a length field of 2 bytes,
then the underlying Ethernet device will prepend its own header.
So, the header length required should be:
-1 + 3 + 2 + "the header length needed by the underlying device".
This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.
Signed-off-by: Xie He <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wan/lapbether.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 0e3f8ed84660e..ac34257e9f203 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -308,7 +308,6 @@ static void lapbeth_setup(struct net_device *dev)
dev->netdev_ops = &lapbeth_netdev_ops;
dev->needs_free_netdev = true;
dev->type = ARPHRD_X25;
- dev->hard_header_len = 3;
dev->mtu = 1000;
dev->addr_len = 0;
}
@@ -329,6 +328,14 @@ static int lapbeth_new_device(struct net_device *dev)
if (!ndev)
goto out;
+ /* When transmitting data:
+ * first this driver removes a pseudo header of 1 byte,
+ * then the lapb module prepends an LAPB header of at most 3 bytes,
+ * then this driver prepends a length field of 2 bytes,
+ * then the underlying Ethernet device prepends its own header.
+ */
+ ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len;
+
lapbeth = netdev_priv(ndev);
lapbeth->axdev = ndev;
--
2.25.1
From: Dinghao Liu <[email protected]>
[ Upstream commit 5b78fac4b1ba731cf4177fdbc1e3a4661521bcd0 ]
pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/tegra210-adma.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 045351f3549c1..86b45198fb962 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -583,6 +583,7 @@ static int tegra_adma_alloc_chan_resources(struct dma_chan *dc)
ret = pm_runtime_get_sync(tdc2dev(tdc));
if (ret < 0) {
+ pm_runtime_put_noidle(tdc2dev(tdc));
free_irq(tdc->irq, tdc);
return ret;
}
@@ -764,8 +765,10 @@ static int tegra_adma_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
ret = pm_runtime_get_sync(&pdev->dev);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_noidle(&pdev->dev);
goto rpm_disable;
+ }
ret = tegra_adma_init(tdma);
if (ret)
--
2.25.1
From: Federico Ricchiuto <[email protected]>
[ Upstream commit 43e666acb79f3d355dd89bf20f4d25d3b15da13e ]
The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
index 681ac9bc68b3d..f98c1e1b1dbdc 100644
--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -373,6 +373,14 @@ static const struct dmi_system_id i2c_hid_dmi_desc_override_table[] = {
},
.driver_data = (void *)&sipodev_desc
},
+ {
+ .ident = "Mediacom FlexBook edge 13",
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDIACOM"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "FlexBook_edge13-M-FBE13"),
+ },
+ .driver_data = (void *)&sipodev_desc
+ },
{
.ident = "Odys Winbook 13",
.matches = {
--
2.25.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit 861254d826499944cb4d9b5a15f5a794a6b99a69 ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Signed-off-by: Navid Emamdoost <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/gpio-arizona.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index e09834b91ea52..694674dfbf82a 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -69,6 +69,7 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
ret = pm_runtime_get_sync(chip->parent);
if (ret < 0) {
dev_err(chip->parent, "Failed to resume: %d\n", ret);
+ pm_runtime_put_autosuspend(chip->parent);
return ret;
}
@@ -77,12 +78,15 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
if (ret < 0) {
dev_err(chip->parent, "Failed to drop cache: %d\n",
ret);
+ pm_runtime_put_autosuspend(chip->parent);
return ret;
}
ret = regmap_read(arizona->regmap, reg, &val);
- if (ret < 0)
+ if (ret < 0) {
+ pm_runtime_put_autosuspend(chip->parent);
return ret;
+ }
pm_runtime_mark_last_busy(chip->parent);
pm_runtime_put_autosuspend(chip->parent);
--
2.25.1
From: Rustam Kovhaev <[email protected]>
commit faaff9765664009c1c7c65551d32e9ed3b1dda8f upstream.
As syzkaller detected, wlan-ng driver does not do sanity check of
endpoints in prism2sta_probe_usb(), add check for xfer direction and type
Reported-and-tested-by: [email protected]
Link: https://syzkaller.appspot.com/bug?extid=c2a1fa67c02faa0de723
Signed-off-by: Rustam Kovhaev <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/wlan-ng/prism2usb.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/staging/wlan-ng/prism2usb.c
+++ b/drivers/staging/wlan-ng/prism2usb.c
@@ -61,11 +61,25 @@ static int prism2sta_probe_usb(struct us
const struct usb_device_id *id)
{
struct usb_device *dev;
-
+ const struct usb_endpoint_descriptor *epd;
+ const struct usb_host_interface *iface_desc = interface->cur_altsetting;
struct wlandevice *wlandev = NULL;
struct hfa384x *hw = NULL;
int result = 0;
+ if (iface_desc->desc.bNumEndpoints != 2) {
+ result = -ENODEV;
+ goto failed;
+ }
+
+ result = -EINVAL;
+ epd = &iface_desc->endpoint[1].desc;
+ if (!usb_endpoint_is_bulk_in(epd))
+ goto failed;
+ epd = &iface_desc->endpoint[2].desc;
+ if (!usb_endpoint_is_bulk_out(epd))
+ goto failed;
+
dev = interface_to_usbdev(interface);
wlandev = create_wlan();
if (!wlandev) {
From: Thomas Gleixner <[email protected]>
[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ]
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.
Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.
Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kernel/apic/io_apic.c | 10 +++++-----
arch/x86/kernel/apic/msi.c | 16 +++++++++++-----
arch/x86/kernel/apic/vector.c | 1 -
arch/x86/platform/uv/uv_irq.c | 3 ++-
drivers/iommu/amd_iommu.c | 5 +++--
drivers/iommu/intel_irq_remapping.c | 2 +-
drivers/pci/host/vmd.c | 5 +++--
7 files changed, 25 insertions(+), 17 deletions(-)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2271adbc3c42a..b5652233e6745 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2233,12 +2233,12 @@ static int mp_irqdomain_create(int ioapic)
ip->irqdomain = irq_domain_create_linear(fn, hwirqs, cfg->ops,
(void *)(long)ioapic);
- /* Release fw handle if it was allocated above */
- if (!cfg->dev)
- irq_domain_free_fwnode(fn);
-
- if (!ip->irqdomain)
+ if (!ip->irqdomain) {
+ /* Release fw handle if it was allocated above */
+ if (!cfg->dev)
+ irq_domain_free_fwnode(fn);
return -ENOMEM;
+ }
ip->irqdomain->parent = parent;
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index f10e7f93b0e2c..8c102d62b8596 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -149,10 +149,11 @@ void __init arch_init_msi_domain(struct irq_domain *parent)
msi_default_domain =
pci_msi_create_irq_domain(fn, &pci_msi_domain_info,
parent);
- irq_domain_free_fwnode(fn);
}
- if (!msi_default_domain)
+ if (!msi_default_domain) {
+ irq_domain_free_fwnode(fn);
pr_warn("failed to initialize irqdomain for MSI/MSI-x.\n");
+ }
}
#ifdef CONFIG_IRQ_REMAP
@@ -185,7 +186,8 @@ struct irq_domain *arch_create_remap_msi_irq_domain(struct irq_domain *parent,
if (!fn)
return NULL;
d = pci_msi_create_irq_domain(fn, &pci_msi_ir_domain_info, parent);
- irq_domain_free_fwnode(fn);
+ if (!d)
+ irq_domain_free_fwnode(fn);
return d;
}
#endif
@@ -248,7 +250,8 @@ static struct irq_domain *dmar_get_irq_domain(void)
if (fn) {
dmar_domain = msi_create_irq_domain(fn, &dmar_msi_domain_info,
x86_vector_domain);
- irq_domain_free_fwnode(fn);
+ if (!dmar_domain)
+ irq_domain_free_fwnode(fn);
}
out:
mutex_unlock(&dmar_lock);
@@ -373,7 +376,10 @@ struct irq_domain *hpet_create_irq_domain(int hpet_id)
}
d = msi_create_irq_domain(fn, domain_info, parent);
- irq_domain_free_fwnode(fn);
+ if (!d) {
+ irq_domain_free_fwnode(fn);
+ kfree(domain_info);
+ }
return d;
}
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index b958082c74a77..36cd34524ac19 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -457,7 +457,6 @@ int __init arch_early_irq_init(void)
x86_vector_domain = irq_domain_create_tree(fn, &x86_vector_domain_ops,
NULL);
BUG_ON(x86_vector_domain == NULL);
- irq_domain_free_fwnode(fn);
irq_set_default_host(x86_vector_domain);
arch_init_msi_domain(x86_vector_domain);
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index 03fc397335b74..c9fc725a1dcf4 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -171,9 +171,10 @@ static struct irq_domain *uv_get_irq_domain(void)
goto out;
uv_domain = irq_domain_create_tree(fn, &uv_domain_ops, NULL);
- irq_domain_free_fwnode(fn);
if (uv_domain)
uv_domain->parent = x86_vector_domain;
+ else
+ irq_domain_free_fwnode(fn);
out:
mutex_unlock(&uv_lock);
diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 778f167be2d35..494caaa265af0 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -4394,9 +4394,10 @@ int amd_iommu_create_irq_domain(struct amd_iommu *iommu)
if (!fn)
return -ENOMEM;
iommu->ir_domain = irq_domain_create_tree(fn, &amd_ir_domain_ops, iommu);
- irq_domain_free_fwnode(fn);
- if (!iommu->ir_domain)
+ if (!iommu->ir_domain) {
+ irq_domain_free_fwnode(fn);
return -ENOMEM;
+ }
iommu->ir_domain->parent = arch_get_ir_parent_domain();
iommu->msi_domain = arch_create_remap_msi_irq_domain(iommu->ir_domain,
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index 25842b566c39c..154949a499c21 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -536,8 +536,8 @@ static int intel_setup_irq_remapping(struct intel_iommu *iommu)
0, INTR_REMAP_TABLE_ENTRIES,
fn, &intel_ir_domain_ops,
iommu);
- irq_domain_free_fwnode(fn);
if (!iommu->ir_domain) {
+ irq_domain_free_fwnode(fn);
pr_err("IR%d: failed to allocate irqdomain\n", iommu->seq_id);
goto out_free_bitmap;
}
diff --git a/drivers/pci/host/vmd.c b/drivers/pci/host/vmd.c
index af6d5da10ea5f..05f191ae0ff1b 100644
--- a/drivers/pci/host/vmd.c
+++ b/drivers/pci/host/vmd.c
@@ -638,9 +638,10 @@ static int vmd_enable_domain(struct vmd_dev *vmd)
vmd->irq_domain = pci_msi_create_irq_domain(fn, &vmd_msi_domain_info,
x86_vector_domain);
- irq_domain_free_fwnode(fn);
- if (!vmd->irq_domain)
+ if (!vmd->irq_domain) {
+ irq_domain_free_fwnode(fn);
return -ENODEV;
+ }
pci_add_resource(&resources, &vmd->resources[0]);
pci_add_resource(&resources, &vmd->resources[1]);
--
2.25.1
From: Max Filippov <[email protected]>
[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]
Building xtensa kernel with gcc-10 produces the following warnings:
arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
for built-in function ‘__sync_fetch_and_and_4’;
expected ‘unsigned int(volatile void *, unsigned int)’
[-Wbuiltin-declaration-mismatch]
arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
for built-in function ‘__sync_fetch_and_or_4’;
expected ‘unsigned int(volatile void *, unsigned int)’
[-Wbuiltin-declaration-mismatch]
Fix declarations of these functions to avoid the warning.
Signed-off-by: Max Filippov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/xtensa/kernel/xtensa_ksyms.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index dc7b470a423a6..58b79e2ea569c 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -82,13 +82,13 @@ void __xtensa_libgcc_window_spill(void)
}
EXPORT_SYMBOL(__xtensa_libgcc_window_spill);
-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v)
{
BUG();
}
EXPORT_SYMBOL(__sync_fetch_and_and_4);
-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v)
{
BUG();
}
--
2.25.1
From: Vasundhara Volam <[email protected]>
[ Upstream commit 163e9ef63641a02de4c95cd921577265c52e1ce2 ]
The driver was modified to not rely on rtnl lock to protect link
settings about 2 years ago. The pause setting was missed when
making that change. Fix it by acquiring link_lock mutex before
calling bnxt_hwrm_set_pause().
Fixes: e2dc9b6e38fa ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.")
Signed-off-by: Vasundhara Volam <[email protected]>
Reviewed-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
index 3c78cd1cdd6fb..6edbbfc1709a2 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -1287,8 +1287,11 @@ static int bnxt_set_pauseparam(struct net_device *dev,
if (epause->tx_pause)
link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_TX;
- if (netif_running(dev))
+ if (netif_running(dev)) {
+ mutex_lock(&bp->link_lock);
rc = bnxt_hwrm_set_pause(bp);
+ mutex_unlock(&bp->link_lock);
+ }
return rc;
}
--
2.25.1
On 7/27/20 8:03 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.190 release.
> There are 64 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jul 2020 13:48:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.190-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan <[email protected]>
thanks,
-- Shuah
On Mon, 27 Jul 2020 at 19:37, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.190 release.
> There are 64 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jul 2020 13:48:51 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.190-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.14.190-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: f238f865e7549f70e465fb28f92c863900e76455
git describe: v4.14.189-65-gf238f865e754
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.189-65-gf238f865e754
No regressions (compared to build v4.14.189)
No fixes (compared to build v4.14.189)
Ran 31258 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* igt-gpu-tools
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-dio-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-mm-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* ltp-commands-tests
* ltp-controllers-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net
* ssuite
--
Linaro LKFT
https://lkft.linaro.org
On Mon, Jul 27, 2020 at 04:03:39PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.190 release.
> There are 64 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 29 Jul 2020 13:48:51 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 408 pass: 408 fail: 0
Guenter