This is the start of the stable review cycle for the 4.14.270 release.
There are 42 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 09 Mar 2022 09:16:25 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.270-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.270-rc1
Vladimir Oltean <[email protected]>
net: dcb: disable softirqs in dcbnl_flush_dev()
Hugh Dickins <[email protected]>
memfd: fix F_SEAL_WRITE after shmem huge page allocated
William Mahon <[email protected]>
HID: add mapping for KEY_ALL_APPLICATIONS
Hans de Goede <[email protected]>
Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
Hans de Goede <[email protected]>
Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
Jiasheng Jiang <[email protected]>
nl80211: Handle nla_memdup failures in handle_nan_filter
Jia-Ju Bai <[email protected]>
net: chelsio: cxgb3: check the return value of pci_find_capability()
Jiasheng Jiang <[email protected]>
soc: fsl: qe: Check of ioremap return value
Randy Dunlap <[email protected]>
ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions
Vincent Mailhol <[email protected]>
can: gs_usb: change active_channels's type from atomic_t to u8
Jann Horn <[email protected]>
efivars: Respect "block" flag in efivar_entry_set_safe()
Zheyu Ma <[email protected]>
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
Randy Dunlap <[email protected]>
net: sxgbe: fix return value of __setup handler
Randy Dunlap <[email protected]>
net: stmmac: fix return value of __setup handler
Nicolas Escande <[email protected]>
mac80211: fix forwarded mesh frames AC & queue selection
Johan Hovold <[email protected]>
firmware: qemu_fw_cfg: fix kobject leak in probe error path
Qiushi Wu <[email protected]>
firmware: Fix a reference count leak.
D. Wythe <[email protected]>
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
D. Wythe <[email protected]>
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
Vladimir Oltean <[email protected]>
net: dcb: flush lingering app table entries for unregistered devices
Sven Eckelmann <[email protected]>
batman-adv: Don't expect inter-netns unique iflink indices
Sven Eckelmann <[email protected]>
batman-adv: Request iflink once in batadv_get_real_netdevice
Sven Eckelmann <[email protected]>
batman-adv: Request iflink once in batadv-on-batadv check
Florian Westphal <[email protected]>
netfilter: nf_queue: fix possible use-after-free
Florian Westphal <[email protected]>
netfilter: nf_queue: don't assume sk is full socket
Leon Romanovsky <[email protected]>
xfrm: enforce validity of offload input flags
Eric Dumazet <[email protected]>
netfilter: fix use-after-free in __nf_register_net_hook()
Jiri Bohac <[email protected]>
xfrm: fix MTU regression
Marek Vasut <[email protected]>
ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min
Zhen Ni <[email protected]>
ALSA: intel_hdmi: Fix reference to PCM buffer address
Sergey Shtylyov <[email protected]>
ata: pata_hpt37x: fix PCI clock detection
Hangyu Hua <[email protected]>
usb: gadget: clear related members when goto fail
Hangyu Hua <[email protected]>
usb: gadget: don't release an existing dev->buf
Daniele Palmas <[email protected]>
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
Wolfram Sang <[email protected]>
i2c: qup: allow COMPILE_TEST
Wolfram Sang <[email protected]>
i2c: cadence: allow COMPILE_TEST
Yongzhi Liu <[email protected]>
dmaengine: shdma: Fix runtime PM imbalance on error
Ronnie Sahlberg <[email protected]>
cifs: fix double free race when mount fails in cifs_get_root()
José Expósito <[email protected]>
Input: clear BTN_RIGHT/MIDDLE on buttonpads
Eric Anholt <[email protected]>
i2c: bcm2835: Avoid clock stretching timeouts
JaeMan Park <[email protected]>
mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work
Benjamin Beichler <[email protected]>
mac80211_hwsim: report NOACK frames in tx_status
-------------
Diffstat:
Makefile | 4 +-
arch/arm/mm/mmu.c | 2 +
drivers/ata/pata_hpt37x.c | 4 +-
drivers/dma/sh/shdma-base.c | 4 +-
drivers/firmware/efi/vars.c | 5 +-
drivers/firmware/qemu_fw_cfg.c | 10 ++--
drivers/hid/hid-debug.c | 4 +-
drivers/hid/hid-input.c | 2 +
drivers/i2c/busses/Kconfig | 4 +-
drivers/i2c/busses/i2c-bcm2835.c | 11 ++++
drivers/input/input.c | 6 +++
drivers/input/mouse/elan_i2c_core.c | 64 ++++++++---------------
drivers/net/arcnet/com20020-pci.c | 3 ++
drivers/net/can/usb/gs_usb.c | 10 ++--
drivers/net/ethernet/chelsio/cxgb3/t3_hw.c | 2 +
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 6 +--
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +--
drivers/net/usb/cdc_mbim.c | 5 ++
drivers/net/wireless/mac80211_hwsim.c | 13 +++++
drivers/soc/fsl/qe/qe_io.c | 2 +
drivers/usb/gadget/legacy/inode.c | 10 ++--
fs/cifs/cifsfs.c | 1 +
include/net/netfilter/nf_queue.h | 2 +-
include/uapi/linux/input-event-codes.h | 3 +-
include/uapi/linux/xfrm.h | 6 +++
mm/shmem.c | 7 +--
net/batman-adv/hard-interface.c | 29 ++++++----
net/dcb/dcbnl.c | 44 ++++++++++++++++
net/ipv6/ip6_output.c | 11 ++--
net/mac80211/rx.c | 4 +-
net/netfilter/core.c | 5 +-
net/netfilter/nf_queue.c | 23 ++++++--
net/netfilter/nfnetlink_queue.c | 12 +++--
net/smc/smc_core.c | 5 +-
net/wireless/nl80211.c | 12 +++++
net/xfrm/xfrm_device.c | 6 ++-
sound/soc/soc-ops.c | 4 +-
sound/x86/intel_hdmi_audio.c | 2 +-
38 files changed, 250 insertions(+), 103 deletions(-)
From: Marek Vasut <[email protected]>
commit 9bdd10d57a8807dba0003af0325191f3cec0f11c upstream.
While the $val/$val2 values passed in from userspace are always >= 0
integers, the limits of the control can be signed integers and the $min
can be non-zero and less than zero. To correctly validate $val/$val2
against platform_max, add the $min offset to val first.
Fixes: 817f7c9335ec0 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-ops.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -328,7 +328,7 @@ int snd_soc_put_volsw(struct snd_kcontro
mask = BIT(sign_bit + 1) - 1;
val = ucontrol->value.integer.value[0];
- if (mc->platform_max && val > mc->platform_max)
+ if (mc->platform_max && ((int)val + min) > mc->platform_max)
return -EINVAL;
if (val > max - min)
return -EINVAL;
@@ -341,7 +341,7 @@ int snd_soc_put_volsw(struct snd_kcontro
val = val << shift;
if (snd_soc_volsw_is_stereo(mc)) {
val2 = ucontrol->value.integer.value[1];
- if (mc->platform_max && val2 > mc->platform_max)
+ if (mc->platform_max && ((int)val2 + min) > mc->platform_max)
return -EINVAL;
if (val2 > max - min)
return -EINVAL;
From: D. Wythe <[email protected]>
commit 0537f0a2151375dcf90c1bbfda6a0aaf57164e89 upstream.
The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client
dues to following execution sequence:
Server Conn A: Server Conn B: Client Conn B:
smc_lgr_unregister_conn
smc_lgr_register_conn
smc_clc_send_accept ->
smc_rtoken_add
smcr_buf_unuse
-> Client Conn A:
smc_rtoken_delete
smc_lgr_unregister_conn() makes current link available to assigned to new
incoming connection, while smcr_buf_unuse() has not executed yet, which
means that smc_rtoken_add may fail because of insufficient rtoken_entry,
reversing their execution order will avoid this problem.
Fixes: 3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: D. Wythe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -239,8 +239,8 @@ void smc_conn_free(struct smc_connection
if (!lgr)
return;
smc_cdc_tx_dismiss_slots(conn);
- smc_lgr_unregister_conn(conn);
smc_buf_unuse(conn);
+ smc_lgr_unregister_conn(conn);
}
static void smc_link_clear(struct smc_link *lnk)
From: Hugh Dickins <[email protected]>
commit f2b277c4d1c63a85127e8aa2588e9cc3bd21cb99 upstream.
Wangyong reports: after enabling tmpfs filesystem to support transparent
hugepage with the following command:
echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled
the docker program tries to add F_SEAL_WRITE through the following
command, but it fails unexpectedly with errno EBUSY:
fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1.
That is because memfd_tag_pins() and memfd_wait_for_pins() were never
updated for shmem huge pages: checking page_mapcount() against
page_count() is hopeless on THP subpages - they need to check
total_mapcount() against page_count() on THP heads only.
Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins()
(compared != 1): either can be justified, but given the non-atomic
total_mapcount() calculation, it is better now to be strict. Bear in
mind that total_mapcount() itself scans all of the THP subpages, when
choosing to take an XA_CHECK_SCHED latency break.
Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a
page has been swapped out since memfd_tag_pins(), then its refcount must
have fallen, and so it can safely be untagged.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Reported-by: Zeal Robot <[email protected]>
Reported-by: wangyong <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: CGEL ZTE <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/shmem.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2689,7 +2689,8 @@ static void shmem_tag_pins(struct addres
slot = radix_tree_iter_retry(&iter);
continue;
}
- } else if (page_count(page) - page_mapcount(page) > 1) {
+ } else if (!PageTail(page) && page_count(page) !=
+ hpage_nr_pages(page) + total_mapcount(page)) {
radix_tree_tag_set(&mapping->page_tree, iter.index,
SHMEM_TAG_PINNED);
}
@@ -2749,8 +2750,8 @@ static int shmem_wait_for_pins(struct ad
page = NULL;
}
- if (page &&
- page_count(page) - page_mapcount(page) != 1) {
+ if (page && page_count(page) !=
+ hpage_nr_pages(page) + total_mapcount(page)) {
if (scan < LAST_SCAN)
goto continue_resched;
From: Yongzhi Liu <[email protected]>
[ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/sh/shdma-base.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 12fa48e380cf5..4f8dfe77da3c5 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -118,8 +118,10 @@ static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx)
ret = pm_runtime_get(schan->dev);
spin_unlock_irq(&schan->chan_lock);
- if (ret < 0)
+ if (ret < 0) {
dev_err(schan->dev, "%s(): GET = %d\n", __func__, ret);
+ pm_runtime_put(schan->dev);
+ }
pm_runtime_barrier(schan->dev);
--
2.34.1
From: Eric Anholt <[email protected]>
[ Upstream commit 9495b9b31abe525ebd93da58de2c88b9f66d3a0e ]
The CLKT register contains at poweron 0x40, which at our typical 100kHz
bus rate means .64ms. But there is no specified limit to how long devices
should be able to stretch the clocks, so just disable the timeout. We
still have a timeout wrapping the entire transfer.
Signed-off-by: Eric Anholt <[email protected]>
Signed-off-by: Stefan Wahren <[email protected]>
BugLink: https://github.com/raspberrypi/linux/issues/3064
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/i2c-bcm2835.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 4d19254f78c8a..db1ab9ccc30e7 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -28,6 +28,11 @@
#define BCM2835_I2C_FIFO 0x10
#define BCM2835_I2C_DIV 0x14
#define BCM2835_I2C_DEL 0x18
+/*
+ * 16-bit field for the number of SCL cycles to wait after rising SCL
+ * before deciding the slave is not responding. 0 disables the
+ * timeout detection.
+ */
#define BCM2835_I2C_CLKT 0x1c
#define BCM2835_I2C_C_READ BIT(0)
@@ -398,6 +403,12 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
adap->dev.of_node = pdev->dev.of_node;
adap->quirks = &bcm2835_i2c_quirks;
+ /*
+ * Disable the hardware clock stretching timeout. SMBUS
+ * specifies a limit for how long the device can stretch the
+ * clock, but core I2C doesn't.
+ */
+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_CLKT, 0);
bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
ret = i2c_add_adapter(adap);
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40 ]
Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit
and the BTN_LEFT key bit.
As explained in the specification, where a device has a button type
value of 0 (click-pad) or 1 (pressure-pad) there should not be
discrete buttons:
https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report
However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even
though the device is a buttonpad and therefore does not have those
buttons.
This behavior has forced userspace applications like libinput to
implement different workarounds and quirks to detect buttonpads and
offer to the user the right set of features and configuration options.
For more information:
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726
In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key
bits when the input device is register if the INPUT_PROP_BUTTONPAD
property bit is set.
Notice that this change will not affect udev because it does not check
for buttons. See systemd/src/udev/udev-builtin-input_id.c.
List of known affected hardware:
- Chuwi AeroBook Plus
- Chuwi Gemibook
- Framework Laptop
- GPD Win Max
- Huawei MateBook 2020
- Prestigio Smartbook 141 C2
- Purism Librem 14v1
- StarLite Mk II - AMI firmware
- StarLite Mk II - Coreboot firmware
- StarLite Mk III - AMI firmware
- StarLite Mk III - Coreboot firmware
- StarLabTop Mk IV - AMI firmware
- StarLabTop Mk IV - Coreboot firmware
- StarBook Mk V
Acked-by: Peter Hutterer <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: José Expósito <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/input.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/input/input.c b/drivers/input/input.c
index cadb368be8eff..cb8ff919ba82b 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -2120,6 +2120,12 @@ int input_register_device(struct input_dev *dev)
/* KEY_RESERVED is not supposed to be transmitted to userspace. */
__clear_bit(KEY_RESERVED, dev->keybit);
+ /* Buttonpads should not map BTN_RIGHT and/or BTN_MIDDLE. */
+ if (test_bit(INPUT_PROP_BUTTONPAD, dev->propbit)) {
+ __clear_bit(BTN_RIGHT, dev->keybit);
+ __clear_bit(BTN_MIDDLE, dev->keybit);
+ }
+
/* Make sure that bitmasks not mentioned in dev->evbit are clean. */
input_cleanse_bitmasks(dev);
--
2.34.1
From: Eric Dumazet <[email protected]>
commit 56763f12b0f02706576a088e85ef856deacc98a0 upstream.
We must not dereference @new_hooks after nf_hook_mutex has been released,
because other threads might have freed our allocated hooks already.
BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline]
BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430
CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
hooks_validate net/netfilter/core.c:171 [inline]
__nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024
rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084
__sys_setsockopt+0x2db/0x610 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f65a1ace7d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130
R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000
</TASK>
The buggy address belongs to the page:
page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993
prep_new_page mm/page_alloc.c:2434 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
__alloc_pages_node include/linux/gfp.h:572 [inline]
alloc_pages_node include/linux/gfp.h:595 [inline]
kmalloc_large_node+0x62/0x130 mm/slub.c:4438
__kmalloc_node+0x35a/0x4a0 mm/slub.c:4454
kmalloc_node include/linux/slab.h:604 [inline]
kvmalloc_node+0x97/0x100 mm/util.c:580
kvmalloc include/linux/slab.h:731 [inline]
kvzalloc include/linux/slab.h:739 [inline]
allocate_hook_entries_size net/netfilter/core.c:61 [inline]
nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128
__nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429
nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1352 [inline]
free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
free_unref_page_prepare mm/page_alloc.c:3325 [inline]
free_unref_page+0x19/0x690 mm/page_alloc.c:3404
kvfree+0x42/0x50 mm/util.c:613
rcu_do_batch kernel/rcu/tree.c:2527 [inline]
rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
Memory state around the buggy address:
ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 2420b79f8c18 ("netfilter: debug: check for sorted array")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -276,14 +276,15 @@ int nf_register_net_hook(struct net *net
p = nf_entry_dereference(*pp);
new_hooks = nf_hook_entries_grow(p, reg);
- if (!IS_ERR(new_hooks))
+ if (!IS_ERR(new_hooks)) {
+ hooks_validate(new_hooks);
rcu_assign_pointer(*pp, new_hooks);
+ }
mutex_unlock(&nf_hook_mutex);
if (IS_ERR(new_hooks))
return PTR_ERR(new_hooks);
- hooks_validate(new_hooks);
#ifdef CONFIG_NETFILTER_INGRESS
if (reg->pf == NFPROTO_NETDEV && reg->hooknum == NF_NETDEV_INGRESS)
net_inc_ingress_queue();
From: Zhen Ni <[email protected]>
commit 0aa6b294b312d9710804679abd2c0c8ca52cc2bc upstream.
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Signed-off-by: Zhen Ni <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/x86/intel_hdmi_audio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -1308,7 +1308,7 @@ static int had_pcm_mmap(struct snd_pcm_s
{
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
return remap_pfn_range(vma, vma->vm_start,
- substream->dma_buffer.addr >> PAGE_SHIFT,
+ substream->runtime->dma_addr >> PAGE_SHIFT,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
From: Jann Horn <[email protected]>
commit 258dd902022cb10c83671176688074879517fd21 upstream.
When the "block" flag is false, the old code would sometimes still call
check_var_size(), which wrongly tells ->query_variable_store() that it can
block.
As far as I can tell, this can't really materialize as a bug at the moment,
because ->query_variable_store only does something on X86 with generic EFI,
and in that configuration we always take the efivar_entry_set_nonblocking()
path.
Fixes: ca0e30dcaa53 ("efi: Add nonblocking option to efi_query_variable_store()")
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/vars.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -763,6 +763,7 @@ int efivar_entry_set_safe(efi_char16_t *
{
const struct efivar_operations *ops;
efi_status_t status;
+ unsigned long varsize;
if (!__efivars)
return -EINVAL;
@@ -785,15 +786,17 @@ int efivar_entry_set_safe(efi_char16_t *
return efivar_entry_set_nonblocking(name, vendor, attributes,
size, data);
+ varsize = size + ucs2_strsize(name, 1024);
if (!block) {
if (down_trylock(&efivars_lock))
return -EBUSY;
+ status = check_var_size_nonblocking(attributes, varsize);
} else {
if (down_interruptible(&efivars_lock))
return -EINTR;
+ status = check_var_size(attributes, varsize);
}
- status = check_var_size(attributes, size + ucs2_strsize(name, 1024));
if (status != EFI_SUCCESS) {
up(&efivars_lock);
return -ENOSPC;
From: Jiasheng Jiang <[email protected]>
[ Upstream commit a222fd8541394b36b13c89d1698d9530afd59a9c ]
As the possible failure of the ioremap(), the par_io could be NULL.
Therefore it should be better to check it and return error in order to
guarantee the success of the initiation.
But, I also notice that all the caller like mpc85xx_qe_par_io_init() in
`arch/powerpc/platforms/85xx/common.c` don't check the return value of
the par_io_init().
Actually, par_io_init() needs to check to handle the potential error.
I will submit another patch to fix that.
Anyway, par_io_init() itsely should be fixed.
Fixes: 7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/fsl/qe/qe_io.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
index 7ae59abc7863..127a4a836e67 100644
--- a/drivers/soc/fsl/qe/qe_io.c
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -41,6 +41,8 @@ int par_io_init(struct device_node *np)
if (ret)
return ret;
par_io = ioremap(res.start, resource_size(&res));
+ if (!par_io)
+ return -ENOMEM;
num_ports = of_get_property(np, "num-ports", NULL);
if (num_ports)
--
2.34.1
From: Daniele Palmas <[email protected]>
[ Upstream commit 21e8a96377e6b6debae42164605bf9dcbe5720c5 ]
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/cdc_mbim.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index cdd1b193fd4fe..41bac861ca99d 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -660,6 +660,11 @@ static const struct usb_device_id mbim_devs[] = {
.driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
},
+ /* Telit FN990 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1071, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+ },
+
/* default entry */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_zlp,
--
2.34.1
From: Hans de Goede <[email protected]>
commit 04b7762e37c95d9b965d16bb0e18dbd1fa2e2861 upstream.
Before these changes elan_suspend() would only disable the regulator
when device_may_wakeup() returns false; whereas elan_resume() would
unconditionally enable it, leading to an enable count imbalance when
device_may_wakeup() returns true.
This triggers the "WARN_ON(regulator->enable_count)" in regulator_put()
when the elan_i2c driver gets unbound, this happens e.g. with the
hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1.
Fix this by making the regulator_enable() call also be conditional
on device_may_wakeup() returning false.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1195,17 +1195,17 @@ static int __maybe_unused elan_resume(st
struct elan_tp_data *data = i2c_get_clientdata(client);
int error;
- if (device_may_wakeup(dev) && data->irq_wake) {
+ if (!device_may_wakeup(dev)) {
+ error = regulator_enable(data->vcc);
+ if (error) {
+ dev_err(dev, "error %d enabling regulator\n", error);
+ goto err;
+ }
+ } else if (data->irq_wake) {
disable_irq_wake(client->irq);
data->irq_wake = false;
}
- error = regulator_enable(data->vcc);
- if (error) {
- dev_err(dev, "error %d enabling regulator\n", error);
- goto err;
- }
-
error = elan_set_power(data, true);
if (error) {
dev_err(dev, "power up when resuming failed: %d\n", error);
From: Hans de Goede <[email protected]>
commit 81a36d8ce554b82b0a08e2b95d0bd44fcbff339b upstream.
elan_disable_power() is called conditionally on suspend, where as
elan_enable_power() is always called on resume. This leads to
an imbalance in the regulator's enable count.
Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power()
in preparation of fixing this.
No functional changes intended.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[dtor: consolidate elan_[en|dis]able() into elan_set_power()]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 62 ++++++++++++------------------------
1 file changed, 22 insertions(+), 40 deletions(-)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -137,55 +137,21 @@ static int elan_get_fwinfo(u16 ic_type,
return 0;
}
-static int elan_enable_power(struct elan_tp_data *data)
+static int elan_set_power(struct elan_tp_data *data, bool on)
{
int repeat = ETP_RETRY_COUNT;
int error;
- error = regulator_enable(data->vcc);
- if (error) {
- dev_err(&data->client->dev,
- "failed to enable regulator: %d\n", error);
- return error;
- }
-
do {
- error = data->ops->power_control(data->client, true);
+ error = data->ops->power_control(data->client, on);
if (error >= 0)
return 0;
msleep(30);
} while (--repeat > 0);
- dev_err(&data->client->dev, "failed to enable power: %d\n", error);
- return error;
-}
-
-static int elan_disable_power(struct elan_tp_data *data)
-{
- int repeat = ETP_RETRY_COUNT;
- int error;
-
- do {
- error = data->ops->power_control(data->client, false);
- if (!error) {
- error = regulator_disable(data->vcc);
- if (error) {
- dev_err(&data->client->dev,
- "failed to disable regulator: %d\n",
- error);
- /* Attempt to power the chip back up */
- data->ops->power_control(data->client, true);
- break;
- }
-
- return 0;
- }
-
- msleep(30);
- } while (--repeat > 0);
-
- dev_err(&data->client->dev, "failed to disable power: %d\n", error);
+ dev_err(&data->client->dev, "failed to set power %s: %d\n",
+ on ? "on" : "off", error);
return error;
}
@@ -1206,9 +1172,19 @@ static int __maybe_unused elan_suspend(s
/* Enable wake from IRQ */
data->irq_wake = (enable_irq_wake(client->irq) == 0);
} else {
- ret = elan_disable_power(data);
+ ret = elan_set_power(data, false);
+ if (ret)
+ goto err;
+
+ ret = regulator_disable(data->vcc);
+ if (ret) {
+ dev_err(dev, "error %d disabling regulator\n", ret);
+ /* Attempt to power the chip back up */
+ elan_set_power(data, true);
+ }
}
+err:
mutex_unlock(&data->sysfs_mutex);
return ret;
}
@@ -1224,7 +1200,13 @@ static int __maybe_unused elan_resume(st
data->irq_wake = false;
}
- error = elan_enable_power(data);
+ error = regulator_enable(data->vcc);
+ if (error) {
+ dev_err(dev, "error %d enabling regulator\n", error);
+ goto err;
+ }
+
+ error = elan_set_power(data, true);
if (error) {
dev_err(dev, "power up when resuming failed: %d\n", error);
goto err;
From: Vladimir Oltean <[email protected]>
commit 10b6bb62ae1a49ee818fc479cf57b8900176773e upstream.
Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.
One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
-> dcb_ieee_setapp
If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().
Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.
Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dcb/dcbnl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -1943,7 +1943,7 @@ static void dcbnl_flush_dev(struct net_d
{
struct dcb_app_type *itr, *tmp;
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
list_for_each_entry_safe(itr, tmp, &dcb_app_list, list) {
if (itr->ifindex == dev->ifindex) {
@@ -1952,7 +1952,7 @@ static void dcbnl_flush_dev(struct net_d
}
}
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
}
static int dcbnl_netdevice_event(struct notifier_block *nb,
From: Hangyu Hua <[email protected]>
commit 501e38a5531efbd77d5c73c0ba838a889bfc1d74 upstream.
dev->config and dev->hs_config and dev->dev need to be cleaned if
dev_config fails to avoid UAF.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Hangyu Hua <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/legacy/inode.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1882,8 +1882,8 @@ dev_config (struct file *fd, const char
value = usb_gadget_probe_driver(&gadgetfs_driver);
if (value != 0) {
- kfree (dev->buf);
- dev->buf = NULL;
+ spin_lock_irq(&dev->lock);
+ goto fail;
} else {
/* at this point "good" hardware has for the first time
* let the USB the host see us. alternatively, if users
@@ -1900,6 +1900,9 @@ dev_config (struct file *fd, const char
return value;
fail:
+ dev->config = NULL;
+ dev->hs_config = NULL;
+ dev->dev = NULL;
spin_unlock_irq (&dev->lock);
pr_debug ("%s: %s fail %zd, %p\n", shortname, __func__, value, dev);
kfree (dev->buf);
From: Leon Romanovsky <[email protected]>
commit 7c76ecd9c99b6e9a771d813ab1aa7fa428b3ade1 upstream.
struct xfrm_user_offload has flags variable that received user input,
but kernel didn't check if valid bits were provided. It caused a situation
where not sanitized input was forwarded directly to the drivers.
For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by
strongswan, but not implemented in the kernel at all.
As a solution, check and sanitize input flags to forward
XFRM_OFFLOAD_INBOUND to the drivers.
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/xfrm.h | 6 ++++++
net/xfrm/xfrm_device.c | 6 +++++-
2 files changed, 11 insertions(+), 1 deletion(-)
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -501,6 +501,12 @@ struct xfrm_user_offload {
int ifindex;
__u8 flags;
};
+/* This flag was exposed without any kernel code that supporting it.
+ * Unfortunately, strongswan has the code that uses sets this flag,
+ * which makes impossible to reuse this bit.
+ *
+ * So leave it here to make sure that it won't be reused by mistake.
+ */
#define XFRM_OFFLOAD_IPV6 1
#define XFRM_OFFLOAD_INBOUND 2
--- a/net/xfrm/xfrm_device.c
+++ b/net/xfrm/xfrm_device.c
@@ -69,6 +69,9 @@ int xfrm_dev_state_add(struct net *net,
if (x->encap || x->tfcpad || (x->props.flags & XFRM_STATE_ESN))
return 0;
+ if (xuo->flags & ~(XFRM_OFFLOAD_IPV6 | XFRM_OFFLOAD_INBOUND))
+ return -EINVAL;
+
dev = dev_get_by_index(net, xuo->ifindex);
if (!dev) {
if (!(xuo->flags & XFRM_OFFLOAD_INBOUND)) {
@@ -98,7 +101,8 @@ int xfrm_dev_state_add(struct net *net,
xso->dev = dev;
xso->num_exthdrs = 1;
- xso->flags = xuo->flags;
+ /* Don't forward bit that is not implemented */
+ xso->flags = xuo->flags & ~XFRM_OFFLOAD_IPV6;
err = dev->xfrmdev_ops->xdo_dev_state_add(x);
if (err) {
From: Jiri Bohac <[email protected]>
commit 6596a0229541270fb8d38d989f91b78838e5e9da upstream.
Commit 749439bfac6e1a2932c582e2699f91d329658196 ("ipv6: fix udpv6
sendmsg crash caused by too small MTU") breaks PMTU for xfrm.
A Packet Too Big ICMPv6 message received in response to an ESP
packet will prevent all further communication through the tunnel
if the reported MTU minus the ESP overhead is smaller than 1280.
E.g. in a case of a tunnel-mode ESP with sha256/aes the overhead
is 92 bytes. Receiving a PTB with MTU of 1371 or less will result
in all further packets in the tunnel dropped. A ping through the
tunnel fails with "ping: sendmsg: Invalid argument".
Apparently the MTU on the xfrm route is smaller than 1280 and
fails the check inside ip6_setup_cork() added by 749439bf.
We found this by debugging USGv6/ipv6ready failures. Failing
tests are: "Phase-2 Interoperability Test Scenario IPsec" /
5.3.11 and 5.4.11 (Tunnel Mode: Fragmentation).
Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm:
xfrm_state_mtu should return at least 1280 for ipv6") attempted
to fix this but caused another regression in TCP MSS calculations
and had to be reverted.
The patch below fixes the situation by dropping the MTU
check and instead checking for the underflows described in the
749439bf commit message.
Signed-off-by: Jiri Bohac <[email protected]>
Fixes: 749439bfac6e ("ipv6: fix udpv6 sendmsg crash caused by too small MTU")
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_output.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1266,8 +1266,6 @@ static int ip6_setup_cork(struct sock *s
if (np->frag_size)
mtu = np->frag_size;
}
- if (mtu < IPV6_MIN_MTU)
- return -EINVAL;
cork->base.fragsize = mtu;
if (dst_allfrag(rt->dst.path))
cork->base.flags |= IPCORK_ALLFRAG;
@@ -1316,8 +1314,6 @@ static int __ip6_append_data(struct sock
fragheaderlen = sizeof(struct ipv6hdr) + rt->rt6i_nfheader_len +
(opt ? opt->opt_nflen : 0);
- maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen -
- sizeof(struct frag_hdr);
headersize = sizeof(struct ipv6hdr) +
(opt ? opt->opt_flen + opt->opt_nflen : 0) +
@@ -1325,6 +1321,13 @@ static int __ip6_append_data(struct sock
sizeof(struct frag_hdr) : 0) +
rt->rt6i_nfheader_len;
+ if (mtu < fragheaderlen ||
+ ((mtu - fragheaderlen) & ~7) + fragheaderlen < sizeof(struct frag_hdr))
+ goto emsgsize;
+
+ maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen -
+ sizeof(struct frag_hdr);
+
/* as per RFC 7112 section 5, the entire IPv6 Header Chain must fit
* the first fragment
*/
From: D. Wythe <[email protected]>
commit 4940a1fdf31c39f0806ac831cde333134862030b upstream.
The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear.
Based on the fact that whether a new SMC connection can be accepted or
not depends on not only the limit of conn nums, but also the available
entries of rtoken. Since the rtoken release is trigger by peer, while
the conn nums is decrease by local, tons of thing can happen in this
time difference.
This only thing that needs to be mentioned is that now all connection
creations are completely protected by smc_server_lgr_pending lock, it's
enough to check only the available entries in rtokens_used_mask.
Fixes: cd6851f30386 ("smc: remote memory buffers (RMBs)")
Signed-off-by: D. Wythe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -428,7 +428,8 @@ int smc_conn_create(struct smc_sock *smc
(lgr->role == role) &&
(lgr->vlan_id == vlan_id) &&
((role == SMC_CLNT) ||
- (lgr->conns_num < SMC_RMBS_PER_LGR_MAX))) {
+ (lgr->conns_num < SMC_RMBS_PER_LGR_MAX &&
+ !bitmap_full(lgr->rtokens_used_mask, SMC_RMBS_PER_LGR_MAX)))) {
/* link group found */
local_contact = SMC_REUSE_CONTACT;
conn->lgr = lgr;
From: Qiushi Wu <[email protected]>
commit fe3c60684377d5ad9b0569b87ed3e26e12c8173b upstream.
kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.
Callback function fw_cfg_sysfs_release_entry() in kobject_put()
can handle the pointer "entry" properly.
Signed-off-by: Qiushi Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Michael S. Tsirkin <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/qemu_fw_cfg.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/firmware/qemu_fw_cfg.c
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -461,8 +461,10 @@ static int fw_cfg_register_file(const st
/* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */
err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype,
fw_cfg_sel_ko, "%d", entry->f.select);
- if (err)
- goto err_register;
+ if (err) {
+ kobject_put(&entry->kobj);
+ return err;
+ }
/* add raw binary content access */
err = sysfs_create_bin_file(&entry->kobj, &fw_cfg_sysfs_attr_raw);
@@ -478,7 +480,6 @@ static int fw_cfg_register_file(const st
err_add_raw:
kobject_del(&entry->kobj);
-err_register:
kfree(entry);
return err;
}
From: William Mahon <[email protected]>
commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream.
This patch adds a new key definition for KEY_ALL_APPLICATIONS
and aliases KEY_DASHBOARD to it.
It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS.
Signed-off-by: William Mahon <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-debug.c | 4 +++-
drivers/hid/hid-input.c | 2 ++
include/uapi/linux/input-event-codes.h | 3 ++-
3 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -835,7 +835,9 @@ static const char *keys[KEY_MAX + 1] = {
[KEY_F22] = "F22", [KEY_F23] = "F23",
[KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD",
[KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3",
- [KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend",
+ [KEY_PROG4] = "Prog4",
+ [KEY_ALL_APPLICATIONS] = "AllApplications",
+ [KEY_SUSPEND] = "Suspend",
[KEY_CLOSE] = "Close", [KEY_PLAY] = "Play",
[KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost",
[KEY_PRINT] = "Print", [KEY_HP] = "HP",
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1026,6 +1026,8 @@ static void hidinput_configure_usage(str
case 0x28b: map_key_clear(KEY_FORWARDMAIL); break;
case 0x28c: map_key_clear(KEY_SEND); break;
+ case 0x2a2: map_key_clear(KEY_ALL_APPLICATIONS); break;
+
case 0x2c7: map_key_clear(KEY_KBDINPUTASSIST_PREV); break;
case 0x2c8: map_key_clear(KEY_KBDINPUTASSIST_NEXT); break;
case 0x2c9: map_key_clear(KEY_KBDINPUTASSIST_PREVGROUP); break;
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -278,7 +278,8 @@
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_ALL_APPLICATIONS 204 /* AC Desktop Show All Applications */
+#define KEY_DASHBOARD KEY_ALL_APPLICATIONS
#define KEY_SUSPEND 205
#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
From: Sven Eckelmann <[email protected]>
commit 690bb6fb64f5dc7437317153902573ecad67593d upstream.
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_is_on_batman_iface. And since some of the
.ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/hard-interface.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -155,22 +155,23 @@ static bool batadv_is_on_batman_iface(co
struct net *net = dev_net(net_dev);
struct net_device *parent_dev;
struct net *parent_net;
+ int iflink;
bool ret;
/* check if this is a batman-adv mesh interface */
if (batadv_softif_is_valid(net_dev))
return true;
+ iflink = dev_get_iflink(net_dev);
+
/* no more parents..stop recursion */
- if (dev_get_iflink(net_dev) == 0 ||
- dev_get_iflink(net_dev) == net_dev->ifindex)
+ if (iflink == 0 || iflink == net_dev->ifindex)
return false;
parent_net = batadv_getlink_net(net_dev, net);
/* recurse over the parent device */
- parent_dev = __dev_get_by_index((struct net *)parent_net,
- dev_get_iflink(net_dev));
+ parent_dev = __dev_get_by_index((struct net *)parent_net, iflink);
/* if we got a NULL parent_dev there is something broken.. */
if (!parent_dev) {
pr_err("Cannot find parent device\n");
From: Vincent Mailhol <[email protected]>
commit 035b0fcf02707d3c9c2890dc1484b11aa5335eb1 upstream.
The driver uses an atomic_t variable: gs_usb:active_channels to keep
track of the number of opened channels in order to only allocate
memory for the URBs when this count changes from zero to one.
However, the driver does not decrement the counter when an error
occurs in gs_can_open(). This issue is fixed by changing the type from
atomic_t to u8 and by simplifying the logic accordingly.
It is safe to use an u8 here because the network stack big kernel lock
(a.k.a. rtnl_mutex) is being hold. For details, please refer to [1].
[1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Vincent Mailhol <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/gs_usb.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -198,8 +198,8 @@ struct gs_can {
struct gs_usb {
struct gs_can *canch[GS_MAX_INTF];
struct usb_anchor rx_submitted;
- atomic_t active_channels;
struct usb_device *udev;
+ u8 active_channels;
};
/* 'allocate' a tx context.
@@ -596,7 +596,7 @@ static int gs_can_open(struct net_device
if (rc)
return rc;
- if (atomic_add_return(1, &parent->active_channels) == 1) {
+ if (!parent->active_channels) {
for (i = 0; i < GS_MAX_RX_URBS; i++) {
struct urb *urb;
u8 *buf;
@@ -697,6 +697,7 @@ static int gs_can_open(struct net_device
dev->can.state = CAN_STATE_ERROR_ACTIVE;
+ parent->active_channels++;
if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
netif_start_queue(netdev);
@@ -712,7 +713,8 @@ static int gs_can_close(struct net_devic
netif_stop_queue(netdev);
/* Stop polling */
- if (atomic_dec_and_test(&parent->active_channels))
+ parent->active_channels--;
+ if (!parent->active_channels)
usb_kill_anchored_urbs(&parent->rx_submitted);
/* Stop sending URBs */
@@ -991,8 +993,6 @@ static int gs_usb_probe(struct usb_inter
init_usb_anchor(&dev->rx_submitted);
- atomic_set(&dev->active_channels, 0);
-
usb_set_intfdata(intf, dev);
dev->udev = interface_to_usbdev(intf);
From: Florian Westphal <[email protected]>
commit c3873070247d9e3c7a6b0cf9bf9b45e8018427b1 upstream.
Eric Dumazet says:
The sock_hold() side seems suspect, because there is no guarantee
that sk_refcnt is not already 0.
On failure, we cannot queue the packet and need to indicate an
error. The packet will be dropped by the caller.
v2: split skb prefetch hunk into separate change
Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/netfilter/nf_queue.h | 2 +-
net/netfilter/nf_queue.c | 12 ++++++++++--
net/netfilter/nfnetlink_queue.c | 12 +++++++++---
3 files changed, 20 insertions(+), 6 deletions(-)
--- a/include/net/netfilter/nf_queue.h
+++ b/include/net/netfilter/nf_queue.h
@@ -32,7 +32,7 @@ void nf_register_queue_handler(struct ne
void nf_unregister_queue_handler(struct net *net);
void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
-void nf_queue_entry_get_refs(struct nf_queue_entry *entry);
+bool nf_queue_entry_get_refs(struct nf_queue_entry *entry);
void nf_queue_entry_release_refs(struct nf_queue_entry *entry);
static inline void init_hashrandom(u32 *jhash_initval)
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -80,10 +80,13 @@ void nf_queue_entry_release_refs(struct
EXPORT_SYMBOL_GPL(nf_queue_entry_release_refs);
/* Bump dev refs so they don't vanish while packet is out */
-void nf_queue_entry_get_refs(struct nf_queue_entry *entry)
+bool nf_queue_entry_get_refs(struct nf_queue_entry *entry)
{
struct nf_hook_state *state = &entry->state;
+ if (state->sk && !refcount_inc_not_zero(&state->sk->sk_refcnt))
+ return false;
+
if (state->in)
dev_hold(state->in);
if (state->out)
@@ -102,6 +105,7 @@ void nf_queue_entry_get_refs(struct nf_q
dev_hold(physdev);
}
#endif
+ return true;
}
EXPORT_SYMBOL_GPL(nf_queue_entry_get_refs);
@@ -159,7 +163,11 @@ static int __nf_queue(struct sk_buff *sk
.size = sizeof(*entry) + afinfo->route_key_size,
};
- nf_queue_entry_get_refs(entry);
+ if (!nf_queue_entry_get_refs(entry)) {
+ kfree(entry);
+ return -ENOTCONN;
+ }
+
afinfo->saveroute(skb, entry);
status = qh->outfn(entry, queuenum);
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -693,9 +693,15 @@ static struct nf_queue_entry *
nf_queue_entry_dup(struct nf_queue_entry *e)
{
struct nf_queue_entry *entry = kmemdup(e, e->size, GFP_ATOMIC);
- if (entry)
- nf_queue_entry_get_refs(entry);
- return entry;
+
+ if (!entry)
+ return NULL;
+
+ if (nf_queue_entry_get_refs(entry))
+ return entry;
+
+ kfree(entry);
+ return NULL;
}
#if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
From: Ronnie Sahlberg <[email protected]>
[ Upstream commit 3d6cc9898efdfb062efb74dc18cfc700e082f5d5 ]
When cifs_get_root() fails during cifs_smb3_do_mount() we call
deactivate_locked_super() which eventually will call delayed_free() which
will free the context.
In this situation we should not proceed to enter the out: section in
cifs_smb3_do_mount() and free the same resources a second time.
[Thu Feb 10 12:59:06 2022] BUG: KASAN: use-after-free in rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] Read of size 8 at addr ffff888364f4d110 by task swapper/1/0
[Thu Feb 10 12:59:06 2022] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G OE 5.17.0-rc3+ #4
[Thu Feb 10 12:59:06 2022] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.0 12/17/2019
[Thu Feb 10 12:59:06 2022] Call Trace:
[Thu Feb 10 12:59:06 2022] <IRQ>
[Thu Feb 10 12:59:06 2022] dump_stack_lvl+0x5d/0x78
[Thu Feb 10 12:59:06 2022] print_address_description.constprop.0+0x24/0x150
[Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] kasan_report.cold+0x7d/0x117
[Thu Feb 10 12:59:06 2022] ? rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] __asan_load8+0x86/0xa0
[Thu Feb 10 12:59:06 2022] rcu_cblist_dequeue+0x32/0x60
[Thu Feb 10 12:59:06 2022] rcu_core+0x547/0xca0
[Thu Feb 10 12:59:06 2022] ? call_rcu+0x3c0/0x3c0
[Thu Feb 10 12:59:06 2022] ? __this_cpu_preempt_check+0x13/0x20
[Thu Feb 10 12:59:06 2022] ? lock_is_held_type+0xea/0x140
[Thu Feb 10 12:59:06 2022] rcu_core_si+0xe/0x10
[Thu Feb 10 12:59:06 2022] __do_softirq+0x1d4/0x67b
[Thu Feb 10 12:59:06 2022] __irq_exit_rcu+0x100/0x150
[Thu Feb 10 12:59:06 2022] irq_exit_rcu+0xe/0x30
[Thu Feb 10 12:59:06 2022] sysvec_hyperv_stimer0+0x9d/0xc0
...
[Thu Feb 10 12:59:07 2022] Freed by task 58179:
[Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50
[Thu Feb 10 12:59:07 2022] kasan_set_track+0x25/0x30
[Thu Feb 10 12:59:07 2022] kasan_set_free_info+0x24/0x40
[Thu Feb 10 12:59:07 2022] ____kasan_slab_free+0x137/0x170
[Thu Feb 10 12:59:07 2022] __kasan_slab_free+0x12/0x20
[Thu Feb 10 12:59:07 2022] slab_free_freelist_hook+0xb3/0x1d0
[Thu Feb 10 12:59:07 2022] kfree+0xcd/0x520
[Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0x149/0xbe0 [cifs]
[Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs]
[Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140
[Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0
[Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210
[Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0
[Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae
[Thu Feb 10 12:59:07 2022] Last potentially related work creation:
[Thu Feb 10 12:59:07 2022] kasan_save_stack+0x26/0x50
[Thu Feb 10 12:59:07 2022] __kasan_record_aux_stack+0xb6/0xc0
[Thu Feb 10 12:59:07 2022] kasan_record_aux_stack_noalloc+0xb/0x10
[Thu Feb 10 12:59:07 2022] call_rcu+0x76/0x3c0
[Thu Feb 10 12:59:07 2022] cifs_umount+0xce/0xe0 [cifs]
[Thu Feb 10 12:59:07 2022] cifs_kill_sb+0xc8/0xe0 [cifs]
[Thu Feb 10 12:59:07 2022] deactivate_locked_super+0x5d/0xd0
[Thu Feb 10 12:59:07 2022] cifs_smb3_do_mount+0xab9/0xbe0 [cifs]
[Thu Feb 10 12:59:07 2022] smb3_get_tree+0x1a0/0x2e0 [cifs]
[Thu Feb 10 12:59:07 2022] vfs_get_tree+0x52/0x140
[Thu Feb 10 12:59:07 2022] path_mount+0x635/0x10c0
[Thu Feb 10 12:59:07 2022] __x64_sys_mount+0x1bf/0x210
[Thu Feb 10 12:59:07 2022] do_syscall_64+0x5c/0xc0
[Thu Feb 10 12:59:07 2022] entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: Shyam Prasad N <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/cifs/cifsfs.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 74f405a05efc3..dba0d12c3db19 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -753,6 +753,7 @@ cifs_do_mount(struct file_system_type *fs_type,
out_super:
deactivate_locked_super(sb);
+ return root;
out:
cifs_cleanup_volume_info(volume_info);
return root;
--
2.34.1
From: JaeMan Park <[email protected]>
[ Upstream commit cacfddf82baf1470e5741edeecb187260868f195 ]
In mac80211_hwsim, the probe_req frame is created and sent while
scanning. It is sent with ieee80211_tx_info which is not initialized.
Uninitialized ieee80211_tx_info can cause problems when using
mac80211_hwsim with wmediumd. wmediumd checks the tx_rates field of
ieee80211_tx_info and doesn't relay probe_req frame to other clients
even if it is a broadcasting message.
Call ieee80211_tx_prepare_skb() to initialize ieee80211_tx_info for
the probe_req that is created by hw_scan_work in mac80211_hwsim.
Signed-off-by: JaeMan Park <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[fix memory leak]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mac80211_hwsim.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index b19d19c4be272..ee1eb14ae8fc9 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2025,6 +2025,15 @@ static void hw_scan_work(struct work_struct *work)
if (req->ie_len)
skb_put_data(probe, req->ie, req->ie_len);
+ if (!ieee80211_tx_prepare_skb(hwsim->hw,
+ hwsim->hw_scan_vif,
+ probe,
+ hwsim->tmp_chan->band,
+ NULL)) {
+ kfree_skb(probe);
+ continue;
+ }
+
local_bh_disable();
mac80211_hwsim_tx_frame(hwsim->hw, probe,
hwsim->tmp_chan);
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 7b83299e5b9385943a857d59e15cba270df20d7e upstream.
early_param() handlers should return 0 on success.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 would cause the "option=value" string
to be added to init's environment strings, polluting it.
../arch/arm/mm/mmu.c: In function 'test_early_cachepolicy':
../arch/arm/mm/mmu.c:215:1: error: no return statement in function returning non-void [-Werror=return-type]
../arch/arm/mm/mmu.c: In function 'test_noalign_setup':
../arch/arm/mm/mmu.c:221:1: error: no return statement in function returning non-void [-Werror=return-type]
Fixes: b849a60e0903 ("ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Cc: Uwe Kleine-König <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mm/mmu.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -230,12 +230,14 @@ early_param("ecc", early_ecc);
static int __init early_cachepolicy(char *p)
{
pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+ return 0;
}
early_param("cachepolicy", early_cachepolicy);
static int __init noalign_setup(char *__unused)
{
pr_warn("noalign kernel parameter not supported without cp15\n");
+ return 1;
}
__setup("noalign", noalign_setup);
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 767b9825ed1765894e569a3d698749d40d83762a ]
The function pci_find_capability() in t3_prep_adapter() can fail, so its
return value should be checked.
Fixes: 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb3/t3_hw.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index a89721fad633..29220141e4e4 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
@@ -3677,6 +3677,8 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
MAC_STATS_ACCUM_SECS : (MAC_STATS_ACCUM_SECS * 10);
adapter->params.pci.vpd_cap_addr =
pci_find_capability(adapter->pdev, PCI_CAP_ID_VPD);
+ if (!adapter->params.pci.vpd_cap_addr)
+ return -ENODEV;
ret = get_vpd_params(adapter, &adapter->params.vpd);
if (ret < 0)
return ret;
--
2.34.1
From: Wolfram Sang <[email protected]>
[ Upstream commit 0b0dcb3882c8f08bdeafa03adb4487e104d26050 ]
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index c457f65136f83..ab9c7f2f1f79b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -459,7 +459,7 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
config I2C_CADENCE
tristate "Cadence I2C Controller"
- depends on ARCH_ZYNQ || ARM64 || XTENSA
+ depends on ARCH_ZYNQ || ARM64 || XTENSA || COMPILE_TEST
help
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
--
2.34.1
From: Hangyu Hua <[email protected]>
commit 89f3594d0de58e8a57d92d497dea9fee3d4b9cda upstream.
dev->buf does not need to be released if it already exists before
executing dev_config.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Hangyu Hua <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/legacy/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1833,8 +1833,9 @@ dev_config (struct file *fd, const char
spin_lock_irq (&dev->lock);
value = -EINVAL;
if (dev->buf) {
+ spin_unlock_irq(&dev->lock);
kfree(kbuf);
- goto fail;
+ return value;
}
dev->buf = kbuf;
From: Sven Eckelmann <[email protected]>
commit 6116ba09423f7d140f0460be6a1644dceaad00da upstream.
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_get_real_netdevice. And since some of the
ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/hard-interface.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -221,14 +221,16 @@ static struct net_device *batadv_get_rea
struct net_device *real_netdev = NULL;
struct net *real_net;
struct net *net;
- int ifindex;
+ int iflink;
ASSERT_RTNL();
if (!netdev)
return NULL;
- if (netdev->ifindex == dev_get_iflink(netdev)) {
+ iflink = dev_get_iflink(netdev);
+
+ if (netdev->ifindex == iflink) {
dev_hold(netdev);
return netdev;
}
@@ -238,9 +240,8 @@ static struct net_device *batadv_get_rea
goto out;
net = dev_net(hard_iface->soft_iface);
- ifindex = dev_get_iflink(netdev);
real_net = batadv_getlink_net(netdev, net);
- real_netdev = dev_get_by_index(real_net, ifindex);
+ real_netdev = dev_get_by_index(real_net, iflink);
out:
if (hard_iface)
From: Johan Hovold <[email protected]>
commit 47a1db8e797da01a1309bf42e0c0d771d4e4d4f3 upstream.
An initialised kobject must be freed using kobject_put() to avoid
leaking associated resources (e.g. the object name).
Commit fe3c60684377 ("firmware: Fix a reference count leak.") "fixed"
the leak in the first error path of the file registration helper but
left the second one unchanged. This "fix" would however result in a NULL
pointer dereference due to the release function also removing the never
added entry from the fw_cfg_entry_cache list. This has now been
addressed.
Fix the remaining kobject leak by restoring the common error path and
adding the missing kobject_put().
Fixes: 75f3e8e47f38 ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: [email protected] # 4.6
Cc: Gabriel Somlo <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/qemu_fw_cfg.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/drivers/firmware/qemu_fw_cfg.c
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -461,15 +461,13 @@ static int fw_cfg_register_file(const st
/* register entry under "/sys/firmware/qemu_fw_cfg/by_key/" */
err = kobject_init_and_add(&entry->kobj, &fw_cfg_sysfs_entry_ktype,
fw_cfg_sel_ko, "%d", entry->f.select);
- if (err) {
- kobject_put(&entry->kobj);
- return err;
- }
+ if (err)
+ goto err_put_entry;
/* add raw binary content access */
err = sysfs_create_bin_file(&entry->kobj, &fw_cfg_sysfs_attr_raw);
if (err)
- goto err_add_raw;
+ goto err_del_entry;
/* try adding "/sys/firmware/qemu_fw_cfg/by_name/" symlink */
fw_cfg_build_symlink(fw_cfg_fname_kset, &entry->kobj, entry->f.name);
@@ -478,9 +476,10 @@ static int fw_cfg_register_file(const st
fw_cfg_sysfs_cache_enlist(entry);
return 0;
-err_add_raw:
+err_del_entry:
kobject_del(&entry->kobj);
- kfree(entry);
+err_put_entry:
+ kobject_put(&entry->kobj);
return err;
}
From: Nicolas Escande <[email protected]>
commit 859ae7018316daa4adbc496012dcbbb458d7e510 upstream.
There are two problems with the current code that have been highlighted
with the AQL feature that is now enbaled by default.
First problem is in ieee80211_rx_h_mesh_fwding(),
ieee80211_select_queue_80211() is used on received packets to choose
the sending AC queue of the forwarding packet although this function
should only be called on TX packet (it uses ieee80211_tx_info).
This ends with forwarded mesh packets been sent on unrelated random AC
queue. To fix that, AC queue can directly be infered from skb->priority
which has been extracted from QOS info (see ieee80211_parse_qos()).
Second problem is the value of queue_mapping set on forwarded mesh
frames via skb_set_queue_mapping() is not the AC of the packet but a
hardware queue index. This may or may not work depending on AC to HW
queue mapping which is driver specific.
Both of these issues lead to improper AC selection while forwarding
mesh packets but more importantly due to improper airtime accounting
(which is done on a per STA, per AC basis) caused traffic stall with
the introduction of AQL.
Fixes: cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding")
Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping")
Co-developed-by: Remi Pommarel <[email protected]>
Signed-off-by: Remi Pommarel <[email protected]>
Signed-off-by: Nicolas Escande <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/rx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2631,13 +2631,13 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
ether_addr_equal(sdata->vif.addr, hdr->addr3))
return RX_CONTINUE;
- ac = ieee80211_select_queue_80211(sdata, skb, hdr);
+ ac = ieee802_1d_to_ac[skb->priority];
q = sdata->vif.hw_queue[ac];
if (ieee80211_queue_stopped(&local->hw, q)) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion);
return RX_DROP_MONITOR;
}
- skb_set_queue_mapping(skb, q);
+ skb_set_queue_mapping(skb, ac);
if (!--mesh_hdr->ttl) {
if (!is_multicast_ether_addr(hdr->addr1))
From: Randy Dunlap <[email protected]>
commit 50e06ddceeea263f57fe92baa677c638ecd65bb6 upstream.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.
Fixes: acc18c147b22 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe")
Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Siva Reddy <[email protected]>
Cc: Girish K S <[email protected]>
Cc: Byungho An <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -2282,18 +2282,18 @@ static int __init sxgbe_cmdline_opt(char
char *opt;
if (!str || !*str)
- return -EINVAL;
+ return 1;
while ((opt = strsep(&str, ",")) != NULL) {
if (!strncmp(opt, "eee_timer:", 10)) {
if (kstrtoint(opt + 10, 0, &eee_timer))
goto err;
}
}
- return 0;
+ return 1;
err:
pr_err("%s: ERROR broken module parameter conversion\n", __func__);
- return -EINVAL;
+ return 1;
}
__setup("sxgbeeth=", sxgbe_cmdline_opt);
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 6ad27f522cb3b210476daf63ce6ddb6568c0508b ]
As there's potential for failure of the nla_memdup(),
check the return value.
Fixes: a442b761b24b ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index f630fa2e3164..bbc3c876a5d8 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -11257,6 +11257,9 @@ static int handle_nan_filter(struct nlattr *attr_filter,
i = 0;
nla_for_each_nested(attr, attr_filter, rem) {
filter[i].filter = nla_memdup(attr, GFP_KERNEL);
+ if (!filter[i].filter)
+ goto err;
+
filter[i].len = nla_len(attr);
i++;
}
@@ -11269,6 +11272,15 @@ static int handle_nan_filter(struct nlattr *attr_filter,
}
return 0;
+
+err:
+ i = 0;
+ nla_for_each_nested(attr, attr_filter, rem) {
+ kfree(filter[i].filter);
+ i++;
+ }
+ kfree(filter);
+ return -ENOMEM;
}
static int nl80211_nan_add_func(struct sk_buff *skb,
--
2.34.1
From: Florian Westphal <[email protected]>
commit 747670fd9a2d1b7774030dba65ca022ba442ce71 upstream.
There is no guarantee that state->sk refers to a full socket.
If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.
I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_queue.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -44,6 +44,15 @@ void nf_unregister_queue_handler(struct
}
EXPORT_SYMBOL(nf_unregister_queue_handler);
+static void nf_queue_sock_put(struct sock *sk)
+{
+#ifdef CONFIG_INET
+ sock_gen_put(sk);
+#else
+ sock_put(sk);
+#endif
+}
+
void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
{
struct nf_hook_state *state = &entry->state;
@@ -54,7 +63,7 @@ void nf_queue_entry_release_refs(struct
if (state->out)
dev_put(state->out);
if (state->sk)
- sock_put(state->sk);
+ nf_queue_sock_put(state->sk);
#if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
if (entry->skb->nf_bridge) {
struct net_device *physdev;
From: Randy Dunlap <[email protected]>
commit e01b042e580f1fbf4fd8da467442451da00c7a90 upstream.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Fixes: f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -4550,7 +4550,7 @@ static int __init stmmac_cmdline_opt(cha
char *opt;
if (!str || !*str)
- return -EINVAL;
+ return 1;
while ((opt = strsep(&str, ",")) != NULL) {
if (!strncmp(opt, "debug:", 6)) {
if (kstrtoint(opt + 6, 0, &debug))
@@ -4581,11 +4581,11 @@ static int __init stmmac_cmdline_opt(cha
goto err;
}
}
- return 0;
+ return 1;
err:
pr_err("%s: ERROR broken module parameter conversion", __func__);
- return -EINVAL;
+ return 1;
}
__setup("stmmaceth=", stmmac_cmdline_opt);
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 5f6b0f2d037c8864f20ff15311c695f65eb09db5 ]
The f_CNT register (at the PCI config. address 0x78) is 16-bit, not
8-bit! The bug was there from the very start... :-(
Signed-off-by: Sergey Shtylyov <[email protected]>
Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_hpt37x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 821fc1f2324c8..44cc02afaa8bd 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -964,14 +964,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if ((freq >> 12) != 0xABCDE) {
int i;
- u8 sr;
+ u16 sr;
u32 total = 0;
pr_warn("BIOS has not set timing clocks\n");
/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
- pci_read_config_byte(dev, 0x78, &sr);
+ pci_read_config_word(dev, 0x78, &sr);
total += sr & 0x1FF;
udelay(15);
}
--
2.34.1
From: Wolfram Sang <[email protected]>
[ Upstream commit 5de717974005fcad2502281e9f82e139ca91f4bb ]
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index ab9c7f2f1f79b..2619f1dc095aa 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -836,7 +836,7 @@ config I2C_PXA_SLAVE
config I2C_QUP
tristate "Qualcomm QUP based I2C controller"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Qualcomm SoCs.
--
2.34.1
From: Vladimir Oltean <[email protected]>
commit 91b0383fef06f20b847fa9e4f0e3054ead0b1a1b upstream.
If I'm not mistaken (and I don't think I am), the way in which the
dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates
the application table with dynamically allocated struct dcb_app_type
entries that are kept in the module-global dcb_app_list.
However, nobody keeps exact track of these entries, and although
dcb_ieee_delapp() is supposed to remove them, nobody does so when the
interface goes away (example: driver unbinds from device). So the
dcb_app_list will contain lingering entries with an ifindex that no
longer matches any device in dcb_app_lookup().
Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and
flushing the app table entries of interfaces that are now gone.
In fact something like this used to be done as part of the initial
commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(),
essentially at module_exit time. That became dead code after commit
7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged
"tristate config DCB" and "bool config DCBNL" into a single "bool config
DCB", so net/dcb/dcbnl.c could not be built as a module anymore.
Commit 36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular")
recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether,
leaving us with the version we have today.
Since flushing application table entries can and should be done as soon
as the netdevice disappears, fundamentally the commit that is to blame
is the one that introduced the design of this API.
Fixes: 9ab933ab2cc8 ("dcbnl: add appliction tlv handlers")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dcb/dcbnl.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -1939,10 +1939,54 @@ int dcb_ieee_delapp(struct net_device *d
}
EXPORT_SYMBOL(dcb_ieee_delapp);
+static void dcbnl_flush_dev(struct net_device *dev)
+{
+ struct dcb_app_type *itr, *tmp;
+
+ spin_lock(&dcb_lock);
+
+ list_for_each_entry_safe(itr, tmp, &dcb_app_list, list) {
+ if (itr->ifindex == dev->ifindex) {
+ list_del(&itr->list);
+ kfree(itr);
+ }
+ }
+
+ spin_unlock(&dcb_lock);
+}
+
+static int dcbnl_netdevice_event(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+
+ switch (event) {
+ case NETDEV_UNREGISTER:
+ if (!dev->dcbnl_ops)
+ return NOTIFY_DONE;
+
+ dcbnl_flush_dev(dev);
+
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static struct notifier_block dcbnl_nb __read_mostly = {
+ .notifier_call = dcbnl_netdevice_event,
+};
+
static int __init dcbnl_init(void)
{
+ int err;
+
INIT_LIST_HEAD(&dcb_app_list);
+ err = register_netdevice_notifier(&dcbnl_nb);
+ if (err)
+ return err;
+
rtnl_register(PF_UNSPEC, RTM_GETDCB, dcb_doit, NULL, 0);
rtnl_register(PF_UNSPEC, RTM_SETDCB, dcb_doit, NULL, 0);
From: Zheyu Ma <[email protected]>
commit bd6f1fd5d33dfe5d1b4f2502d3694a7cc13f166d upstream.
During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.
The following log reveals it:
[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370
Fix this by checking whether the 'ci' is a null pointer first.
Fixes: 8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/arcnet/com20020-pci.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -136,6 +136,9 @@ static int com20020pci_probe(struct pci_
return -ENOMEM;
ci = (struct com20020_pci_card_info *)id->driver_data;
+ if (!ci)
+ return -EINVAL;
+
priv->ci = ci;
mm = &ci->misc_map;
On Mon, 7 Mar 2022 at 14:52, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.270 release.
> There are 42 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Mar 2022 09:16:25 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.270-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 4.14.270-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: [None, 'linux-4.14.y']
* git commit: 5ffa96cabf3ed80e6ade1e0670b39b5803501cf3
* git describe: v4.14.269-44-g5ffa96cabf3e
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-4.14.y/build/v4.14.269-44-g5ffa96cabf3e
## Test Regressions (compared to v4.14.269-38-g748cb9eabcfb)
No test regressions found.
## Metric Regressions (compared to v4.14.269-38-g748cb9eabcfb)
No metric regressions found.
## Test Fixes (compared to v4.14.269-38-g748cb9eabcfb)
No test fixes found.
## Metric Fixes (compared to v4.14.269-38-g748cb9eabcfb)
No metric fixes found.
## Test result summary
total: 83353, pass: 66534, fail: 1002, skip: 13185, xfail: 2632
## Build Summary
* arm: 280 total, 270 passed, 10 failed
* arm64: 35 total, 35 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 19 total, 19 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 22 total, 22 passed, 0 failed
* powerpc: 60 total, 12 passed, 48 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 34 total, 34 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kvm-unit-tests
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance
* vdso
--
Linaro LKFT
https://lkft.linaro.org