On Thu, 10 Aug 2023 12:22:54 +0200, Robert Marko wrote:
> Add a new PSGMII mode which is similar to QSGMII with the difference being
> that it combines 5 SGMII lines into a single link compared to 4 on QSGMII.
>
> It is commonly used by Qualcomm on their QCA807x PHY series.
>
> Signed-off-by: Robert Marko <[email protected]>
> ---
> Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On Thu, Aug 10, 2023 at 1:21 PM Rob Herring <[email protected]> wrote:
>
>
> On Thu, 10 Aug 2023 12:22:54 +0200, Robert Marko wrote:
> > Add a new PSGMII mode which is similar to QSGMII with the difference being
> > that it combines 5 SGMII lines into a single link compared to 4 on QSGMII.
> >
> > It is commonly used by Qualcomm on their QCA807x PHY series.
> >
> > Signed-off-by: Robert Marko <[email protected]>
> > ---
> > Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 +
> > 1 file changed, 1 insertion(+)
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
>
>
> doc reference errors (make refcheckdocs):
I am not getting any errors, nor there are any listed here as well.
Is this a bot issue maybe?
Regards
Robert
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>
--
Robert Marko
Staff Embedded Linux Engineer
Sartura Ltd.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: [email protected]
Web: http://www.sartura.hr
On Thu, Aug 10, 2023 at 5:32 AM Robert Marko <[email protected]> wrote:
>
> On Thu, Aug 10, 2023 at 1:21 PM Rob Herring <[email protected]> wrote:
> >
> >
> > On Thu, 10 Aug 2023 12:22:54 +0200, Robert Marko wrote:
> > > Add a new PSGMII mode which is similar to QSGMII with the difference being
> > > that it combines 5 SGMII lines into a single link compared to 4 on QSGMII.
> > >
> > > It is commonly used by Qualcomm on their QCA807x PHY series.
> > >
> > > Signed-off-by: Robert Marko <[email protected]>
> > > ---
> > > Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> >
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> >
> > yamllint warnings/errors:
> >
> > dtschema/dtc warnings/errors:
> >
> >
> > doc reference errors (make refcheckdocs):
>
> I am not getting any errors, nor there are any listed here as well.
> Is this a bot issue maybe?
Yes. Converting dtschema to pyproject.toml yesterday did not go well...
Rob