From: Lad Prabhakar <[email protected]>
Hi All,
This patch series aims to split up the RZ/G2UL SoC DTSI into common parts
so that this can be shared with the RZ/Five SoC.
Implementation is based on the discussion [0] where I have used option#2.
The Renesas RZ/G2UL (ARM64) and RZ/Five (RISC-V) have almost the same
identical blocks to avoid duplication a base SoC dtsi (r9a07g043.dtsi) is
created which will be used by the RZ/G2UL (r9a07g043u.dtsi) and RZ/Five
(r9a07g043F.dtsi)
Sending this as an RFC to get some feedback.
r9a07g043f.dtsi will look something like below:
#include <dt-bindings/interrupt-controller/irq.h>
#define SOC_PERIPHERAL_IRQ_NUMBER(nr) (nr + 32)
#define SOC_PERIPHERAL_IRQ(nr, na) SOC_PERIPHERAL_IRQ_NUMBER(nr) na
#include <arm64/renesas/r9a07g043.dtsi>
/ {
...
...
};
Although patch#2 can be merged into patch#1 just wanted to keep them separated
for easier review.
RFC-> RESEND RFC
* Patches rebased on [1]
RFC: [2]
[0] https://lore.kernel.org/linux-arm-kernel/Yyt8s5+pyoysVNeC@spud/T/
[1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/[email protected]/
[2] https://patchwork.kernel.org/project/linux-renesas-soc/cover/[email protected]/
Cheers,
Prabhakar
Lad Prabhakar (2):
arm64: dts: renesas: r9a07g043: Introduce SOC_PERIPHERAL_IRQ() macro
to specify interrupt property
arm64: dts: renesas: r9a07g043: Split out RZ/G2UL SoC specific parts
arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 347 ++++++++----------
arch/arm64/boot/dts/renesas/r9a07g043u.dtsi | 72 ++++
.../boot/dts/renesas/r9a07g043u11-smarc.dts | 2 +-
3 files changed, 220 insertions(+), 201 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
--
2.25.1
From: Lad Prabhakar <[email protected]>
Introduce SOC_PERIPHERAL_IRQ() macro to specify interrupt property so
that we can share the common parts of the SoC DTSI with the RZ/Five
(RISC-V) SoC and the RZ/G2UL (ARM64) SoC.
This patch adds a new file r9a07g043u.dtsi to separate out RZ/G2UL
(ARM64) SoC specific parts. No functional changes (same DTB).
Signed-off-by: Lad Prabhakar <[email protected]>
---
arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 301 +++++++++---------
arch/arm64/boot/dts/renesas/r9a07g043u.dtsi | 12 +
.../boot/dts/renesas/r9a07g043u11-smarc.dts | 2 +-
3 files changed, 163 insertions(+), 152 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
index c1fb29de2fa4..c41840e32c30 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g043.dtsi
@@ -5,7 +5,6 @@
* Copyright (C) 2022 Renesas Electronics Corp.
*/
-#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r9a07g043-cpg.h>
/ {
@@ -107,10 +106,10 @@ ssi0: ssi@10049c00 {
compatible = "renesas,r9a07g043-ssi",
"renesas,rz-ssi";
reg = <0 0x10049c00 0 0x400>;
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(326, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(327, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(328, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(329, IRQ_TYPE_EDGE_RISING)>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G043_SSI0_PCLK2>,
<&cpg CPG_MOD R9A07G043_SSI0_PCLK_SFR>,
@@ -128,10 +127,10 @@ ssi1: ssi@1004a000 {
compatible = "renesas,r9a07g043-ssi",
"renesas,rz-ssi";
reg = <0 0x1004a000 0 0x400>;
- interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(330, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(331, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(332, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(333, IRQ_TYPE_EDGE_RISING)>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G043_SSI1_PCLK2>,
<&cpg CPG_MOD R9A07G043_SSI1_PCLK_SFR>,
@@ -149,10 +148,10 @@ ssi2: ssi@1004a400 {
compatible = "renesas,r9a07g043-ssi",
"renesas,rz-ssi";
reg = <0 0x1004a400 0 0x400>;
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(334, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(335, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(336, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(337, IRQ_TYPE_EDGE_RISING)>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G043_SSI2_PCLK2>,
<&cpg CPG_MOD R9A07G043_SSI2_PCLK_SFR>,
@@ -170,10 +169,10 @@ ssi3: ssi@1004a800 {
compatible = "renesas,r9a07g043-ssi",
"renesas,rz-ssi";
reg = <0 0x1004a800 0 0x400>;
- interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(338, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(339, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(340, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(341, IRQ_TYPE_EDGE_RISING)>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G043_SSI3_PCLK2>,
<&cpg CPG_MOD R9A07G043_SSI3_PCLK_SFR>,
@@ -190,9 +189,9 @@ ssi3: ssi@1004a800 {
spi0: spi@1004ac00 {
compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
reg = <0 0x1004ac00 0 0x400>;
- interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(415, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(413, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(414, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "error", "rx", "tx";
clocks = <&cpg CPG_MOD R9A07G043_RSPI0_CLKB>;
resets = <&cpg R9A07G043_RSPI0_RST>;
@@ -208,9 +207,9 @@ spi0: spi@1004ac00 {
spi1: spi@1004b000 {
compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
reg = <0 0x1004b000 0 0x400>;
- interrupts = <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(418, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(416, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(417, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "error", "rx", "tx";
clocks = <&cpg CPG_MOD R9A07G043_RSPI1_CLKB>;
resets = <&cpg R9A07G043_RSPI1_RST>;
@@ -226,9 +225,9 @@ spi1: spi@1004b000 {
spi2: spi@1004b400 {
compatible = "renesas,r9a07g043-rspi", "renesas,rspi-rz";
reg = <0 0x1004b400 0 0x400>;
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(421, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(419, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(420, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "error", "rx", "tx";
clocks = <&cpg CPG_MOD R9A07G043_RSPI2_CLKB>;
resets = <&cpg R9A07G043_RSPI2_RST>;
@@ -245,12 +244,12 @@ scif0: serial@1004b800 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
reg = <0 0x1004b800 0 0x400>;
- interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(380, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(382, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(383, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(381, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(384, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(384, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "eri", "rxi", "txi",
"bri", "dri", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
@@ -264,12 +263,12 @@ scif1: serial@1004bc00 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
reg = <0 0x1004bc00 0 0x400>;
- interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(385, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(387, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(388, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(386, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(389, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(389, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "eri", "rxi", "txi",
"bri", "dri", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCIF1_CLK_PCK>;
@@ -283,12 +282,12 @@ scif2: serial@1004c000 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
reg = <0 0x1004c000 0 0x400>;
- interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(390, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(392, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(393, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(391, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(394, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(394, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "eri", "rxi", "txi",
"bri", "dri", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCIF2_CLK_PCK>;
@@ -302,12 +301,12 @@ scif3: serial@1004c400 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
reg = <0 0x1004c400 0 0x400>;
- interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(395, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(397, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(398, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(396, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(399, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(399, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "eri", "rxi", "txi",
"bri", "dri", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCIF3_CLK_PCK>;
@@ -321,12 +320,12 @@ scif4: serial@1004c800 {
compatible = "renesas,scif-r9a07g043",
"renesas,scif-r9a07g044";
reg = <0 0x1004c800 0 0x400>;
- interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(400, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(402, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(403, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(401, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(404, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(404, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "eri", "rxi", "txi",
"bri", "dri", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCIF4_CLK_PCK>;
@@ -339,10 +338,10 @@ scif4: serial@1004c800 {
sci0: serial@1004d000 {
compatible = "renesas,r9a07g043-sci", "renesas,sci";
reg = <0 0x1004d000 0 0x400>;
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 406 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 407 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(405, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(406, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(407, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(408, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "eri", "rxi", "txi", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCI0_CLKP>;
clock-names = "fck";
@@ -354,10 +353,10 @@ sci0: serial@1004d000 {
sci1: serial@1004d400 {
compatible = "renesas,r9a07g043-sci", "renesas,sci";
reg = <0 0x1004d400 0 0x400>;
- interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(409, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(410, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(411, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(412, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "eri", "rxi", "txi", "tei";
clocks = <&cpg CPG_MOD R9A07G043_SCI1_CLKP>;
clock-names = "fck";
@@ -369,14 +368,14 @@ sci1: serial@1004d400 {
canfd: can@10050000 {
compatible = "renesas,r9a07g043-canfd", "renesas,rzg2l-canfd";
reg = <0 0x10050000 0 0x8000>;
- interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(426, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(427, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(422, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(424, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(428, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(423, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(425, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(429, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "g_err", "g_recc",
"ch0_err", "ch0_rec", "ch0_trx",
"ch1_err", "ch1_rec", "ch1_trx";
@@ -405,14 +404,14 @@ i2c0: i2c@10058000 {
#size-cells = <0>;
compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
reg = <0 0x10058000 0 0x400>;
- interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 348 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 349 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(350, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(348, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(349, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(352, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(353, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(351, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(354, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(355, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "tei", "ri", "ti", "spi", "sti",
"naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G043_I2C0_PCLK>;
@@ -427,14 +426,14 @@ i2c1: i2c@10058400 {
#size-cells = <0>;
compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
reg = <0 0x10058400 0 0x400>;
- interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 356 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 357 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(358, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(356, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(357, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(360, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(361, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(359, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(362, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(363, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "tei", "ri", "ti", "spi", "sti",
"naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G043_I2C1_PCLK>;
@@ -449,14 +448,14 @@ i2c2: i2c@10058800 {
#size-cells = <0>;
compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
reg = <0 0x10058800 0 0x400>;
- interrupts = <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(366, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(364, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(365, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(368, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(369, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(367, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(370, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(371, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "tei", "ri", "ti", "spi", "sti",
"naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G043_I2C2_PCLK>;
@@ -471,14 +470,14 @@ i2c3: i2c@10058c00 {
#size-cells = <0>;
compatible = "renesas,riic-r9a07g043", "renesas,riic-rz";
reg = <0 0x10058c00 0 0x400>;
- interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 372 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(374, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(372, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(373, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(376, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(377, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(375, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(378, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(379, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "tei", "ri", "ti", "spi", "sti",
"naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G043_I2C3_PCLK>;
@@ -491,7 +490,7 @@ i2c3: i2c@10058c00 {
adc: adc@10059000 {
compatible = "renesas,r9a07g043-adc", "renesas,rzg2l-adc";
reg = <0 0x10059000 0 0x400>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(347, IRQ_TYPE_EDGE_RISING)>;
clocks = <&cpg CPG_MOD R9A07G043_ADC_ADCLK>,
<&cpg CPG_MOD R9A07G043_ADC_PCLK>;
clock-names = "adclk", "pclk";
@@ -551,10 +550,10 @@ cpg: clock-controller@11010000 {
sysc: system-controller@11020000 {
compatible = "renesas,r9a07g043-sysc";
reg = <0 0x11020000 0 0x10000>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(42, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(43, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(44, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(45, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "lpm_int", "ca55stbydone_int",
"cm33stbyr_int", "ca55_deny";
status = "disabled";
@@ -578,23 +577,23 @@ dmac: dma-controller@11820000 {
"renesas,rz-dmac";
reg = <0 0x11820000 0 0x10000>,
<0 0x11830000 0 0x10000>;
- interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(141, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(125, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(126, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(127, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(128, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(129, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(130, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(131, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(132, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(133, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(134, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(135, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(136, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(137, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(138, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(139, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(140, IRQ_TYPE_EDGE_RISING)>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
@@ -623,8 +622,8 @@ sdhi0: mmc@11c00000 {
compatible = "renesas,sdhi-r9a07g043",
"renesas,rcar-gen3-sdhi";
reg = <0x0 0x11c00000 0 0x10000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(104, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(105, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_SDHI0_IMCLK>,
<&cpg CPG_MOD R9A07G043_SDHI0_CLK_HS>,
<&cpg CPG_MOD R9A07G043_SDHI0_IMCLK2>,
@@ -639,8 +638,8 @@ sdhi1: mmc@11c10000 {
compatible = "renesas,sdhi-r9a07g043",
"renesas,rcar-gen3-sdhi";
reg = <0x0 0x11c10000 0 0x10000>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(106, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(107, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_SDHI1_IMCLK>,
<&cpg CPG_MOD R9A07G043_SDHI1_CLK_HS>,
<&cpg CPG_MOD R9A07G043_SDHI1_IMCLK2>,
@@ -655,9 +654,9 @@ eth0: ethernet@11c20000 {
compatible = "renesas,r9a07g043-gbeth",
"renesas,rzg2l-gbeth";
reg = <0 0x11c20000 0 0x10000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(84, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(85, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(86, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "mux", "fil", "arp_ns";
phy-mode = "rgmii";
clocks = <&cpg CPG_MOD R9A07G043_ETH0_CLK_AXI>,
@@ -675,9 +674,9 @@ eth1: ethernet@11c30000 {
compatible = "renesas,r9a07g043-gbeth",
"renesas,rzg2l-gbeth";
reg = <0 0x11c30000 0 0x10000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(87, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(88, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(89, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "mux", "fil", "arp_ns";
phy-mode = "rgmii";
clocks = <&cpg CPG_MOD R9A07G043_ETH1_CLK_AXI>,
@@ -705,7 +704,7 @@ phyrst: usbphy-ctrl@11c40000 {
ohci0: usb@11c50000 {
compatible = "generic-ohci";
reg = <0 0x11c50000 0 0x100>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(91, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
<&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
resets = <&phyrst 0>,
@@ -719,7 +718,7 @@ ohci0: usb@11c50000 {
ohci1: usb@11c70000 {
compatible = "generic-ohci";
reg = <0 0x11c70000 0 0x100>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(96, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
<&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
resets = <&phyrst 1>,
@@ -733,7 +732,7 @@ ohci1: usb@11c70000 {
ehci0: usb@11c50100 {
compatible = "generic-ehci";
reg = <0 0x11c50100 0 0x100>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(92, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
<&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
resets = <&phyrst 0>,
@@ -748,7 +747,7 @@ ehci0: usb@11c50100 {
ehci1: usb@11c70100 {
compatible = "generic-ehci";
reg = <0 0x11c70100 0 0x100>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(97, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
<&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
resets = <&phyrst 1>,
@@ -764,7 +763,7 @@ usb2_phy0: usb-phy@11c50200 {
compatible = "renesas,usb2-phy-r9a07g043",
"renesas,rzg2l-usb2-phy";
reg = <0 0x11c50200 0 0x700>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(94, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
<&cpg CPG_MOD R9A07G043_USB_U2H0_HCLK>;
resets = <&phyrst 0>;
@@ -777,7 +776,7 @@ usb2_phy1: usb-phy@11c70200 {
compatible = "renesas,usb2-phy-r9a07g043",
"renesas,rzg2l-usb2-phy";
reg = <0 0x11c70200 0 0x700>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(99, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
<&cpg CPG_MOD R9A07G043_USB_U2H1_HCLK>;
resets = <&phyrst 1>;
@@ -790,10 +789,10 @@ hsusb: usb@11c60000 {
compatible = "renesas,usbhs-r9a07g043",
"renesas,rza2-usbhs";
reg = <0 0x11c60000 0 0x10000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(100, IRQ_TYPE_EDGE_RISING)>,
+ <SOC_PERIPHERAL_IRQ(101, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(102, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(103, IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD R9A07G043_USB_PCLK>,
<&cpg CPG_MOD R9A07G043_USB_U2P_EXR_CPUCLK>;
resets = <&phyrst 0>,
@@ -812,8 +811,8 @@ wdt0: watchdog@12800800 {
clocks = <&cpg CPG_MOD R9A07G043_WDT0_PCLK>,
<&cpg CPG_MOD R9A07G043_WDT0_CLK>;
clock-names = "pclk", "oscclk";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <SOC_PERIPHERAL_IRQ(49, IRQ_TYPE_LEVEL_HIGH)>,
+ <SOC_PERIPHERAL_IRQ(50, IRQ_TYPE_LEVEL_HIGH)>;
interrupt-names = "wdt", "perrout";
resets = <&cpg R9A07G043_WDT0_PRESETN>;
power-domains = <&cpg>;
@@ -824,7 +823,7 @@ ostm0: timer@12801000 {
compatible = "renesas,r9a07g043-ostm",
"renesas,ostm";
reg = <0x0 0x12801000 0x0 0x400>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(46, IRQ_TYPE_EDGE_RISING)>;
clocks = <&cpg CPG_MOD R9A07G043_OSTM0_PCLK>;
resets = <&cpg R9A07G043_OSTM0_PRESETZ>;
power-domains = <&cpg>;
@@ -835,7 +834,7 @@ ostm1: timer@12801400 {
compatible = "renesas,r9a07g043-ostm",
"renesas,ostm";
reg = <0x0 0x12801400 0x0 0x400>;
- interrupts = <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(47, IRQ_TYPE_EDGE_RISING)>;
clocks = <&cpg CPG_MOD R9A07G043_OSTM1_PCLK>;
resets = <&cpg R9A07G043_OSTM1_PRESETZ>;
power-domains = <&cpg>;
@@ -846,7 +845,7 @@ ostm2: timer@12801800 {
compatible = "renesas,r9a07g043-ostm",
"renesas,ostm";
reg = <0x0 0x12801800 0x0 0x400>;
- interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <SOC_PERIPHERAL_IRQ(48, IRQ_TYPE_EDGE_RISING)>;
clocks = <&cpg CPG_MOD R9A07G043_OSTM2_PCLK>;
resets = <&cpg R9A07G043_OSTM2_PRESETZ>;
power-domains = <&cpg>;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
new file mode 100644
index 000000000000..be84392ee47f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2UL SoC
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#define SOC_PERIPHERAL_IRQ(nr, na) GIC_SPI nr na
+
+#include "r9a07g043.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
index 059885a01ede..01483b4302c2 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
@@ -17,7 +17,7 @@
#define SW_SW0_DEV_SEL 1
#define SW_ET0_EN_N 1
-#include "r9a07g043.dtsi"
+#include "r9a07g043u.dtsi"
#include "rzg2ul-smarc-som.dtsi"
#include "rzg2ul-smarc.dtsi"
--
2.25.1
Hi Prabhakar,
On Mon, Oct 17, 2022 at 11:12 AM Prabhakar <[email protected]> wrote:
> From: Lad Prabhakar <[email protected]>
>
> Introduce SOC_PERIPHERAL_IRQ() macro to specify interrupt property so
> that we can share the common parts of the SoC DTSI with the RZ/Five
> (RISC-V) SoC and the RZ/G2UL (ARM64) SoC.
>
> This patch adds a new file r9a07g043u.dtsi to separate out RZ/G2UL
> (ARM64) SoC specific parts. No functional changes (same DTB).
>
> Signed-off-by: Lad Prabhakar <[email protected]>
Thanks for your patch!
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
> @@ -0,0 +1,12 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +/*
> + * Device Tree Source for the RZ/G2UL SoC
> + *
> + * Copyright (C) 2022 Renesas Electronics Corp.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +#define SOC_PERIPHERAL_IRQ(nr, na) GIC_SPI nr na
s/na/flags/
Originally, when I assumed incorrectly that dtc does not support
arithmetic, I used "nr" and "na" in the macro I proposed to mean RISC-V
("r") resp. ARM ("a") interrupt number. Apparently the names stuck,
although the second parameter now has a completely different meaning ;-)
However, as the NCEPLIC does support interrupt flags, unlike the SiFive
PLIC, there is no need to have the flags parameter in the macro.
> +
> +#include "r9a07g043.dtsi"
The rest LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Prabhakar,
(now replying to the latest version)
On Mon, Oct 17, 2022 at 11:12 AM Prabhakar <[email protected]> wrote:
> This patch series aims to split up the RZ/G2UL SoC DTSI into common parts
> so that this can be shared with the RZ/Five SoC.
>
> Implementation is based on the discussion [0] where I have used option#2.
>
> The Renesas RZ/G2UL (ARM64) and RZ/Five (RISC-V) have almost the same
> identical blocks to avoid duplication a base SoC dtsi (r9a07g043.dtsi) is
> created which will be used by the RZ/G2UL (r9a07g043u.dtsi) and RZ/Five
> (r9a07g043F.dtsi)
Thanks for your series!
> Sending this as an RFC to get some feedback.
>
> r9a07g043f.dtsi will look something like below:
>
> #include <dt-bindings/interrupt-controller/irq.h>
>
> #define SOC_PERIPHERAL_IRQ_NUMBER(nr) (nr + 32)
> #define SOC_PERIPHERAL_IRQ(nr, na) SOC_PERIPHERAL_IRQ_NUMBER(nr) na
Originally, when I assumed incorrectly that dtc does not support
arithmetic, I used "nr" and "na" in the macro I proposed to mean RISC-V
("r") resp. ARM ("a") interrupt number. Apparently the names stuck,
although the second parameter now has a completely different meaning ;-)
However, as the NCEPLIC does support interrupt flags, unlike the SiFive
PLIC, there is no need to have the flags parameter in the macro.
Moreover, it looks like the SOC_PERIPHERAL_IRQ_NUMBER()
intermediate is not needed, so you can just write:
#define SOC_PERIPHERAL_IRQ(nr) (nr + 32)
> #include <arm64/renesas/r9a07g043.dtsi>
>
> / {
> ...
> ...
> };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert,
Thank you for the review.
On Tue, Oct 25, 2022 at 1:28 PM Geert Uytterhoeven <[email protected]> wrote:
>
> Hi Prabhakar,
>
> On Mon, Oct 17, 2022 at 11:12 AM Prabhakar <[email protected]> wrote:
> > From: Lad Prabhakar <[email protected]>
> >
> > Introduce SOC_PERIPHERAL_IRQ() macro to specify interrupt property so
> > that we can share the common parts of the SoC DTSI with the RZ/Five
> > (RISC-V) SoC and the RZ/G2UL (ARM64) SoC.
> >
> > This patch adds a new file r9a07g043u.dtsi to separate out RZ/G2UL
> > (ARM64) SoC specific parts. No functional changes (same DTB).
> >
> > Signed-off-by: Lad Prabhakar <[email protected]>
>
> Thanks for your patch!
>
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/renesas/r9a07g043u.dtsi
> > @@ -0,0 +1,12 @@
> > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +/*
> > + * Device Tree Source for the RZ/G2UL SoC
> > + *
> > + * Copyright (C) 2022 Renesas Electronics Corp.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +#define SOC_PERIPHERAL_IRQ(nr, na) GIC_SPI nr na
>
> s/na/flags/
>
> Originally, when I assumed incorrectly that dtc does not support
> arithmetic, I used "nr" and "na" in the macro I proposed to mean RISC-V
> ("r") resp. ARM ("a") interrupt number. Apparently the names stuck,
> although the second parameter now has a completely different meaning ;-)
>
> However, as the NCEPLIC does support interrupt flags, unlike the SiFive
> PLIC, there is no need to have the flags parameter in the macro.
>
Ok, I'll drop the second parameter.
Cheers,
Prabhakar
Hi Geert.
Thank you for the review.
On Tue, Oct 25, 2022 at 1:42 PM Geert Uytterhoeven <[email protected]> wrote:
>
> Hi Prabhakar,
>
> (now replying to the latest version)
>
> On Mon, Oct 17, 2022 at 11:12 AM Prabhakar <[email protected]> wrote:
> > This patch series aims to split up the RZ/G2UL SoC DTSI into common parts
> > so that this can be shared with the RZ/Five SoC.
> >
> > Implementation is based on the discussion [0] where I have used option#2.
> >
> > The Renesas RZ/G2UL (ARM64) and RZ/Five (RISC-V) have almost the same
> > identical blocks to avoid duplication a base SoC dtsi (r9a07g043.dtsi) is
> > created which will be used by the RZ/G2UL (r9a07g043u.dtsi) and RZ/Five
> > (r9a07g043F.dtsi)
>
> Thanks for your series!
>
> > Sending this as an RFC to get some feedback.
> >
> > r9a07g043f.dtsi will look something like below:
> >
> > #include <dt-bindings/interrupt-controller/irq.h>
> >
> > #define SOC_PERIPHERAL_IRQ_NUMBER(nr) (nr + 32)
> > #define SOC_PERIPHERAL_IRQ(nr, na) SOC_PERIPHERAL_IRQ_NUMBER(nr) na
>
> Originally, when I assumed incorrectly that dtc does not support
> arithmetic, I used "nr" and "na" in the macro I proposed to mean RISC-V
> ("r") resp. ARM ("a") interrupt number. Apparently the names stuck,
> although the second parameter now has a completely different meaning ;-)
>
> However, as the NCEPLIC does support interrupt flags, unlike the SiFive
> PLIC, there is no need to have the flags parameter in the macro.
>
> Moreover, it looks like the SOC_PERIPHERAL_IRQ_NUMBER()
> intermediate is not needed, so you can just write:
>
> #define SOC_PERIPHERAL_IRQ(nr) (nr + 32)
>
Agreed, I'll change it as per your suggestion and send a v2.
Cheers,
Prabhakar