From: Lad, Prabhakar <[email protected]>
add OF support for the tvp514x driver.
Signed-off-by: Lad, Prabhakar <[email protected]>
Cc: Hans Verkuil <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Guennadi Liakhovetski <[email protected]>
Cc: Sylwester Nawrocki <[email protected]>
Cc: Sakari Ailus <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
Tested on da850-evm.
RFC v1: https://patchwork.kernel.org/patch/2030061/
RFC v2: https://patchwork.kernel.org/patch/2061811/
Changes for current version from RFC v2:
1: Fixed review comments pointed by Sylwester.
Changes for v2:
1: Listed all the compatible property values in the documentation text file.
2: Removed "-decoder" from compatible property values.
3: Added a reference to the V4L2 DT bindings documentation to explain
what the port and endpoint nodes are for.
4: Fixed some Nits pointed by Laurent.
5: Removed unnecessary header file includes and sort them alphabetically.
Changes for v3:
1: Rebased on patch https://patchwork.kernel.org/patch/2539411/
Changes for v4:
1: added missing call for of_node_put().
2: Rebased the patch on v3.11.
.../devicetree/bindings/media/i2c/tvp514x.txt | 45 ++++++++++++++
drivers/media/i2c/tvp514x.c | 62 ++++++++++++++++++--
2 files changed, 101 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
new file mode 100644
index 0000000..cc09424
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
@@ -0,0 +1,45 @@
+* Texas Instruments TVP514x video decoder
+
+The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
+digital video decoder that digitizes and decodes all popular baseband analog
+video formats into digital video component. The tvp514x decoder supports analog-
+to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
+conversion and decoding of NTSC, PAL and SECAM composite and S-video into
+component YCbCr.
+
+Required Properties :
+- compatible : value should be either one among the following
+ (a) "ti,tvp5146" for tvp5146 decoder.
+ (b) "ti,tvp5146m2" for tvp5146m2 decoder.
+ (c) "ti,tvp5147" for tvp5147 decoder.
+ (d) "ti,tvp5147m1" for tvp5147m1 decoder.
+
+- hsync-active: HSYNC Polarity configuration for endpoint.
+
+- vsync-active: VSYNC Polarity configuration for endpoint.
+
+- pclk-sample: Clock polarity of the endpoint.
+
+
+For further reading of port node refer Documentation/devicetree/bindings/media/
+video-interfaces.txt.
+
+Example:
+
+ i2c0@1c22000 {
+ ...
+ ...
+ tvp514x@5c {
+ compatible = "ti,tvp5146";
+ reg = <0x5c>;
+
+ port {
+ tvp514x_1: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+ };
+ };
+ };
+ ...
+ };
diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
index 7438e01..803f3b8 100644
--- a/drivers/media/i2c/tvp514x.c
+++ b/drivers/media/i2c/tvp514x.c
@@ -38,6 +38,7 @@
#include <media/v4l2-device.h>
#include <media/v4l2-common.h>
+#include <media/v4l2-of.h>
#include <media/v4l2-mediabus.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-ctrls.h>
@@ -1055,6 +1056,42 @@ static struct tvp514x_decoder tvp514x_dev = {
};
+static struct tvp514x_platform_data *
+tvp514x_get_pdata(struct i2c_client *client)
+{
+ struct tvp514x_platform_data *pdata = NULL;
+ struct v4l2_of_endpoint bus_cfg;
+ struct device_node *endpoint;
+ unsigned int flags;
+
+ if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
+ return client->dev.platform_data;
+
+ endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
+ if (!endpoint)
+ goto done;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ goto done;
+
+ v4l2_of_parse_endpoint(endpoint, &bus_cfg);
+ flags = bus_cfg.bus.parallel.flags;
+
+ if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
+ pdata->hs_polarity = 1;
+
+ if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
+ pdata->vs_polarity = 1;
+
+ if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
+ pdata->clk_polarity = 1;
+
+done:
+ of_node_put(endpoint);
+ return pdata;
+}
+
/**
* tvp514x_probe() - decoder driver i2c probe handler
* @client: i2c driver client device structure
@@ -1066,19 +1103,20 @@ static struct tvp514x_decoder tvp514x_dev = {
static int
tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
+ struct tvp514x_platform_data *pdata = tvp514x_get_pdata(client);
struct tvp514x_decoder *decoder;
struct v4l2_subdev *sd;
int ret;
+ if (pdata == NULL) {
+ dev_err(&client->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- if (!client->dev.platform_data) {
- v4l2_err(client, "No platform data!!\n");
- return -ENODEV;
- }
-
decoder = devm_kzalloc(&client->dev, sizeof(*decoder), GFP_KERNEL);
if (!decoder)
return -ENOMEM;
@@ -1090,7 +1128,7 @@ tvp514x_probe(struct i2c_client *client, const struct i2c_device_id *id)
sizeof(tvp514x_reg_list_default));
/* Copy board specific information here */
- decoder->pdata = client->dev.platform_data;
+ decoder->pdata = pdata;
/**
* Fetch platform specific data, and configure the
@@ -1230,8 +1268,20 @@ static const struct i2c_device_id tvp514x_id[] = {
MODULE_DEVICE_TABLE(i2c, tvp514x_id);
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id tvp514x_of_match[] = {
+ { .compatible = "ti,tvp5146", },
+ { .compatible = "ti,tvp5146m2", },
+ { .compatible = "ti,tvp5147", },
+ { .compatible = "ti,tvp5147m1", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, tvp514x_of_match);
+#endif
+
static struct i2c_driver tvp514x_driver = {
.driver = {
+ .of_match_table = of_match_ptr(tvp514x_of_match),
.owner = THIS_MODULE,
.name = TVP514X_MODULE_NAME,
},
--
1.7.0.4
Hi All,
On Sun, May 26, 2013 at 6:10 PM, Prabhakar Lad
<[email protected]> wrote:
> From: Lad, Prabhakar <[email protected]>
>
> add OF support for the tvp514x driver.
>
> Signed-off-by: Lad, Prabhakar <[email protected]>
> Cc: Hans Verkuil <[email protected]>
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Guennadi Liakhovetski <[email protected]>
> Cc: Sylwester Nawrocki <[email protected]>
> Cc: Sakari Ailus <[email protected]>
> Cc: Grant Likely <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Rob Landley <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> ---
> Tested on da850-evm.
>
> RFC v1: https://patchwork.kernel.org/patch/2030061/
> RFC v2: https://patchwork.kernel.org/patch/2061811/
>
> Changes for current version from RFC v2:
> 1: Fixed review comments pointed by Sylwester.
>
> Changes for v2:
> 1: Listed all the compatible property values in the documentation text file.
> 2: Removed "-decoder" from compatible property values.
> 3: Added a reference to the V4L2 DT bindings documentation to explain
> what the port and endpoint nodes are for.
> 4: Fixed some Nits pointed by Laurent.
> 5: Removed unnecessary header file includes and sort them alphabetically.
>
> Changes for v3:
> 1: Rebased on patch https://patchwork.kernel.org/patch/2539411/
>
> Changes for v4:
> 1: added missing call for of_node_put().
> 2: Rebased the patch on v3.11.
>
> .../devicetree/bindings/media/i2c/tvp514x.txt | 45 ++++++++++++++
> drivers/media/i2c/tvp514x.c | 62 ++++++++++++++++++--
> 2 files changed, 101 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/tvp514x.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
> new file mode 100644
> index 0000000..cc09424
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt
> @@ -0,0 +1,45 @@
> +* Texas Instruments TVP514x video decoder
> +
> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, single-chip
> +digital video decoder that digitizes and decodes all popular baseband analog
> +video formats into digital video component. The tvp514x decoder supports analog-
> +to-digital (A/D) conversion of component RGB and YPbPr signals as well as A/D
> +conversion and decoding of NTSC, PAL and SECAM composite and S-video into
> +component YCbCr.
> +
> +Required Properties :
> +- compatible : value should be either one among the following
> + (a) "ti,tvp5146" for tvp5146 decoder.
> + (b) "ti,tvp5146m2" for tvp5146m2 decoder.
> + (c) "ti,tvp5147" for tvp5147 decoder.
> + (d) "ti,tvp5147m1" for tvp5147m1 decoder.
> +
> +- hsync-active: HSYNC Polarity configuration for endpoint.
> +
> +- vsync-active: VSYNC Polarity configuration for endpoint.
> +
> +- pclk-sample: Clock polarity of the endpoint.
> +
> +
> +For further reading of port node refer Documentation/devicetree/bindings/media/
> +video-interfaces.txt.
> +
> +Example:
> +
> + i2c0@1c22000 {
> + ...
> + ...
> + tvp514x@5c {
> + compatible = "ti,tvp5146";
> + reg = <0x5c>;
> +
> + port {
> + tvp514x_1: endpoint {
> + hsync-active = <1>;
> + vsync-active = <1>;
> + pclk-sample = <0>;
> + };
> + };
> + };
> + ...
> + };
> diff --git a/drivers/media/i2c/tvp514x.c b/drivers/media/i2c/tvp514x.c
> index 7438e01..803f3b8 100644
> --- a/drivers/media/i2c/tvp514x.c
> +++ b/drivers/media/i2c/tvp514x.c
> @@ -38,6 +38,7 @@
>
> #include <media/v4l2-device.h>
> #include <media/v4l2-common.h>
> +#include <media/v4l2-of.h>
> #include <media/v4l2-mediabus.h>
> #include <media/v4l2-chip-ident.h>
> #include <media/v4l2-ctrls.h>
> @@ -1055,6 +1056,42 @@ static struct tvp514x_decoder tvp514x_dev = {
>
> };
>
> +static struct tvp514x_platform_data *
> +tvp514x_get_pdata(struct i2c_client *client)
> +{
> + struct tvp514x_platform_data *pdata = NULL;
> + struct v4l2_of_endpoint bus_cfg;
> + struct device_node *endpoint;
> + unsigned int flags;
> +
> + if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
> + return client->dev.platform_data;
> +
> + endpoint = v4l2_of_get_next_endpoint(client->dev.of_node, NULL);
> + if (!endpoint)
> + goto done;
> +
Ahh this had to be return NULL I'll respin a new version fixing it.
Regards,
--Prabhakar Lad