Hi All,
This patch series adds support for sound in R8A7742 SoC DT.
Cheers,
Prabhakar
Lad Prabhakar (2):
dt-bindings: ASoC: renesas,rsnd: Add r8a7742 support
ARM: dts: r8a7742: Add audio support
.../devicetree/bindings/sound/renesas,rsnd.txt | 1 +
arch/arm/boot/dts/r8a7742.dtsi | 284 +++++++++++++++++++++
2 files changed, 285 insertions(+)
--
2.7.4
Document RZ/G1H (R8A7742) SoC bindings.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Marian-Cristian Rotariu <[email protected]>
---
Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 797fd03..1596f0d 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -263,6 +263,7 @@ Required properties:
"renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
"renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
Examples with soctypes are:
+ - "renesas,rcar_sound-r8a7742" (RZ/G1H)
- "renesas,rcar_sound-r8a7743" (RZ/G1M)
- "renesas,rcar_sound-r8a7744" (RZ/G1N)
- "renesas,rcar_sound-r8a7745" (RZ/G1E)
--
2.7.4
Add sound support for the RZ/G1H SoC (a.k.a. R8A7742).
This work is based on similar work done on the R8A7744 SoC.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Marian-Cristian Rotariu <[email protected]>
---
arch/arm/boot/dts/r8a7742.dtsi | 284 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 284 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 3a9c67b..3ed05c6 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -15,6 +15,27 @@
#address-cells = <2>;
#size-cells = <2>;
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -821,6 +842,269 @@
status = "disabled";
};
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a7742",
+ "renesas,rcar_sound-gen2";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+ <&cpg CPG_CORE R8A7742_CLK_M2>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "ctu.0", "ctu.1",
+ "mix.0", "mix.1",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>,
+ <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>,
+ <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>,
+ <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>,
+ <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>,
+ <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+ <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+ <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>,
+ <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>,
+ <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>,
+ <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a7742",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a7742",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
xhci: usb@ee000000 {
compatible = "renesas,xhci-r8a7742",
"renesas,rcar-gen2-xhci";
--
2.7.4
On Tue, May 26, 2020 at 11:02 PM Lad Prabhakar
<[email protected]> wrote:
> Document RZ/G1H (R8A7742) SoC bindings.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Marian-Cristian Rotariu <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
CC Morimoto-san
On Tue, May 26, 2020 at 11:02 PM Lad Prabhakar
<[email protected]> wrote:
> Add sound support for the RZ/G1H SoC (a.k.a. R8A7742).
>
> This work is based on similar work done on the R8A7744 SoC.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Marian-Cristian Rotariu <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
i.e. will queue in renesas-devel for v5.9.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Tue, May 26, 2020 at 10:01:43PM +0100, Lad Prabhakar wrote:
> Examples with soctypes are:
> + - "renesas,rcar_sound-r8a7742" (RZ/G1H)
> - "renesas,rcar_sound-r8a7743" (RZ/G1M)
> - "renesas,rcar_sound-r8a7744" (RZ/G1N)
> - "renesas,rcar_sound-r8a7745" (RZ/G1E)
I'd expect a matching patch adding this compatible to the driver.
On Wed, May 27, 2020 at 12:32:28PM +0100, Lad, Prabhakar wrote:
> On Wed, May 27, 2020 at 12:25 PM Mark Brown <[email protected]> wrote:
> > > + - "renesas,rcar_sound-r8a7742" (RZ/G1H)
> > I'd expect a matching patch adding this compatible to the driver.
> The Renesas R-Car sound for RZ/G1H is identical to the R-Car Gen2
> family. So no driver change is needed and the fallback compatible
> value "renesas,rcar_sound-gen2" will be used in the SOC DT.
Then the patch to add the compatible string will be trivial.
Hi Mark,
Thank you for the review.
On Wed, May 27, 2020 at 12:25 PM Mark Brown <[email protected]> wrote:
>
> On Tue, May 26, 2020 at 10:01:43PM +0100, Lad Prabhakar wrote:
>
> > Examples with soctypes are:
> > + - "renesas,rcar_sound-r8a7742" (RZ/G1H)
> > - "renesas,rcar_sound-r8a7743" (RZ/G1M)
> > - "renesas,rcar_sound-r8a7744" (RZ/G1N)
> > - "renesas,rcar_sound-r8a7745" (RZ/G1E)
>
> I'd expect a matching patch adding this compatible to the driver.
The Renesas R-Car sound for RZ/G1H is identical to the R-Car Gen2
family. So no driver change is needed and the fallback compatible
value "renesas,rcar_sound-gen2" will be used in the SOC DT.
Cheers,
--Prabhakar Lad
Hi
> > Add sound support for the RZ/G1H SoC (a.k.a. R8A7742).
> >
> > This work is based on similar work done on the R8A7744 SoC.
> >
> > Signed-off-by: Lad Prabhakar <[email protected]>
> > Reviewed-by: Marian-Cristian Rotariu <[email protected]>
>
> Reviewed-by: Geert Uytterhoeven <[email protected]>
> i.e. will queue in renesas-devel for v5.9.
Acked-by: Kuninori Morimoto <[email protected]>
Thank you for your help !!
Best regards
---
Kuninori Morimoto
On Tue, 26 May 2020 22:01:43 +0100, Lad Prabhakar wrote:
> Document RZ/G1H (R8A7742) SoC bindings.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Marian-Cristian Rotariu <[email protected]>
> ---
> Documentation/devicetree/bindings/sound/renesas,rsnd.txt | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On Tue, 26 May 2020 22:01:42 +0100, Lad Prabhakar wrote:
> This patch series adds support for sound in R8A7742 SoC DT.
>
> Cheers,
> Prabhakar
>
> Lad Prabhakar (2):
> dt-bindings: ASoC: renesas,rsnd: Add r8a7742 support
> ARM: dts: r8a7742: Add audio support
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] dt-bindings: ASoC: renesas,rsnd: Add r8a7742 support
commit: b6f10d3f2e6dfccf58c54e81c8af586b66a80ce4
[2/2] ARM: dts: r8a7742: Add audio support
(no commit info)
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark