this patch fixes following build warning:
gsc-core.c:350:17: warning: 'low_plane' may be used uninitialized
gsc-core.c:371:31: warning: 'high_plane' may be used uninitialized
Signed-off-by: Lad, Prabhakar <[email protected]>
---
drivers/media/platform/exynos-gsc/gsc-core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index 91d226b..6c71b17 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -347,8 +347,8 @@ void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
s_chk_addr = frm->addr.cb;
s_chk_len = frm->payload[1];
} else if (frm->fmt->num_planes == 3) {
- u32 low_addr, low_plane, mid_addr, mid_plane;
- u32 high_addr, high_plane;
+ u32 low_addr, low_plane = 0, mid_addr, mid_plane;
+ u32 high_addr, high_plane = 0;
u32 t_min, t_max;
t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr);
--
1.9.1
Em Tue, 18 Nov 2014 10:57:48 +0000
"Lad, Prabhakar" <[email protected]> escreveu:
> this patch fixes following build warning:
>
> gsc-core.c:350:17: warning: 'low_plane' may be used uninitialized
> gsc-core.c:371:31: warning: 'high_plane' may be used uninitialized
>
> Signed-off-by: Lad, Prabhakar <[email protected]>
> ---
> drivers/media/platform/exynos-gsc/gsc-core.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
> index 91d226b..6c71b17 100644
> --- a/drivers/media/platform/exynos-gsc/gsc-core.c
> +++ b/drivers/media/platform/exynos-gsc/gsc-core.c
> @@ -347,8 +347,8 @@ void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
> s_chk_addr = frm->addr.cb;
> s_chk_len = frm->payload[1];
> } else if (frm->fmt->num_planes == 3) {
> - u32 low_addr, low_plane, mid_addr, mid_plane;
> - u32 high_addr, high_plane;
> + u32 low_addr, low_plane = 0, mid_addr, mid_plane;
> + u32 high_addr, high_plane = 0;
> u32 t_min, t_max;
>
> t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr);
Actually, this just hides the error, without fixing.
If the address is not found, a real error occurs, and the address
is also invalid.
So, I think that the enclosed patch will be doing a better job fixing it.
Still, the entire code seems mostly useless on my eyes, as this function
seems to be used only for debugging purposes, and errors there aren't
actually handled properly.
[PATCH] [media] exynos-gsc: fix build warning
Fixes following build warnings:
gsc-core.c:350:17: warning: 'low_plane' may be used uninitialized
gsc-core.c:371:31: warning: 'high_plane' may be used uninitialized
Reported-by: Prabhakar Lad <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c
index 91d226b8fe5c..3062e9fac6da 100644
--- a/drivers/media/platform/exynos-gsc/gsc-core.c
+++ b/drivers/media/platform/exynos-gsc/gsc-core.c
@@ -319,21 +319,22 @@ int gsc_enum_fmt_mplane(struct v4l2_fmtdesc *f)
return 0;
}
-static u32 get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index)
+static int get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index, u32 *ret_addr)
{
if (frm->addr.y == addr) {
*index = 0;
- return frm->addr.y;
+ *ret_addr = frm->addr.y;
} else if (frm->addr.cb == addr) {
*index = 1;
- return frm->addr.cb;
+ *ret_addr = frm->addr.cb;
} else if (frm->addr.cr == addr) {
*index = 2;
- return frm->addr.cr;
+ *ret_addr = frm->addr.cr;
} else {
pr_err("Plane address is wrong");
return -EINVAL;
}
+ return 0;
}
void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
@@ -352,9 +353,11 @@ void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
u32 t_min, t_max;
t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr);
- low_addr = get_plane_info(frm, t_min, &low_plane);
+ if (get_plane_info(frm, t_min, &low_plane, &low_addr))
+ return;
t_max = max3(frm->addr.y, frm->addr.cb, frm->addr.cr);
- high_addr = get_plane_info(frm, t_max, &high_plane);
+ if (get_plane_info(frm, t_max, &high_plane, &high_addr))
+ return;
mid_plane = 3 - (low_plane + high_plane);
if (mid_plane == 0)
Hi Mauro,
On Tue, Nov 25, 2014 at 3:04 PM, Mauro Carvalho Chehab
<[email protected]> wrote:
> Em Tue, 18 Nov 2014 10:57:48 +0000
[Snip]
>
> -static u32 get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index)
> +static int get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index, u32 *ret_addr)
> {
> if (frm->addr.y == addr) {
> *index = 0;
> - return frm->addr.y;
> + *ret_addr = frm->addr.y;
> } else if (frm->addr.cb == addr) {
> *index = 1;
> - return frm->addr.cb;
> + *ret_addr = frm->addr.cb;
> } else if (frm->addr.cr == addr) {
> *index = 2;
> - return frm->addr.cr;
> + *ret_addr = frm->addr.cr;
> } else {
> pr_err("Plane address is wrong");
> return -EINVAL;
> }
> + return 0;
the control wont reach here! may be you can remove the complete else
part outside ?
with that change,
Reported-by: Lad, Prabhakar <[email protected]>
Acked-by: Lad, Prabhakar <[email protected]>
Thanks,
--Prabhakar Lad
> }
>
> void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
> @@ -352,9 +353,11 @@ void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
> u32 t_min, t_max;
>
> t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr);
> - low_addr = get_plane_info(frm, t_min, &low_plane);
> + if (get_plane_info(frm, t_min, &low_plane, &low_addr))
> + return;
> t_max = max3(frm->addr.y, frm->addr.cb, frm->addr.cr);
> - high_addr = get_plane_info(frm, t_max, &high_plane);
> + if (get_plane_info(frm, t_max, &high_plane, &high_addr))
> + return;
>
> mid_plane = 3 - (low_plane + high_plane);
> if (mid_plane == 0)
Hi,
On Tue, Nov 25, 2014 at 3:18 PM, Prabhakar Lad
<[email protected]> wrote:
> Hi Mauro,
>
> On Tue, Nov 25, 2014 at 3:04 PM, Mauro Carvalho Chehab
> <[email protected]> wrote:
>> Em Tue, 18 Nov 2014 10:57:48 +0000
> [Snip]
>>
>> -static u32 get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index)
>> +static int get_plane_info(struct gsc_frame *frm, u32 addr, u32 *index, u32 *ret_addr)
>> {
>> if (frm->addr.y == addr) {
>> *index = 0;
>> - return frm->addr.y;
>> + *ret_addr = frm->addr.y;
>> } else if (frm->addr.cb == addr) {
>> *index = 1;
>> - return frm->addr.cb;
>> + *ret_addr = frm->addr.cb;
>> } else if (frm->addr.cr == addr) {
>> *index = 2;
>> - return frm->addr.cr;
>> + *ret_addr = frm->addr.cr;
>> } else {
>> pr_err("Plane address is wrong");
>> return -EINVAL;
>> }
>> + return 0;
> the control wont reach here! may be you can remove the complete else
> part outside ?
>
Ah my bad :(, I missread 'ret_addr' to return.
Thanks,
--Prabhakar Lad
> with that change,
>
> Reported-by: Lad, Prabhakar <[email protected]>
> Acked-by: Lad, Prabhakar <[email protected]>
>
> Thanks,
> --Prabhakar Lad
>
>> }
>>
>> void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
>> @@ -352,9 +353,11 @@ void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm)
>> u32 t_min, t_max;
>>
>> t_min = min3(frm->addr.y, frm->addr.cb, frm->addr.cr);
>> - low_addr = get_plane_info(frm, t_min, &low_plane);
>> + if (get_plane_info(frm, t_min, &low_plane, &low_addr))
>> + return;
>> t_max = max3(frm->addr.y, frm->addr.cb, frm->addr.cr);
>> - high_addr = get_plane_info(frm, t_max, &high_plane);
>> + if (get_plane_info(frm, t_max, &high_plane, &high_addr))
>> + return;
>>
>> mid_plane = 3 - (low_plane + high_plane);
>> if (mid_plane == 0)