Hi Linus,
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
For the main set of series of patches for media subsystem, including:
- Document RC sysfs class;
- Added an API to setup scancode to allow waking up systems using
the Remote Controller;
- Add API for SDR devices. Drivers are still on staging;
- Some API improvements for getting EDID data from media
inputs/outputs;
- New DVB frontend driver for drx-j (ATSC);
- One driver (it913x/it9137) got removed, in favor of an improvement
on another driver (af9035);
- Added a skeleton V4L2 PCI driver at documentation;
- Added a dual flash driver (lm3646);
- Added a new IR driver (img-ir);
- Added an IR scancode decoder for the Sharp protocol;
- Some improvements at the usbtv driver, to allow its core to be
reused.
- Added a new SDR driver (rtl2832u_sdr);
- Added a new tuner driver (msi001);
- Several improvements at em28xx driver to fix PM support,
device removal and to split the V4L2 specific bits into a
separate sub-driver.
- One driver got converted to videobuf2 (s2255drv);
- The e4000 tuner driver now follows an improved binding model;
- Some fixes at V4L2 compat32 code;
- Several fixes and enhancements at videobuf2 code;
- Some cleanups at V4L2 API documentation;
- usual driver enhancements, new board additions and misc fixups.
Thanks!
Mauro
-
PS.: You'll find some minor conflicts between this changeset and upstream,
mainly due to some code that moved from V4L2 to OF subsystem.
I have a separate topic branch with the exynos5 changes that is
more affected by this. I'll send on a separate pull request, after
this one gets merged.
The following changes since commit 0414855fdc4a40da05221fc6062cccbc0c30f169:
Linux 3.14-rc5 (2014-03-02 18:56:16 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
for you to fetch changes up to a83b93a7480441a47856dc9104bea970e84cda87:
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding (2014-03-31 08:02:16 -0300)
----------------------------------------------------------------
Alexander Shiyan (1):
[media] stb6100: fix buffer length check in stb6100_write_reg_range()
Alexey Khoroshilov (1):
[media] adv7180: free an interrupt on failure paths in init_device()
Amit Grover (2):
[media] v4l2: Add settings for Horizontal and Vertical MV Search Range
[media] s5p-mfc: Add Horizontal and Vertical MV Search Range
Andy Shevchenko (3):
[media] lm3560: remove FSF address from the license
[media] lm3560: keep style for the comments
[media] lm3560: prevent memory leak in case of pdata absence
Antonio Ospite (2):
[media] gspca_kinect: fix kinect_read() error path
[media] gspca_kinect: fix messages about kinect_read() return value
Antti Palosaari (75):
[media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
[media] tda10071: do not check tuner PLL lock on read_status()
[media] tda10071: coding style issues
[media] af9035: use default i2c slave address for af9035 too
[media] devices.txt: add video4linux device for Software Defined Radio
[media] v4l: add device type for Software Defined Radio
[media] v4l: add new tuner types for SDR
[media] v4l: 1 Hz resolution flag for tuners
[media] v4l: add stream format for SDR receiver
[media] v4l: define own IOCTL ops for SDR FMT
[media] v4l: enable some IOCTLs for SDR receiver
[media] v4l: add device capability flag for SDR receiver
[media] DocBook: document 1 Hz flag
[media] DocBook: Software Defined Radio Interface
[media] DocBook: mark SDR API as Experimental
[media] v4l2-framework.txt: add SDR device type
[media] xc2028: silence compiler warnings
[media] rtl28xxu: add module parameter to disable IR
[media] rtl2832: remove unused if_dvbt config parameter
[media] rtl2832: style changes and minor cleanup
[media] rtl2832: provide muxed I2C adapter
[media] rtl2832: add muxed I2C adapter for demod itself
[media] rtl2832: implement delayed I2C gate close
[media] DocBook: media: document V4L2_CTRL_CLASS_RF_TUNER
[media] DocBook: document RF tuner gain controls
[media] v4l: add RF tuner gain controls
[media] m88ds3103: remove dead code
[media] m88ds3103: remove dead code 2nd part
[media] m88ds3103: possible uninitialized scalar variable
[media] DocBook: document RF tuner bandwidth controls
[media] v4l: define unit for V4L2_CID_RF_TUNER_BANDWIDTH
[media] v4l: add RF tuner channel bandwidth control
[media] v4l: reorganize RF tuner control ID numbers
[media] DocBook: media: add some general info about RF tuners
[media] DocBook: V4L: add V4L2_SDR_FMT_CU8 - 'CU08'
[media] DocBook: V4L: add V4L2_SDR_FMT_CU16LE - 'CU16'
[media] v4l: uapi: add SDR formats CU8 and CU16LE
[media] v4l: add enum_freq_bands support to tuner sub-device
[media] DocBook: media: document PLL lock control
[media] v4l: add control for RF tuner PLL lock flag
[media] msi3101: convert to SDR API
[media] msi001: Mirics MSi001 silicon tuner driver
[media] msi3101: use msi001 tuner driver
[media] MAINTAINERS: add msi001 driver
[media] MAINTAINERS: add msi3101 driver
[media] msi3101: clamp mmap buffers to reasonable level
[media] msi001: fix v4l2-compliance issues
[media] msi3101: fix v4l2-compliance issues
[media] v4l: rename v4l2_format_sdr to v4l2_sdr_format
[media] e4000: convert DVB tuner to I2C driver model
[media] e4000: implement controls via v4l2 control framework
[media] e4000: fix PLL calc to allow higher frequencies
[media] e4000: implement PLL lock v4l control
[media] rtl2832_sdr: Realtek RTL2832 SDR driver module
[media] rtl2832_sdr: expose e4000 controls to user
[media] rtl28xxu: constify demod config structs
[media] rtl28xxu: attach SDR extension module
[media] rtl28xxu: fix switch-case style issue
[media] rtl28xxu: depends on I2C_MUX
[media] rtl28xxu: use muxed RTL2832 I2C adapters for E4000 and RTL2832_SDR
[media] e4000: get rid of DVB i2c_gate_ctrl()
[media] e4000: convert to Regmap API
[media] e4000: rename some variables
[media] rtl2832_sdr: clamp bandwidth to nearest legal value in automode
[media] MAINTAINERS: add rtl2832_sdr driver
[media] e4000: fix 32-bit build error
[media] rtl2832_sdr: do not use dynamic stack allocation
[media] af9033: implement PID filter
[media] af9035: use af9033 PID filters
[media] e4000: make VIDEO_V4L2 dependency optional
[media] m88ds3103: fix bug on .set_tone()
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
[media] em28xx: fix PCTV 290e LNA oops
[media] em28xx-dvb: fix PCTV 461e tuner I2C binding
Antti Seppälä (2):
[media] nuvoton-cir: Don't touch PS/2 interrupts while initializing
[media] nuvoton-cir: Activate PNP device when probing
Arnd Bergmann (3):
[media] omap_vout: avoid sleep_on race
[media] arv: fix sleep_on race
[media] Sensoray 2255 uses videobuf2
Dan Carpenter (6):
[media] tda10071: remove a duplicative test
[media] gspca_stv06xx: remove an unneeded check
[media] stv0900: remove an unneeded check
[media] em28xx-cards: remove a wrong indent level
[media] av7110_hw: fix a sanity check in av7110_fw_cmd()
[media] ddbridge: remove unneeded an NULL check
Daniel Jeong (3):
[media] controls.xml: Document addtional Flash fault bits
[media] v4l2-controls.h: Add addtional Flash fault bits
[media] lm3646: add new dual LED Flash driver
Dave Jones (1):
[media] drx-d: add missing braces in drxd_hard.c:DRXD_init
Dean Anderson (7):
[media] s2255drv: removal of s2255_dmaqueue structure
[media] s2255drv: refactoring s2255_channel to s2255_vc
[media] s2255drv: buffer setup fix
[media] s2255drv: remove redundant parameter
[media] s2255drv: dynamic memory allocation efficiency fix
[media] s2255drv: fix for return code not checked
[media] s2255drv: cleanup of s2255_fh
Devin Heitmueller (3):
[media] au0828: rework GPIO management for HVR-950q
[media] drx-j: add a driver for Trident drx-j frontend
[media] drx-j: put under 3-clause BSD license
Edgar Thier (1):
[media] uvcvideo: Add bayer 8-bit patterns to uvcvideo
Federico Simoncelli (1):
[media] usbtv: split core and video implementation
Fengguang Wu (4):
[media] em28xx-cards: em28xx_devused can be static
[media] rc-core: ir_core_dev_number can be static
[media] drx-j: drxj_default_aud_data_g can be static
[media] drivers/media/usb/usbtv/usbtv-core.c:119:22: sparse: symbol 'usbtv_id_table' was not declared. Should it be static?
Florian Vaussard (1):
[media] omap3isp: preview: Fix the crop margins
Frank Schaefer (7):
[media] em28xx-audio: fix user counting in snd_em28xx_capture_open()
[media] em28xx-video: do not unregister the v4l2 dummy clock before v4l2_device_unregister() has been called
[media] em28xx-camera: fix return value checks on sensor probing
[media] em28xx-v4l: do not call em28xx_init_camera() if the device has no sensor
[media] em28xx-i2c: fix the i2c error description strings for -ENXIO
[media] em28xx-i2c: fix the error code for unknown errors
[media] em28xx-audio: make sure audio is unmuted on open()
Geert Uytterhoeven (1):
[media] v4l: VIDEO_SH_VOU should depend on HAS_DMA
Georgi Chorbadzhiyski (1):
[media] FE_READ_SNR and FE_READ_SIGNAL_STRENGTH docs
Gianluca Gennari (1):
[media] drx39xyj: fix 64 bit division on 32 bit arch
Guennadi Liakhovetski (1):
[media] MAINTAINERS: remove myself as a maintainer of VEU and VOU V4L2 drivers
Hans Verkuil (64):
[media] usbtv: fix compiler error due to missing module.h
[media] usbvision: drop unused define USBVISION_SAY_AND_WAIT
[media] s3c-camif: Remove use of deprecated V4L2_CTRL_FLAG_DISABLED
[media] v4l2-dv-timings.h: add new 4K DMT resolutions
[media] v4l2-dv-timings: mention missing 'reduced blanking V2'
[media] DocBook media: fix email addresses
[media] DocBook media: update copyright years and Introduction
[media] DocBook media: Cleanup some sections at common.xml
[media] DocBook media: update three sections of common.xml
[media] DocBook media: drop the old incorrect packed RGB table
[media] DocBook media: add revision entry for 3.15
[media] DocBook: partial rewrite of "Opening and Closing Devices"
[media] radio-usb-si4713: make array of structs const
[media] v4l2-subdev: Allow 32-bit compat ioctls
[media] vivi: fix sequence counting
[media] vivi: drop unused field
[media] vivi: queue_setup improvements
[media] radio-cadet: avoid interruptible_sleep_on race
[media] v4l: do not allow modulator ioctls for non-radio devices
[media] vb2: fix timecode and flags handling for output buffers
[media] vb2: fix read/write regression
[media] vb2: fix PREPARE_BUF regression
[media] vb2: add debugging code to check for unbalanced ops
[media] vb2: change result code of buf_finish to void
[media] pwc: do not decompress the image unless the state is DONE
[media] vb2: call buf_finish from __queue_cancel
[media] vb2: consistent usage of periods in videobuf2-core.h
[media] vb2: fix buf_init/buf_cleanup call sequences
[media] vb2: rename queued_count to owned_by_drv_count
[media] vb2: don't init the list if there are still buffers
[media] vb2: only call start_streaming if sufficient buffers are queued
[media] vb2: properly clean up PREPARED and QUEUED buffers
[media] vb2: replace BUG by WARN_ON
[media] vb2: fix streamoff handling if streamon wasn't called
[media] vb2: call buf_finish after the state check
[media] vivi: correctly cleanup after a start_streaming failure
[media] vivi: fix ENUM_FRAMEINTERVALS implementation
[media] v4l2-ctrls: replace BUG_ON by WARN_ON
[media] media DocBook: fix NV16M description
[media] v4l2-compat-ioctl32: fix wrong VIDIOC_SUBDEV_G/S_EDID32 support
[media] v4l2: allow v4l2_subdev_edid to be used with video nodes
[media] v4l2: add VIDIOC_G/S_EDID support to the v4l2 core
[media] adv*: replace the deprecated v4l2_subdev_edid by v4l2_edid
[media] DocBook v4l2: update the G/S_EDID documentation
[media] mem2mem_testdev: use 40ms default transfer time
[media] mem2mem_testdev: pick default format with try_fmt
[media] mem2mem_testdev: set priv to 0
[media] mem2mem_testdev: add USERPTR support
[media] mem2mem_testdev: return pending buffers in stop_streaming()
[media] mem2mem_testdev: fix field, sequence and time copying
[media] mem2mem_testdev: improve field handling
[media] DocBook media: update STREAMON/OFF documentation
[media] DocBook: fix incorrect code example
[media] DocBook media: clarify v4l2_buffer/plane fields
[media] DocBook media: fix broken FIELD_ALTERNATE description
[media] rtl2832_sdr: fixing v4l2-compliance issues
[media] v4l2-pci-skeleton: add a V4L2 PCI skeleton driver
[media] DocBook media: clarify v4l2_pix_format and v4l2_pix_format_mplane fields
[media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
[media] si4713: fix Kconfig dependencies
[media] saa6752hs: depends on CRC32
[media] videodev2.h: add parenthesis around macro arguments
[media] v4l2-dv-timings: add module name, description, license
[media] saa7134: fix WARN_ON during resume
Hans de Goede (1):
[media] gspca_topro: Add a couple of missing length check in the packet parsing code
Heinrich Schuchardt (1):
[media] ds3000: fix reading array out of bound in ds3000_read_snr
James Hogan (27):
[media] media: rc: only turn on LED if keypress generated
[media] media: rc: document rc class sysfs API
[media] media: rc: add Sharp infrared protocol
[media] media: rc: add raw decoder for Sharp protocol
[media] rc: ir-raw: Load ir-sharp-decoder module at init
[media] media: rc: add sysfs scancode filtering interface
[media] media: rc: change 32bit NEC scancode format
[media] rc-main: store_filter: pass errors to userland
[media] rc-main: add generic scancode filtering
[media] rc: abstract access to allowed/enabled protocols
[media] rc: add allowed/enabled wakeup protocol masks
[media] rc: add wakeup_protocols sysfs file
[media] rc-main: automatically refresh filter on protocol change
[media] dt: binding: add binding for ImgTec IR block
[media] rc: img-ir: add base driver
[media] rc: img-ir: add raw driver
[media] rc: img-ir: add hardware decoder driver
[media] rc: img-ir: add to build
[media] rc: img-ir: add NEC decoder module
[media] rc: img-ir: add JVC decoder module
[media] rc: img-ir: add Sony decoder module
[media] rc: img-ir: add Sharp decoder module
[media] rc: img-ir: add Sanyo decoder module
[media] rc-main: fix missing unlock if no devno left
[media] rc: img-ir: hw: Remove unnecessary semi-colon
[media] rc: img-ir: jvc: Remove unused no-leader timings
[media] rc: img-ir: hw: Fix min/max bits setup
Jan Vcelak (3):
[media] rtl28xxu: add USB ID for Genius TVGo DVB-T03
[media] rtl28xxu: add chipset version comments into device list
[media] rtl28xxu: add USB ID for Genius TVGo DVB-T03
Joakim Hernberg (1):
[media] cx23885: Fix tuning regression for TeVii S471
Jon Mason (1):
[media] staging/dt3155v4l: use PCI_VENDOR_ID_INTEL
Joonyoung Shim (2):
[media] s5p-mfc: Replaced commas with semicolons
[media] au0828: fix i2c clock speed for DViCO FusionHDTV7
Kees Cook (1):
[media] media: rc-core: use %s in rc_map_get() module load
Lad, Prabhakar (6):
[media] mt9p031: Check return value of clk_prepare_enable/clk_set_rate
[media] mt9v032: Check return value of clk_prepare_enable/clk_set_rate
[media] omap3isp: Fix typos
[media] omap3isp: ispccdc: Remove unwanted comments
[media] omap3isp: Rename the variable names in description
[media] media: davinci: vpbe: fix build warning
Lars-Peter Clausen (7):
[media] adv7180: Fix remove order
[media] adv7180: Free control handler on remove()
[media] adv7180: Remove unnecessary v4l2_device_unregister_subdev() from probe error path
[media] adv7180: Remove duplicated probe error message
[media] adv7180: Use threaded IRQ instead of IRQ + workqueue
[media] adv7180: Add support for async device registration
[media] adv7180: Add support for power down
Laurent Pinchart (12):
[media] omap3isp: Don't try to locate external subdev for mem-to-mem pipelines
[media] omap3isp: Don't ignore failure to locate external subdev
[media] ARM: omap2: cm-t35: Add regulators and clock for camera sensor
[media] mt9t001: Add regulator support
[media] mt9t001: Add clock support
[media] mt9p031: Fix typo in comment
[media] mt9p031: Add support for PLL bypass
[media] uvcvideo: Remove duplicate check for number of buffers in queue_setup
[media] uvcvideo: Support allocating buffers larger than the current frame size
[media] v4l: of: Support empty port nodes
[media] omap_vout: Add DVI display type support
[media] v4l: vsp1: Update copyright notice
Levente Kurusa (1):
[media] staging: davinci_vpfe: fix error check
Luis Alves (1):
[media] rtl2832: Fix deadlock on i2c mux select function
Malcolm Priestley (9):
[media] af9035: Move it913x single devices to af9035
[media] af9035: add default 0x9135 slave I2C address
[media] af9035: Add remaining it913x dual ids to af9035
[media] it913x: dead code Remove driver
[media] it913x-fe: Dead code remove driver
[media] MAINTAINERS: Remove it913x* maintainers entries
[media] get_dvb_firmware: it913x: Remove it9137 firmware files
[media] m88rs2000: add caps FE_CAN_INVERSION_AUTO
[media] m88rs2000: prevent frontend crash on continuous transponder scans
Marcus Folkesson (1):
[media] media: i2c: Kconfig: create dependency to MEDIA_CONTROLLER for adv7*
Martin Bugge (7):
[media] adv7842: adjust gain and offset for DVI-D signals
[media] adv7842: pixelclock read-out
[media] adv7842: log-status for Audio Video Info frames (AVI)
[media] adv7842: platform-data for Hotplug Active (HPA) manual/auto
[media] ths8200: Zero blanking level for RGB
[media] ths8200: Corrected sync polarities setting
[media] ths8200: Format adjustment
Masanari Iida (1):
[media] DocBook: Fix typo in xml and template file
Mauro Carvalho Chehab (112):
[media] DocBook/media_api: Better organize the DocBook
[media] DocBook: Add a description for the Remote Controller interface
[media, edac] Change my email address
[media] em28xx_dvb: only call the software filter if data
[media] em28xx: Display the used DVB alternate
[media] dvb_frontend: better handle lna set errors
[media] DocBook: document DVB DMX_[ADD|REMOVE]_PID
[media] drx-j: CodingStyle fixes
[media] drx-j: Fix compilation and un-comment it
[media] drx-j: Fix CodingStyle
[media] drx-j: get rid of the typedefs on bsp_i2c.h
[media] drx-j: remove the "const" annotate on HICommand()
[media] drx-j: get rid of the integer typedefs
[media] drx-j: get rid of the other typedefs at bsp_types.h
[media] drx-j: get rid of the bsp*.h headers
[media] drx-j: get rid of most of the typedefs
[media] drx-j: fix whitespacing on pointer parmameters
[media] drx-j: Use checkpatch --fix to solve several issues
[media] drx-j: Don't use CamelCase
[media] drx-j: do more CodingStyle fixes
[media] drx-j: remove the unused tuner_i2c_write_read() function
[media] drx-j: Remove a bunch of unused but assigned vars
[media] drx-j: Some minor CodingStyle fixes at headers
[media] drx-j: make a few functions static
[media] drx-j: Get rid of drx39xyj/bsp_tuner.h
[media] drx-j: get rid of typedefs in drx_driver.h
[media] drx-j: Get rid of typedefs on drxh.h
[media] drx-j: a few more CodingStyle fixups
[media] drx-j: Don't use buffer if an error occurs
[media] drx-j: replace the ugly CHK_ERROR() macro
[media] drx-j: don't use parenthesis on return
[media] drx-j: Simplify logic expressions
[media] drx-j: More CamelCase fixups
[media] drx-j: Remove typedefs in drxj.c
[media] drx-j: CodingStyle fixups on drxj.c
[media] drx-j: Use the Linux error codes
[media] drx-j: Replace printk's by pr_foo()
[media] drx-j: get rid of some ugly macros
[media] drx-j: remove typedefs at drx_driver.c
[media] drx-j: remove drxj_options.h
[media] drx-j: make checkpatch.pl happy
[media] drx-j: remove the useless microcode_size
[media] drx-j: Fix release and error path on drx39xxj.c
[media] drx-j: Be sure that all allocated data are properly initialized
[media] drx-j: dynamically load the firmware
[media] drx-j: Split firmware size check from the main routine
[media] em28xx: add support for PCTV 80e remote controller
[media] drx-j: remove unused code from drx_driver.c
[media] drx-j: get rid of its own be??_to_cpu() implementation
[media] drx-j: reset the DVB scan configuration at powerup
[media] drx-j: Allow standard selection
[media] drx-j: Some cleanups at drx_driver.c source
[media] drx-j: prepend function names with drx_ at drx_driver.c
[media] drx-j: get rid of drx_driver.c
[media] drx-j: Avoid any regressions by preserving old behavior
[media] drx-j: Remove duplicated firmware upload code
[media] drx-j: get rid of drx_ctrl
[media] drx-j: get rid of the remaining drx generic functions
[media] drx-j: move drx39xxj into drxj.c
[media] drx-j: get rid of drxj_ctrl()
[media] drx-j: comment or remove unused code
[media] drx-j: remove some ugly bindings from drx39xxj_dummy.c
[media] drx-j: get rid of tuner dummy get/set frequency
[media] drx-j: be sure to use tuner's IF
[media] drx-j: avoid calling power_down_foo twice
[media] drx-j: call ctrl_set_standard even if a standard is powered
[media] drx-j: use the proper timeout code on scu_command
[media] drx-j: remove some unused data
[media] drx-j: Fix qam/256 mode
[media] drx-j: Get rid of I2C protocol version
[media] drx-j: get rid of function prototypes at drx_dap_fasi.c
[media] drx-j: get rid of drx_dap_fasi.c
[media] drx-j: get rid of struct drx_dap_fasi_funct_g
[media] drx-j: get rid of function wrappers
[media] drx-j: Allow userspace control of LNA
[media] drx-j: Use single master mode
[media] drx-j: be sure to send the powerup command at device open
[media] drx-j: be sure to do a full software reset
[media] drx-j: disable OOB
[media] drx-j: Properly initialize mpeg struct before using it
[media] drx-j: set it to serial mode by default
[media] em28xx: update CARDLIST.em28xx
[media] Update CARDLIST.cx23885
[media] tda18212: add support for ATSC and clearQAM on tda18272
[media] em28xx: add support for Kworld UB435-Q version 3
[media] em28xx: add support for DVB monitor led
[media] em28xx: Add LED support for Kworld UB435-Q v3
[media] DocBook: add Antti at the V4L2 revision list
[media] DocBook: Fix a breakage at controls.xml
Merge tag 'v3.14-rc5' into patchwork
[media] em28xx: only enable PCTV 80e led when streaming
[media] em28xx: Only deallocate struct em28xx after finishing all extensions
[media] em28xx-dvb: remove one level of identation at fini callback
[media] drx-j: Don't use 0 as NULL
[media] drx-j: Fix dubious usage of "&" instead of "&&"
[media] drx39xxj.h: Fix undefined reference to attach function
[media] drx-j: don't use mc_info before checking if its not NULL
[media] drx-j: get rid of dead code
[media] drx-j: remove external symbols
[media] drx-j: Fix usage of drxj_close()
[media] drx-j: propagate returned error from request_firmware()
[media] drx-j: get rid of some unused vars
[media] drx-j: Don't use "state" for DVB lock state
[media] drx-j: re-add get_sig_strength()
[media] drx-j: Prepare to use DVBv5 stats
[media] drx-j: properly handle bit counts on stats
[media] drx-j: Fix detection of no signal
[media] drx-j: enable DVBv5 stats
drx-j: use ber_count var
drx-j: Fix post-BER calculus on QAM modulation
[media] af9033: Don't export functions for the hardware filter
Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
Michael Opdenacker (1):
[media] davinci: vpfe: remove deprecated IRQF_DISABLED
Ole Ernst (1):
[media] dvb_frontend: Fix possible read out of bounds
Oleksij Rempel (1):
[media] uvcvideo: Do not use usb_set_interface on bulk EP
Oliver Neukum (1):
[media] uvcvideo: Simplify redundant check
Peter Meerwald (1):
[media] omap3isp: Fix kerneldoc for _module_sync_is_stopping and isp_isr()
Phil Edworthy (1):
[media] media: soc_camera: rcar_vin: Add support for 10-bit YUV cameras
Philipp Zabel (3):
[media] uvcvideo: Enable VIDIOC_CREATE_BUFS
[media] tvp5150: Fix type mismatch warning in clamp macro
[media] tvp5150: Make debug module parameter visible in sysfs
Pojar George (1):
[media] bttv: Add support for Kworld V-Stream Xpert TV PVR878
Ricardo Ribalda Delgado (1):
[media] vb2: Check if there are buffers before streamon
Sachin Kamat (1):
[media] radio-keene: Use module_usb_driver
Sakari Ailus (10):
[media] v4l: Document timestamp behaviour to correspond to reality
[media] v4l: Use full 32 bits for buffer flags
[media] v4l: Rename vb2_queue.timestamp_type as timestamp_flags
[media] v4l: Timestamp flags will soon contain timestamp source, not just type
[media] v4l: Add timestamp source flags, mask and document them
[media] v4l: Handle buffer timestamp flags correctly
[media] uvcvideo: Tell the user space we're using start-of-exposure timestamps
[media] exynos-gsc, m2m-deinterlace, mx2_emmaprp: Copy v4l2_buffer data from src to dst
[media] v4l: Copy timestamp source flags to destination on m2m devices
[media] v4l: Document timestamp buffer flag behaviour
Satoshi Nagahama (1):
[media] Siano: smsusb - Add a device id for PX-S1UD
Sean Young (3):
[media] iguanair: explain tx carrier setup
[media] iguanair: simplify tx loop
[media] mceusb: improve error logging
Seung-Woo Kim (1):
[media] s5p-mfc: remove meaningless memory bank assignment
Shuah Khan (9):
[media] em28xx: add suspend/resume to em28xx_ops
[media] em28xx-audio: implement em28xx_ops: suspend/resume hooks
[media] em28xx-dvb: implement em28xx_ops: suspend/resume hooks
[media] em28xx-input: implement em28xx_ops: suspend/resume hooks
[media] em28xx-video: implement em28xx_ops: suspend/resume hooks
[media] em28xx: implement em28xx_usb_driver suspend, resume, reset_resume hooks
[media] drx-j: fix pr_dbg undefined compile errors when DJH_DEBUG is defined
[media] drx-j: remove return that prevents DJH_DEBUG code to run
[media] drx-j: fix boot failure due to null pointer dereference
Thomas Pugliese (1):
[media] uvcvideo: Update uvc_endpoint_max_bpi to handle USB_SPEED_WIRELESS devices
Till Dörges (1):
[media] rtl28xxu: add ID [0ccd:00b4] TerraTec NOXON DAB Stick (rev 3)
Wolfram Sang (1):
[media] media: gspca: sn9c20x: add ID for Genius Look 1320 V2
sensoray-dev (3):
[media] s2255drv: checkpatch fix: coding style fix
[media] s2255drv: upgrade to videobuf2
[media] s2255drv: memory leak fix
CREDITS | 7 +
Documentation/ABI/testing/sysfs-class-rc | 111 +
Documentation/DocBook/media/dvb/demux.xml | 23 +-
Documentation/DocBook/media/dvb/dvbapi.xml | 4 +-
Documentation/DocBook/media/dvb/dvbproperty.xml | 2 +-
Documentation/DocBook/media/dvb/frontend.xml | 8 +-
Documentation/DocBook/media/v4l/common.xml | 412 +-
Documentation/DocBook/media/v4l/compat.xml | 15 +-
Documentation/DocBook/media/v4l/controls.xml | 176 +
Documentation/DocBook/media/v4l/dev-osd.xml | 22 +-
Documentation/DocBook/media/v4l/dev-sdr.xml | 110 +
Documentation/DocBook/media/v4l/io.xml | 189 +-
Documentation/DocBook/media/v4l/pixfmt-nv16m.xml | 9 +-
.../DocBook/media/v4l/pixfmt-packed-rgb.xml | 513 +-
.../DocBook/media/v4l/pixfmt-sdr-cu08.xml | 44 +
.../DocBook/media/v4l/pixfmt-sdr-cu16le.xml | 46 +
Documentation/DocBook/media/v4l/pixfmt.xml | 34 +-
.../DocBook/media/v4l/remote_controllers.xml | 143 +
Documentation/DocBook/media/v4l/v4l2.xml | 26 +-
.../DocBook/media/v4l/vidioc-enum-freq-bands.xml | 8 +-
...{vidioc-subdev-g-edid.xml => vidioc-g-edid.xml} | 36 +-
.../DocBook/media/v4l/vidioc-g-ext-ctrls.xml | 7 +-
Documentation/DocBook/media/v4l/vidioc-g-fmt.xml | 7 +
.../DocBook/media/v4l/vidioc-g-frequency.xml | 5 +-
.../DocBook/media/v4l/vidioc-g-modulator.xml | 6 +-
Documentation/DocBook/media/v4l/vidioc-g-tuner.xml | 15 +-
.../DocBook/media/v4l/vidioc-querycap.xml | 6 +
.../DocBook/media/v4l/vidioc-s-hw-freq-seek.xml | 8 +-
.../DocBook/media/v4l/vidioc-streamon.xml | 28 +-
Documentation/DocBook/media_api.tmpl | 90 +-
Documentation/devices.txt | 7 +
.../devicetree/bindings/media/img-ir-rev1.txt | 34 +
Documentation/dvb/get_dvb_firmware | 22 +-
Documentation/dvb/it9137.txt | 9 -
Documentation/edac.txt | 2 +-
Documentation/video4linux/CARDLIST.bttv | 1 +
Documentation/video4linux/CARDLIST.cx23885 | 5 +-
Documentation/video4linux/CARDLIST.em28xx | 6 +
Documentation/video4linux/gspca.txt | 1 +
Documentation/video4linux/v4l2-framework.txt | 5 +
Documentation/video4linux/v4l2-pci-skeleton.c | 913 ++
MAINTAINERS | 52 +-
arch/arm/mach-omap2/board-cm-t35.c | 16 +
drivers/edac/edac_mc_sysfs.c | 2 +-
drivers/edac/ghes_edac.c | 2 +-
drivers/edac/i5400_edac.c | 4 +-
drivers/edac/i7300_edac.c | 4 +-
drivers/edac/i7core_edac.c | 4 +-
drivers/edac/sb_edac.c | 4 +-
drivers/hid/hid-picolcd_cir.c | 2 +-
drivers/media/common/siano/smsdvb-debugfs.c | 2 +-
drivers/media/common/siano/smsir.c | 2 +-
drivers/media/dvb-core/dvb-usb-ids.h | 1 +
drivers/media/dvb-core/dvb_frontend.c | 10 +-
drivers/media/dvb-frontends/Kconfig | 12 +-
drivers/media/dvb-frontends/Makefile | 2 +-
drivers/media/dvb-frontends/af9033.c | 59 +-
drivers/media/dvb-frontends/af9033.h | 34 +-
drivers/media/dvb-frontends/drx39xyj/Kconfig | 7 +
drivers/media/dvb-frontends/drx39xyj/Makefile | 6 +
drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h | 139 +
drivers/media/dvb-frontends/drx39xyj/drx39xxj.h | 45 +
.../media/dvb-frontends/drx39xyj/drx_dap_fasi.h | 256 +
drivers/media/dvb-frontends/drx39xyj/drx_driver.h | 2343 +++
.../dvb-frontends/drx39xyj/drx_driver_version.h | 72 +
drivers/media/dvb-frontends/drx39xyj/drxj.c | 12400 +++++++++++++++
drivers/media/dvb-frontends/drx39xyj/drxj.h | 650 +
drivers/media/dvb-frontends/drx39xyj/drxj_map.h | 15055 +++++++++++++++++++
drivers/media/dvb-frontends/drxd_hard.c | 4 +-
drivers/media/dvb-frontends/ds3000.c | 2 +-
drivers/media/dvb-frontends/it913x-fe-priv.h | 1051 --
drivers/media/dvb-frontends/it913x-fe.c | 1045 --
drivers/media/dvb-frontends/it913x-fe.h | 237 -
drivers/media/dvb-frontends/m88ds3103.c | 30 +-
drivers/media/dvb-frontends/m88rs2000.c | 19 +-
drivers/media/dvb-frontends/mb86a20s.c | 4 +-
drivers/media/dvb-frontends/mb86a20s.h | 2 +-
drivers/media/dvb-frontends/rtl2832.c | 191 +-
drivers/media/dvb-frontends/rtl2832.h | 34 +-
drivers/media/dvb-frontends/rtl2832_priv.h | 54 +-
drivers/media/dvb-frontends/s921.c | 4 +-
drivers/media/dvb-frontends/s921.h | 2 +-
drivers/media/dvb-frontends/stb6100.c | 2 +-
drivers/media/dvb-frontends/stv0900_sw.c | 2 +-
drivers/media/dvb-frontends/tda10071.c | 68 +-
drivers/media/dvb-frontends/tda10071.h | 2 +-
drivers/media/i2c/Kconfig | 16 +-
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/ad9389b.c | 2 +-
drivers/media/i2c/adv7180.c | 118 +-
drivers/media/i2c/adv7511.c | 2 +-
drivers/media/i2c/adv7604.c | 4 +-
drivers/media/i2c/adv7842.c | 153 +-
drivers/media/i2c/ir-kbd-i2c.c | 4 +-
drivers/media/i2c/lm3560.c | 22 +-
drivers/media/i2c/lm3646.c | 414 +
drivers/media/i2c/mt9p031.c | 49 +-
drivers/media/i2c/mt9t001.c | 229 +-
drivers/media/i2c/mt9v011.c | 4 +-
drivers/media/i2c/mt9v032.c | 10 +-
drivers/media/i2c/sr030pc30.c | 2 +-
drivers/media/i2c/ths8200.c | 26 +-
drivers/media/i2c/tvp5150.c | 8 +-
drivers/media/parport/bw-qcam.c | 8 +-
drivers/media/pci/bt8xx/bttv-cards.c | 17 +-
drivers/media/pci/bt8xx/bttv-input.c | 1 +
drivers/media/pci/bt8xx/bttv.h | 1 +
drivers/media/pci/cx23885/cx23885-dvb.c | 1 +
drivers/media/pci/cx23885/cx23885-input.c | 2 +-
drivers/media/pci/cx88/cx88-input.c | 2 +-
drivers/media/pci/ddbridge/ddbridge-core.c | 6 +-
drivers/media/pci/saa7134/saa7134-cards.c | 4 +-
drivers/media/pci/sta2x11/sta2x11_vip.c | 7 +-
drivers/media/pci/ttpci/av7110_hw.c | 2 +-
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/arv.c | 6 +-
drivers/media/platform/blackfin/bfin_capture.c | 2 +-
drivers/media/platform/coda.c | 7 +-
drivers/media/platform/davinci/vpbe_display.c | 9 +-
drivers/media/platform/davinci/vpif_capture.c | 9 +-
drivers/media/platform/davinci/vpif_display.c | 9 +-
drivers/media/platform/exynos-gsc/gsc-m2m.c | 12 +-
drivers/media/platform/exynos4-is/fimc-capture.c | 2 +-
drivers/media/platform/exynos4-is/fimc-lite.c | 2 +-
drivers/media/platform/exynos4-is/fimc-m2m.c | 7 +-
drivers/media/platform/m2m-deinterlace.c | 11 +-
drivers/media/platform/marvell-ccic/mcam-core.c | 3 +-
drivers/media/platform/mem2mem_testdev.c | 95 +-
drivers/media/platform/mx2_emmaprp.c | 13 +-
drivers/media/platform/omap/omap_vout.c | 1 +
drivers/media/platform/omap/omap_vout_vrfb.c | 3 +-
drivers/media/platform/omap3isp/isp.c | 7 +-
drivers/media/platform/omap3isp/isp.h | 12 +-
drivers/media/platform/omap3isp/ispccdc.c | 10 +-
drivers/media/platform/omap3isp/ispccdc.h | 6 -
drivers/media/platform/omap3isp/ispccp2.c | 6 +-
drivers/media/platform/omap3isp/isphist.c | 4 +-
drivers/media/platform/omap3isp/isppreview.c | 22 +-
drivers/media/platform/omap3isp/ispqueue.c | 2 +-
drivers/media/platform/omap3isp/ispresizer.c | 6 +-
drivers/media/platform/omap3isp/ispresizer.h | 4 +-
drivers/media/platform/omap3isp/ispstat.c | 4 +-
drivers/media/platform/omap3isp/ispvideo.c | 12 +-
drivers/media/platform/s3c-camif/camif-capture.c | 17 +-
drivers/media/platform/s5p-g2d/g2d.c | 7 +-
drivers/media/platform/s5p-jpeg/jpeg-core.c | 7 +-
drivers/media/platform/s5p-mfc/regs-mfc-v6.h | 1 +
drivers/media/platform/s5p-mfc/s5p_mfc.c | 17 +-
drivers/media/platform/s5p-mfc/s5p_mfc_common.h | 2 +
drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 2 -
drivers/media/platform/s5p-mfc/s5p_mfc_enc.c | 24 +
drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c | 8 +-
drivers/media/platform/s5p-tv/mixer_video.c | 6 +-
drivers/media/platform/soc_camera/atmel-isi.c | 2 +-
drivers/media/platform/soc_camera/mx2_camera.c | 2 +-
drivers/media/platform/soc_camera/mx3_camera.c | 2 +-
drivers/media/platform/soc_camera/rcar_vin.c | 11 +-
.../platform/soc_camera/sh_mobile_ceu_camera.c | 2 +-
drivers/media/platform/ti-vpe/vpe.c | 6 +-
drivers/media/platform/vivi.c | 54 +-
drivers/media/platform/vsp1/vsp1.h | 2 +-
drivers/media/platform/vsp1/vsp1_drv.c | 2 +-
drivers/media/platform/vsp1/vsp1_entity.c | 2 +-
drivers/media/platform/vsp1/vsp1_entity.h | 2 +-
drivers/media/platform/vsp1/vsp1_lif.c | 2 +-
drivers/media/platform/vsp1/vsp1_lif.h | 2 +-
drivers/media/platform/vsp1/vsp1_rpf.c | 2 +-
drivers/media/platform/vsp1/vsp1_rwpf.c | 2 +-
drivers/media/platform/vsp1/vsp1_rwpf.h | 2 +-
drivers/media/platform/vsp1/vsp1_uds.c | 2 +-
drivers/media/platform/vsp1/vsp1_uds.h | 2 +-
drivers/media/platform/vsp1/vsp1_video.c | 4 +-
drivers/media/platform/vsp1/vsp1_video.h | 2 +-
drivers/media/platform/vsp1/vsp1_wpf.c | 2 +-
drivers/media/radio/radio-cadet.c | 46 +-
drivers/media/radio/radio-keene.c | 19 +-
drivers/media/radio/si4713/Kconfig | 6 +-
drivers/media/radio/si4713/radio-usb-si4713.c | 4 +-
drivers/media/rc/Kconfig | 11 +
drivers/media/rc/Makefile | 2 +
drivers/media/rc/ati_remote.c | 2 +-
drivers/media/rc/ene_ir.c | 2 +-
drivers/media/rc/fintek-cir.c | 2 +-
drivers/media/rc/gpio-ir-recv.c | 4 +-
drivers/media/rc/iguanair.c | 31 +-
drivers/media/rc/img-ir/Kconfig | 61 +
drivers/media/rc/img-ir/Makefile | 11 +
drivers/media/rc/img-ir/img-ir-core.c | 176 +
drivers/media/rc/img-ir/img-ir-hw.c | 1053 ++
drivers/media/rc/img-ir/img-ir-hw.h | 269 +
drivers/media/rc/img-ir/img-ir-jvc.c | 81 +
drivers/media/rc/img-ir/img-ir-nec.c | 148 +
drivers/media/rc/img-ir/img-ir-raw.c | 151 +
drivers/media/rc/img-ir/img-ir-raw.h | 60 +
drivers/media/rc/img-ir/img-ir-sanyo.c | 122 +
drivers/media/rc/img-ir/img-ir-sharp.c | 99 +
drivers/media/rc/img-ir/img-ir-sony.c | 145 +
drivers/media/rc/img-ir/img-ir.h | 166 +
drivers/media/rc/imon.c | 7 +-
drivers/media/rc/ir-jvc-decoder.c | 2 +-
drivers/media/rc/ir-lirc-codec.c | 2 +-
drivers/media/rc/ir-mce_kbd-decoder.c | 2 +-
drivers/media/rc/ir-nec-decoder.c | 11 +-
drivers/media/rc/ir-raw.c | 5 +-
drivers/media/rc/ir-rc5-decoder.c | 10 +-
drivers/media/rc/ir-rc5-sz-decoder.c | 4 +-
drivers/media/rc/ir-rc6-decoder.c | 6 +-
drivers/media/rc/ir-sanyo-decoder.c | 6 +-
drivers/media/rc/ir-sharp-decoder.c | 200 +
drivers/media/rc/ir-sony-decoder.c | 10 +-
drivers/media/rc/ite-cir.c | 2 +-
drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c | 4 +-
drivers/media/rc/keymaps/rc-apac-viewcomp.c | 4 +-
drivers/media/rc/keymaps/rc-asus-pc39.c | 4 +-
drivers/media/rc/keymaps/rc-asus-ps3-100.c | 4 +-
drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c | 4 +-
drivers/media/rc/keymaps/rc-avermedia-a16d.c | 4 +-
drivers/media/rc/keymaps/rc-avermedia-cardbus.c | 4 +-
drivers/media/rc/keymaps/rc-avermedia-dvbt.c | 4 +-
drivers/media/rc/keymaps/rc-avermedia-m135a.c | 4 +-
.../media/rc/keymaps/rc-avermedia-m733a-rm-k6.c | 2 +-
drivers/media/rc/keymaps/rc-avermedia.c | 4 +-
drivers/media/rc/keymaps/rc-avertv-303.c | 4 +-
drivers/media/rc/keymaps/rc-behold-columbus.c | 4 +-
drivers/media/rc/keymaps/rc-behold.c | 4 +-
drivers/media/rc/keymaps/rc-budget-ci-old.c | 4 +-
drivers/media/rc/keymaps/rc-cinergy-1400.c | 4 +-
drivers/media/rc/keymaps/rc-cinergy.c | 4 +-
drivers/media/rc/keymaps/rc-dib0700-nec.c | 4 +-
drivers/media/rc/keymaps/rc-dib0700-rc5.c | 4 +-
drivers/media/rc/keymaps/rc-dm1105-nec.c | 4 +-
drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c | 4 +-
drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c | 4 +-
drivers/media/rc/keymaps/rc-em-terratec.c | 4 +-
drivers/media/rc/keymaps/rc-encore-enltv-fm53.c | 4 +-
drivers/media/rc/keymaps/rc-encore-enltv.c | 4 +-
drivers/media/rc/keymaps/rc-encore-enltv2.c | 4 +-
drivers/media/rc/keymaps/rc-evga-indtube.c | 4 +-
drivers/media/rc/keymaps/rc-eztv.c | 4 +-
drivers/media/rc/keymaps/rc-flydvb.c | 4 +-
drivers/media/rc/keymaps/rc-flyvideo.c | 4 +-
drivers/media/rc/keymaps/rc-fusionhdtv-mce.c | 4 +-
drivers/media/rc/keymaps/rc-gadmei-rm008z.c | 4 +-
drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c | 4 +-
drivers/media/rc/keymaps/rc-gotview7135.c | 4 +-
drivers/media/rc/keymaps/rc-hauppauge.c | 4 +-
drivers/media/rc/keymaps/rc-iodata-bctv7e.c | 4 +-
drivers/media/rc/keymaps/rc-kaiomy.c | 4 +-
drivers/media/rc/keymaps/rc-kworld-315u.c | 4 +-
drivers/media/rc/keymaps/rc-kworld-pc150u.c | 2 +-
.../media/rc/keymaps/rc-kworld-plus-tv-analog.c | 4 +-
drivers/media/rc/keymaps/rc-manli.c | 4 +-
drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c | 4 +-
drivers/media/rc/keymaps/rc-msi-tvanywhere.c | 4 +-
drivers/media/rc/keymaps/rc-nebula.c | 4 +-
.../media/rc/keymaps/rc-nec-terratec-cinergy-xs.c | 6 +-
drivers/media/rc/keymaps/rc-norwood.c | 4 +-
drivers/media/rc/keymaps/rc-npgtech.c | 4 +-
drivers/media/rc/keymaps/rc-pctv-sedna.c | 4 +-
drivers/media/rc/keymaps/rc-pinnacle-color.c | 4 +-
drivers/media/rc/keymaps/rc-pinnacle-grey.c | 4 +-
drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c | 4 +-
drivers/media/rc/keymaps/rc-pixelview-002t.c | 4 +-
drivers/media/rc/keymaps/rc-pixelview-mk12.c | 4 +-
drivers/media/rc/keymaps/rc-pixelview-new.c | 4 +-
drivers/media/rc/keymaps/rc-pixelview.c | 4 +-
.../media/rc/keymaps/rc-powercolor-real-angel.c | 4 +-
drivers/media/rc/keymaps/rc-proteus-2309.c | 4 +-
drivers/media/rc/keymaps/rc-purpletv.c | 4 +-
drivers/media/rc/keymaps/rc-pv951.c | 4 +-
.../media/rc/keymaps/rc-real-audio-220-32-keys.c | 4 +-
drivers/media/rc/keymaps/rc-tbs-nec.c | 4 +-
drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c | 4 +-
drivers/media/rc/keymaps/rc-tevii-nec.c | 4 +-
drivers/media/rc/keymaps/rc-tivo.c | 86 +-
drivers/media/rc/keymaps/rc-tt-1500.c | 4 +-
drivers/media/rc/keymaps/rc-videomate-s350.c | 4 +-
drivers/media/rc/keymaps/rc-videomate-tv-pvr.c | 4 +-
drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c | 4 +-
drivers/media/rc/keymaps/rc-winfast.c | 4 +-
drivers/media/rc/mceusb.c | 184 +-
drivers/media/rc/nuvoton-cir.c | 12 +-
drivers/media/rc/nuvoton-cir.h | 1 -
drivers/media/rc/rc-core-priv.h | 15 +-
drivers/media/rc/rc-loopback.c | 2 +-
drivers/media/rc/rc-main.c | 253 +-
drivers/media/rc/redrat3.c | 2 +-
drivers/media/rc/st_rc.c | 2 +-
drivers/media/rc/streamzap.c | 2 +-
drivers/media/rc/ttusbir.c | 2 +-
drivers/media/rc/winbond-cir.c | 2 +-
drivers/media/tuners/Kconfig | 1 +
drivers/media/tuners/e4000.c | 608 +-
drivers/media/tuners/e4000.h | 21 +-
drivers/media/tuners/e4000_priv.h | 88 +-
drivers/media/tuners/mt2063.c | 4 +-
drivers/media/tuners/r820t.c | 4 +-
drivers/media/tuners/tda18212.c | 12 +
drivers/media/tuners/tda18212.h | 2 +
drivers/media/tuners/tuner-xc2028.c | 3 +
drivers/media/usb/au0828/au0828-cards.c | 23 +-
drivers/media/usb/cx231xx/cx231xx-input.c | 2 +-
drivers/media/usb/dvb-usb-v2/Kconfig | 9 +-
drivers/media/usb/dvb-usb-v2/Makefile | 4 +-
drivers/media/usb/dvb-usb-v2/af9035.c | 102 +-
drivers/media/usb/dvb-usb-v2/af9035.h | 2 +
drivers/media/usb/dvb-usb-v2/az6007.c | 4 +-
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 2 +-
drivers/media/usb/dvb-usb-v2/it913x.c | 828 -
drivers/media/usb/dvb-usb-v2/rtl28xxu.c | 123 +-
drivers/media/usb/dvb-usb-v2/rtl28xxu.h | 2 +
drivers/media/usb/dvb-usb/dvb-usb-remote.c | 2 +-
drivers/media/usb/em28xx/Kconfig | 2 +
drivers/media/usb/em28xx/em28xx-audio.c | 103 +-
drivers/media/usb/em28xx/em28xx-camera.c | 4 +-
drivers/media/usb/em28xx/em28xx-cards.c | 129 +-
drivers/media/usb/em28xx/em28xx-core.c | 54 +-
drivers/media/usb/em28xx/em28xx-dvb.c | 193 +-
drivers/media/usb/em28xx/em28xx-i2c.c | 41 +-
drivers/media/usb/em28xx/em28xx-input.c | 55 +-
drivers/media/usb/em28xx/em28xx-video.c | 56 +-
drivers/media/usb/em28xx/em28xx.h | 15 +-
drivers/media/usb/gspca/kinect.c | 7 +-
drivers/media/usb/gspca/sn9c20x.c | 1 +
drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c | 2 +-
drivers/media/usb/gspca/topro.c | 10 +-
drivers/media/usb/pwc/pwc-if.c | 19 +-
drivers/media/usb/s2255/Kconfig | 2 +-
drivers/media/usb/s2255/s2255drv.c | 1271 +-
drivers/media/usb/siano/smsusb.c | 2 +
drivers/media/usb/stk1160/stk1160-v4l.c | 2 +-
drivers/media/usb/tm6000/tm6000-alsa.c | 4 +-
drivers/media/usb/tm6000/tm6000-dvb.c | 2 +-
drivers/media/usb/tm6000/tm6000-input.c | 2 +-
drivers/media/usb/tm6000/tm6000-stds.c | 2 +-
drivers/media/usb/usbtv/Makefile | 3 +
drivers/media/usb/usbtv/usbtv-core.c | 134 +
drivers/media/usb/usbtv/{usbtv.c => usbtv-video.c} | 171 +-
drivers/media/usb/usbtv/usbtv.h | 99 +
drivers/media/usb/usbvision/usbvision.h | 8 -
drivers/media/usb/uvc/uvc_driver.c | 24 +-
drivers/media/usb/uvc/uvc_queue.c | 29 +-
drivers/media/usb/uvc/uvc_v4l2.c | 11 +
drivers/media/usb/uvc/uvc_video.c | 23 +-
drivers/media/usb/uvc/uvcvideo.h | 16 +-
drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 133 +-
drivers/media/v4l2-core/v4l2-ctrls.c | 33 +-
drivers/media/v4l2-core/v4l2-dev.c | 32 +-
drivers/media/v4l2-core/v4l2-dv-timings.c | 8 +
drivers/media/v4l2-core/v4l2-ioctl.c | 91 +-
drivers/media/v4l2-core/v4l2-of.c | 52 +-
drivers/media/v4l2-core/v4l2-subdev.c | 18 +-
drivers/media/v4l2-core/videobuf2-core.c | 658 +-
drivers/staging/media/Kconfig | 2 +
drivers/staging/media/Makefile | 2 +
.../staging/media/davinci_vpfe/dm365_ipipe_hw.c | 2 +-
.../staging/media/davinci_vpfe/vpfe_mc_capture.c | 6 +-
drivers/staging/media/davinci_vpfe/vpfe_video.c | 3 +-
drivers/staging/media/dt3155v4l/dt3155v4l.c | 5 +-
drivers/staging/media/go7007/go7007-v4l2.c | 5 +-
drivers/staging/media/msi3101/Kconfig | 7 +-
drivers/staging/media/msi3101/Makefile | 1 +
drivers/staging/media/msi3101/msi001.c | 500 +
drivers/staging/media/msi3101/sdr-msi3101.c | 1566 +-
drivers/staging/media/omap4iss/iss_video.c | 2 +-
drivers/staging/media/rtl2832u_sdr/Kconfig | 7 +
drivers/staging/media/rtl2832u_sdr/Makefile | 6 +
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c | 1500 ++
drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h | 54 +
drivers/staging/media/solo6x10/solo6x10-v4l2-enc.c | 2 +-
drivers/staging/media/solo6x10/solo6x10-v4l2.c | 2 +-
include/media/adv7842.h | 3 +
include/media/lm3646.h | 87 +
include/media/rc-core.h | 80 +-
include/media/rc-map.h | 6 +-
include/media/v4l2-dev.h | 3 +-
include/media/v4l2-ioctl.h | 10 +
include/media/v4l2-subdev.h | 9 +-
include/media/videobuf2-core.h | 117 +-
include/trace/events/v4l2.h | 1 +
include/uapi/linux/v4l2-common.h | 8 +
include/uapi/linux/v4l2-controls.h | 19 +
include/uapi/linux/v4l2-dv-timings.h | 17 +
include/uapi/linux/v4l2-subdev.h | 14 +-
include/uapi/linux/videodev2.h | 74 +-
385 files changed, 44004 insertions(+), 7910 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-rc
create mode 100644 Documentation/DocBook/media/v4l/dev-sdr.xml
create mode 100644 Documentation/DocBook/media/v4l/pixfmt-sdr-cu08.xml
create mode 100644 Documentation/DocBook/media/v4l/pixfmt-sdr-cu16le.xml
rename Documentation/DocBook/media/v4l/{vidioc-subdev-g-edid.xml => vidioc-g-edid.xml} (77%)
create mode 100644 Documentation/devicetree/bindings/media/img-ir-rev1.txt
delete mode 100644 Documentation/dvb/it9137.txt
create mode 100644 Documentation/video4linux/v4l2-pci-skeleton.c
create mode 100644 drivers/media/dvb-frontends/drx39xyj/Kconfig
create mode 100644 drivers/media/dvb-frontends/drx39xyj/Makefile
create mode 100644 drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h
create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx39xxj.h
create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_dap_fasi.h
create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_driver.h
create mode 100644 drivers/media/dvb-frontends/drx39xyj/drx_driver_version.h
create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj.c
create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj.h
create mode 100644 drivers/media/dvb-frontends/drx39xyj/drxj_map.h
delete mode 100644 drivers/media/dvb-frontends/it913x-fe-priv.h
delete mode 100644 drivers/media/dvb-frontends/it913x-fe.c
delete mode 100644 drivers/media/dvb-frontends/it913x-fe.h
create mode 100644 drivers/media/i2c/lm3646.c
create mode 100644 drivers/media/rc/img-ir/Kconfig
create mode 100644 drivers/media/rc/img-ir/Makefile
create mode 100644 drivers/media/rc/img-ir/img-ir-core.c
create mode 100644 drivers/media/rc/img-ir/img-ir-hw.c
create mode 100644 drivers/media/rc/img-ir/img-ir-hw.h
create mode 100644 drivers/media/rc/img-ir/img-ir-jvc.c
create mode 100644 drivers/media/rc/img-ir/img-ir-nec.c
create mode 100644 drivers/media/rc/img-ir/img-ir-raw.c
create mode 100644 drivers/media/rc/img-ir/img-ir-raw.h
create mode 100644 drivers/media/rc/img-ir/img-ir-sanyo.c
create mode 100644 drivers/media/rc/img-ir/img-ir-sharp.c
create mode 100644 drivers/media/rc/img-ir/img-ir-sony.c
create mode 100644 drivers/media/rc/img-ir/img-ir.h
create mode 100644 drivers/media/rc/ir-sharp-decoder.c
delete mode 100644 drivers/media/usb/dvb-usb-v2/it913x.c
create mode 100644 drivers/media/usb/usbtv/usbtv-core.c
rename drivers/media/usb/usbtv/{usbtv.c => usbtv-video.c} (81%)
create mode 100644 drivers/media/usb/usbtv/usbtv.h
create mode 100644 drivers/staging/media/msi3101/msi001.c
create mode 100644 drivers/staging/media/rtl2832u_sdr/Kconfig
create mode 100644 drivers/staging/media/rtl2832u_sdr/Makefile
create mode 100644 drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c
create mode 100644 drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.h
create mode 100644 include/media/lm3646.h
--
Regards,
Mauro
On Thu, Apr 03, 2014 at 01:11:43PM -0300, Mauro Carvalho Chehab wrote:
>Hi Linus,
>
>Please pull from:
> git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
>
...
>James Hogan (27):
...
> [media] media: rc: add sysfs scancode filtering interface
> [media] media: rc: change 32bit NEC scancode format
...
> [media] rc-main: add generic scancode filtering
Umm...we (mostly James and I, but you as well) have been discussing on
the linux-media whether those patches shouldn't be reverted...this pull
request seems to have overlooked that discussion...or have I missed
something?
--
David H?rdeman
Em Thu, 03 Apr 2014 23:46:56 +0200
David Härdeman <[email protected]> escreveu:
> On Thu, Apr 03, 2014 at 01:11:43PM -0300, Mauro Carvalho Chehab wrote:
> >Hi Linus,
> >
> >Please pull from:
> > git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
> >
> ...
> >James Hogan (27):
> ...
> > [media] media: rc: add sysfs scancode filtering interface
> > [media] media: rc: change 32bit NEC scancode format
> ...
> > [media] rc-main: add generic scancode filtering
>
> Umm...we (mostly James and I, but you as well) have been discussing on
> the linux-media whether those patches shouldn't be reverted...this pull
> request seems to have overlooked that discussion...or have I missed
> something?
The discussions didn't finish yet. We can't hold pushing the patches
forever due to a few patches in this series, and there's another pull
request waiting for this to be merged.
We can latter send a fix for the patches that are not ok early at
-rc tests, or next week if we come on an agreement.
Regards,
Mauro
On Thu, Apr 3, 2014 at 9:11 AM, Mauro Carvalho Chehab
<[email protected]> wrote:
>
> PS.: You'll find some minor conflicts between this changeset and upstream,
> mainly due to some code that moved from V4L2 to OF subsystem.
That conflict was not at all minor, unless I were willing to do the
merge incorrectly and just drop all changes from one side. Which is
not how I do merges if I can at all avoid it.
The *trivial* merge would be to just take the
of_graph_get_next_endpoint() function as it existed in its new
location of drivers/of/base.c.
However, there were to clashing changes to that function (one in the
original location, one in the new moved location). They were:
- b9db140c1e46: "[media] v4l: of: Support empty port nodes"
- 4329b93b283c: "of: Reduce indentation in of_graph_get_next_endpoint"
and quite frankly, I think that the second commit was the much less
interesting of the two, so *that* was the one I felt I should drop.
But that made the merge a lot more interesting than just picking the
new location (because the new location didn't have the important
change). And those two changes clash to the point of being basically
mutually exclusive.
So I did the complex merge that I think is the right thing by hand.
However, I feel a bit bad about that more merge, because I have
absolutely no way to test my result. So I'm including here all the
relevant people wrt those two commits, and my note from my merge
message:
NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce
indentation in of_graph_get_next_endpoint").
The of_graph_get_next_endpoint() function was moved and renamed by
commit fd9fdb78a9bf ("[media] of: move graph helpers from
drivers/media/v4l2-core to drivers/of"). It was originally called
v4l2_of_get_next_endpoint() and lived in the file
drivers/media/v4l2-core/v4l2-of.c.
In that original location, it was then fixed to support empty port
nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port
nodes"), and that commit clashes badly with the dropped "Reduce
intendation" commit. I had to choose one or the other, and decided
that the "Support empty port nodes" commit was more important
So guys, can you please verify the end result? It looks sane to me,
but there's no good way for me to do even basic compile testing of the
OF code, so this was all done entirely blind. And hey, maybe you
disagree about the empty port nodes being the important case anyway.
Maybe I should have done the "wrong" merge just to avoid this issue,
but I do hate doing that.
Linus
Hi Linus,
On Friday 04 April 2014 10:26:42 Linus Torvalds wrote:
> On Thu, Apr 3, 2014 at 9:11 AM, Mauro Carvalho Chehab wrote:
> > PS.: You'll find some minor conflicts between this changeset and upstream,
> > mainly due to some code that moved from V4L2 to OF subsystem.
>
> That conflict was not at all minor, unless I were willing to do the
> merge incorrectly and just drop all changes from one side. Which is
> not how I do merges if I can at all avoid it.
>
> The *trivial* merge would be to just take the
> of_graph_get_next_endpoint() function as it existed in its new
> location of drivers/of/base.c.
>
> However, there were to clashing changes to that function (one in the
> original location, one in the new moved location). They were:
>
> - b9db140c1e46: "[media] v4l: of: Support empty port nodes"
> - 4329b93b283c: "of: Reduce indentation in of_graph_get_next_endpoint"
>
> and quite frankly, I think that the second commit was the much less
> interesting of the two, so *that* was the one I felt I should drop.
> But that made the merge a lot more interesting than just picking the
> new location (because the new location didn't have the important
> change). And those two changes clash to the point of being basically
> mutually exclusive.
>
> So I did the complex merge that I think is the right thing by hand.
>
> However, I feel a bit bad about that more merge, because I have
> absolutely no way to test my result. So I'm including here all the
> relevant people wrt those two commits, and my note from my merge
> message:
>
> NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce
> indentation in of_graph_get_next_endpoint").
>
> The of_graph_get_next_endpoint() function was moved and renamed by
> commit fd9fdb78a9bf ("[media] of: move graph helpers from
> drivers/media/v4l2-core to drivers/of"). It was originally called
> v4l2_of_get_next_endpoint() and lived in the file
> drivers/media/v4l2-core/v4l2-of.c.
>
> In that original location, it was then fixed to support empty port
> nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port
> nodes"), and that commit clashes badly with the dropped "Reduce
> intendation" commit. I had to choose one or the other, and decided
> that the "Support empty port nodes" commit was more important
>
> So guys, can you please verify the end result? It looks sane to me,
> but there's no good way for me to do even basic compile testing of the
> OF code, so this was all done entirely blind. And hey, maybe you
> disagree about the empty port nodes being the important case anyway.
>
> Maybe I should have done the "wrong" merge just to avoid this issue,
> but I do hate doing that.
I've reviewed the merge and tested it, and all looks good. Thank you for not
dropping my patch :-)
--
Regards,
Laurent Pinchart
On Thu, Apr 3, 2014 at 9:11 AM, Mauro Carvalho Chehab
<[email protected]> wrote:
>
> Please pull from:
> git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
Oh, just noticed that this seems to be the cause of a new annoying warning:
usr/include/linux/v4l2-common.h:72: found __[us]{8,16,32,64} type
without #include <linux/types.h>
which seems to have come in through commits 777f4f85b75f1 and 254a47770163f.
I think the proper fix is to just add that
#include <linux/types.h>
to include/uapi/linux/v4l2-common.h. Assuming that really is supposed
to be a user-visible API at all?
Linus
On Thu, 2014-04-03 at 13:11 -0300, Mauro Carvalho Chehab wrote:
> Devin Heitmueller (3):
> [...]
> [media] drx-j: add a driver for Trident drx-j frontend
This commit introduced a reference to DVB_FE_CUSTOMISE. But that Kconfig
symbol was removed in v3.7. It seems that the intent was to use
MEDIA_SUBDRV_AUTOSELECT here.
So the following (untested!) patch makes the Kconfig entry for "Micronas
DRX-J demodulator" use the current symbol. It is basically a copy of
d65fcbb0007b "([media] ts2020: use customise option correctly").
--------- >8 ---------
From: Paul Bolle <[email protected]>
The Kconfig entry for "Micronas DRX-J demodulator" defaults to modular
if DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with
MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate
the logic, because MEDIA_SUBDRV_AUTOSELECT's logic is the opposite of
the former logic.
Signed-off-by: Paul Bolle <[email protected]>
---
drivers/media/dvb-frontends/drx39xyj/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/drx39xyj/Kconfig b/drivers/media/dvb-frontends/drx39xyj/Kconfig
index 15628eb5cf0c..6c2ccb6a506b 100644
--- a/drivers/media/dvb-frontends/drx39xyj/Kconfig
+++ b/drivers/media/dvb-frontends/drx39xyj/Kconfig
@@ -1,7 +1,7 @@
config DVB_DRX39XYJ
tristate "Micronas DRX-J demodulator"
depends on DVB_CORE && I2C
- default m if DVB_FE_CUSTOMISE
+ default m if !MEDIA_SUBDRV_AUTOSELECT
help
An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
to support this frontend.
--
1.9.0
On Fri, Apr 4, 2014 at 9:17 PM, Laurent Pinchart
<[email protected]> wrote:
> Hi Linus,
>
> On Friday 04 April 2014 10:26:42 Linus Torvalds wrote:
>> So guys, can you please verify the end result? It looks sane to me,
>> but there's no good way for me to do even basic compile testing of the
>> OF code, so this was all done entirely blind. And hey, maybe you
>> disagree about the empty port nodes being the important case anyway.
>>
>> Maybe I should have done the "wrong" merge just to avoid this issue,
>> but I do hate doing that.
>
> I've reviewed the merge and tested it, and all looks good.
Same here. That merge contains the preferred choice, and it still works.
regards
Philipp
Em Fri, 04 Apr 2014 15:04:16 -0700
Linus Torvalds <[email protected]> escreveu:
> On Thu, Apr 3, 2014 at 9:11 AM, Mauro Carvalho Chehab
> <[email protected]> wrote:
> >
> > Please pull from:
> > git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media v4l_for_linus
>
> Oh, just noticed that this seems to be the cause of a new annoying warning:
>
> usr/include/linux/v4l2-common.h:72: found __[us]{8,16,32,64} type
> without #include <linux/types.h>
>
> which seems to have come in through commits 777f4f85b75f1 and 254a47770163f.
>
> I think the proper fix is to just add that
>
> #include <linux/types.h>
Yes, this is the proper fix. Thanks for noticing. I added a make
headers_check on my test scripts, to allow me to notice things like
that next time.
I just committed a patch for it on my tree. I'll send you together
with a few other fixes at the beginning of the next week.
>
> to include/uapi/linux/v4l2-common.h. Assuming that really is supposed
> to be a user-visible API at all?
>
> Linus
Thanks!
Mauro