AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new
IP module found on i.MX8MP.
Signed-off-by: Shengjiu Wang <[email protected]>
---
.../bindings/sound/fsl,aud2htx.yaml | 67 +++++++++++++++++++
1 file changed, 67 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
new file mode 100644
index 000000000000..18548d0889a8
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
+
+maintainers:
+ - Shengjiu Wang <[email protected]>
+
+properties:
+ $nodename:
+ pattern: "^aud2htx@.*"
+
+ compatible:
+ const: fsl,imx8mp-aud2htx
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Peripheral clock
+
+ clock-names:
+ items:
+ - const: bus
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: tx
+
+ power-domains:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/imx8mp-clock.h>
+
+ aud2htx: aud2htx@30cb0000 {
+ compatible = "fsl,imx8mp-aud2htx";
+ reg = <0x30cb0000 0x10000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&audiomix_clk IMX8MP_CLK_AUDIOMIX_AUD2HTX_IPG>;
+ clock-names = "bus";
+ dmas = <&sdma2 26 2 0>;
+ dma-names = "tx";
+ power-domains = <&audiomix_pd>;
+ };
--
2.27.0
The AUD2HTX is a digital module that provides a bridge between
the Audio Subsystem and the HDMI RTX Subsystem. This module
includes intermediate storage to queue SDMA transactions prior
to being synchronized and passed to the HDMI RTX Subsystem over
the Audio Link.
The AUD2HTX contains a DMA request routed to the SDMA module.
This DMA request is controlled based on the watermark level in
the 32-entry sample buffer.
Signed-off-by: Shengjiu Wang <[email protected]>
---
sound/soc/fsl/Kconfig | 8 +
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/fsl_aud2htx.c | 322 ++++++++++++++++++++++++++++++++++++
sound/soc/fsl/fsl_aud2htx.h | 67 ++++++++
4 files changed, 399 insertions(+)
create mode 100644 sound/soc/fsl/fsl_aud2htx.c
create mode 100644 sound/soc/fsl/fsl_aud2htx.h
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 3f76ff71ea47..5234d9ab9884 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -95,6 +95,14 @@ config SND_SOC_FSL_EASRC
destination sample rate. It is a new design module compare with the
old ASRC.
+config SND_SOC_FSL_AUD2HTX
+ tristate "AUDIO TO HDMI TX module support"
+ select REGMAP_MMIO
+ select SND_SOC_IMX_PCM_DMA if SND_IMX_SOC != n
+ select SND_SOC_GENERIC_DMAENGINE_PCM
+ help
+ Say Y if you want to add AUDIO TO HDMI TX support for NXP.
+
config SND_SOC_FSL_UTILS
tristate
diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile
index b835eebf8825..78bc088b39d5 100644
--- a/sound/soc/fsl/Makefile
+++ b/sound/soc/fsl/Makefile
@@ -25,6 +25,7 @@ snd-soc-fsl-utils-objs := fsl_utils.o
snd-soc-fsl-dma-objs := fsl_dma.o
snd-soc-fsl-mqs-objs := fsl_mqs.o
snd-soc-fsl-easrc-objs := fsl_easrc.o
+snd-soc-fsl-aud2htx-objs := fsl_aud2htx.o
obj-$(CONFIG_SND_SOC_FSL_AUDMIX) += snd-soc-fsl-audmix.o
obj-$(CONFIG_SND_SOC_FSL_ASOC_CARD) += snd-soc-fsl-asoc-card.o
@@ -38,6 +39,7 @@ obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o
obj-$(CONFIG_SND_SOC_FSL_MQS) += snd-soc-fsl-mqs.o
obj-$(CONFIG_SND_SOC_FSL_EASRC) += snd-soc-fsl-easrc.o
obj-$(CONFIG_SND_SOC_POWERPC_DMA) += snd-soc-fsl-dma.o
+obj-$(CONFIG_SND_SOC_FSL_AUD2HTX) += snd-soc-fsl-aud2htx.o
# MPC5200 Platform Support
obj-$(CONFIG_SND_MPC52xx_DMA) += mpc5200_dma.o
diff --git a/sound/soc/fsl/fsl_aud2htx.c b/sound/soc/fsl/fsl_aud2htx.c
new file mode 100644
index 000000000000..8c4b897db6f0
--- /dev/null
+++ b/sound/soc/fsl/fsl_aud2htx.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2020 NXP
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/pm_qos.h>
+#include <sound/core.h>
+#include <sound/dmaengine_pcm.h>
+#include <sound/pcm_params.h>
+#include <linux/dma-mapping.h>
+
+#include "fsl_aud2htx.h"
+#include "imx-pcm.h"
+
+static int fsl_aud2htx_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *cpu_dai)
+{
+ struct fsl_aud2htx *aud2htx = snd_soc_dai_get_drvdata(cpu_dai);
+
+ /* DMA request when number of entries < WTMK_LOW */
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
+ AUD2HTX_CTRE_DT_MASK, 0);
+
+ /* Disable interrupts*/
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_IRQ_MASK,
+ AUD2HTX_WM_HIGH_IRQ_MASK |
+ AUD2HTX_WM_LOW_IRQ_MASK |
+ AUD2HTX_OVF_MASK,
+ AUD2HTX_WM_HIGH_IRQ_MASK |
+ AUD2HTX_WM_LOW_IRQ_MASK |
+ AUD2HTX_OVF_MASK);
+
+ /* Configur watermark */
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
+ AUD2HTX_CTRE_WL_MASK,
+ AUD2HTX_WTMK_LOW << AUD2HTX_CTRE_WL_SHIFT);
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
+ AUD2HTX_CTRE_WH_MASK,
+ AUD2HTX_WTMK_HIGH << AUD2HTX_CTRE_WH_SHIFT);
+ return 0;
+}
+
+static int fsl_aud2htx_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct fsl_aud2htx *aud2htx = snd_soc_dai_get_drvdata(dai);
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL,
+ AUD2HTX_CTRL_EN, AUD2HTX_CTRL_EN);
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
+ AUD2HTX_CTRE_DE, AUD2HTX_CTRE_DE);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
+ AUD2HTX_CTRE_DE, 0);
+ regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL,
+ AUD2HTX_CTRL_EN, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct snd_soc_dai_ops fsl_aud2htx_dai_ops = {
+ .hw_params = fsl_aud2htx_hw_params,
+ .trigger = fsl_aud2htx_trigger,
+};
+
+static int fsl_aud2htx_dai_probe(struct snd_soc_dai *cpu_dai)
+{
+ struct fsl_aud2htx *aud2htx = dev_get_drvdata(cpu_dai->dev);
+
+ snd_soc_dai_init_dma_data(cpu_dai, &aud2htx->dma_params_tx,
+ &aud2htx->dma_params_rx);
+
+ return 0;
+}
+
+static struct snd_soc_dai_driver fsl_aud2htx_dai = {
+ .probe = fsl_aud2htx_dai_probe,
+ .playback = {
+ .stream_name = "CPU-Playback",
+ .channels_min = 1,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_32000 |
+ SNDRV_PCM_RATE_44100 |
+ SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_88200 |
+ SNDRV_PCM_RATE_96000 |
+ SNDRV_PCM_RATE_176400 |
+ SNDRV_PCM_RATE_192000,
+ .formats = FSL_AUD2HTX_FORMATS,
+ },
+ .ops = &fsl_aud2htx_dai_ops,
+};
+
+static const struct snd_soc_component_driver fsl_aud2htx_component = {
+ .name = "fsl-aud2htx",
+};
+
+static const struct reg_default fsl_aud2htx_reg_defaults[] = {
+ {AUD2HTX_CTRL, 0x00000000},
+ {AUD2HTX_CTRL_EXT, 0x00000000},
+ {AUD2HTX_WR, 0x00000000},
+ {AUD2HTX_STATUS, 0x00000000},
+ {AUD2HTX_IRQ_NOMASK, 0x00000000},
+ {AUD2HTX_IRQ_MASKED, 0x00000000},
+ {AUD2HTX_IRQ_MASK, 0x00000000},
+};
+
+static bool fsl_aud2htx_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AUD2HTX_CTRL:
+ case AUD2HTX_CTRL_EXT:
+ case AUD2HTX_STATUS:
+ case AUD2HTX_IRQ_NOMASK:
+ case AUD2HTX_IRQ_MASKED:
+ case AUD2HTX_IRQ_MASK:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool fsl_aud2htx_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AUD2HTX_CTRL:
+ case AUD2HTX_CTRL_EXT:
+ case AUD2HTX_WR:
+ case AUD2HTX_IRQ_NOMASK:
+ case AUD2HTX_IRQ_MASKED:
+ case AUD2HTX_IRQ_MASK:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool fsl_aud2htx_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AUD2HTX_STATUS:
+ case AUD2HTX_IRQ_NOMASK:
+ case AUD2HTX_IRQ_MASKED:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config fsl_aud2htx_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .max_register = AUD2HTX_IRQ_MASK,
+ .reg_defaults = fsl_aud2htx_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(fsl_aud2htx_reg_defaults),
+ .readable_reg = fsl_aud2htx_readable_reg,
+ .volatile_reg = fsl_aud2htx_volatile_reg,
+ .writeable_reg = fsl_aud2htx_writeable_reg,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static const struct of_device_id fsl_aud2htx_dt_ids[] = {
+ { .compatible = "fsl,imx8mp-aud2htx",},
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_aud2htx_dt_ids);
+
+static irqreturn_t fsl_aud2htx_isr(int irq, void *dev_id)
+{
+ return IRQ_HANDLED;
+}
+
+static int fsl_aud2htx_probe(struct platform_device *pdev)
+{
+ struct fsl_aud2htx *aud2htx;
+ struct resource *res;
+ void __iomem *regs;
+ int ret, irq;
+
+ aud2htx = devm_kzalloc(&pdev->dev, sizeof(*aud2htx), GFP_KERNEL);
+ if (!aud2htx)
+ return -ENOMEM;
+
+ aud2htx->pdev = pdev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(regs)) {
+ dev_err(&pdev->dev, "failed ioremap\n");
+ return PTR_ERR(regs);
+ }
+
+ aud2htx->regmap = devm_regmap_init_mmio(&pdev->dev, regs,
+ &fsl_aud2htx_regmap_config);
+ if (IS_ERR(aud2htx->regmap)) {
+ dev_err(&pdev->dev, "failed to init regmap");
+ return PTR_ERR(aud2htx->regmap);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq for node %s\n",
+ dev_name(&pdev->dev));
+ return irq;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, fsl_aud2htx_isr, 0,
+ dev_name(&pdev->dev), aud2htx);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to claim irq %u: %d\n", irq, ret);
+ return ret;
+ }
+
+ aud2htx->bus_clk = devm_clk_get(&pdev->dev, "bus");
+ if (IS_ERR(aud2htx->bus_clk)) {
+ dev_err(&pdev->dev, "failed to get mem clock\n");
+ return PTR_ERR(aud2htx->bus_clk);
+ }
+
+ aud2htx->dma_params_tx.chan_name = "tx";
+ aud2htx->dma_params_tx.maxburst = AUD2HTX_MAXBURST;
+ aud2htx->dma_params_tx.addr = res->start + AUD2HTX_WR;
+
+ platform_set_drvdata(pdev, aud2htx);
+ pm_runtime_enable(&pdev->dev);
+
+ regcache_cache_only(aud2htx->regmap, true);
+
+ ret = devm_snd_soc_register_component(&pdev->dev,
+ &fsl_aud2htx_component,
+ &fsl_aud2htx_dai, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register ASoC DAI\n");
+ return ret;
+ }
+
+ ret = imx_pcm_dma_init(pdev, IMX_DEFAULT_DMABUF_SIZE);
+ if (ret)
+ dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret);
+
+ return ret;
+}
+
+static int fsl_aud2htx_remove(struct platform_device *pdev)
+{
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int fsl_aud2htx_runtime_suspend(struct device *dev)
+{
+ struct fsl_aud2htx *aud2htx = dev_get_drvdata(dev);
+
+ regcache_cache_only(aud2htx->regmap, true);
+ clk_disable_unprepare(aud2htx->bus_clk);
+
+ return 0;
+}
+
+static int fsl_aud2htx_runtime_resume(struct device *dev)
+{
+ struct fsl_aud2htx *aud2htx = dev_get_drvdata(dev);
+ int ret;
+
+ ret = clk_prepare_enable(aud2htx->bus_clk);
+ if (ret)
+ return ret;
+
+ regcache_cache_only(aud2htx->regmap, false);
+ regcache_mark_dirty(aud2htx->regmap);
+ regcache_sync(aud2htx->regmap);
+
+ return 0;
+}
+#endif /*CONFIG_PM*/
+
+static const struct dev_pm_ops fsl_aud2htx_pm_ops = {
+ SET_RUNTIME_PM_OPS(fsl_aud2htx_runtime_suspend,
+ fsl_aud2htx_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+};
+
+static struct platform_driver fsl_aud2htx_driver = {
+ .probe = fsl_aud2htx_probe,
+ .remove = fsl_aud2htx_remove,
+ .driver = {
+ .name = "fsl-aud2htx",
+ .pm = &fsl_aud2htx_pm_ops,
+ .of_match_table = fsl_aud2htx_dt_ids,
+ },
+};
+module_platform_driver(fsl_aud2htx_driver);
+
+MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
+MODULE_DESCRIPTION("NXP AUD2HTX driver");
+MODULE_LICENSE("GPL v2");
diff --git a/sound/soc/fsl/fsl_aud2htx.h b/sound/soc/fsl/fsl_aud2htx.h
new file mode 100644
index 000000000000..ffa98e6af5ec
--- /dev/null
+++ b/sound/soc/fsl/fsl_aud2htx.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 NXP
+ */
+
+#ifndef _FSL_AUD2HTX_H
+#define _FSL_AUD2HTX_H
+
+#define FSL_AUD2HTX_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+/* AUD2HTX Register Map */
+#define AUD2HTX_CTRL 0x0 /* AUD2HTX Control Register */
+#define AUD2HTX_CTRL_EXT 0x4 /* AUD2HTX Control Extended Register */
+#define AUD2HTX_WR 0x8 /* AUD2HTX Write Register */
+#define AUD2HTX_STATUS 0xC /* AUD2HTX Status Register */
+#define AUD2HTX_IRQ_NOMASK 0x10 /* AUD2HTX Nonmasked Interrupt Flags Register */
+#define AUD2HTX_IRQ_MASKED 0x14 /* AUD2HTX Masked Interrupt Flags Register */
+#define AUD2HTX_IRQ_MASK 0x18 /* AUD2HTX IRQ Masks Register */
+
+/* AUD2HTX Control Register */
+#define AUD2HTX_CTRL_EN BIT(0)
+
+/* AUD2HTX Control Extended Register */
+#define AUD2HTX_CTRE_DE BIT(0)
+#define AUD2HTX_CTRE_DT_SHIFT 0x1
+#define AUD2HTX_CTRE_DT_WIDTH 0x2
+#define AUD2HTX_CTRE_DT_MASK ((BIT(AUD2HTX_CTRE_DT_WIDTH) - 1) \
+ << AUD2HTX_CTRE_DT_SHIFT)
+#define AUD2HTX_CTRE_WL_SHIFT 16
+#define AUD2HTX_CTRE_WL_WIDTH 5
+#define AUD2HTX_CTRE_WL_MASK ((BIT(AUD2HTX_CTRE_WL_WIDTH) - 1) \
+ << AUD2HTX_CTRE_WL_SHIFT)
+#define AUD2HTX_CTRE_WH_SHIFT 24
+#define AUD2HTX_CTRE_WH_WIDTH 5
+#define AUD2HTX_CTRE_WH_MASK ((BIT(AUD2HTX_CTRE_WH_WIDTH) - 1) \
+ << AUD2HTX_CTRE_WH_SHIFT)
+
+/* AUD2HTX IRQ Masks Register */
+#define AUD2HTX_WM_HIGH_IRQ_MASK BIT(2)
+#define AUD2HTX_WM_LOW_IRQ_MASK BIT(1)
+#define AUD2HTX_OVF_MASK BIT(0)
+
+#define AUD2HTX_FIFO_DEPTH 0x20
+#define AUD2HTX_WTMK_LOW 0x10
+#define AUD2HTX_WTMK_HIGH 0x10
+#define AUD2HTX_MAXBURST 0x10
+
+/**
+ * fsl_aud2htx: AUD2HTX private data
+ *
+ * @pdev: platform device pointer
+ * @regmap: regmap handler
+ * @bus_clk: clock source to access register
+ * @dma_params_rx: DMA parameters for receive channel
+ * @dma_params_tx: DMA parameters for transmit channel
+ */
+struct fsl_aud2htx {
+ struct platform_device *pdev;
+ struct regmap *regmap;
+ struct clk *bus_clk;
+
+ struct snd_dmaengine_dai_dma_data dma_params_rx;
+ struct snd_dmaengine_dai_dma_data dma_params_tx;
+};
+
+#endif /* _FSL_AUD2HTX_H */
--
2.27.0
On Mon, Oct 26, 2020 at 06:40:55PM +0800, Shengjiu Wang wrote:
> +static int fsl_aud2htx_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params,
> + struct snd_soc_dai *cpu_dai)
> +{
> + struct fsl_aud2htx *aud2htx = snd_soc_dai_get_drvdata(cpu_dai);
> +
> + /* DMA request when number of entries < WTMK_LOW */
> + regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
> + AUD2HTX_CTRE_DT_MASK, 0);
> +
> + /* Disable interrupts*/
> + regmap_update_bits(aud2htx->regmap, AUD2HTX_IRQ_MASK,
> + AUD2HTX_WM_HIGH_IRQ_MASK |
> + AUD2HTX_WM_LOW_IRQ_MASK |
> + AUD2HTX_OVF_MASK,
> + AUD2HTX_WM_HIGH_IRQ_MASK |
> + AUD2HTX_WM_LOW_IRQ_MASK |
> + AUD2HTX_OVF_MASK);
> +
> + /* Configur watermark */
> + regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
> + AUD2HTX_CTRE_WL_MASK,
> + AUD2HTX_WTMK_LOW << AUD2HTX_CTRE_WL_SHIFT);
> + regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
> + AUD2HTX_CTRE_WH_MASK,
> + AUD2HTX_WTMK_HIGH << AUD2HTX_CTRE_WH_SHIFT);
> + return 0;
> +}
This doesn't look like a hw_params operation - it doesn't appear to
reference the params at all, or even containt any conditional
statements. Shouldn't this be configured just once at driver load?
On Mon, Oct 26, 2020 at 9:31 PM Mark Brown <[email protected]> wrote:
>
> On Mon, Oct 26, 2020 at 06:40:55PM +0800, Shengjiu Wang wrote:
>
> > +static int fsl_aud2htx_hw_params(struct snd_pcm_substream *substream,
> > + struct snd_pcm_hw_params *params,
> > + struct snd_soc_dai *cpu_dai)
> > +{
> > + struct fsl_aud2htx *aud2htx = snd_soc_dai_get_drvdata(cpu_dai);
> > +
> > + /* DMA request when number of entries < WTMK_LOW */
> > + regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
> > + AUD2HTX_CTRE_DT_MASK, 0);
> > +
> > + /* Disable interrupts*/
> > + regmap_update_bits(aud2htx->regmap, AUD2HTX_IRQ_MASK,
> > + AUD2HTX_WM_HIGH_IRQ_MASK |
> > + AUD2HTX_WM_LOW_IRQ_MASK |
> > + AUD2HTX_OVF_MASK,
> > + AUD2HTX_WM_HIGH_IRQ_MASK |
> > + AUD2HTX_WM_LOW_IRQ_MASK |
> > + AUD2HTX_OVF_MASK);
> > +
> > + /* Configur watermark */
> > + regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
> > + AUD2HTX_CTRE_WL_MASK,
> > + AUD2HTX_WTMK_LOW << AUD2HTX_CTRE_WL_SHIFT);
> > + regmap_update_bits(aud2htx->regmap, AUD2HTX_CTRL_EXT,
> > + AUD2HTX_CTRE_WH_MASK,
> > + AUD2HTX_WTMK_HIGH << AUD2HTX_CTRE_WH_SHIFT);
> > + return 0;
> > +}
>
> This doesn't look like a hw_params operation - it doesn't appear to
> reference the params at all, or even containt any conditional
> statements. Shouldn't this be configured just once at driver load?
Ok, I will update it.
best regards
wang shengjiu
On Mon, Oct 26, 2020 at 06:40:54PM +0800, Shengjiu Wang wrote:
> AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new
> IP module found on i.MX8MP.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
> ---
> .../bindings/sound/fsl,aud2htx.yaml | 67 +++++++++++++++++++
> 1 file changed, 67 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
>
> diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> new file mode 100644
> index 000000000000..18548d0889a8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
> +
> +maintainers:
> + - Shengjiu Wang <[email protected]>
> +
> +properties:
> + $nodename:
> + pattern: "^aud2htx@.*"
aud2htx is not a generic class of a device so it should not be enforced.
> +
> + compatible:
> + const: fsl,imx8mp-aud2htx
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Peripheral clock
> +
> + clock-names:
> + items:
> + - const: bus
> +
> + dmas:
> + items:
> + - description: DMA controller phandle and request line for TX
> +
> + dma-names:
> + items:
> + - const: tx
> +
> + power-domains:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - dmas
> + - dma-names
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/imx8mp-clock.h>
> +
> + aud2htx: aud2htx@30cb0000 {
> + compatible = "fsl,imx8mp-aud2htx";
Wrong indentation. Most of examples are indented with 4 spaces.
Best regards,
Krzysztof
On Tue, Oct 27, 2020 at 7:09 PM Krzysztof Kozlowski <[email protected]> wrote:
>
> On Mon, Oct 26, 2020 at 06:40:54PM +0800, Shengjiu Wang wrote:
> > AUD2HTX (Audio Subsystem TO HDMI TX Subsystem) is a new
> > IP module found on i.MX8MP.
> >
> > Signed-off-by: Shengjiu Wang <[email protected]>
> > ---
> > .../bindings/sound/fsl,aud2htx.yaml | 67 +++++++++++++++++++
> > 1 file changed, 67 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> > new file mode 100644
> > index 000000000000..18548d0889a8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/fsl,aud2htx.yaml
> > @@ -0,0 +1,67 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/fsl,aud2htx.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP Audio Subsystem to HDMI RTX Subsystem Controller
> > +
> > +maintainers:
> > + - Shengjiu Wang <[email protected]>
> > +
> > +properties:
> > + $nodename:
> > + pattern: "^aud2htx@.*"
>
> aud2htx is not a generic class of a device so it should not be enforced.
>
> > +
> > + compatible:
> > + const: fsl,imx8mp-aud2htx
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Peripheral clock
> > +
> > + clock-names:
> > + items:
> > + - const: bus
> > +
> > + dmas:
> > + items:
> > + - description: DMA controller phandle and request line for TX
> > +
> > + dma-names:
> > + items:
> > + - const: tx
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - dmas
> > + - dma-names
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/imx8mp-clock.h>
> > +
> > + aud2htx: aud2htx@30cb0000 {
> > + compatible = "fsl,imx8mp-aud2htx";
>
> Wrong indentation. Most of examples are indented with 4 spaces.
>
ok, I will update it.
best regards
wang shengjiu