This patch helps mapping with gpio_to_irq for the GPIOs that are irq enabled.
Signed-off-by: Roland Stigge <[email protected]>
---
Applies to 3.5-rc3
drivers/gpio/gpio-lpc32xx.c | 65 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 65 insertions(+)
--- linux-2.6.orig/drivers/gpio/gpio-lpc32xx.c
+++ linux-2.6/drivers/gpio/gpio-lpc32xx.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/gpio-lpc32xx.h>
+#include <mach/irqs.h>
#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
@@ -367,6 +368,66 @@ static int lpc32xx_gpio_request(struct g
return -EINVAL;
}
+static int lpc32xx_gpio_to_irq_p01(struct gpio_chip *chip, unsigned offset)
+{
+ return IRQ_LPC32XX_P0_P1_IRQ;
+}
+
+static const char lpc32xx_gpio_to_irq_gpio_p3_table[] = {
+ IRQ_LPC32XX_GPIO_00,
+ IRQ_LPC32XX_GPIO_01,
+ IRQ_LPC32XX_GPIO_02,
+ IRQ_LPC32XX_GPIO_03,
+ IRQ_LPC32XX_GPIO_04,
+ IRQ_LPC32XX_GPIO_05,
+};
+
+static int lpc32xx_gpio_to_irq_gpio_p3(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset < ARRAY_SIZE(lpc32xx_gpio_to_irq_gpio_p3_table))
+ return lpc32xx_gpio_to_irq_gpio_p3_table[offset];
+ return -ENXIO;
+}
+
+static const char lpc32xx_gpio_to_irq_gpi_p3_table[] = {
+ IRQ_LPC32XX_GPI_00,
+ IRQ_LPC32XX_GPI_01,
+ IRQ_LPC32XX_GPI_02,
+ IRQ_LPC32XX_GPI_03,
+ IRQ_LPC32XX_GPI_04,
+ IRQ_LPC32XX_GPI_05,
+ IRQ_LPC32XX_GPI_06,
+ IRQ_LPC32XX_GPI_07,
+ IRQ_LPC32XX_GPI_08,
+ IRQ_LPC32XX_GPI_09,
+ -ENXIO, /* 10 */
+ -ENXIO, /* 11 */
+ -ENXIO, /* 12 */
+ -ENXIO, /* 13 */
+ -ENXIO, /* 14 */
+ -ENXIO, /* 15 */
+ -ENXIO, /* 16 */
+ -ENXIO, /* 17 */
+ -ENXIO, /* 18 */
+ IRQ_LPC32XX_GPI_19,
+ -ENXIO, /* 20 */
+ -ENXIO, /* 21 */
+ -ENXIO, /* 22 */
+ -ENXIO, /* 23 */
+ -ENXIO, /* 24 */
+ -ENXIO, /* 25 */
+ -ENXIO, /* 26 */
+ -ENXIO, /* 27 */
+ IRQ_LPC32XX_GPI_28,
+};
+
+static int lpc32xx_gpio_to_irq_gpi_p3(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset < ARRAY_SIZE(lpc32xx_gpio_to_irq_gpi_p3_table))
+ return lpc32xx_gpio_to_irq_gpi_p3_table[offset];
+ return -ENXIO;
+}
+
static struct lpc32xx_gpio_chip lpc32xx_gpiochip[] = {
{
.chip = {
@@ -376,6 +437,7 @@ static struct lpc32xx_gpio_chip lpc32xx_
.direction_output = lpc32xx_gpio_dir_output_p012,
.set = lpc32xx_gpio_set_value_p012,
.request = lpc32xx_gpio_request,
+ .to_irq = lpc32xx_gpio_to_irq_p01,
.base = LPC32XX_GPIO_P0_GRP,
.ngpio = LPC32XX_GPIO_P0_MAX,
.names = gpio_p0_names,
@@ -391,6 +453,7 @@ static struct lpc32xx_gpio_chip lpc32xx_
.direction_output = lpc32xx_gpio_dir_output_p012,
.set = lpc32xx_gpio_set_value_p012,
.request = lpc32xx_gpio_request,
+ .to_irq = lpc32xx_gpio_to_irq_p01,
.base = LPC32XX_GPIO_P1_GRP,
.ngpio = LPC32XX_GPIO_P1_MAX,
.names = gpio_p1_names,
@@ -421,6 +484,7 @@ static struct lpc32xx_gpio_chip lpc32xx_
.direction_output = lpc32xx_gpio_dir_output_p3,
.set = lpc32xx_gpio_set_value_p3,
.request = lpc32xx_gpio_request,
+ .to_irq = lpc32xx_gpio_to_irq_gpio_p3,
.base = LPC32XX_GPIO_P3_GRP,
.ngpio = LPC32XX_GPIO_P3_MAX,
.names = gpio_p3_names,
@@ -434,6 +498,7 @@ static struct lpc32xx_gpio_chip lpc32xx_
.direction_input = lpc32xx_gpio_dir_in_always,
.get = lpc32xx_gpi_get_value,
.request = lpc32xx_gpio_request,
+ .to_irq = lpc32xx_gpio_to_irq_gpi_p3,
.base = LPC32XX_GPI_P3_GRP,
.ngpio = LPC32XX_GPI_P3_MAX,
.names = gpi_p3_names,
On Wed, Jun 20, 2012 at 11:33 AM, Roland Stigge <[email protected]> wrote:
> This patch helps mapping with gpio_to_irq for the GPIOs that are irq enabled.
>
> Signed-off-by: Roland Stigge <[email protected]>
Tested-by: Alexandre Pereira da Silva <[email protected]>