Handles target type crop by setting the new active rectangle
to hardware. The new rectangle should be within YUV size.
Signed-off-by: Malathi Gottam <[email protected]>
---
drivers/media/platform/qcom/venus/venc.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/venc.c b/drivers/media/platform/qcom/venus/venc.c
index 3f50cd0..754c19a 100644
--- a/drivers/media/platform/qcom/venus/venc.c
+++ b/drivers/media/platform/qcom/venus/venc.c
@@ -478,16 +478,31 @@ static int venc_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
venc_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
{
struct venus_inst *inst = to_inst(file);
+ int ret;
+ u32 buftype;
if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
return -EINVAL;
switch (s->target) {
case V4L2_SEL_TGT_CROP:
- if (s->r.width != inst->out_width ||
- s->r.height != inst->out_height ||
+ if (s->r.width > inst->out_width ||
+ s->r.height > inst->out_height ||
s->r.top != 0 || s->r.left != 0)
return -EINVAL;
+ if (s->r.width != inst->width ||
+ s->r.height != inst->height) {
+ buftype = HFI_BUFFER_OUTPUT;
+ ret = venus_helper_set_output_resolution(inst,
+ s->r.width,
+ s->r.height,
+ buftype);
+ if (ret)
+ return ret;
+
+ inst->width = s->r.width;
+ inst->height = s->r.height;
+ }
break;
default:
return -EINVAL;
--
1.9.1
Hi Malathi,
On 10/09/2018 10:53 AM, Malathi Gottam wrote:
> Handles target type crop by setting the new active rectangle
> to hardware. The new rectangle should be within YUV size.
>
> Signed-off-by: Malathi Gottam <[email protected]>
> ---
> drivers/media/platform/qcom/venus/venc.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/platform/qcom/venus/venc.c b/drivers/media/platform/qcom/venus/venc.c
> index 3f50cd0..754c19a 100644
> --- a/drivers/media/platform/qcom/venus/venc.c
> +++ b/drivers/media/platform/qcom/venus/venc.c
> @@ -478,16 +478,31 @@ static int venc_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
> venc_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
> {
> struct venus_inst *inst = to_inst(file);
> + int ret;
> + u32 buftype;
>
> if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> return -EINVAL;
>
> switch (s->target) {
> case V4L2_SEL_TGT_CROP:
> - if (s->r.width != inst->out_width ||
> - s->r.height != inst->out_height ||
> + if (s->r.width > inst->out_width ||
> + s->r.height > inst->out_height ||
> s->r.top != 0 || s->r.left != 0)
> return -EINVAL;
> + if (s->r.width != inst->width ||
> + s->r.height != inst->height) {
> + buftype = HFI_BUFFER_OUTPUT;
> + ret = venus_helper_set_output_resolution(inst,
> + s->r.width,
> + s->r.height,
> + buftype);
I'm afraid that set_output_resolution cannot be called at any time. Do
you think we can set it after start_session?
--
regards,
Stan
On 2018-10-16 15:11, Stanimir Varbanov wrote:
> Hi Malathi,
>
> On 10/09/2018 10:53 AM, Malathi Gottam wrote:
>> Handles target type crop by setting the new active rectangle
>> to hardware. The new rectangle should be within YUV size.
>>
>> Signed-off-by: Malathi Gottam <[email protected]>
>> ---
>> drivers/media/platform/qcom/venus/venc.c | 19 +++++++++++++++++--
>> 1 file changed, 17 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/media/platform/qcom/venus/venc.c
>> b/drivers/media/platform/qcom/venus/venc.c
>> index 3f50cd0..754c19a 100644
>> --- a/drivers/media/platform/qcom/venus/venc.c
>> +++ b/drivers/media/platform/qcom/venus/venc.c
>> @@ -478,16 +478,31 @@ static int venc_g_fmt(struct file *file, void
>> *fh, struct v4l2_format *f)
>> venc_s_selection(struct file *file, void *fh, struct v4l2_selection
>> *s)
>> {
>> struct venus_inst *inst = to_inst(file);
>> + int ret;
>> + u32 buftype;
>>
>> if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
>> return -EINVAL;
>>
>> switch (s->target) {
>> case V4L2_SEL_TGT_CROP:
>> - if (s->r.width != inst->out_width ||
>> - s->r.height != inst->out_height ||
>> + if (s->r.width > inst->out_width ||
>> + s->r.height > inst->out_height ||
>> s->r.top != 0 || s->r.left != 0)
>> return -EINVAL;
>> + if (s->r.width != inst->width ||
>> + s->r.height != inst->height) {
>> + buftype = HFI_BUFFER_OUTPUT;
>> + ret = venus_helper_set_output_resolution(inst,
>> + s->r.width,
>> + s->r.height,
>> + buftype);
>
> I'm afraid that set_output_resolution cannot be called at any time. Do
> you think we can set it after start_session?
Yes Stan, we can set output_resolution after the session has been
initialization.
As per the spec, this call s_selection is an optional step under
Initialization
procedure of encoder even before we request buffers.
So I think setting output resolution in this api shouldn't cause any
issue once
we are confident on the instance state.
Hi Malathi,
On 11/1/18 3:10 PM, [email protected] wrote:
> On 2018-10-16 15:11, Stanimir Varbanov wrote:
>> Hi Malathi,
>>
>> On 10/09/2018 10:53 AM, Malathi Gottam wrote:
>>> Handles target type crop by setting the new active rectangle
>>> to hardware. The new rectangle should be within YUV size.
>>>
>>> Signed-off-by: Malathi Gottam <[email protected]>
>>> ---
>>> drivers/media/platform/qcom/venus/venc.c | 19 +++++++++++++++++--
>>> 1 file changed, 17 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/qcom/venus/venc.c
>>> b/drivers/media/platform/qcom/venus/venc.c
>>> index 3f50cd0..754c19a 100644
>>> --- a/drivers/media/platform/qcom/venus/venc.c
>>> +++ b/drivers/media/platform/qcom/venus/venc.c
>>> @@ -478,16 +478,31 @@ static int venc_g_fmt(struct file *file, void
>>> *fh, struct v4l2_format *f)
>>> venc_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
>>> {
>>> struct venus_inst *inst = to_inst(file);
>>> + int ret;
>>> + u32 buftype;
>>>
>>> if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
>>> return -EINVAL;
>>>
>>> switch (s->target) {
>>> case V4L2_SEL_TGT_CROP:
>>> - if (s->r.width != inst->out_width ||
>>> - s->r.height != inst->out_height ||
>>> + if (s->r.width > inst->out_width ||
>>> + s->r.height > inst->out_height ||
>>> s->r.top != 0 || s->r.left != 0)
>>> return -EINVAL;
>>> + if (s->r.width != inst->width ||
>>> + s->r.height != inst->height) {
>>> + buftype = HFI_BUFFER_OUTPUT;
>>> + ret = venus_helper_set_output_resolution(inst,
>>> + s->r.width,
>>> + s->r.height,
>>> + buftype);
>>
>> I'm afraid that set_output_resolution cannot be called at any time. Do
>> you think we can set it after start_session?
>
> Yes Stan, we can set output_resolution after the session has been
> initialization.
> As per the spec, this call s_selection is an optional step under
> Initialization
> procedure of encoder even before we request buffers.
What spec you are referring to? The spec for the encoders [1] or
something else.
>
> So I think setting output resolution in this api shouldn't cause any
> issue once
> we are confident on the instance state.
OK, but I want to test that on v1 and v3 as well (usually the behavior
differs between versions).
--
regards,
Stan
[1] https://patchwork.linuxtv.org/patch/52624/
On Fri, Nov 2, 2018 at 12:02 AM Stanimir Varbanov
<[email protected]> wrote:
>
> Hi Malathi,
>
> On 11/1/18 3:10 PM, [email protected] wrote:
> > On 2018-10-16 15:11, Stanimir Varbanov wrote:
> >> Hi Malathi,
> >>
> >> On 10/09/2018 10:53 AM, Malathi Gottam wrote:
> >>> Handles target type crop by setting the new active rectangle
> >>> to hardware. The new rectangle should be within YUV size.
> >>>
> >>> Signed-off-by: Malathi Gottam <[email protected]>
> >>> ---
> >>> drivers/media/platform/qcom/venus/venc.c | 19 +++++++++++++++++--
> >>> 1 file changed, 17 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/drivers/media/platform/qcom/venus/venc.c
> >>> b/drivers/media/platform/qcom/venus/venc.c
> >>> index 3f50cd0..754c19a 100644
> >>> --- a/drivers/media/platform/qcom/venus/venc.c
> >>> +++ b/drivers/media/platform/qcom/venus/venc.c
> >>> @@ -478,16 +478,31 @@ static int venc_g_fmt(struct file *file, void
> >>> *fh, struct v4l2_format *f)
> >>> venc_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
> >>> {
> >>> struct venus_inst *inst = to_inst(file);
> >>> + int ret;
> >>> + u32 buftype;
> >>>
> >>> if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
> >>> return -EINVAL;
> >>>
> >>> switch (s->target) {
> >>> case V4L2_SEL_TGT_CROP:
> >>> - if (s->r.width != inst->out_width ||
> >>> - s->r.height != inst->out_height ||
> >>> + if (s->r.width > inst->out_width ||
> >>> + s->r.height > inst->out_height ||
> >>> s->r.top != 0 || s->r.left != 0)
> >>> return -EINVAL;
Note that returning -EINVAL is not what VIDIOC_S_SELECTION should do here.
As per the general V4L2 spec [1], VIDIOC_S_SELECTION is expected to
adjust the crop rectangle "as close as possible to the requested one".
In this case that would likely mean something like this:
if (s->r.left != 0) {
s->r.width += s->r.left;
s->r.left = 0;
}
if (s->r.top != 0) {
s->r.height += s->r.top;
s->r.top = 0;
}
if (s->r.width > inst->out_width)
s->r.width = inst->out_width;
if (s->r.height > inst->out_height)
s->r.height = inst->out_height;
[1] https://www.kernel.org/doc/html/latest/media/uapi/v4l/vidioc-g-selection.html
> >>> + if (s->r.width != inst->width ||
> >>> + s->r.height != inst->height) {
> >>> + buftype = HFI_BUFFER_OUTPUT;
> >>> + ret = venus_helper_set_output_resolution(inst,
> >>> + s->r.width,
> >>> + s->r.height,
> >>> + buftype);
> >>
> >> I'm afraid that set_output_resolution cannot be called at any time. Do
> >> you think we can set it after start_session?
> >
> > Yes Stan, we can set output_resolution after the session has been
> > initialization.
> > As per the spec, this call s_selection is an optional step under
> > Initialization
> > procedure of encoder even before we request buffers.
>
> What spec you are referring to? The spec for the encoders [1] or
> something else.
For our convenience, Hans was nice enough to host a compiled version at:
https://hverkuil.home.xs4all.nl/request-api/uapi/v4l/dev-encoder.html
Best regards,
Tomasz
On 2018-11-02 03:16, Tomasz Figa wrote:
> On Fri, Nov 2, 2018 at 12:02 AM Stanimir Varbanov
> <[email protected]> wrote:
>>
>> Hi Malathi,
>>
>> On 11/1/18 3:10 PM, [email protected] wrote:
>> > On 2018-10-16 15:11, Stanimir Varbanov wrote:
>> >> Hi Malathi,
>> >>
>> >> On 10/09/2018 10:53 AM, Malathi Gottam wrote:
>> >>> Handles target type crop by setting the new active rectangle
>> >>> to hardware. The new rectangle should be within YUV size.
>> >>>
>> >>> Signed-off-by: Malathi Gottam <[email protected]>
>> >>> ---
>> >>> drivers/media/platform/qcom/venus/venc.c | 19 +++++++++++++++++--
>> >>> 1 file changed, 17 insertions(+), 2 deletions(-)
>> >>>
>> >>> diff --git a/drivers/media/platform/qcom/venus/venc.c
>> >>> b/drivers/media/platform/qcom/venus/venc.c
>> >>> index 3f50cd0..754c19a 100644
>> >>> --- a/drivers/media/platform/qcom/venus/venc.c
>> >>> +++ b/drivers/media/platform/qcom/venus/venc.c
>> >>> @@ -478,16 +478,31 @@ static int venc_g_fmt(struct file *file, void
>> >>> *fh, struct v4l2_format *f)
>> >>> venc_s_selection(struct file *file, void *fh, struct v4l2_selection *s)
>> >>> {
>> >>> struct venus_inst *inst = to_inst(file);
>> >>> + int ret;
>> >>> + u32 buftype;
>> >>>
>> >>> if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
>> >>> return -EINVAL;
>> >>>
>> >>> switch (s->target) {
>> >>> case V4L2_SEL_TGT_CROP:
>> >>> - if (s->r.width != inst->out_width ||
>> >>> - s->r.height != inst->out_height ||
>> >>> + if (s->r.width > inst->out_width ||
>> >>> + s->r.height > inst->out_height ||
>> >>> s->r.top != 0 || s->r.left != 0)
>> >>> return -EINVAL;
>
> Note that returning -EINVAL is not what VIDIOC_S_SELECTION should do
> here.
>
> As per the general V4L2 spec [1], VIDIOC_S_SELECTION is expected to
> adjust the crop rectangle "as close as possible to the requested one".
> In this case that would likely mean something like this:
>
> if (s->r.left != 0) {
> s->r.width += s->r.left;
> s->r.left = 0;
> }
>
> if (s->r.top != 0) {
> s->r.height += s->r.top;
> s->r.top = 0;
> }
>
> if (s->r.width > inst->out_width)
> s->r.width = inst->out_width;
>
> if (s->r.height > inst->out_height)
> s->r.height = inst->out_height;
>
> [1]
> https://www.kernel.org/doc/html/latest/media/uapi/v4l/vidioc-g-selection.html
>
Yes Tomasz, I overlooked the spec that we cannot return EINVAL in this
case.
I will make the necessary changes and update the new patch.
>> >>> + if (s->r.width != inst->width ||
>> >>> + s->r.height != inst->height) {
>> >>> + buftype = HFI_BUFFER_OUTPUT;
>> >>> + ret = venus_helper_set_output_resolution(inst,
>> >>> + s->r.width,
>> >>> + s->r.height,
>> >>> + buftype);
>> >>
>> >> I'm afraid that set_output_resolution cannot be called at any time. Do
>> >> you think we can set it after start_session?
>> >
>> > Yes Stan, we can set output_resolution after the session has been
>> > initialization.
>> > As per the spec, this call s_selection is an optional step under
>> > Initialization
>> > procedure of encoder even before we request buffers.
Setting this output resolution here I feel it as a repetition as we
have this width and height set to firmware as a part of
VIDIOC_REQBUFS().
So updating the selection rectangle would be sufficient in this case.
>>
>> What spec you are referring to? The spec for the encoders [1] or
>> something else.
>
> For our convenience, Hans was nice enough to host a compiled version
> at:
> https://hverkuil.home.xs4all.nl/request-api/uapi/v4l/dev-encoder.html
>
> Best regards,
> Tomasz