Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <[email protected]>
---
.../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
.../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
.../display/bridge/toshiba,tc358767.yaml | 2 +-
.../bindings/display/dp-aux-bus.yaml | 2 +-
.../display/mediatek/mediatek,hdmi.yaml | 2 +-
.../display/msm/dsi-controller-main.yaml | 8 ++++----
.../bindings/display/msm/dsi-phy-10nm.yaml | 2 +-
.../bindings/display/panel/ronbo,rb070d30.yaml | 2 +-
.../bindings/display/renesas,du.yaml | 4 ++--
.../display/tegra/nvidia,tegra114-mipi.yaml | 2 +-
.../display/tegra/nvidia,tegra124-sor.yaml | 12 ++++++------
.../display/tegra/nvidia,tegra186-dc.yaml | 4 ++--
.../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +-
.../display/tegra/nvidia,tegra20-dsi.yaml | 12 ++++++------
.../display/tegra/nvidia,tegra20-hdmi.yaml | 6 +++---
.../bindings/display/ti/ti,am65x-dss.yaml | 2 +-
.../display/xylon,logicvc-display.yaml | 18 +++++++++---------
17 files changed, 42 insertions(+), 42 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index fc4873deb76f..4f6ffb8182a9 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -10,7 +10,7 @@ maintainers:
- Robin van der Gracht <[email protected]>
allOf:
- - $ref: "/schemas/input/matrix-keymap.yaml#"
+ - $ref: /schemas/input/matrix-keymap.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
index 107dd138e6c6..cdeb67bc05f0 100644
--- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -18,7 +18,7 @@ properties:
maxItems: 1
edid-emulation:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
The EDID emulation entry to use
Value Resolution Description
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index 140927884418..e1494b5007cb 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -23,7 +23,7 @@ properties:
i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
clock-names:
- const: "ref"
+ const: ref
clocks:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
index 5e4afe9f98fb..0ece7b01790b 100644
--- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
+++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
@@ -26,7 +26,7 @@ description:
properties:
$nodename:
- const: "aux-bus"
+ const: aux-bus
panel:
$ref: panel/panel-common.yaml#
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
index 8afdd67d6780..b90b6d18a828 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
@@ -50,7 +50,7 @@ properties:
- const: hdmi
mediatek,syscon-hdmi:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
- items:
- description: phandle to system configuration registers
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
index e75a3efe4dac..2188d7c9b0bb 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
@@ -74,7 +74,7 @@ properties:
syscon-sfpb:
description: A phandle to mmss_sfpb syscon node (only for DSIv2).
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
qcom,dual-dsi-mode:
type: boolean
@@ -105,14 +105,14 @@ properties:
type: object
ports:
- $ref: "/schemas/graph.yaml#/properties/ports"
+ $ref: /schemas/graph.yaml#/properties/ports
description: |
Contains DSI controller input and output ports as children, each
containing one endpoint subnode.
properties:
port@0:
- $ref: "/schemas/graph.yaml#/$defs/port-base"
+ $ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: |
Input endpoints of the controller.
@@ -128,7 +128,7 @@ properties:
enum: [ 0, 1, 2, 3 ]
port@1:
- $ref: "/schemas/graph.yaml#/$defs/port-base"
+ $ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description: |
Output endpoints of the controller.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
index 3ec466c3ab38..e6b00d7387ce 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -58,7 +58,7 @@ properties:
maximum: 31
qcom,phy-drive-ldo-level:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description:
The PHY LDO has an amplitude tuning feature to adjust the LDO output
for the HSTX drive. Use supported levels (mV) to offset the drive level
diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
index d67617f6f74a..95ce22c6787a 100644
--- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
+++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
@@ -37,7 +37,7 @@ properties:
backlight:
description: Backlight used by the panel
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
index d4830f52c512..c5b9e6812bce 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.yaml
+++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
@@ -76,7 +76,7 @@ properties:
unevaluatedProperties: false
renesas,cmms:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
maxItems: 1
description:
@@ -84,7 +84,7 @@ properties:
available DU channel.
renesas,vsps:
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
items:
items:
- description: phandle to VSP instance that serves the DU channel
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
index d5ca8cf86e8e..f448624dd779 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
@@ -38,7 +38,7 @@ properties:
description: The number of cells in a MIPI calibration specifier.
Should be 1. The single cell specifies a bitmask of the pads that
need to be calibrated for a given device.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
const: 1
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
index 907fb0baccae..70f0e45c71d6 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
@@ -69,12 +69,12 @@ properties:
# Tegra186 and later
nvidia,interface:
description: index of the SOR interface
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
nvidia,ddc-i2c-bus:
description: phandle of an I2C controller used for DDC EDID
probing
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,hpd-gpio:
description: specifies a GPIO used for hotplug detection
@@ -82,23 +82,23 @@ properties:
nvidia,edid:
description: supplies a binary EDID blob
- $ref: "/schemas/types.yaml#/definitions/uint8-array"
+ $ref: /schemas/types.yaml#/definitions/uint8-array
nvidia,panel:
description: phandle of a display panel, required for eDP
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,xbar-cfg:
description: 5 cells containing the crossbar configuration.
Each lane of the SOR, identified by the cell's index, is
mapped via the crossbar to the pad specified by the cell's
value.
- $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ $ref: /schemas/types.yaml#/definitions/uint32-array
# optional when driving an eDP output
nvidia,dpaux:
description: phandle to a DispayPort AUX interface
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
index 265a60d79d89..ce4589466a18 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
@@ -60,13 +60,13 @@ properties:
nvidia,outputs:
description: A list of phandles of outputs that this display
controller can drive.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
nvidia,head:
description: The number of the display controller head. This
is used to setup the various types of output to receive
video data from the given head.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
index e5a6145c8c53..da75b71e8ece 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
@@ -29,7 +29,7 @@ properties:
- const: dsi
allOf:
- - $ref: "/schemas/reset/reset.yaml"
+ - $ref: /schemas/reset/reset.yaml
additionalProperties: false
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
index 511cbe74e729..59e1dc0813e7 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
@@ -59,12 +59,12 @@ properties:
description: Should contain a phandle and a specifier specifying
which pads are used by this DSI output and need to be
calibrated. See nvidia,tegra114-mipi.yaml for details.
- $ref: "/schemas/types.yaml#/definitions/phandle-array"
+ $ref: /schemas/types.yaml#/definitions/phandle-array
nvidia,ddc-i2c-bus:
description: phandle of an I2C controller used for DDC EDID
probing
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,hpd-gpio:
description: specifies a GPIO used for hotplug detection
@@ -72,19 +72,19 @@ properties:
nvidia,edid:
description: supplies a binary EDID blob
- $ref: "/schemas/types.yaml#/definitions/uint8-array"
+ $ref: /schemas/types.yaml#/definitions/uint8-array
nvidia,panel:
description: phandle of a display panel
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,ganged-mode:
description: contains a phandle to a second DSI controller to
gang up with in order to support up to 8 data lanes
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
allOf:
- - $ref: "../dsi-controller.yaml#"
+ - $ref: ../dsi-controller.yaml#
- if:
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
index f65e59cfffa7..f77197e4869f 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
@@ -68,7 +68,7 @@ properties:
nvidia,ddc-i2c-bus:
description: phandle of an I2C controller used for DDC EDID
probing
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
nvidia,hpd-gpio:
description: specifies a GPIO used for hotplug detection
@@ -76,11 +76,11 @@ properties:
nvidia,edid:
description: supplies a binary EDID blob
- $ref: "/schemas/types.yaml#/definitions/uint8-array"
+ $ref: /schemas/types.yaml#/definitions/uint8-array
nvidia,panel:
description: phandle of a display panel
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
"#sound-dai-cells":
const: 0
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 5c7d2cbc4aac..4247280d6c3c 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -88,7 +88,7 @@ properties:
The DSS DPI output port node from video port 2
ti,am65x-oldi-io-ctrl:
- $ref: "/schemas/types.yaml#/definitions/phandle"
+ $ref: /schemas/types.yaml#/definitions/phandle
description:
phandle to syscon device node mapping OLDI IO_CTRL registers.
The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
index fc02c5d50ce4..87404d72ea37 100644
--- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
@@ -89,25 +89,25 @@ properties:
description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
xylon,display-depth:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Display output depth (C_PIXEL_DATA_WIDTH).
xylon,row-stride:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
xylon,dithering:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: Dithering module is enabled (C_XCOLOR)
xylon,background-layer:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: |
The last layer is used to display a black background (C_USE_BACKGROUND).
The layer must still be registered.
xylon,layers-configurable:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: |
Configuration of layers' size, position and offset is enabled
(C_USE_SIZE_POSITION).
@@ -131,7 +131,7 @@ properties:
maxItems: 1
xylon,layer-depth:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: Layer depth (C_LAYER_X_DATA_WIDTH).
xylon,layer-colorspace:
@@ -151,19 +151,19 @@ properties:
description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
xylon,layer-base-offset:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Offset in number of lines (C_LAYER_X_OFFSET) starting from the
video RAM base (C_VMEM_BASEADDR), only for version 3.
xylon,layer-buffer-offset:
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
description: |
Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
layer base offset for the second buffer used in double-buffering.
xylon,layer-primary:
- $ref: "/schemas/types.yaml#/definitions/flag"
+ $ref: /schemas/types.yaml#/definitions/flag
description: |
Layer should be registered as a primary plane (exactly one is
required).
--
2.39.2
Hi Rob,
Thank you for the patch.
On Fri, Mar 17, 2023 at 06:36:24PM -0500, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
> ---
> .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
> .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
> .../display/bridge/toshiba,tc358767.yaml | 2 +-
> .../bindings/display/dp-aux-bus.yaml | 2 +-
> .../display/mediatek/mediatek,hdmi.yaml | 2 +-
> .../display/msm/dsi-controller-main.yaml | 8 ++++----
> .../bindings/display/msm/dsi-phy-10nm.yaml | 2 +-
> .../bindings/display/panel/ronbo,rb070d30.yaml | 2 +-
> .../bindings/display/renesas,du.yaml | 4 ++--
> .../display/tegra/nvidia,tegra114-mipi.yaml | 2 +-
> .../display/tegra/nvidia,tegra124-sor.yaml | 12 ++++++------
> .../display/tegra/nvidia,tegra186-dc.yaml | 4 ++--
> .../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +-
> .../display/tegra/nvidia,tegra20-dsi.yaml | 12 ++++++------
> .../display/tegra/nvidia,tegra20-hdmi.yaml | 6 +++---
> .../bindings/display/ti/ti,am65x-dss.yaml | 2 +-
> .../display/xylon,logicvc-display.yaml | 18 +++++++++---------
> 17 files changed, 42 insertions(+), 42 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> index fc4873deb76f..4f6ffb8182a9 100644
> --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> @@ -10,7 +10,7 @@ maintainers:
> - Robin van der Gracht <[email protected]>
>
> allOf:
> - - $ref: "/schemas/input/matrix-keymap.yaml#"
> + - $ref: /schemas/input/matrix-keymap.yaml#
>
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> index 107dd138e6c6..cdeb67bc05f0 100644
> --- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> @@ -18,7 +18,7 @@ properties:
> maxItems: 1
>
> edid-emulation:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The EDID emulation entry to use
> Value Resolution Description
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> index 140927884418..e1494b5007cb 100644
> --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> @@ -23,7 +23,7 @@ properties:
> i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
>
> clock-names:
> - const: "ref"
> + const: ref
>
> clocks:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> index 5e4afe9f98fb..0ece7b01790b 100644
> --- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> +++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> @@ -26,7 +26,7 @@ description:
>
> properties:
> $nodename:
> - const: "aux-bus"
> + const: aux-bus
>
> panel:
> $ref: panel/panel-common.yaml#
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> index 8afdd67d6780..b90b6d18a828 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> @@ -50,7 +50,7 @@ properties:
> - const: hdmi
>
> mediatek,syscon-hdmi:
> - $ref: '/schemas/types.yaml#/definitions/phandle-array'
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: phandle to system configuration registers
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> index e75a3efe4dac..2188d7c9b0bb 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> @@ -74,7 +74,7 @@ properties:
>
> syscon-sfpb:
> description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> qcom,dual-dsi-mode:
> type: boolean
> @@ -105,14 +105,14 @@ properties:
> type: object
>
> ports:
> - $ref: "/schemas/graph.yaml#/properties/ports"
> + $ref: /schemas/graph.yaml#/properties/ports
> description: |
> Contains DSI controller input and output ports as children, each
> containing one endpoint subnode.
>
> properties:
> port@0:
> - $ref: "/schemas/graph.yaml#/$defs/port-base"
> + $ref: /schemas/graph.yaml#/$defs/port-base
> unevaluatedProperties: false
> description: |
> Input endpoints of the controller.
> @@ -128,7 +128,7 @@ properties:
> enum: [ 0, 1, 2, 3 ]
>
> port@1:
> - $ref: "/schemas/graph.yaml#/$defs/port-base"
> + $ref: /schemas/graph.yaml#/$defs/port-base
> unevaluatedProperties: false
> description: |
> Output endpoints of the controller.
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> index 3ec466c3ab38..e6b00d7387ce 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> @@ -58,7 +58,7 @@ properties:
> maximum: 31
>
> qcom,phy-drive-ldo-level:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The PHY LDO has an amplitude tuning feature to adjust the LDO output
> for the HSTX drive. Use supported levels (mV) to offset the drive level
> diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> index d67617f6f74a..95ce22c6787a 100644
> --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> @@ -37,7 +37,7 @@ properties:
>
> backlight:
> description: Backlight used by the panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
> index d4830f52c512..c5b9e6812bce 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.yaml
> +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
> @@ -76,7 +76,7 @@ properties:
> unevaluatedProperties: false
>
> renesas,cmms:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> maxItems: 1
> description:
> @@ -84,7 +84,7 @@ properties:
> available DU channel.
>
> renesas,vsps:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> items:
> - description: phandle to VSP instance that serves the DU channel
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> index d5ca8cf86e8e..f448624dd779 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> @@ -38,7 +38,7 @@ properties:
> description: The number of cells in a MIPI calibration specifier.
> Should be 1. The single cell specifies a bitmask of the pads that
> need to be calibrated for a given device.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> const: 1
>
> additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> index 907fb0baccae..70f0e45c71d6 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> @@ -69,12 +69,12 @@ properties:
> # Tegra186 and later
> nvidia,interface:
> description: index of the SOR interface
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -82,23 +82,23 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel, required for eDP
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,xbar-cfg:
> description: 5 cells containing the crossbar configuration.
> Each lane of the SOR, identified by the cell's index, is
> mapped via the crossbar to the pad specified by the cell's
> value.
> - $ref: "/schemas/types.yaml#/definitions/uint32-array"
> + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> # optional when driving an eDP output
> nvidia,dpaux:
> description: phandle to a DispayPort AUX interface
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - if:
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> index 265a60d79d89..ce4589466a18 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> @@ -60,13 +60,13 @@ properties:
> nvidia,outputs:
> description: A list of phandles of outputs that this display
> controller can drive.
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
>
> nvidia,head:
> description: The number of the display controller head. This
> is used to setup the various types of output to receive
> video data from the given head.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> index e5a6145c8c53..da75b71e8ece 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> @@ -29,7 +29,7 @@ properties:
> - const: dsi
>
> allOf:
> - - $ref: "/schemas/reset/reset.yaml"
> + - $ref: /schemas/reset/reset.yaml
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> index 511cbe74e729..59e1dc0813e7 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> @@ -59,12 +59,12 @@ properties:
> description: Should contain a phandle and a specifier specifying
> which pads are used by this DSI output and need to be
> calibrated. See nvidia,tegra114-mipi.yaml for details.
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
>
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -72,19 +72,19 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,ganged-mode:
> description: contains a phandle to a second DSI controller to
> gang up with in order to support up to 8 data lanes
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - - $ref: "../dsi-controller.yaml#"
> + - $ref: ../dsi-controller.yaml#
> - if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> index f65e59cfffa7..f77197e4869f 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> @@ -68,7 +68,7 @@ properties:
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -76,11 +76,11 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> "#sound-dai-cells":
> const: 0
> diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> index 5c7d2cbc4aac..4247280d6c3c 100644
> --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> @@ -88,7 +88,7 @@ properties:
> The DSS DPI output port node from video port 2
>
> ti,am65x-oldi-io-ctrl:
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
> description:
> phandle to syscon device node mapping OLDI IO_CTRL registers.
> The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
> diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> index fc02c5d50ce4..87404d72ea37 100644
> --- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> @@ -89,25 +89,25 @@ properties:
> description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
>
> xylon,display-depth:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Display output depth (C_PIXEL_DATA_WIDTH).
>
> xylon,row-stride:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
>
> xylon,dithering:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: Dithering module is enabled (C_XCOLOR)
>
> xylon,background-layer:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> The last layer is used to display a black background (C_USE_BACKGROUND).
> The layer must still be registered.
>
> xylon,layers-configurable:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> Configuration of layers' size, position and offset is enabled
> (C_USE_SIZE_POSITION).
> @@ -131,7 +131,7 @@ properties:
> maxItems: 1
>
> xylon,layer-depth:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Layer depth (C_LAYER_X_DATA_WIDTH).
>
> xylon,layer-colorspace:
> @@ -151,19 +151,19 @@ properties:
> description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
>
> xylon,layer-base-offset:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: |
> Offset in number of lines (C_LAYER_X_OFFSET) starting from the
> video RAM base (C_VMEM_BASEADDR), only for version 3.
>
> xylon,layer-buffer-offset:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: |
> Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
> layer base offset for the second buffer used in double-buffering.
>
> xylon,layer-primary:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> Layer should be registered as a primary plane (exactly one is
> required).
--
Regards,
Laurent Pinchart
On 18/03/2023 00:36, Rob Herring wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
Hi, Rob:
Rob Herring <[email protected]> 於 2023年3月18日 週六 上午7:36寫道：
>
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
For MediaTek part,
Reviewed-by: Chun-Kuang Hu <[email protected]>
>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
> .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
> .../display/bridge/toshiba,tc358767.yaml | 2 +-
> .../bindings/display/dp-aux-bus.yaml | 2 +-
> .../display/mediatek/mediatek,hdmi.yaml | 2 +-
> .../display/msm/dsi-controller-main.yaml | 8 ++++----
> .../bindings/display/msm/dsi-phy-10nm.yaml | 2 +-
> .../bindings/display/panel/ronbo,rb070d30.yaml | 2 +-
> .../bindings/display/renesas,du.yaml | 4 ++--
> .../display/tegra/nvidia,tegra114-mipi.yaml | 2 +-
> .../display/tegra/nvidia,tegra124-sor.yaml | 12 ++++++------
> .../display/tegra/nvidia,tegra186-dc.yaml | 4 ++--
> .../tegra/nvidia,tegra186-dsi-padctl.yaml | 2 +-
> .../display/tegra/nvidia,tegra20-dsi.yaml | 12 ++++++------
> .../display/tegra/nvidia,tegra20-hdmi.yaml | 6 +++---
> .../bindings/display/ti/ti,am65x-dss.yaml | 2 +-
> .../display/xylon,logicvc-display.yaml | 18 +++++++++---------
> 17 files changed, 42 insertions(+), 42 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> index fc4873deb76f..4f6ffb8182a9 100644
> --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> @@ -10,7 +10,7 @@ maintainers:
> - Robin van der Gracht <[email protected]>
>
> allOf:
> - - $ref: "/schemas/input/matrix-keymap.yaml#"
> + - $ref: /schemas/input/matrix-keymap.yaml#
>
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> index 107dd138e6c6..cdeb67bc05f0 100644
> --- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
> @@ -18,7 +18,7 @@ properties:
> maxItems: 1
>
> edid-emulation:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The EDID emulation entry to use
> Value Resolution Description
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> index 140927884418..e1494b5007cb 100644
> --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
> @@ -23,7 +23,7 @@ properties:
> i2c address of the bridge, 0x68 or 0x0f, depending on bootstrap pins
>
> clock-names:
> - const: "ref"
> + const: ref
>
> clocks:
> maxItems: 1
> diff --git a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> index 5e4afe9f98fb..0ece7b01790b 100644
> --- a/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> +++ b/Documentation/devicetree/bindings/display/dp-aux-bus.yaml
> @@ -26,7 +26,7 @@ description:
>
> properties:
> $nodename:
> - const: "aux-bus"
> + const: aux-bus
>
> panel:
> $ref: panel/panel-common.yaml#
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> index 8afdd67d6780..b90b6d18a828 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,hdmi.yaml
> @@ -50,7 +50,7 @@ properties:
> - const: hdmi
>
> mediatek,syscon-hdmi:
> - $ref: '/schemas/types.yaml#/definitions/phandle-array'
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> - items:
> - description: phandle to system configuration registers
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> index e75a3efe4dac..2188d7c9b0bb 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
> @@ -74,7 +74,7 @@ properties:
>
> syscon-sfpb:
> description: A phandle to mmss_sfpb syscon node (only for DSIv2).
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> qcom,dual-dsi-mode:
> type: boolean
> @@ -105,14 +105,14 @@ properties:
> type: object
>
> ports:
> - $ref: "/schemas/graph.yaml#/properties/ports"
> + $ref: /schemas/graph.yaml#/properties/ports
> description: |
> Contains DSI controller input and output ports as children, each
> containing one endpoint subnode.
>
> properties:
> port@0:
> - $ref: "/schemas/graph.yaml#/$defs/port-base"
> + $ref: /schemas/graph.yaml#/$defs/port-base
> unevaluatedProperties: false
> description: |
> Input endpoints of the controller.
> @@ -128,7 +128,7 @@ properties:
> enum: [ 0, 1, 2, 3 ]
>
> port@1:
> - $ref: "/schemas/graph.yaml#/$defs/port-base"
> + $ref: /schemas/graph.yaml#/$defs/port-base
> unevaluatedProperties: false
> description: |
> Output endpoints of the controller.
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> index 3ec466c3ab38..e6b00d7387ce 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> @@ -58,7 +58,7 @@ properties:
> maximum: 31
>
> qcom,phy-drive-ldo-level:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description:
> The PHY LDO has an amplitude tuning feature to adjust the LDO output
> for the HSTX drive. Use supported levels (mV) to offset the drive level
> diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> index d67617f6f74a..95ce22c6787a 100644
> --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> @@ -37,7 +37,7 @@ properties:
>
> backlight:
> description: Backlight used by the panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> required:
> - compatible
> diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml
> index d4830f52c512..c5b9e6812bce 100644
> --- a/Documentation/devicetree/bindings/display/renesas,du.yaml
> +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml
> @@ -76,7 +76,7 @@ properties:
> unevaluatedProperties: false
>
> renesas,cmms:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> maxItems: 1
> description:
> @@ -84,7 +84,7 @@ properties:
> available DU channel.
>
> renesas,vsps:
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> items:
> items:
> - description: phandle to VSP instance that serves the DU channel
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> index d5ca8cf86e8e..f448624dd779 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra114-mipi.yaml
> @@ -38,7 +38,7 @@ properties:
> description: The number of cells in a MIPI calibration specifier.
> Should be 1. The single cell specifies a bitmask of the pads that
> need to be calibrated for a given device.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> const: 1
>
> additionalProperties: false
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> index 907fb0baccae..70f0e45c71d6 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra124-sor.yaml
> @@ -69,12 +69,12 @@ properties:
> # Tegra186 and later
> nvidia,interface:
> description: index of the SOR interface
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -82,23 +82,23 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel, required for eDP
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,xbar-cfg:
> description: 5 cells containing the crossbar configuration.
> Each lane of the SOR, identified by the cell's index, is
> mapped via the crossbar to the pad specified by the cell's
> value.
> - $ref: "/schemas/types.yaml#/definitions/uint32-array"
> + $ref: /schemas/types.yaml#/definitions/uint32-array
>
> # optional when driving an eDP output
> nvidia,dpaux:
> description: phandle to a DispayPort AUX interface
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - if:
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> index 265a60d79d89..ce4589466a18 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dc.yaml
> @@ -60,13 +60,13 @@ properties:
> nvidia,outputs:
> description: A list of phandles of outputs that this display
> controller can drive.
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
>
> nvidia,head:
> description: The number of the display controller head. This
> is used to setup the various types of output to receive
> video data from the given head.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> index e5a6145c8c53..da75b71e8ece 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra186-dsi-padctl.yaml
> @@ -29,7 +29,7 @@ properties:
> - const: dsi
>
> allOf:
> - - $ref: "/schemas/reset/reset.yaml"
> + - $ref: /schemas/reset/reset.yaml
>
> additionalProperties: false
>
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> index 511cbe74e729..59e1dc0813e7 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-dsi.yaml
> @@ -59,12 +59,12 @@ properties:
> description: Should contain a phandle and a specifier specifying
> which pads are used by this DSI output and need to be
> calibrated. See nvidia,tegra114-mipi.yaml for details.
> - $ref: "/schemas/types.yaml#/definitions/phandle-array"
> + $ref: /schemas/types.yaml#/definitions/phandle-array
>
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -72,19 +72,19 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,ganged-mode:
> description: contains a phandle to a second DSI controller to
> gang up with in order to support up to 8 data lanes
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> allOf:
> - - $ref: "../dsi-controller.yaml#"
> + - $ref: ../dsi-controller.yaml#
> - if:
> properties:
> compatible:
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> index f65e59cfffa7..f77197e4869f 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-hdmi.yaml
> @@ -68,7 +68,7 @@ properties:
> nvidia,ddc-i2c-bus:
> description: phandle of an I2C controller used for DDC EDID
> probing
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> nvidia,hpd-gpio:
> description: specifies a GPIO used for hotplug detection
> @@ -76,11 +76,11 @@ properties:
>
> nvidia,edid:
> description: supplies a binary EDID blob
> - $ref: "/schemas/types.yaml#/definitions/uint8-array"
> + $ref: /schemas/types.yaml#/definitions/uint8-array
>
> nvidia,panel:
> description: phandle of a display panel
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
>
> "#sound-dai-cells":
> const: 0
> diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> index 5c7d2cbc4aac..4247280d6c3c 100644
> --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
> @@ -88,7 +88,7 @@ properties:
> The DSS DPI output port node from video port 2
>
> ti,am65x-oldi-io-ctrl:
> - $ref: "/schemas/types.yaml#/definitions/phandle"
> + $ref: /schemas/types.yaml#/definitions/phandle
> description:
> phandle to syscon device node mapping OLDI IO_CTRL registers.
> The mapped range should point to OLDI_DAT0_IO_CTRL, map it and
> diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> index fc02c5d50ce4..87404d72ea37 100644
> --- a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> +++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
> @@ -89,25 +89,25 @@ properties:
> description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
>
> xylon,display-depth:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Display output depth (C_PIXEL_DATA_WIDTH).
>
> xylon,row-stride:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
>
> xylon,dithering:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: Dithering module is enabled (C_XCOLOR)
>
> xylon,background-layer:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> The last layer is used to display a black background (C_USE_BACKGROUND).
> The layer must still be registered.
>
> xylon,layers-configurable:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> Configuration of layers' size, position and offset is enabled
> (C_USE_SIZE_POSITION).
> @@ -131,7 +131,7 @@ properties:
> maxItems: 1
>
> xylon,layer-depth:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: Layer depth (C_LAYER_X_DATA_WIDTH).
>
> xylon,layer-colorspace:
> @@ -151,19 +151,19 @@ properties:
> description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
>
> xylon,layer-base-offset:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: |
> Offset in number of lines (C_LAYER_X_OFFSET) starting from the
> video RAM base (C_VMEM_BASEADDR), only for version 3.
>
> xylon,layer-buffer-offset:
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> description: |
> Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
> layer base offset for the second buffer used in double-buffering.
>
> xylon,layer-primary:
> - $ref: "/schemas/types.yaml#/definitions/flag"
> + $ref: /schemas/types.yaml#/definitions/flag
> description: |
> Layer should be registered as a primary plane (exactly one is
> required).
> --
> 2.39.2
>