Implement kvm check vmid and update vmid, the vmid should be checked before
vcpu enter guest.
Reviewed-by: Bibo Mao <[email protected]>
Signed-off-by: Tianrui Zhao <[email protected]>
---
arch/loongarch/kvm/vmid.c | 66 +++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
create mode 100644 arch/loongarch/kvm/vmid.c
diff --git a/arch/loongarch/kvm/vmid.c b/arch/loongarch/kvm/vmid.c
new file mode 100644
index 0000000000..fc25ddc3b7
--- /dev/null
+++ b/arch/loongarch/kvm/vmid.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020-2023 Loongson Technology Corporation Limited
+ */
+
+#include <linux/kvm_host.h>
+#include "trace.h"
+
+static void _kvm_update_vpid(struct kvm_vcpu *vcpu, int cpu)
+{
+ struct kvm_context *context;
+ unsigned long vpid;
+
+ context = per_cpu_ptr(vcpu->kvm->arch.vmcs, cpu);
+ vpid = context->vpid_cache + 1;
+ if (!(vpid & vpid_mask)) {
+ /* finish round of 64 bit loop */
+ if (unlikely(!vpid))
+ vpid = vpid_mask + 1;
+
+ /* vpid 0 reserved for root */
+ ++vpid;
+
+ /* start new vpid cycle */
+ kvm_flush_tlb_all();
+ }
+
+ context->vpid_cache = vpid;
+ vcpu->arch.vpid = vpid;
+}
+
+void _kvm_check_vmid(struct kvm_vcpu *vcpu)
+{
+ struct kvm_context *context;
+ bool migrated;
+ unsigned long ver, old, vpid;
+ int cpu;
+
+ cpu = smp_processor_id();
+ /*
+ * Are we entering guest context on a different CPU to last time?
+ * If so, the vCPU's guest TLB state on this CPU may be stale.
+ */
+ context = per_cpu_ptr(vcpu->kvm->arch.vmcs, cpu);
+ migrated = (vcpu->cpu != cpu);
+
+ /*
+ * Check if our vpid is of an older version
+ *
+ * We also discard the stored vpid if we've executed on
+ * another CPU, as the guest mappings may have changed without
+ * hypervisor knowledge.
+ */
+ ver = vcpu->arch.vpid & ~vpid_mask;
+ old = context->vpid_cache & ~vpid_mask;
+ if (migrated || (ver != old)) {
+ _kvm_update_vpid(vcpu, cpu);
+ trace_kvm_vpid_change(vcpu, vcpu->arch.vpid);
+ vcpu->cpu = cpu;
+ }
+
+ /* Restore GSTAT(0x50).vpid */
+ vpid = (vcpu->arch.vpid & vpid_mask)
+ << CSR_GSTAT_GID_SHIFT;
+ change_csr_gstat(vpid_mask << CSR_GSTAT_GID_SHIFT, vpid);
+}
--
2.27.0
On Mon, Sep 11, 2023 at 6:23 PM bibo mao <[email protected]> wrote:
>
>
>
> 在 2023/9/11 18:00, Huacai Chen 写道:
> > Hi, Tianrui,
> >
> > On Thu, Aug 31, 2023 at 4:30 PM Tianrui Zhao <[email protected]> wrote:
> >>
> >> Implement kvm check vmid and update vmid, the vmid should be checked before
> >> vcpu enter guest.
> >>
> >> Reviewed-by: Bibo Mao <[email protected]>
> >> Signed-off-by: Tianrui Zhao <[email protected]>
> >> ---
> >> arch/loongarch/kvm/vmid.c | 66 +++++++++++++++++++++++++++++++++++++++
> >> 1 file changed, 66 insertions(+)
> >> create mode 100644 arch/loongarch/kvm/vmid.c
> >>
> >> diff --git a/arch/loongarch/kvm/vmid.c b/arch/loongarch/kvm/vmid.c
> >> new file mode 100644
> >> index 0000000000..fc25ddc3b7
> >> --- /dev/null
> >> +++ b/arch/loongarch/kvm/vmid.c
> >> @@ -0,0 +1,66 @@
> >> +// SPDX-License-Identifier: GPL-2.0
> >> +/*
> >> + * Copyright (C) 2020-2023 Loongson Technology Corporation Limited
> >> + */
> >> +
> >> +#include <linux/kvm_host.h>
> >> +#include "trace.h"
> >> +
> >> +static void _kvm_update_vpid(struct kvm_vcpu *vcpu, int cpu)
> >> +{
> >> + struct kvm_context *context;
> >> + unsigned long vpid;
> >> +
> >> + context = per_cpu_ptr(vcpu->kvm->arch.vmcs, cpu);
> >> + vpid = context->vpid_cache + 1;
> >> + if (!(vpid & vpid_mask)) {
> >> + /* finish round of 64 bit loop */
> >> + if (unlikely(!vpid))
> >> + vpid = vpid_mask + 1;
> >> +
> >> + /* vpid 0 reserved for root */
> >> + ++vpid;
> >> +
> >> + /* start new vpid cycle */
> >> + kvm_flush_tlb_all();
> >> + }
> >> +
> >> + context->vpid_cache = vpid;
> >> + vcpu->arch.vpid = vpid;
> >> +}
> >> +
> >> +void _kvm_check_vmid(struct kvm_vcpu *vcpu)
> >> +{
> >> + struct kvm_context *context;
> >> + bool migrated;
> >> + unsigned long ver, old, vpid;
> >> + int cpu;
> >> +
> >> + cpu = smp_processor_id();
> >> + /*
> >> + * Are we entering guest context on a different CPU to last time?
> >> + * If so, the vCPU's guest TLB state on this CPU may be stale.
> >> + */
> >> + context = per_cpu_ptr(vcpu->kvm->arch.vmcs, cpu);
> >> + migrated = (vcpu->cpu != cpu);
> >> +
> >> + /*
> >> + * Check if our vpid is of an older version
> >> + *
> >> + * We also discard the stored vpid if we've executed on
> >> + * another CPU, as the guest mappings may have changed without
> >> + * hypervisor knowledge.
> >> + */
> >> + ver = vcpu->arch.vpid & ~vpid_mask;
> >> + old = context->vpid_cache & ~vpid_mask;
> >> + if (migrated || (ver != old)) {
> >> + _kvm_update_vpid(vcpu, cpu);
> >> + trace_kvm_vpid_change(vcpu, vcpu->arch.vpid);
> >> + vcpu->cpu = cpu;
> >> + }
> >> +
> >> + /* Restore GSTAT(0x50).vpid */
> >> + vpid = (vcpu->arch.vpid & vpid_mask)
> >> + << CSR_GSTAT_GID_SHIFT;
> >> + change_csr_gstat(vpid_mask << CSR_GSTAT_GID_SHIFT, vpid);
> >> +}
> > I believe that vpid and vmid are both GID in the gstat register, so
> > please unify their names. And I think vpid is better than vmid.
>
> For processor 3A5000 vpid is the same with vmid, with next generation processor
> like 3A6000, it is seperated. vpid is for vcpu specific and represents
> translation from gva to gpa; vmid is the whole vm and represents translation
> from gpa to hpa, all vcpus shares the same vmid, so that tlb indexed with vpid
> will be still in effective when flushing shadow tlbs indexed with vmid.
>
> Only that VM patch for 3A6000 is not submitted now, generation method for
> vpid and vmid will be much different. It is prepared for future processor
> update :)
If so, then I think there should be a 'vmid' in kvm_arch and a 'vpid'
in kvm_vcpu_arch?
This patch only handles kvm_vcpu_arch so I think all should be vpid here.
And again, this code can be just put in main.c.
Huacai
>
> Regards
> Bibo Mao
>
> >
> > Moreover, no need to create a vmid.c file, just putting them in main.c is OK.
> >
> > Huacai
> >
> >> --
> >> 2.27.0
> >>
>