Following three test cases reported as regression on Linux mainline kernel
on x86_64, arm64, arm and i386
ltp-syscalls-tests:
* ioctl_loop01
* mknod07
* setns01
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
git branch: master
GOOD:
git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
git describe: v5.7-1230-gb23c4771ff62
BAD:
git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
git describe: v5.7-3523-g1ee08de1e234
kernel-config: https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
We are investigating these failures.
tst_test.c:906: CONF: btrfs driver not available
tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
[ 1073.639677] loop_set_status: loop1 () has still dirty pages (nrpages=1)
ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
'/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
ioctl_loop01.c:63: FAIL: expect 12 but got 17
ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
[ 1073.679678] loop_set_status: loop1 () has still dirty pages (nrpages=1)
ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
HINT: You _MAY_ be missing kernel fixes, see:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
mke2fs 1.43.8 (1-Jan-2018)
[ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
ext4 subsystem
[ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts='' extra opts=''
mknod07 1 TPASS : mknod failed as expected:
TEST_ERRNO=EACCES(13): Permission denied
mknod07 2 TPASS : mknod failed as expected:
TEST_ERRNO=EACCES(13): Permission denied
mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
mknod07 4 TPASS : mknod failed as expected:
TEST_ERRNO=EPERM(1): Operation not permitted
mknod07 5 TPASS : mknod failed as expected:
TEST_ERRNO=EROFS(30): Read-only file system
mknod07 6 TPASS : mknod failed as expected:
TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6, ns_types[0]=0x8000000
setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
setns01 0 TINFO : ns_name=net, ns_fds[2]=8, ns_types[2]=0x40000000
setns01 0 TINFO : ns_name=pid, ns_fds[3]=9, ns_types[3]=0x20000000
setns01 0 TINFO : ns_name=uts, ns_fds[4]=10, ns_types[4]=0x4000000
setns01 0 TINFO : setns(-1, 0x8000000)
setns01 1 TPASS : invalid fd exp_errno=9
setns01 0 TINFO : setns(-1, 0x20000)
setns01 2 TPASS : invalid fd exp_errno=9
setns01 0 TINFO : setns(-1, 0x40000000)
setns01 3 TPASS : invalid fd exp_errno=9
setns01 0 TINFO : setns(-1, 0x20000000)
setns01 4 TPASS : invalid fd exp_errno=9
setns01 0 TINFO : setns(-1, 0x4000000)
setns01 5 TPASS : invalid fd exp_errno=9
setns01 0 TINFO : setns(11, 0x8000000)
setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
errno=EBADF(9): Bad file descriptor
setns01 0 TINFO : setns(11, 0x20000)
setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
errno=EBADF(9): Bad file descriptor
setns01 0 TINFO : setns(11, 0x40000000)
setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
errno=EBADF(9): Bad file descriptor
setns01 0 TINFO : setns(11, 0x20000000)
setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
errno=EBADF(9): Bad file descriptor
setns01 0 TINFO : setns(11, 0x4000000)
setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
errno=EBADF(9): Bad file descriptor
Full test log link,
https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
test results comparison shows this test case started failing from June-2-2020
https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
--
Linaro LKFT
https://lkft.linaro.org
+ [email protected]
On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju <[email protected]> wrote:
>
> Following three test cases reported as regression on Linux mainline kernel
> on x86_64, arm64, arm and i386
>
> ltp-syscalls-tests:
> * ioctl_loop01
> * mknod07
> * setns01
>
> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> git branch: master
> GOOD:
> git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
> git describe: v5.7-1230-gb23c4771ff62
> BAD:
> git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
> git describe: v5.7-3523-g1ee08de1e234
>
> kernel-config: https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
>
> We are investigating these failures.
>
> tst_test.c:906: CONF: btrfs driver not available
> tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
> tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
> ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
> [ 1073.639677] loop_set_status: loop1 () has still dirty pages (nrpages=1)
> ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
> ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
> '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
> ioctl_loop01.c:63: FAIL: expect 12 but got 17
> ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
> ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
> ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
> [ 1073.679678] loop_set_status: loop1 () has still dirty pages (nrpages=1)
> ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
>
> HINT: You _MAY_ be missing kernel fixes, see:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
>
> mke2fs 1.43.8 (1-Jan-2018)
> [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
> ext4 subsystem
> [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
> mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
> mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts='' extra opts=''
> mknod07 1 TPASS : mknod failed as expected:
> TEST_ERRNO=EACCES(13): Permission denied
> mknod07 2 TPASS : mknod failed as expected:
> TEST_ERRNO=EACCES(13): Permission denied
> mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
> mknod07 4 TPASS : mknod failed as expected:
> TEST_ERRNO=EPERM(1): Operation not permitted
> mknod07 5 TPASS : mknod failed as expected:
> TEST_ERRNO=EROFS(30): Read-only file system
> mknod07 6 TPASS : mknod failed as expected:
> TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
>
>
> setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6, ns_types[0]=0x8000000
> setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
> setns01 0 TINFO : ns_name=net, ns_fds[2]=8, ns_types[2]=0x40000000
> setns01 0 TINFO : ns_name=pid, ns_fds[3]=9, ns_types[3]=0x20000000
> setns01 0 TINFO : ns_name=uts, ns_fds[4]=10, ns_types[4]=0x4000000
> setns01 0 TINFO : setns(-1, 0x8000000)
> setns01 1 TPASS : invalid fd exp_errno=9
> setns01 0 TINFO : setns(-1, 0x20000)
> setns01 2 TPASS : invalid fd exp_errno=9
> setns01 0 TINFO : setns(-1, 0x40000000)
> setns01 3 TPASS : invalid fd exp_errno=9
> setns01 0 TINFO : setns(-1, 0x20000000)
> setns01 4 TPASS : invalid fd exp_errno=9
> setns01 0 TINFO : setns(-1, 0x4000000)
> setns01 5 TPASS : invalid fd exp_errno=9
> setns01 0 TINFO : setns(11, 0x8000000)
> setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> errno=EBADF(9): Bad file descriptor
> setns01 0 TINFO : setns(11, 0x20000)
> setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> errno=EBADF(9): Bad file descriptor
> setns01 0 TINFO : setns(11, 0x40000000)
> setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> errno=EBADF(9): Bad file descriptor
> setns01 0 TINFO : setns(11, 0x20000000)
> setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> errno=EBADF(9): Bad file descriptor
> setns01 0 TINFO : setns(11, 0x4000000)
> setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> errno=EBADF(9): Bad file descriptor
>
> Full test log link,
> https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
>
> test results comparison shows this test case started failing from June-2-2020
> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
>
> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
>
> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
>
>
> --
> Linaro LKFT
> https://lkft.linaro.org
Hi Naresh,
I suspect the loop failures are due to
faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
to you.
Thanks,
Martijn
On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju <[email protected]> wrote:
>
> + [email protected]
>
> On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju <[email protected]> wrote:
> >
> > Following three test cases reported as regression on Linux mainline kernel
> > on x86_64, arm64, arm and i386
> >
> > ltp-syscalls-tests:
> > * ioctl_loop01
> > * mknod07
> > * setns01
> >
> > git repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> > git branch: master
> > GOOD:
> > git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
> > git describe: v5.7-1230-gb23c4771ff62
> > BAD:
> > git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
> > git describe: v5.7-3523-g1ee08de1e234
> >
> > kernel-config: https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
> >
> > We are investigating these failures.
> >
> > tst_test.c:906: CONF: btrfs driver not available
> > tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
> > tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
> > ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
> > [ 1073.639677] loop_set_status: loop1 () has still dirty pages (nrpages=1)
> > ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
> > ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
> > '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
> > ioctl_loop01.c:63: FAIL: expect 12 but got 17
> > ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
> > ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
> > ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
> > [ 1073.679678] loop_set_status: loop1 () has still dirty pages (nrpages=1)
> > ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
> >
> > HINT: You _MAY_ be missing kernel fixes, see:
> > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
> >
> > mke2fs 1.43.8 (1-Jan-2018)
> > [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
> > ext4 subsystem
> > [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
> > mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
> > mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts='' extra opts=''
> > mknod07 1 TPASS : mknod failed as expected:
> > TEST_ERRNO=EACCES(13): Permission denied
> > mknod07 2 TPASS : mknod failed as expected:
> > TEST_ERRNO=EACCES(13): Permission denied
> > mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
> > mknod07 4 TPASS : mknod failed as expected:
> > TEST_ERRNO=EPERM(1): Operation not permitted
> > mknod07 5 TPASS : mknod failed as expected:
> > TEST_ERRNO=EROFS(30): Read-only file system
> > mknod07 6 TPASS : mknod failed as expected:
> > TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
> >
> >
> > setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6, ns_types[0]=0x8000000
> > setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
> > setns01 0 TINFO : ns_name=net, ns_fds[2]=8, ns_types[2]=0x40000000
> > setns01 0 TINFO : ns_name=pid, ns_fds[3]=9, ns_types[3]=0x20000000
> > setns01 0 TINFO : ns_name=uts, ns_fds[4]=10, ns_types[4]=0x4000000
> > setns01 0 TINFO : setns(-1, 0x8000000)
> > setns01 1 TPASS : invalid fd exp_errno=9
> > setns01 0 TINFO : setns(-1, 0x20000)
> > setns01 2 TPASS : invalid fd exp_errno=9
> > setns01 0 TINFO : setns(-1, 0x40000000)
> > setns01 3 TPASS : invalid fd exp_errno=9
> > setns01 0 TINFO : setns(-1, 0x20000000)
> > setns01 4 TPASS : invalid fd exp_errno=9
> > setns01 0 TINFO : setns(-1, 0x4000000)
> > setns01 5 TPASS : invalid fd exp_errno=9
> > setns01 0 TINFO : setns(11, 0x8000000)
> > setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > errno=EBADF(9): Bad file descriptor
> > setns01 0 TINFO : setns(11, 0x20000)
> > setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > errno=EBADF(9): Bad file descriptor
> > setns01 0 TINFO : setns(11, 0x40000000)
> > setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > errno=EBADF(9): Bad file descriptor
> > setns01 0 TINFO : setns(11, 0x20000000)
> > setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > errno=EBADF(9): Bad file descriptor
> > setns01 0 TINFO : setns(11, 0x4000000)
> > setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > errno=EBADF(9): Bad file descriptor
> >
> > Full test log link,
> > https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
> >
> > test results comparison shows this test case started failing from June-2-2020
> > https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
> >
> > https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
> >
> > https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
> >
> >
> > --
> > Linaro LKFT
> > https://lkft.linaro.org
Hi Naresh,
I just sent a patch and cc'd you. I verified all the loop tests pass
again with that patch.
Thanks,
Martijn
On Thu, Jun 4, 2020 at 9:10 PM Martijn Coenen <[email protected]> wrote:
>
> Hi Naresh,
>
> I suspect the loop failures are due to
> faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
> LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
> to you.
>
> Thanks,
> Martijn
>
> On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju <[email protected]> wrote:
> >
> > + [email protected]
> >
> > On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju <[email protected]> wrote:
> > >
> > > Following three test cases reported as regression on Linux mainline kernel
> > > on x86_64, arm64, arm and i386
> > >
> > > ltp-syscalls-tests:
> > > * ioctl_loop01
> > > * mknod07
> > > * setns01
> > >
> > > git repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> > > git branch: master
> > > GOOD:
> > > git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
> > > git describe: v5.7-1230-gb23c4771ff62
> > > BAD:
> > > git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
> > > git describe: v5.7-3523-g1ee08de1e234
> > >
> > > kernel-config: https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
> > >
> > > We are investigating these failures.
> > >
> > > tst_test.c:906: CONF: btrfs driver not available
> > > tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
> > > tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
> > > ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
> > > [ 1073.639677] loop_set_status: loop1 () has still dirty pages (nrpages=1)
> > > ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
> > > ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
> > > '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
> > > ioctl_loop01.c:63: FAIL: expect 12 but got 17
> > > ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
> > > ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
> > > ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
> > > [ 1073.679678] loop_set_status: loop1 () has still dirty pages (nrpages=1)
> > > ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
> > >
> > > HINT: You _MAY_ be missing kernel fixes, see:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
> > >
> > > mke2fs 1.43.8 (1-Jan-2018)
> > > [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
> > > ext4 subsystem
> > > [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
> > > mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
> > > mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts='' extra opts=''
> > > mknod07 1 TPASS : mknod failed as expected:
> > > TEST_ERRNO=EACCES(13): Permission denied
> > > mknod07 2 TPASS : mknod failed as expected:
> > > TEST_ERRNO=EACCES(13): Permission denied
> > > mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
> > > mknod07 4 TPASS : mknod failed as expected:
> > > TEST_ERRNO=EPERM(1): Operation not permitted
> > > mknod07 5 TPASS : mknod failed as expected:
> > > TEST_ERRNO=EROFS(30): Read-only file system
> > > mknod07 6 TPASS : mknod failed as expected:
> > > TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
> > >
> > >
> > > setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6, ns_types[0]=0x8000000
> > > setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
> > > setns01 0 TINFO : ns_name=net, ns_fds[2]=8, ns_types[2]=0x40000000
> > > setns01 0 TINFO : ns_name=pid, ns_fds[3]=9, ns_types[3]=0x20000000
> > > setns01 0 TINFO : ns_name=uts, ns_fds[4]=10, ns_types[4]=0x4000000
> > > setns01 0 TINFO : setns(-1, 0x8000000)
> > > setns01 1 TPASS : invalid fd exp_errno=9
> > > setns01 0 TINFO : setns(-1, 0x20000)
> > > setns01 2 TPASS : invalid fd exp_errno=9
> > > setns01 0 TINFO : setns(-1, 0x40000000)
> > > setns01 3 TPASS : invalid fd exp_errno=9
> > > setns01 0 TINFO : setns(-1, 0x20000000)
> > > setns01 4 TPASS : invalid fd exp_errno=9
> > > setns01 0 TINFO : setns(-1, 0x4000000)
> > > setns01 5 TPASS : invalid fd exp_errno=9
> > > setns01 0 TINFO : setns(11, 0x8000000)
> > > setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > > errno=EBADF(9): Bad file descriptor
> > > setns01 0 TINFO : setns(11, 0x20000)
> > > setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > > errno=EBADF(9): Bad file descriptor
> > > setns01 0 TINFO : setns(11, 0x40000000)
> > > setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > > errno=EBADF(9): Bad file descriptor
> > > setns01 0 TINFO : setns(11, 0x20000000)
> > > setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > > errno=EBADF(9): Bad file descriptor
> > > setns01 0 TINFO : setns(11, 0x4000000)
> > > setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> > > errno=EBADF(9): Bad file descriptor
> > >
> > > Full test log link,
> > > https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
> > >
> > > test results comparison shows this test case started failing from June-2-2020
> > > https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
> > >
> > > https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
> > >
> > > https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
> > >
> > >
> > > --
> > > Linaro LKFT
> > > https://lkft.linaro.org
Hi Martijn
> Hi Naresh,
>
> I just sent a patch and cc'd you. I verified all the loop tests pass
> again with that patch.
I think you want to say "without". I verified the ioctl_loop01 fails
with faf1d25440 ("loop: Clean up LOOP_SET_STATUS lo_flags handling").
This kernel commit breaks old behaviour(if old flag all 0, new flag is
always 0 regradless your flag setting).
I think we should modify code as below:
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 13518ba191f5..c6ba8cf486ce 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1364,11 +1364,9 @@ loop_set_status(struct loop_device *lo, const
struct loop_info64 *info)
if (err)
goto out_unfreeze;
- /* Mask out flags that can't be set using LOOP_SET_STATUS. */
- lo->lo_flags &= ~LOOP_SET_STATUS_SETTABLE_FLAGS;
- /* For those flags, use the previous values instead */
- lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
- /* For flags that can't be cleared, use previous values too */
+ /* Mask out flags that can be set using LOOP_SET_STATUS. */
+ lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
+ /* For flags that can't be cleared, use previous values. */
lo->lo_flags |= prev_lo_flags &~LOOP_SET_STATUS_CLEARABLE_FLAGS;
Best Regards
Yang Xu
>
> Thanks,
> Martijn
>
>
> On Thu, Jun 4, 2020 at 9:10 PM Martijn Coenen <[email protected]> wrote:
>>
>> Hi Naresh,
>>
>> I suspect the loop failures are due to
>> faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
>> LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
>> to you.
>>
>> Thanks,
>> Martijn
>>
>> On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju <[email protected]> wrote:
>>>
>>> + [email protected]
>>>
>>> On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju <[email protected]> wrote:
>>>>
>>>> Following three test cases reported as regression on Linux mainline kernel
>>>> on x86_64, arm64, arm and i386
>>>>
>>>> ltp-syscalls-tests:
>>>> * ioctl_loop01
>>>> * mknod07
>>>> * setns01
>>>>
>>>> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>>> git branch: master
>>>> GOOD:
>>>> git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
>>>> git describe: v5.7-1230-gb23c4771ff62
>>>> BAD:
>>>> git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
>>>> git describe: v5.7-3523-g1ee08de1e234
>>>>
>>>> kernel-config: https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
>>>>
>>>> We are investigating these failures.
>>>>
>>>> tst_test.c:906: CONF: btrfs driver not available
>>>> tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
>>>> tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
>>>> ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
>>>> [ 1073.639677] loop_set_status: loop1 () has still dirty pages (nrpages=1)
>>>> ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
>>>> ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
>>>> '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
>>>> ioctl_loop01.c:63: FAIL: expect 12 but got 17
>>>> ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
>>>> ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
>>>> ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
>>>> [ 1073.679678] loop_set_status: loop1 () has still dirty pages (nrpages=1)
>>>> ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
>>>>
>>>> HINT: You _MAY_ be missing kernel fixes, see:
>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
>>>>
>>>> mke2fs 1.43.8 (1-Jan-2018)
>>>> [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
>>>> ext4 subsystem
>>>> [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
>>>> mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
>>>> mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts='' extra opts=''
>>>> mknod07 1 TPASS : mknod failed as expected:
>>>> TEST_ERRNO=EACCES(13): Permission denied
>>>> mknod07 2 TPASS : mknod failed as expected:
>>>> TEST_ERRNO=EACCES(13): Permission denied
>>>> mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
>>>> mknod07 4 TPASS : mknod failed as expected:
>>>> TEST_ERRNO=EPERM(1): Operation not permitted
>>>> mknod07 5 TPASS : mknod failed as expected:
>>>> TEST_ERRNO=EROFS(30): Read-only file system
>>>> mknod07 6 TPASS : mknod failed as expected:
>>>> TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
>>>>
>>>>
>>>> setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6, ns_types[0]=0x8000000
>>>> setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
>>>> setns01 0 TINFO : ns_name=net, ns_fds[2]=8, ns_types[2]=0x40000000
>>>> setns01 0 TINFO : ns_name=pid, ns_fds[3]=9, ns_types[3]=0x20000000
>>>> setns01 0 TINFO : ns_name=uts, ns_fds[4]=10, ns_types[4]=0x4000000
>>>> setns01 0 TINFO : setns(-1, 0x8000000)
>>>> setns01 1 TPASS : invalid fd exp_errno=9
>>>> setns01 0 TINFO : setns(-1, 0x20000)
>>>> setns01 2 TPASS : invalid fd exp_errno=9
>>>> setns01 0 TINFO : setns(-1, 0x40000000)
>>>> setns01 3 TPASS : invalid fd exp_errno=9
>>>> setns01 0 TINFO : setns(-1, 0x20000000)
>>>> setns01 4 TPASS : invalid fd exp_errno=9
>>>> setns01 0 TINFO : setns(-1, 0x4000000)
>>>> setns01 5 TPASS : invalid fd exp_errno=9
>>>> setns01 0 TINFO : setns(11, 0x8000000)
>>>> setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>> errno=EBADF(9): Bad file descriptor
>>>> setns01 0 TINFO : setns(11, 0x20000)
>>>> setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>> errno=EBADF(9): Bad file descriptor
>>>> setns01 0 TINFO : setns(11, 0x40000000)
>>>> setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>> errno=EBADF(9): Bad file descriptor
>>>> setns01 0 TINFO : setns(11, 0x20000000)
>>>> setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>> errno=EBADF(9): Bad file descriptor
>>>> setns01 0 TINFO : setns(11, 0x4000000)
>>>> setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>> errno=EBADF(9): Bad file descriptor
>>>>
>>>> Full test log link,
>>>> https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
>>>>
>>>> test results comparison shows this test case started failing from June-2-2020
>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
>>>>
>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
>>>>
>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
>>>>
>>>>
>>>> --
>>>> Linaro LKFT
>>>> https://lkft.linaro.org
>
>
----- Original Message -----
> Following three test cases reported as regression on Linux mainline kernel
> on x86_64, arm64, arm and i386
>
> ltp-syscalls-tests:
> * ioctl_loop01
> * mknod07
Test updated:
https://github.com/linux-test-project/ltp/commit/13fcfa2d6bdd1fb71c4528b47170e8e8fb3a8a32
> * setns01
commit 303cc571d107 ("nsproxy: attach to namespaces via pidfds")
changed errno that is returned for regular file from EINVAL to EBADF.
This appears to fit more current man page, so I think we need to fix
test to accept both. (I'm looking into that)
Hi Martijn
Sorry for noise. I see your patch in here[1] . I will modify
ioctl_loop01 to test that LO_FLAGS_PARTSCAN can not clear and
LO_FLAGS_AUTOCLEAR can be clear.
ps: Giving the url of patch is better so that other people doesn't need
to investigate it again.
[1]https://patchwork.kernel.org/patch/11588321/
Best Regards
Yang Xu
> Hi Martijn
>
>> Hi Naresh,
>>
>> I just sent a patch and cc'd you. I verified all the loop tests pass
>> again with that patch.
> I think you want to say "without". I verified the ioctl_loop01 fails
> with faf1d25440 ("loop: Clean up LOOP_SET_STATUS lo_flags handling").
>
> This kernel commit breaks old behaviour(if old flag all 0, new flag is
> always 0 regradless your flag setting).
>
> I think we should modify code as below:
> diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> index 13518ba191f5..c6ba8cf486ce 100644
> --- a/drivers/block/loop.c
> +++ b/drivers/block/loop.c
> @@ -1364,11 +1364,9 @@ loop_set_status(struct loop_device *lo, const
> struct loop_info64 *info)
> if (err)
> goto out_unfreeze;
>
> - /* Mask out flags that can't be set using LOOP_SET_STATUS. */
> - lo->lo_flags &= ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> - /* For those flags, use the previous values instead */
> - lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> - /* For flags that can't be cleared, use previous values too */
> + /* Mask out flags that can be set using LOOP_SET_STATUS. */
> + lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
> + /* For flags that can't be cleared, use previous values. */
> lo->lo_flags |= prev_lo_flags &~LOOP_SET_STATUS_CLEARABLE_FLAGS;
>
> Best Regards
> Yang Xu
>>
>> Thanks,
>> Martijn
>>
>>
>> On Thu, Jun 4, 2020 at 9:10 PM Martijn Coenen <[email protected]> wrote:
>>>
>>> Hi Naresh,
>>>
>>> I suspect the loop failures are due to
>>> faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
>>> LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
>>> to you.
>>>
>>> Thanks,
>>> Martijn
>>>
>>> On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju
>>> <[email protected]> wrote:
>>>>
>>>> + [email protected]
>>>>
>>>> On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju
>>>> <[email protected]> wrote:
>>>>>
>>>>> Following three test cases reported as regression on Linux mainline
>>>>> kernel
>>>>> on x86_64, arm64, arm and i386
>>>>>
>>>>> ltp-syscalls-tests:
>>>>> * ioctl_loop01
>>>>> * mknod07
>>>>> * setns01
>>>>>
>>>>> git repo:
>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>>>> git branch: master
>>>>> GOOD:
>>>>> git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
>>>>> git describe: v5.7-1230-gb23c4771ff62
>>>>> BAD:
>>>>> git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
>>>>> git describe: v5.7-3523-g1ee08de1e234
>>>>>
>>>>> kernel-config:
>>>>> https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
>>>>>
>>>>> We are investigating these failures.
>>>>>
>>>>> tst_test.c:906: CONF: btrfs driver not available
>>>>> tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
>>>>> tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
>>>>> ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
>>>>> [ 1073.639677] loop_set_status: loop1 () has still dirty pages
>>>>> (nrpages=1)
>>>>> ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
>>>>> ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
>>>>> '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
>>>>> ioctl_loop01.c:63: FAIL: expect 12 but got 17
>>>>> ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
>>>>> ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
>>>>> ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
>>>>> [ 1073.679678] loop_set_status: loop1 () has still dirty pages
>>>>> (nrpages=1)
>>>>> ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
>>>>>
>>>>> HINT: You _MAY_ be missing kernel fixes, see:
>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
>>>>>
>>>>>
>>>>> mke2fs 1.43.8 (1-Jan-2018)
>>>>> [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
>>>>> ext4 subsystem
>>>>> [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal.
>>>>> Opts: (null)
>>>>> mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
>>>>> mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts=''
>>>>> extra opts=''
>>>>> mknod07 1 TPASS : mknod failed as expected:
>>>>> TEST_ERRNO=EACCES(13): Permission denied
>>>>> mknod07 2 TPASS : mknod failed as expected:
>>>>> TEST_ERRNO=EACCES(13): Permission denied
>>>>> mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
>>>>> mknod07 4 TPASS : mknod failed as expected:
>>>>> TEST_ERRNO=EPERM(1): Operation not permitted
>>>>> mknod07 5 TPASS : mknod failed as expected:
>>>>> TEST_ERRNO=EROFS(30): Read-only file system
>>>>> mknod07 6 TPASS : mknod failed as expected:
>>>>> TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
>>>>>
>>>>>
>>>>> setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6,
>>>>> ns_types[0]=0x8000000
>>>>> setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
>>>>> setns01 0 TINFO : ns_name=net, ns_fds[2]=8,
>>>>> ns_types[2]=0x40000000
>>>>> setns01 0 TINFO : ns_name=pid, ns_fds[3]=9,
>>>>> ns_types[3]=0x20000000
>>>>> setns01 0 TINFO : ns_name=uts, ns_fds[4]=10,
>>>>> ns_types[4]=0x4000000
>>>>> setns01 0 TINFO : setns(-1, 0x8000000)
>>>>> setns01 1 TPASS : invalid fd exp_errno=9
>>>>> setns01 0 TINFO : setns(-1, 0x20000)
>>>>> setns01 2 TPASS : invalid fd exp_errno=9
>>>>> setns01 0 TINFO : setns(-1, 0x40000000)
>>>>> setns01 3 TPASS : invalid fd exp_errno=9
>>>>> setns01 0 TINFO : setns(-1, 0x20000000)
>>>>> setns01 4 TPASS : invalid fd exp_errno=9
>>>>> setns01 0 TINFO : setns(-1, 0x4000000)
>>>>> setns01 5 TPASS : invalid fd exp_errno=9
>>>>> setns01 0 TINFO : setns(11, 0x8000000)
>>>>> setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>> errno=EBADF(9): Bad file descriptor
>>>>> setns01 0 TINFO : setns(11, 0x20000)
>>>>> setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>> errno=EBADF(9): Bad file descriptor
>>>>> setns01 0 TINFO : setns(11, 0x40000000)
>>>>> setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>> errno=EBADF(9): Bad file descriptor
>>>>> setns01 0 TINFO : setns(11, 0x20000000)
>>>>> setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>> errno=EBADF(9): Bad file descriptor
>>>>> setns01 0 TINFO : setns(11, 0x4000000)
>>>>> setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>> errno=EBADF(9): Bad file descriptor
>>>>>
>>>>> Full test log link,
>>>>> https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
>>>>>
>>>>> test results comparison shows this test case started failing from
>>>>> June-2-2020
>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
>>>>>
>>>>>
>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
>>>>>
>>>>>
>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Linaro LKFT
>>>>> https://lkft.linaro.org
>>
>>
>
>
>
Hey Yang,
On Fri, Jun 5, 2020 at 10:59 AM Yang Xu <[email protected]> wrote:
>
> Hi Martijn
>
> Sorry for noise. I see your patch in here[1] . I will modify
> ioctl_loop01 to test that LO_FLAGS_PARTSCAN can not clear and
> LO_FLAGS_AUTOCLEAR can be clear.
Thanks, that would indeed be useful.
>
> ps: Giving the url of patch is better so that other people doesn't need
> to investigate it again.
> [1]https://patchwork.kernel.org/patch/11588321/
Ok, will do next time!
Best,
Martijn
>
> Best Regards
> Yang Xu
> > Hi Martijn
> >
> >> Hi Naresh,
> >>
> >> I just sent a patch and cc'd you. I verified all the loop tests pass
> >> again with that patch.
> > I think you want to say "without". I verified the ioctl_loop01 fails
> > with faf1d25440 ("loop: Clean up LOOP_SET_STATUS lo_flags handling").
> >
> > This kernel commit breaks old behaviour(if old flag all 0, new flag is
> > always 0 regradless your flag setting).
> >
> > I think we should modify code as below:
> > diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> > index 13518ba191f5..c6ba8cf486ce 100644
> > --- a/drivers/block/loop.c
> > +++ b/drivers/block/loop.c
> > @@ -1364,11 +1364,9 @@ loop_set_status(struct loop_device *lo, const
> > struct loop_info64 *info)
> > if (err)
> > goto out_unfreeze;
> >
> > - /* Mask out flags that can't be set using LOOP_SET_STATUS. */
> > - lo->lo_flags &= ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> > - /* For those flags, use the previous values instead */
> > - lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> > - /* For flags that can't be cleared, use previous values too */
> > + /* Mask out flags that can be set using LOOP_SET_STATUS. */
> > + lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
> > + /* For flags that can't be cleared, use previous values. */
> > lo->lo_flags |= prev_lo_flags &~LOOP_SET_STATUS_CLEARABLE_FLAGS;
> >
> > Best Regards
> > Yang Xu
> >>
> >> Thanks,
> >> Martijn
> >>
> >>
> >> On Thu, Jun 4, 2020 at 9:10 PM Martijn Coenen <[email protected]> wrote:
> >>>
> >>> Hi Naresh,
> >>>
> >>> I suspect the loop failures are due to
> >>> faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
> >>> LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
> >>> to you.
> >>>
> >>> Thanks,
> >>> Martijn
> >>>
> >>> On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju
> >>> <[email protected]> wrote:
> >>>>
> >>>> + [email protected]
> >>>>
> >>>> On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju
> >>>> <[email protected]> wrote:
> >>>>>
> >>>>> Following three test cases reported as regression on Linux mainline
> >>>>> kernel
> >>>>> on x86_64, arm64, arm and i386
> >>>>>
> >>>>> ltp-syscalls-tests:
> >>>>> * ioctl_loop01
> >>>>> * mknod07
> >>>>> * setns01
> >>>>>
> >>>>> git repo:
> >>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> >>>>> git branch: master
> >>>>> GOOD:
> >>>>> git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
> >>>>> git describe: v5.7-1230-gb23c4771ff62
> >>>>> BAD:
> >>>>> git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
> >>>>> git describe: v5.7-3523-g1ee08de1e234
> >>>>>
> >>>>> kernel-config:
> >>>>> https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
> >>>>>
> >>>>> We are investigating these failures.
> >>>>>
> >>>>> tst_test.c:906: CONF: btrfs driver not available
> >>>>> tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
> >>>>> tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
> >>>>> ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
> >>>>> [ 1073.639677] loop_set_status: loop1 () has still dirty pages
> >>>>> (nrpages=1)
> >>>>> ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
> >>>>> ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
> >>>>> '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
> >>>>> ioctl_loop01.c:63: FAIL: expect 12 but got 17
> >>>>> ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
> >>>>> ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
> >>>>> ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
> >>>>> [ 1073.679678] loop_set_status: loop1 () has still dirty pages
> >>>>> (nrpages=1)
> >>>>> ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
> >>>>>
> >>>>> HINT: You _MAY_ be missing kernel fixes, see:
> >>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
> >>>>>
> >>>>>
> >>>>> mke2fs 1.43.8 (1-Jan-2018)
> >>>>> [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
> >>>>> ext4 subsystem
> >>>>> [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal.
> >>>>> Opts: (null)
> >>>>> mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
> >>>>> mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts=''
> >>>>> extra opts=''
> >>>>> mknod07 1 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EACCES(13): Permission denied
> >>>>> mknod07 2 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EACCES(13): Permission denied
> >>>>> mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
> >>>>> mknod07 4 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EPERM(1): Operation not permitted
> >>>>> mknod07 5 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EROFS(30): Read-only file system
> >>>>> mknod07 6 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
> >>>>>
> >>>>>
> >>>>> setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6,
> >>>>> ns_types[0]=0x8000000
> >>>>> setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
> >>>>> setns01 0 TINFO : ns_name=net, ns_fds[2]=8,
> >>>>> ns_types[2]=0x40000000
> >>>>> setns01 0 TINFO : ns_name=pid, ns_fds[3]=9,
> >>>>> ns_types[3]=0x20000000
> >>>>> setns01 0 TINFO : ns_name=uts, ns_fds[4]=10,
> >>>>> ns_types[4]=0x4000000
> >>>>> setns01 0 TINFO : setns(-1, 0x8000000)
> >>>>> setns01 1 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x20000)
> >>>>> setns01 2 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x40000000)
> >>>>> setns01 3 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x20000000)
> >>>>> setns01 4 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x4000000)
> >>>>> setns01 5 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(11, 0x8000000)
> >>>>> setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x20000)
> >>>>> setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x40000000)
> >>>>> setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x20000000)
> >>>>> setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x4000000)
> >>>>> setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>>
> >>>>> Full test log link,
> >>>>> https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
> >>>>>
> >>>>> test results comparison shows this test case started failing from
> >>>>> June-2-2020
> >>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
> >>>>>
> >>>>>
> >>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
> >>>>>
> >>>>>
> >>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Linaro LKFT
> >>>>> https://lkft.linaro.org
> >>
> >>
> >
> >
> >
>
>
Hi Martign
Also for your kernel commit,
lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_CLEARABLE_FLAGS;
since ~LOOP_SET_STATUS_SETTABLE_FLAGS has been included in
~LOOP_SET_STATUS_CLEARABLE_FLAGS, do we still need the previous step?
What do you think about it?
Best Regards
Yang Xu
> Hey Yang,
>
> On Fri, Jun 5, 2020 at 10:59 AM Yang Xu <[email protected]> wrote:
>>
>> Hi Martijn
>>
>> Sorry for noise. I see your patch in here[1] . I will modify
>> ioctl_loop01 to test that LO_FLAGS_PARTSCAN can not clear and
>> LO_FLAGS_AUTOCLEAR can be clear.
>
> Thanks, that would indeed be useful.
>
>>
>> ps: Giving the url of patch is better so that other people doesn't need
>> to investigate it again.
>> [1]https://patchwork.kernel.org/patch/11588321/
>
> Ok, will do next time!
>
> Best,
> Martijn
>>
>> Best Regards
>> Yang Xu
>>> Hi Martijn
>>>
>>>> Hi Naresh,
>>>>
>>>> I just sent a patch and cc'd you. I verified all the loop tests pass
>>>> again with that patch.
>>> I think you want to say "without". I verified the ioctl_loop01 fails
>>> with faf1d25440 ("loop: Clean up LOOP_SET_STATUS lo_flags handling").
>>>
>>> This kernel commit breaks old behaviour(if old flag all 0, new flag is
>>> always 0 regradless your flag setting).
>>>
>>> I think we should modify code as below:
>>> diff --git a/drivers/block/loop.c b/drivers/block/loop.c
>>> index 13518ba191f5..c6ba8cf486ce 100644
>>> --- a/drivers/block/loop.c
>>> +++ b/drivers/block/loop.c
>>> @@ -1364,11 +1364,9 @@ loop_set_status(struct loop_device *lo, const
>>> struct loop_info64 *info)
>>> if (err)
>>> goto out_unfreeze;
>>>
>>> - /* Mask out flags that can't be set using LOOP_SET_STATUS. */
>>> - lo->lo_flags &= ~LOOP_SET_STATUS_SETTABLE_FLAGS;
>>> - /* For those flags, use the previous values instead */
>>> - lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
>>> - /* For flags that can't be cleared, use previous values too */
>>> + /* Mask out flags that can be set using LOOP_SET_STATUS. */
>>> + lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
>>> + /* For flags that can't be cleared, use previous values. */
>>> lo->lo_flags |= prev_lo_flags &~LOOP_SET_STATUS_CLEARABLE_FLAGS;
>>>
>>> Best Regards
>>> Yang Xu
>>>>
>>>> Thanks,
>>>> Martijn
>>>>
>>>>
>>>> On Thu, Jun 4, 2020 at 9:10 PM Martijn Coenen <[email protected]> wrote:
>>>>>
>>>>> Hi Naresh,
>>>>>
>>>>> I suspect the loop failures are due to
>>>>> faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
>>>>> LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
>>>>> to you.
>>>>>
>>>>> Thanks,
>>>>> Martijn
>>>>>
>>>>> On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju
>>>>> <[email protected]> wrote:
>>>>>>
>>>>>> + [email protected]
>>>>>>
>>>>>> On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju
>>>>>> <[email protected]> wrote:
>>>>>>>
>>>>>>> Following three test cases reported as regression on Linux mainline
>>>>>>> kernel
>>>>>>> on x86_64, arm64, arm and i386
>>>>>>>
>>>>>>> ltp-syscalls-tests:
>>>>>>> * ioctl_loop01
>>>>>>> * mknod07
>>>>>>> * setns01
>>>>>>>
>>>>>>> git repo:
>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
>>>>>>> git branch: master
>>>>>>> GOOD:
>>>>>>> git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
>>>>>>> git describe: v5.7-1230-gb23c4771ff62
>>>>>>> BAD:
>>>>>>> git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
>>>>>>> git describe: v5.7-3523-g1ee08de1e234
>>>>>>>
>>>>>>> kernel-config:
>>>>>>> https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
>>>>>>>
>>>>>>> We are investigating these failures.
>>>>>>>
>>>>>>> tst_test.c:906: CONF: btrfs driver not available
>>>>>>> tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
>>>>>>> tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
>>>>>>> ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
>>>>>>> [ 1073.639677] loop_set_status: loop1 () has still dirty pages
>>>>>>> (nrpages=1)
>>>>>>> ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
>>>>>>> ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
>>>>>>> '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
>>>>>>> ioctl_loop01.c:63: FAIL: expect 12 but got 17
>>>>>>> ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
>>>>>>> ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
>>>>>>> ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
>>>>>>> [ 1073.679678] loop_set_status: loop1 () has still dirty pages
>>>>>>> (nrpages=1)
>>>>>>> ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
>>>>>>>
>>>>>>> HINT: You _MAY_ be missing kernel fixes, see:
>>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
>>>>>>>
>>>>>>>
>>>>>>> mke2fs 1.43.8 (1-Jan-2018)
>>>>>>> [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
>>>>>>> ext4 subsystem
>>>>>>> [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal.
>>>>>>> Opts: (null)
>>>>>>> mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
>>>>>>> mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts=''
>>>>>>> extra opts=''
>>>>>>> mknod07 1 TPASS : mknod failed as expected:
>>>>>>> TEST_ERRNO=EACCES(13): Permission denied
>>>>>>> mknod07 2 TPASS : mknod failed as expected:
>>>>>>> TEST_ERRNO=EACCES(13): Permission denied
>>>>>>> mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
>>>>>>> mknod07 4 TPASS : mknod failed as expected:
>>>>>>> TEST_ERRNO=EPERM(1): Operation not permitted
>>>>>>> mknod07 5 TPASS : mknod failed as expected:
>>>>>>> TEST_ERRNO=EROFS(30): Read-only file system
>>>>>>> mknod07 6 TPASS : mknod failed as expected:
>>>>>>> TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
>>>>>>>
>>>>>>>
>>>>>>> setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6,
>>>>>>> ns_types[0]=0x8000000
>>>>>>> setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
>>>>>>> setns01 0 TINFO : ns_name=net, ns_fds[2]=8,
>>>>>>> ns_types[2]=0x40000000
>>>>>>> setns01 0 TINFO : ns_name=pid, ns_fds[3]=9,
>>>>>>> ns_types[3]=0x20000000
>>>>>>> setns01 0 TINFO : ns_name=uts, ns_fds[4]=10,
>>>>>>> ns_types[4]=0x4000000
>>>>>>> setns01 0 TINFO : setns(-1, 0x8000000)
>>>>>>> setns01 1 TPASS : invalid fd exp_errno=9
>>>>>>> setns01 0 TINFO : setns(-1, 0x20000)
>>>>>>> setns01 2 TPASS : invalid fd exp_errno=9
>>>>>>> setns01 0 TINFO : setns(-1, 0x40000000)
>>>>>>> setns01 3 TPASS : invalid fd exp_errno=9
>>>>>>> setns01 0 TINFO : setns(-1, 0x20000000)
>>>>>>> setns01 4 TPASS : invalid fd exp_errno=9
>>>>>>> setns01 0 TINFO : setns(-1, 0x4000000)
>>>>>>> setns01 5 TPASS : invalid fd exp_errno=9
>>>>>>> setns01 0 TINFO : setns(11, 0x8000000)
>>>>>>> setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>>>> errno=EBADF(9): Bad file descriptor
>>>>>>> setns01 0 TINFO : setns(11, 0x20000)
>>>>>>> setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>>>> errno=EBADF(9): Bad file descriptor
>>>>>>> setns01 0 TINFO : setns(11, 0x40000000)
>>>>>>> setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>>>> errno=EBADF(9): Bad file descriptor
>>>>>>> setns01 0 TINFO : setns(11, 0x20000000)
>>>>>>> setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>>>> errno=EBADF(9): Bad file descriptor
>>>>>>> setns01 0 TINFO : setns(11, 0x4000000)
>>>>>>> setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
>>>>>>> errno=EBADF(9): Bad file descriptor
>>>>>>>
>>>>>>> Full test log link,
>>>>>>> https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
>>>>>>>
>>>>>>> test results comparison shows this test case started failing from
>>>>>>> June-2-2020
>>>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
>>>>>>>
>>>>>>>
>>>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
>>>>>>>
>>>>>>>
>>>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Linaro LKFT
>>>>>>> https://lkft.linaro.org
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>
>
On Fri, 5 Jun 2020 at 13:58, Jan Stancek <[email protected]> wrote:
>
>
>
> ----- Original Message -----
> > Following three test cases reported as regression on Linux mainline kernel
> > on x86_64, arm64, arm and i386
> >
> > ltp-syscalls-tests:
> > * ioctl_loop01
> > * mknod07
>
> Test updated:
> https://github.com/linux-test-project/ltp/commit/13fcfa2d6bdd1fb71c4528b47170e8e8fb3a8a32
ack.
>
> > * setns01
>
> commit 303cc571d107 ("nsproxy: attach to namespaces via pidfds")
> changed errno that is returned for regular file from EINVAL to EBADF.
> This appears to fit more current man page, so I think we need to fix
> test to accept both. (I'm looking into that)
Thanks for investigating these failures.
- Naresh
Hi Yang,
On Fri, Jun 5, 2020 at 11:27 AM Yang Xu <[email protected]> wrote:
> since ~LOOP_SET_STATUS_SETTABLE_FLAGS has been included in
> ~LOOP_SET_STATUS_CLEARABLE_FLAGS, do we still need the previous step?
> What do you think about it?
Yeah, I don't think we need the previous step with the current set of
flags, because clearable is a subset of settable. I will send a
follow-up patch some time next week.
Best,
Martijn
>
> Best Regards
> Yang Xu
>
> > Hey Yang,
> >
> > On Fri, Jun 5, 2020 at 10:59 AM Yang Xu <[email protected]> wrote:
> >>
> >> Hi Martijn
> >>
> >> Sorry for noise. I see your patch in here[1] . I will modify
> >> ioctl_loop01 to test that LO_FLAGS_PARTSCAN can not clear and
> >> LO_FLAGS_AUTOCLEAR can be clear.
> >
> > Thanks, that would indeed be useful.
> >
> >>
> >> ps: Giving the url of patch is better so that other people doesn't need
> >> to investigate it again.
> >> [1]https://patchwork.kernel.org/patch/11588321/
> >
> > Ok, will do next time!
> >
> > Best,
> > Martijn
> >>
> >> Best Regards
> >> Yang Xu
> >>> Hi Martijn
> >>>
> >>>> Hi Naresh,
> >>>>
> >>>> I just sent a patch and cc'd you. I verified all the loop tests pass
> >>>> again with that patch.
> >>> I think you want to say "without". I verified the ioctl_loop01 fails
> >>> with faf1d25440 ("loop: Clean up LOOP_SET_STATUS lo_flags handling").
> >>>
> >>> This kernel commit breaks old behaviour(if old flag all 0, new flag is
> >>> always 0 regradless your flag setting).
> >>>
> >>> I think we should modify code as below:
> >>> diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> >>> index 13518ba191f5..c6ba8cf486ce 100644
> >>> --- a/drivers/block/loop.c
> >>> +++ b/drivers/block/loop.c
> >>> @@ -1364,11 +1364,9 @@ loop_set_status(struct loop_device *lo, const
> >>> struct loop_info64 *info)
> >>> if (err)
> >>> goto out_unfreeze;
> >>>
> >>> - /* Mask out flags that can't be set using LOOP_SET_STATUS. */
> >>> - lo->lo_flags &= ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> >>> - /* For those flags, use the previous values instead */
> >>> - lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> >>> - /* For flags that can't be cleared, use previous values too */
> >>> + /* Mask out flags that can be set using LOOP_SET_STATUS. */
> >>> + lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
> >>> + /* For flags that can't be cleared, use previous values. */
> >>> lo->lo_flags |= prev_lo_flags &~LOOP_SET_STATUS_CLEARABLE_FLAGS;
> >>>
> >>> Best Regards
> >>> Yang Xu
> >>>>
> >>>> Thanks,
> >>>> Martijn
> >>>>
> >>>>
> >>>> On Thu, Jun 4, 2020 at 9:10 PM Martijn Coenen <[email protected]> wrote:
> >>>>>
> >>>>> Hi Naresh,
> >>>>>
> >>>>> I suspect the loop failures are due to
> >>>>> faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
> >>>>> LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
> >>>>> to you.
> >>>>>
> >>>>> Thanks,
> >>>>> Martijn
> >>>>>
> >>>>> On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju
> >>>>> <[email protected]> wrote:
> >>>>>>
> >>>>>> + [email protected]
> >>>>>>
> >>>>>> On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju
> >>>>>> <[email protected]> wrote:
> >>>>>>>
> >>>>>>> Following three test cases reported as regression on Linux mainline
> >>>>>>> kernel
> >>>>>>> on x86_64, arm64, arm and i386
> >>>>>>>
> >>>>>>> ltp-syscalls-tests:
> >>>>>>> * ioctl_loop01
> >>>>>>> * mknod07
> >>>>>>> * setns01
> >>>>>>>
> >>>>>>> git repo:
> >>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> >>>>>>> git branch: master
> >>>>>>> GOOD:
> >>>>>>> git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
> >>>>>>> git describe: v5.7-1230-gb23c4771ff62
> >>>>>>> BAD:
> >>>>>>> git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
> >>>>>>> git describe: v5.7-3523-g1ee08de1e234
> >>>>>>>
> >>>>>>> kernel-config:
> >>>>>>> https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
> >>>>>>>
> >>>>>>> We are investigating these failures.
> >>>>>>>
> >>>>>>> tst_test.c:906: CONF: btrfs driver not available
> >>>>>>> tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
> >>>>>>> tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
> >>>>>>> ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
> >>>>>>> [ 1073.639677] loop_set_status: loop1 () has still dirty pages
> >>>>>>> (nrpages=1)
> >>>>>>> ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
> >>>>>>> ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
> >>>>>>> '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
> >>>>>>> ioctl_loop01.c:63: FAIL: expect 12 but got 17
> >>>>>>> ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
> >>>>>>> ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
> >>>>>>> ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
> >>>>>>> [ 1073.679678] loop_set_status: loop1 () has still dirty pages
> >>>>>>> (nrpages=1)
> >>>>>>> ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
> >>>>>>>
> >>>>>>> HINT: You _MAY_ be missing kernel fixes, see:
> >>>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
> >>>>>>>
> >>>>>>>
> >>>>>>> mke2fs 1.43.8 (1-Jan-2018)
> >>>>>>> [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
> >>>>>>> ext4 subsystem
> >>>>>>> [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal.
> >>>>>>> Opts: (null)
> >>>>>>> mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
> >>>>>>> mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts=''
> >>>>>>> extra opts=''
> >>>>>>> mknod07 1 TPASS : mknod failed as expected:
> >>>>>>> TEST_ERRNO=EACCES(13): Permission denied
> >>>>>>> mknod07 2 TPASS : mknod failed as expected:
> >>>>>>> TEST_ERRNO=EACCES(13): Permission denied
> >>>>>>> mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
> >>>>>>> mknod07 4 TPASS : mknod failed as expected:
> >>>>>>> TEST_ERRNO=EPERM(1): Operation not permitted
> >>>>>>> mknod07 5 TPASS : mknod failed as expected:
> >>>>>>> TEST_ERRNO=EROFS(30): Read-only file system
> >>>>>>> mknod07 6 TPASS : mknod failed as expected:
> >>>>>>> TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
> >>>>>>>
> >>>>>>>
> >>>>>>> setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6,
> >>>>>>> ns_types[0]=0x8000000
> >>>>>>> setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
> >>>>>>> setns01 0 TINFO : ns_name=net, ns_fds[2]=8,
> >>>>>>> ns_types[2]=0x40000000
> >>>>>>> setns01 0 TINFO : ns_name=pid, ns_fds[3]=9,
> >>>>>>> ns_types[3]=0x20000000
> >>>>>>> setns01 0 TINFO : ns_name=uts, ns_fds[4]=10,
> >>>>>>> ns_types[4]=0x4000000
> >>>>>>> setns01 0 TINFO : setns(-1, 0x8000000)
> >>>>>>> setns01 1 TPASS : invalid fd exp_errno=9
> >>>>>>> setns01 0 TINFO : setns(-1, 0x20000)
> >>>>>>> setns01 2 TPASS : invalid fd exp_errno=9
> >>>>>>> setns01 0 TINFO : setns(-1, 0x40000000)
> >>>>>>> setns01 3 TPASS : invalid fd exp_errno=9
> >>>>>>> setns01 0 TINFO : setns(-1, 0x20000000)
> >>>>>>> setns01 4 TPASS : invalid fd exp_errno=9
> >>>>>>> setns01 0 TINFO : setns(-1, 0x4000000)
> >>>>>>> setns01 5 TPASS : invalid fd exp_errno=9
> >>>>>>> setns01 0 TINFO : setns(11, 0x8000000)
> >>>>>>> setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>>>> errno=EBADF(9): Bad file descriptor
> >>>>>>> setns01 0 TINFO : setns(11, 0x20000)
> >>>>>>> setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>>>> errno=EBADF(9): Bad file descriptor
> >>>>>>> setns01 0 TINFO : setns(11, 0x40000000)
> >>>>>>> setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>>>> errno=EBADF(9): Bad file descriptor
> >>>>>>> setns01 0 TINFO : setns(11, 0x20000000)
> >>>>>>> setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>>>> errno=EBADF(9): Bad file descriptor
> >>>>>>> setns01 0 TINFO : setns(11, 0x4000000)
> >>>>>>> setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>>>> errno=EBADF(9): Bad file descriptor
> >>>>>>>
> >>>>>>> Full test log link,
> >>>>>>> https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
> >>>>>>>
> >>>>>>> test results comparison shows this test case started failing from
> >>>>>>> June-2-2020
> >>>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
> >>>>>>>
> >>>>>>>
> >>>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
> >>>>>>>
> >>>>>>>
> >>>>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> --
> >>>>>>> Linaro LKFT
> >>>>>>> https://lkft.linaro.org
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>
> >>
> >
> >
>
>