2021-01-25 10:07:43

by Adrien Grassein

[permalink] [raw]
Subject: Re: [PATCH] regulator: pf8x00: set ramp_delay for bucks

Le lun. 25 janv. 2021 à 10:27, Christoph Fritz
<[email protected]> a écrit :
>
> This patch sets ramp_delay for bucks to the max value given by the
> datasheet.
>
> Signed-off-by: Christoph Fritz <[email protected]>
> ---
> drivers/regulator/pf8x00-regulator.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
> index 1e5582d73405..edf5c88bf43e 100644
> --- a/drivers/regulator/pf8x00-regulator.c
> +++ b/drivers/regulator/pf8x00-regulator.c
> @@ -351,6 +351,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
> .type = REGULATOR_VOLTAGE, \
> .id = PF8X00_BUCK ## _id, \
> .owner = THIS_MODULE, \
> + .ramp_delay = 19000, \
> .linear_ranges = pf8x00_sw1_to_6_voltages, \
> .n_linear_ranges = \
> ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
> @@ -381,6 +382,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
> .type = REGULATOR_VOLTAGE, \
> .id = PF8X00_BUCK7, \
> .owner = THIS_MODULE, \
> + .ramp_delay = 19000, \
> .volt_table = voltages, \
> .vsel_reg = (base) + SW_RUN_VOLT, \
> .vsel_mask = 0xff, \
> --
> 2.29.2
>
>
Reviewed-by: Adrien Grassein <[email protected]>


Thanks,