LinuxLists.cc - [PATCH] dt-bindings: Fix dtc warnings in examples

2020-02-21 22:27:37

Subject: [PATCH] dt-bindings: Fix dtc warnings in examples

Fix all the warnings in the DT binding schema examples when built with
'W=1'. This is in preparation to make that the default for examples.

Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Sam Ravnborg <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Bartosz Golaszewski <[email protected]>
Cc: Lee Jones <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/arm/stm32/st,mlahb.yaml | 2 +-
.../clock/allwinner,sun4i-a10-osc-clk.yaml | 2 +-
.../bindings/clock/allwinner,sun9i-a80-gt-clk.yaml | 2 +-
.../display/allwinner,sun4i-a10-tv-encoder.yaml | 6 +-----
.../bindings/display/bridge/anx6345.yaml | 10 ++--------
.../display/panel/leadtek,ltk500hd1829.yaml | 2 ++
.../bindings/display/panel/xinpeng,xpp055c272.yaml | 2 ++
.../bindings/display/simple-framebuffer.yaml | 6 +-----
.../devicetree/bindings/dma/ti/k3-udma.yaml | 14 +-------------
.../devicetree/bindings/gpu/arm,mali-bifrost.yaml | 14 +++++++-------
.../devicetree/bindings/gpu/arm,mali-midgard.yaml | 14 +++++++-------
.../bindings/iio/adc/samsung,exynos-adc.yaml | 2 +-
.../bindings/input/touchscreen/goodix.yaml | 2 +-
.../devicetree/bindings/media/ti,cal.yaml | 2 +-
.../devicetree/bindings/mfd/max77650.yaml | 4 ++--
.../devicetree/bindings/mmc/mmc-controller.yaml | 1 +
Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++
.../bindings/phy/allwinner,sun4i-a10-usb-phy.yaml | 2 +-
.../bindings/pinctrl/st,stm32-pinctrl.yaml | 2 +-
.../devicetree/bindings/regulator/regulator.yaml | 2 +-
.../sram/allwinner,sun4i-a10-system-control.yaml | 2 +-
.../bindings/timer/allwinner,sun4i-a10-timer.yaml | 2 +-
22 files changed, 39 insertions(+), 58 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
index 68917bb7c7e8..55f7938c4826 100644
--- a/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/st,mlahb.yaml
@@ -52,7 +52,7 @@ required:

examples:
- |
- mlahb: ahb {
+ mlahb: ahb@38000000 {
compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
index 69cfa4a3d562..c604822cda07 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-osc-clk.yaml
@@ -40,7 +40,7 @@ additionalProperties: false

examples:
- |
- osc24M: clk@01c20050 {
+ osc24M: clk@1c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
index 07f38def7dc3..43963c3062c8 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun9i-a80-gt-clk.yaml
@@ -41,7 +41,7 @@ additionalProperties: false

examples:
- |
- clk@0600005c {
+ clk@600005c {
#clock-cells = <0>;
compatible = "allwinner,sun9i-a80-gt-clk";
reg = <0x0600005c 0x4>;
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index 5d5d39665119..6009324be967 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -49,11 +49,7 @@ examples:
resets = <&tcon_ch0_clk 0>;

port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- tve0_in_tcon0: endpoint@0 {
- reg = <0>;
+ tve0_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_tve0>;
};
};
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 6d72b3d11fbc..c21103869923 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -79,21 +79,15 @@ examples:
#size-cells = <0>;

anx6345_in: port@0 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <0>;
- anx6345_in_tcon0: endpoint@0 {
- reg = <0>;
+ anx6345_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
};

anx6345_out: port@1 {
- #address-cells = <1>;
- #size-cells = <0>;
reg = <1>;
- anx6345_out_panel: endpoint@0 {
- reg = <0>;
+ anx6345_out_panel: endpoint {
remote-endpoint = <&panel_in_edp>;
};
};
diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
index 4ebcea7d0c63..a614644c9849 100644
--- a/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml
@@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "leadtek,ltk500hd1829";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
index 186e5e1c8fa3..22c91beb0541 100644
--- a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
+++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
@@ -37,6 +37,8 @@ examples:
dsi@ff450000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0xff450000 0x1000>;
+
panel@0 {
compatible = "xinpeng,xpp055c272";
reg = <0>;
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index 678776b6012a..1db608c9eef5 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -174,10 +174,6 @@ examples:
};
};

- soc@1c00000 {
- lcdc0: lcdc@1c0c000 {
- compatible = "allwinner,sun4i-a10-lcdc";
- };
- };
+ lcdc0: lcdc { };

...
diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
index 8b5c346f23f6..34780d7535b8 100644
--- a/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
+++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.yaml
@@ -143,7 +143,7 @@ examples:
#size-cells = <2>;
dma-coherent;
dma-ranges;
- ranges;
+ ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0x05000000>;

ti,sci-dev-id = <118>;

@@ -169,16 +169,4 @@ examples:
ti,sci-rm-range-rflow = <0x6>; /* GP RFLOW */
};
};
-
- mcasp0: mcasp@02B00000 {
- dmas = <&main_udmap 0xc400>, <&main_udmap 0x4400>;
- dma-names = "tx", "rx";
- };
-
- crypto: crypto@4E00000 {
- compatible = "ti,sa2ul-crypto";
-
- dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>, <&main_udmap 0x4001>;
- dma-names = "tx", "rx1", "rx2";
- };
};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index 4ea6a8789699..e8b99adcb1bd 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -84,31 +84,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";

- opp@533000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@450000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@350000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@266000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 36f59b3ade71..8d966f3ff3db 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -138,31 +138,31 @@ examples:
gpu_opp_table: opp_table0 {
compatible = "operating-points-v2";

- opp@533000000 {
+ opp-533000000 {
opp-hz = /bits/ 64 <533000000>;
opp-microvolt = <1250000>;
};
- opp@450000000 {
+ opp-450000000 {
opp-hz = /bits/ 64 <450000000>;
opp-microvolt = <1150000>;
};
- opp@400000000 {
+ opp-400000000 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1125000>;
};
- opp@350000000 {
+ opp-350000000 {
opp-hz = /bits/ 64 <350000000>;
opp-microvolt = <1075000>;
};
- opp@266000000 {
+ opp-266000000 {
opp-hz = /bits/ 64 <266000000>;
opp-microvolt = <1025000>;
};
- opp@160000000 {
+ opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-microvolt = <925000>;
};
- opp@100000000 {
+ opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
opp-microvolt = <912500>;
};
diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index f46de17c0878..cc3c8ea6a894 100644
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@ -123,7 +123,7 @@ examples:
samsung,syscon-phandle = <&pmu_system_controller>;

/* NTC thermistor is a hwmon device */
- ncp15wb473@0 {
+ ncp15wb473 {
compatible = "murata,ncp15wb473";
pullup-uv = <1800000>;
pullup-ohm = <47000>;
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
index d7c3262b2494..c99ed3934d7e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
@@ -62,7 +62,7 @@ required:

examples:
- |
- i2c@00000000 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
gt928@5d {
diff --git a/Documentation/devicetree/bindings/media/ti,cal.yaml b/Documentation/devicetree/bindings/media/ti,cal.yaml
index 1ea784179536..5e066629287d 100644
--- a/Documentation/devicetree/bindings/media/ti,cal.yaml
+++ b/Documentation/devicetree/bindings/media/ti,cal.yaml
@@ -177,7 +177,7 @@ examples:
};
};

- i2c5: i2c@4807c000 {
+ i2c {
clock-frequency = <400000>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
index 4a70f875a6eb..480385789394 100644
--- a/Documentation/devicetree/bindings/mfd/max77650.yaml
+++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
@@ -97,14 +97,14 @@ examples:
regulators {
compatible = "maxim,max77650-regulator";

- max77650_ldo: regulator@0 {
+ max77650_ldo: regulator-ldo {
regulator-compatible = "ldo";
regulator-name = "max77650-ldo";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <2937500>;
};

- max77650_sbb0: regulator@1 {
+ max77650_sbb0: regulator-sbb0 {
regulator-compatible = "sbb0";
regulator-name = "max77650-sbb0";
regulator-min-microvolt = <800000>;
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index 3c0df4016a12..8fded83c519a 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -370,6 +370,7 @@ examples:
mmc3: mmc@1c12000 {
#address-cells = <1>;
#size-cells = <0>;
+ reg = <0x1c12000 0x200>;
pinctrl-names = "default";
pinctrl-0 = <&mmc3_pins_a>;
vmmc-supply = <&reg_vmmc3>;
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
index b43c6c65294e..65980224d550 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml
@@ -76,6 +76,8 @@ examples:
qfprom: eeprom@700000 {
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x00700000 0x100000>;
+
wp-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;

/* ... */
diff --git a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
index 020ef9e4c411..94ac23687b7e 100644
--- a/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/allwinner,sun4i-a10-usb-phy.yaml
@@ -86,7 +86,7 @@ examples:
#include <dt-bindings/clock/sun4i-a10-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>

- usbphy: phy@01c13400 {
+ usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun4i-a10-usb-phy";
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index 754ea7ab040a..ef4de32cb17c 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -248,7 +248,7 @@ examples:
};

//Example 3 pin groups
- pinctrl@60020000 {
+ pinctrl {
usart1_pins_a: usart1-0 {
pins1 {
pinmux = <STM32_PINMUX('A', 9, AF7)>;
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 92ff2e8ad572..91a39a33000b 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -191,7 +191,7 @@ patternProperties:

examples:
- |
- xyzreg: regulator@0 {
+ xyzreg: regulator {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
index 80bac7a182d5..4b5509436588 100644
--- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
+++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml
@@ -125,7 +125,7 @@ examples:
#size-cells = <1>;
ranges;

- sram_a: sram@00000000 {
+ sram_a: sram@0 {
compatible = "mmio-sram";
reg = <0x00000000 0xc000>;
#address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
index 23e989e09766..d918cee100ac 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml
@@ -87,7 +87,7 @@ additionalProperties: false

examples:
- |
- timer {
+ timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x400>;
interrupts = <22>,
--
2.20.1

2020-02-21 23:57:17

by Stephen Boyd

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

Quoting Rob Herring (2020-02-21 14:27:10)
> Fix all the warnings in the DT binding schema examples when built with
> 'W=1'. This is in preparation to make that the default for examples.
>
> Cc: Maxime Coquelin <[email protected]>
> Cc: Alexandre Torgue <[email protected]>
> Cc: Stephen Boyd <[email protected]>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Kukjin Kim <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Dmitry Torokhov <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: Ulf Hansson <[email protected]>
> Cc: Srinivas Kandagatla <[email protected]>
> Cc: Kishon Vijay Abraham I <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../clock/allwinner,sun4i-a10-osc-clk.yaml | 2 +-
> .../bindings/clock/allwinner,sun9i-a80-gt-clk.yaml | 2 +-

Acked-by: Stephen Boyd <[email protected]>

2020-02-22 12:04:11

by Linus Walleij

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

On Fri, Feb 21, 2020 at 11:27 PM Rob Herring <[email protected]> wrote:

> Fix all the warnings in the DT binding schema examples when built with
> 'W=1'. This is in preparation to make that the default for examples.
>
(...)
> Signed-off-by: Rob Herring <[email protected]>

Reviewed-by: Linus Walleij <[email protected]>

Yours,
Linus Walleij

2020-02-22 12:10:02

by Sam Ravnborg

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

Hi Rob.

On Fri, Feb 21, 2020 at 04:27:10PM -0600, Rob Herring wrote:
> Fix all the warnings in the DT binding schema examples when built with
> 'W=1'. This is in preparation to make that the default for examples.

Browsed it all - looks good.

Acked-by: Sam Ravnborg <[email protected]>

2020-02-22 13:56:51

by Maxime Ripard

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

2020-02-24 04:37:41

by Vinod Koul

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

On 21-02-20, 16:27, Rob Herring wrote:
> Fix all the warnings in the DT binding schema examples when built with
> 'W=1'. This is in preparation to make that the default for examples.
>

For this:

> .../devicetree/bindings/dma/ti/k3-udma.yaml | 14 +-------------

Acked-by: Vinod Koul <[email protected]>

--
~Vinod

2020-02-24 08:37:24

by Lee Jones

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

On Fri, 21 Feb 2020, Rob Herring wrote:

> Fix all the warnings in the DT binding schema examples when built with
> 'W=1'. This is in preparation to make that the default for examples.
>
> Cc: Maxime Coquelin <[email protected]>
> Cc: Alexandre Torgue <[email protected]>
> Cc: Stephen Boyd <[email protected]>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Kukjin Kim <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Dmitry Torokhov <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: Ulf Hansson <[email protected]>
> Cc: Srinivas Kandagatla <[email protected]>
> Cc: Kishon Vijay Abraham I <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/stm32/st,mlahb.yaml | 2 +-
> .../clock/allwinner,sun4i-a10-osc-clk.yaml | 2 +-
> .../bindings/clock/allwinner,sun9i-a80-gt-clk.yaml | 2 +-
> .../display/allwinner,sun4i-a10-tv-encoder.yaml | 6 +-----
> .../bindings/display/bridge/anx6345.yaml | 10 ++--------
> .../display/panel/leadtek,ltk500hd1829.yaml | 2 ++
> .../bindings/display/panel/xinpeng,xpp055c272.yaml | 2 ++
> .../bindings/display/simple-framebuffer.yaml | 6 +-----
> .../devicetree/bindings/dma/ti/k3-udma.yaml | 14 +-------------
> .../devicetree/bindings/gpu/arm,mali-bifrost.yaml | 14 +++++++-------
> .../devicetree/bindings/gpu/arm,mali-midgard.yaml | 14 +++++++-------
> .../bindings/iio/adc/samsung,exynos-adc.yaml | 2 +-
> .../bindings/input/touchscreen/goodix.yaml | 2 +-
> .../devicetree/bindings/media/ti,cal.yaml | 2 +-

> .../devicetree/bindings/mfd/max77650.yaml | 4 ++--

Acked-by: Lee Jones <[email protected]>

> .../devicetree/bindings/mmc/mmc-controller.yaml | 1 +
> Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++
> .../bindings/phy/allwinner,sun4i-a10-usb-phy.yaml | 2 +-
> .../bindings/pinctrl/st,stm32-pinctrl.yaml | 2 +-
> .../devicetree/bindings/regulator/regulator.yaml | 2 +-
> .../sram/allwinner,sun4i-a10-system-control.yaml | 2 +-
> .../bindings/timer/allwinner,sun4i-a10-timer.yaml | 2 +-
> 22 files changed, 39 insertions(+), 58 deletions(-)

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

2020-02-24 11:19:28

by Srinivas Kandagatla

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

On 21/02/2020 22:27, Rob Herring wrote:
> Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++
for nvmem changes,

Acked-by: Srinivas Kandagatla <[email protected]>

2020-02-24 11:37:19

by Mark Brown

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

Attachments:

(No filename) (253.00 B)
signature.asc (499.00 B)
Download all attachments

2020-02-24 13:23:29

by Thierry Reding

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

On Fri, Feb 21, 2020 at 04:27:10PM -0600, Rob Herring wrote:
> Fix all the warnings in the DT binding schema examples when built with
> 'W=1'. This is in preparation to make that the default for examples.
>
> Cc: Maxime Coquelin <[email protected]>
> Cc: Alexandre Torgue <[email protected]>
> Cc: Stephen Boyd <[email protected]>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Kukjin Kim <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Dmitry Torokhov <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: Ulf Hansson <[email protected]>
> Cc: Srinivas Kandagatla <[email protected]>
> Cc: Kishon Vijay Abraham I <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Signed-off-by: Rob Herring <[email protected]>
> ---
> .../devicetree/bindings/arm/stm32/st,mlahb.yaml | 2 +-
> .../clock/allwinner,sun4i-a10-osc-clk.yaml | 2 +-
> .../bindings/clock/allwinner,sun9i-a80-gt-clk.yaml | 2 +-
> .../display/allwinner,sun4i-a10-tv-encoder.yaml | 6 +-----
> .../bindings/display/bridge/anx6345.yaml | 10 ++--------
> .../display/panel/leadtek,ltk500hd1829.yaml | 2 ++
> .../bindings/display/panel/xinpeng,xpp055c272.yaml | 2 ++
> .../bindings/display/simple-framebuffer.yaml | 6 +-----
> .../devicetree/bindings/dma/ti/k3-udma.yaml | 14 +-------------
> .../devicetree/bindings/gpu/arm,mali-bifrost.yaml | 14 +++++++-------
> .../devicetree/bindings/gpu/arm,mali-midgard.yaml | 14 +++++++-------
> .../bindings/iio/adc/samsung,exynos-adc.yaml | 2 +-
> .../bindings/input/touchscreen/goodix.yaml | 2 +-
> .../devicetree/bindings/media/ti,cal.yaml | 2 +-
> .../devicetree/bindings/mfd/max77650.yaml | 4 ++--
> .../devicetree/bindings/mmc/mmc-controller.yaml | 1 +
> Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++
> .../bindings/phy/allwinner,sun4i-a10-usb-phy.yaml | 2 +-
> .../bindings/pinctrl/st,stm32-pinctrl.yaml | 2 +-
> .../devicetree/bindings/regulator/regulator.yaml | 2 +-
> .../sram/allwinner,sun4i-a10-system-control.yaml | 2 +-
> .../bindings/timer/allwinner,sun4i-a10-timer.yaml | 2 +-
> 22 files changed, 39 insertions(+), 58 deletions(-)

Acked-by: Thierry Reding <[email protected]>

Attachments:

(No filename) (2.65 kB)
signature.asc (849.00 B)
Download all attachments

2020-02-24 15:42:08

by Bartosz Golaszewski

[permalink] [raw]

Subject: Re: [PATCH] dt-bindings: Fix dtc warnings in examples

pt., 21 lut 2020 o 23:27 Rob Herring <[email protected]> napisał(a):
>
> Fix all the warnings in the DT binding schema examples when built with
> 'W=1'. This is in preparation to make that the default for examples.
>
> Cc: Maxime Coquelin <[email protected]>
> Cc: Alexandre Torgue <[email protected]>
> Cc: Stephen Boyd <[email protected]>
> Cc: Maxime Ripard <[email protected]>
> Cc: Chen-Yu Tsai <[email protected]>
> Cc: Thierry Reding <[email protected]>
> Cc: Sam Ravnborg <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: Jonathan Cameron <[email protected]>
> Cc: Kukjin Kim <[email protected]>
> Cc: Krzysztof Kozlowski <[email protected]>
> Cc: Dmitry Torokhov <[email protected]>
> Cc: Bartosz Golaszewski <[email protected]>
> Cc: Lee Jones <[email protected]>
> Cc: Ulf Hansson <[email protected]>
> Cc: Srinivas Kandagatla <[email protected]>
> Cc: Kishon Vijay Abraham I <[email protected]>
> Cc: Linus Walleij <[email protected]>
> Cc: Mark Brown <[email protected]>
> Cc: Daniel Lezcano <[email protected]>
> Signed-off-by: Rob Herring <[email protected]>

For MAX77650:

Acked-by: Bartosz Golaszewski <[email protected]>