From: Sean Wang <[email protected]>
The function, external interrupt controller, is made as an optional to
mt7622 pinctrl. But if we don't want pio behaves as an external interrupt
controller, it would lead to hw->eint not be created properly and then
will cause 'kernel NULL pointer' issue when gpiochip try to call .to_irq
or .set_config. To fix it, check hw->eint before accessing the member.
[ 1.339494] Unable to handle kernel NULL pointer dereference at virtual
address 00000010
[ 1.347857] Mem abort info:
[ 1.350742] ESR = 0x96000005
[ 1.353905] Exception class = DABT (current EL), IL = 32 bits
[ 1.360024] SET = 0, FnV = 0
[ 1.363185] EA = 0, S1PTW = 0
[ 1.366431] Data abort info:
[ 1.369405] ISV = 0, ISS = 0x00000005
[ 1.373363] CM = 0, WnR = 0
[ 1.376437] [0000000000000010] user address but active_mm is swapper
[ 1.383005] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 1.388748] Modules linked in:
[ 1.391897] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #344
[ 1.398625] Hardware name: MediaTek MT7622 RFB1 board (DT)
[ 1.404279] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 1.409221] pc : mtk_eint_find_irq+0x8/0x24
[ 1.413532] lr : mtk_gpio_to_irq+0x20/0x28
[ 1.417749] sp : ffffff800801baf0
[ 1.421161] x29: ffffff800801baf0 x28: ffffff8008792f40
[ 1.426637] x27: ffffff800886b000 x26: ffffff8008615620
[ 1.432113] x25: ffffffc00e4dbdc8 x24: ffffff80087b8000
[ 1.437589] x23: ffffffc00325a000 x22: ffffffc00325a010
[ 1.443066] x21: ffffffc0033dec18 x20: 00000000ffffffea
[ 1.448542] x19: ffffffc00e4db800 x18: 0000000000000130
[ 1.454018] x17: 000000000000000e x16: 0000000000000007
[ 1.459494] x15: ffffff80085ee000 x14: 0000000000000001
[ 1.464970] x13: 0000000000000001 x12: 0000000000000010
[ 1.470446] x11: 0101010101010101 x10: 0000000000000880
[ 1.475922] x9 : ffffff800801b990 x8 : ffffffc0030688e0
[ 1.481399] x7 : ffffff80080c0660 x6 : ffffffc00e4dbbb0
[ 1.486875] x5 : 0000000000000000 x4 : 0000000000000000
[ 1.492351] x3 : ffffff80082a92f4 x2 : 00000000fffffffa
[ 1.497826] x1 : 0000000000000051 x0 : 0000000000000000
[ 1.503305] Process swapper/0 (pid: 1, stack limit = 0x0000000054e053bd)
[ 1.510210] Call trace:
[ 1.512727] mtk_eint_find_irq+0x8/0x24
[ 1.516677] mtk_gpio_to_irq+0x20/0x28
[ 1.520539] gpiod_to_irq+0x48/0x60
[ 1.524135] mmc_gpiod_request_cd_irq+0x3c/0xc4
[ 1.528804] mmc_start_host+0x6c/0x8c
[ 1.532575] mmc_add_host+0x58/0x7c
[ 1.536168] msdc_drv_probe+0x4fc/0x67c
[ 1.540121] platform_drv_probe+0x58/0xa4
[ 1.544251] driver_probe_device+0x204/0x44c
[ 1.548649] __driver_attach+0x84/0xf8
[ 1.552512] bus_for_each_dev+0x68/0xa0
[ 1.556461] driver_attach+0x20/0x28
[ 1.560142] bus_add_driver+0xec/0x240
[ 1.564002] driver_register+0x98/0xe4
[ 1.567863] __platform_driver_register+0x48/0x50
[ 1.572711] mt_msdc_driver_init+0x18/0x20
[ 1.576932] do_one_initcall+0x98/0x130
[ 1.580886] kernel_init_freeable+0x13c/0x1d4
[ 1.585375] kernel_init+0x10/0xf8
[ 1.588879] ret_from_fork+0x10/0x18
[ 1.592564] Code: a8c67bfd d65f03c0 a9bf7bfd 910003fd (f9400800)
[ 1.598849] ---[ end trace 4bbcb7bc30e98492 ]---
[ 1.603677] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 1.603677]
cc: Kevin Hilman <[email protected]>
Cc: [email protected]
Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC")
Signed-off-by: Sean Wang <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-mt7622.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7622.c b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
index ad6da11..e3f1ab2 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
@@ -1459,6 +1459,9 @@ static int mtk_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
struct mtk_pinctrl *hw = gpiochip_get_data(chip);
unsigned long eint_n;
+ if (!hw->eint)
+ return -ENOTSUPP;
+
eint_n = offset;
return mtk_eint_find_irq(hw->eint, eint_n);
@@ -1471,7 +1474,8 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
unsigned long eint_n;
u32 debounce;
- if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+ if (!hw->eint ||
+ pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
return -ENOTSUPP;
debounce = pinconf_to_config_argument(config);
--
2.7.4
On Thu, Jun 14, 2018 at 10:55 AM, <[email protected]> wrote:
> From: Sean Wang <[email protected]>
>
> The function, external interrupt controller, is made as an optional to
> mt7622 pinctrl. But if we don't want pio behaves as an external interrupt
> controller, it would lead to hw->eint not be created properly and then
> will cause 'kernel NULL pointer' issue when gpiochip try to call .to_irq
> or .set_config. To fix it, check hw->eint before accessing the member.
>
> [ 1.339494] Unable to handle kernel NULL pointer dereference at virtual
> address 00000010
> [ 1.347857] Mem abort info:
> [ 1.350742] ESR = 0x96000005
> [ 1.353905] Exception class = DABT (current EL), IL = 32 bits
> [ 1.360024] SET = 0, FnV = 0
> [ 1.363185] EA = 0, S1PTW = 0
> [ 1.366431] Data abort info:
> [ 1.369405] ISV = 0, ISS = 0x00000005
> [ 1.373363] CM = 0, WnR = 0
> [ 1.376437] [0000000000000010] user address but active_mm is swapper
> [ 1.383005] Internal error: Oops: 96000005 [#1] PREEMPT SMP
> [ 1.388748] Modules linked in:
> [ 1.391897] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #344
> [ 1.398625] Hardware name: MediaTek MT7622 RFB1 board (DT)
> [ 1.404279] pstate: 80000005 (Nzcv daif -PAN -UAO)
> [ 1.409221] pc : mtk_eint_find_irq+0x8/0x24
> [ 1.413532] lr : mtk_gpio_to_irq+0x20/0x28
> [ 1.417749] sp : ffffff800801baf0
> [ 1.421161] x29: ffffff800801baf0 x28: ffffff8008792f40
> [ 1.426637] x27: ffffff800886b000 x26: ffffff8008615620
> [ 1.432113] x25: ffffffc00e4dbdc8 x24: ffffff80087b8000
> [ 1.437589] x23: ffffffc00325a000 x22: ffffffc00325a010
> [ 1.443066] x21: ffffffc0033dec18 x20: 00000000ffffffea
> [ 1.448542] x19: ffffffc00e4db800 x18: 0000000000000130
> [ 1.454018] x17: 000000000000000e x16: 0000000000000007
> [ 1.459494] x15: ffffff80085ee000 x14: 0000000000000001
> [ 1.464970] x13: 0000000000000001 x12: 0000000000000010
> [ 1.470446] x11: 0101010101010101 x10: 0000000000000880
> [ 1.475922] x9 : ffffff800801b990 x8 : ffffffc0030688e0
> [ 1.481399] x7 : ffffff80080c0660 x6 : ffffffc00e4dbbb0
> [ 1.486875] x5 : 0000000000000000 x4 : 0000000000000000
> [ 1.492351] x3 : ffffff80082a92f4 x2 : 00000000fffffffa
> [ 1.497826] x1 : 0000000000000051 x0 : 0000000000000000
> [ 1.503305] Process swapper/0 (pid: 1, stack limit = 0x0000000054e053bd)
> [ 1.510210] Call trace:
> [ 1.512727] mtk_eint_find_irq+0x8/0x24
> [ 1.516677] mtk_gpio_to_irq+0x20/0x28
> [ 1.520539] gpiod_to_irq+0x48/0x60
> [ 1.524135] mmc_gpiod_request_cd_irq+0x3c/0xc4
> [ 1.528804] mmc_start_host+0x6c/0x8c
> [ 1.532575] mmc_add_host+0x58/0x7c
> [ 1.536168] msdc_drv_probe+0x4fc/0x67c
> [ 1.540121] platform_drv_probe+0x58/0xa4
> [ 1.544251] driver_probe_device+0x204/0x44c
> [ 1.548649] __driver_attach+0x84/0xf8
> [ 1.552512] bus_for_each_dev+0x68/0xa0
> [ 1.556461] driver_attach+0x20/0x28
> [ 1.560142] bus_add_driver+0xec/0x240
> [ 1.564002] driver_register+0x98/0xe4
> [ 1.567863] __platform_driver_register+0x48/0x50
> [ 1.572711] mt_msdc_driver_init+0x18/0x20
> [ 1.576932] do_one_initcall+0x98/0x130
> [ 1.580886] kernel_init_freeable+0x13c/0x1d4
> [ 1.585375] kernel_init+0x10/0xf8
> [ 1.588879] ret_from_fork+0x10/0x18
> [ 1.592564] Code: a8c67bfd d65f03c0 a9bf7bfd 910003fd (f9400800)
> [ 1.598849] ---[ end trace 4bbcb7bc30e98492 ]---
> [ 1.603677] Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b
> [ 1.603677]
>
> cc: Kevin Hilman <[email protected]>
> Cc: [email protected]
> Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC")
> Signed-off-by: Sean Wang <[email protected]>
Patch applied for fixes.
Yours,
Linus Walleij