Binding and driver for the Qualcomm SM8250 TLMM pinctrl block
Bjorn Andersson (1):
dt-bindings: pinctrl: qcom: Add sm8250 pinctrl bindings
Venkata Narendra Kumar Gutta (1):
pinctrl: qcom: Add sm8250 pinctrl driver.
.../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 147 ++
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-sm8250.c | 1361 +++++++++++++++++
4 files changed, 1518 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250.c
--
2.24.0
From: Venkata Narendra Kumar Gutta <[email protected]>
Add initial Qualcomm SM8250 pinctrl driver to support pin configuration
with pinctrl framework for SM8250 SoC.
Signed-off-by: Rishabh Bhatnagar <[email protected]>
Signed-off-by: Venkata Narendra Kumar Gutta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[bjorn: Regrouped functions, upstream tiles implementation, dropped
downstream-only features]
Signed-off-by: Bjorn Andersson <[email protected]>
---
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-sm8250.c | 1361 +++++++++++++++++++++++++
3 files changed, 1371 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index c5d4428f1f94..ff1ee159dca2 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -216,4 +216,13 @@ config PINCTRL_SM8150
Qualcomm Technologies Inc TLMM block found on the Qualcomm
Technologies Inc SM8150 platform.
+config PINCTRL_SM8250
+ tristate "Qualcomm Technologies Inc SM8250 pin controller driver"
+ depends on GPIOLIB && OF
+ select PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm Technologies Inc TLMM block found on the Qualcomm
+ Technologies Inc SM8250 platform.
+
endif
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index d9e09045a776..061ec9fb659b 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -26,3 +26,4 @@ obj-$(CONFIG_PINCTRL_SC7180) += pinctrl-sc7180.o
obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o
obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
+obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250.c b/drivers/pinctrl/qcom/pinctrl-sm8250.c
new file mode 100644
index 000000000000..a660f1274b66
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-sm8250.c
@@ -0,0 +1,1361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const char * const sm8250_tiles[] = {
+ "west",
+ "south",
+ "north",
+};
+
+enum {
+ WEST,
+ SOUTH,
+ NORTH,
+};
+
+#define FUNCTION(fname) \
+ [msm_mux_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define REG_SIZE 0x1000
+#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ msm_mux_gpio, /* gpio mode */ \
+ msm_mux_##f1, \
+ msm_mux_##f2, \
+ msm_mux_##f3, \
+ msm_mux_##f4, \
+ msm_mux_##f5, \
+ msm_mux_##f6, \
+ msm_mux_##f7, \
+ msm_mux_##f8, \
+ msm_mux_##f9 \
+ }, \
+ .nfuncs = 10, \
+ .ctl_reg = REG_SIZE * id, \
+ .io_reg = REG_SIZE * id + 0x4, \
+ .intr_cfg_reg = REG_SIZE * id + 0x8, \
+ .intr_status_reg = REG_SIZE * id + 0xc, \
+ .intr_target_reg = REG_SIZE * id + 0x8, \
+ .tile = _tile, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_target_kpss_val = 3, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .tile = NORTH, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+#define UFS_RESET(pg_name, offset) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = offset, \
+ .io_reg = offset + 0x4, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .tile = SOUTH, \
+ .mux_bit = -1, \
+ .pull_bit = 3, \
+ .drv_bit = 0, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = 0, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+static const struct pinctrl_pin_desc sm8250_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+ PINCTRL_PIN(70, "GPIO_70"),
+ PINCTRL_PIN(71, "GPIO_71"),
+ PINCTRL_PIN(72, "GPIO_72"),
+ PINCTRL_PIN(73, "GPIO_73"),
+ PINCTRL_PIN(74, "GPIO_74"),
+ PINCTRL_PIN(75, "GPIO_75"),
+ PINCTRL_PIN(76, "GPIO_76"),
+ PINCTRL_PIN(77, "GPIO_77"),
+ PINCTRL_PIN(78, "GPIO_78"),
+ PINCTRL_PIN(79, "GPIO_79"),
+ PINCTRL_PIN(80, "GPIO_80"),
+ PINCTRL_PIN(81, "GPIO_81"),
+ PINCTRL_PIN(82, "GPIO_82"),
+ PINCTRL_PIN(83, "GPIO_83"),
+ PINCTRL_PIN(84, "GPIO_84"),
+ PINCTRL_PIN(85, "GPIO_85"),
+ PINCTRL_PIN(86, "GPIO_86"),
+ PINCTRL_PIN(87, "GPIO_87"),
+ PINCTRL_PIN(88, "GPIO_88"),
+ PINCTRL_PIN(89, "GPIO_89"),
+ PINCTRL_PIN(90, "GPIO_90"),
+ PINCTRL_PIN(91, "GPIO_91"),
+ PINCTRL_PIN(92, "GPIO_92"),
+ PINCTRL_PIN(93, "GPIO_93"),
+ PINCTRL_PIN(94, "GPIO_94"),
+ PINCTRL_PIN(95, "GPIO_95"),
+ PINCTRL_PIN(96, "GPIO_96"),
+ PINCTRL_PIN(97, "GPIO_97"),
+ PINCTRL_PIN(98, "GPIO_98"),
+ PINCTRL_PIN(99, "GPIO_99"),
+ PINCTRL_PIN(100, "GPIO_100"),
+ PINCTRL_PIN(101, "GPIO_101"),
+ PINCTRL_PIN(102, "GPIO_102"),
+ PINCTRL_PIN(103, "GPIO_103"),
+ PINCTRL_PIN(104, "GPIO_104"),
+ PINCTRL_PIN(105, "GPIO_105"),
+ PINCTRL_PIN(106, "GPIO_106"),
+ PINCTRL_PIN(107, "GPIO_107"),
+ PINCTRL_PIN(108, "GPIO_108"),
+ PINCTRL_PIN(109, "GPIO_109"),
+ PINCTRL_PIN(110, "GPIO_110"),
+ PINCTRL_PIN(111, "GPIO_111"),
+ PINCTRL_PIN(112, "GPIO_112"),
+ PINCTRL_PIN(113, "GPIO_113"),
+ PINCTRL_PIN(114, "GPIO_114"),
+ PINCTRL_PIN(115, "GPIO_115"),
+ PINCTRL_PIN(116, "GPIO_116"),
+ PINCTRL_PIN(117, "GPIO_117"),
+ PINCTRL_PIN(118, "GPIO_118"),
+ PINCTRL_PIN(119, "GPIO_119"),
+ PINCTRL_PIN(120, "GPIO_120"),
+ PINCTRL_PIN(121, "GPIO_121"),
+ PINCTRL_PIN(122, "GPIO_122"),
+ PINCTRL_PIN(123, "GPIO_123"),
+ PINCTRL_PIN(124, "GPIO_124"),
+ PINCTRL_PIN(125, "GPIO_125"),
+ PINCTRL_PIN(126, "GPIO_126"),
+ PINCTRL_PIN(127, "GPIO_127"),
+ PINCTRL_PIN(128, "GPIO_128"),
+ PINCTRL_PIN(129, "GPIO_129"),
+ PINCTRL_PIN(130, "GPIO_130"),
+ PINCTRL_PIN(131, "GPIO_131"),
+ PINCTRL_PIN(132, "GPIO_132"),
+ PINCTRL_PIN(133, "GPIO_133"),
+ PINCTRL_PIN(134, "GPIO_134"),
+ PINCTRL_PIN(135, "GPIO_135"),
+ PINCTRL_PIN(136, "GPIO_136"),
+ PINCTRL_PIN(137, "GPIO_137"),
+ PINCTRL_PIN(138, "GPIO_138"),
+ PINCTRL_PIN(139, "GPIO_139"),
+ PINCTRL_PIN(140, "GPIO_140"),
+ PINCTRL_PIN(141, "GPIO_141"),
+ PINCTRL_PIN(142, "GPIO_142"),
+ PINCTRL_PIN(143, "GPIO_143"),
+ PINCTRL_PIN(144, "GPIO_144"),
+ PINCTRL_PIN(145, "GPIO_145"),
+ PINCTRL_PIN(146, "GPIO_146"),
+ PINCTRL_PIN(147, "GPIO_147"),
+ PINCTRL_PIN(148, "GPIO_148"),
+ PINCTRL_PIN(149, "GPIO_149"),
+ PINCTRL_PIN(150, "GPIO_150"),
+ PINCTRL_PIN(151, "GPIO_151"),
+ PINCTRL_PIN(152, "GPIO_152"),
+ PINCTRL_PIN(153, "GPIO_153"),
+ PINCTRL_PIN(154, "GPIO_154"),
+ PINCTRL_PIN(155, "GPIO_155"),
+ PINCTRL_PIN(156, "GPIO_156"),
+ PINCTRL_PIN(157, "GPIO_157"),
+ PINCTRL_PIN(158, "GPIO_158"),
+ PINCTRL_PIN(159, "GPIO_159"),
+ PINCTRL_PIN(160, "GPIO_160"),
+ PINCTRL_PIN(161, "GPIO_161"),
+ PINCTRL_PIN(162, "GPIO_162"),
+ PINCTRL_PIN(163, "GPIO_163"),
+ PINCTRL_PIN(164, "GPIO_164"),
+ PINCTRL_PIN(165, "GPIO_165"),
+ PINCTRL_PIN(166, "GPIO_166"),
+ PINCTRL_PIN(167, "GPIO_167"),
+ PINCTRL_PIN(168, "GPIO_168"),
+ PINCTRL_PIN(169, "GPIO_169"),
+ PINCTRL_PIN(170, "GPIO_170"),
+ PINCTRL_PIN(171, "GPIO_171"),
+ PINCTRL_PIN(172, "GPIO_172"),
+ PINCTRL_PIN(173, "GPIO_173"),
+ PINCTRL_PIN(174, "GPIO_174"),
+ PINCTRL_PIN(175, "GPIO_175"),
+ PINCTRL_PIN(176, "GPIO_176"),
+ PINCTRL_PIN(177, "GPIO_177"),
+ PINCTRL_PIN(178, "GPIO_178"),
+ PINCTRL_PIN(179, "GPIO_179"),
+ PINCTRL_PIN(180, "SDC2_CLK"),
+ PINCTRL_PIN(181, "SDC2_CMD"),
+ PINCTRL_PIN(182, "SDC2_DATA"),
+ PINCTRL_PIN(183, "UFS_RESET"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+ static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+DECLARE_MSM_GPIO_PINS(146);
+DECLARE_MSM_GPIO_PINS(147);
+DECLARE_MSM_GPIO_PINS(148);
+DECLARE_MSM_GPIO_PINS(149);
+DECLARE_MSM_GPIO_PINS(150);
+DECLARE_MSM_GPIO_PINS(151);
+DECLARE_MSM_GPIO_PINS(152);
+DECLARE_MSM_GPIO_PINS(153);
+DECLARE_MSM_GPIO_PINS(154);
+DECLARE_MSM_GPIO_PINS(155);
+DECLARE_MSM_GPIO_PINS(156);
+DECLARE_MSM_GPIO_PINS(157);
+DECLARE_MSM_GPIO_PINS(158);
+DECLARE_MSM_GPIO_PINS(159);
+DECLARE_MSM_GPIO_PINS(160);
+DECLARE_MSM_GPIO_PINS(161);
+DECLARE_MSM_GPIO_PINS(162);
+DECLARE_MSM_GPIO_PINS(163);
+DECLARE_MSM_GPIO_PINS(164);
+DECLARE_MSM_GPIO_PINS(165);
+DECLARE_MSM_GPIO_PINS(166);
+DECLARE_MSM_GPIO_PINS(167);
+DECLARE_MSM_GPIO_PINS(168);
+DECLARE_MSM_GPIO_PINS(169);
+DECLARE_MSM_GPIO_PINS(170);
+DECLARE_MSM_GPIO_PINS(171);
+DECLARE_MSM_GPIO_PINS(172);
+DECLARE_MSM_GPIO_PINS(173);
+DECLARE_MSM_GPIO_PINS(174);
+DECLARE_MSM_GPIO_PINS(175);
+DECLARE_MSM_GPIO_PINS(176);
+DECLARE_MSM_GPIO_PINS(177);
+DECLARE_MSM_GPIO_PINS(178);
+DECLARE_MSM_GPIO_PINS(179);
+
+static const unsigned int ufs_reset_pins[] = { 180 };
+static const unsigned int sdc2_clk_pins[] = { 181 };
+static const unsigned int sdc2_cmd_pins[] = { 182 };
+static const unsigned int sdc2_data_pins[] = { 183 };
+
+enum sm8250_functions {
+ msm_mux_aoss_cti,
+ msm_mux_atest,
+ msm_mux_audio_ref,
+ msm_mux_cam_mclk,
+ msm_mux_cci_async,
+ msm_mux_cci_i2c,
+ msm_mux_cci_timer0,
+ msm_mux_cci_timer1,
+ msm_mux_cci_timer2,
+ msm_mux_cci_timer3,
+ msm_mux_cci_timer4,
+ msm_mux_cri_trng,
+ msm_mux_cri_trng0,
+ msm_mux_cri_trng1,
+ msm_mux_dbg_out,
+ msm_mux_ddr_bist,
+ msm_mux_ddr_pxi0,
+ msm_mux_ddr_pxi1,
+ msm_mux_ddr_pxi2,
+ msm_mux_ddr_pxi3,
+ msm_mux_dp_hot,
+ msm_mux_dp_lcd,
+ msm_mux_gcc_gp1,
+ msm_mux_gcc_gp2,
+ msm_mux_gcc_gp3,
+ msm_mux_gpio,
+ msm_mux_ibi_i3c,
+ msm_mux_jitter_bist,
+ msm_mux_lpass_slimbus,
+ msm_mux_mdp_vsync,
+ msm_mux_mdp_vsync0,
+ msm_mux_mdp_vsync1,
+ msm_mux_mdp_vsync2,
+ msm_mux_mdp_vsync3,
+ msm_mux_mi2s0_data0,
+ msm_mux_mi2s0_data1,
+ msm_mux_mi2s0_sck,
+ msm_mux_mi2s0_ws,
+ msm_mux_mi2s1_data0,
+ msm_mux_mi2s1_data1,
+ msm_mux_mi2s1_sck,
+ msm_mux_mi2s1_ws,
+ msm_mux_mi2s2_data0,
+ msm_mux_mi2s2_data1,
+ msm_mux_mi2s2_sck,
+ msm_mux_mi2s2_ws,
+ msm_mux_pci_e0,
+ msm_mux_pci_e1,
+ msm_mux_pci_e2,
+ msm_mux_phase_flag,
+ msm_mux_pll_bist,
+ msm_mux_pll_bypassnl,
+ msm_mux_pll_clk,
+ msm_mux_pll_reset,
+ msm_mux_pri_mi2s,
+ msm_mux_prng_rosc,
+ msm_mux_qdss_cti,
+ msm_mux_qdss_gpio,
+ msm_mux_qspi0,
+ msm_mux_qspi1,
+ msm_mux_qspi2,
+ msm_mux_qspi3,
+ msm_mux_qspi_clk,
+ msm_mux_qspi_cs,
+ msm_mux_qup0,
+ msm_mux_qup1,
+ msm_mux_qup10,
+ msm_mux_qup11,
+ msm_mux_qup12,
+ msm_mux_qup13,
+ msm_mux_qup14,
+ msm_mux_qup15,
+ msm_mux_qup16,
+ msm_mux_qup17,
+ msm_mux_qup18,
+ msm_mux_qup19,
+ msm_mux_qup2,
+ msm_mux_qup3,
+ msm_mux_qup4,
+ msm_mux_qup5,
+ msm_mux_qup6,
+ msm_mux_qup7,
+ msm_mux_qup8,
+ msm_mux_qup9,
+ msm_mux_qup_l4,
+ msm_mux_qup_l5,
+ msm_mux_qup_l6,
+ msm_mux_sd_write,
+ msm_mux_sdc40,
+ msm_mux_sdc41,
+ msm_mux_sdc42,
+ msm_mux_sdc43,
+ msm_mux_sdc4_clk,
+ msm_mux_sdc4_cmd,
+ msm_mux_sec_mi2s,
+ msm_mux_sp_cmu,
+ msm_mux_tgu_ch0,
+ msm_mux_tgu_ch1,
+ msm_mux_tgu_ch2,
+ msm_mux_tgu_ch3,
+ msm_mux_tsense_pwm1,
+ msm_mux_tsense_pwm2,
+ msm_mux_tsif0_clk,
+ msm_mux_tsif0_data,
+ msm_mux_tsif0_en,
+ msm_mux_tsif0_error,
+ msm_mux_tsif0_sync,
+ msm_mux_tsif1_clk,
+ msm_mux_tsif1_data,
+ msm_mux_tsif1_en,
+ msm_mux_tsif1_error,
+ msm_mux_tsif1_sync,
+ msm_mux_usb2phy_ac,
+ msm_mux_usb_phy,
+ msm_mux_vsense_trigger,
+ msm_mux__,
+};
+
+static const char * const tsif1_data_groups[] = {
+ "gpio75",
+};
+static const char * const sdc41_groups[] = {
+ "gpio75",
+};
+static const char * const tsif1_sync_groups[] = {
+ "gpio76",
+};
+static const char * const sdc40_groups[] = {
+ "gpio76",
+};
+static const char * const aoss_cti_groups[] = {
+ "gpio77",
+};
+static const char * const phase_flag_groups[] = {
+ "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", "gpio50", "gpio51",
+ "gpio69", "gpio70", "gpio71", "gpio72", "gpio73", "gpio74", "gpio77",
+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+ "gpio103", "gpio104", "gpio115", "gpio116", "gpio117", "gpio118",
+ "gpio119", "gpio120", "gpio122", "gpio124", "gpio125",
+};
+static const char * const sd_write_groups[] = {
+ "gpio78",
+};
+static const char * const pci_e0_groups[] = {
+ "gpio79", "gpio80",
+};
+static const char * const pci_e1_groups[] = {
+ "gpio82", "gpio83",
+};
+static const char * const pci_e2_groups[] = {
+ "gpio85", "gpio86",
+};
+static const char * const tgu_ch0_groups[] = {
+ "gpio85",
+};
+static const char * const atest_groups[] = {
+ "gpio24", "gpio25", "gpio26", "gpio27", "gpio32", "gpio33", "gpio34",
+ "gpio35", "gpio36", "gpio37", "gpio85", "gpio86", "gpio87", "gpio88",
+ "gpio89",
+};
+static const char * const tgu_ch3_groups[] = {
+ "gpio86",
+};
+static const char * const tsif1_error_groups[] = {
+ "gpio90",
+};
+static const char * const tgu_ch1_groups[] = {
+ "gpio90",
+};
+static const char * const tsif0_error_groups[] = {
+ "gpio91",
+};
+static const char * const tgu_ch2_groups[] = {
+ "gpio91",
+};
+static const char * const cam_mclk_groups[] = {
+ "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", "gpio99", "gpio100",
+};
+static const char * const ddr_bist_groups[] = {
+ "gpio94", "gpio95", "gpio143", "gpio144",
+};
+static const char * const pll_bypassnl_groups[] = {
+ "gpio96",
+};
+static const char * const pll_reset_groups[] = {
+ "gpio97",
+};
+static const char * const cci_i2c_groups[] = {
+ "gpio101", "gpio102", "gpio103", "gpio104", "gpio105", "gpio106",
+ "gpio107", "gpio108",
+};
+static const char * const qdss_gpio_groups[] = {
+ "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", "gpio99", "gpio100",
+ "gpio101", "gpio102", "gpio103", "gpio104", "gpio105", "gpio106",
+ "gpio107", "gpio108", "gpio109", "gpio110", "gpio111", "gpio160",
+ "gpio161", "gpio162", "gpio163", "gpio164", "gpio165", "gpio166",
+ "gpio167", "gpio168", "gpio169", "gpio170", "gpio171", "gpio172",
+ "gpio173", "gpio174", "gpio175", "gpio176", "gpio177",
+};
+static const char * const gcc_gp1_groups[] = {
+ "gpio106", "gpio136",
+};
+static const char * const gcc_gp2_groups[] = {
+ "gpio107", "gpio137",
+};
+static const char * const gcc_gp3_groups[] = {
+ "gpio108", "gpio138",
+};
+static const char * const cci_timer0_groups[] = {
+ "gpio109",
+};
+static const char * const cci_timer1_groups[] = {
+ "gpio110",
+};
+static const char * const cci_timer2_groups[] = {
+ "gpio111",
+};
+static const char * const cci_timer3_groups[] = {
+ "gpio112",
+};
+static const char * const cci_async_groups[] = {
+ "gpio112", "gpio113", "gpio114",
+};
+static const char * const cci_timer4_groups[] = {
+ "gpio113",
+};
+static const char * const qup2_groups[] = {
+ "gpio115", "gpio116", "gpio117", "gpio118",
+};
+static const char * const qup3_groups[] = {
+ "gpio119", "gpio120", "gpio121", "gpio122",
+};
+static const char * const tsense_pwm1_groups[] = {
+ "gpio123",
+};
+static const char * const tsense_pwm2_groups[] = {
+ "gpio123",
+};
+static const char * const qup9_groups[] = {
+ "gpio125", "gpio126", "gpio127", "gpio128",
+};
+static const char * const qup10_groups[] = {
+ "gpio129", "gpio130", "gpio131", "gpio132",
+};
+static const char * const mi2s2_sck_groups[] = {
+ "gpio133",
+};
+static const char * const mi2s2_data0_groups[] = {
+ "gpio134",
+};
+static const char * const mi2s2_ws_groups[] = {
+ "gpio135",
+};
+static const char * const pri_mi2s_groups[] = {
+ "gpio136",
+};
+static const char * const sec_mi2s_groups[] = {
+ "gpio137",
+};
+static const char * const audio_ref_groups[] = {
+ "gpio137",
+};
+static const char * const mi2s2_data1_groups[] = {
+ "gpio137",
+};
+static const char * const mi2s0_sck_groups[] = {
+ "gpio138",
+};
+static const char * const mi2s0_data0_groups[] = {
+ "gpio139",
+};
+static const char * const mi2s0_data1_groups[] = {
+ "gpio140",
+};
+static const char * const mi2s0_ws_groups[] = {
+ "gpio141",
+};
+static const char * const lpass_slimbus_groups[] = {
+ "gpio142", "gpio143", "gpio144", "gpio145",
+};
+static const char * const mi2s1_sck_groups[] = {
+ "gpio142",
+};
+static const char * const mi2s1_data0_groups[] = {
+ "gpio143",
+};
+static const char * const mi2s1_data1_groups[] = {
+ "gpio144",
+};
+static const char * const mi2s1_ws_groups[] = {
+ "gpio145",
+};
+static const char * const cri_trng0_groups[] = {
+ "gpio159",
+};
+static const char * const cri_trng1_groups[] = {
+ "gpio160",
+};
+static const char * const cri_trng_groups[] = {
+ "gpio161",
+};
+static const char * const sp_cmu_groups[] = {
+ "gpio162",
+};
+static const char * const prng_rosc_groups[] = {
+ "gpio163",
+};
+static const char * const qup19_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+ "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+ "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+ "gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+ "gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+ "gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+ "gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+ "gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+ "gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146",
+ "gpio147", "gpio148", "gpio149", "gpio150", "gpio151", "gpio152",
+ "gpio153", "gpio154", "gpio155", "gpio156", "gpio157", "gpio158",
+ "gpio159", "gpio160", "gpio161", "gpio162", "gpio163", "gpio164",
+ "gpio165", "gpio166", "gpio167", "gpio168", "gpio169", "gpio170",
+ "gpio171", "gpio172", "gpio173", "gpio174", "gpio175", "gpio176",
+ "gpio177", "gpio178", "gpio179",
+};
+static const char * const qdss_cti_groups[] = {
+ "gpio0", "gpio2", "gpio2", "gpio44", "gpio45", "gpio46", "gpio92",
+ "gpio93",
+};
+static const char * const qup1_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7",
+};
+static const char * const ibi_i3c_groups[] = {
+ "gpio4", "gpio5", "gpio24", "gpio25", "gpio28", "gpio29", "gpio40",
+ "gpio41",
+};
+static const char * const qup_l4_groups[] = {
+ "gpio6", "gpio14", "gpio46", "gpio123",
+};
+static const char * const qup_l5_groups[] = {
+ "gpio7", "gpio15", "gpio47", "gpio124",
+};
+static const char * const qup4_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11",
+};
+static const char * const qup5_groups[] = {
+ "gpio12", "gpio13", "gpio14", "gpio15",
+};
+static const char * const qup6_groups[] = {
+ "gpio16", "gpio17", "gpio18", "gpio19",
+};
+static const char * const qup7_groups[] = {
+ "gpio20", "gpio21", "gpio22", "gpio23",
+};
+static const char * const qup8_groups[] = {
+ "gpio24", "gpio25", "gpio26", "gpio27",
+};
+static const char * const qup0_groups[] = {
+ "gpio28", "gpio29", "gpio30", "gpio31",
+};
+static const char * const qup12_groups[] = {
+ "gpio32", "gpio33", "gpio34", "gpio35",
+};
+static const char * const qup13_groups[] = {
+ "gpio36", "gpio37", "gpio38", "gpio39",
+};
+static const char * const qup14_groups[] = {
+ "gpio40", "gpio41", "gpio42", "gpio43",
+};
+static const char * const ddr_pxi3_groups[] = {
+ "gpio40", "gpio43",
+};
+static const char * const ddr_pxi1_groups[] = {
+ "gpio41", "gpio42",
+};
+static const char * const vsense_trigger_groups[] = {
+ "gpio42",
+};
+static const char * const qup15_groups[] = {
+ "gpio44", "gpio45", "gpio46", "gpio47",
+};
+static const char * const dbg_out_groups[] = {
+ "gpio44",
+};
+static const char * const qup16_groups[] = {
+ "gpio48", "gpio49", "gpio50", "gpio51",
+};
+static const char * const qup17_groups[] = {
+ "gpio52", "gpio53", "gpio54", "gpio55",
+};
+static const char * const ddr_pxi0_groups[] = {
+ "gpio52", "gpio53",
+};
+static const char * const jitter_bist_groups[] = {
+ "gpio54",
+};
+static const char * const pll_bist_groups[] = {
+ "gpio55",
+};
+static const char * const ddr_pxi2_groups[] = {
+ "gpio55", "gpio56",
+};
+static const char * const qup18_groups[] = {
+ "gpio56", "gpio57", "gpio58", "gpio59",
+};
+static const char * const qup11_groups[] = {
+ "gpio60", "gpio61", "gpio62", "gpio63",
+};
+static const char * const usb2phy_ac_groups[] = {
+ "gpio64", "gpio90",
+};
+static const char * const qup_l6_groups[] = {
+ "gpio64", "gpio77", "gpio92", "gpio93",
+};
+static const char * const usb_phy_groups[] = {
+ "gpio65",
+};
+static const char * const pll_clk_groups[] = {
+ "gpio65",
+};
+static const char * const mdp_vsync_groups[] = {
+ "gpio66", "gpio67", "gpio68", "gpio122", "gpio124",
+};
+static const char * const dp_lcd_groups[] = {
+ "gpio67",
+};
+static const char * const dp_hot_groups[] = {
+ "gpio68",
+};
+static const char * const qspi_cs_groups[] = {
+ "gpio69", "gpio75",
+};
+static const char * const tsif0_clk_groups[] = {
+ "gpio69",
+};
+static const char * const qspi0_groups[] = {
+ "gpio70",
+};
+static const char * const tsif0_en_groups[] = {
+ "gpio70",
+};
+static const char * const mdp_vsync0_groups[] = {
+ "gpio70",
+};
+static const char * const mdp_vsync1_groups[] = {
+ "gpio70",
+};
+static const char * const mdp_vsync2_groups[] = {
+ "gpio70",
+};
+static const char * const mdp_vsync3_groups[] = {
+ "gpio70",
+};
+static const char * const qspi1_groups[] = {
+ "gpio71",
+};
+static const char * const tsif0_data_groups[] = {
+ "gpio71",
+};
+static const char * const sdc4_cmd_groups[] = {
+ "gpio71",
+};
+static const char * const qspi2_groups[] = {
+ "gpio72",
+};
+static const char * const tsif0_sync_groups[] = {
+ "gpio72",
+};
+static const char * const sdc43_groups[] = {
+ "gpio72",
+};
+static const char * const qspi_clk_groups[] = {
+ "gpio73",
+};
+static const char * const tsif1_clk_groups[] = {
+ "gpio73",
+};
+static const char * const sdc4_clk_groups[] = {
+ "gpio73",
+};
+static const char * const qspi3_groups[] = {
+ "gpio74",
+};
+static const char * const tsif1_en_groups[] = {
+ "gpio74",
+};
+static const char * const sdc42_groups[] = {
+ "gpio74",
+};
+
+static const struct msm_function sm8250_functions[] = {
+ FUNCTION(aoss_cti),
+ FUNCTION(atest),
+ FUNCTION(audio_ref),
+ FUNCTION(cam_mclk),
+ FUNCTION(cci_async),
+ FUNCTION(cci_i2c),
+ FUNCTION(cci_timer0),
+ FUNCTION(cci_timer1),
+ FUNCTION(cci_timer2),
+ FUNCTION(cci_timer3),
+ FUNCTION(cci_timer4),
+ FUNCTION(cri_trng),
+ FUNCTION(cri_trng0),
+ FUNCTION(cri_trng1),
+ FUNCTION(dbg_out),
+ FUNCTION(ddr_bist),
+ FUNCTION(ddr_pxi0),
+ FUNCTION(ddr_pxi1),
+ FUNCTION(ddr_pxi2),
+ FUNCTION(ddr_pxi3),
+ FUNCTION(dp_hot),
+ FUNCTION(dp_lcd),
+ FUNCTION(gcc_gp1),
+ FUNCTION(gcc_gp2),
+ FUNCTION(gcc_gp3),
+ FUNCTION(gpio),
+ FUNCTION(ibi_i3c),
+ FUNCTION(jitter_bist),
+ FUNCTION(lpass_slimbus),
+ FUNCTION(mdp_vsync),
+ FUNCTION(mdp_vsync0),
+ FUNCTION(mdp_vsync1),
+ FUNCTION(mdp_vsync2),
+ FUNCTION(mdp_vsync3),
+ FUNCTION(mi2s0_data0),
+ FUNCTION(mi2s0_data1),
+ FUNCTION(mi2s0_sck),
+ FUNCTION(mi2s0_ws),
+ FUNCTION(mi2s1_data0),
+ FUNCTION(mi2s1_data1),
+ FUNCTION(mi2s1_sck),
+ FUNCTION(mi2s1_ws),
+ FUNCTION(mi2s2_data0),
+ FUNCTION(mi2s2_data1),
+ FUNCTION(mi2s2_sck),
+ FUNCTION(mi2s2_ws),
+ FUNCTION(pci_e0),
+ FUNCTION(pci_e1),
+ FUNCTION(pci_e2),
+ FUNCTION(phase_flag),
+ FUNCTION(pll_bist),
+ FUNCTION(pll_bypassnl),
+ FUNCTION(pll_clk),
+ FUNCTION(pll_reset),
+ FUNCTION(pri_mi2s),
+ FUNCTION(prng_rosc),
+ FUNCTION(qdss_cti),
+ FUNCTION(qdss_gpio),
+ FUNCTION(qspi0),
+ FUNCTION(qspi1),
+ FUNCTION(qspi2),
+ FUNCTION(qspi3),
+ FUNCTION(qspi_clk),
+ FUNCTION(qspi_cs),
+ FUNCTION(qup0),
+ FUNCTION(qup1),
+ FUNCTION(qup10),
+ FUNCTION(qup11),
+ FUNCTION(qup12),
+ FUNCTION(qup13),
+ FUNCTION(qup14),
+ FUNCTION(qup15),
+ FUNCTION(qup16),
+ FUNCTION(qup17),
+ FUNCTION(qup18),
+ FUNCTION(qup19),
+ FUNCTION(qup2),
+ FUNCTION(qup3),
+ FUNCTION(qup4),
+ FUNCTION(qup5),
+ FUNCTION(qup6),
+ FUNCTION(qup7),
+ FUNCTION(qup8),
+ FUNCTION(qup9),
+ FUNCTION(qup_l4),
+ FUNCTION(qup_l5),
+ FUNCTION(qup_l6),
+ FUNCTION(sd_write),
+ FUNCTION(sdc40),
+ FUNCTION(sdc41),
+ FUNCTION(sdc42),
+ FUNCTION(sdc43),
+ FUNCTION(sdc4_clk),
+ FUNCTION(sdc4_cmd),
+ FUNCTION(sec_mi2s),
+ FUNCTION(sp_cmu),
+ FUNCTION(tgu_ch0),
+ FUNCTION(tgu_ch1),
+ FUNCTION(tgu_ch2),
+ FUNCTION(tgu_ch3),
+ FUNCTION(tsense_pwm1),
+ FUNCTION(tsense_pwm2),
+ FUNCTION(tsif0_clk),
+ FUNCTION(tsif0_data),
+ FUNCTION(tsif0_en),
+ FUNCTION(tsif0_error),
+ FUNCTION(tsif0_sync),
+ FUNCTION(tsif1_clk),
+ FUNCTION(tsif1_data),
+ FUNCTION(tsif1_en),
+ FUNCTION(tsif1_error),
+ FUNCTION(tsif1_sync),
+ FUNCTION(usb2phy_ac),
+ FUNCTION(usb_phy),
+ FUNCTION(vsense_trigger),
+};
+
+/* Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup sm8250_groups[] = {
+ [0] = PINGROUP(0, SOUTH, qup19, qdss_cti, _, _, _, _, _, _, _),
+ [1] = PINGROUP(1, SOUTH, qup19, _, _, _, _, _, _, _, _),
+ [2] = PINGROUP(2, SOUTH, qup19, qdss_cti, qdss_cti, _, _, _, _, _, _),
+ [3] = PINGROUP(3, SOUTH, qup19, _, _, _, _, _, _, _, _),
+ [4] = PINGROUP(4, NORTH, qup1, ibi_i3c, _, _, _, _, _, _, _),
+ [5] = PINGROUP(5, NORTH, qup1, ibi_i3c, _, _, _, _, _, _, _),
+ [6] = PINGROUP(6, NORTH, qup1, qup_l4, _, _, _, _, _, _, _),
+ [7] = PINGROUP(7, NORTH, qup1, qup_l5, _, _, _, _, _, _, _),
+ [8] = PINGROUP(8, NORTH, qup4, _, _, _, _, _, _, _, _),
+ [9] = PINGROUP(9, NORTH, qup4, _, _, _, _, _, _, _, _),
+ [10] = PINGROUP(10, NORTH, qup4, _, _, _, _, _, _, _, _),
+ [11] = PINGROUP(11, NORTH, qup4, _, _, _, _, _, _, _, _),
+ [12] = PINGROUP(12, NORTH, qup5, _, _, _, _, _, _, _, _),
+ [13] = PINGROUP(13, NORTH, qup5, _, _, _, _, _, _, _, _),
+ [14] = PINGROUP(14, NORTH, qup5, qup_l4, _, _, _, _, _, _, _),
+ [15] = PINGROUP(15, NORTH, qup5, qup_l5, _, _, _, _, _, _, _),
+ [16] = PINGROUP(16, NORTH, qup6, _, _, _, _, _, _, _, _),
+ [17] = PINGROUP(17, NORTH, qup6, _, _, _, _, _, _, _, _),
+ [18] = PINGROUP(18, NORTH, qup6, _, _, _, _, _, _, _, _),
+ [19] = PINGROUP(19, NORTH, qup6, _, _, _, _, _, _, _, _),
+ [20] = PINGROUP(20, NORTH, qup7, _, _, _, _, _, _, _, _),
+ [21] = PINGROUP(21, NORTH, qup7, _, _, _, _, _, _, _, _),
+ [22] = PINGROUP(22, NORTH, qup7, _, _, _, _, _, _, _, _),
+ [23] = PINGROUP(23, NORTH, qup7, _, _, _, _, _, _, _, _),
+ [24] = PINGROUP(24, SOUTH, qup8, ibi_i3c, atest, _, _, _, _, _, _),
+ [25] = PINGROUP(25, SOUTH, qup8, ibi_i3c, atest, _, _, _, _, _, _),
+ [26] = PINGROUP(26, SOUTH, qup8, atest, _, _, _, _, _, _, _),
+ [27] = PINGROUP(27, SOUTH, qup8, atest, _, _, _, _, _, _, _),
+ [28] = PINGROUP(28, NORTH, qup0, ibi_i3c, _, _, _, _, _, _, _),
+ [29] = PINGROUP(29, NORTH, qup0, ibi_i3c, _, _, _, _, _, _, _),
+ [30] = PINGROUP(30, NORTH, qup0, _, _, _, _, _, _, _, _),
+ [31] = PINGROUP(31, NORTH, qup0, _, _, _, _, _, _, _, _),
+ [32] = PINGROUP(32, SOUTH, qup12, _, atest, _, _, _, _, _, _),
+ [33] = PINGROUP(33, SOUTH, qup12, atest, _, _, _, _, _, _, _),
+ [34] = PINGROUP(34, SOUTH, qup12, atest, _, _, _, _, _, _, _),
+ [35] = PINGROUP(35, SOUTH, qup12, atest, _, _, _, _, _, _, _),
+ [36] = PINGROUP(36, SOUTH, qup13, atest, _, _, _, _, _, _, _),
+ [37] = PINGROUP(37, SOUTH, qup13, atest, _, _, _, _, _, _, _),
+ [38] = PINGROUP(38, SOUTH, qup13, _, _, _, _, _, _, _, _),
+ [39] = PINGROUP(39, SOUTH, qup13, _, _, _, _, _, _, _, _),
+ [40] = PINGROUP(40, SOUTH, qup14, ibi_i3c, _, ddr_pxi3, _, _, _, _, _),
+ [41] = PINGROUP(41, SOUTH, qup14, ibi_i3c, _, ddr_pxi1, _, _, _, _, _),
+ [42] = PINGROUP(42, SOUTH, qup14, vsense_trigger, ddr_pxi1, _, _, _, _, _, _),
+ [43] = PINGROUP(43, SOUTH, qup14, ddr_pxi3, _, _, _, _, _, _, _),
+ [44] = PINGROUP(44, SOUTH, qup15, qdss_cti, dbg_out, _, _, _, _, _, _),
+ [45] = PINGROUP(45, SOUTH, qup15, qdss_cti, phase_flag, _, _, _, _, _, _),
+ [46] = PINGROUP(46, SOUTH, qup15, qup_l4, qdss_cti, phase_flag, _, _, _, _, _),
+ [47] = PINGROUP(47, SOUTH, qup15, qup_l5, phase_flag, _, _, _, _, _, _),
+ [48] = PINGROUP(48, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+ [49] = PINGROUP(49, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+ [50] = PINGROUP(50, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+ [51] = PINGROUP(51, SOUTH, qup16, phase_flag, _, _, _, _, _, _, _),
+ [52] = PINGROUP(52, SOUTH, qup17, ddr_pxi0, _, _, _, _, _, _, _),
+ [53] = PINGROUP(53, SOUTH, qup17, ddr_pxi0, _, _, _, _, _, _, _),
+ [54] = PINGROUP(54, SOUTH, qup17, jitter_bist, _, _, _, _, _, _, _),
+ [55] = PINGROUP(55, SOUTH, qup17, pll_bist, ddr_pxi2, _, _, _, _, _, _),
+ [56] = PINGROUP(56, SOUTH, qup18, ddr_pxi2, _, _, _, _, _, _, _),
+ [57] = PINGROUP(57, SOUTH, qup18, _, _, _, _, _, _, _, _),
+ [58] = PINGROUP(58, SOUTH, qup18, _, _, _, _, _, _, _, _),
+ [59] = PINGROUP(59, SOUTH, qup18, _, _, _, _, _, _, _, _),
+ [60] = PINGROUP(60, SOUTH, qup11, _, _, _, _, _, _, _, _),
+ [61] = PINGROUP(61, SOUTH, qup11, _, _, _, _, _, _, _, _),
+ [62] = PINGROUP(62, SOUTH, qup11, _, _, _, _, _, _, _, _),
+ [63] = PINGROUP(63, SOUTH, qup11, _, _, _, _, _, _, _, _),
+ [64] = PINGROUP(64, SOUTH, usb2phy_ac, qup_l6, _, _, _, _, _, _, _),
+ [65] = PINGROUP(65, SOUTH, usb_phy, pll_clk, _, _, _, _, _, _, _),
+ [66] = PINGROUP(66, NORTH, mdp_vsync, _, _, _, _, _, _, _, _),
+ [67] = PINGROUP(67, NORTH, mdp_vsync, dp_lcd, _, _, _, _, _, _, _),
+ [68] = PINGROUP(68, NORTH, mdp_vsync, dp_hot, _, _, _, _, _, _, _),
+ [69] = PINGROUP(69, SOUTH, qspi_cs, tsif0_clk, phase_flag, _, _, _, _, _, _),
+ [70] = PINGROUP(70, SOUTH, qspi0, tsif0_en, mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, phase_flag, _, _),
+ [71] = PINGROUP(71, SOUTH, qspi1, tsif0_data, sdc4_cmd, phase_flag, _, _, _, _, _),
+ [72] = PINGROUP(72, SOUTH, qspi2, tsif0_sync, sdc43, phase_flag, _, _, _, _, _),
+ [73] = PINGROUP(73, SOUTH, qspi_clk, tsif1_clk, sdc4_clk, phase_flag, _, _, _, _, _),
+ [74] = PINGROUP(74, SOUTH, qspi3, tsif1_en, sdc42, phase_flag, _, _, _, _, _),
+ [75] = PINGROUP(75, SOUTH, qspi_cs, tsif1_data, sdc41, _, _, _, _, _, _),
+ [76] = PINGROUP(76, SOUTH, tsif1_sync, sdc40, _, _, _, _, _, _, _),
+ [77] = PINGROUP(77, NORTH, qup_l6, aoss_cti, phase_flag, _, _, _, _, _, _),
+ [78] = PINGROUP(78, NORTH, sd_write, phase_flag, _, _, _, _, _, _, _),
+ [79] = PINGROUP(79, NORTH, pci_e0, phase_flag, _, _, _, _, _, _, _),
+ [80] = PINGROUP(80, NORTH, pci_e0, phase_flag, _, _, _, _, _, _, _),
+ [81] = PINGROUP(81, NORTH, phase_flag, _, _, _, _, _, _, _, _),
+ [82] = PINGROUP(82, NORTH, pci_e1, phase_flag, _, _, _, _, _, _, _),
+ [83] = PINGROUP(83, NORTH, pci_e1, phase_flag, _, _, _, _, _, _, _),
+ [84] = PINGROUP(84, NORTH, phase_flag, _, _, _, _, _, _, _, _),
+ [85] = PINGROUP(85, SOUTH, pci_e2, tgu_ch0, atest, _, _, _, _, _, _),
+ [86] = PINGROUP(86, SOUTH, pci_e2, tgu_ch3, atest, _, _, _, _, _, _),
+ [87] = PINGROUP(87, SOUTH, atest, _, _, _, _, _, _, _, _),
+ [88] = PINGROUP(88, SOUTH, _, atest, _, _, _, _, _, _, _),
+ [89] = PINGROUP(89, SOUTH, _, atest, _, _, _, _, _, _, _),
+ [90] = PINGROUP(90, SOUTH, tsif1_error, usb2phy_ac, tgu_ch1, _, _, _, _, _, _),
+ [91] = PINGROUP(91, SOUTH, tsif0_error, tgu_ch2, _, _, _, _, _, _, _),
+ [92] = PINGROUP(92, NORTH, qup_l6, qdss_cti, _, _, _, _, _, _, _),
+ [93] = PINGROUP(93, NORTH, qup_l6, qdss_cti, _, _, _, _, _, _, _),
+ [94] = PINGROUP(94, NORTH, cam_mclk, ddr_bist, qdss_gpio, _, _, _, _, _, _),
+ [95] = PINGROUP(95, NORTH, cam_mclk, ddr_bist, qdss_gpio, _, _, _, _, _, _),
+ [96] = PINGROUP(96, NORTH, cam_mclk, pll_bypassnl, qdss_gpio, _, _, _, _, _, _),
+ [97] = PINGROUP(97, NORTH, cam_mclk, pll_reset, qdss_gpio, _, _, _, _, _, _),
+ [98] = PINGROUP(98, NORTH, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+ [99] = PINGROUP(99, NORTH, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+ [100] = PINGROUP(100, NORTH, cam_mclk, qdss_gpio, _, _, _, _, _, _, _),
+ [101] = PINGROUP(101, NORTH, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+ [102] = PINGROUP(102, NORTH, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+ [103] = PINGROUP(103, NORTH, cci_i2c, phase_flag, _, qdss_gpio, _, _, _, _, _),
+ [104] = PINGROUP(104, NORTH, cci_i2c, phase_flag, _, qdss_gpio, _, _, _, _, _),
+ [105] = PINGROUP(105, NORTH, cci_i2c, qdss_gpio, _, _, _, _, _, _, _),
+ [106] = PINGROUP(106, NORTH, cci_i2c, gcc_gp1, qdss_gpio, _, _, _, _, _, _),
+ [107] = PINGROUP(107, NORTH, cci_i2c, gcc_gp2, qdss_gpio, _, _, _, _, _, _),
+ [108] = PINGROUP(108, NORTH, cci_i2c, gcc_gp3, qdss_gpio, _, _, _, _, _, _),
+ [109] = PINGROUP(109, NORTH, cci_timer0, qdss_gpio, _, _, _, _, _, _, _),
+ [110] = PINGROUP(110, NORTH, cci_timer1, qdss_gpio, _, _, _, _, _, _, _),
+ [111] = PINGROUP(111, NORTH, cci_timer2, qdss_gpio, _, _, _, _, _, _, _),
+ [112] = PINGROUP(112, NORTH, cci_timer3, cci_async, _, _, _, _, _, _, _),
+ [113] = PINGROUP(113, NORTH, cci_timer4, cci_async, _, _, _, _, _, _, _),
+ [114] = PINGROUP(114, NORTH, cci_async, _, _, _, _, _, _, _, _),
+ [115] = PINGROUP(115, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+ [116] = PINGROUP(116, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+ [117] = PINGROUP(117, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+ [118] = PINGROUP(118, NORTH, qup2, phase_flag, _, _, _, _, _, _, _),
+ [119] = PINGROUP(119, NORTH, qup3, phase_flag, _, _, _, _, _, _, _),
+ [120] = PINGROUP(120, NORTH, qup3, phase_flag, _, _, _, _, _, _, _),
+ [121] = PINGROUP(121, NORTH, qup3, _, _, _, _, _, _, _, _),
+ [122] = PINGROUP(122, NORTH, qup3, mdp_vsync, phase_flag, _, _, _, _, _, _),
+ [123] = PINGROUP(123, NORTH, qup_l4, tsense_pwm1, tsense_pwm2, _, _, _, _, _, _),
+ [124] = PINGROUP(124, NORTH, qup_l5, mdp_vsync, phase_flag, _, _, _, _, _, _),
+ [125] = PINGROUP(125, SOUTH, qup9, phase_flag, _, _, _, _, _, _, _),
+ [126] = PINGROUP(126, SOUTH, qup9, _, _, _, _, _, _, _, _),
+ [127] = PINGROUP(127, SOUTH, qup9, _, _, _, _, _, _, _, _),
+ [128] = PINGROUP(128, SOUTH, qup9, _, _, _, _, _, _, _, _),
+ [129] = PINGROUP(129, SOUTH, qup10, _, _, _, _, _, _, _, _),
+ [130] = PINGROUP(130, SOUTH, qup10, _, _, _, _, _, _, _, _),
+ [131] = PINGROUP(131, SOUTH, qup10, _, _, _, _, _, _, _, _),
+ [132] = PINGROUP(132, SOUTH, qup10, _, _, _, _, _, _, _, _),
+ [133] = PINGROUP(133, WEST, mi2s2_sck, _, _, _, _, _, _, _, _),
+ [134] = PINGROUP(134, WEST, mi2s2_data0, _, _, _, _, _, _, _, _),
+ [135] = PINGROUP(135, WEST, mi2s2_ws, _, _, _, _, _, _, _, _),
+ [136] = PINGROUP(136, WEST, pri_mi2s, gcc_gp1, _, _, _, _, _, _, _),
+ [137] = PINGROUP(137, WEST, sec_mi2s, audio_ref, mi2s2_data1, gcc_gp2, _, _, _, _, _),
+ [138] = PINGROUP(138, WEST, mi2s0_sck, gcc_gp3, _, _, _, _, _, _, _),
+ [139] = PINGROUP(139, WEST, mi2s0_data0, _, _, _, _, _, _, _, _),
+ [140] = PINGROUP(140, WEST, mi2s0_data1, _, _, _, _, _, _, _, _),
+ [141] = PINGROUP(141, WEST, mi2s0_ws, _, _, _, _, _, _, _, _),
+ [142] = PINGROUP(142, WEST, lpass_slimbus, mi2s1_sck, _, _, _, _, _, _, _),
+ [143] = PINGROUP(143, WEST, lpass_slimbus, mi2s1_data0, ddr_bist, _, _, _, _, _, _),
+ [144] = PINGROUP(144, WEST, lpass_slimbus, mi2s1_data1, ddr_bist, _, _, _, _, _, _),
+ [145] = PINGROUP(145, WEST, lpass_slimbus, mi2s1_ws, _, _, _, _, _, _, _),
+ [146] = PINGROUP(146, WEST, _, _, _, _, _, _, _, _, _),
+ [147] = PINGROUP(147, WEST, _, _, _, _, _, _, _, _, _),
+ [148] = PINGROUP(148, WEST, _, _, _, _, _, _, _, _, _),
+ [149] = PINGROUP(149, WEST, _, _, _, _, _, _, _, _, _),
+ [150] = PINGROUP(150, WEST, _, _, _, _, _, _, _, _, _),
+ [151] = PINGROUP(151, WEST, _, _, _, _, _, _, _, _, _),
+ [152] = PINGROUP(152, WEST, _, _, _, _, _, _, _, _, _),
+ [153] = PINGROUP(153, WEST, _, _, _, _, _, _, _, _, _),
+ [154] = PINGROUP(154, WEST, _, _, _, _, _, _, _, _, _),
+ [155] = PINGROUP(155, WEST, _, _, _, _, _, _, _, _, _),
+ [156] = PINGROUP(156, WEST, _, _, _, _, _, _, _, _, _),
+ [157] = PINGROUP(157, WEST, _, _, _, _, _, _, _, _, _),
+ [158] = PINGROUP(158, WEST, _, _, _, _, _, _, _, _, _),
+ [159] = PINGROUP(159, WEST, cri_trng0, _, _, _, _, _, _, _, _),
+ [160] = PINGROUP(160, WEST, cri_trng1, qdss_gpio, _, _, _, _, _, _, _),
+ [161] = PINGROUP(161, WEST, cri_trng, qdss_gpio, _, _, _, _, _, _, _),
+ [162] = PINGROUP(162, WEST, sp_cmu, qdss_gpio, _, _, _, _, _, _, _),
+ [163] = PINGROUP(163, WEST, prng_rosc, qdss_gpio, _, _, _, _, _, _, _),
+ [164] = PINGROUP(164, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [165] = PINGROUP(165, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [166] = PINGROUP(166, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [167] = PINGROUP(167, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [168] = PINGROUP(168, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [169] = PINGROUP(169, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [170] = PINGROUP(170, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [171] = PINGROUP(171, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [172] = PINGROUP(172, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [173] = PINGROUP(173, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [174] = PINGROUP(174, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [175] = PINGROUP(175, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [176] = PINGROUP(176, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [177] = PINGROUP(177, WEST, qdss_gpio, _, _, _, _, _, _, _, _),
+ [178] = PINGROUP(178, WEST, _, _, _, _, _, _, _, _, _),
+ [179] = PINGROUP(179, WEST, _, _, _, _, _, _, _, _, _),
+ [180] = UFS_RESET(ufs_reset, 0xb8000),
+ [181] = SDC_PINGROUP(sdc2_clk, 0x7000, 14, 6),
+ [182] = SDC_PINGROUP(sdc2_cmd, 0xb7000, 11, 3),
+ [183] = SDC_PINGROUP(sdc2_data, 0xb7000, 9, 0),
+};
+
+static const struct msm_pinctrl_soc_data sm8250_pinctrl = {
+ .pins = sm8250_pins,
+ .npins = ARRAY_SIZE(sm8250_pins),
+ .functions = sm8250_functions,
+ .nfunctions = ARRAY_SIZE(sm8250_functions),
+ .groups = sm8250_groups,
+ .ngroups = ARRAY_SIZE(sm8250_groups),
+ .ngpios = 181,
+ .tiles = sm8250_tiles,
+ .ntiles = ARRAY_SIZE(sm8250_tiles),
+};
+
+static int sm8250_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &sm8250_pinctrl);
+}
+
+static const struct of_device_id sm8250_pinctrl_of_match[] = {
+ { .compatible = "qcom,sm8250-pinctrl", },
+ { },
+};
+
+static struct platform_driver sm8250_pinctrl_driver = {
+ .driver = {
+ .name = "sm8250-pinctrl",
+ .of_match_table = sm8250_pinctrl_of_match,
+ },
+ .probe = sm8250_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init sm8250_pinctrl_init(void)
+{
+ return platform_driver_register(&sm8250_pinctrl_driver);
+}
+arch_initcall(sm8250_pinctrl_init);
+
+static void __exit sm8250_pinctrl_exit(void)
+{
+ platform_driver_unregister(&sm8250_pinctrl_driver);
+}
+module_exit(sm8250_pinctrl_exit);
+
+MODULE_DESCRIPTION("QTI sm8250 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, sm8250_pinctrl_of_match);
--
2.24.0
Add device tree binding Documentation details for Qualcomm SM8250
pinctrl driver.
Signed-off-by: Bjorn Andersson <[email protected]>
---
.../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 147 ++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
new file mode 100644
index 000000000000..6dc3b52f47cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8250 TLMM block
+
+maintainers:
+ - Bjorn Andersson <[email protected]>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ SM8250 platform.
+
+properties:
+ compatible:
+ const: qcom,sm8250-pinctrl
+
+ reg:
+ minItems: 3
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: "west"
+ - const: "south"
+ - const: "north"
+
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ wakeup-parent:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+ ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+ mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+ pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+ pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+ qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+ qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+ sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+ tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+ tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@1f00000 {
+ compatible = "qcom,sm8250-pinctrl";
+ reg = <0x0f100000 0x300000>,
+ <0x0f500000 0x300000>,
+ <0x0f900000 0x300000>;
+ reg-names = "west", "south", "north";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 180>;
+ wakeup-parent = <&pdc>;
+ };
--
2.24.0
On Fri, Apr 17, 2020 at 8:19 AM Bjorn Andersson
<[email protected]> wrote:
> Binding and driver for the Qualcomm SM8250 TLMM pinctrl block
Applied both patches. Thanks!
As noted elsewhere Qualcomm is full circle now recycling the
number of their first Snapdragon QSD8250 SoC from 2007
for a new SM8250 SoC only 13 years later :D
Yours,
Linus Walleij
On Thu, Apr 16, 2020 at 11:19:06PM -0700, Bjorn Andersson wrote:
> Add device tree binding Documentation details for Qualcomm SM8250
> pinctrl driver.
>
> Signed-off-by: Bjorn Andersson <[email protected]>
> ---
> .../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 147 ++++++++++++++++++
> 1 file changed, 147 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> new file mode 100644
> index 000000000000..6dc3b52f47cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> @@ -0,0 +1,147 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. SM8250 TLMM block
> +
> +maintainers:
> + - Bjorn Andersson <[email protected]>
> +
> +description: |
> + This binding describes the Top Level Mode Multiplexer block found in the
> + SM8250 platform.
> +
> +properties:
> + compatible:
> + const: qcom,sm8250-pinctrl
> +
> + reg:
> + minItems: 3
> + maxItems: 3
> +
> + reg-names:
> + items:
> + - const: "west"
> + - const: "south"
> + - const: "north"
> +
> + interrupts:
> + description: Specifies the TLMM summary IRQ
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + description:
> + Specifies the PIN numbers and Flags, as defined in defined in
> + include/dt-bindings/interrupt-controller/irq.h
> + const: 2
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + description: Specifying the pin number and flags, as defined in
> + include/dt-bindings/gpio/gpio.h
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + wakeup-parent:
> + maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> + '^.*$':
> + if:
> + type: object
> + then:
Needs a $ref to the standard properties.
Would be good to show a child node in the example too. (And try having
an error in a standard property type to verify you get an error).
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + oneOf:
> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
> + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> +
> + enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
> + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
> + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
> + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
> + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
> + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
> + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
> + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
> + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
> + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
> + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
> + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
> + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
> + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
> + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
> + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
> + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
> +
> + drive-strength:
> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
> + default: 2
> + description:
> + Selects the drive strength for the specified pins, in mA.
> +
> + bias-pull-down: true
> +
> + bias-pull-up: true
> +
> + bias-disable: true
> +
> + output-high: true
> +
> + output-low: true
> +
> + required:
> + - pins
> + - function
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - interrupts
> + - interrupt-controller
> + - '#interrupt-cells'
> + - gpio-controller
> + - '#gpio-cells'
> + - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + pinctrl@1f00000 {
> + compatible = "qcom,sm8250-pinctrl";
> + reg = <0x0f100000 0x300000>,
> + <0x0f500000 0x300000>,
> + <0x0f900000 0x300000>;
> + reg-names = "west", "south", "north";
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 180>;
> + wakeup-parent = <&pdc>;
> + };
> --
> 2.24.0
>
On Wed 29 Apr 14:34 PDT 2020, Rob Herring wrote:
> On Thu, Apr 16, 2020 at 11:19:06PM -0700, Bjorn Andersson wrote:
> > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
[..]
> > +#PIN CONFIGURATION NODES
> > +patternProperties:
> > + '^.*$':
> > + if:
> > + type: object
> > + then:
>
> Needs a $ref to the standard properties.
>
> Would be good to show a child node in the example too. (And try having
> an error in a standard property type to verify you get an error).
>
Finally looked into this. By $ref'ing pinmux-node.yaml I can drop pins
and function from below properties, and by $ref'ing pincfg-node.yaml I
can drop the pinconf entries listed.
But how do I $ref both?
What's the appropriate method for amending pins, function and
drive-strength with the more specific value set? Should I both $ref them
and list them here?
How do I limit which standard properties are actually supported in this
binding?
Thanks,
Bjorn
> > + properties:
> > + pins:
> > + description:
> > + List of gpio pins affected by the properties specified in this
> > + subnode.
> > + items:
> > + oneOf:
> > + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
> > + - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
> > + minItems: 1
> > + maxItems: 36
> > +
> > + function:
> > + description:
> > + Specify the alternative function to be configured for the specified
> > + pins.
> > +
> > + enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
> > + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
> > + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
> > + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
> > + ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
> > + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
> > + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
> > + mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
> > + pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
> > + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
> > + qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
> > + qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
> > + qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
> > + sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
> > + tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
> > + tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
> > + tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
> > +
> > + drive-strength:
> > + enum: [2, 4, 6, 8, 10, 12, 14, 16]
> > + default: 2
> > + description:
> > + Selects the drive strength for the specified pins, in mA.
> > +
> > + bias-pull-down: true
> > +
> > + bias-pull-up: true
> > +
> > + bias-disable: true
> > +
> > + output-high: true
> > +
> > + output-low: true
> > +
> > + required:
> > + - pins
> > + - function
> > +
> > + additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - reg-names
> > + - interrupts
> > + - interrupt-controller
> > + - '#interrupt-cells'
> > + - gpio-controller
> > + - '#gpio-cells'
> > + - gpio-ranges
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + pinctrl@1f00000 {
> > + compatible = "qcom,sm8250-pinctrl";
> > + reg = <0x0f100000 0x300000>,
> > + <0x0f500000 0x300000>,
> > + <0x0f900000 0x300000>;
> > + reg-names = "west", "south", "north";
> > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + gpio-ranges = <&tlmm 0 0 180>;
> > + wakeup-parent = <&pdc>;
> > + };
> > --
> > 2.24.0
> >
On Thu, May 14, 2020 at 8:04 AM Bjorn Andersson
<[email protected]> wrote:
> On Wed 29 Apr 14:34 PDT 2020, Rob Herring wrote:
> > On Thu, Apr 16, 2020 at 11:19:06PM -0700, Bjorn Andersson wrote:
> > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> [..]
> > > +#PIN CONFIGURATION NODES
> > > +patternProperties:
> > > + '^.*$':
> > > + if:
> > > + type: object
> > > + then:
> >
> > Needs a $ref to the standard properties.
> >
> > Would be good to show a child node in the example too. (And try having
> > an error in a standard property type to verify you get an error).
> >
>
> Finally looked into this.
Can you send an incremental patch because otherwise I have
to revert the patch that I merged (maybe to trigger happy, mea culpa).
(If it's too hard I can just revert it.)
Yours,
Linus Walleij
On Thu 14 May 07:12 PDT 2020, Linus Walleij wrote:
> On Thu, May 14, 2020 at 8:04 AM Bjorn Andersson
> <[email protected]> wrote:
> > On Wed 29 Apr 14:34 PDT 2020, Rob Herring wrote:
> > > On Thu, Apr 16, 2020 at 11:19:06PM -0700, Bjorn Andersson wrote:
> > > > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
> > [..]
> > > > +#PIN CONFIGURATION NODES
> > > > +patternProperties:
> > > > + '^.*$':
> > > > + if:
> > > > + type: object
> > > > + then:
> > >
> > > Needs a $ref to the standard properties.
> > >
> > > Would be good to show a child node in the example too. (And try having
> > > an error in a standard property type to verify you get an error).
> > >
> >
> > Finally looked into this.
>
> Can you send an incremental patch because otherwise I have
> to revert the patch that I merged (maybe to trigger happy, mea culpa).
>
I appreciate that you merged this already, so I'm happy to fix this
incrementally.
> (If it's too hard I can just revert it.)
>
Afaict there are two different $refs available with standard properties
and adding either one works, but I don't understand how to add both.
Also $ref'ing pincfg-node.yaml means that the binding suddenly accepts
standard properties that the hardware doesn't support, so I would like
to be able to reduce this list somehow...
But I don't see anything preventing this from being done incrementally.
Thanks,
Bjorn