The sentence is not proper English due to a minor typo of "addess". The 'r'
letter is missing which this change is now amending. This was caught while
reading the driver source for getting more information about it, and then I ran
the vim spellchecker to make sure there are no more typos in this file.
Signed-off-by: Laszlo Papp <[email protected]>
---
drivers/mfd/stw481x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mfd/stw481x.c b/drivers/mfd/stw481x.c
index 1243d5c..24b8a12 100644
--- a/drivers/mfd/stw481x.c
+++ b/drivers/mfd/stw481x.c
@@ -36,7 +36,7 @@
* @reg: power control register to fetch
*
* The power control registers is a set of one-time-programmable registers
- * in its own register space, accessed by writing addess bits to these
+ * in its own register space, accessed by writing address bits to these
* two registers: bits 7,6,5 of PCTL_REG_LO corresponds to the 3 LSBs of
* the address and bits 8,9 of PCTL_REG_HI corresponds to the 2 MSBs of
* the address, forming an address space of 5 bits, i.e. 32 registers
--
1.8.5.1
On Wed, Jan 8, 2014 at 6:34 PM, Laszlo Papp <[email protected]> wrote:
> The sentence is not proper English due to a minor typo of "addess". The 'r'
> letter is missing which this change is now amending. This was caught while
> reading the driver source for getting more information about it, and then I ran
> the vim spellchecker to make sure there are no more typos in this file.
>
> Signed-off-by: Laszlo Papp <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij
> The sentence is not proper English due to a minor typo of "addess". The 'r'
> letter is missing which this change is now amending. This was caught while
> reading the driver source for getting more information about it, and then I ran
> the vim spellchecker to make sure there are no more typos in this file.
>
> Signed-off-by: Laszlo Papp <[email protected]>
> ---
> drivers/mfd/stw481x.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
I'm feeling genorous today, so I'll apply it and change the subject
line for you. This is the second time I've told you to do,
`git log --oneline -- <subsystem>`
in order to find the correct commit log format for the subsystem
you're applying patches to. Next time I'll just NACK the patch and
you'll have to fix it yourself.
Patch applied.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog