2021-09-22 02:58:23

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v13 0/5] Mediatek pinctrl patch on mt8195

This series includes 5 patches:
1.add rsel define.
2.change pull up/down description
3.fix coding style
4.support rsel feature for common ICs
5.add rsel setting on MT8195

Changes in patch v13:
1)change "-EOPNOTSUPP" to "-ENOTSUPP" in patch 4/5.
2)fix description on 2/5.

Changes in patch v12:
1)add "ack-by" on "rsel define" patch.
2)add "change reason" in commit message and write a shema
on patch document patch 2/5.
3)separate eint pm_ops fucntion support patch
4)separate rsel patch, the common parts as patch 4/5 to support
common ICs. The mt8195 specific changes as patch 5/5.
5)add fix coding style patch to fix Camel spelling to avoid checkpatch
warning in a following patch.
6)remove unrelated changes in rsel patch.
7)change ternary ops in resel patch
8)add "rsel_is_unit" property on struct mtk_pinctrl, and itendify
"mediatek,rsel_resistance_in_si_unit" property in probe function.
9)add explanation for "MTK_PULL_RSEL_TYPE" and "MTK_PULL_PU_PD_RSEL_TYPE".
10) fix spell warning in rsel patch.

Changes in patch v11:
1)add pm_ops fucntion support
2)change pull up/down description
3)add resistance value feature support.

Changes in patch v10:
1)fix PARENTHESIS_ALIGNMENT of mtk_pinconf_bias_set_rsel
2)fix LONG_LINE warning in 615 in pinctrl-paris.c.

Changes in patch v9:
1)fix "mtk_pinconf_bias_set_rsel" build warning.

Changes in patch v8:
1)add rsel define patch
2)avoid CamelCase
3)add pinctrl rsel setting patch which is another resistance selection
solution for I2C on MT8195.

Changes in patch v7:
1)add version in patch and fix spelling mistakes.

Changes in patch v6:
1)add "pintcrl: mediatek" as prefix.

Changes in patch v5:
1)document and driver patch are apploed.
2)change '-EOPNOTSUPP' to '-ENOTSUPP'

Changes in patch v4:
1)fix pinctrl-mt8195.yaml warning error.
2)remove pinctrl device node patch which is based on "mt8195.dtsi".

Changes in patch v3:
1)change '^pins' to '-pins$'.
2)change 'state_0_node_a' to 'gpio_pin' which is defined in dts.
3)change 'state_0_node_b' to 'i2c0_pin' which is defined in dts.
4)reorder this series patches. change pinctrl file and binding document
together in one patch.

There are no changes in v1 & v2.

Zhiyong Tao (5):
dt-bindings: pinctrl: mt8195: add rsel define
dt-bindings: pinctrl: mt8195: change pull up/down description
pinctrl: mediatek: fix coding style
pinctrl: mediatek: support rsel feature
pinctrl: mediatek: add rsel setting on MT8195

.../bindings/pinctrl/pinctrl-mt8195.yaml | 65 ++++-
drivers/pinctrl/mediatek/pinctrl-mt8195.c | 133 ++++++++++
.../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 231 +++++++++++++++---
.../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 45 ++++
drivers/pinctrl/mediatek/pinctrl-paris.c | 68 ++++--
include/dt-bindings/pinctrl/mt65xx.h | 9 +
6 files changed, 497 insertions(+), 54 deletions(-)

--
2.18.0



2021-09-22 02:58:51

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v13 3/5] pinctrl: mediatek: fix coding style

Fix Camel spelling coding style to avoid checkpatch
warning in a following patch.

Signed-off-by: Zhiyong Tao <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 85db2e4377f0..38aec0177d15 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -577,7 +577,7 @@ static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int
mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DRV)

ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
- unsigned int gpio, char *buf, unsigned int bufLen)
+ unsigned int gpio, char *buf, unsigned int buf_len)
{
int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1;
const struct mtk_pin_desc *desc;
@@ -610,7 +610,7 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
} else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
pullen = 0;
}
- len += scnprintf(buf + len, bufLen - len,
+ len += scnprintf(buf + len, buf_len - len,
"%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
gpio,
pinmux,
@@ -624,10 +624,10 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
pullup);

if (r1 != -1) {
- len += scnprintf(buf + len, bufLen - len, " (%1d %1d)\n",
+ len += scnprintf(buf + len, buf_len - len, " (%1d %1d)\n",
r1, r0);
} else {
- len += scnprintf(buf + len, bufLen - len, "\n");
+ len += scnprintf(buf + len, buf_len - len, "\n");
}

return len;
--
2.25.1

2021-09-22 02:59:08

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v13 4/5] pinctrl: mediatek: support rsel feature

This patch supports rsel(resistance selection) feature for I2C pins.
It provides more resistance selection solution in different ICs.
It provides rsel define and si unit solution by identifying
"mediatek,rsel_resistance_in_si_unit" property in pio dtsi node.

Signed-off-by: Zhiyong Tao <[email protected]>
---
.../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 231 +++++++++++++++---
.../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 45 ++++
drivers/pinctrl/mediatek/pinctrl-paris.c | 60 +++--
3 files changed, 288 insertions(+), 48 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 5b3b048725cc..e84001923aaf 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -661,6 +661,181 @@ static int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
return err;
}

+static int mtk_hw_pin_rsel_lookup(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg, u32 *rsel_val)
+{
+ const struct mtk_pin_rsel *rsel;
+ int check;
+ bool found = false;
+
+ rsel = hw->soc->pin_rsel;
+
+ for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
+ if (desc->number >= rsel[check].s_pin &&
+ desc->number <= rsel[check].e_pin) {
+ if (pullup) {
+ if (rsel[check].up_rsel == arg) {
+ found = true;
+ *rsel_val = rsel[check].rsel_index;
+ break;
+ }
+ } else {
+ if (rsel[check].down_rsel == arg) {
+ found = true;
+ *rsel_val = rsel[check].rsel_index;
+ break;
+ }
+ }
+ }
+ }
+
+ if (!found) {
+ dev_err(hw->dev, "Not support rsel value %d Ohm for pin = %d (%s)\n",
+ arg, desc->number, desc->name);
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int mtk_pinconf_bias_set_rsel(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ int err, rsel_val;
+
+ if (hw->rsel_si_unit) {
+ /* find pin rsel_index from pin_rsel array*/
+ err = mtk_hw_pin_rsel_lookup(hw, desc, pullup, arg, &rsel_val);
+ if (err)
+ goto out;
+ } else {
+ if (arg < MTK_PULL_SET_RSEL_000 ||
+ arg > MTK_PULL_SET_RSEL_111) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ rsel_val = arg - MTK_PULL_SET_RSEL_000;
+ }
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_RSEL, rsel_val);
+ if (err)
+ goto out;
+
+ err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, MTK_ENABLE);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ int err = -ENOTSUPP;
+ u32 try_all_type;
+
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+ else
+ try_all_type = MTK_PULL_TYPE_MASK;
+
+ if (try_all_type & MTK_PULL_RSEL_TYPE) {
+ err = mtk_pinconf_bias_set_rsel(hw, desc, pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PU_PD_TYPE) {
+ err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
+ err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc,
+ pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
+ err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
+
+ if (err)
+ dev_err(hw->dev, "Invalid pull argument\n");
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
+
+static int mtk_rsel_get_si_unit(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 rsel_val, u32 *si_unit)
+{
+ const struct mtk_pin_rsel *rsel;
+ int check;
+
+ rsel = hw->soc->pin_rsel;
+
+ for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
+ if (desc->number >= rsel[check].s_pin &&
+ desc->number <= rsel[check].e_pin) {
+ if (rsel_val == rsel[check].rsel_index) {
+ if (pullup)
+ *si_unit = rsel[check].up_rsel;
+ else
+ *si_unit = rsel[check].down_rsel;
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mtk_pinconf_bias_get_rsel(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable)
+{
+ int pu, pd, rsel, err;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_RSEL, &rsel);
+ if (err)
+ goto out;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu);
+ if (err)
+ goto out;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);
+
+ if (pu == 0 && pd == 0) {
+ *pullup = 0;
+ *enable = MTK_DISABLE;
+ } else if (pu == 1 && pd == 0) {
+ *pullup = 1;
+ if (hw->rsel_si_unit)
+ mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
+ else
+ *enable = rsel + MTK_PULL_SET_RSEL_000;
+ } else if (pu == 0 && pd == 1) {
+ *pullup = 0;
+ if (hw->rsel_si_unit)
+ mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
+ else
+ *enable = rsel + MTK_PULL_SET_RSEL_000;
+ } else {
+ err = -EINVAL;
+ goto out;
+ }
+
+out:
+ return err;
+}
+
static int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc,
u32 *pullup, u32 *enable)
@@ -742,44 +917,40 @@ static int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
return err;
}

-int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
- const struct mtk_pin_desc *desc,
- u32 pullup, u32 arg)
-{
- int err;
-
- err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
- if (!err)
- goto out;
-
- err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg);
- if (!err)
- goto out;
-
- err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
-
int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc,
u32 *pullup, u32 *enable)
{
- int err;
+ int err = -ENOTSUPP;
+ u32 try_all_type;

- err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
- if (!err)
- goto out;
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+ else
+ try_all_type = MTK_PULL_TYPE_MASK;

- err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable);
- if (!err)
- goto out;
+ if (try_all_type & MTK_PULL_RSEL_TYPE) {
+ err = mtk_pinconf_bias_get_rsel(hw, desc, pullup, enable);
+ if (!err)
+ return err;
+ }

- err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
+ if (try_all_type & MTK_PULL_PU_PD_TYPE) {
+ err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
+ err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc,
+ pullup, enable);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
+ err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);

-out:
return err;
}
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_combo);
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index a6f1bdb2083b..4908c7aedbe0 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -17,6 +17,22 @@
#define MTK_ENABLE 1
#define MTK_PULLDOWN 0
#define MTK_PULLUP 1
+#define MTK_PULL_PU_PD_TYPE BIT(0)
+#define MTK_PULL_PULLSEL_TYPE BIT(1)
+#define MTK_PULL_PUPD_R1R0_TYPE BIT(2)
+/* MTK_PULL_RSEL_TYPE can select resistance and can be
+ * turned on/off itself. But it can't be selected pull up/down
+ */
+#define MTK_PULL_RSEL_TYPE BIT(3)
+/* MTK_PULL_PU_PD_RSEL_TYPE is a type which is controlled by
+ * MTK_PULL_PU_PD_TYPE and MTK_PULL_RSEL_TYPE.
+ */
+#define MTK_PULL_PU_PD_RSEL_TYPE (MTK_PULL_PU_PD_TYPE \
+ | MTK_PULL_RSEL_TYPE)
+#define MTK_PULL_TYPE_MASK (MTK_PULL_PU_PD_TYPE |\
+ MTK_PULL_PULLSEL_TYPE |\
+ MTK_PULL_PUPD_R1R0_TYPE |\
+ MTK_PULL_RSEL_TYPE)

#define EINT_NA U16_MAX
#define NO_EINT_SUPPORT EINT_NA
@@ -42,6 +58,14 @@
PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
_x_bits, 32, 1)

+#define PIN_RSEL(_s_pin, _e_pin, _rsel_index, _up_resl, _down_rsel) { \
+ .s_pin = _s_pin, \
+ .e_pin = _e_pin, \
+ .rsel_index = _rsel_index, \
+ .up_rsel = _up_resl, \
+ .down_rsel = _down_rsel, \
+ }
+
/* List these attributes which could be modified for the pin */
enum {
PINCTRL_PIN_REG_MODE,
@@ -67,6 +91,7 @@ enum {
PINCTRL_PIN_REG_DRV_E0,
PINCTRL_PIN_REG_DRV_E1,
PINCTRL_PIN_REG_DRV_ADV,
+ PINCTRL_PIN_REG_RSEL,
PINCTRL_PIN_REG_MAX,
};

@@ -129,6 +154,21 @@ struct mtk_pin_field_calc {
u8 fixed;
};

+/* struct mtk_pin_rsel - the structure that provides bias resistance selection.
+ * @s_pin: the start pin within the rsel range
+ * @e_pin: the end pin within the rsel range
+ * @rsel_index: the rsel bias resistance index
+ * @up_rsel: the pullup rsel bias resistance value
+ * @down_rsel: the pulldown rsel bias resistance value
+ */
+struct mtk_pin_rsel {
+ u16 s_pin;
+ u16 e_pin;
+ u16 rsel_index;
+ u32 up_rsel;
+ u32 down_rsel;
+};
+
/* struct mtk_pin_reg_calc - the structure that holds all ranges used to
* determine which register the pin would make use of
* for certain pin attribute.
@@ -206,6 +246,9 @@ struct mtk_pin_soc {
bool ies_present;
const char * const *base_names;
unsigned int nbase_names;
+ const unsigned int *pull_type;
+ const struct mtk_pin_rsel *pin_rsel;
+ unsigned int npin_rsel;

/* Specific pinconfig operations */
int (*bias_disable_set)(struct mtk_pinctrl *hw,
@@ -254,6 +297,8 @@ struct mtk_pinctrl {
const char **grp_names;
/* lock pin's register resource to avoid multiple threads issue*/
spinlock_t lock;
+ /* identify rsel setting by si unit or rsel define in dts node */
+ bool rsel_si_unit;
};

void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set);
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 38aec0177d15..d4e02c5d74a8 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -579,8 +579,9 @@ static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int
ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
unsigned int gpio, char *buf, unsigned int buf_len)
{
- int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1;
+ int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1, rsel = -1;
const struct mtk_pin_desc *desc;
+ u32 try_all_type;

if (gpio >= hw->soc->npins)
return -EINVAL;
@@ -591,24 +592,39 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
pinmux -= hw->soc->nfuncs;

mtk_pinconf_bias_get_combo(hw, desc, &pullup, &pullen);
- if (pullen == MTK_PUPD_SET_R1R0_00) {
- pullen = 0;
- r1 = 0;
- r0 = 0;
- } else if (pullen == MTK_PUPD_SET_R1R0_01) {
- pullen = 1;
- r1 = 0;
- r0 = 1;
- } else if (pullen == MTK_PUPD_SET_R1R0_10) {
- pullen = 1;
- r1 = 1;
- r0 = 0;
- } else if (pullen == MTK_PUPD_SET_R1R0_11) {
+
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+
+ if (hw->rsel_si_unit && (try_all_type & MTK_PULL_RSEL_TYPE)) {
+ rsel = pullen;
pullen = 1;
- r1 = 1;
- r0 = 1;
- } else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
- pullen = 0;
+ } else {
+ /* Case for: R1R0 */
+ if (pullen == MTK_PUPD_SET_R1R0_00) {
+ pullen = 0;
+ r1 = 0;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_01) {
+ pullen = 1;
+ r1 = 0;
+ r0 = 1;
+ } else if (pullen == MTK_PUPD_SET_R1R0_10) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_11) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 1;
+ }
+
+ /* Case for: RSEL */
+ if (pullen >= MTK_PULL_SET_RSEL_000 &&
+ pullen <= MTK_PULL_SET_RSEL_111) {
+ rsel = pullen - MTK_PULL_SET_RSEL_000;
+ pullen = 1;
+ }
}
len += scnprintf(buf + len, buf_len - len,
"%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
@@ -626,6 +642,8 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
if (r1 != -1) {
len += scnprintf(buf + len, buf_len - len, " (%1d %1d)\n",
r1, r0);
+ } else if (rsel != -1) {
+ len += scnprintf(buf + len, buf_len - len, " (%1d)\n", rsel);
} else {
len += scnprintf(buf + len, buf_len - len, "\n");
}
@@ -970,6 +988,12 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,

hw->nbase = hw->soc->nbase_names;

+ if (of_find_property(hw->dev->of_node,
+ "mediatek,rsel_resistance_in_si_unit", NULL))
+ hw->rsel_si_unit = true;
+ else
+ hw->rsel_si_unit = false;
+
spin_lock_init(&hw->lock);

err = mtk_pctrl_build_state(pdev);
--
2.25.1

2021-09-22 03:11:06

by Chen-Yu Tsai

[permalink] [raw]
Subject: Re: [PATCH v13 3/5] pinctrl: mediatek: fix coding style

On Wed, Sep 22, 2021 at 10:58 AM Zhiyong Tao <[email protected]> wrote:
>
> Fix Camel spelling coding style to avoid checkpatch
> warning in a following patch.
>
> Signed-off-by: Zhiyong Tao <[email protected]>

Reviewed-by: Chen-Yu Tsai <[email protected]>

2021-09-23 07:38:24

by Chen-Yu Tsai

[permalink] [raw]
Subject: Re: [PATCH v13 4/5] pinctrl: mediatek: support rsel feature

Hi,

On Wed, Sep 22, 2021 at 10:59 AM Zhiyong Tao <[email protected]> wrote:
>
> This patch supports rsel(resistance selection) feature for I2C pins.
> It provides more resistance selection solution in different ICs.
> It provides rsel define and si unit solution by identifying
> "mediatek,rsel_resistance_in_si_unit" property in pio dtsi node.
>
> Signed-off-by: Zhiyong Tao <[email protected]>
> ---
> .../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 231 +++++++++++++++---
> .../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 45 ++++
> drivers/pinctrl/mediatek/pinctrl-paris.c | 60 +++--
> 3 files changed, 288 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index 5b3b048725cc..e84001923aaf 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -661,6 +661,181 @@ static int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
> return err;
> }
>
> +static int mtk_hw_pin_rsel_lookup(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 pullup, u32 arg, u32 *rsel_val)
> +{
> + const struct mtk_pin_rsel *rsel;
> + int check;
> + bool found = false;
> +
> + rsel = hw->soc->pin_rsel;
> +
> + for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
> + if (desc->number >= rsel[check].s_pin &&
> + desc->number <= rsel[check].e_pin) {
> + if (pullup) {
> + if (rsel[check].up_rsel == arg) {
> + found = true;
> + *rsel_val = rsel[check].rsel_index;
> + break;

The code could simply `return 0` after setting *rsel_val, then we don't have
to have the `found` variable.

Unless your goal is to use the last matching value in the case of duplicates,
instead of the first. If that is the case you should add a comment stating
so along with the reason,

And the structure could be written as

if (pin not in range)
continue;

... check value ...

which would decrease the nesting level. Mostly stylistic though.

> + }
> + } else {
> + if (rsel[check].down_rsel == arg) {
> + found = true;
> + *rsel_val = rsel[check].rsel_index;
> + break;
> + }
> + }
> + }
> + }
> +
> + if (!found) {
> + dev_err(hw->dev, "Not support rsel value %d Ohm for pin = %d (%s)\n",
> + arg, desc->number, desc->name);
> + return -ENOTSUPP;
> + }
> +
> + return 0;
> +}
> +

[...]

> +static int mtk_pinconf_bias_get_rsel(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 *pullup, u32 *enable)
> +{
> + int pu, pd, rsel, err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_RSEL, &rsel);
> + if (err)
> + goto out;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu);
> + if (err)
> + goto out;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);

mtk_pinconf_bias_get_pu_pd() couldn't be reused?

> +
> + if (pu == 0 && pd == 0) {
> + *pullup = 0;
> + *enable = MTK_DISABLE;
> + } else if (pu == 1 && pd == 0) {
> + *pullup = 1;
> + if (hw->rsel_si_unit)
> + mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
> + else
> + *enable = rsel + MTK_PULL_SET_RSEL_000;
> + } else if (pu == 0 && pd == 1) {
> + *pullup = 0;
> + if (hw->rsel_si_unit)
> + mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
> + else
> + *enable = rsel + MTK_PULL_SET_RSEL_000;
> + } else {
> + err = -EINVAL;
> + goto out;
> + }
> +
> +out:
> + return err;
> +}
> +
> static int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc,
> u32 *pullup, u32 *enable)
> @@ -742,44 +917,40 @@ static int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
> return err;
> }
>
> -int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
> - const struct mtk_pin_desc *desc,
> - u32 pullup, u32 arg)
> -{
> - int err;
> -
> - err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
> - if (!err)
> - goto out;
> -
> - err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg);
> - if (!err)
> - goto out;
> -
> - err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
> -
> -out:
> - return err;
> -}
> -EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
> -
> int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc,
> u32 *pullup, u32 *enable)
> {
> - int err;
> + int err = -ENOTSUPP;
> + u32 try_all_type;
>
> - err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
> - if (!err)
> - goto out;
> + if (hw->soc->pull_type)
> + try_all_type = hw->soc->pull_type[desc->number];
> + else
> + try_all_type = MTK_PULL_TYPE_MASK;
>
> - err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable);
> - if (!err)
> - goto out;
> + if (try_all_type & MTK_PULL_RSEL_TYPE) {
> + err = mtk_pinconf_bias_get_rsel(hw, desc, pullup, enable);
> + if (!err)
> + return err;
> + }
>
> - err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
> + if (try_all_type & MTK_PULL_PU_PD_TYPE) {
> + err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
> + if (!err)
> + return err;
> + }
> +
> + if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
> + err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc,
> + pullup, enable);
> + if (!err)
> + return err;
> + }
> +
> + if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
> + err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
>
> -out:
> return err;
> }
> EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_combo);
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> index a6f1bdb2083b..4908c7aedbe0 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> @@ -17,6 +17,22 @@
> #define MTK_ENABLE 1
> #define MTK_PULLDOWN 0
> #define MTK_PULLUP 1
> +#define MTK_PULL_PU_PD_TYPE BIT(0)
> +#define MTK_PULL_PULLSEL_TYPE BIT(1)
> +#define MTK_PULL_PUPD_R1R0_TYPE BIT(2)
> +/* MTK_PULL_RSEL_TYPE can select resistance and can be
> + * turned on/off itself. But it can't be selected pull up/down
> + */
> +#define MTK_PULL_RSEL_TYPE BIT(3)
> +/* MTK_PULL_PU_PD_RSEL_TYPE is a type which is controlled by
> + * MTK_PULL_PU_PD_TYPE and MTK_PULL_RSEL_TYPE.
> + */
> +#define MTK_PULL_PU_PD_RSEL_TYPE (MTK_PULL_PU_PD_TYPE \
> + | MTK_PULL_RSEL_TYPE)
> +#define MTK_PULL_TYPE_MASK (MTK_PULL_PU_PD_TYPE |\
> + MTK_PULL_PULLSEL_TYPE |\
> + MTK_PULL_PUPD_R1R0_TYPE |\
> + MTK_PULL_RSEL_TYPE)
>
> #define EINT_NA U16_MAX
> #define NO_EINT_SUPPORT EINT_NA
> @@ -42,6 +58,14 @@
> PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
> _x_bits, 32, 1)
>
> +#define PIN_RSEL(_s_pin, _e_pin, _rsel_index, _up_resl, _down_rsel) { \
> + .s_pin = _s_pin, \
> + .e_pin = _e_pin, \
> + .rsel_index = _rsel_index, \
> + .up_rsel = _up_resl, \
> + .down_rsel = _down_rsel, \
> + }
> +
> /* List these attributes which could be modified for the pin */
> enum {
> PINCTRL_PIN_REG_MODE,
> @@ -67,6 +91,7 @@ enum {
> PINCTRL_PIN_REG_DRV_E0,
> PINCTRL_PIN_REG_DRV_E1,
> PINCTRL_PIN_REG_DRV_ADV,
> + PINCTRL_PIN_REG_RSEL,
> PINCTRL_PIN_REG_MAX,
> };
>
> @@ -129,6 +154,21 @@ struct mtk_pin_field_calc {
> u8 fixed;
> };
>
> +/* struct mtk_pin_rsel - the structure that provides bias resistance selection.

Since you went through the trouble of documenting all the fields, would
you consider changing this to a kernel-doc style comment? It is similar
to Java-doc, and would be like:

/**
* struct mtk_pin_rsel ......
* @s_pin: ....
* ...
*/

Only the start of the comment block needs to be changed.
See Documentation/doc-guide/kernel-doc.rst if you are unsure.

> + * @s_pin: the start pin within the rsel range
> + * @e_pin: the end pin within the rsel range
> + * @rsel_index: the rsel bias resistance index
> + * @up_rsel: the pullup rsel bias resistance value
> + * @down_rsel: the pulldown rsel bias resistance value
> + */
> +struct mtk_pin_rsel {
> + u16 s_pin;
> + u16 e_pin;
> + u16 rsel_index;
> + u32 up_rsel;
> + u32 down_rsel;
> +};
> +
> /* struct mtk_pin_reg_calc - the structure that holds all ranges used to
> * determine which register the pin would make use of
> * for certain pin attribute.
> @@ -206,6 +246,9 @@ struct mtk_pin_soc {
> bool ies_present;
> const char * const *base_names;
> unsigned int nbase_names;
> + const unsigned int *pull_type;
> + const struct mtk_pin_rsel *pin_rsel;
> + unsigned int npin_rsel;
>
> /* Specific pinconfig operations */
> int (*bias_disable_set)(struct mtk_pinctrl *hw,
> @@ -254,6 +297,8 @@ struct mtk_pinctrl {
> const char **grp_names;
> /* lock pin's register resource to avoid multiple threads issue*/
> spinlock_t lock;
> + /* identify rsel setting by si unit or rsel define in dts node */
> + bool rsel_si_unit;
> };
>
> void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set);
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index 38aec0177d15..d4e02c5d74a8 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -579,8 +579,9 @@ static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int
> ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
> unsigned int gpio, char *buf, unsigned int buf_len)
> {
> - int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1;
> + int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1, rsel = -1;
> const struct mtk_pin_desc *desc;
> + u32 try_all_type;
>
> if (gpio >= hw->soc->npins)
> return -EINVAL;
> @@ -591,24 +592,39 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
> pinmux -= hw->soc->nfuncs;
>
> mtk_pinconf_bias_get_combo(hw, desc, &pullup, &pullen);
> - if (pullen == MTK_PUPD_SET_R1R0_00) {
> - pullen = 0;
> - r1 = 0;
> - r0 = 0;
> - } else if (pullen == MTK_PUPD_SET_R1R0_01) {
> - pullen = 1;
> - r1 = 0;
> - r0 = 1;
> - } else if (pullen == MTK_PUPD_SET_R1R0_10) {
> - pullen = 1;
> - r1 = 1;
> - r0 = 0;
> - } else if (pullen == MTK_PUPD_SET_R1R0_11) {
> +
> + if (hw->soc->pull_type)
> + try_all_type = hw->soc->pull_type[desc->number];
> +
> + if (hw->rsel_si_unit && (try_all_type & MTK_PULL_RSEL_TYPE)) {
> + rsel = pullen;
> pullen = 1;
> - r1 = 1;
> - r0 = 1;
> - } else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
> - pullen = 0;
> + } else {
> + /* Case for: R1R0 */
> + if (pullen == MTK_PUPD_SET_R1R0_00) {
> + pullen = 0;
> + r1 = 0;
> + r0 = 0;
> + } else if (pullen == MTK_PUPD_SET_R1R0_01) {
> + pullen = 1;
> + r1 = 0;
> + r0 = 1;
> + } else if (pullen == MTK_PUPD_SET_R1R0_10) {
> + pullen = 1;
> + r1 = 1;
> + r0 = 0;
> + } else if (pullen == MTK_PUPD_SET_R1R0_11) {
> + pullen = 1;
> + r1 = 1;
> + r0 = 1;
> + }
> +
> + /* Case for: RSEL */
> + if (pullen >= MTK_PULL_SET_RSEL_000 &&
> + pullen <= MTK_PULL_SET_RSEL_111) {
> + rsel = pullen - MTK_PULL_SET_RSEL_000;
> + pullen = 1;
> + }
> }
> len += scnprintf(buf + len, buf_len - len,
> "%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
> @@ -626,6 +642,8 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
> if (r1 != -1) {
> len += scnprintf(buf + len, buf_len - len, " (%1d %1d)\n",
> r1, r0);
> + } else if (rsel != -1) {
> + len += scnprintf(buf + len, buf_len - len, " (%1d)\n", rsel);
> } else {
> len += scnprintf(buf + len, buf_len - len, "\n");
> }
> @@ -970,6 +988,12 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
>
> hw->nbase = hw->soc->nbase_names;
>
> + if (of_find_property(hw->dev->of_node,
> + "mediatek,rsel_resistance_in_si_unit", NULL))

This new property should be documented in the bindings.


Regards
ChenYu




> + hw->rsel_si_unit = true;
> + else
> + hw->rsel_si_unit = false;
> +
> spin_lock_init(&hw->lock);
>
> err = mtk_pctrl_build_state(pdev);
> --
> 2.25.1
>
>
> _______________________________________________
> Linux-mediatek mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

2021-09-23 21:32:20

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v13 0/5] Mediatek pinctrl patch on mt8195

On Wed, Sep 22, 2021 at 4:56 AM Zhiyong Tao <[email protected]> wrote:

> This series includes 5 patches:
> 1.add rsel define.
> 2.change pull up/down description
> 3.fix coding style
> 4.support rsel feature for common ICs
> 5.add rsel setting on MT8195

It appears we have consensus so I have applied this patch set for v5.16!

I had a problem with the bindings patch because the context changed because
of another patch but I think I managed to fix ut up, please check the result!

Thanks to you and Chen-Yu for working this patch set out in close cooperation.

Yours,
Linus Walleij

2021-09-23 21:33:09

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v13 0/5] Mediatek pinctrl patch on mt8195

On Thu, Sep 23, 2021 at 11:27 PM Linus Walleij <[email protected]> wrote:
> On Wed, Sep 22, 2021 at 4:56 AM Zhiyong Tao <[email protected]> wrote:
>
> > This series includes 5 patches:
> > 1.add rsel define.
> > 2.change pull up/down description
> > 3.fix coding style
> > 4.support rsel feature for common ICs
> > 5.add rsel setting on MT8195
>
> It appears we have consensus so I have applied this patch set for v5.16!

Speaking too soon! It appears there was still comments on patch 4.
I blame my gmail.

I backed the patches out for now but this is starting to look really
good, try to make sure the patches also applies on the "devel"
branch in the pinctrl tree so I don't do any mistakes when merging!

Yours,
Linus Walleij