From: Andreas Hindborg <[email protected]>
Hi All,
This patch set adds zoned storage support to `ublk`. The first two patches do
some house cleaning in preparation for the last patch. The last patch adds
support for report_zones and the following operations:
- REQ_OP_ZONE_OPEN
- REQ_OP_ZONE_CLOSE
- REQ_OP_ZONE_FINISH
- REQ_OP_ZONE_RESET
- REQ_OP_ZONE_APPEND
A user space component based on ubdsrv is available for testing [1] with the
"loop" target.
Read/write and zone operations are tested with zenfs [2].
The zone append path is tested with fio -> zonefs -> ublk -> null_blk.
The series is based on v6.5-rc4.
Changes for v11
- Style fixes
- Use `kvmalloc()` instead of `__vmalloc()` for zone report buffer
[1] https://github.com/metaspace/ubdsrv/tree/2966e5f9637b5856d4a4273ae113e31b1c53ff98
[2] https://github.com/westerndigitalcorporation/zenfs
[3] https://git.kernel.dk/linux.git
Andreas Hindborg (3):
ublk: add helper to check if device supports user copy
ublk: move check for empty address field on command submission
ublk: enable zoned storage support
drivers/block/ublk_drv.c | 348 ++++++++++++++++++++++++++++++++--
include/uapi/linux/ublk_cmd.h | 63 +++++-
2 files changed, 383 insertions(+), 28 deletions(-)
base-commit: 5d0c230f1de8c7515b6567d9afba1f196fb4e2f4
--
2.41.0
From: Andreas Hindborg <[email protected]>
Add zoned storage support to ublk: report_zones and operations:
- REQ_OP_ZONE_OPEN
- REQ_OP_ZONE_CLOSE
- REQ_OP_ZONE_FINISH
- REQ_OP_ZONE_RESET
- REQ_OP_ZONE_APPEND
The zone append feature uses the `addr` field of `struct ublksrv_io_cmd` to
communicate ALBA back to the kernel. Therefore ublk must be used with the
user copy feature (UBLK_F_USER_COPY) for zoned storage support to be
available. Without this feature, ublk will not allow zoned storage support.
Signed-off-by: Andreas Hindborg <[email protected]>
---
drivers/block/ublk_drv.c | 331 ++++++++++++++++++++++++++++++++--
include/uapi/linux/ublk_cmd.h | 63 ++++++-
2 files changed, 370 insertions(+), 24 deletions(-)
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 5dba4b27d820..85a81ee556d5 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -56,16 +56,21 @@
| UBLK_F_USER_RECOVERY_REISSUE \
| UBLK_F_UNPRIVILEGED_DEV \
| UBLK_F_CMD_IOCTL_ENCODE \
- | UBLK_F_USER_COPY)
+ | UBLK_F_USER_COPY \
+ | UBLK_F_ZONED)
/* All UBLK_PARAM_TYPE_* should be included here */
-#define UBLK_PARAM_TYPE_ALL (UBLK_PARAM_TYPE_BASIC | \
- UBLK_PARAM_TYPE_DISCARD | UBLK_PARAM_TYPE_DEVT)
+#define UBLK_PARAM_TYPE_ALL \
+ (UBLK_PARAM_TYPE_BASIC | UBLK_PARAM_TYPE_DISCARD | \
+ UBLK_PARAM_TYPE_DEVT | UBLK_PARAM_TYPE_ZONED)
struct ublk_rq_data {
struct llist_node node;
struct kref ref;
+ __u64 sector;
+ __u32 operation;
+ __u32 nr_zones;
};
struct ublk_uring_cmd_pdu {
@@ -185,11 +190,263 @@ struct ublk_params_header {
__u32 types;
};
+static inline unsigned int ublk_req_build_flags(struct request *req);
+static inline struct ublksrv_io_desc *ublk_get_iod(struct ublk_queue *ubq,
+ int tag);
+
static inline bool ublk_dev_is_user_copy(const struct ublk_device *ub)
{
return ub->dev_info.flags & UBLK_F_USER_COPY;
}
+static inline bool ublk_dev_is_zoned(const struct ublk_device *ub)
+{
+ return ub->dev_info.flags & UBLK_F_ZONED;
+}
+
+static inline bool ublk_queue_is_zoned(struct ublk_queue *ubq)
+{
+ return ubq->flags & UBLK_F_ZONED;
+}
+
+#ifdef CONFIG_BLK_DEV_ZONED
+
+static int ublk_get_nr_zones(const struct ublk_device *ub)
+{
+ const struct ublk_param_basic *p = &ub->params.basic;
+
+ /* Zone size is a power of 2 */
+ return p->dev_sectors >> ilog2(p->chunk_sectors);
+}
+
+static int ublk_revalidate_disk_zones(struct ublk_device *ub)
+{
+ return blk_revalidate_disk_zones(ub->ub_disk, NULL);
+}
+
+static int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
+{
+ const struct ublk_param_zoned *p = &ub->params.zoned;
+ int nr_zones;
+
+ if (!ublk_dev_is_zoned(ub))
+ return -EINVAL;
+
+ if (!p->max_zone_append_sectors)
+ return -EINVAL;
+
+ nr_zones = ublk_get_nr_zones(ub);
+
+ if (p->max_active_zones > nr_zones)
+ return -EINVAL;
+
+ if (p->max_open_zones > nr_zones)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int ublk_dev_param_zoned_apply(struct ublk_device *ub)
+{
+ const struct ublk_param_zoned *p = &ub->params.zoned;
+
+ disk_set_zoned(ub->ub_disk, BLK_ZONED_HM);
+ blk_queue_required_elevator_features(ub->ub_disk->queue,
+ ELEVATOR_F_ZBD_SEQ_WRITE);
+ disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
+ disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
+ blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
+
+ ub->ub_disk->nr_zones = ublk_get_nr_zones(ub);
+
+ return 0;
+}
+
+/* Based on virtblk_alloc_report_buffer */
+static void *ublk_alloc_report_buffer(struct ublk_device *ublk,
+ unsigned int nr_zones, size_t *buflen)
+{
+ struct request_queue *q = ublk->ub_disk->queue;
+ size_t bufsize;
+ void *buf;
+
+ nr_zones = min_t(unsigned int, nr_zones,
+ ublk->ub_disk->nr_zones);
+
+ bufsize = nr_zones * sizeof(struct blk_zone);
+ bufsize =
+ min_t(size_t, bufsize, queue_max_hw_sectors(q) << SECTOR_SHIFT);
+
+ while (bufsize >= sizeof(struct blk_zone)) {
+ buf = kvmalloc(bufsize, GFP_KERNEL | __GFP_NORETRY);
+ if (buf) {
+ *buflen = bufsize;
+ return buf;
+ }
+ bufsize >>= 1;
+ }
+
+ *buflen = 0;
+ return NULL;
+}
+
+static int ublk_report_zones(struct gendisk *disk, sector_t sector,
+ unsigned int nr_zones, report_zones_cb cb, void *data)
+{
+ struct ublk_device *ub = disk->private_data;
+ unsigned int zone_size_sectors = disk->queue->limits.chunk_sectors;
+ unsigned int first_zone = sector >> ilog2(zone_size_sectors);
+ unsigned int done_zones = 0;
+ unsigned int max_zones_per_request;
+ int ret;
+ struct blk_zone *buffer;
+ size_t buffer_length;
+
+ nr_zones = min_t(unsigned int, ub->ub_disk->nr_zones - first_zone,
+ nr_zones);
+
+ buffer = ublk_alloc_report_buffer(ub, nr_zones, &buffer_length);
+ if (!buffer)
+ return -ENOMEM;
+
+ max_zones_per_request = buffer_length / sizeof(struct blk_zone);
+
+ while (done_zones < nr_zones) {
+ unsigned int remaining_zones = nr_zones - done_zones;
+ unsigned int zones_in_request =
+ min_t(unsigned int, remaining_zones, max_zones_per_request);
+ struct request *req;
+ struct ublk_rq_data *pdu;
+ blk_status_t status;
+
+ memset(buffer, 0, buffer_length);
+
+ req = blk_mq_alloc_request(disk->queue, REQ_OP_DRV_IN, 0);
+ if (IS_ERR(req)) {
+ ret = PTR_ERR(req);
+ goto out;
+ }
+
+ pdu = blk_mq_rq_to_pdu(req);
+ pdu->operation = UBLK_IO_OP_REPORT_ZONES;
+ pdu->sector = sector;
+ pdu->nr_zones = zones_in_request;
+
+ ret = blk_rq_map_kern(disk->queue, req, buffer, buffer_length,
+ GFP_KERNEL);
+ if (ret) {
+ blk_mq_free_request(req);
+ goto out;
+ }
+
+ status = blk_execute_rq(req, 0);
+ ret = blk_status_to_errno(status);
+ blk_mq_free_request(req);
+ if (ret)
+ goto out;
+
+ for (unsigned int i = 0; i < zones_in_request; i++) {
+ struct blk_zone *zone = buffer + i;
+
+ /* A zero length zone means no more zones in this response */
+ if (!zone->len)
+ break;
+
+ ret = cb(zone, i, data);
+ if (ret)
+ goto out;
+
+ done_zones++;
+ sector += zone_size_sectors;
+
+ }
+ }
+
+ ret = done_zones;
+
+out:
+ kvfree(buffer);
+ return ret;
+}
+
+static blk_status_t ublk_setup_iod_zoned(struct ublk_queue *ubq,
+ struct request *req)
+{
+ struct ublksrv_io_desc *iod = ublk_get_iod(ubq, req->tag);
+ struct ublk_io *io = &ubq->ios[req->tag];
+ struct ublk_rq_data *pdu = blk_mq_rq_to_pdu(req);
+ u32 ublk_op;
+
+ switch (req_op(req)) {
+ case REQ_OP_ZONE_OPEN:
+ ublk_op = UBLK_IO_OP_ZONE_OPEN;
+ break;
+ case REQ_OP_ZONE_CLOSE:
+ ublk_op = UBLK_IO_OP_ZONE_CLOSE;
+ break;
+ case REQ_OP_ZONE_FINISH:
+ ublk_op = UBLK_IO_OP_ZONE_FINISH;
+ break;
+ case REQ_OP_ZONE_RESET:
+ ublk_op = UBLK_IO_OP_ZONE_RESET;
+ break;
+ case REQ_OP_ZONE_APPEND:
+ ublk_op = UBLK_IO_OP_ZONE_APPEND;
+ break;
+ case REQ_OP_DRV_IN:
+ ublk_op = pdu->operation;
+ switch (ublk_op) {
+ case UBLK_IO_OP_REPORT_ZONES:
+ iod->op_flags = ublk_op | ublk_req_build_flags(req);
+ iod->nr_zones = pdu->nr_zones;
+ iod->start_sector = pdu->sector;
+ return BLK_STS_OK;
+ default:
+ return BLK_STS_IOERR;
+ }
+ case REQ_OP_ZONE_RESET_ALL:
+ case REQ_OP_DRV_OUT:
+ /* We do not support reset_all and drv_out */
+ return BLK_STS_NOTSUPP;
+ default:
+ return BLK_STS_IOERR;
+ }
+
+ iod->op_flags = ublk_op | ublk_req_build_flags(req);
+ iod->nr_sectors = blk_rq_sectors(req);
+ iod->start_sector = blk_rq_pos(req);
+ iod->addr = io->addr;
+
+ return BLK_STS_OK;
+}
+
+#else
+
+#define ublk_report_zones (NULL)
+
+static int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
+{
+ return -EOPNOTSUPP;
+}
+
+static int ublk_dev_param_zoned_apply(struct ublk_device *ub)
+{
+ return -EOPNOTSUPP;
+}
+
+static int ublk_revalidate_disk_zones(struct ublk_device *ub)
+{
+ return 0;
+}
+
+static blk_status_t ublk_setup_iod_zoned(struct ublk_queue *ubq,
+ struct request *req)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
+
static inline void __ublk_complete_rq(struct request *req);
static void ublk_complete_rq(struct kref *ref);
@@ -286,6 +543,9 @@ static int ublk_validate_params(const struct ublk_device *ub)
if (p->max_sectors > (ub->dev_info.max_io_buf_bytes >> 9))
return -EINVAL;
+
+ if (ublk_dev_is_zoned(ub) && !p->chunk_sectors)
+ return -EINVAL;
} else
return -EINVAL;
@@ -304,6 +564,11 @@ static int ublk_validate_params(const struct ublk_device *ub)
if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
return -EINVAL;
+ if (ub->params.types & UBLK_PARAM_TYPE_ZONED)
+ return ublk_dev_param_zoned_validate(ub);
+ else if (ublk_dev_is_zoned(ub))
+ return -EINVAL;
+
return 0;
}
@@ -317,6 +582,9 @@ static int ublk_apply_params(struct ublk_device *ub)
if (ub->params.types & UBLK_PARAM_TYPE_DISCARD)
ublk_dev_param_discard_apply(ub);
+ if (ub->params.types & UBLK_PARAM_TYPE_ZONED)
+ return ublk_dev_param_zoned_apply(ub);
+
return 0;
}
@@ -487,6 +755,7 @@ static const struct block_device_operations ub_fops = {
.owner = THIS_MODULE,
.open = ublk_open,
.free_disk = ublk_free_disk,
+ .report_zones = ublk_report_zones,
};
#define UBLK_MAX_PIN_PAGES 32
@@ -601,7 +870,8 @@ static inline bool ublk_need_map_req(const struct request *req)
static inline bool ublk_need_unmap_req(const struct request *req)
{
- return ublk_rq_has_data(req) && req_op(req) == REQ_OP_READ;
+ return ublk_rq_has_data(req) &&
+ (req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN);
}
static int ublk_map_io(const struct ublk_queue *ubq, const struct request *req,
@@ -685,8 +955,13 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
{
struct ublksrv_io_desc *iod = ublk_get_iod(ubq, req->tag);
struct ublk_io *io = &ubq->ios[req->tag];
+ enum req_op op = req_op(req);
u32 ublk_op;
+ if (!ublk_queue_is_zoned(ubq) &&
+ (op_is_zone_mgmt(op) || op == REQ_OP_ZONE_APPEND))
+ return -EIO;
+
switch (req_op(req)) {
case REQ_OP_READ:
ublk_op = UBLK_IO_OP_READ;
@@ -704,6 +979,8 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
ublk_op = UBLK_IO_OP_WRITE_ZEROES;
break;
default:
+ if (ublk_queue_is_zoned(ubq))
+ return ublk_setup_iod_zoned(ubq, req);
return BLK_STS_IOERR;
}
@@ -756,7 +1033,8 @@ static inline void __ublk_complete_rq(struct request *req)
*
* Both the two needn't unmap.
*/
- if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE)
+ if (req_op(req) != REQ_OP_READ && req_op(req) != REQ_OP_WRITE &&
+ req_op(req) != REQ_OP_DRV_IN)
goto exit;
/* for READ request, writing data in iod->addr to rq buffers */
@@ -1120,6 +1398,9 @@ static void ublk_commit_completion(struct ublk_device *ub,
/* find the io request and complete */
req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
+ if (req_op(req) == REQ_OP_ZONE_APPEND)
+ req->__sector = ub_cmd->zone_append_lba;
+
if (req && likely(!blk_should_fake_timeout(req->q)))
ublk_put_req_ref(ubq, req);
}
@@ -1468,8 +1749,11 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
if (!ub_cmd->addr && (!ublk_need_get_data(ubq) ||
req_op(req) == REQ_OP_READ))
goto out;
- } else if (ub_cmd->addr) {
- /* User copy requires addr to be unset */
+ } else if (req_op(req) != REQ_OP_ZONE_APPEND && ub_cmd->addr) {
+ /*
+ * User copy requires addr to be unset when command is
+ * not zone append
+ */
ret = -EINVAL;
goto out;
}
@@ -1546,11 +1830,14 @@ static inline bool ublk_check_ubuf_dir(const struct request *req,
int ubuf_dir)
{
/* copy ubuf to request pages */
- if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
+ if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
+ ubuf_dir == ITER_SOURCE)
return true;
/* copy request pages to ubuf */
- if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
+ if ((req_op(req) == REQ_OP_WRITE ||
+ req_op(req) == REQ_OP_ZONE_APPEND) &&
+ ubuf_dir == ITER_DEST)
return true;
return false;
@@ -1890,17 +2177,24 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
get_device(&ub->cdev_dev);
ub->dev_info.state = UBLK_S_DEV_LIVE;
+
+ if (ublk_dev_is_zoned(ub)) {
+ ret = ublk_revalidate_disk_zones(ub);
+ if (ret)
+ goto out_put_cdev;
+ }
+
ret = add_disk(disk);
+ if (ret)
+ goto out_put_cdev;
+
+ set_bit(UB_STATE_USED, &ub->state);
+
+out_put_cdev:
if (ret) {
- /*
- * Has to drop the reference since ->free_disk won't be
- * called in case of add_disk failure.
- */
ub->dev_info.state = UBLK_S_DEV_DEAD;
ublk_put_device(ub);
- goto out_put_disk;
}
- set_bit(UB_STATE_USED, &ub->state);
out_put_disk:
if (ret)
put_disk(disk);
@@ -2050,6 +2344,13 @@ static int ublk_ctrl_add_dev(struct io_uring_cmd *cmd)
if (ublk_dev_is_user_copy(ub))
ub->dev_info.flags &= ~UBLK_F_NEED_GET_DATA;
+ /* Zoned storage support requires user copy feature */
+ if (ublk_dev_is_zoned(ub) &&
+ (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) || !ublk_dev_is_user_copy(ub))) {
+ ret = -EINVAL;
+ goto out_free_dev_number;
+ }
+
/* We are not ready to support zero copy */
ub->dev_info.flags &= ~UBLK_F_SUPPORT_ZERO_COPY;
diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
index 4b8558db90e1..2685e53e4752 100644
--- a/include/uapi/linux/ublk_cmd.h
+++ b/include/uapi/linux/ublk_cmd.h
@@ -176,6 +176,12 @@
/* Copy between request and user buffer by pread()/pwrite() */
#define UBLK_F_USER_COPY (1UL << 7)
+/*
+ * User space sets this flag when setting up the device to request zoned storage support. Kernel may
+ * deny the request by returning an error.
+ */
+#define UBLK_F_ZONED (1ULL << 8)
+
/* device state */
#define UBLK_S_DEV_DEAD 0
#define UBLK_S_DEV_LIVE 1
@@ -232,9 +238,26 @@ struct ublksrv_ctrl_dev_info {
#define UBLK_IO_OP_READ 0
#define UBLK_IO_OP_WRITE 1
#define UBLK_IO_OP_FLUSH 2
-#define UBLK_IO_OP_DISCARD 3
-#define UBLK_IO_OP_WRITE_SAME 4
-#define UBLK_IO_OP_WRITE_ZEROES 5
+#define UBLK_IO_OP_DISCARD 3
+#define UBLK_IO_OP_WRITE_SAME 4
+#define UBLK_IO_OP_WRITE_ZEROES 5
+#define UBLK_IO_OP_ZONE_OPEN 10
+#define UBLK_IO_OP_ZONE_CLOSE 11
+#define UBLK_IO_OP_ZONE_FINISH 12
+#define UBLK_IO_OP_ZONE_APPEND 13
+#define UBLK_IO_OP_ZONE_RESET 15
+/*
+ * Construct a zone report. The report request is carried in `struct
+ * ublksrv_io_desc`. The `start_sector` field must be the first sector of a zone
+ * and shall indicate the first zone of the report. The `nr_zones` shall
+ * indicate how many zones should be reported at most. The report shall be
+ * delivered as a `struct blk_zone` array. To report fewer zones than requested,
+ * zero the last entry of the returned array.
+ *
+ * Related definitions(blk_zone, blk_zone_cond, blk_zone_type, ...) in
+ * include/uapi/linux/blkzoned.h are part of ublk UAPI.
+ */
+#define UBLK_IO_OP_REPORT_ZONES 18
#define UBLK_IO_F_FAILFAST_DEV (1U << 8)
#define UBLK_IO_F_FAILFAST_TRANSPORT (1U << 9)
@@ -255,7 +278,10 @@ struct ublksrv_io_desc {
/* op: bit 0-7, flags: bit 8-31 */
__u32 op_flags;
- __u32 nr_sectors;
+ union {
+ __u32 nr_sectors;
+ __u32 nr_zones; /* for UBLK_IO_OP_REPORT_ZONES */
+ };
/* start sector for this io */
__u64 start_sector;
@@ -284,11 +310,21 @@ struct ublksrv_io_cmd {
/* io result, it is valid for COMMIT* command only */
__s32 result;
- /*
- * userspace buffer address in ublksrv daemon process, valid for
- * FETCH* command only
- */
- __u64 addr;
+ union {
+ /*
+ * userspace buffer address in ublksrv daemon process, valid for
+ * FETCH* command only
+ *
+ * `addr` should not be used when UBLK_F_USER_COPY is enabled,
+ * because userspace handles data copy by pread()/pwrite() over
+ * /dev/ublkcN. But in case of UBLK_F_ZONED, this union is
+ * re-used to pass back the allocated LBA for
+ * UBLK_IO_OP_ZONE_APPEND which actually depends on
+ * UBLK_F_USER_COPY
+ */
+ __u64 addr;
+ __u64 zone_append_lba;
+ };
};
struct ublk_param_basic {
@@ -331,6 +367,13 @@ struct ublk_param_devt {
__u32 disk_minor;
};
+struct ublk_param_zoned {
+ __u32 max_open_zones;
+ __u32 max_active_zones;
+ __u32 max_zone_append_sectors;
+ __u8 reserved[20];
+};
+
struct ublk_params {
/*
* Total length of parameters, userspace has to set 'len' for both
@@ -342,11 +385,13 @@ struct ublk_params {
#define UBLK_PARAM_TYPE_BASIC (1 << 0)
#define UBLK_PARAM_TYPE_DISCARD (1 << 1)
#define UBLK_PARAM_TYPE_DEVT (1 << 2)
+#define UBLK_PARAM_TYPE_ZONED (1 << 3)
__u32 types; /* types of parameter included */
struct ublk_param_basic basic;
struct ublk_param_discard discard;
struct ublk_param_devt devt;
+ struct ublk_param_zoned zoned;
};
#endif
--
2.41.0
On Fri, Aug 4, 2023 at 8:34 PM Andreas Hindborg (Samsung)
<[email protected]> wrote:
>
> From: Andreas Hindborg <[email protected]>
>
> Add zoned storage support to ublk: report_zones and operations:
> - REQ_OP_ZONE_OPEN
> - REQ_OP_ZONE_CLOSE
> - REQ_OP_ZONE_FINISH
> - REQ_OP_ZONE_RESET
> - REQ_OP_ZONE_APPEND
>
> The zone append feature uses the `addr` field of `struct ublksrv_io_cmd` to
> communicate ALBA back to the kernel. Therefore ublk must be used with the
> user copy feature (UBLK_F_USER_COPY) for zoned storage support to be
> available. Without this feature, ublk will not allow zoned storage support.
>
> Signed-off-by: Andreas Hindborg <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Tested-by: Ming Lei <[email protected]>
Thanks,
On Fri, 04 Aug 2023 13:46:07 +0200, Andreas Hindborg (Samsung) wrote:
> This patch set adds zoned storage support to `ublk`. The first two patches do
> some house cleaning in preparation for the last patch. The last patch adds
> support for report_zones and the following operations:
>
> - REQ_OP_ZONE_OPEN
> - REQ_OP_ZONE_CLOSE
> - REQ_OP_ZONE_FINISH
> - REQ_OP_ZONE_RESET
> - REQ_OP_ZONE_APPEND
>
> [...]
Applied, thanks!
[1/3] ublk: add helper to check if device supports user copy
commit: 9d4ed6d46272bb60036a6539aae74eafcbbb3d2d
[2/3] ublk: move check for empty address field on command submission
commit: 1a6e88b9593b63ccdfe1d84e3f99dd91e4f8d490
[3/3] ublk: enable zoned storage support
commit: 29802d7ca33bc0a75c9da2a143eeed4f9e99fca4
Best regards,
--
Jens Axboe