Hi,
On Wed, May 24, 2023 at 12:28 AM Cong Yang
<[email protected]> wrote:
>
> The Starry-himax83102-j02 is a 10.51" WUXGA TFT panel. which fits in nicely
> with the existing panel-boe-tv101wum-nl6 driver. From the datasheet[1], MIPI
> needs to keep the LP11 state before the lcm_reset pin is pulled high, so
> increase lp11_before_reset flag.
>
> [1]: https://github.com/HimaxSoftware/Doc/tree/main/Himax_Chipset_Power_Sequence
>
> Signed-off-by: Cong Yang <[email protected]>
> ---
> .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 100 ++++++++++++++++++
> 1 file changed, 100 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> index f5a6046f1d19..5c8ec263e11f 100644
> --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
> @@ -76,6 +76,75 @@ struct panel_init_cmd {
> .len = sizeof((char[]){__VA_ARGS__}), \
> .data = (char[]){__VA_ARGS__} }
>
> +static const struct panel_init_cmd starry_himax83102_j02_init_cmd[] = {
nit: Please have the order of the tables match the order they're
referenced. That means this should come _after_
"starry_qfh032011_53g_init_cmd", not at the start of the tables.
-Doug