v2: - write TEE with capital letters.
- declare __optee_enumerate_device() as static.
Hello,
This patchset fixes issues with probing() tee, optee and optee driver
if they were compiled into kernel, built as modules or any mixed
combination.
These changes require optee-os changes which already were merged.
Main corresponding commits are:
https://github.com/OP-TEE/optee_os/commit/9389d8030ef198c9d7b8ab7ea8e877e0ace3369d
https://github.com/OP-TEE/optee_os/commit/bc5921cdab538c8ae48422f5ffd600f1cbdd95b2
optee_enumerate_devices() which discovers Trusted Applications on tee
bus is split up on 2 changes. Do probe of drivers which do not require
userspace support of tee-supplicant and stage two to run drivers with
support of tee-supplicant only after tee supplicant run.
Best regards,
Maxim.
Maxim Uvarov (2):
optee: do drivers initialization before and after tee-supplicant run
tpm_ftpm_tee: register driver on TEE bus
drivers/char/tpm/tpm_ftpm_tee.c | 69 ++++++++++++++++++++++++++-----
drivers/tee/optee/core.c | 25 +++++++++--
drivers/tee/optee/device.c | 17 +++++---
drivers/tee/optee/optee_private.h | 8 +++-
4 files changed, 99 insertions(+), 20 deletions(-)
--
2.17.1
Some drivers (like ftpm) can operate only after tee-supplicant
runs becase of tee-supplicant provides things like storage
services. This patch splits probe of non tee-supplicant dependable
drivers to early stage, and after tee-supplicant run probe other
drivers.
Signed-off-by: Maxim Uvarov <[email protected]>
Suggested-by: Sumit Garg <[email protected]>
Suggested-by: Arnd Bergmann <[email protected]>
---
drivers/tee/optee/core.c | 25 ++++++++++++++++++++++---
drivers/tee/optee/device.c | 17 +++++++++++------
drivers/tee/optee/optee_private.h | 8 +++++++-
3 files changed, 40 insertions(+), 10 deletions(-)
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 99698b8a3a74..dd2265c44907 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -17,6 +17,7 @@
#include <linux/tee_drv.h>
#include <linux/types.h>
#include <linux/uaccess.h>
+#include <linux/workqueue.h>
#include "optee_private.h"
#include "optee_smc.h"
#include "shm_pool.h"
@@ -218,6 +219,15 @@ static void optee_get_version(struct tee_device *teedev,
*vers = v;
}
+static void optee_bus_scan(struct work_struct *work)
+{
+ int rc;
+
+ rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP);
+ if (rc)
+ pr_err("optee_enumerate_devices failed %d\n", rc);
+}
+
static int optee_open(struct tee_context *ctx)
{
struct optee_context_data *ctxdata;
@@ -241,8 +251,15 @@ static int optee_open(struct tee_context *ctx)
kfree(ctxdata);
return -EBUSY;
}
- }
+ INIT_WORK(&optee->scan_bus_work, optee_bus_scan);
+ optee->scan_bus_wq = create_workqueue("optee_bus_scan");
+ if (!optee->scan_bus_wq) {
+ pr_err("optee: couldn't create workqueue\n");
+ return -ECHILD;
+ }
+ queue_work(optee->scan_bus_wq, &optee->scan_bus_work);
+ }
mutex_init(&ctxdata->mutex);
INIT_LIST_HEAD(&ctxdata->sess_list);
@@ -296,8 +313,10 @@ static void optee_release(struct tee_context *ctx)
ctx->data = NULL;
- if (teedev == optee->supp_teedev)
+ if (teedev == optee->supp_teedev) {
+ destroy_workqueue(optee->scan_bus_wq);
optee_supp_release(&optee->supp);
+ }
}
static const struct tee_driver_ops optee_ops = {
@@ -675,7 +694,7 @@ static int optee_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, optee);
- rc = optee_enumerate_devices();
+ rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES);
if (rc) {
optee_remove(pdev);
return rc;
diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
index e3a148521ec1..d4931dad07aa 100644
--- a/drivers/tee/optee/device.c
+++ b/drivers/tee/optee/device.c
@@ -21,7 +21,6 @@
* TEE_ERROR_BAD_PARAMETERS - Incorrect input param
* TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
*/
-#define PTA_CMD_GET_DEVICES 0x0
static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
{
@@ -32,7 +31,8 @@ static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
}
static int get_devices(struct tee_context *ctx, u32 session,
- struct tee_shm *device_shm, u32 *shm_size)
+ struct tee_shm *device_shm, u32 *shm_size,
+ u32 func)
{
int ret = 0;
struct tee_ioctl_invoke_arg inv_arg;
@@ -42,7 +42,7 @@ static int get_devices(struct tee_context *ctx, u32 session,
memset(¶m, 0, sizeof(param));
/* Invoke PTA_CMD_GET_DEVICES function */
- inv_arg.func = PTA_CMD_GET_DEVICES;
+ inv_arg.func = func;
inv_arg.session = session;
inv_arg.num_params = 4;
@@ -87,7 +87,7 @@ static int optee_register_device(const uuid_t *device_uuid, u32 device_id)
return rc;
}
-int optee_enumerate_devices(void)
+static int __optee_enumerate_devices(u32 func)
{
const uuid_t pta_uuid =
UUID_INIT(0x7011a688, 0xddde, 0x4053,
@@ -118,7 +118,7 @@ int optee_enumerate_devices(void)
goto out_ctx;
}
- rc = get_devices(ctx, sess_arg.session, NULL, &shm_size);
+ rc = get_devices(ctx, sess_arg.session, NULL, &shm_size, func);
if (rc < 0 || !shm_size)
goto out_sess;
@@ -130,7 +130,7 @@ int optee_enumerate_devices(void)
goto out_sess;
}
- rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
+ rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size, func);
if (rc < 0)
goto out_shm;
@@ -158,3 +158,8 @@ int optee_enumerate_devices(void)
return rc;
}
+
+int optee_enumerate_devices(u32 func)
+{
+ return __optee_enumerate_devices(func);
+}
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index d9c5037b4e03..6cdac4bb7253 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -78,6 +78,8 @@ struct optee_supp {
* @memremaped_shm virtual address of memory in shared memory pool
* @sec_caps: secure world capabilities defined by
* OPTEE_SMC_SEC_CAP_* in optee_smc.h
+ * @scan_bus_wq workqueue to scan optee bus and register optee drivers
+ * @scan_bus_work workq to scan optee bus and register optee drivers
*/
struct optee {
struct tee_device *supp_teedev;
@@ -89,6 +91,8 @@ struct optee {
struct tee_shm_pool *pool;
void *memremaped_shm;
u32 sec_caps;
+ struct workqueue_struct *scan_bus_wq;
+ struct work_struct scan_bus_work;
};
struct optee_session {
@@ -173,7 +177,9 @@ void optee_free_pages_list(void *array, size_t num_entries);
void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
size_t page_offset);
-int optee_enumerate_devices(void);
+#define PTA_CMD_GET_DEVICES 0x0
+#define PTA_CMD_GET_DEVICES_SUPP 0x1
+int optee_enumerate_devices(u32 func);
/*
* Small helpers
--
2.17.1
Register driver on tee bus. module tee registers bus,
and module optee calls optee_enumerate_devices() to scan
all devices on the bus. This TA can be Early TA's ( can be
compiled into optee-os). In that case it will be on optee
bus before linux booting. Also optee-suplicant application
is needed to be loaded between optee module and ftpm module to
to maintain functionality for ftpm driver.
Signed-off-by: Maxim Uvarov <[email protected]>
Suggested-by: Sumit Garg <[email protected]>
Suggested-by: Arnd Bergmann <[email protected]>
---
drivers/char/tpm/tpm_ftpm_tee.c | 69 ++++++++++++++++++++++++++++-----
1 file changed, 59 insertions(+), 10 deletions(-)
diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
index 22bf553ccf9d..7bb4ce281050 100644
--- a/drivers/char/tpm/tpm_ftpm_tee.c
+++ b/drivers/char/tpm/tpm_ftpm_tee.c
@@ -214,11 +214,10 @@ static int ftpm_tee_match(struct tee_ioctl_version_data *ver, const void *data)
* Return:
* On success, 0. On failure, -errno.
*/
-static int ftpm_tee_probe(struct platform_device *pdev)
+static int ftpm_tee_probe(struct device *dev)
{
int rc;
struct tpm_chip *chip;
- struct device *dev = &pdev->dev;
struct ftpm_tee_private *pvt_data = NULL;
struct tee_ioctl_open_session_arg sess_arg;
@@ -297,6 +296,13 @@ static int ftpm_tee_probe(struct platform_device *pdev)
return rc;
}
+static int ftpm_plat_tee_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ return ftpm_tee_probe(dev);
+}
+
/**
* ftpm_tee_remove() - remove the TPM device
* @pdev: the platform_device description.
@@ -304,9 +310,9 @@ static int ftpm_tee_probe(struct platform_device *pdev)
* Return:
* 0 always.
*/
-static int ftpm_tee_remove(struct platform_device *pdev)
+static int ftpm_tee_remove(struct device *dev)
{
- struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
+ struct ftpm_tee_private *pvt_data = dev_get_drvdata(dev);
/* Release the chip */
tpm_chip_unregister(pvt_data->chip);
@@ -328,11 +334,18 @@ static int ftpm_tee_remove(struct platform_device *pdev)
return 0;
}
+static int ftpm_plat_tee_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ return ftpm_tee_remove(dev);
+}
+
/**
* ftpm_tee_shutdown() - shutdown the TPM device
* @pdev: the platform_device description.
*/
-static void ftpm_tee_shutdown(struct platform_device *pdev)
+static void ftpm_plat_tee_shutdown(struct platform_device *pdev)
{
struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
@@ -347,17 +360,53 @@ static const struct of_device_id of_ftpm_tee_ids[] = {
};
MODULE_DEVICE_TABLE(of, of_ftpm_tee_ids);
-static struct platform_driver ftpm_tee_driver = {
+static struct platform_driver ftpm_tee_plat_driver = {
.driver = {
.name = "ftpm-tee",
.of_match_table = of_match_ptr(of_ftpm_tee_ids),
},
- .probe = ftpm_tee_probe,
- .remove = ftpm_tee_remove,
- .shutdown = ftpm_tee_shutdown,
+ .shutdown = ftpm_plat_tee_shutdown,
+ .probe = ftpm_plat_tee_probe,
+ .remove = ftpm_plat_tee_remove,
+};
+
+static const struct tee_client_device_id optee_ftpm_id_table[] = {
+ {UUID_INIT(0xbc50d971, 0xd4c9, 0x42c4,
+ 0x82, 0xcb, 0x34, 0x3f, 0xb7, 0xf3, 0x78, 0x96)},
+ {}
};
-module_platform_driver(ftpm_tee_driver);
+MODULE_DEVICE_TABLE(tee, optee_ftpm_id_table);
+
+static struct tee_client_driver ftpm_tee_driver = {
+ .id_table = optee_ftpm_id_table,
+ .driver = {
+ .name = "optee-ftpm",
+ .bus = &tee_bus_type,
+ .probe = ftpm_tee_probe,
+ .remove = ftpm_tee_remove,
+ },
+};
+
+static int __init ftpm_mod_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&ftpm_tee_plat_driver);
+ if (rc)
+ return rc;
+
+ return driver_register(&ftpm_tee_driver.driver);
+}
+
+static void __exit ftpm_mod_exit(void)
+{
+ platform_driver_unregister(&ftpm_tee_plat_driver);
+ driver_unregister(&ftpm_tee_driver.driver);
+}
+
+module_init(ftpm_mod_init);
+module_exit(ftpm_mod_exit);
MODULE_AUTHOR("Thirupathaiah Annapureddy <[email protected]>");
MODULE_DESCRIPTION("TPM Driver for fTPM TA in TEE");
--
2.17.1
Register driver on TEE bus. module tee registers bus,
and module optee calls optee_enumerate_devices() to scan
all devices on the bus. Trusted Application for this driver
can be Early TA's (can be compiled into optee-os). In that
case it will be on OPTEE bus before linux booting. Also
optee-suplicant application is needed to be loaded between
OPTEE module and ftpm module to maintain functionality
for fTPM driver.
Signed-off-by: Maxim Uvarov <[email protected]>
Suggested-by: Sumit Garg <[email protected]>
Suggested-by: Arnd Bergmann <[email protected]>
---
drivers/char/tpm/tpm_ftpm_tee.c | 69 ++++++++++++++++++++++++++++-----
1 file changed, 59 insertions(+), 10 deletions(-)
diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
index 22bf553ccf9d..7bb4ce281050 100644
--- a/drivers/char/tpm/tpm_ftpm_tee.c
+++ b/drivers/char/tpm/tpm_ftpm_tee.c
@@ -214,11 +214,10 @@ static int ftpm_tee_match(struct tee_ioctl_version_data *ver, const void *data)
* Return:
* On success, 0. On failure, -errno.
*/
-static int ftpm_tee_probe(struct platform_device *pdev)
+static int ftpm_tee_probe(struct device *dev)
{
int rc;
struct tpm_chip *chip;
- struct device *dev = &pdev->dev;
struct ftpm_tee_private *pvt_data = NULL;
struct tee_ioctl_open_session_arg sess_arg;
@@ -297,6 +296,13 @@ static int ftpm_tee_probe(struct platform_device *pdev)
return rc;
}
+static int ftpm_plat_tee_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ return ftpm_tee_probe(dev);
+}
+
/**
* ftpm_tee_remove() - remove the TPM device
* @pdev: the platform_device description.
@@ -304,9 +310,9 @@ static int ftpm_tee_probe(struct platform_device *pdev)
* Return:
* 0 always.
*/
-static int ftpm_tee_remove(struct platform_device *pdev)
+static int ftpm_tee_remove(struct device *dev)
{
- struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
+ struct ftpm_tee_private *pvt_data = dev_get_drvdata(dev);
/* Release the chip */
tpm_chip_unregister(pvt_data->chip);
@@ -328,11 +334,18 @@ static int ftpm_tee_remove(struct platform_device *pdev)
return 0;
}
+static int ftpm_plat_tee_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ return ftpm_tee_remove(dev);
+}
+
/**
* ftpm_tee_shutdown() - shutdown the TPM device
* @pdev: the platform_device description.
*/
-static void ftpm_tee_shutdown(struct platform_device *pdev)
+static void ftpm_plat_tee_shutdown(struct platform_device *pdev)
{
struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
@@ -347,17 +360,53 @@ static const struct of_device_id of_ftpm_tee_ids[] = {
};
MODULE_DEVICE_TABLE(of, of_ftpm_tee_ids);
-static struct platform_driver ftpm_tee_driver = {
+static struct platform_driver ftpm_tee_plat_driver = {
.driver = {
.name = "ftpm-tee",
.of_match_table = of_match_ptr(of_ftpm_tee_ids),
},
- .probe = ftpm_tee_probe,
- .remove = ftpm_tee_remove,
- .shutdown = ftpm_tee_shutdown,
+ .shutdown = ftpm_plat_tee_shutdown,
+ .probe = ftpm_plat_tee_probe,
+ .remove = ftpm_plat_tee_remove,
+};
+
+static const struct tee_client_device_id optee_ftpm_id_table[] = {
+ {UUID_INIT(0xbc50d971, 0xd4c9, 0x42c4,
+ 0x82, 0xcb, 0x34, 0x3f, 0xb7, 0xf3, 0x78, 0x96)},
+ {}
};
-module_platform_driver(ftpm_tee_driver);
+MODULE_DEVICE_TABLE(tee, optee_ftpm_id_table);
+
+static struct tee_client_driver ftpm_tee_driver = {
+ .id_table = optee_ftpm_id_table,
+ .driver = {
+ .name = "optee-ftpm",
+ .bus = &tee_bus_type,
+ .probe = ftpm_tee_probe,
+ .remove = ftpm_tee_remove,
+ },
+};
+
+static int __init ftpm_mod_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&ftpm_tee_plat_driver);
+ if (rc)
+ return rc;
+
+ return driver_register(&ftpm_tee_driver.driver);
+}
+
+static void __exit ftpm_mod_exit(void)
+{
+ platform_driver_unregister(&ftpm_tee_plat_driver);
+ driver_unregister(&ftpm_tee_driver.driver);
+}
+
+module_init(ftpm_mod_init);
+module_exit(ftpm_mod_exit);
MODULE_AUTHOR("Thirupathaiah Annapureddy <[email protected]>");
MODULE_DESCRIPTION("TPM Driver for fTPM TA in TEE");
--
2.17.1
Hi Maxim,
On Thu, 21 May 2020 at 12:17, Maxim Uvarov <[email protected]> wrote:
>
> Some drivers (like ftpm) can operate only after tee-supplicant
> runs becase of tee-supplicant provides things like storage
> services. This patch splits probe of non tee-supplicant dependable
> drivers to early stage, and after tee-supplicant run probe other
> drivers.
>
> Signed-off-by: Maxim Uvarov <[email protected]>
> Suggested-by: Sumit Garg <[email protected]>
> Suggested-by: Arnd Bergmann <[email protected]>
> ---
> drivers/tee/optee/core.c | 25 ++++++++++++++++++++++---
> drivers/tee/optee/device.c | 17 +++++++++++------
> drivers/tee/optee/optee_private.h | 8 +++++++-
> 3 files changed, 40 insertions(+), 10 deletions(-)
>
This patch still doesn't seem to address the issue (duplicate devices
leading to sysfs registration failure) that was pointed during OP-TEE
patch review [1].
You could reproduce it simply with one TA having TA_FLAG_DEVICE_ENUM
flag and other TA having TA_FLAG_DEVICE_ENUM_SUPP flag.
[1] https://github.com/OP-TEE/optee_os/pull/3840#discussion_r425144487
-Sumit
> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> index 99698b8a3a74..dd2265c44907 100644
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -17,6 +17,7 @@
> #include <linux/tee_drv.h>
> #include <linux/types.h>
> #include <linux/uaccess.h>
> +#include <linux/workqueue.h>
> #include "optee_private.h"
> #include "optee_smc.h"
> #include "shm_pool.h"
> @@ -218,6 +219,15 @@ static void optee_get_version(struct tee_device *teedev,
> *vers = v;
> }
>
> +static void optee_bus_scan(struct work_struct *work)
> +{
> + int rc;
> +
> + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP);
> + if (rc)
> + pr_err("optee_enumerate_devices failed %d\n", rc);
> +}
> +
> static int optee_open(struct tee_context *ctx)
> {
> struct optee_context_data *ctxdata;
> @@ -241,8 +251,15 @@ static int optee_open(struct tee_context *ctx)
> kfree(ctxdata);
> return -EBUSY;
> }
> - }
>
> + INIT_WORK(&optee->scan_bus_work, optee_bus_scan);
> + optee->scan_bus_wq = create_workqueue("optee_bus_scan");
> + if (!optee->scan_bus_wq) {
> + pr_err("optee: couldn't create workqueue\n");
> + return -ECHILD;
> + }
> + queue_work(optee->scan_bus_wq, &optee->scan_bus_work);
> + }
> mutex_init(&ctxdata->mutex);
> INIT_LIST_HEAD(&ctxdata->sess_list);
>
> @@ -296,8 +313,10 @@ static void optee_release(struct tee_context *ctx)
>
> ctx->data = NULL;
>
> - if (teedev == optee->supp_teedev)
> + if (teedev == optee->supp_teedev) {
> + destroy_workqueue(optee->scan_bus_wq);
> optee_supp_release(&optee->supp);
> + }
> }
>
> static const struct tee_driver_ops optee_ops = {
> @@ -675,7 +694,7 @@ static int optee_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, optee);
>
> - rc = optee_enumerate_devices();
> + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES);
> if (rc) {
> optee_remove(pdev);
> return rc;
> diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> index e3a148521ec1..d4931dad07aa 100644
> --- a/drivers/tee/optee/device.c
> +++ b/drivers/tee/optee/device.c
> @@ -21,7 +21,6 @@
> * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
> */
> -#define PTA_CMD_GET_DEVICES 0x0
>
> static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> {
> @@ -32,7 +31,8 @@ static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> }
>
> static int get_devices(struct tee_context *ctx, u32 session,
> - struct tee_shm *device_shm, u32 *shm_size)
> + struct tee_shm *device_shm, u32 *shm_size,
> + u32 func)
> {
> int ret = 0;
> struct tee_ioctl_invoke_arg inv_arg;
> @@ -42,7 +42,7 @@ static int get_devices(struct tee_context *ctx, u32 session,
> memset(¶m, 0, sizeof(param));
>
> /* Invoke PTA_CMD_GET_DEVICES function */
> - inv_arg.func = PTA_CMD_GET_DEVICES;
> + inv_arg.func = func;
> inv_arg.session = session;
> inv_arg.num_params = 4;
>
> @@ -87,7 +87,7 @@ static int optee_register_device(const uuid_t *device_uuid, u32 device_id)
> return rc;
> }
>
> -int optee_enumerate_devices(void)
> +static int __optee_enumerate_devices(u32 func)
> {
> const uuid_t pta_uuid =
> UUID_INIT(0x7011a688, 0xddde, 0x4053,
> @@ -118,7 +118,7 @@ int optee_enumerate_devices(void)
> goto out_ctx;
> }
>
> - rc = get_devices(ctx, sess_arg.session, NULL, &shm_size);
> + rc = get_devices(ctx, sess_arg.session, NULL, &shm_size, func);
> if (rc < 0 || !shm_size)
> goto out_sess;
>
> @@ -130,7 +130,7 @@ int optee_enumerate_devices(void)
> goto out_sess;
> }
>
> - rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size, func);
> if (rc < 0)
> goto out_shm;
>
> @@ -158,3 +158,8 @@ int optee_enumerate_devices(void)
>
> return rc;
> }
> +
> +int optee_enumerate_devices(u32 func)
> +{
> + return __optee_enumerate_devices(func);
> +}
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index d9c5037b4e03..6cdac4bb7253 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -78,6 +78,8 @@ struct optee_supp {
> * @memremaped_shm virtual address of memory in shared memory pool
> * @sec_caps: secure world capabilities defined by
> * OPTEE_SMC_SEC_CAP_* in optee_smc.h
> + * @scan_bus_wq workqueue to scan optee bus and register optee drivers
> + * @scan_bus_work workq to scan optee bus and register optee drivers
> */
> struct optee {
> struct tee_device *supp_teedev;
> @@ -89,6 +91,8 @@ struct optee {
> struct tee_shm_pool *pool;
> void *memremaped_shm;
> u32 sec_caps;
> + struct workqueue_struct *scan_bus_wq;
> + struct work_struct scan_bus_work;
> };
>
> struct optee_session {
> @@ -173,7 +177,9 @@ void optee_free_pages_list(void *array, size_t num_entries);
> void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
> size_t page_offset);
>
> -int optee_enumerate_devices(void);
> +#define PTA_CMD_GET_DEVICES 0x0
> +#define PTA_CMD_GET_DEVICES_SUPP 0x1
> +int optee_enumerate_devices(u32 func);
>
> /*
> * Small helpers
> --
> 2.17.1
>
On Fri, 22 May 2020 at 14:40, Sumit Garg <[email protected]> wrote:
>
> Hi Maxim,
>
> On Thu, 21 May 2020 at 12:17, Maxim Uvarov <[email protected]> wrote:
> >
> > Some drivers (like ftpm) can operate only after tee-supplicant
> > runs becase of tee-supplicant provides things like storage
> > services. This patch splits probe of non tee-supplicant dependable
> > drivers to early stage, and after tee-supplicant run probe other
> > drivers.
> >
> > Signed-off-by: Maxim Uvarov <[email protected]>
> > Suggested-by: Sumit Garg <[email protected]>
> > Suggested-by: Arnd Bergmann <[email protected]>
> > ---
> > drivers/tee/optee/core.c | 25 ++++++++++++++++++++++---
> > drivers/tee/optee/device.c | 17 +++++++++++------
> > drivers/tee/optee/optee_private.h | 8 +++++++-
> > 3 files changed, 40 insertions(+), 10 deletions(-)
> >
>
> This patch still doesn't seem to address the issue (duplicate devices
> leading to sysfs registration failure) that was pointed during OP-TEE
> patch review [1].
>
> You could reproduce it simply with one TA having TA_FLAG_DEVICE_ENUM
> flag and other TA having TA_FLAG_DEVICE_ENUM_SUPP flag.
>
> [1] https://github.com/OP-TEE/optee_os/pull/3840#discussion_r425144487
>
> -Sumit
Ah, yes. I will send an updated version.
Maxim.
>
> > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > index 99698b8a3a74..dd2265c44907 100644
> > --- a/drivers/tee/optee/core.c
> > +++ b/drivers/tee/optee/core.c
> > @@ -17,6 +17,7 @@
> > #include <linux/tee_drv.h>
> > #include <linux/types.h>
> > #include <linux/uaccess.h>
> > +#include <linux/workqueue.h>
> > #include "optee_private.h"
> > #include "optee_smc.h"
> > #include "shm_pool.h"
> > @@ -218,6 +219,15 @@ static void optee_get_version(struct tee_device *teedev,
> > *vers = v;
> > }
> >
> > +static void optee_bus_scan(struct work_struct *work)
> > +{
> > + int rc;
> > +
> > + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP);
> > + if (rc)
> > + pr_err("optee_enumerate_devices failed %d\n", rc);
> > +}
> > +
> > static int optee_open(struct tee_context *ctx)
> > {
> > struct optee_context_data *ctxdata;
> > @@ -241,8 +251,15 @@ static int optee_open(struct tee_context *ctx)
> > kfree(ctxdata);
> > return -EBUSY;
> > }
> > - }
> >
> > + INIT_WORK(&optee->scan_bus_work, optee_bus_scan);
> > + optee->scan_bus_wq = create_workqueue("optee_bus_scan");
> > + if (!optee->scan_bus_wq) {
> > + pr_err("optee: couldn't create workqueue\n");
> > + return -ECHILD;
> > + }
> > + queue_work(optee->scan_bus_wq, &optee->scan_bus_work);
> > + }
> > mutex_init(&ctxdata->mutex);
> > INIT_LIST_HEAD(&ctxdata->sess_list);
> >
> > @@ -296,8 +313,10 @@ static void optee_release(struct tee_context *ctx)
> >
> > ctx->data = NULL;
> >
> > - if (teedev == optee->supp_teedev)
> > + if (teedev == optee->supp_teedev) {
> > + destroy_workqueue(optee->scan_bus_wq);
> > optee_supp_release(&optee->supp);
> > + }
> > }
> >
> > static const struct tee_driver_ops optee_ops = {
> > @@ -675,7 +694,7 @@ static int optee_probe(struct platform_device *pdev)
> >
> > platform_set_drvdata(pdev, optee);
> >
> > - rc = optee_enumerate_devices();
> > + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES);
> > if (rc) {
> > optee_remove(pdev);
> > return rc;
> > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> > index e3a148521ec1..d4931dad07aa 100644
> > --- a/drivers/tee/optee/device.c
> > +++ b/drivers/tee/optee/device.c
> > @@ -21,7 +21,6 @@
> > * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
> > */
> > -#define PTA_CMD_GET_DEVICES 0x0
> >
> > static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> > {
> > @@ -32,7 +31,8 @@ static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> > }
> >
> > static int get_devices(struct tee_context *ctx, u32 session,
> > - struct tee_shm *device_shm, u32 *shm_size)
> > + struct tee_shm *device_shm, u32 *shm_size,
> > + u32 func)
> > {
> > int ret = 0;
> > struct tee_ioctl_invoke_arg inv_arg;
> > @@ -42,7 +42,7 @@ static int get_devices(struct tee_context *ctx, u32 session,
> > memset(¶m, 0, sizeof(param));
> >
> > /* Invoke PTA_CMD_GET_DEVICES function */
> > - inv_arg.func = PTA_CMD_GET_DEVICES;
> > + inv_arg.func = func;
> > inv_arg.session = session;
> > inv_arg.num_params = 4;
> >
> > @@ -87,7 +87,7 @@ static int optee_register_device(const uuid_t *device_uuid, u32 device_id)
> > return rc;
> > }
> >
> > -int optee_enumerate_devices(void)
> > +static int __optee_enumerate_devices(u32 func)
> > {
> > const uuid_t pta_uuid =
> > UUID_INIT(0x7011a688, 0xddde, 0x4053,
> > @@ -118,7 +118,7 @@ int optee_enumerate_devices(void)
> > goto out_ctx;
> > }
> >
> > - rc = get_devices(ctx, sess_arg.session, NULL, &shm_size);
> > + rc = get_devices(ctx, sess_arg.session, NULL, &shm_size, func);
> > if (rc < 0 || !shm_size)
> > goto out_sess;
> >
> > @@ -130,7 +130,7 @@ int optee_enumerate_devices(void)
> > goto out_sess;
> > }
> >
> > - rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> > + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size, func);
> > if (rc < 0)
> > goto out_shm;
> >
> > @@ -158,3 +158,8 @@ int optee_enumerate_devices(void)
> >
> > return rc;
> > }
> > +
> > +int optee_enumerate_devices(u32 func)
> > +{
> > + return __optee_enumerate_devices(func);
> > +}
> > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > index d9c5037b4e03..6cdac4bb7253 100644
> > --- a/drivers/tee/optee/optee_private.h
> > +++ b/drivers/tee/optee/optee_private.h
> > @@ -78,6 +78,8 @@ struct optee_supp {
> > * @memremaped_shm virtual address of memory in shared memory pool
> > * @sec_caps: secure world capabilities defined by
> > * OPTEE_SMC_SEC_CAP_* in optee_smc.h
> > + * @scan_bus_wq workqueue to scan optee bus and register optee drivers
> > + * @scan_bus_work workq to scan optee bus and register optee drivers
> > */
> > struct optee {
> > struct tee_device *supp_teedev;
> > @@ -89,6 +91,8 @@ struct optee {
> > struct tee_shm_pool *pool;
> > void *memremaped_shm;
> > u32 sec_caps;
> > + struct workqueue_struct *scan_bus_wq;
> > + struct work_struct scan_bus_work;
> > };
> >
> > struct optee_session {
> > @@ -173,7 +177,9 @@ void optee_free_pages_list(void *array, size_t num_entries);
> > void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
> > size_t page_offset);
> >
> > -int optee_enumerate_devices(void);
> > +#define PTA_CMD_GET_DEVICES 0x0
> > +#define PTA_CMD_GET_DEVICES_SUPP 0x1
> > +int optee_enumerate_devices(u32 func);
> >
> > /*
> > * Small helpers
> > --
> > 2.17.1
> >
On Thu, May 21, 2020 at 09:47:43AM +0300, Maxim Uvarov wrote:
> Register driver on TEE bus. module tee registers bus,
"on the TEE bus"
"The module tee"
> and module optee calls optee_enumerate_devices() to scan
> all devices on the bus. Trusted Application for this driver
Looking at drivers/tee, it shows that tee and optee are in fact the same
module as opposed to what your commit message says.
> can be Early TA's (can be compiled into optee-os). In that
> case it will be on OPTEE bus before linux booting. Also
> optee-suplicant application is needed to be loaded between
> OPTEE module and ftpm module to maintain functionality
> for fTPM driver.
Why is this needed and why things worked before having this?
> Signed-off-by: Maxim Uvarov <[email protected]>
> Suggested-by: Sumit Garg <[email protected]>
> Suggested-by: Arnd Bergmann <[email protected]>
> ---
> drivers/char/tpm/tpm_ftpm_tee.c | 69 ++++++++++++++++++++++++++++-----
> 1 file changed, 59 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
> index 22bf553ccf9d..7bb4ce281050 100644
> --- a/drivers/char/tpm/tpm_ftpm_tee.c
> +++ b/drivers/char/tpm/tpm_ftpm_tee.c
> @@ -214,11 +214,10 @@ static int ftpm_tee_match(struct tee_ioctl_version_data *ver, const void *data)
> * Return:
> * On success, 0. On failure, -errno.
> */
> -static int ftpm_tee_probe(struct platform_device *pdev)
> +static int ftpm_tee_probe(struct device *dev)
> {
> int rc;
> struct tpm_chip *chip;
> - struct device *dev = &pdev->dev;
> struct ftpm_tee_private *pvt_data = NULL;
> struct tee_ioctl_open_session_arg sess_arg;
>
> @@ -297,6 +296,13 @@ static int ftpm_tee_probe(struct platform_device *pdev)
> return rc;
> }
>
> +static int ftpm_plat_tee_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> +
> + return ftpm_tee_probe(dev);
> +}
> +
> /**
> * ftpm_tee_remove() - remove the TPM device
> * @pdev: the platform_device description.
> @@ -304,9 +310,9 @@ static int ftpm_tee_probe(struct platform_device *pdev)
> * Return:
> * 0 always.
> */
> -static int ftpm_tee_remove(struct platform_device *pdev)
> +static int ftpm_tee_remove(struct device *dev)
> {
> - struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
> + struct ftpm_tee_private *pvt_data = dev_get_drvdata(dev);
>
> /* Release the chip */
> tpm_chip_unregister(pvt_data->chip);
> @@ -328,11 +334,18 @@ static int ftpm_tee_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int ftpm_plat_tee_remove(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> +
> + return ftpm_tee_remove(dev);
> +}
> +
> /**
> * ftpm_tee_shutdown() - shutdown the TPM device
> * @pdev: the platform_device description.
> */
> -static void ftpm_tee_shutdown(struct platform_device *pdev)
> +static void ftpm_plat_tee_shutdown(struct platform_device *pdev)
> {
> struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
>
> @@ -347,17 +360,53 @@ static const struct of_device_id of_ftpm_tee_ids[] = {
> };
> MODULE_DEVICE_TABLE(of, of_ftpm_tee_ids);
>
> -static struct platform_driver ftpm_tee_driver = {
> +static struct platform_driver ftpm_tee_plat_driver = {
> .driver = {
> .name = "ftpm-tee",
> .of_match_table = of_match_ptr(of_ftpm_tee_ids),
> },
> - .probe = ftpm_tee_probe,
> - .remove = ftpm_tee_remove,
> - .shutdown = ftpm_tee_shutdown,
> + .shutdown = ftpm_plat_tee_shutdown,
> + .probe = ftpm_plat_tee_probe,
> + .remove = ftpm_plat_tee_remove,
> +};
> +
> +static const struct tee_client_device_id optee_ftpm_id_table[] = {
> + {UUID_INIT(0xbc50d971, 0xd4c9, 0x42c4,
> + 0x82, 0xcb, 0x34, 0x3f, 0xb7, 0xf3, 0x78, 0x96)},
> + {}
Please put a comment describing what this is.
> };
>
> -module_platform_driver(ftpm_tee_driver);
> +MODULE_DEVICE_TABLE(tee, optee_ftpm_id_table);
> +
> +static struct tee_client_driver ftpm_tee_driver = {
> + .id_table = optee_ftpm_id_table,
> + .driver = {
> + .name = "optee-ftpm",
> + .bus = &tee_bus_type,
> + .probe = ftpm_tee_probe,
> + .remove = ftpm_tee_remove,
> + },
> +};
> +
> +static int __init ftpm_mod_init(void)
> +{
> + int rc;
> +
> + rc = platform_driver_register(&ftpm_tee_plat_driver);
> + if (rc)
> + return rc;
> +
> + return driver_register(&ftpm_tee_driver.driver);
> +}
> +
> +static void __exit ftpm_mod_exit(void)
> +{
> + platform_driver_unregister(&ftpm_tee_plat_driver);
> + driver_unregister(&ftpm_tee_driver.driver);
> +}
> +
> +module_init(ftpm_mod_init);
> +module_exit(ftpm_mod_exit);
>
> MODULE_AUTHOR("Thirupathaiah Annapureddy <[email protected]>");
> MODULE_DESCRIPTION("TPM Driver for fTPM TA in TEE");
> --
> 2.17.1
>
Wondering if MODULE_AUTHOR() is still equired given that the GIT log
has objectively better log of authorship.
/Jarkko
On Fri, 22 May 2020 at 20:15, Jarkko Sakkinen
<[email protected]> wrote:
>
> On Thu, May 21, 2020 at 09:47:43AM +0300, Maxim Uvarov wrote:
> > Register driver on TEE bus. module tee registers bus,
>
> "on the TEE bus"
>
> "The module tee"
>
> > and module optee calls optee_enumerate_devices() to scan
> > all devices on the bus. Trusted Application for this driver
>
> Looking at drivers/tee, it shows that tee and optee are in fact the same
> module as opposed to what your commit message says.
>
In the current kernel it's 2 different modules.
> > can be Early TA's (can be compiled into optee-os). In that
> > case it will be on OPTEE bus before linux booting. Also
> > optee-suplicant application is needed to be loaded between
> > OPTEE module and ftpm module to maintain functionality
> > for fTPM driver.
>
> Why is this needed and why things worked before having this?
>
Before these changes user space has to drive boot sequence. I.e. tee
and optee modules loads, then application tee-supplicant has to start
and only then module ftpm can be loaded. The reason for that is
storage services are implemented in userspace and driver needs them.
To make it work needed some tricky systemd scenario with black list
driver mode. That really did not look well. From the over side ftpm
might be used by uboot so it can be compiled inside firmware
(bl32/optee-os). On the other hand there are drivers like tee-rng
which do not need tee-supplicant and can run immediately after tee and
optee modules. So the solution as I described in the commit is to make
tee bus work for both types of drivers.
Also in this driver I specially did not remove the old way of
registration using DT entry. To not break existence things. And added
new registration from the platform driver.
> > Signed-off-by: Maxim Uvarov <[email protected]>
> > Suggested-by: Sumit Garg <[email protected]>
> > Suggested-by: Arnd Bergmann <[email protected]>
> > ---
> > drivers/char/tpm/tpm_ftpm_tee.c | 69 ++++++++++++++++++++++++++++-----
> > 1 file changed, 59 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_ftpm_tee.c b/drivers/char/tpm/tpm_ftpm_tee.c
> > index 22bf553ccf9d..7bb4ce281050 100644
> > --- a/drivers/char/tpm/tpm_ftpm_tee.c
> > +++ b/drivers/char/tpm/tpm_ftpm_tee.c
> > @@ -214,11 +214,10 @@ static int ftpm_tee_match(struct tee_ioctl_version_data *ver, const void *data)
> > * Return:
> > * On success, 0. On failure, -errno.
> > */
> > -static int ftpm_tee_probe(struct platform_device *pdev)
> > +static int ftpm_tee_probe(struct device *dev)
> > {
> > int rc;
> > struct tpm_chip *chip;
> > - struct device *dev = &pdev->dev;
> > struct ftpm_tee_private *pvt_data = NULL;
> > struct tee_ioctl_open_session_arg sess_arg;
> >
> > @@ -297,6 +296,13 @@ static int ftpm_tee_probe(struct platform_device *pdev)
> > return rc;
> > }
> >
> > +static int ftpm_plat_tee_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > +
> > + return ftpm_tee_probe(dev);
> > +}
> > +
> > /**
> > * ftpm_tee_remove() - remove the TPM device
> > * @pdev: the platform_device description.
> > @@ -304,9 +310,9 @@ static int ftpm_tee_probe(struct platform_device *pdev)
> > * Return:
> > * 0 always.
> > */
> > -static int ftpm_tee_remove(struct platform_device *pdev)
> > +static int ftpm_tee_remove(struct device *dev)
> > {
> > - struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
> > + struct ftpm_tee_private *pvt_data = dev_get_drvdata(dev);
> >
> > /* Release the chip */
> > tpm_chip_unregister(pvt_data->chip);
> > @@ -328,11 +334,18 @@ static int ftpm_tee_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static int ftpm_plat_tee_remove(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > +
> > + return ftpm_tee_remove(dev);
> > +}
> > +
> > /**
> > * ftpm_tee_shutdown() - shutdown the TPM device
> > * @pdev: the platform_device description.
> > */
> > -static void ftpm_tee_shutdown(struct platform_device *pdev)
> > +static void ftpm_plat_tee_shutdown(struct platform_device *pdev)
> > {
> > struct ftpm_tee_private *pvt_data = dev_get_drvdata(&pdev->dev);
> >
> > @@ -347,17 +360,53 @@ static const struct of_device_id of_ftpm_tee_ids[] = {
> > };
> > MODULE_DEVICE_TABLE(of, of_ftpm_tee_ids);
> >
> > -static struct platform_driver ftpm_tee_driver = {
> > +static struct platform_driver ftpm_tee_plat_driver = {
> > .driver = {
> > .name = "ftpm-tee",
> > .of_match_table = of_match_ptr(of_ftpm_tee_ids),
> > },
> > - .probe = ftpm_tee_probe,
> > - .remove = ftpm_tee_remove,
> > - .shutdown = ftpm_tee_shutdown,
> > + .shutdown = ftpm_plat_tee_shutdown,
> > + .probe = ftpm_plat_tee_probe,
> > + .remove = ftpm_plat_tee_remove,
> > +};
> > +
> > +static const struct tee_client_device_id optee_ftpm_id_table[] = {
> > + {UUID_INIT(0xbc50d971, 0xd4c9, 0x42c4,
> > + 0x82, 0xcb, 0x34, 0x3f, 0xb7, 0xf3, 0x78, 0x96)},
> > + {}
>
> Please put a comment describing what this is.
>
> > };
> >
> > -module_platform_driver(ftpm_tee_driver);
> > +MODULE_DEVICE_TABLE(tee, optee_ftpm_id_table);
> > +
> > +static struct tee_client_driver ftpm_tee_driver = {
> > + .id_table = optee_ftpm_id_table,
> > + .driver = {
> > + .name = "optee-ftpm",
> > + .bus = &tee_bus_type,
> > + .probe = ftpm_tee_probe,
> > + .remove = ftpm_tee_remove,
> > + },
> > +};
> > +
> > +static int __init ftpm_mod_init(void)
> > +{
> > + int rc;
> > +
> > + rc = platform_driver_register(&ftpm_tee_plat_driver);
> > + if (rc)
> > + return rc;
> > +
> > + return driver_register(&ftpm_tee_driver.driver);
> > +}
> > +
> > +static void __exit ftpm_mod_exit(void)
> > +{
> > + platform_driver_unregister(&ftpm_tee_plat_driver);
> > + driver_unregister(&ftpm_tee_driver.driver);
> > +}
> > +
> > +module_init(ftpm_mod_init);
> > +module_exit(ftpm_mod_exit);
> >
> > MODULE_AUTHOR("Thirupathaiah Annapureddy <[email protected]>");
> > MODULE_DESCRIPTION("TPM Driver for fTPM TA in TEE");
> > --
> > 2.17.1
> >
>
> Wondering if MODULE_AUTHOR() is still equired given that the GIT log
> has objectively better log of authorship.
>
> /Jarkko
Yea, but I prefer to not touch such lines. It's up to maintainers how
they support the driver.
Best regards,
Maxim.
On Fri, May 22, 2020 at 10:29:44PM +0300, Maxim Uvarov wrote:
> On Fri, 22 May 2020 at 20:15, Jarkko Sakkinen
> <[email protected]> wrote:
> >
> > On Thu, May 21, 2020 at 09:47:43AM +0300, Maxim Uvarov wrote:
> > > Register driver on TEE bus. module tee registers bus,
> >
> > "on the TEE bus"
> >
> > "The module tee"
> >
> > > and module optee calls optee_enumerate_devices() to scan
> > > all devices on the bus. Trusted Application for this driver
> >
> > Looking at drivers/tee, it shows that tee and optee are in fact the same
> > module as opposed to what your commit message says.
> >
>
> In the current kernel it's 2 different modules.
>
> > > can be Early TA's (can be compiled into optee-os). In that
> > > case it will be on OPTEE bus before linux booting. Also
> > > optee-suplicant application is needed to be loaded between
> > > OPTEE module and ftpm module to maintain functionality
> > > for fTPM driver.
> >
> > Why is this needed and why things worked before having this?
> >
>
> Before these changes user space has to drive boot sequence. I.e. tee
> and optee modules loads, then application tee-supplicant has to start
> and only then module ftpm can be loaded. The reason for that is
> storage services are implemented in userspace and driver needs them.
Is the TPM implementation uploaded to TEE from user space and or what
storage are we talking about? Not sure how these storage services
connect to the TPM.
/Jarkko
Hi Maxim,
On Thu, May 21, 2020 at 8:47 AM Maxim Uvarov <[email protected]> wrote:
>
> Some drivers (like ftpm) can operate only after tee-supplicant
> runs becase of tee-supplicant provides things like storage
> services. This patch splits probe of non tee-supplicant dependable
> drivers to early stage, and after tee-supplicant run probe other
> drivers.
>
> Signed-off-by: Maxim Uvarov <[email protected]>
> Suggested-by: Sumit Garg <[email protected]>
> Suggested-by: Arnd Bergmann <[email protected]>
> ---
> drivers/tee/optee/core.c | 25 ++++++++++++++++++++++---
> drivers/tee/optee/device.c | 17 +++++++++++------
> drivers/tee/optee/optee_private.h | 8 +++++++-
> 3 files changed, 40 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> index 99698b8a3a74..dd2265c44907 100644
> --- a/drivers/tee/optee/core.c
> +++ b/drivers/tee/optee/core.c
> @@ -17,6 +17,7 @@
> #include <linux/tee_drv.h>
> #include <linux/types.h>
> #include <linux/uaccess.h>
> +#include <linux/workqueue.h>
> #include "optee_private.h"
> #include "optee_smc.h"
> #include "shm_pool.h"
> @@ -218,6 +219,15 @@ static void optee_get_version(struct tee_device *teedev,
> *vers = v;
> }
>
> +static void optee_bus_scan(struct work_struct *work)
> +{
> + int rc;
> +
> + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP);
> + if (rc)
> + pr_err("optee_enumerate_devices failed %d\n", rc);
> +}
> +
> static int optee_open(struct tee_context *ctx)
> {
> struct optee_context_data *ctxdata;
> @@ -241,8 +251,15 @@ static int optee_open(struct tee_context *ctx)
> kfree(ctxdata);
> return -EBUSY;
> }
> - }
>
> + INIT_WORK(&optee->scan_bus_work, optee_bus_scan);
> + optee->scan_bus_wq = create_workqueue("optee_bus_scan");
> + if (!optee->scan_bus_wq) {
> + pr_err("optee: couldn't create workqueue\n");
> + return -ECHILD;
> + }
> + queue_work(optee->scan_bus_wq, &optee->scan_bus_work);
Shouldn't this be done only the first time tee-supplicant opens the
device? Normally tee-supplicant only does this once, but it might get
restarted for some reason.
> + }
> mutex_init(&ctxdata->mutex);
> INIT_LIST_HEAD(&ctxdata->sess_list);
>
> @@ -296,8 +313,10 @@ static void optee_release(struct tee_context *ctx)
>
> ctx->data = NULL;
>
> - if (teedev == optee->supp_teedev)
> + if (teedev == optee->supp_teedev) {
> + destroy_workqueue(optee->scan_bus_wq);
> optee_supp_release(&optee->supp);
> + }
> }
>
> static const struct tee_driver_ops optee_ops = {
> @@ -675,7 +694,7 @@ static int optee_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, optee);
>
> - rc = optee_enumerate_devices();
> + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES);
> if (rc) {
> optee_remove(pdev);
> return rc;
> diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> index e3a148521ec1..d4931dad07aa 100644
> --- a/drivers/tee/optee/device.c
> +++ b/drivers/tee/optee/device.c
> @@ -21,7 +21,6 @@
> * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
> */
> -#define PTA_CMD_GET_DEVICES 0x0
>
> static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> {
> @@ -32,7 +31,8 @@ static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> }
>
> static int get_devices(struct tee_context *ctx, u32 session,
> - struct tee_shm *device_shm, u32 *shm_size)
> + struct tee_shm *device_shm, u32 *shm_size,
> + u32 func)
> {
> int ret = 0;
> struct tee_ioctl_invoke_arg inv_arg;
> @@ -42,7 +42,7 @@ static int get_devices(struct tee_context *ctx, u32 session,
> memset(¶m, 0, sizeof(param));
>
> /* Invoke PTA_CMD_GET_DEVICES function */
> - inv_arg.func = PTA_CMD_GET_DEVICES;
> + inv_arg.func = func;
> inv_arg.session = session;
> inv_arg.num_params = 4;
>
> @@ -87,7 +87,7 @@ static int optee_register_device(const uuid_t *device_uuid, u32 device_id)
> return rc;
> }
>
> -int optee_enumerate_devices(void)
> +static int __optee_enumerate_devices(u32 func)
> {
> const uuid_t pta_uuid =
> UUID_INIT(0x7011a688, 0xddde, 0x4053,
> @@ -118,7 +118,7 @@ int optee_enumerate_devices(void)
> goto out_ctx;
> }
>
> - rc = get_devices(ctx, sess_arg.session, NULL, &shm_size);
> + rc = get_devices(ctx, sess_arg.session, NULL, &shm_size, func);
> if (rc < 0 || !shm_size)
> goto out_sess;
>
> @@ -130,7 +130,7 @@ int optee_enumerate_devices(void)
> goto out_sess;
> }
>
> - rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size, func);
> if (rc < 0)
> goto out_shm;
>
> @@ -158,3 +158,8 @@ int optee_enumerate_devices(void)
>
> return rc;
> }
> +
> +int optee_enumerate_devices(u32 func)
> +{
> + return __optee_enumerate_devices(func);
> +}
> diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> index d9c5037b4e03..6cdac4bb7253 100644
> --- a/drivers/tee/optee/optee_private.h
> +++ b/drivers/tee/optee/optee_private.h
> @@ -78,6 +78,8 @@ struct optee_supp {
> * @memremaped_shm virtual address of memory in shared memory pool
> * @sec_caps: secure world capabilities defined by
> * OPTEE_SMC_SEC_CAP_* in optee_smc.h
> + * @scan_bus_wq workqueue to scan optee bus and register optee drivers
> + * @scan_bus_work workq to scan optee bus and register optee drivers
> */
> struct optee {
> struct tee_device *supp_teedev;
> @@ -89,6 +91,8 @@ struct optee {
> struct tee_shm_pool *pool;
> void *memremaped_shm;
> u32 sec_caps;
> + struct workqueue_struct *scan_bus_wq;
> + struct work_struct scan_bus_work;
> };
>
> struct optee_session {
> @@ -173,7 +177,9 @@ void optee_free_pages_list(void *array, size_t num_entries);
> void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
> size_t page_offset);
>
> -int optee_enumerate_devices(void);
> +#define PTA_CMD_GET_DEVICES 0x0
> +#define PTA_CMD_GET_DEVICES_SUPP 0x1
> +int optee_enumerate_devices(u32 func);
>
> /*
> * Small helpers
> --
> 2.17.1
>
On Fri, 22 May 2020 at 23:03, Jarkko Sakkinen
<[email protected]> wrote:
>
> On Fri, May 22, 2020 at 10:29:44PM +0300, Maxim Uvarov wrote:
> > On Fri, 22 May 2020 at 20:15, Jarkko Sakkinen
> > <[email protected]> wrote:
> > >
> > > On Thu, May 21, 2020 at 09:47:43AM +0300, Maxim Uvarov wrote:
> > > > Register driver on TEE bus. module tee registers bus,
> > >
> > > "on the TEE bus"
> > >
> > > "The module tee"
> > >
> > > > and module optee calls optee_enumerate_devices() to scan
> > > > all devices on the bus. Trusted Application for this driver
> > >
> > > Looking at drivers/tee, it shows that tee and optee are in fact the same
> > > module as opposed to what your commit message says.
> > >
> >
> > In the current kernel it's 2 different modules.
> >
> > > > can be Early TA's (can be compiled into optee-os). In that
> > > > case it will be on OPTEE bus before linux booting. Also
> > > > optee-suplicant application is needed to be loaded between
> > > > OPTEE module and ftpm module to maintain functionality
> > > > for fTPM driver.
> > >
> > > Why is this needed and why things worked before having this?
> > >
> >
> > Before these changes user space has to drive boot sequence. I.e. tee
> > and optee modules loads, then application tee-supplicant has to start
> > and only then module ftpm can be loaded. The reason for that is
> > storage services are implemented in userspace and driver needs them.
>
> Is the TPM implementation uploaded to TEE from user space and or what
> storage are we talking about? Not sure how these storage services
> connect to the TPM.
>
> /Jarkko
Jakko,
tee-supplicant application provides state machine over callbacks with
RPC messages.
https://github.com/OP-TEE/optee_client/blob/master/tee-supplicant/src/tee_supplicant.c#L614
It also allocates shm. Without running tee-supplicant
tee_client_open_session() will fail.
optee_open_session()->get_msg_arg()->tee_shm_alloc()->...
Optee team wanted to remove some dependencies from tee-supplicant with
moving code
to the kernel. But for now I think that should be out of the scope of
current patches due to
they fix driver initialization on tee bus without breaking current
functionality.
Maxim.
On Sun, 24 May 2020 at 09:22, Jens Wiklander <[email protected]> wrote:
>
> Hi Maxim,
>
> On Thu, May 21, 2020 at 8:47 AM Maxim Uvarov <[email protected]> wrote:
> >
> > Some drivers (like ftpm) can operate only after tee-supplicant
> > runs becase of tee-supplicant provides things like storage
> > services. This patch splits probe of non tee-supplicant dependable
> > drivers to early stage, and after tee-supplicant run probe other
> > drivers.
> >
> > Signed-off-by: Maxim Uvarov <[email protected]>
> > Suggested-by: Sumit Garg <[email protected]>
> > Suggested-by: Arnd Bergmann <[email protected]>
> > ---
> > drivers/tee/optee/core.c | 25 ++++++++++++++++++++++---
> > drivers/tee/optee/device.c | 17 +++++++++++------
> > drivers/tee/optee/optee_private.h | 8 +++++++-
> > 3 files changed, 40 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > index 99698b8a3a74..dd2265c44907 100644
> > --- a/drivers/tee/optee/core.c
> > +++ b/drivers/tee/optee/core.c
> > @@ -17,6 +17,7 @@
> > #include <linux/tee_drv.h>
> > #include <linux/types.h>
> > #include <linux/uaccess.h>
> > +#include <linux/workqueue.h>
> > #include "optee_private.h"
> > #include "optee_smc.h"
> > #include "shm_pool.h"
> > @@ -218,6 +219,15 @@ static void optee_get_version(struct tee_device *teedev,
> > *vers = v;
> > }
> >
> > +static void optee_bus_scan(struct work_struct *work)
> > +{
> > + int rc;
> > +
> > + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP);
> > + if (rc)
> > + pr_err("optee_enumerate_devices failed %d\n", rc);
> > +}
> > +
> > static int optee_open(struct tee_context *ctx)
> > {
> > struct optee_context_data *ctxdata;
> > @@ -241,8 +251,15 @@ static int optee_open(struct tee_context *ctx)
> > kfree(ctxdata);
> > return -EBUSY;
> > }
> > - }
> >
> > + INIT_WORK(&optee->scan_bus_work, optee_bus_scan);
> > + optee->scan_bus_wq = create_workqueue("optee_bus_scan");
> > + if (!optee->scan_bus_wq) {
> > + pr_err("optee: couldn't create workqueue\n");
> > + return -ECHILD;
> > + }
> > + queue_work(optee->scan_bus_wq, &optee->scan_bus_work);
>
> Shouldn't this be done only the first time tee-supplicant opens the
> device? Normally tee-supplicant only does this once, but it might get
> restarted for some reason.
>
Yes, thanks. I will add this to the next version.
Maxim.
> > + }
> > mutex_init(&ctxdata->mutex);
> > INIT_LIST_HEAD(&ctxdata->sess_list);
> >
> > @@ -296,8 +313,10 @@ static void optee_release(struct tee_context *ctx)
> >
> > ctx->data = NULL;
> >
> > - if (teedev == optee->supp_teedev)
> > + if (teedev == optee->supp_teedev) {
> > + destroy_workqueue(optee->scan_bus_wq);
> > optee_supp_release(&optee->supp);
> > + }
> > }
> >
> > static const struct tee_driver_ops optee_ops = {
> > @@ -675,7 +694,7 @@ static int optee_probe(struct platform_device *pdev)
> >
> > platform_set_drvdata(pdev, optee);
> >
> > - rc = optee_enumerate_devices();
> > + rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES);
> > if (rc) {
> > optee_remove(pdev);
> > return rc;
> > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> > index e3a148521ec1..d4931dad07aa 100644
> > --- a/drivers/tee/optee/device.c
> > +++ b/drivers/tee/optee/device.c
> > @@ -21,7 +21,6 @@
> > * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
> > * TEE_ERROR_SHORT_BUFFER - Output buffer size less than required
> > */
> > -#define PTA_CMD_GET_DEVICES 0x0
> >
> > static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> > {
> > @@ -32,7 +31,8 @@ static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
> > }
> >
> > static int get_devices(struct tee_context *ctx, u32 session,
> > - struct tee_shm *device_shm, u32 *shm_size)
> > + struct tee_shm *device_shm, u32 *shm_size,
> > + u32 func)
> > {
> > int ret = 0;
> > struct tee_ioctl_invoke_arg inv_arg;
> > @@ -42,7 +42,7 @@ static int get_devices(struct tee_context *ctx, u32 session,
> > memset(¶m, 0, sizeof(param));
> >
> > /* Invoke PTA_CMD_GET_DEVICES function */
> > - inv_arg.func = PTA_CMD_GET_DEVICES;
> > + inv_arg.func = func;
> > inv_arg.session = session;
> > inv_arg.num_params = 4;
> >
> > @@ -87,7 +87,7 @@ static int optee_register_device(const uuid_t *device_uuid, u32 device_id)
> > return rc;
> > }
> >
> > -int optee_enumerate_devices(void)
> > +static int __optee_enumerate_devices(u32 func)
> > {
> > const uuid_t pta_uuid =
> > UUID_INIT(0x7011a688, 0xddde, 0x4053,
> > @@ -118,7 +118,7 @@ int optee_enumerate_devices(void)
> > goto out_ctx;
> > }
> >
> > - rc = get_devices(ctx, sess_arg.session, NULL, &shm_size);
> > + rc = get_devices(ctx, sess_arg.session, NULL, &shm_size, func);
> > if (rc < 0 || !shm_size)
> > goto out_sess;
> >
> > @@ -130,7 +130,7 @@ int optee_enumerate_devices(void)
> > goto out_sess;
> > }
> >
> > - rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size);
> > + rc = get_devices(ctx, sess_arg.session, device_shm, &shm_size, func);
> > if (rc < 0)
> > goto out_shm;
> >
> > @@ -158,3 +158,8 @@ int optee_enumerate_devices(void)
> >
> > return rc;
> > }
> > +
> > +int optee_enumerate_devices(u32 func)
> > +{
> > + return __optee_enumerate_devices(func);
> > +}
> > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > index d9c5037b4e03..6cdac4bb7253 100644
> > --- a/drivers/tee/optee/optee_private.h
> > +++ b/drivers/tee/optee/optee_private.h
> > @@ -78,6 +78,8 @@ struct optee_supp {
> > * @memremaped_shm virtual address of memory in shared memory pool
> > * @sec_caps: secure world capabilities defined by
> > * OPTEE_SMC_SEC_CAP_* in optee_smc.h
> > + * @scan_bus_wq workqueue to scan optee bus and register optee drivers
> > + * @scan_bus_work workq to scan optee bus and register optee drivers
> > */
> > struct optee {
> > struct tee_device *supp_teedev;
> > @@ -89,6 +91,8 @@ struct optee {
> > struct tee_shm_pool *pool;
> > void *memremaped_shm;
> > u32 sec_caps;
> > + struct workqueue_struct *scan_bus_wq;
> > + struct work_struct scan_bus_work;
> > };
> >
> > struct optee_session {
> > @@ -173,7 +177,9 @@ void optee_free_pages_list(void *array, size_t num_entries);
> > void optee_fill_pages_list(u64 *dst, struct page **pages, int num_pages,
> > size_t page_offset);
> >
> > -int optee_enumerate_devices(void);
> > +#define PTA_CMD_GET_DEVICES 0x0
> > +#define PTA_CMD_GET_DEVICES_SUPP 0x1
> > +int optee_enumerate_devices(u32 func);
> >
> > /*
> > * Small helpers
> > --
> > 2.17.1
> >
+ Thiru (original author), Ilias, Joakim
Hi Jarkko,
On Mon, 25 May 2020 at 12:20, Maxim Uvarov <[email protected]> wrote:
>
> On Fri, 22 May 2020 at 23:03, Jarkko Sakkinen
> <[email protected]> wrote:
> >
> > On Fri, May 22, 2020 at 10:29:44PM +0300, Maxim Uvarov wrote:
> > > On Fri, 22 May 2020 at 20:15, Jarkko Sakkinen
> > > <[email protected]> wrote:
> > > >
> > > > On Thu, May 21, 2020 at 09:47:43AM +0300, Maxim Uvarov wrote:
> > > > > Register driver on TEE bus. module tee registers bus,
> > > >
> > > > "on the TEE bus"
> > > >
> > > > "The module tee"
> > > >
> > > > > and module optee calls optee_enumerate_devices() to scan
> > > > > all devices on the bus. Trusted Application for this driver
> > > >
> > > > Looking at drivers/tee, it shows that tee and optee are in fact the same
> > > > module as opposed to what your commit message says.
> > > >
> > >
> > > In the current kernel it's 2 different modules.
> > >
> > > > > can be Early TA's (can be compiled into optee-os). In that
> > > > > case it will be on OPTEE bus before linux booting. Also
> > > > > optee-suplicant application is needed to be loaded between
> > > > > OPTEE module and ftpm module to maintain functionality
> > > > > for fTPM driver.
> > > >
> > > > Why is this needed and why things worked before having this?
If you remembered earlier discussions when this driver was added,
tee-supplicant dependency concern was raised at that time too. But the
response from author [1] was to use a workaround in firmware to
overcome the initialization issue of fTPM driver.
Basically while using upstream OP-TEE, fTPM NV RAM is implemented via
RPMB secure storage [2]. So any fTPM operation dependent on NV RAM may
fail without access to RPMB secure storage.
And during kernel boot, RPMB access isn't available (there were some
prior efforts [3] around this but unfortunately didn't land in
upstream) due to which we need to rely on user mode tee-supplicant for
corresponding access.
So we should only register fTPM device when the underlying
infrastructure is working, which is something this patch-set addresses
via registering fTPM device only when the tee-supplicant is up and
running.
[1] https://lkml.org/lkml/2019/7/4/779
[2] https://optee.readthedocs.io/en/latest/architecture/secure_storage.html#rpmb-secure-storage
[3] https://lwn.net/Articles/682276/
> > > >
> > >
> > > Before these changes user space has to drive boot sequence. I.e. tee
> > > and optee modules loads, then application tee-supplicant has to start
> > > and only then module ftpm can be loaded. The reason for that is
> > > storage services are implemented in userspace and driver needs them.
> >
> > Is the TPM implementation uploaded to TEE from user space and or what
> > storage are we talking about? Not sure how these storage services
> > connect to the TPM.
Please see my response above.
-Sumit
> >
> > /Jarkko
>
> Jakko,
> tee-supplicant application provides state machine over callbacks with
> RPC messages.
> https://github.com/OP-TEE/optee_client/blob/master/tee-supplicant/src/tee_supplicant.c#L614
> It also allocates shm. Without running tee-supplicant
> tee_client_open_session() will fail.
> optee_open_session()->get_msg_arg()->tee_shm_alloc()->...
> Optee team wanted to remove some dependencies from tee-supplicant with
> moving code
> to the kernel. But for now I think that should be out of the scope of
> current patches due to
> they fix driver initialization on tee bus without breaking current
> functionality.
>
> Maxim.
On Mon, 2020-05-25 at 09:50 +0300, Maxim Uvarov wrote:
> Jakko,
> tee-supplicant application provides state machine over callbacks with
> RPC messages.
> https://github.com/OP-TEE/optee_client/blob/master/tee-supplicant/src/tee_supplicant.c#L614
> It also allocates shm. Without running tee-supplicant
> tee_client_open_session() will fail.
> optee_open_session()->get_msg_arg()->tee_shm_alloc()->...
> Optee team wanted to remove some dependencies from tee-supplicant with
> moving code
> to the kernel. But for now I think that should be out of the scope of
> current patches due to
> they fix driver initialization on tee bus without breaking current
> functionality.
So what is the role in high-level for tee-supplicant? Why does it
exist? No time to dive into code unfortunately.
These kernel commits do not explain in simple terms enough how all
of these entities connect with each other, if you don't have that
understanding beforehand.
/Jarkko
On Wed, 27 May 2020 at 22:42, Jarkko Sakkinen
<[email protected]> wrote:
>
> On Mon, 2020-05-25 at 09:50 +0300, Maxim Uvarov wrote:
> > Jakko,
> > tee-supplicant application provides state machine over callbacks with
> > RPC messages.
> > https://github.com/OP-TEE/optee_client/blob/master/tee-supplicant/src/tee_supplicant.c#L614
> > It also allocates shm. Without running tee-supplicant
> > tee_client_open_session() will fail.
> > optee_open_session()->get_msg_arg()->tee_shm_alloc()->...
> > Optee team wanted to remove some dependencies from tee-supplicant with
> > moving code
> > to the kernel. But for now I think that should be out of the scope of
> > current patches due to
> > they fix driver initialization on tee bus without breaking current
> > functionality.
>
> So what is the role in high-level for tee-supplicant? Why does it
> exist? No time to dive into code unfortunately.
>
Original implementation for tee-supplicant does several things:
1. allocate shm
2. load ta from user space (fs file)
3. emulate rpmb
4. also there are some ftrace and socket functions which I did not use.
As I I understand, current implementation uses tee-supplicant and it's
library as
API from user land to Trusted OS.
Some docs can be found here:
https://optee.readthedocs.io/en/latest/architecture/index.html
> These kernel commits do not explain in simple terms enough how all
> of these entities connect with each other, if you don't have that
> understanding beforehand.
>
Yes, that is true. But I think it's something new and good docs will
be some time later.
> /Jarkko
>
Regards,
Maxim.
On Thu, May 28, 2020 at 11:08:18AM +0300, Maxim Uvarov wrote:
> On Wed, 27 May 2020 at 22:42, Jarkko Sakkinen
> <[email protected]> wrote:
> >
> > On Mon, 2020-05-25 at 09:50 +0300, Maxim Uvarov wrote:
> > > Jakko,
> > > tee-supplicant application provides state machine over callbacks with
> > > RPC messages.
> > > https://github.com/OP-TEE/optee_client/blob/master/tee-supplicant/src/tee_supplicant.c#L614
> > > It also allocates shm. Without running tee-supplicant
> > > tee_client_open_session() will fail.
> > > optee_open_session()->get_msg_arg()->tee_shm_alloc()->...
> > > Optee team wanted to remove some dependencies from tee-supplicant with
> > > moving code
> > > to the kernel. But for now I think that should be out of the scope of
> > > current patches due to
> > > they fix driver initialization on tee bus without breaking current
> > > functionality.
> >
> > So what is the role in high-level for tee-supplicant? Why does it
> > exist? No time to dive into code unfortunately.
> >
>
> Original implementation for tee-supplicant does several things:
> 1. allocate shm
> 2. load ta from user space (fs file)
> 3. emulate rpmb
> 4. also there are some ftrace and socket functions which I did not use.
>
> As I I understand, current implementation uses tee-supplicant and it's
> library as
> API from user land to Trusted OS.
>
> Some docs can be found here:
> https://optee.readthedocs.io/en/latest/architecture/index.html
>
>
>
> > These kernel commits do not explain in simple terms enough how all
> > of these entities connect with each other, if you don't have that
> > understanding beforehand.
> >
>
> Yes, that is true. But I think it's something new and good docs will
> be some time later.
There's already some in Documentation/tee.txt, but it will get outdated
if we don't update it when we architectural changes like this. It's a
pity we missed updating it with the introduction of the bus. It seems a
good time to do it now so it easier to follow what's done.
Cheers,
Jens
>
> > /Jarkko
> >
>
> Regards,
> Maxim.
On Thu, 28 May 2020 at 15:41, Jens Wiklander <[email protected]> wrote:
>
> On Thu, May 28, 2020 at 11:08:18AM +0300, Maxim Uvarov wrote:
> > On Wed, 27 May 2020 at 22:42, Jarkko Sakkinen
> > <[email protected]> wrote:
> > >
> > > On Mon, 2020-05-25 at 09:50 +0300, Maxim Uvarov wrote:
> > > > Jakko,
> > > > tee-supplicant application provides state machine over callbacks with
> > > > RPC messages.
> > > > https://github.com/OP-TEE/optee_client/blob/master/tee-supplicant/src/tee_supplicant.c#L614
> > > > It also allocates shm. Without running tee-supplicant
> > > > tee_client_open_session() will fail.
> > > > optee_open_session()->get_msg_arg()->tee_shm_alloc()->...
> > > > Optee team wanted to remove some dependencies from tee-supplicant with
> > > > moving code
> > > > to the kernel. But for now I think that should be out of the scope of
> > > > current patches due to
> > > > they fix driver initialization on tee bus without breaking current
> > > > functionality.
> > >
> > > So what is the role in high-level for tee-supplicant? Why does it
> > > exist? No time to dive into code unfortunately.
> > >
> >
> > Original implementation for tee-supplicant does several things:
> > 1. allocate shm
> > 2. load ta from user space (fs file)
> > 3. emulate rpmb
> > 4. also there are some ftrace and socket functions which I did not use.
> >
> > As I I understand, current implementation uses tee-supplicant and it's
> > library as
> > API from user land to Trusted OS.
> >
> > Some docs can be found here:
> > https://optee.readthedocs.io/en/latest/architecture/index.html
> >
> >
> >
> > > These kernel commits do not explain in simple terms enough how all
> > > of these entities connect with each other, if you don't have that
> > > understanding beforehand.
> > >
> >
> > Yes, that is true. But I think it's something new and good docs will
> > be some time later.
>
> There's already some in Documentation/tee.txt, but it will get outdated
> if we don't update it when we architectural changes like this. It's a
> pity we missed updating it with the introduction of the bus. It seems a
> good time to do it now so it easier to follow what's done.
Agree, let me try to update documentation for TEE bus. Will share it
as a separate patch.
-Sumit
>
> Cheers,
> Jens
>
> >
> > > /Jarkko
> > >
> >
> > Regards,
> > Maxim.