2023-11-02 21:09:00

by Cameron Williams

Subject: [PATCH v2 2/2 RESEND] parport: parport_serial: Add Brainboxes device IDs and geometry

Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475,
IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry"
for the cards.
This patch requires part 1 of this series.

Cc: [email protected]
Signed-off-by: Cameron Williams <[email protected]>
---
Looks like this slipped through the grate the first time. Cc LKML and stable this time.

v1 - v2:
This is a re-submission for [1] with the changes separated into different patches.
Part 1 of this series is required for this patch.

[1] https://lore.kernel.org/all/DU0PR02MB7899033E7E81EAF3694BC20AC4F8A@DU0PR02MB7899.eurprd02.prod.outlook.com/

drivers/parport/parport_serial.c | 56 ++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)

diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index 11989368611a..e89585051fde 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -285,6 +285,38 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
0x0104, 0, 0, sunix_5099a },

+ /* Brainboxes UC-203 */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0bc1,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0bc2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 },
+
+ /* Brainboxes UC-257 */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0861,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0862,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0863,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 },
+
+ /* Brainboxes UC-414 */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0e61,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc414 },
+
+ /* Brainboxes UC-475 */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0981,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0982,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 },
+
+ /* Brainboxes IS-300/IS-500 */
+ { PCI_VENDOR_ID_INTASHIELD, 0x0da0,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_is300 },
+
+ /* Brainboxes PX-263/PX-295 */
+ { PCI_VENDOR_ID_INTASHIELD, 0x402c,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_px263 },
+
{ 0, } /* terminate list */
};
MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
@@ -550,6 +582,30 @@ static struct pciserial_board pci_parport_serial_boards[] = {
.base_baud = 921600,
.uart_offset = 0x8,
},
+ [brainboxes_uc257] = {
+ .flags = FL_BASE2,
+ .num_ports = 2,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [brainboxes_is300] = {
+ .flags = FL_BASE2,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [brainboxes_uc414] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
+ [brainboxes_px263] = {
+ .flags = FL_BASE2,
+ .num_ports = 4,
+ .base_baud = 921600,
+ .uart_offset = 8,
+ },
};

struct parport_serial_private {
--
2.42.0

2023-11-04 09:46:56

by Sudip Mukherjee

Subject: Re: [PATCH v2 2/2 RESEND] parport: parport_serial: Add Brainboxes device IDs and geometry

On Thu, 2 Nov 2023 at 21:08, Cameron Williams <[email protected]> wrote:
>
> Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475,
> IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry"
> for the cards.
> This patch requires part 1 of this series.
>
> Cc: [email protected]
> Signed-off-by: Cameron Williams <[email protected]>

Acked-by: Sudip Mukherjee <[email protected]>


--
Regards
Sudip