From: Gene Chen <[email protected]>
Add bindings for MT6360 PMIC
Signed-off-by: Gene Chen <[email protected]>
---
Documentation/devicetree/bindings/mfd/mt6360.yaml | 142 ++++++++++++++++++++++
1 file changed, 142 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
diff --git a/Documentation/devicetree/bindings/mfd/mt6360.yaml b/Documentation/devicetree/bindings/mfd/mt6360.yaml
new file mode 100644
index 0000000..5ad1afd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6360.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mt6360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MT6360 PMIC from MediaTek Integrated
+
+maintainers:
+ - Gene Chen <[email protected]>
+
+description: |
+ MT6360 is a PMIC device with the following sub modules.
+ It is interfaced to host controller using I2C interface.
+
+ This document describes the binding for PMIC device and its sub module.
+
+properties:
+ compatible:
+ const: mediatek,mt6360
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ enum:
+ - IRQB
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+ description:
+ The first cell is the IRQ number.
+
+ regulator:
+ $ref: ../regulator/mt6360-regulator.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mt6360@34 {
+ compatible = "mediatek,mt6360";
+ reg = <0x34>;
+ wakeup-source;
+ interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "IRQB";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ regulator {
+ compatible = "mediatek,mt6360-regulator";
+ LDO_VIN3-supply = <&BUCK2>;
+ buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "mt6360,buck1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ BUCK2: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "mt6360,buck2";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP
+ MT6360_OPMODE_ULP>;
+ };
+ ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "mt6360,ldo6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "mt6360,ldo7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "mt6360,ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "mt6360,ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "mt6360,ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "mt6360,ldo5";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-allowed-modes = <MT6360_OPMODE_NORMAL
+ MT6360_OPMODE_LP>;
+ };
+ };
+ };
+ };
--
2.7.4
Dear Reviewers,
Please let me know if there is anything need to be revised.
Gene Chen <[email protected]> 於 2020年8月20日 週四 下午4:36寫道：
>
> From: Gene Chen <[email protected]>
>
> Add bindings for MT6360 PMIC
>
> Signed-off-by: Gene Chen <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/mt6360.yaml | 142 ++++++++++++++++++++++
> 1 file changed, 142 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/mt6360.yaml b/Documentation/devicetree/bindings/mfd/mt6360.yaml
> new file mode 100644
> index 0000000..5ad1afd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/mt6360.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/mt6360.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MT6360 PMIC from MediaTek Integrated
> +
> +maintainers:
> + - Gene Chen <[email protected]>
> +
> +description: |
> + MT6360 is a PMIC device with the following sub modules.
> + It is interfaced to host controller using I2C interface.
> +
> + This document describes the binding for PMIC device and its sub module.
> +
> +properties:
> + compatible:
> + const: mediatek,mt6360
> +
> + reg:
> + description:
> + I2C device address.
> + maxItems: 1
> +
> + wakeup-source: true
> +
> + interrupts:
> + maxItems: 1
> +
> + interrupt-names:
> + enum:
> + - IRQB
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 1
> + description:
> + The first cell is the IRQ number.
> +
> + regulator:
> + $ref: ../regulator/mt6360-regulator.yaml
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + mt6360@34 {
> + compatible = "mediatek,mt6360";
> + reg = <0x34>;
> + wakeup-source;
> + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-names = "IRQB";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + regulator {
> + compatible = "mediatek,mt6360-regulator";
> + LDO_VIN3-supply = <&BUCK2>;
> + buck1 {
> + regulator-compatible = "BUCK1";
> + regulator-name = "mt6360,buck1";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP
> + MT6360_OPMODE_ULP>;
> + };
> + BUCK2: buck2 {
> + regulator-compatible = "BUCK2";
> + regulator-name = "mt6360,buck2";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP
> + MT6360_OPMODE_ULP>;
> + };
> + ldo6 {
> + regulator-compatible = "LDO6";
> + regulator-name = "mt6360,ldo6";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2100000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> + ldo7 {
> + regulator-compatible = "LDO7";
> + regulator-name = "mt6360,ldo7";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <2100000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> + ldo1 {
> + regulator-compatible = "LDO1";
> + regulator-name = "mt6360,ldo1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> + ldo2 {
> + regulator-compatible = "LDO2";
> + regulator-name = "mt6360,ldo2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> + ldo3 {
> + regulator-compatible = "LDO3";
> + regulator-name = "mt6360,ldo3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> + ldo5 {
> + regulator-compatible = "LDO5";
> + regulator-name = "mt6360,ldo5";
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> + MT6360_OPMODE_LP>;
> + };
> + };
> + };
> + };
> --
> 2.7.4
>
Dear Reviewers,
Should I wait for all sub-devices dt-binding review done, then
send the integral binding document?
Gene Chen <[email protected]> 於 2020年11月13日 週五 下午1:54寫道：
>
> Dear Reviewers,
>
> Please let me know if there is anything need to be revised.
>
> Gene Chen <[email protected]> 於 2020年8月20日 週四 下午4:36寫道：
> >
> > From: Gene Chen <[email protected]>
> >
> > Add bindings for MT6360 PMIC
> >
> > Signed-off-by: Gene Chen <[email protected]>
> > ---
> > Documentation/devicetree/bindings/mfd/mt6360.yaml | 142 ++++++++++++++++++++++
> > 1 file changed, 142 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mfd/mt6360.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/mt6360.yaml b/Documentation/devicetree/bindings/mfd/mt6360.yaml
> > new file mode 100644
> > index 0000000..5ad1afd
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/mt6360.yaml
> > @@ -0,0 +1,142 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/mt6360.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MT6360 PMIC from MediaTek Integrated
> > +
> > +maintainers:
> > + - Gene Chen <[email protected]>
> > +
> > +description: |
> > + MT6360 is a PMIC device with the following sub modules.
> > + It is interfaced to host controller using I2C interface.
> > +
> > + This document describes the binding for PMIC device and its sub module.
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt6360
> > +
> > + reg:
> > + description:
> > + I2C device address.
> > + maxItems: 1
> > +
> > + wakeup-source: true
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-names:
> > + enum:
> > + - IRQB
> > +
> > + interrupt-controller: true
> > +
> > + "#interrupt-cells":
> > + const: 1
> > + description:
> > + The first cell is the IRQ number.
> > +
> > + regulator:
> > + $ref: ../regulator/mt6360-regulator.yaml
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-controller
> > + - "#interrupt-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
> > + i2c {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + mt6360@34 {
> > + compatible = "mediatek,mt6360";
> > + reg = <0x34>;
> > + wakeup-source;
> > + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
> > + interrupt-names = "IRQB";
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > + regulator {
> > + compatible = "mediatek,mt6360-regulator";
> > + LDO_VIN3-supply = <&BUCK2>;
> > + buck1 {
> > + regulator-compatible = "BUCK1";
> > + regulator-name = "mt6360,buck1";
> > + regulator-min-microvolt = <300000>;
> > + regulator-max-microvolt = <1300000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP
> > + MT6360_OPMODE_ULP>;
> > + };
> > + BUCK2: buck2 {
> > + regulator-compatible = "BUCK2";
> > + regulator-name = "mt6360,buck2";
> > + regulator-min-microvolt = <300000>;
> > + regulator-max-microvolt = <1300000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP
> > + MT6360_OPMODE_ULP>;
> > + };
> > + ldo6 {
> > + regulator-compatible = "LDO6";
> > + regulator-name = "mt6360,ldo6";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <2100000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP>;
> > + };
> > + ldo7 {
> > + regulator-compatible = "LDO7";
> > + regulator-name = "mt6360,ldo7";
> > + regulator-min-microvolt = <500000>;
> > + regulator-max-microvolt = <2100000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP>;
> > + };
> > + ldo1 {
> > + regulator-compatible = "LDO1";
> > + regulator-name = "mt6360,ldo1";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <3600000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP>;
> > + };
> > + ldo2 {
> > + regulator-compatible = "LDO2";
> > + regulator-name = "mt6360,ldo2";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <3600000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP>;
> > + };
> > + ldo3 {
> > + regulator-compatible = "LDO3";
> > + regulator-name = "mt6360,ldo3";
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <3600000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP>;
> > + };
> > + ldo5 {
> > + regulator-compatible = "LDO5";
> > + regulator-name = "mt6360,ldo5";
> > + regulator-min-microvolt = <2700000>;
> > + regulator-max-microvolt = <3600000>;
> > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL
> > + MT6360_OPMODE_LP>;
> > + };
> > + };
> > + };
> > + };
> > --
> > 2.7.4
> >
On Mon, 21 Dec 2020, Gene Chen wrote:
> Dear Reviewers,
>
> Should I wait for all sub-devices dt-binding review done, then
> send the integral binding document?
Please re-send whatever you have.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog