Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.
Signed-off-by: Rakesh Pillai <[email protected]>
---
Changes from v10:
- Corrected the position of wifi node, as per address
- Removed the wlan_fw_mem from reserved memory, since
its already added as reserved memory in board DT file.
---
arch/arm64/boot/dts/qcom/sc7180-idp.dts | 7 +++++++
arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++
2 files changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 4e9149d..38b102e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -389,6 +389,13 @@
};
};
+&wifi {
+ status = "okay";
+ wifi-firmware {
+ iommus = <&apps_smmu 0xc2 0x1>;
+ };
+};
+
/* PINCTRL - additions to nodes defined in sc7180.dtsi */
&qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6b12c60..da79f8f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2811,6 +2811,28 @@
#freq-domain-cells = <1>;
};
+
+ wifi: wifi@18800000 {
+ compatible = "qcom,wcn3990-wifi";
+ reg = <0 0x18800000 0 0x800000>;
+ reg-names = "membase";
+ iommus = <&apps_smmu 0xc0 0x1>;
+ interrupts =
+ <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+ <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+ <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+ <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+ <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+ <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+ <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+ <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+ <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+ <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+ <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+ <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+ memory-region = <&wlan_mem>;
+ status = "disabled";
+ };
};
thermal-zones {
--
2.7.4
On 2020-05-20 09:26, Rakesh Pillai wrote:
> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on sc7180 soc.
>
> Signed-off-by: Rakesh Pillai <[email protected]>
> ---
> Changes from v10:
> - Corrected the position of wifi node, as per address
> - Removed the wlan_fw_mem from reserved memory, since
> its already added as reserved memory in board DT file.
Reviewed-by: Sibi Sankar <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 7 +++++++
> arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++
> 2 files changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 4e9149d..38b102e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -389,6 +389,13 @@
> };
> };
>
> +&wifi {
> + status = "okay";
> + wifi-firmware {
> + iommus = <&apps_smmu 0xc2 0x1>;
> + };
> +};
> +
> /* PINCTRL - additions to nodes defined in sc7180.dtsi */
>
> &qspi_clk {
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6b12c60..da79f8f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2811,6 +2811,28 @@
>
> #freq-domain-cells = <1>;
> };
> +
> + wifi: wifi@18800000 {
> + compatible = "qcom,wcn3990-wifi";
> + reg = <0 0x18800000 0 0x800000>;
> + reg-names = "membase";
> + iommus = <&apps_smmu 0xc0 0x1>;
> + interrupts =
> + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
> + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
> + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
> + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
> + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
> + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
> + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
> + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
> + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
> + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
> + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
> + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
> + memory-region = <&wlan_mem>;
> + status = "disabled";
> + };
> };
>
> thermal-zones {
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.
On Tue, May 19, 2020 at 8:57 PM Rakesh Pillai <[email protected]> wrote:
>
> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on sc7180 soc.
>
> Signed-off-by: Rakesh Pillai <[email protected]>
Reviewed-by: Evan Green <[email protected]>
On Thu, May 21, 2020 at 9:19 AM Evan Green <[email protected]> wrote:
>
> On Tue, May 19, 2020 at 8:57 PM Rakesh Pillai <[email protected]> wrote:
> >
> > Add device node for the ath10k SNOC platform driver probe
> > and add resources required for WCN3990 on sc7180 soc.
> >
> > Signed-off-by: Rakesh Pillai <[email protected]>
>
> Reviewed-by: Evan Green <[email protected]>
Looks like this never landed anywhere. Is it blocked on something?
-Evan
Hi Evan,
All the dependent patches are already merged.
Thanks,
Rakesh Pillai.
> -----Original Message-----
> From: Evan Green <[email protected]>
> Sent: Thursday, June 18, 2020 4:15 AM
> To: Rakesh Pillai <[email protected]>; Bjorn Andersson
> <[email protected]>
> Cc: open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
> <[email protected]>; linux-arm Mailing List <linux-arm-
> [email protected]>; LKML <[email protected]>; linux-
> arm-msm <[email protected]>
> Subject: Re: [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> module device node
>
> On Thu, May 21, 2020 at 9:19 AM Evan Green <[email protected]>
> wrote:
> >
> > On Tue, May 19, 2020 at 8:57 PM Rakesh Pillai <[email protected]>
> wrote:
> > >
> > > Add device node for the ath10k SNOC platform driver probe
> > > and add resources required for WCN3990 on sc7180 soc.
> > >
> > > Signed-off-by: Rakesh Pillai <[email protected]>
> >
> > Reviewed-by: Evan Green <[email protected]>
>
> Looks like this never landed anywhere. Is it blocked on something?
> -Evan
On Wed 17 Jun 15:45 PDT 2020, Evan Green wrote:
> On Thu, May 21, 2020 at 9:19 AM Evan Green <[email protected]> wrote:
> >
> > On Tue, May 19, 2020 at 8:57 PM Rakesh Pillai <[email protected]> wrote:
> > >
> > > Add device node for the ath10k SNOC platform driver probe
> > > and add resources required for WCN3990 on sc7180 soc.
> > >
> > > Signed-off-by: Rakesh Pillai <[email protected]>
> >
> > Reviewed-by: Evan Green <[email protected]>
>
> Looks like this never landed anywhere. Is it blocked on something?
I remember waiting for some reviews, but I see those are in place. Then
as I was applying this I saw that a v12 had shown up, with regulators.
So, I applied v12.
Thanks,
Bjorn
> -----Original Message-----
> From: Bjorn Andersson <[email protected]>
> Sent: Monday, June 22, 2020 12:36 AM
> To: Evan Green <[email protected]>
> Cc: Rakesh Pillai <[email protected]>; open list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS <[email protected]>; linux-arm
> Mailing List <[email protected]>; LKML <linux-
> [email protected]>; linux-arm-msm <linux-arm-
> [email protected]>
> Subject: Re: [PATCH v11] arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> module device node
>
> On Wed 17 Jun 15:45 PDT 2020, Evan Green wrote:
>
> > On Thu, May 21, 2020 at 9:19 AM Evan Green <[email protected]>
> wrote:
> > >
> > > On Tue, May 19, 2020 at 8:57 PM Rakesh Pillai <[email protected]>
> wrote:
> > > >
> > > > Add device node for the ath10k SNOC platform driver probe
> > > > and add resources required for WCN3990 on sc7180 soc.
> > > >
> > > > Signed-off-by: Rakesh Pillai <[email protected]>
> > >
> > > Reviewed-by: Evan Green <[email protected]>
> >
> > Looks like this never landed anywhere. Is it blocked on something?
>
> I remember waiting for some reviews, but I see those are in place. Then
> as I was applying this I saw that a v12 had shown up, with regulators.
>
> So, I applied v12.
Thanks Bjorn.
>
> Thanks,
> Bjorn