2024-05-06 15:15:18

by Johan Hovold

[permalink] [raw]
Subject: [PATCH 05/13] mfd: pm8008: use lower case hex notation

Use lower case hex notation for consistency.

Signed-off-by: Johan Hovold <[email protected]>
---
drivers/mfd/qcom-pm8008.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index 42dd4bf039c9..f1c68b3da1b6 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -38,8 +38,8 @@ enum {

#define PM8008_PERIPH_0_BASE 0x900
#define PM8008_PERIPH_1_BASE 0x2400
-#define PM8008_PERIPH_2_BASE 0xC000
-#define PM8008_PERIPH_3_BASE 0xC100
+#define PM8008_PERIPH_2_BASE 0xc000
+#define PM8008_PERIPH_3_BASE 0xc100

#define PM8008_TEMP_ALARM_ADDR PM8008_PERIPH_1_BASE
#define PM8008_GPIO1_ADDR PM8008_PERIPH_2_BASE
@@ -153,7 +153,7 @@ static const struct regmap_irq_chip pm8008_irq_chip = {
static struct regmap_config qcom_mfd_regmap_cfg = {
.reg_bits = 16,
.val_bits = 8,
- .max_register = 0xFFFF,
+ .max_register = 0xffff,
};

static int pm8008_probe(struct i2c_client *client)
--
2.43.2



2024-05-08 20:07:14

by Bryan O'Donoghue

[permalink] [raw]
Subject: Re: [PATCH 05/13] mfd: pm8008: use lower case hex notation

On 06/05/2024 16:08, Johan Hovold wrote:
> Use lower case hex notation for consistency.
>
> Signed-off-by: Johan Hovold <[email protected]>
> ---
> drivers/mfd/qcom-pm8008.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
> index 42dd4bf039c9..f1c68b3da1b6 100644
> --- a/drivers/mfd/qcom-pm8008.c
> +++ b/drivers/mfd/qcom-pm8008.c
> @@ -38,8 +38,8 @@ enum {
>
> #define PM8008_PERIPH_0_BASE 0x900
> #define PM8008_PERIPH_1_BASE 0x2400
> -#define PM8008_PERIPH_2_BASE 0xC000
> -#define PM8008_PERIPH_3_BASE 0xC100
> +#define PM8008_PERIPH_2_BASE 0xc000
> +#define PM8008_PERIPH_3_BASE 0xc100
>
> #define PM8008_TEMP_ALARM_ADDR PM8008_PERIPH_1_BASE
> #define PM8008_GPIO1_ADDR PM8008_PERIPH_2_BASE
> @@ -153,7 +153,7 @@ static const struct regmap_irq_chip pm8008_irq_chip = {
> static struct regmap_config qcom_mfd_regmap_cfg = {
> .reg_bits = 16,
> .val_bits = 8,
> - .max_register = 0xFFFF,
> + .max_register = 0xffff,
> };
>
> static int pm8008_probe(struct i2c_client *client)

Reviewed-by: Bryan O'Donoghue <[email protected]>

2024-05-08 22:04:05

by Stephen Boyd

[permalink] [raw]
Subject: Re: [PATCH 05/13] mfd: pm8008: use lower case hex notation

Quoting Johan Hovold (2024-05-06 08:08:22)
> Use lower case hex notation for consistency.
>
> Signed-off-by: Johan Hovold <[email protected]>
> ---

Reviewed-by: Stephen Boyd <[email protected]>