2021-02-01 21:11:17

by Claus Stovgaard

[permalink] [raw]
Subject: [PATCH] nvme-pci: Mark Phison E16 (Corsair MP600) as IGNORE_DEV_SUBNQN

Tested both with Corsairs firmware 11.3 and 13.0 for the MP600 and both
have the issue as reported by the kernel.

nvme nvme0: missing or invalid SUBNQN field.

Signed-off-by: Claus Stovgaard <[email protected]>
---
drivers/nvme/host/pci.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 81e6389b2042..41b1b0731cbd 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -3242,6 +3242,8 @@ static const struct pci_device_id nvme_id_table[] = {
{ PCI_DEVICE(0x144d, 0xa822), /* Samsung PM1725a */
.driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
NVME_QUIRK_IGNORE_DEV_SUBNQN, },
+ { PCI_DEVICE(0x1987, 0x5016), /* Phison E16 (Corsair MP600) */
+ .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
{ PCI_DEVICE(0x1d1d, 0x1f1f), /* LighNVM qemu device */
.driver_data = NVME_QUIRK_LIGHTNVM, },
{ PCI_DEVICE(0x1d1d, 0x2807), /* CNEX WL */
--
2.26.2


2021-02-02 00:16:21

by Amy Parker

[permalink] [raw]
Subject: Re: [PATCH] nvme-pci: Mark Phison E16 (Corsair MP600) as IGNORE_DEV_SUBNQN

On Mon, Feb 1, 2021 at 1:11 PM Claus Stovgaard
<[email protected]> wrote:
>
> Tested both with Corsairs firmware 11.3 and 13.0 for the MP600 and both
> have the issue as reported by the kernel.
>
> nvme nvme0: missing or invalid SUBNQN field.
>
> Signed-off-by: Claus Stovgaard <[email protected]>
> ---
> drivers/nvme/host/pci.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index 81e6389b2042..41b1b0731cbd 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -3242,6 +3242,8 @@ static const struct pci_device_id nvme_id_table[] = {
> { PCI_DEVICE(0x144d, 0xa822), /* Samsung PM1725a */
> .driver_data = NVME_QUIRK_DELAY_BEFORE_CHK_RDY |
> NVME_QUIRK_IGNORE_DEV_SUBNQN, },
> + { PCI_DEVICE(0x1987, 0x5016), /* Phison E16 (Corsair MP600) */
> + .driver_data = NVME_QUIRK_IGNORE_DEV_SUBNQN, },
> { PCI_DEVICE(0x1d1d, 0x1f1f), /* LighNVM qemu device */
> .driver_data = NVME_QUIRK_LIGHTNVM, },
> { PCI_DEVICE(0x1d1d, 0x2807), /* CNEX WL */
> --
> 2.26.2
>

Can't test this - don't have an MP600 of my own to test with - but it
should work just fine. If anyone else has an MP600 to throw at this
that'd be great.

Acked-by: Amy Parker <[email protected]>

Best regards,
Amy Parker
(she/her/hers)