Hi, Kees
When I'm testing kaslr with kdump, I find that when 2nd kernel is loaded
high, it doesn't boot.
I reserved 128M memory at high with kernel cmdline
"crashkernel=128M,high crashkernel=0,low", and for which I got:
[ 0.000000] Reserving 128MB of memory at 6896MB for crashkernel (System RAM: 6013MB)
Then I load kdump kernel into the reserved memory region, using a local
modified kexec-tools which is passing e820 in boot_params.
The e820 map of system RAM passed to 2nd kernel:
E820 memmap (of RAM):
0000000000001000-000000000009e3ff (1)
00000001af000000-00000001b6f5dfff (1)
00000001b6fff400-00000001b6ffffff (1)
In which, 2nd kernel is loaded at 0x1b5000000.
After triggerred a system crash, 2nd kernel doesn't boot even with
"nokaslr" cmdline:
# echo c > /proc/sysrq-trigger
[..]
I'm in purgatory
early console in decompress_kernel
KASLR disabled...
Decompressing Linux... Parsing ELF... Performing relocations...
32-bit relocation outside of kernel!
-- System halted
I know 32bit relocation code has recently moved to misc.c and it's a
ground work for kaslr on x86_64. However it doesn't work out on a kernel
high loaded case.
I'm not quite familiar with this. But I'm wondering if it makes sense to
skip handle_relocation() if kaslr doesn't take effects (nokaslr or
kaslr failed to find suitable area).
Thanks
WANG Chao
On Mon, Apr 21, 2014 at 3:52 AM, WANG Chao <[email protected]> wrote:
> Hi, Kees
>
> When I'm testing kaslr with kdump, I find that when 2nd kernel is loaded
> high, it doesn't boot.
>
> I reserved 128M memory at high with kernel cmdline
> "crashkernel=128M,high crashkernel=0,low", and for which I got:
>
> [ 0.000000] Reserving 128MB of memory at 6896MB for crashkernel (System RAM: 6013MB)
>
> Then I load kdump kernel into the reserved memory region, using a local
> modified kexec-tools which is passing e820 in boot_params.
>
> The e820 map of system RAM passed to 2nd kernel:
>
> E820 memmap (of RAM):
> 0000000000001000-000000000009e3ff (1)
> 00000001af000000-00000001b6f5dfff (1)
> 00000001b6fff400-00000001b6ffffff (1)
>
> In which, 2nd kernel is loaded at 0x1b5000000.
>
> After triggerred a system crash, 2nd kernel doesn't boot even with
> "nokaslr" cmdline:
>
> # echo c > /proc/sysrq-trigger
> [..]
>
> I'm in purgatory
> early console in decompress_kernel
> KASLR disabled...
>
> Decompressing Linux... Parsing ELF... Performing relocations...
>
> 32-bit relocation outside of kernel!
Interesting, when kernel get at "early console in decompress_kernel"
kernel already in 64 bit...
what does it mean "32-bit relocation outside of kernel" ?
why 32-bit is involved ?
Yinghai
On 04/21/2014 10:56 AM, Yinghai Lu wrote:
>>
>> 32-bit relocation outside of kernel!
>
> Interesting, when kernel get at "early console in decompress_kernel"
> kernel already in 64 bit...
>
> what does it mean "32-bit relocation outside of kernel" ?
>
> why 32-bit is involved ?
>
Most addresses and immediates on 64 bits are 32 bits wide, which is why
we have the high kernel mapping in the first place.
-hpa
On Mon, Apr 21, 2014 at 10:56 AM, Yinghai Lu <[email protected]> wrote:
> On Mon, Apr 21, 2014 at 3:52 AM, WANG Chao <[email protected]> wrote:
>> Hi, Kees
>>
>> When I'm testing kaslr with kdump, I find that when 2nd kernel is loaded
>> high, it doesn't boot.
>>
>> I reserved 128M memory at high with kernel cmdline
>> "crashkernel=128M,high crashkernel=0,low", and for which I got:
>>
>> [ 0.000000] Reserving 128MB of memory at 6896MB for crashkernel (System RAM: 6013MB)
>>
>> Then I load kdump kernel into the reserved memory region, using a local
>> modified kexec-tools which is passing e820 in boot_params.
>>
>> The e820 map of system RAM passed to 2nd kernel:
>>
>> E820 memmap (of RAM):
>> 0000000000001000-000000000009e3ff (1)
>> 00000001af000000-00000001b6f5dfff (1)
>> 00000001b6fff400-00000001b6ffffff (1)
>>
>> In which, 2nd kernel is loaded at 0x1b5000000.
>>
>> After triggerred a system crash, 2nd kernel doesn't boot even with
>> "nokaslr" cmdline:
>>
>> # echo c > /proc/sysrq-trigger
>> [..]
>>
>> I'm in purgatory
>> early console in decompress_kernel
>> KASLR disabled...
>>
>> Decompressing Linux... Parsing ELF... Performing relocations...
>>
>> 32-bit relocation outside of kernel!
>
> Interesting, when kernel get at "early console in decompress_kernel"
> kernel already in 64 bit...
>
> what does it mean "32-bit relocation outside of kernel" ?
>
> why 32-bit is involved ?
The 64-bit kernel has both 64 and 32 bit relocations (there are two
tables at the end of the kernel image). The error means that the
resulting relocation is believed to be outside the kernel image:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/x86/boot/compressed/misc.c#n283
Which means there is likely something wrong with this calculation in
your situation:
/*
* Calculate the delta between where vmlinux was linked to load
* and where it was actually loaded.
*/
delta = min_addr - LOAD_PHYSICAL_ADDR;
-Kees
--
Kees Cook
Chrome OS Security
On 04/21/14 at 11:01am, Kees Cook wrote:
> On Mon, Apr 21, 2014 at 10:56 AM, Yinghai Lu <[email protected]> wrote:
> > On Mon, Apr 21, 2014 at 3:52 AM, WANG Chao <[email protected]> wrote:
> >> Hi, Kees
> >>
> >> When I'm testing kaslr with kdump, I find that when 2nd kernel is loaded
> >> high, it doesn't boot.
> >>
> >> I reserved 128M memory at high with kernel cmdline
> >> "crashkernel=128M,high crashkernel=0,low", and for which I got:
> >>
> >> [ 0.000000] Reserving 128MB of memory at 6896MB for crashkernel (System RAM: 6013MB)
> >>
> >> Then I load kdump kernel into the reserved memory region, using a local
> >> modified kexec-tools which is passing e820 in boot_params.
> >>
> >> The e820 map of system RAM passed to 2nd kernel:
> >>
> >> E820 memmap (of RAM):
> >> 0000000000001000-000000000009e3ff (1)
> >> 00000001af000000-00000001b6f5dfff (1)
> >> 00000001b6fff400-00000001b6ffffff (1)
> >>
> >> In which, 2nd kernel is loaded at 0x1b5000000.
> >>
> >> After triggerred a system crash, 2nd kernel doesn't boot even with
> >> "nokaslr" cmdline:
> >>
> >> # echo c > /proc/sysrq-trigger
> >> [..]
> >>
> >> I'm in purgatory
> >> early console in decompress_kernel
> >> KASLR disabled...
> >>
> >> Decompressing Linux... Parsing ELF... Performing relocations...
> >>
> >> 32-bit relocation outside of kernel!
> >
> > Interesting, when kernel get at "early console in decompress_kernel"
> > kernel already in 64 bit...
> >
> > what does it mean "32-bit relocation outside of kernel" ?
> >
> > why 32-bit is involved ?
>
> The 64-bit kernel has both 64 and 32 bit relocations (there are two
> tables at the end of the kernel image). The error means that the
> resulting relocation is believed to be outside the kernel image:
>
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/x86/boot/compressed/misc.c#n283
>
> Which means there is likely something wrong with this calculation in
> your situation:
>
> /*
> * Calculate the delta between where vmlinux was linked to load
> * and where it was actually loaded.
> */
> delta = min_addr - LOAD_PHYSICAL_ADDR;
>
Probably.
I'm wondering why such relocation is still needed when kaslr
is disabled in 64bit path. I think the relocation work is already
handled in head_64.S.
FWIW, I got these following relocation info:
# arch/x86/tools/relocs --text vmlinux
.section ".data.reloc","a"
.balign 4
.long 0x00000000
.long 0x81004687
[..]
.long 0x81e6b018
.long 0x00000000
.long 0x8100000a
[..]
.long 0x81e6c9fc
Thanks
WANG Chao
On Mon, Apr 21, 2014 at 8:16 PM, WANG Chao <[email protected]> wrote:
> On 04/21/14 at 11:01am, Kees Cook wrote:
>> On Mon, Apr 21, 2014 at 10:56 AM, Yinghai Lu <[email protected]> wrote:
>> > On Mon, Apr 21, 2014 at 3:52 AM, WANG Chao <[email protected]> wrote:
>> >> Hi, Kees
>> >>
>> >> When I'm testing kaslr with kdump, I find that when 2nd kernel is loaded
>> >> high, it doesn't boot.
>> >>
>> >> I reserved 128M memory at high with kernel cmdline
>> >> "crashkernel=128M,high crashkernel=0,low", and for which I got:
>> >>
>> >> [ 0.000000] Reserving 128MB of memory at 6896MB for crashkernel (System RAM: 6013MB)
>> >>
>> >> Then I load kdump kernel into the reserved memory region, using a local
>> >> modified kexec-tools which is passing e820 in boot_params.
>> >>
>> >> The e820 map of system RAM passed to 2nd kernel:
>> >>
>> >> E820 memmap (of RAM):
>> >> 0000000000001000-000000000009e3ff (1)
>> >> 00000001af000000-00000001b6f5dfff (1)
>> >> 00000001b6fff400-00000001b6ffffff (1)
>> >>
>> >> In which, 2nd kernel is loaded at 0x1b5000000.
>> >>
>> >> After triggerred a system crash, 2nd kernel doesn't boot even with
>> >> "nokaslr" cmdline:
>> >>
>> >> # echo c > /proc/sysrq-trigger
>> >> [..]
>> >>
>> >> I'm in purgatory
>> >> early console in decompress_kernel
>> >> KASLR disabled...
>> >>
>> >> Decompressing Linux... Parsing ELF... Performing relocations...
>> >>
>> >> 32-bit relocation outside of kernel!
>> >
>> > Interesting, when kernel get at "early console in decompress_kernel"
>> > kernel already in 64 bit...
>> >
>> > what does it mean "32-bit relocation outside of kernel" ?
>> >
>> > why 32-bit is involved ?
>>
>> The 64-bit kernel has both 64 and 32 bit relocations (there are two
>> tables at the end of the kernel image). The error means that the
>> resulting relocation is believed to be outside the kernel image:
>>
>> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/x86/boot/compressed/misc.c#n283
>>
>> Which means there is likely something wrong with this calculation in
>> your situation:
>>
>> /*
>> * Calculate the delta between where vmlinux was linked to load
>> * and where it was actually loaded.
>> */
>> delta = min_addr - LOAD_PHYSICAL_ADDR;
>>
>
> Probably.
Please check attached that patch that will solve nokaslr.
Somehow I got "KASLR could not find suitable E820 region..."
so i only have "No relocation needed"
will check that later.
On 04/21/14 at 09:58pm, Yinghai Lu wrote:
> On Mon, Apr 21, 2014 at 8:16 PM, WANG Chao <[email protected]> wrote:
> > On 04/21/14 at 11:01am, Kees Cook wrote:
> >> On Mon, Apr 21, 2014 at 10:56 AM, Yinghai Lu <[email protected]> wrote:
> >> > On Mon, Apr 21, 2014 at 3:52 AM, WANG Chao <[email protected]> wrote:
> >> >> Hi, Kees
> >> >>
> >> >> When I'm testing kaslr with kdump, I find that when 2nd kernel is loaded
> >> >> high, it doesn't boot.
> >> >>
> >> >> I reserved 128M memory at high with kernel cmdline
> >> >> "crashkernel=128M,high crashkernel=0,low", and for which I got:
> >> >>
> >> >> [ 0.000000] Reserving 128MB of memory at 6896MB for crashkernel (System RAM: 6013MB)
> >> >>
> >> >> Then I load kdump kernel into the reserved memory region, using a local
> >> >> modified kexec-tools which is passing e820 in boot_params.
> >> >>
> >> >> The e820 map of system RAM passed to 2nd kernel:
> >> >>
> >> >> E820 memmap (of RAM):
> >> >> 0000000000001000-000000000009e3ff (1)
> >> >> 00000001af000000-00000001b6f5dfff (1)
> >> >> 00000001b6fff400-00000001b6ffffff (1)
> >> >>
> >> >> In which, 2nd kernel is loaded at 0x1b5000000.
> >> >>
> >> >> After triggerred a system crash, 2nd kernel doesn't boot even with
> >> >> "nokaslr" cmdline:
> >> >>
> >> >> # echo c > /proc/sysrq-trigger
> >> >> [..]
> >> >>
> >> >> I'm in purgatory
> >> >> early console in decompress_kernel
> >> >> KASLR disabled...
> >> >>
> >> >> Decompressing Linux... Parsing ELF... Performing relocations...
> >> >>
> >> >> 32-bit relocation outside of kernel!
> >> >
> >> > Interesting, when kernel get at "early console in decompress_kernel"
> >> > kernel already in 64 bit...
> >> >
> >> > what does it mean "32-bit relocation outside of kernel" ?
> >> >
> >> > why 32-bit is involved ?
> >>
> >> The 64-bit kernel has both 64 and 32 bit relocations (there are two
> >> tables at the end of the kernel image). The error means that the
> >> resulting relocation is believed to be outside the kernel image:
> >>
> >> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/x86/boot/compressed/misc.c#n283
> >>
> >> Which means there is likely something wrong with this calculation in
> >> your situation:
> >>
> >> /*
> >> * Calculate the delta between where vmlinux was linked to load
> >> * and where it was actually loaded.
> >> */
> >> delta = min_addr - LOAD_PHYSICAL_ADDR;
> >>
> >
> > Probably.
>
> Please check attached that patch that will solve nokaslr.
>
> Somehow I got "KASLR could not find suitable E820 region..."
> so i only have "No relocation needed"
I think it makes sense. If output from choose_kernel_location() doesn't
change (output == output_orig), we shouldn't call relocation code.
There are two situations that makes output == output_orig:
- "nokaslr" case
- "KASLR could not find suitable E820 region" case.
>
> will check that later.
> ---
> arch/x86/boot/compressed/misc.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> Index: linux-2.6/arch/x86/boot/compressed/misc.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/boot/compressed/misc.c
> +++ linux-2.6/arch/x86/boot/compressed/misc.c
> @@ -235,8 +235,9 @@ static void error(char *x)
> asm("hlt");
> }
>
> -#if CONFIG_X86_NEED_RELOCS
> -static void handle_relocations(void *output, unsigned long output_len)
> +#ifdef CONFIG_X86_NEED_RELOCS
> +static void handle_relocations(void *output_orig, void *output,
> + unsigned long output_len)
> {
> int *reloc;
> unsigned long delta, map, ptr;
> @@ -247,7 +248,7 @@ static void handle_relocations(void *out
> * Calculate the delta between where vmlinux was linked to load
> * and where it was actually loaded.
> */
> - delta = min_addr - LOAD_PHYSICAL_ADDR;
> + delta = min_addr - (unsigned long)output_orig;
> if (!delta) {
> debug_putstr("No relocation needed... ");
> return;
> @@ -304,7 +305,8 @@ static void handle_relocations(void *out
> #endif
> }
> #else
> -static inline void handle_relocations(void *output, unsigned long output_len)
> +static inline void handle_relocations(void *output_orig, void *output,
> + unsigned long output_len)
> { }
> #endif
>
> @@ -365,6 +367,8 @@ asmlinkage void *decompress_kernel(void
> unsigned char *output,
> unsigned long output_len)
> {
> + unsigned char *output_orig = output;
> +
> real_mode = rmode;
>
> sanitize_boot_params(real_mode);
> @@ -417,7 +421,7 @@ asmlinkage void *decompress_kernel(void
> debug_putstr("... ");
> decompress(input_data, input_len, NULL, NULL, output, NULL, error);
> parse_elf(output);
> - handle_relocations(output, output_len);
> + handle_relocations(output_orig, output, output_len);
> debug_putstr("done.\nBooting the kernel.\n");
> return output;
> }
Thanks for the patch, it works for me :)
I also have a draft patch with the same idea as Yinghai. But I take a
slightly different approach:
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 1768461..7f392a8 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -360,6 +360,8 @@ asmlinkage void *decompress_kernel(void *rmode, memptr heap,
unsigned char *output,
unsigned long output_len)
{
+ char *output_orig;
+
real_mode = rmode;
sanitize_boot_params(real_mode);
@@ -381,6 +383,7 @@ asmlinkage void *decompress_kernel(void *rmode, memptr heap,
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ output_orig = output;
output = choose_kernel_location(input_data, input_len,
output, output_len);
@@ -402,7 +405,10 @@ asmlinkage void *decompress_kernel(void *rmode, memptr heap,
debug_putstr("\nDecompressing Linux... ");
decompress(input_data, input_len, NULL, NULL, output, NULL, error);
parse_elf(output);
- handle_relocations(output, output_len);
+
+ if (output != output_orig)
+ handle_relocations(output, output_len);
+
debug_putstr("done.\nBooting the kernel.\n");
return output;
}
Thanks
WANG Chao
On Mon, Apr 21, 2014 at 10:28 PM, WANG Chao <[email protected]> wrote:
> On 04/21/14 at 09:58pm, Yinghai Lu wrote:
>> On Mon, Apr 21, 2014 at 8:16 PM, WANG Chao <[email protected]> wrote:
>> > On 04/21/14 at 11:01am, Kees Cook wrote:
>> >> On Mon, Apr 21, 2014 at 10:56 AM, Yinghai Lu <[email protected]> wrote:
>> >> > On Mon, Apr 21, 2014 at 3:52 AM, WANG Chao <[email protected]> wrote:
>> >> >> Hi, Kees
>> >> >>
>> >> >> When I'm testing kaslr with kdump, I find that when 2nd kernel is loaded
>> >> >> high, it doesn't boot.
>> >> >>
>> >> >> I reserved 128M memory at high with kernel cmdline
>> >> >> "crashkernel=128M,high crashkernel=0,low", and for which I got:
>> >> >>
>> >> >> [ 0.000000] Reserving 128MB of memory at 6896MB for crashkernel (System RAM: 6013MB)
>> >> >>
>> >> >> Then I load kdump kernel into the reserved memory region, using a local
>> >> >> modified kexec-tools which is passing e820 in boot_params.
>> >> >>
>> >> >> The e820 map of system RAM passed to 2nd kernel:
>> >> >>
>> >> >> E820 memmap (of RAM):
>> >> >> 0000000000001000-000000000009e3ff (1)
>> >> >> 00000001af000000-00000001b6f5dfff (1)
>> >> >> 00000001b6fff400-00000001b6ffffff (1)
>> >> >>
>> >> >> In which, 2nd kernel is loaded at 0x1b5000000.
>> >> >>
>> >> >> After triggerred a system crash, 2nd kernel doesn't boot even with
>> >> >> "nokaslr" cmdline:
>> >> >>
>> >> >> # echo c > /proc/sysrq-trigger
>> >> >> [..]
>> >> >>
>> >> >> I'm in purgatory
>> >> >> early console in decompress_kernel
>> >> >> KASLR disabled...
>> >> >>
>> >> >> Decompressing Linux... Parsing ELF... Performing relocations...
>> >> >>
>> >> >> 32-bit relocation outside of kernel!
>> >> >
>> >> > Interesting, when kernel get at "early console in decompress_kernel"
>> >> > kernel already in 64 bit...
>> >> >
>> >> > what does it mean "32-bit relocation outside of kernel" ?
>> >> >
>> >> > why 32-bit is involved ?
>> >>
>> >> The 64-bit kernel has both 64 and 32 bit relocations (there are two
>> >> tables at the end of the kernel image). The error means that the
>> >> resulting relocation is believed to be outside the kernel image:
>> >>
>> >> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/x86/boot/compressed/misc.c#n283
>> >>
>> >> Which means there is likely something wrong with this calculation in
>> >> your situation:
>> >>
>> >> /*
>> >> * Calculate the delta between where vmlinux was linked to load
>> >> * and where it was actually loaded.
>> >> */
>> >> delta = min_addr - LOAD_PHYSICAL_ADDR;
>> >>
>> >
>> > Probably.
>>
>> Please check attached that patch that will solve nokaslr.
>>
>> Somehow I got "KASLR could not find suitable E820 region..."
>> so i only have "No relocation needed"
>
> I think it makes sense. If output from choose_kernel_location() doesn't
> change (output == output_orig), we shouldn't call relocation code.
>
> There are two situations that makes output == output_orig:
> - "nokaslr" case
> - "KASLR could not find suitable E820 region" case.
>
>>
>> will check that later.
>
>> ---
>> arch/x86/boot/compressed/misc.c | 14 +++++++++-----
>> 1 file changed, 9 insertions(+), 5 deletions(-)
>>
>> Index: linux-2.6/arch/x86/boot/compressed/misc.c
>> ===================================================================
>> --- linux-2.6.orig/arch/x86/boot/compressed/misc.c
>> +++ linux-2.6/arch/x86/boot/compressed/misc.c
>> @@ -235,8 +235,9 @@ static void error(char *x)
>> asm("hlt");
>> }
>>
>> -#if CONFIG_X86_NEED_RELOCS
>> -static void handle_relocations(void *output, unsigned long output_len)
>> +#ifdef CONFIG_X86_NEED_RELOCS
>> +static void handle_relocations(void *output_orig, void *output,
>> + unsigned long output_len)
>> {
>> int *reloc;
>> unsigned long delta, map, ptr;
>> @@ -247,7 +248,7 @@ static void handle_relocations(void *out
>> * Calculate the delta between where vmlinux was linked to load
>> * and where it was actually loaded.
>> */
>> - delta = min_addr - LOAD_PHYSICAL_ADDR;
>> + delta = min_addr - (unsigned long)output_orig;
>> if (!delta) {
>> debug_putstr("No relocation needed... ");
>> return;
>> @@ -304,7 +305,8 @@ static void handle_relocations(void *out
>> #endif
>> }
>> #else
>> -static inline void handle_relocations(void *output, unsigned long output_len)
>> +static inline void handle_relocations(void *output_orig, void *output,
>> + unsigned long output_len)
>> { }
>> #endif
>>
>> @@ -365,6 +367,8 @@ asmlinkage void *decompress_kernel(void
>> unsigned char *output,
>> unsigned long output_len)
>> {
>> + unsigned char *output_orig = output;
>> +
>> real_mode = rmode;
>>
>> sanitize_boot_params(real_mode);
>> @@ -417,7 +421,7 @@ asmlinkage void *decompress_kernel(void
>> debug_putstr("... ");
>> decompress(input_data, input_len, NULL, NULL, output, NULL, error);
>> parse_elf(output);
>> - handle_relocations(output, output_len);
>> + handle_relocations(output_orig, output, output_len);
>> debug_putstr("done.\nBooting the kernel.\n");
>> return output;
>> }
>
> Thanks for the patch, it works for me :)
>
> I also have a draft patch with the same idea as Yinghai. But I take a
> slightly different approach:
>
> diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
> index 1768461..7f392a8 100644
> --- a/arch/x86/boot/compressed/misc.c
> +++ b/arch/x86/boot/compressed/misc.c
> @@ -360,6 +360,8 @@ asmlinkage void *decompress_kernel(void *rmode, memptr heap,
> unsigned char *output,
> unsigned long output_len)
> {
> + char *output_orig;
> +
> real_mode = rmode;
>
> sanitize_boot_params(real_mode);
> @@ -381,6 +383,7 @@ asmlinkage void *decompress_kernel(void *rmode, memptr heap,
> free_mem_ptr = heap; /* Heap */
> free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
>
> + output_orig = output;
> output = choose_kernel_location(input_data, input_len,
> output, output_len);
>
> @@ -402,7 +405,10 @@ asmlinkage void *decompress_kernel(void *rmode, memptr heap,
> debug_putstr("\nDecompressing Linux... ");
> decompress(input_data, input_len, NULL, NULL, output, NULL, error);
> parse_elf(output);
> - handle_relocations(output, output_len);
> +
> + if (output != output_orig)
> + handle_relocations(output, output_len);
> +
> debug_putstr("done.\nBooting the kernel.\n");
> return output;
> }
I would like to fix this in handle_relocations instead, since then it
should be obvious why the math isn't working out.
As for "KASLR could not find suitable E820 region", that's due to the
passed e820 regions not being usable (either not big enough or above
CONFIG_RANDOMIZE_BASE_MAX_OFFSET).
It sounds like the math in handle_relocations is doing the wrong thing
for values >2G, due to the relocations being stored as 32-bit. Perhaps
detection of "output > MAX_INT" is needed to adjust things during the
relocation loops?
Separately, it might be interesting to improve choose_kernel_location
to deal with >2G positions. Right now it avoids it due to the lack of
page table identity mappings above 2G. However that limitation may be
mitigated in your use-case.
-Kees
--
Kees Cook
Chrome OS Security