Introduce XIP (eXecute In Place) support for RISC-V platforms.
It allows code to be executed directly from non-volatile storage
directly addressable by the CPU, such as QSPI NOR flash which can
be found on many RISC-V platforms. This makes way for significant
optimization of RAM footprint. The XIP kernel is not compressed
since it has to run directly from flash, so it will occupy more
space on the non-volatile storage to The physical flash address
used to link the kernel object files and for storing it has to
be known at compile time and is represented by a Kconfig option.
XIP on RISC-V will currently only work on MMU-enabled kernels.
Changed in v2:
- dedicated macro for XIP address fixup when MMU is not enabled yet
o both for 32-bit and 64-bit RISC-V
- SP is explicitly set to a safe place in RAM before __copy_data call
- removed redundant alignment requirements in vmlinux-xip.lds.S
- changed long -> uintptr_t typecast in __XIP_FIXUP macro.
Changed in v3:
- rebased against latest for-next
- XIP address fixup macro now takes an argument
- SMP related fixes
Signed-off-by: Vitaly Wool <[email protected]>
---
arch/riscv/Kconfig | 46 ++++++++-
arch/riscv/Makefile | 8 +-
arch/riscv/boot/Makefile | 13 +++
arch/riscv/include/asm/pgtable.h | 56 +++++++++--
arch/riscv/kernel/cpu_ops_sbi.c | 3 +
arch/riscv/kernel/head.S | 69 +++++++++++++-
arch/riscv/kernel/head.h | 3 +
arch/riscv/kernel/setup.c | 8 +-
arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++
arch/riscv/kernel/vmlinux.lds.S | 6 ++
arch/riscv/mm/init.c | 142 +++++++++++++++++++++++++---
11 files changed, 460 insertions(+), 26 deletions(-)
create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 2b41f6d8e458..fabafdf763da 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -398,7 +398,7 @@ config EFI_STUB
config EFI
bool "UEFI runtime support"
- depends on OF
+ depends on OF && !XIP_KERNEL
select LIBFDT
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
@@ -415,12 +415,52 @@ config EFI
allow the kernel to be booted as an EFI application. This
is only useful on systems that have UEFI firmware.
+config XIP_KERNEL
+ bool "Kernel Execute-In-Place from ROM"
+ depends on MMU
+ help
+ Execute-In-Place allows the kernel to run from non-volatile storage
+ directly addressable by the CPU, such as NOR flash. This saves RAM
+ space since the text section of the kernel is not loaded from flash
+ to RAM. Read-write sections, such as the data section and stack,
+ are still copied to RAM. The XIP kernel is not compressed since
+ it has to run directly from flash, so it will take more space to
+ store it. The flash address used to link the kernel object files,
+ and for storing it, is configuration dependent. Therefore, if you
+ say Y here, you must know the proper physical address where to
+ store the kernel image depending on your own flash memory usage.
+
+ Also note that the make target becomes "make xipImage" rather than
+ "make zImage" or "make Image". The final kernel binary to put in
+ ROM memory will be arch/riscv/boot/xipImage.
+
+ If unsure, say N.
+
+config XIP_PHYS_ADDR
+ hex "XIP Kernel Physical Location"
+ depends on XIP_KERNEL
+ default "0x21000000"
+ help
+ This is the physical address in your flash memory the kernel will
+ be linked for and stored to. This address is dependent on your
+ own flash usage.
+
+config XIP_PHYS_RAM_BASE
+ hex "Platform Physical RAM address"
+ depends on XIP_KERNEL
+ default "0x80000000"
+ help
+ This is the physical address of RAM in the system. It has to be
+ explicitly specified to run early relocations of read-write data
+ from flash to RAM.
endmenu
config BUILTIN_DTB
- def_bool n
- depends on RISCV_M_MODE
+ bool
+ depends on (RISCV_M_MODE || XIP_KERNEL)
depends on OF
+ default y if XIP_KERNEL
+ default n if !XIP_KERNEL
menu "Power management options"
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 8c29e553ef7f..b89b6897b0be 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -70,7 +70,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
# Default target when executing plain make
boot := arch/riscv/boot
+ifeq ($(CONFIG_XIP_KERNEL),y)
+KBUILD_IMAGE := $(boot)/xipImage
+else
KBUILD_IMAGE := $(boot)/Image.gz
+endif
head-y := arch/riscv/kernel/head.o
@@ -83,12 +87,14 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
KBUILD_IMAGE := $(boot)/loader.bin
else
KBUILD_IMAGE := $(boot)/Image.gz
endif
-BOOT_TARGETS := Image Image.gz loader loader.bin
+endif
+BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
all: $(notdir $(KBUILD_IMAGE))
diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
index 03404c84f971..6bf299f70c27 100644
--- a/arch/riscv/boot/Makefile
+++ b/arch/riscv/boot/Makefile
@@ -17,8 +17,21 @@
KCOV_INSTRUMENT := n
OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
+OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
targets := Image Image.* loader loader.o loader.lds loader.bin
+targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
+
+ifeq ($(CONFIG_XIP_KERNEL),y)
+
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+
+$(obj)/xipImage: vmlinux FORCE
+ $(call if_changed,mkxip)
+ @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
+
+endif
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 183f1f4b2ae6..ec3360363b71 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -11,6 +11,42 @@
#include <asm/pgtable-bits.h>
+#ifdef CONFIG_MMU
+
+#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
+#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
+
+#ifdef CONFIG_XIP_KERNEL
+/*
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_OFFSET SZ_8M
+#define XIP_MASK (SZ_8M - 1)
+#define XIP_VIRT_ADDR(physaddr) (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
+#define XIP_PHYS_ADDR(va) \
+ ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
+#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
+
+#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#define __PHYS_RAM_BASE CONFIG_XIP_PHYS_RAM_BASE
+
+#define __XIP_FIXUP(addr) \
+ (((uintptr_t)(addr) >= CONFIG_XIP_PHYS_ADDR && \
+ (uintptr_t)(addr) <= CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
+ (uintptr_t)(addr) - CONFIG_XIP_PHYS_ADDR + __PHYS_RAM_BASE - XIP_OFFSET : \
+ (uintptr_t)(addr))
+
+#else
+#define VMALLOC_END (PAGE_OFFSET - 1)
+#endif /* CONFIG_XIP_KERNEL */
+
+#else
+
+#define XIP_VIRT_ADDR(physaddr) physaddr
+
+#endif /* CONFIG_MMU */
+
#ifndef __ASSEMBLY__
/* Page Upper Directory not used in RISC-V */
@@ -21,10 +57,6 @@
#ifdef CONFIG_MMU
-#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
-#define VMALLOC_END (PAGE_OFFSET - 1)
-#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
-
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
@@ -467,8 +499,20 @@ static inline void __kernel_map_pages(struct page *page, int numpages, int enabl
#define kern_addr_valid(addr) (1) /* FIXME */
-extern void *dtb_early_va;
-extern uintptr_t dtb_early_pa;
+extern void *_dtb_early_va;
+extern uintptr_t _dtb_early_pa;
+#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
+
+#define dtb_early_va (*(void **)__XIP_FIXUP(&_dtb_early_va))
+#define dtb_early_pa (*(uintptr_t *)__XIP_FIXUP(&_dtb_early_pa))
+
+#else
+
+#define dtb_early_va _dtb_early_va
+#define dtb_early_pa _dtb_early_pa
+
+#endif /* CONFIG_XIP_KERNEL */
+
void setup_bootmem(void);
void paging_init(void);
diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
index 685fae72b7f5..9c8d6dab55b8 100644
--- a/arch/riscv/kernel/cpu_ops_sbi.c
+++ b/arch/riscv/kernel/cpu_ops_sbi.c
@@ -59,6 +59,9 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
int hartid = cpuid_to_hartid_map(cpuid);
+#ifdef CONFIG_XIP_KERNEL
+ boot_addr = XIP_PHYS_ADDR(secondary_start_sbi);
+#endif
cpu_update_secondary_bootdata(cpuid, tidle);
rc = sbi_hsm_hart_start(hartid, boot_addr, 0);
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 45dbdae930bf..6f065a5502d3 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -9,11 +9,31 @@
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/page.h>
+#include <asm/pgtable.h>
#include <asm/csr.h>
#include <asm/hwcap.h>
#include <asm/image.h>
#include "efi-header.S"
+#ifdef CONFIG_XIP_KERNEL
+.macro XIP_FIXUP_OFFSET reg
+#ifdef CONFIG_64BIT
+ ld t0, _xip_fixup
+#else
+ lw t0, _xip_fixup
+#endif
+ add \reg, \reg, t0
+.endm
+
+_xip_fixup:
+#ifdef CONFIG_64BIT
+ .dword CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
+#else
+ .word CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
+#endif
+
+#endif /* CONFIG_XIP_KERNEL */
+
__HEAD
ENTRY(_start)
/*
@@ -64,7 +84,11 @@ pe_head_start:
#ifdef CONFIG_MMU
relocate:
/* Relocate return address */
+#ifdef CONFIG_XIP_KERNEL
+ li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#else
li a1, PAGE_OFFSET
+#endif
la a2, _start
sub a1, a1, a2
add ra, ra, a1
@@ -85,7 +109,12 @@ relocate:
* full fence here because setup_vm() just wrote these PTEs and we need
* to ensure the new translations are in use.
*/
+#ifdef CONFIG_XIP_KERNEL
+ la a0, _trampoline_pg_dir
+ XIP_FIXUP_OFFSET a0
+#else
la a0, trampoline_pg_dir
+#endif
srl a0, a0, PAGE_SHIFT
or a0, a0, a1
sfence.vma
@@ -140,6 +169,10 @@ secondary_start_sbi:
slli a3, a0, LGREG
la a4, __cpu_up_stack_pointer
la a5, __cpu_up_task_pointer
+#ifdef CONFIG_XIP_KERNEL
+ XIP_FIXUP_OFFSET a4
+ XIP_FIXUP_OFFSET a5
+#endif
add a4, a3, a4
add a5, a3, a5
REG_L sp, (a4)
@@ -233,10 +266,24 @@ pmp_done:
/* Pick one hart to run the main boot sequence */
la a3, hart_lottery
+#ifdef CONFIG_XIP_KERNEL
+ XIP_FIXUP_OFFSET a3
+#endif
li a2, 1
amoadd.w a3, a2, (a3)
bnez a3, .Lsecondary_start
+#ifdef CONFIG_XIP_KERNEL
+ la sp, _end + THREAD_SIZE
+ XIP_FIXUP_OFFSET sp
+ mv s0, a0
+ call __copy_data
+
+ /* Restore a0 copy */
+ mv a0, s0
+#endif
+
+#ifndef CONFIG_XIP_KERNEL
/* Clear BSS for flat non-ELF images */
la a3, __bss_start
la a4, __bss_stop
@@ -246,19 +293,35 @@ clear_bss:
add a3, a3, RISCV_SZPTR
blt a3, a4, clear_bss
clear_bss_done:
-
+#endif
/* Save hart ID and DTB physical address */
mv s0, a0
mv s1, a1
+
la a2, boot_cpu_hartid
+#ifdef CONFIG_XIP_KERNEL
+ XIP_FIXUP_OFFSET a2
+#endif
REG_S a0, (a2)
/* Initialize page tables and relocate to virtual addresses */
la sp, init_thread_union + THREAD_SIZE
+#ifdef CONFIG_XIP_KERNEL
+ XIP_FIXUP_OFFSET sp
+#endif
+#if defined (CONFIG_XIP_KERNEL) && defined (CONFIG_BUILTIN_DTB)
+ la a0, __dtb_start
+#else
mv a0, s1
+#endif
call setup_vm
#ifdef CONFIG_MMU
+#ifdef CONFIG_XIP_KERNEL
+ la a0, _early_pg_dir
+ XIP_FIXUP_OFFSET a0
+#else
la a0, early_pg_dir
+#endif
call relocate
#endif /* CONFIG_MMU */
@@ -284,6 +347,10 @@ clear_bss_done:
slli a3, a0, LGREG
la a1, __cpu_up_stack_pointer
la a2, __cpu_up_task_pointer
+#ifdef CONFIG_XIP_KERNEL
+ XIP_FIXUP_OFFSET a1
+ XIP_FIXUP_OFFSET a2
+#endif
add a1, a3, a1
add a2, a3, a2
diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
index b48dda3d04f6..aabbc3ac3e48 100644
--- a/arch/riscv/kernel/head.h
+++ b/arch/riscv/kernel/head.h
@@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
asmlinkage void do_page_fault(struct pt_regs *regs);
asmlinkage void __init setup_vm(uintptr_t dtb_pa);
+#ifdef CONFIG_XIP_KERNEL
+asmlinkage void __init __copy_data(void);
+#endif
extern void *__cpu_up_stack_pointer[];
extern void *__cpu_up_task_pointer[];
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index a834deab31d3..876d4ff0ecc4 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
* This is used before the kernel initializes the BSS so it can't be in the
* BSS.
*/
-atomic_t hart_lottery __section(".sdata");
+atomic_t hart_lottery __section(".sdata")
+#ifdef CONFIG_XIP_KERNEL
+= ATOMIC_INIT(1)
+#endif
+;
unsigned long boot_cpu_hartid;
static DEFINE_PER_CPU(struct cpu, cpu_devices);
@@ -244,7 +248,7 @@ void __init setup_arch(char **cmdline_p)
#if IS_ENABLED(CONFIG_BUILTIN_DTB)
unflatten_and_copy_device_tree();
#else
- if (early_init_dt_verify(__va(dtb_early_pa)))
+ if (early_init_dt_verify(dtb_early_va))
unflatten_device_tree();
else
pr_err("No DTB found in kernel mappings\n");
diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
new file mode 100644
index 000000000000..9f0f08c34cd3
--- /dev/null
+++ b/arch/riscv/kernel/vmlinux-xip.lds.S
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ * Copyright (C) 2020 Vitaly Wool, Konsulko AB
+ */
+
+#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
+#include <asm/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+OUTPUT_ARCH(riscv)
+ENTRY(_start)
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+ /* Beginning of code and text segment */
+ . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+ _xiprom = .;
+ _start = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.text :
+ {
+ EXIT_TEXT
+ }
+
+ .text : {
+ _text = .;
+ _stext = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ CPUIDLE_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ ENTRY_TEXT
+ IRQENTRY_TEXT
+ SOFTIRQENTRY_TEXT
+ *(.fixup)
+ _etext = .;
+ }
+ RO_DATA(L1_CACHE_BYTES)
+ .srodata : {
+ *(.srodata*)
+ }
+ .init.rodata : {
+ INIT_SETUP(16)
+ INIT_CALLS
+ CON_INITCALL
+ INIT_RAM_FS
+ }
+ _exiprom = .; /* End of XIP ROM area */
+
+
+/*
+ * From this point, stuff is considered writable and will be copied to RAM
+ */
+ __data_loc = ALIGN(16); /* location in file */
+ . = PAGE_OFFSET; /* location in memory */
+
+ _sdata = .; /* Start of data section */
+ _data = .;
+ RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+ __start_ro_after_init = .;
+ .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
+ *(.data..ro_after_init)
+ }
+ __end_ro_after_init = .;
+
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ .init.data : {
+ INIT_DATA
+ }
+ .exit.data : {
+ EXIT_DATA
+ }
+ . = ALIGN(8);
+ __soc_early_init_table : {
+ __soc_early_init_table_start = .;
+ KEEP(*(__soc_early_init_table))
+ __soc_early_init_table_end = .;
+ }
+ __soc_builtin_dtb_table : {
+ __soc_builtin_dtb_table_start = .;
+ KEEP(*(__soc_builtin_dtb_table))
+ __soc_builtin_dtb_table_end = .;
+ }
+ PERCPU_SECTION(L1_CACHE_BYTES)
+
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+ .sdata : {
+ __global_pointer$ = . + 0x800;
+ *(.sdata*)
+ *(.sbss*)
+ }
+
+ BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
+ EXCEPTION_TABLE(0x10)
+
+ .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
+ *(.rel.dyn*)
+ }
+
+ /*
+ * End of copied data. We need a dummy section to get its LMA.
+ * Also located before final ALIGN() as trailing padding is not stored
+ * in the resulting binary file and useless to copy.
+ */
+ .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
+ _edata_loc = LOADADDR(.data.endmark);
+
+ . = ALIGN(PAGE_SIZE);
+ _end = .;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ DISCARDS
+}
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index de03cb22d0e9..6745ec325930 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -4,7 +4,12 @@
* Copyright (C) 2017 SiFive
*/
+#ifdef CONFIG_XIP_KERNEL
+#include "vmlinux-xip.lds.S"
+#else
+
#define LOAD_OFFSET PAGE_OFFSET
+
#include <asm/vmlinux.lds.h>
#include <asm/page.h>
#include <asm/cache.h>
@@ -132,3 +137,4 @@ SECTIONS
DISCARDS
}
+#endif /* CONFIG_XIP_KERNEL */
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 87c305c566ac..8636432400df 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -30,8 +30,8 @@ EXPORT_SYMBOL(empty_zero_page);
extern char _start[];
#define DTB_EARLY_BASE_VA PGDIR_SIZE
-void *dtb_early_va __initdata;
-uintptr_t dtb_early_pa __initdata;
+void *_dtb_early_va __initdata;
+uintptr_t _dtb_early_pa __initdata;
struct pt_alloc_ops {
pte_t *(*get_pte_virt)(phys_addr_t pa);
@@ -87,6 +87,10 @@ static void print_vm_layout(void)
(unsigned long)VMALLOC_END);
print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
(unsigned long)high_memory);
+#ifdef CONFIG_XIP_KERNEL
+ print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
+ (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
+#endif /* CONFIG_XIP_KERNEL */
}
#else
static void print_vm_layout(void) { }
@@ -163,6 +167,10 @@ void __init setup_bootmem(void)
phys_addr_t vmlinux_start = __pa_symbol(&_start);
u64 i;
+#ifdef CONFIG_XIP_KERNEL
+ vmlinux_start = __pa_symbol(&_sdata);
+#endif
+
/* Find the memory region containing the kernel */
for_each_mem_range(i, &start, &end) {
phys_addr_t size = end - start;
@@ -194,11 +202,18 @@ void __init setup_bootmem(void)
setup_initrd();
#endif /* CONFIG_BLK_DEV_INITRD */
- /*
- * Avoid using early_init_fdt_reserve_self() since __pa() does
- * not work for DTB pointers that are fixmap addresses
- */
- memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
+#ifdef CONFIG_XIP_KERNEL
+ if (dtb_early_pa < CONFIG_XIP_PHYS_ADDR ||
+ dtb_early_pa > CONFIG_XIP_PHYS_ADDR + SZ_16M)
+#endif
+ {
+ /*
+ * Avoid using early_init_fdt_reserve_self() since __pa() does
+ * not work for DTB pointers that are fixmap addresses
+ */
+ memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
+ dtb_early_va = __va(dtb_early_pa);
+ }
early_init_fdt_scan_reserved_mem();
dma_contiguous_reserve(dma32_phys_limit);
@@ -206,21 +221,47 @@ void __init setup_bootmem(void)
memblock_dump_all();
}
+#ifdef CONFIG_XIP_KERNEL
+
+extern char _xiprom[], _exiprom[];
+extern char _sdata[], _edata[];
+
+#endif /* CONFIG_XIP_KERNEL */
+
#ifdef CONFIG_MMU
-static struct pt_alloc_ops pt_ops;
+static struct pt_alloc_ops _pt_ops;
+
+#ifdef CONFIG_XIP_KERNEL
+#define pt_ops (*(struct pt_alloc_ops *)__XIP_FIXUP(&_pt_ops))
+#else
+#define pt_ops _pt_ops
+#endif
unsigned long va_pa_offset;
EXPORT_SYMBOL(va_pa_offset);
+#ifdef CONFIG_XIP_KERNEL
+#define va_pa_offset (*((unsigned long *)__XIP_FIXUP(&va_pa_offset)))
+#endif
unsigned long pfn_base;
EXPORT_SYMBOL(pfn_base);
pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
-pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
-pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
#define MAX_EARLY_MAPPING_SIZE SZ_128M
+#ifdef CONFIG_XIP_KERNEL
+pgd_t _trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
+pte_t _fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
+pgd_t _early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+
+#define trampoline_pg_dir ((pgd_t *)__XIP_FIXUP(_trampoline_pg_dir))
+#define fixmap_pte ((pte_t *)__XIP_FIXUP(_fixmap_pte))
+#define early_pg_dir ((pgd_t *)__XIP_FIXUP(_early_pg_dir))
+#else
+pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
+pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
+#endif /* CONFIG_XIP_KERNEL */
void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
{
@@ -292,15 +333,27 @@ static void __init create_pte_mapping(pte_t *ptep,
#ifndef __PAGETABLE_PMD_FOLDED
-pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
-pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
-
#if MAX_EARLY_MAPPING_SIZE < PGDIR_SIZE
#define NUM_EARLY_PMDS 1UL
#else
#define NUM_EARLY_PMDS (1UL + MAX_EARLY_MAPPING_SIZE / PGDIR_SIZE)
#endif
+
+#ifdef CONFIG_XIP_KERNEL
+pmd_t _trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
+pmd_t _fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
+pmd_t _xip_pmd[PTRS_PER_PGD * NUM_EARLY_PMDS] __page_aligned_bss;
+pmd_t _early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
+
+#define trampoline_pmd ((pmd_t *)__XIP_FIXUP(_trampoline_pmd))
+#define fixmap_pmd ((pmd_t *)__XIP_FIXUP(_fixmap_pmd))
+#define xip_pmd ((pmd_t *)__XIP_FIXUP(_xip_pmd))
+#define early_pmd ((pmd_t *)__XIP_FIXUP(_early_pmd))
+#else
+pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
+pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
pmd_t early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
+#endif
static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
{
@@ -420,6 +473,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
return PMD_SIZE;
}
+#ifdef CONFIG_XIP_KERNEL
+/* called from head.S with MMU off */
+asmlinkage void __init __copy_data(void)
+{
+ void *from = (void *)(&_sdata);
+ void *end = (void *)(&_end);
+ void *to = (void *)CONFIG_XIP_PHYS_RAM_BASE;
+ size_t sz = (size_t)(end - from);
+
+ memcpy(to, from, sz);
+}
+#endif
+
/*
* setup_vm() is called from head.S with MMU-off.
*
@@ -448,6 +514,19 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
pmd_t fix_bmap_spmd, fix_bmap_epmd;
#endif
+#ifdef CONFIG_XIP_KERNEL
+ uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
+ uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
+ uintptr_t xip_map_size = best_map_size(xiprom,
+ MAX_EARLY_MAPPING_SIZE);
+
+ BUG_ON((xiprom % xip_map_size) != 0);
+ BUG_ON(xiprom_sz > MAX_EARLY_MAPPING_SIZE);
+
+ load_pa = (uintptr_t)CONFIG_XIP_PHYS_RAM_BASE;
+ load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
+ map_size = best_map_size(load_pa, MAX_EARLY_MAPPING_SIZE);
+#endif
va_pa_offset = PAGE_OFFSET - load_pa;
pfn_base = PFN_DOWN(load_pa);
@@ -487,6 +566,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
#endif
+#ifdef CONFIG_XIP_KERNEL
+ create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
+ (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
+ for (va = XIP_VIRT_ADDR_START;
+ va < XIP_VIRT_ADDR_START + xiprom_sz;
+ va += PMD_SIZE) {
+ create_pmd_mapping(xip_pmd, va,
+ xiprom + (va - XIP_VIRT_ADDR_START),
+ PMD_SIZE, PAGE_KERNEL_EXEC);
+ }
+
+ create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
+ (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
+#endif
+
/*
* Setup early PGD covering entire kernel which will allows
* us to reach paging_init(). We map all memory banks later
@@ -543,6 +637,9 @@ static void __init setup_vm_final(void)
uintptr_t va, map_size;
phys_addr_t pa, start, end;
u64 i;
+#ifdef CONFIG_XIP_KERNEL
+ uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
+#endif
/**
* MMU is enabled at this point. But page table setup is not complete yet.
@@ -574,6 +671,25 @@ static void __init setup_vm_final(void)
map_size, PAGE_KERNEL_EXEC);
}
}
+#ifdef CONFIG_XIP_KERNEL
+ for (va = XIP_VIRT_ADDR_START;
+ va < XIP_VIRT_ADDR_START + xiprom_sz;
+ va += PMD_SIZE)
+ create_pgd_mapping(swapper_pg_dir, va,
+ CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
+ PMD_SIZE, PAGE_KERNEL_EXEC);
+
+ /* if DT is in NOR, keep the early mapping */
+ if (dtb_early_pa >= CONFIG_XIP_PHYS_ADDR &&
+ dtb_early_pa <= CONFIG_XIP_PHYS_ADDR + SZ_16M) {
+ pa = dtb_early_pa & ~(PGDIR_SIZE - 1);
+ va = DTB_EARLY_BASE_VA;
+ create_pgd_mapping(swapper_pg_dir, va,
+ pa, PGDIR_SIZE, PAGE_KERNEL);
+ create_pgd_mapping(swapper_pg_dir, va + PGDIR_SIZE,
+ pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
+ }
+#endif
/* Clear fixmap PTE and PMD mappings */
clear_fixmap(FIX_PTE);
--
2.29.2
Hi Vitaly,
On Tue, Dec 22, 2020 at 4:39 AM Vitaly Wool <[email protected]> wrote:
>
> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> It allows code to be executed directly from non-volatile storage
> directly addressable by the CPU, such as QSPI NOR flash which can
> be found on many RISC-V platforms. This makes way for significant
> optimization of RAM footprint. The XIP kernel is not compressed
> since it has to run directly from flash, so it will occupy more
> space on the non-volatile storage to The physical flash address
> used to link the kernel object files and for storing it has to
> be known at compile time and is represented by a Kconfig option.
>
> XIP on RISC-V will currently only work on MMU-enabled kernels.
>
> Changed in v2:
> - dedicated macro for XIP address fixup when MMU is not enabled yet
> o both for 32-bit and 64-bit RISC-V
> - SP is explicitly set to a safe place in RAM before __copy_data call
> - removed redundant alignment requirements in vmlinux-xip.lds.S
> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>
> Changed in v3:
> - rebased against latest for-next
> - XIP address fixup macro now takes an argument
> - SMP related fixes
The above changelogs should go below ---
> Signed-off-by: Vitaly Wool <[email protected]>
> ---
> arch/riscv/Kconfig | 46 ++++++++-
> arch/riscv/Makefile | 8 +-
> arch/riscv/boot/Makefile | 13 +++
> arch/riscv/include/asm/pgtable.h | 56 +++++++++--
> arch/riscv/kernel/cpu_ops_sbi.c | 3 +
> arch/riscv/kernel/head.S | 69 +++++++++++++-
> arch/riscv/kernel/head.h | 3 +
> arch/riscv/kernel/setup.c | 8 +-
> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++
> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> arch/riscv/mm/init.c | 142 +++++++++++++++++++++++++---
> 11 files changed, 460 insertions(+), 26 deletions(-)
> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>
Regards,
Bin
On Tue, Dec 22, 2020 at 2:08 AM Vitaly Wool <[email protected]> wrote:
>
> Introduce XIP (eXecute In Place) support for RISC-V platforms.
> It allows code to be executed directly from non-volatile storage
> directly addressable by the CPU, such as QSPI NOR flash which can
> be found on many RISC-V platforms. This makes way for significant
> optimization of RAM footprint. The XIP kernel is not compressed
> since it has to run directly from flash, so it will occupy more
> space on the non-volatile storage to The physical flash address
> used to link the kernel object files and for storing it has to
> be known at compile time and is represented by a Kconfig option.
>
> XIP on RISC-V will currently only work on MMU-enabled kernels.
>
> Changed in v2:
> - dedicated macro for XIP address fixup when MMU is not enabled yet
> o both for 32-bit and 64-bit RISC-V
> - SP is explicitly set to a safe place in RAM before __copy_data call
> - removed redundant alignment requirements in vmlinux-xip.lds.S
> - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
>
> Changed in v3:
> - rebased against latest for-next
> - XIP address fixup macro now takes an argument
> - SMP related fixes
> Signed-off-by: Vitaly Wool <[email protected]>
> ---
> arch/riscv/Kconfig | 46 ++++++++-
> arch/riscv/Makefile | 8 +-
> arch/riscv/boot/Makefile | 13 +++
> arch/riscv/include/asm/pgtable.h | 56 +++++++++--
> arch/riscv/kernel/cpu_ops_sbi.c | 3 +
> arch/riscv/kernel/head.S | 69 +++++++++++++-
> arch/riscv/kernel/head.h | 3 +
> arch/riscv/kernel/setup.c | 8 +-
> arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++
> arch/riscv/kernel/vmlinux.lds.S | 6 ++
> arch/riscv/mm/init.c | 142 +++++++++++++++++++++++++---
> 11 files changed, 460 insertions(+), 26 deletions(-)
> create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
If possible please break down this patch into smaller patches
which are bisect-able and easy to reivew.
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 2b41f6d8e458..fabafdf763da 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -398,7 +398,7 @@ config EFI_STUB
>
> config EFI
> bool "UEFI runtime support"
> - depends on OF
> + depends on OF && !XIP_KERNEL
> select LIBFDT
> select UCS2_STRING
> select EFI_PARAMS_FROM_FDT
> @@ -415,12 +415,52 @@ config EFI
> allow the kernel to be booted as an EFI application. This
> is only useful on systems that have UEFI firmware.
>
> +config XIP_KERNEL
> + bool "Kernel Execute-In-Place from ROM"
> + depends on MMU
> + help
> + Execute-In-Place allows the kernel to run from non-volatile storage
> + directly addressable by the CPU, such as NOR flash. This saves RAM
> + space since the text section of the kernel is not loaded from flash
> + to RAM. Read-write sections, such as the data section and stack,
> + are still copied to RAM. The XIP kernel is not compressed since
> + it has to run directly from flash, so it will take more space to
> + store it. The flash address used to link the kernel object files,
> + and for storing it, is configuration dependent. Therefore, if you
> + say Y here, you must know the proper physical address where to
> + store the kernel image depending on your own flash memory usage.
> +
> + Also note that the make target becomes "make xipImage" rather than
> + "make zImage" or "make Image". The final kernel binary to put in
> + ROM memory will be arch/riscv/boot/xipImage.
> +
> + If unsure, say N.
> +
> +config XIP_PHYS_ADDR
> + hex "XIP Kernel Physical Location"
> + depends on XIP_KERNEL
> + default "0x21000000"
> + help
> + This is the physical address in your flash memory the kernel will
> + be linked for and stored to. This address is dependent on your
> + own flash usage.
> +
> +config XIP_PHYS_RAM_BASE
> + hex "Platform Physical RAM address"
> + depends on XIP_KERNEL
> + default "0x80000000"
> + help
> + This is the physical address of RAM in the system. It has to be
> + explicitly specified to run early relocations of read-write data
> + from flash to RAM.
> endmenu
>
> config BUILTIN_DTB
> - def_bool n
> - depends on RISCV_M_MODE
> + bool
> + depends on (RISCV_M_MODE || XIP_KERNEL)
> depends on OF
> + default y if XIP_KERNEL
> + default n if !XIP_KERNEL
The "default n" case is not required because by default it is disabled.
>
> menu "Power management options"
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index 8c29e553ef7f..b89b6897b0be 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -70,7 +70,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
>
> # Default target when executing plain make
> boot := arch/riscv/boot
> +ifeq ($(CONFIG_XIP_KERNEL),y)
> +KBUILD_IMAGE := $(boot)/xipImage
> +else
> KBUILD_IMAGE := $(boot)/Image.gz
> +endif
>
> head-y := arch/riscv/kernel/head.o
>
> @@ -83,12 +87,14 @@ PHONY += vdso_install
> vdso_install:
> $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +ifneq ($(CONFIG_XIP_KERNEL),y)
> ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
> KBUILD_IMAGE := $(boot)/loader.bin
> else
> KBUILD_IMAGE := $(boot)/Image.gz
> endif
> -BOOT_TARGETS := Image Image.gz loader loader.bin
> +endif
> +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
>
> all: $(notdir $(KBUILD_IMAGE))
>
> diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> index 03404c84f971..6bf299f70c27 100644
> --- a/arch/riscv/boot/Makefile
> +++ b/arch/riscv/boot/Makefile
> @@ -17,8 +17,21 @@
> KCOV_INSTRUMENT := n
>
> OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
>
> targets := Image Image.* loader loader.o loader.lds loader.bin
> +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> +
> +ifeq ($(CONFIG_XIP_KERNEL),y)
> +
> +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> +cmd_mkxip = $(cmd_objcopy)
> +
> +$(obj)/xipImage: vmlinux FORCE
> + $(call if_changed,mkxip)
> + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> +
> +endif
>
> $(obj)/Image: vmlinux FORCE
> $(call if_changed,objcopy)
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index 183f1f4b2ae6..ec3360363b71 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -11,6 +11,42 @@
>
> #include <asm/pgtable-bits.h>
>
> +#ifdef CONFIG_MMU
> +
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +#ifdef CONFIG_XIP_KERNEL
> +/*
> + * Since we use sections to map it, this macro replaces the physical address
> + * with its virtual address while keeping offset from the base section.
> + */
> +#define XIP_OFFSET SZ_8M
> +#define XIP_MASK (SZ_8M - 1)
> +#define XIP_VIRT_ADDR(physaddr) (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> +#define XIP_PHYS_ADDR(va) \
> + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> +
> +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +#define __PHYS_RAM_BASE CONFIG_XIP_PHYS_RAM_BASE
> +
> +#define __XIP_FIXUP(addr) \
> + (((uintptr_t)(addr) >= CONFIG_XIP_PHYS_ADDR && \
> + (uintptr_t)(addr) <= CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> + (uintptr_t)(addr) - CONFIG_XIP_PHYS_ADDR + __PHYS_RAM_BASE - XIP_OFFSET : \
> + (uintptr_t)(addr))
> +
> +#else
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +#endif /* CONFIG_XIP_KERNEL */
> +
> +#else
> +
> +#define XIP_VIRT_ADDR(physaddr) physaddr
> +
> +#endif /* CONFIG_MMU */
> +
Lot of defines above will not work for assembly sources.
Keep only assembly friendly defines outside "#ifndef __ASSEMBLY__"
> #ifndef __ASSEMBLY__
>
> /* Page Upper Directory not used in RISC-V */
> @@ -21,10 +57,6 @@
>
> #ifdef CONFIG_MMU
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> -
> #define BPF_JIT_REGION_SIZE (SZ_128M)
> #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> #define BPF_JIT_REGION_END (VMALLOC_END)
> @@ -467,8 +499,20 @@ static inline void __kernel_map_pages(struct page *page, int numpages, int enabl
>
> #define kern_addr_valid(addr) (1) /* FIXME */
>
> -extern void *dtb_early_va;
> -extern uintptr_t dtb_early_pa;
> +extern void *_dtb_early_va;
> +extern uintptr_t _dtb_early_pa;
> +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> +
> +#define dtb_early_va (*(void **)__XIP_FIXUP(&_dtb_early_va))
> +#define dtb_early_pa (*(uintptr_t *)__XIP_FIXUP(&_dtb_early_pa))
> +
> +#else
> +
> +#define dtb_early_va _dtb_early_va
> +#define dtb_early_pa _dtb_early_pa
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> void setup_bootmem(void);
> void paging_init(void);
>
> diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> index 685fae72b7f5..9c8d6dab55b8 100644
> --- a/arch/riscv/kernel/cpu_ops_sbi.c
> +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> @@ -59,6 +59,9 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> int hartid = cpuid_to_hartid_map(cpuid);
>
> +#ifdef CONFIG_XIP_KERNEL
> + boot_addr = XIP_PHYS_ADDR(secondary_start_sbi);
> +#endif
You can avoid "#ifdef CONFIG_XIP_KERNEL" here by defining
XIP_PHYS_ADDR() to do nothing when XIP_KERNEL is disabled.
> cpu_update_secondary_bootdata(cpuid, tidle);
> rc = sbi_hsm_hart_start(hartid, boot_addr, 0);
>
> diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> index 45dbdae930bf..6f065a5502d3 100644
> --- a/arch/riscv/kernel/head.S
> +++ b/arch/riscv/kernel/head.S
> @@ -9,11 +9,31 @@
> #include <linux/linkage.h>
> #include <asm/thread_info.h>
> #include <asm/page.h>
> +#include <asm/pgtable.h>
> #include <asm/csr.h>
> #include <asm/hwcap.h>
> #include <asm/image.h>
> #include "efi-header.S"
>
> +#ifdef CONFIG_XIP_KERNEL
> +.macro XIP_FIXUP_OFFSET reg
> +#ifdef CONFIG_64BIT
> + ld t0, _xip_fixup
> +#else
> + lw t0, _xip_fixup
> +#endif
> + add \reg, \reg, t0
> +.endm
> +
> +_xip_fixup:
> +#ifdef CONFIG_64BIT
> + .dword CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> +#else
> + .word CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> +#endif
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> __HEAD
> ENTRY(_start)
> /*
> @@ -64,7 +84,11 @@ pe_head_start:
> #ifdef CONFIG_MMU
> relocate:
> /* Relocate return address */
> +#ifdef CONFIG_XIP_KERNEL
> + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +#else
> li a1, PAGE_OFFSET
> +#endif
> la a2, _start
> sub a1, a1, a2
> add ra, ra, a1
> @@ -85,7 +109,12 @@ relocate:
> * full fence here because setup_vm() just wrote these PTEs and we need
> * to ensure the new translations are in use.
> */
> +#ifdef CONFIG_XIP_KERNEL
> + la a0, _trampoline_pg_dir
> + XIP_FIXUP_OFFSET a0
> +#else
> la a0, trampoline_pg_dir
> +#endif
> srl a0, a0, PAGE_SHIFT
> or a0, a0, a1
> sfence.vma
> @@ -140,6 +169,10 @@ secondary_start_sbi:
> slli a3, a0, LGREG
> la a4, __cpu_up_stack_pointer
> la a5, __cpu_up_task_pointer
> +#ifdef CONFIG_XIP_KERNEL
> + XIP_FIXUP_OFFSET a4
> + XIP_FIXUP_OFFSET a5
> +#endif
> add a4, a3, a4
> add a5, a3, a5
> REG_L sp, (a4)
> @@ -233,10 +266,24 @@ pmp_done:
>
> /* Pick one hart to run the main boot sequence */
> la a3, hart_lottery
> +#ifdef CONFIG_XIP_KERNEL
> + XIP_FIXUP_OFFSET a3
> +#endif
> li a2, 1
> amoadd.w a3, a2, (a3)
> bnez a3, .Lsecondary_start
>
> +#ifdef CONFIG_XIP_KERNEL
> + la sp, _end + THREAD_SIZE
> + XIP_FIXUP_OFFSET sp
> + mv s0, a0
> + call __copy_data
> +
> + /* Restore a0 copy */
> + mv a0, s0
> +#endif
> +
> +#ifndef CONFIG_XIP_KERNEL
> /* Clear BSS for flat non-ELF images */
> la a3, __bss_start
> la a4, __bss_stop
> @@ -246,19 +293,35 @@ clear_bss:
> add a3, a3, RISCV_SZPTR
> blt a3, a4, clear_bss
> clear_bss_done:
> -
> +#endif
> /* Save hart ID and DTB physical address */
> mv s0, a0
> mv s1, a1
> +
> la a2, boot_cpu_hartid
> +#ifdef CONFIG_XIP_KERNEL
> + XIP_FIXUP_OFFSET a2
> +#endif
> REG_S a0, (a2)
>
> /* Initialize page tables and relocate to virtual addresses */
> la sp, init_thread_union + THREAD_SIZE
> +#ifdef CONFIG_XIP_KERNEL
> + XIP_FIXUP_OFFSET sp
> +#endif
> +#if defined (CONFIG_XIP_KERNEL) && defined (CONFIG_BUILTIN_DTB)
> + la a0, __dtb_start
> +#else
> mv a0, s1
> +#endif
> call setup_vm
> #ifdef CONFIG_MMU
> +#ifdef CONFIG_XIP_KERNEL
> + la a0, _early_pg_dir
> + XIP_FIXUP_OFFSET a0
> +#else
> la a0, early_pg_dir
> +#endif
> call relocate
> #endif /* CONFIG_MMU */
>
> @@ -284,6 +347,10 @@ clear_bss_done:
> slli a3, a0, LGREG
> la a1, __cpu_up_stack_pointer
> la a2, __cpu_up_task_pointer
> +#ifdef CONFIG_XIP_KERNEL
> + XIP_FIXUP_OFFSET a1
> + XIP_FIXUP_OFFSET a2
> +#endif
> add a1, a3, a1
> add a2, a3, a2
>
> diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> index b48dda3d04f6..aabbc3ac3e48 100644
> --- a/arch/riscv/kernel/head.h
> +++ b/arch/riscv/kernel/head.h
> @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
>
> asmlinkage void do_page_fault(struct pt_regs *regs);
> asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> +#ifdef CONFIG_XIP_KERNEL
> +asmlinkage void __init __copy_data(void);
> +#endif
>
> extern void *__cpu_up_stack_pointer[];
> extern void *__cpu_up_task_pointer[];
> diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> index a834deab31d3..876d4ff0ecc4 100644
> --- a/arch/riscv/kernel/setup.c
> +++ b/arch/riscv/kernel/setup.c
> @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> * This is used before the kernel initializes the BSS so it can't be in the
> * BSS.
> */
> -atomic_t hart_lottery __section(".sdata");
> +atomic_t hart_lottery __section(".sdata")
> +#ifdef CONFIG_XIP_KERNEL
> += ATOMIC_INIT(1)
> +#endif
> +;
> unsigned long boot_cpu_hartid;
> static DEFINE_PER_CPU(struct cpu, cpu_devices);
>
> @@ -244,7 +248,7 @@ void __init setup_arch(char **cmdline_p)
> #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> unflatten_and_copy_device_tree();
> #else
> - if (early_init_dt_verify(__va(dtb_early_pa)))
> + if (early_init_dt_verify(dtb_early_va))
We can't use dtb_early_va here because early DTB mappings are only done
in early_pg_dir but not available in swapper_pg_dir.
> unflatten_device_tree();
> else
> pr_err("No DTB found in kernel mappings\n");
> diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
> new file mode 100644
> index 000000000000..9f0f08c34cd3
> --- /dev/null
> +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> @@ -0,0 +1,132 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2012 Regents of the University of California
> + * Copyright (C) 2017 SiFive
> + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> + */
> +
> +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> +/* No __ro_after_init data in the .rodata section - which will always be ro */
> +#define RO_AFTER_INIT_DATA
> +
> +#include <asm/vmlinux.lds.h>
> +#include <asm/page.h>
> +#include <asm/pgtable.h>
> +#include <asm/cache.h>
> +#include <asm/thread_info.h>
> +
> +OUTPUT_ARCH(riscv)
> +ENTRY(_start)
> +
> +jiffies = jiffies_64;
> +
> +SECTIONS
> +{
> + /* Beginning of code and text segment */
> + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> + _xiprom = .;
> + _start = .;
> + HEAD_TEXT_SECTION
> + INIT_TEXT_SECTION(PAGE_SIZE)
> + /* we have to discard exit text and such at runtime, not link time */
> + .exit.text :
> + {
> + EXIT_TEXT
> + }
> +
> + .text : {
> + _text = .;
> + _stext = .;
> + TEXT_TEXT
> + SCHED_TEXT
> + CPUIDLE_TEXT
> + LOCK_TEXT
> + KPROBES_TEXT
> + ENTRY_TEXT
> + IRQENTRY_TEXT
> + SOFTIRQENTRY_TEXT
> + *(.fixup)
> + _etext = .;
> + }
> + RO_DATA(L1_CACHE_BYTES)
> + .srodata : {
> + *(.srodata*)
> + }
> + .init.rodata : {
> + INIT_SETUP(16)
> + INIT_CALLS
> + CON_INITCALL
> + INIT_RAM_FS
> + }
> + _exiprom = .; /* End of XIP ROM area */
> +
> +
> +/*
> + * From this point, stuff is considered writable and will be copied to RAM
> + */
> + __data_loc = ALIGN(16); /* location in file */
> + . = PAGE_OFFSET; /* location in memory */
> +
> + _sdata = .; /* Start of data section */
> + _data = .;
> + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> + _edata = .;
> + __start_ro_after_init = .;
> + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> + *(.data..ro_after_init)
> + }
> + __end_ro_after_init = .;
> +
> + . = ALIGN(PAGE_SIZE);
> + __init_begin = .;
> + .init.data : {
> + INIT_DATA
> + }
> + .exit.data : {
> + EXIT_DATA
> + }
> + . = ALIGN(8);
> + __soc_early_init_table : {
> + __soc_early_init_table_start = .;
> + KEEP(*(__soc_early_init_table))
> + __soc_early_init_table_end = .;
> + }
> + __soc_builtin_dtb_table : {
> + __soc_builtin_dtb_table_start = .;
> + KEEP(*(__soc_builtin_dtb_table))
> + __soc_builtin_dtb_table_end = .;
> + }
> + PERCPU_SECTION(L1_CACHE_BYTES)
> +
> + . = ALIGN(PAGE_SIZE);
> + __init_end = .;
> +
> + .sdata : {
> + __global_pointer$ = . + 0x800;
> + *(.sdata*)
> + *(.sbss*)
> + }
> +
> + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> + EXCEPTION_TABLE(0x10)
> +
> + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> + *(.rel.dyn*)
> + }
> +
> + /*
> + * End of copied data. We need a dummy section to get its LMA.
> + * Also located before final ALIGN() as trailing padding is not stored
> + * in the resulting binary file and useless to copy.
> + */
> + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> + _edata_loc = LOADADDR(.data.endmark);
> +
> + . = ALIGN(PAGE_SIZE);
> + _end = .;
> +
> + STABS_DEBUG
> + DWARF_DEBUG
> +
> + DISCARDS
> +}
Atish's patch series "[PATCH v3 0/5] Improve kernel section protections"
updates vmlinux.lds.S so take that as reference for your vmlinux-xip.lds.S
> diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> index de03cb22d0e9..6745ec325930 100644
> --- a/arch/riscv/kernel/vmlinux.lds.S
> +++ b/arch/riscv/kernel/vmlinux.lds.S
> @@ -4,7 +4,12 @@
> * Copyright (C) 2017 SiFive
> */
>
> +#ifdef CONFIG_XIP_KERNEL
> +#include "vmlinux-xip.lds.S"
> +#else
> +
> #define LOAD_OFFSET PAGE_OFFSET
> +
> #include <asm/vmlinux.lds.h>
> #include <asm/page.h>
> #include <asm/cache.h>
> @@ -132,3 +137,4 @@ SECTIONS
>
> DISCARDS
> }
> +#endif /* CONFIG_XIP_KERNEL */
> diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> index 87c305c566ac..8636432400df 100644
> --- a/arch/riscv/mm/init.c
> +++ b/arch/riscv/mm/init.c
> @@ -30,8 +30,8 @@ EXPORT_SYMBOL(empty_zero_page);
>
> extern char _start[];
> #define DTB_EARLY_BASE_VA PGDIR_SIZE
> -void *dtb_early_va __initdata;
> -uintptr_t dtb_early_pa __initdata;
> +void *_dtb_early_va __initdata;
> +uintptr_t _dtb_early_pa __initdata;
>
> struct pt_alloc_ops {
> pte_t *(*get_pte_virt)(phys_addr_t pa);
> @@ -87,6 +87,10 @@ static void print_vm_layout(void)
> (unsigned long)VMALLOC_END);
> print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> (unsigned long)high_memory);
> +#ifdef CONFIG_XIP_KERNEL
> + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> +#endif /* CONFIG_XIP_KERNEL */
> }
> #else
> static void print_vm_layout(void) { }
> @@ -163,6 +167,10 @@ void __init setup_bootmem(void)
> phys_addr_t vmlinux_start = __pa_symbol(&_start);
> u64 i;
>
> +#ifdef CONFIG_XIP_KERNEL
> + vmlinux_start = __pa_symbol(&_sdata);
> +#endif
> +
> /* Find the memory region containing the kernel */
> for_each_mem_range(i, &start, &end) {
> phys_addr_t size = end - start;
> @@ -194,11 +202,18 @@ void __init setup_bootmem(void)
> setup_initrd();
> #endif /* CONFIG_BLK_DEV_INITRD */
>
> - /*
> - * Avoid using early_init_fdt_reserve_self() since __pa() does
> - * not work for DTB pointers that are fixmap addresses
> - */
> - memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> +#ifdef CONFIG_XIP_KERNEL
> + if (dtb_early_pa < CONFIG_XIP_PHYS_ADDR ||
> + dtb_early_pa > CONFIG_XIP_PHYS_ADDR + SZ_16M)
> +#endif
> + {
> + /*
> + * Avoid using early_init_fdt_reserve_self() since __pa() does
> + * not work for DTB pointers that are fixmap addresses
> + */
> + memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> + dtb_early_va = __va(dtb_early_pa);
Drop this "dtb_early_va" assignment.
> + }
>
> early_init_fdt_scan_reserved_mem();
> dma_contiguous_reserve(dma32_phys_limit);
> @@ -206,21 +221,47 @@ void __init setup_bootmem(void)
> memblock_dump_all();
> }
>
> +#ifdef CONFIG_XIP_KERNEL
> +
> +extern char _xiprom[], _exiprom[];
> +extern char _sdata[], _edata[];
> +
> +#endif /* CONFIG_XIP_KERNEL */
> +
> #ifdef CONFIG_MMU
> -static struct pt_alloc_ops pt_ops;
> +static struct pt_alloc_ops _pt_ops;
> +
> +#ifdef CONFIG_XIP_KERNEL
> +#define pt_ops (*(struct pt_alloc_ops *)__XIP_FIXUP(&_pt_ops))
> +#else
> +#define pt_ops _pt_ops
> +#endif
>
> unsigned long va_pa_offset;
> EXPORT_SYMBOL(va_pa_offset);
> +#ifdef CONFIG_XIP_KERNEL
> +#define va_pa_offset (*((unsigned long *)__XIP_FIXUP(&va_pa_offset)))
> +#endif
> unsigned long pfn_base;
> EXPORT_SYMBOL(pfn_base);
>
> pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> -pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> -pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
>
> #define MAX_EARLY_MAPPING_SIZE SZ_128M
>
> +#ifdef CONFIG_XIP_KERNEL
> +pgd_t _trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> +pte_t _fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> +pgd_t _early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> +
> +#define trampoline_pg_dir ((pgd_t *)__XIP_FIXUP(_trampoline_pg_dir))
> +#define fixmap_pte ((pte_t *)__XIP_FIXUP(_fixmap_pte))
> +#define early_pg_dir ((pgd_t *)__XIP_FIXUP(_early_pg_dir))
> +#else
> +pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> +pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> +#endif /* CONFIG_XIP_KERNEL */
>
> void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> {
> @@ -292,15 +333,27 @@ static void __init create_pte_mapping(pte_t *ptep,
>
> #ifndef __PAGETABLE_PMD_FOLDED
>
> -pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> -pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> -
> #if MAX_EARLY_MAPPING_SIZE < PGDIR_SIZE
> #define NUM_EARLY_PMDS 1UL
> #else
> #define NUM_EARLY_PMDS (1UL + MAX_EARLY_MAPPING_SIZE / PGDIR_SIZE)
> #endif
> +
> +#ifdef CONFIG_XIP_KERNEL
> +pmd_t _trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> +pmd_t _fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> +pmd_t _xip_pmd[PTRS_PER_PGD * NUM_EARLY_PMDS] __page_aligned_bss;
> +pmd_t _early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
> +
> +#define trampoline_pmd ((pmd_t *)__XIP_FIXUP(_trampoline_pmd))
> +#define fixmap_pmd ((pmd_t *)__XIP_FIXUP(_fixmap_pmd))
> +#define xip_pmd ((pmd_t *)__XIP_FIXUP(_xip_pmd))
> +#define early_pmd ((pmd_t *)__XIP_FIXUP(_early_pmd))
> +#else
> +pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> +pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> pmd_t early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
> +#endif
>
> static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> {
> @@ -420,6 +473,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> return PMD_SIZE;
> }
>
> +#ifdef CONFIG_XIP_KERNEL
> +/* called from head.S with MMU off */
> +asmlinkage void __init __copy_data(void)
> +{
> + void *from = (void *)(&_sdata);
> + void *end = (void *)(&_end);
> + void *to = (void *)CONFIG_XIP_PHYS_RAM_BASE;
> + size_t sz = (size_t)(end - from);
> +
> + memcpy(to, from, sz);
> +}
> +#endif
> +
> /*
> * setup_vm() is called from head.S with MMU-off.
> *
> @@ -448,6 +514,19 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> pmd_t fix_bmap_spmd, fix_bmap_epmd;
> #endif
>
> +#ifdef CONFIG_XIP_KERNEL
> + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> + uintptr_t xip_map_size = best_map_size(xiprom,
> + MAX_EARLY_MAPPING_SIZE);
> +
> + BUG_ON((xiprom % xip_map_size) != 0);
> + BUG_ON(xiprom_sz > MAX_EARLY_MAPPING_SIZE);
> +
> + load_pa = (uintptr_t)CONFIG_XIP_PHYS_RAM_BASE;
> + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> + map_size = best_map_size(load_pa, MAX_EARLY_MAPPING_SIZE);
> +#endif
Add new line here.
> va_pa_offset = PAGE_OFFSET - load_pa;
> pfn_base = PFN_DOWN(load_pa);
>
> @@ -487,6 +566,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> #endif
>
> +#ifdef CONFIG_XIP_KERNEL
> + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> + for (va = XIP_VIRT_ADDR_START;
> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> + va += PMD_SIZE) {
> + create_pmd_mapping(xip_pmd, va,
> + xiprom + (va - XIP_VIRT_ADDR_START),
> + PMD_SIZE, PAGE_KERNEL_EXEC);
> + }
> +
> + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> +#endif
> +
> /*
> * Setup early PGD covering entire kernel which will allows
> * us to reach paging_init(). We map all memory banks later
> @@ -543,6 +637,9 @@ static void __init setup_vm_final(void)
> uintptr_t va, map_size;
> phys_addr_t pa, start, end;
> u64 i;
> +#ifdef CONFIG_XIP_KERNEL
> + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> +#endif
>
> /**
> * MMU is enabled at this point. But page table setup is not complete yet.
> @@ -574,6 +671,25 @@ static void __init setup_vm_final(void)
> map_size, PAGE_KERNEL_EXEC);
> }
> }
Add new line here.
> +#ifdef CONFIG_XIP_KERNEL
> + for (va = XIP_VIRT_ADDR_START;
> + va < XIP_VIRT_ADDR_START + xiprom_sz;
> + va += PMD_SIZE)
> + create_pgd_mapping(swapper_pg_dir, va,
> + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
> + PMD_SIZE, PAGE_KERNEL_EXEC);
> +
> + /* if DT is in NOR, keep the early mapping */
> + if (dtb_early_pa >= CONFIG_XIP_PHYS_ADDR &&
> + dtb_early_pa <= CONFIG_XIP_PHYS_ADDR + SZ_16M) {
> + pa = dtb_early_pa & ~(PGDIR_SIZE - 1);
> + va = DTB_EARLY_BASE_VA;
> + create_pgd_mapping(swapper_pg_dir, va,
> + pa, PGDIR_SIZE, PAGE_KERNEL);
> + create_pgd_mapping(swapper_pg_dir, va + PGDIR_SIZE,
> + pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
This is wasted of virtual address space for XIP kernel.
Also, DTB_EARLY_BASE_VA is an adhoc address falling in user-space
address range.
I would recommend XIP kernel to:
1. Allocate memory for DTB using memblock_phys_alloc()
2. The virtual addres of allocated memory can be found using __va()
3. Copy DTB to allocated memory
4. Set dtb_early_pa to new DTB location
> + }
> +#endif
>
> /* Clear fixmap PTE and PMD mappings */
> clear_fixmap(FIX_PTE);
> --
> 2.29.2
>
Regards,
Anup
On Tue, Dec 22, 2020 at 2:44 AM Bin Meng <[email protected]> wrote:
>
> Hi Vitaly,
>
> On Tue, Dec 22, 2020 at 4:39 AM Vitaly Wool <[email protected]> wrote:
> >
> > Introduce XIP (eXecute In Place) support for RISC-V platforms.
> > It allows code to be executed directly from non-volatile storage
> > directly addressable by the CPU, such as QSPI NOR flash which can
> > be found on many RISC-V platforms. This makes way for significant
> > optimization of RAM footprint. The XIP kernel is not compressed
> > since it has to run directly from flash, so it will occupy more
> > space on the non-volatile storage to The physical flash address
> > used to link the kernel object files and for storing it has to
> > be known at compile time and is represented by a Kconfig option.
> >
> > XIP on RISC-V will currently only work on MMU-enabled kernels.
> >
> > Changed in v2:
> > - dedicated macro for XIP address fixup when MMU is not enabled yet
> > o both for 32-bit and 64-bit RISC-V
> > - SP is explicitly set to a safe place in RAM before __copy_data call
> > - removed redundant alignment requirements in vmlinux-xip.lds.S
> > - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >
> > Changed in v3:
> > - rebased against latest for-next
> > - XIP address fixup macro now takes an argument
> > - SMP related fixes
>
> The above changelogs should go below ---
That is very fair, thanks. Will do that for v4.
~Vitaly
> > Signed-off-by: Vitaly Wool <[email protected]>
> > ---
> > arch/riscv/Kconfig | 46 ++++++++-
> > arch/riscv/Makefile | 8 +-
> > arch/riscv/boot/Makefile | 13 +++
> > arch/riscv/include/asm/pgtable.h | 56 +++++++++--
> > arch/riscv/kernel/cpu_ops_sbi.c | 3 +
> > arch/riscv/kernel/head.S | 69 +++++++++++++-
> > arch/riscv/kernel/head.h | 3 +
> > arch/riscv/kernel/setup.c | 8 +-
> > arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++
> > arch/riscv/kernel/vmlinux.lds.S | 6 ++
> > arch/riscv/mm/init.c | 142 +++++++++++++++++++++++++---
> > 11 files changed, 460 insertions(+), 26 deletions(-)
> > create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >
>
> Regards,
> Bin
Hi Anup,
On Tue, Dec 22, 2020 at 6:16 AM Anup Patel <[email protected]> wrote:
>
> On Tue, Dec 22, 2020 at 2:08 AM Vitaly Wool <[email protected]> wrote:
> >
> > Introduce XIP (eXecute In Place) support for RISC-V platforms.
> > It allows code to be executed directly from non-volatile storage
> > directly addressable by the CPU, such as QSPI NOR flash which can
> > be found on many RISC-V platforms. This makes way for significant
> > optimization of RAM footprint. The XIP kernel is not compressed
> > since it has to run directly from flash, so it will occupy more
> > space on the non-volatile storage to The physical flash address
> > used to link the kernel object files and for storing it has to
> > be known at compile time and is represented by a Kconfig option.
> >
> > XIP on RISC-V will currently only work on MMU-enabled kernels.
> >
> > Changed in v2:
> > - dedicated macro for XIP address fixup when MMU is not enabled yet
> > o both for 32-bit and 64-bit RISC-V
> > - SP is explicitly set to a safe place in RAM before __copy_data call
> > - removed redundant alignment requirements in vmlinux-xip.lds.S
> > - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> >
> > Changed in v3:
> > - rebased against latest for-next
> > - XIP address fixup macro now takes an argument
> > - SMP related fixes
> > Signed-off-by: Vitaly Wool <[email protected]>
> > ---
> > arch/riscv/Kconfig | 46 ++++++++-
> > arch/riscv/Makefile | 8 +-
> > arch/riscv/boot/Makefile | 13 +++
> > arch/riscv/include/asm/pgtable.h | 56 +++++++++--
> > arch/riscv/kernel/cpu_ops_sbi.c | 3 +
> > arch/riscv/kernel/head.S | 69 +++++++++++++-
> > arch/riscv/kernel/head.h | 3 +
> > arch/riscv/kernel/setup.c | 8 +-
> > arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++
> > arch/riscv/kernel/vmlinux.lds.S | 6 ++
> > arch/riscv/mm/init.c | 142 +++++++++++++++++++++++++---
> > 11 files changed, 460 insertions(+), 26 deletions(-)
> > create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
>
> If possible please break down this patch into smaller patches
> which are bisect-able and easy to reivew.
I was thinking about that but any such split would look artificial to
me. It would obscure the idea in my opinion rather than help
understand it.
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 2b41f6d8e458..fabafdf763da 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -398,7 +398,7 @@ config EFI_STUB
> >
> > config EFI
> > bool "UEFI runtime support"
> > - depends on OF
> > + depends on OF && !XIP_KERNEL
> > select LIBFDT
> > select UCS2_STRING
> > select EFI_PARAMS_FROM_FDT
> > @@ -415,12 +415,52 @@ config EFI
> > allow the kernel to be booted as an EFI application. This
> > is only useful on systems that have UEFI firmware.
> >
> > +config XIP_KERNEL
> > + bool "Kernel Execute-In-Place from ROM"
> > + depends on MMU
> > + help
> > + Execute-In-Place allows the kernel to run from non-volatile storage
> > + directly addressable by the CPU, such as NOR flash. This saves RAM
> > + space since the text section of the kernel is not loaded from flash
> > + to RAM. Read-write sections, such as the data section and stack,
> > + are still copied to RAM. The XIP kernel is not compressed since
> > + it has to run directly from flash, so it will take more space to
> > + store it. The flash address used to link the kernel object files,
> > + and for storing it, is configuration dependent. Therefore, if you
> > + say Y here, you must know the proper physical address where to
> > + store the kernel image depending on your own flash memory usage.
> > +
> > + Also note that the make target becomes "make xipImage" rather than
> > + "make zImage" or "make Image". The final kernel binary to put in
> > + ROM memory will be arch/riscv/boot/xipImage.
> > +
> > + If unsure, say N.
> > +
> > +config XIP_PHYS_ADDR
> > + hex "XIP Kernel Physical Location"
> > + depends on XIP_KERNEL
> > + default "0x21000000"
> > + help
> > + This is the physical address in your flash memory the kernel will
> > + be linked for and stored to. This address is dependent on your
> > + own flash usage.
> > +
> > +config XIP_PHYS_RAM_BASE
> > + hex "Platform Physical RAM address"
> > + depends on XIP_KERNEL
> > + default "0x80000000"
> > + help
> > + This is the physical address of RAM in the system. It has to be
> > + explicitly specified to run early relocations of read-write data
> > + from flash to RAM.
> > endmenu
> >
> > config BUILTIN_DTB
> > - def_bool n
> > - depends on RISCV_M_MODE
> > + bool
> > + depends on (RISCV_M_MODE || XIP_KERNEL)
> > depends on OF
> > + default y if XIP_KERNEL
> > + default n if !XIP_KERNEL
>
> The "default n" case is not required because by default it is disabled.
Thanks, will fix.
> > menu "Power management options"
> >
> > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > index 8c29e553ef7f..b89b6897b0be 100644
> > --- a/arch/riscv/Makefile
> > +++ b/arch/riscv/Makefile
> > @@ -70,7 +70,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> >
> > # Default target when executing plain make
> > boot := arch/riscv/boot
> > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > +KBUILD_IMAGE := $(boot)/xipImage
> > +else
> > KBUILD_IMAGE := $(boot)/Image.gz
> > +endif
> >
> > head-y := arch/riscv/kernel/head.o
> >
> > @@ -83,12 +87,14 @@ PHONY += vdso_install
> > vdso_install:
> > $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> >
> > +ifneq ($(CONFIG_XIP_KERNEL),y)
> > ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
> > KBUILD_IMAGE := $(boot)/loader.bin
> > else
> > KBUILD_IMAGE := $(boot)/Image.gz
> > endif
> > -BOOT_TARGETS := Image Image.gz loader loader.bin
> > +endif
> > +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> >
> > all: $(notdir $(KBUILD_IMAGE))
> >
> > diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> > index 03404c84f971..6bf299f70c27 100644
> > --- a/arch/riscv/boot/Makefile
> > +++ b/arch/riscv/boot/Makefile
> > @@ -17,8 +17,21 @@
> > KCOV_INSTRUMENT := n
> >
> > OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> > +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> >
> > targets := Image Image.* loader loader.o loader.lds loader.bin
> > +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> > +
> > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > +
> > +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> > +cmd_mkxip = $(cmd_objcopy)
> > +
> > +$(obj)/xipImage: vmlinux FORCE
> > + $(call if_changed,mkxip)
> > + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> > +
> > +endif
> >
> > $(obj)/Image: vmlinux FORCE
> > $(call if_changed,objcopy)
> > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > index 183f1f4b2ae6..ec3360363b71 100644
> > --- a/arch/riscv/include/asm/pgtable.h
> > +++ b/arch/riscv/include/asm/pgtable.h
> > @@ -11,6 +11,42 @@
> >
> > #include <asm/pgtable-bits.h>
> >
> > +#ifdef CONFIG_MMU
> > +
> > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +/*
> > + * Since we use sections to map it, this macro replaces the physical address
> > + * with its virtual address while keeping offset from the base section.
> > + */
> > +#define XIP_OFFSET SZ_8M
> > +#define XIP_MASK (SZ_8M - 1)
> > +#define XIP_VIRT_ADDR(physaddr) (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> > +#define XIP_PHYS_ADDR(va) \
> > + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> > +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> > +
> > +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +#define __PHYS_RAM_BASE CONFIG_XIP_PHYS_RAM_BASE
> > +
> > +#define __XIP_FIXUP(addr) \
> > + (((uintptr_t)(addr) >= CONFIG_XIP_PHYS_ADDR && \
> > + (uintptr_t)(addr) <= CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> > + (uintptr_t)(addr) - CONFIG_XIP_PHYS_ADDR + __PHYS_RAM_BASE - XIP_OFFSET : \
> > + (uintptr_t)(addr))
> > +
> > +#else
> > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > +#else
> > +
> > +#define XIP_VIRT_ADDR(physaddr) physaddr
> > +
> > +#endif /* CONFIG_MMU */
> > +
>
> Lot of defines above will not work for assembly sources.
>
> Keep only assembly friendly defines outside "#ifndef __ASSEMBLY__"
Fair enough, will do.
> > #ifndef __ASSEMBLY__
> >
> > /* Page Upper Directory not used in RISC-V */
> > @@ -21,10 +57,6 @@
> >
> > #ifdef CONFIG_MMU
> >
> > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > -
> > #define BPF_JIT_REGION_SIZE (SZ_128M)
> > #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > #define BPF_JIT_REGION_END (VMALLOC_END)
> > @@ -467,8 +499,20 @@ static inline void __kernel_map_pages(struct page *page, int numpages, int enabl
> >
> > #define kern_addr_valid(addr) (1) /* FIXME */
> >
> > -extern void *dtb_early_va;
> > -extern uintptr_t dtb_early_pa;
> > +extern void *_dtb_early_va;
> > +extern uintptr_t _dtb_early_pa;
> > +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> > +
> > +#define dtb_early_va (*(void **)__XIP_FIXUP(&_dtb_early_va))
> > +#define dtb_early_pa (*(uintptr_t *)__XIP_FIXUP(&_dtb_early_pa))
> > +
> > +#else
> > +
> > +#define dtb_early_va _dtb_early_va
> > +#define dtb_early_pa _dtb_early_pa
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > void setup_bootmem(void);
> > void paging_init(void);
> >
> > diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> > index 685fae72b7f5..9c8d6dab55b8 100644
> > --- a/arch/riscv/kernel/cpu_ops_sbi.c
> > +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> > @@ -59,6 +59,9 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> > unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> > int hartid = cpuid_to_hartid_map(cpuid);
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + boot_addr = XIP_PHYS_ADDR(secondary_start_sbi);
> > +#endif
>
> You can avoid "#ifdef CONFIG_XIP_KERNEL" here by defining
> XIP_PHYS_ADDR() to do nothing when XIP_KERNEL is disabled.
That's right but I think it actually makes things harder to
understand. Instead, I can implement a static inline helper like
get_secondary_start_phys() which will return the appropriate value
depending on the actual configuration. Does that sound reasonable?
> > cpu_update_secondary_bootdata(cpuid, tidle);
> > rc = sbi_hsm_hart_start(hartid, boot_addr, 0);
> >
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index 45dbdae930bf..6f065a5502d3 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -9,11 +9,31 @@
> > #include <linux/linkage.h>
> > #include <asm/thread_info.h>
> > #include <asm/page.h>
> > +#include <asm/pgtable.h>
> > #include <asm/csr.h>
> > #include <asm/hwcap.h>
> > #include <asm/image.h>
> > #include "efi-header.S"
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +.macro XIP_FIXUP_OFFSET reg
> > +#ifdef CONFIG_64BIT
> > + ld t0, _xip_fixup
> > +#else
> > + lw t0, _xip_fixup
> > +#endif
> > + add \reg, \reg, t0
> > +.endm
> > +
> > +_xip_fixup:
> > +#ifdef CONFIG_64BIT
> > + .dword CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> > +#else
> > + .word CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> > +#endif
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > __HEAD
> > ENTRY(_start)
> > /*
> > @@ -64,7 +84,11 @@ pe_head_start:
> > #ifdef CONFIG_MMU
> > relocate:
> > /* Relocate return address */
> > +#ifdef CONFIG_XIP_KERNEL
> > + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +#else
> > li a1, PAGE_OFFSET
> > +#endif
> > la a2, _start
> > sub a1, a1, a2
> > add ra, ra, a1
> > @@ -85,7 +109,12 @@ relocate:
> > * full fence here because setup_vm() just wrote these PTEs and we need
> > * to ensure the new translations are in use.
> > */
> > +#ifdef CONFIG_XIP_KERNEL
> > + la a0, _trampoline_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > +#else
> > la a0, trampoline_pg_dir
> > +#endif
> > srl a0, a0, PAGE_SHIFT
> > or a0, a0, a1
> > sfence.vma
> > @@ -140,6 +169,10 @@ secondary_start_sbi:
> > slli a3, a0, LGREG
> > la a4, __cpu_up_stack_pointer
> > la a5, __cpu_up_task_pointer
> > +#ifdef CONFIG_XIP_KERNEL
> > + XIP_FIXUP_OFFSET a4
> > + XIP_FIXUP_OFFSET a5
> > +#endif
> > add a4, a3, a4
> > add a5, a3, a5
> > REG_L sp, (a4)
> > @@ -233,10 +266,24 @@ pmp_done:
> >
> > /* Pick one hart to run the main boot sequence */
> > la a3, hart_lottery
> > +#ifdef CONFIG_XIP_KERNEL
> > + XIP_FIXUP_OFFSET a3
> > +#endif
> > li a2, 1
> > amoadd.w a3, a2, (a3)
> > bnez a3, .Lsecondary_start
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + la sp, _end + THREAD_SIZE
> > + XIP_FIXUP_OFFSET sp
> > + mv s0, a0
> > + call __copy_data
> > +
> > + /* Restore a0 copy */
> > + mv a0, s0
> > +#endif
> > +
> > +#ifndef CONFIG_XIP_KERNEL
> > /* Clear BSS for flat non-ELF images */
> > la a3, __bss_start
> > la a4, __bss_stop
> > @@ -246,19 +293,35 @@ clear_bss:
> > add a3, a3, RISCV_SZPTR
> > blt a3, a4, clear_bss
> > clear_bss_done:
> > -
> > +#endif
> > /* Save hart ID and DTB physical address */
> > mv s0, a0
> > mv s1, a1
> > +
> > la a2, boot_cpu_hartid
> > +#ifdef CONFIG_XIP_KERNEL
> > + XIP_FIXUP_OFFSET a2
> > +#endif
> > REG_S a0, (a2)
> >
> > /* Initialize page tables and relocate to virtual addresses */
> > la sp, init_thread_union + THREAD_SIZE
> > +#ifdef CONFIG_XIP_KERNEL
> > + XIP_FIXUP_OFFSET sp
> > +#endif
> > +#if defined (CONFIG_XIP_KERNEL) && defined (CONFIG_BUILTIN_DTB)
> > + la a0, __dtb_start
> > +#else
> > mv a0, s1
> > +#endif
> > call setup_vm
> > #ifdef CONFIG_MMU
> > +#ifdef CONFIG_XIP_KERNEL
> > + la a0, _early_pg_dir
> > + XIP_FIXUP_OFFSET a0
> > +#else
> > la a0, early_pg_dir
> > +#endif
> > call relocate
> > #endif /* CONFIG_MMU */
> >
> > @@ -284,6 +347,10 @@ clear_bss_done:
> > slli a3, a0, LGREG
> > la a1, __cpu_up_stack_pointer
> > la a2, __cpu_up_task_pointer
> > +#ifdef CONFIG_XIP_KERNEL
> > + XIP_FIXUP_OFFSET a1
> > + XIP_FIXUP_OFFSET a2
> > +#endif
> > add a1, a3, a1
> > add a2, a3, a2
> >
> > diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> > index b48dda3d04f6..aabbc3ac3e48 100644
> > --- a/arch/riscv/kernel/head.h
> > +++ b/arch/riscv/kernel/head.h
> > @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> >
> > asmlinkage void do_page_fault(struct pt_regs *regs);
> > asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> > +#ifdef CONFIG_XIP_KERNEL
> > +asmlinkage void __init __copy_data(void);
> > +#endif
> >
> > extern void *__cpu_up_stack_pointer[];
> > extern void *__cpu_up_task_pointer[];
> > diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > index a834deab31d3..876d4ff0ecc4 100644
> > --- a/arch/riscv/kernel/setup.c
> > +++ b/arch/riscv/kernel/setup.c
> > @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> > * This is used before the kernel initializes the BSS so it can't be in the
> > * BSS.
> > */
> > -atomic_t hart_lottery __section(".sdata");
> > +atomic_t hart_lottery __section(".sdata")
> > +#ifdef CONFIG_XIP_KERNEL
> > += ATOMIC_INIT(1)
> > +#endif
> > +;
> > unsigned long boot_cpu_hartid;
> > static DEFINE_PER_CPU(struct cpu, cpu_devices);
> >
> > @@ -244,7 +248,7 @@ void __init setup_arch(char **cmdline_p)
> > #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> > unflatten_and_copy_device_tree();
> > #else
> > - if (early_init_dt_verify(__va(dtb_early_pa)))
> > + if (early_init_dt_verify(dtb_early_va))
>
> We can't use dtb_early_va here because early DTB mappings are only done
> in early_pg_dir but not available in swapper_pg_dir.
Well, as you can see if you look further down the patch, I do set
dtb_early_va to __va(dtb_early_pa) for the non-XIP case.
> > unflatten_device_tree();
> > else
> > pr_err("No DTB found in kernel mappings\n");
> > diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
> > new file mode 100644
> > index 000000000000..9f0f08c34cd3
> > --- /dev/null
> > +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> > @@ -0,0 +1,132 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2012 Regents of the University of California
> > + * Copyright (C) 2017 SiFive
> > + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> > + */
> > +
> > +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > +/* No __ro_after_init data in the .rodata section - which will always be ro */
> > +#define RO_AFTER_INIT_DATA
> > +
> > +#include <asm/vmlinux.lds.h>
> > +#include <asm/page.h>
> > +#include <asm/pgtable.h>
> > +#include <asm/cache.h>
> > +#include <asm/thread_info.h>
> > +
> > +OUTPUT_ARCH(riscv)
> > +ENTRY(_start)
> > +
> > +jiffies = jiffies_64;
> > +
> > +SECTIONS
> > +{
> > + /* Beginning of code and text segment */
> > + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> > + _xiprom = .;
> > + _start = .;
> > + HEAD_TEXT_SECTION
> > + INIT_TEXT_SECTION(PAGE_SIZE)
> > + /* we have to discard exit text and such at runtime, not link time */
> > + .exit.text :
> > + {
> > + EXIT_TEXT
> > + }
> > +
> > + .text : {
> > + _text = .;
> > + _stext = .;
> > + TEXT_TEXT
> > + SCHED_TEXT
> > + CPUIDLE_TEXT
> > + LOCK_TEXT
> > + KPROBES_TEXT
> > + ENTRY_TEXT
> > + IRQENTRY_TEXT
> > + SOFTIRQENTRY_TEXT
> > + *(.fixup)
> > + _etext = .;
> > + }
> > + RO_DATA(L1_CACHE_BYTES)
> > + .srodata : {
> > + *(.srodata*)
> > + }
> > + .init.rodata : {
> > + INIT_SETUP(16)
> > + INIT_CALLS
> > + CON_INITCALL
> > + INIT_RAM_FS
> > + }
> > + _exiprom = .; /* End of XIP ROM area */
> > +
> > +
> > +/*
> > + * From this point, stuff is considered writable and will be copied to RAM
> > + */
> > + __data_loc = ALIGN(16); /* location in file */
> > + . = PAGE_OFFSET; /* location in memory */
> > +
> > + _sdata = .; /* Start of data section */
> > + _data = .;
> > + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> > + _edata = .;
> > + __start_ro_after_init = .;
> > + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> > + *(.data..ro_after_init)
> > + }
> > + __end_ro_after_init = .;
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + __init_begin = .;
> > + .init.data : {
> > + INIT_DATA
> > + }
> > + .exit.data : {
> > + EXIT_DATA
> > + }
> > + . = ALIGN(8);
> > + __soc_early_init_table : {
> > + __soc_early_init_table_start = .;
> > + KEEP(*(__soc_early_init_table))
> > + __soc_early_init_table_end = .;
> > + }
> > + __soc_builtin_dtb_table : {
> > + __soc_builtin_dtb_table_start = .;
> > + KEEP(*(__soc_builtin_dtb_table))
> > + __soc_builtin_dtb_table_end = .;
> > + }
> > + PERCPU_SECTION(L1_CACHE_BYTES)
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + __init_end = .;
> > +
> > + .sdata : {
> > + __global_pointer$ = . + 0x800;
> > + *(.sdata*)
> > + *(.sbss*)
> > + }
> > +
> > + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> > + EXCEPTION_TABLE(0x10)
> > +
> > + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> > + *(.rel.dyn*)
> > + }
> > +
> > + /*
> > + * End of copied data. We need a dummy section to get its LMA.
> > + * Also located before final ALIGN() as trailing padding is not stored
> > + * in the resulting binary file and useless to copy.
> > + */
> > + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> > + _edata_loc = LOADADDR(.data.endmark);
> > +
> > + . = ALIGN(PAGE_SIZE);
> > + _end = .;
> > +
> > + STABS_DEBUG
> > + DWARF_DEBUG
> > +
> > + DISCARDS
> > +}
>
> Atish's patch series "[PATCH v3 0/5] Improve kernel section protections"
> updates vmlinux.lds.S so take that as reference for your vmlinux-xip.lds.S
vmlinux-xip loaded script doesn't have to be a carbon copy of the
original one. Is there something special that you believe is needed
for the XIP version?
> > diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> > index de03cb22d0e9..6745ec325930 100644
> > --- a/arch/riscv/kernel/vmlinux.lds.S
> > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > @@ -4,7 +4,12 @@
> > * Copyright (C) 2017 SiFive
> > */
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +#include "vmlinux-xip.lds.S"
> > +#else
> > +
> > #define LOAD_OFFSET PAGE_OFFSET
> > +
> > #include <asm/vmlinux.lds.h>
> > #include <asm/page.h>
> > #include <asm/cache.h>
> > @@ -132,3 +137,4 @@ SECTIONS
> >
> > DISCARDS
> > }
> > +#endif /* CONFIG_XIP_KERNEL */
> > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > index 87c305c566ac..8636432400df 100644
> > --- a/arch/riscv/mm/init.c
> > +++ b/arch/riscv/mm/init.c
> > @@ -30,8 +30,8 @@ EXPORT_SYMBOL(empty_zero_page);
> >
> > extern char _start[];
> > #define DTB_EARLY_BASE_VA PGDIR_SIZE
> > -void *dtb_early_va __initdata;
> > -uintptr_t dtb_early_pa __initdata;
> > +void *_dtb_early_va __initdata;
> > +uintptr_t _dtb_early_pa __initdata;
> >
> > struct pt_alloc_ops {
> > pte_t *(*get_pte_virt)(phys_addr_t pa);
> > @@ -87,6 +87,10 @@ static void print_vm_layout(void)
> > (unsigned long)VMALLOC_END);
> > print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> > (unsigned long)high_memory);
> > +#ifdef CONFIG_XIP_KERNEL
> > + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> > + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> > +#endif /* CONFIG_XIP_KERNEL */
> > }
> > #else
> > static void print_vm_layout(void) { }
> > @@ -163,6 +167,10 @@ void __init setup_bootmem(void)
> > phys_addr_t vmlinux_start = __pa_symbol(&_start);
> > u64 i;
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + vmlinux_start = __pa_symbol(&_sdata);
> > +#endif
> > +
> > /* Find the memory region containing the kernel */
> > for_each_mem_range(i, &start, &end) {
> > phys_addr_t size = end - start;
> > @@ -194,11 +202,18 @@ void __init setup_bootmem(void)
> > setup_initrd();
> > #endif /* CONFIG_BLK_DEV_INITRD */
> >
> > - /*
> > - * Avoid using early_init_fdt_reserve_self() since __pa() does
> > - * not work for DTB pointers that are fixmap addresses
> > - */
> > - memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> > +#ifdef CONFIG_XIP_KERNEL
> > + if (dtb_early_pa < CONFIG_XIP_PHYS_ADDR ||
> > + dtb_early_pa > CONFIG_XIP_PHYS_ADDR + SZ_16M)
> > +#endif
> > + {
> > + /*
> > + * Avoid using early_init_fdt_reserve_self() since __pa() does
> > + * not work for DTB pointers that are fixmap addresses
> > + */
> > + memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> > + dtb_early_va = __va(dtb_early_pa);
>
> Drop this "dtb_early_va" assignment.
See above.
> > + }
> >
> > early_init_fdt_scan_reserved_mem();
> > dma_contiguous_reserve(dma32_phys_limit);
> > @@ -206,21 +221,47 @@ void __init setup_bootmem(void)
> > memblock_dump_all();
> > }
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +
> > +extern char _xiprom[], _exiprom[];
> > +extern char _sdata[], _edata[];
> > +
> > +#endif /* CONFIG_XIP_KERNEL */
> > +
> > #ifdef CONFIG_MMU
> > -static struct pt_alloc_ops pt_ops;
> > +static struct pt_alloc_ops _pt_ops;
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define pt_ops (*(struct pt_alloc_ops *)__XIP_FIXUP(&_pt_ops))
> > +#else
> > +#define pt_ops _pt_ops
> > +#endif
> >
> > unsigned long va_pa_offset;
> > EXPORT_SYMBOL(va_pa_offset);
> > +#ifdef CONFIG_XIP_KERNEL
> > +#define va_pa_offset (*((unsigned long *)__XIP_FIXUP(&va_pa_offset)))
> > +#endif
> > unsigned long pfn_base;
> > EXPORT_SYMBOL(pfn_base);
> >
> > pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > -pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > -pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> >
> > #define MAX_EARLY_MAPPING_SIZE SZ_128M
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +pgd_t _trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > +pte_t _fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> > +pgd_t _early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> > +
> > +#define trampoline_pg_dir ((pgd_t *)__XIP_FIXUP(_trampoline_pg_dir))
> > +#define fixmap_pte ((pte_t *)__XIP_FIXUP(_fixmap_pte))
> > +#define early_pg_dir ((pgd_t *)__XIP_FIXUP(_early_pg_dir))
> > +#else
> > +pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > +pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> > pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> > +#endif /* CONFIG_XIP_KERNEL */
> >
> > void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> > {
> > @@ -292,15 +333,27 @@ static void __init create_pte_mapping(pte_t *ptep,
> >
> > #ifndef __PAGETABLE_PMD_FOLDED
> >
> > -pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > -pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > -
> > #if MAX_EARLY_MAPPING_SIZE < PGDIR_SIZE
> > #define NUM_EARLY_PMDS 1UL
> > #else
> > #define NUM_EARLY_PMDS (1UL + MAX_EARLY_MAPPING_SIZE / PGDIR_SIZE)
> > #endif
> > +
> > +#ifdef CONFIG_XIP_KERNEL
> > +pmd_t _trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > +pmd_t _fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > +pmd_t _xip_pmd[PTRS_PER_PGD * NUM_EARLY_PMDS] __page_aligned_bss;
> > +pmd_t _early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
> > +
> > +#define trampoline_pmd ((pmd_t *)__XIP_FIXUP(_trampoline_pmd))
> > +#define fixmap_pmd ((pmd_t *)__XIP_FIXUP(_fixmap_pmd))
> > +#define xip_pmd ((pmd_t *)__XIP_FIXUP(_xip_pmd))
> > +#define early_pmd ((pmd_t *)__XIP_FIXUP(_early_pmd))
> > +#else
> > +pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > +pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > pmd_t early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
> > +#endif
> >
> > static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> > {
> > @@ -420,6 +473,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> > return PMD_SIZE;
> > }
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > +/* called from head.S with MMU off */
> > +asmlinkage void __init __copy_data(void)
> > +{
> > + void *from = (void *)(&_sdata);
> > + void *end = (void *)(&_end);
> > + void *to = (void *)CONFIG_XIP_PHYS_RAM_BASE;
> > + size_t sz = (size_t)(end - from);
> > +
> > + memcpy(to, from, sz);
> > +}
> > +#endif
> > +
> > /*
> > * setup_vm() is called from head.S with MMU-off.
> > *
> > @@ -448,6 +514,19 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > pmd_t fix_bmap_spmd, fix_bmap_epmd;
> > #endif
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > + uintptr_t xip_map_size = best_map_size(xiprom,
> > + MAX_EARLY_MAPPING_SIZE);
> > +
> > + BUG_ON((xiprom % xip_map_size) != 0);
> > + BUG_ON(xiprom_sz > MAX_EARLY_MAPPING_SIZE);
> > +
> > + load_pa = (uintptr_t)CONFIG_XIP_PHYS_RAM_BASE;
> > + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> > + map_size = best_map_size(load_pa, MAX_EARLY_MAPPING_SIZE);
> > +#endif
>
> Add new line here.
>
> > va_pa_offset = PAGE_OFFSET - load_pa;
> > pfn_base = PFN_DOWN(load_pa);
> >
> > @@ -487,6 +566,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> > #endif
> >
> > +#ifdef CONFIG_XIP_KERNEL
> > + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > + for (va = XIP_VIRT_ADDR_START;
> > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > + va += PMD_SIZE) {
> > + create_pmd_mapping(xip_pmd, va,
> > + xiprom + (va - XIP_VIRT_ADDR_START),
> > + PMD_SIZE, PAGE_KERNEL_EXEC);
> > + }
> > +
> > + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > +#endif
> > +
> > /*
> > * Setup early PGD covering entire kernel which will allows
> > * us to reach paging_init(). We map all memory banks later
> > @@ -543,6 +637,9 @@ static void __init setup_vm_final(void)
> > uintptr_t va, map_size;
> > phys_addr_t pa, start, end;
> > u64 i;
> > +#ifdef CONFIG_XIP_KERNEL
> > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > +#endif
> >
> > /**
> > * MMU is enabled at this point. But page table setup is not complete yet.
> > @@ -574,6 +671,25 @@ static void __init setup_vm_final(void)
> > map_size, PAGE_KERNEL_EXEC);
> > }
> > }
>
> Add new line here.
>
> > +#ifdef CONFIG_XIP_KERNEL
> > + for (va = XIP_VIRT_ADDR_START;
> > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > + va += PMD_SIZE)
> > + create_pgd_mapping(swapper_pg_dir, va,
> > + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
> > + PMD_SIZE, PAGE_KERNEL_EXEC);
> > +
> > + /* if DT is in NOR, keep the early mapping */
> > + if (dtb_early_pa >= CONFIG_XIP_PHYS_ADDR &&
> > + dtb_early_pa <= CONFIG_XIP_PHYS_ADDR + SZ_16M) {
> > + pa = dtb_early_pa & ~(PGDIR_SIZE - 1);
> > + va = DTB_EARLY_BASE_VA;
> > + create_pgd_mapping(swapper_pg_dir, va,
> > + pa, PGDIR_SIZE, PAGE_KERNEL);
> > + create_pgd_mapping(swapper_pg_dir, va + PGDIR_SIZE,
> > + pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
>
> This is wasted of virtual address space for XIP kernel.
For XIP cases we shouldn't care too much about virtual address space.
We are saving RAM (and power, FWIW, but that's unrelated) :-)
> Also, DTB_EARLY_BASE_VA is an adhoc address falling in user-space
> address range.
That's fair. Would you agree with me changing the mapping to point to
somewhere between VMALLOC_END and XIP_VIRT_ADDR_START?
> I would recommend XIP kernel to:
> 1. Allocate memory for DTB using memblock_phys_alloc()
> 2. The virtual addres of allocated memory can be found using __va()
> 3. Copy DTB to allocated memory
> 4. Set dtb_early_pa to new DTB location
No, I don't want to copy DTB to RAM at all as long as I can avoid
that. See also above, we have a goal of *saving* RAM. It is directly
contradictory to this goal to waste up to 100+K of RAM.
Again, what if I change DTB_EARLY_BASE_VA to be something like
(XIP_VIRT_ADDR_START-2*PMD_SIZE) in the XIP case?
> > + }
> > +#endif
> >
> > /* Clear fixmap PTE and PMD mappings */
> > clear_fixmap(FIX_PTE);
> > --
> > 2.29.2
> >
>
> Regards,
> Anup
...and thanks for the thorough review of course.
Best regards,
Vitaly
On Tue, Dec 22, 2020 at 3:55 PM Vitaly Wool <[email protected]> wrote:
>
> Hi Anup,
>
> On Tue, Dec 22, 2020 at 6:16 AM Anup Patel <[email protected]> wrote:
> >
> > On Tue, Dec 22, 2020 at 2:08 AM Vitaly Wool <[email protected]> wrote:
> > >
> > > Introduce XIP (eXecute In Place) support for RISC-V platforms.
> > > It allows code to be executed directly from non-volatile storage
> > > directly addressable by the CPU, such as QSPI NOR flash which can
> > > be found on many RISC-V platforms. This makes way for significant
> > > optimization of RAM footprint. The XIP kernel is not compressed
> > > since it has to run directly from flash, so it will occupy more
> > > space on the non-volatile storage to The physical flash address
> > > used to link the kernel object files and for storing it has to
> > > be known at compile time and is represented by a Kconfig option.
> > >
> > > XIP on RISC-V will currently only work on MMU-enabled kernels.
> > >
> > > Changed in v2:
> > > - dedicated macro for XIP address fixup when MMU is not enabled yet
> > > o both for 32-bit and 64-bit RISC-V
> > > - SP is explicitly set to a safe place in RAM before __copy_data call
> > > - removed redundant alignment requirements in vmlinux-xip.lds.S
> > > - changed long -> uintptr_t typecast in __XIP_FIXUP macro.
> > >
> > > Changed in v3:
> > > - rebased against latest for-next
> > > - XIP address fixup macro now takes an argument
> > > - SMP related fixes
> > > Signed-off-by: Vitaly Wool <[email protected]>
> > > ---
> > > arch/riscv/Kconfig | 46 ++++++++-
> > > arch/riscv/Makefile | 8 +-
> > > arch/riscv/boot/Makefile | 13 +++
> > > arch/riscv/include/asm/pgtable.h | 56 +++++++++--
> > > arch/riscv/kernel/cpu_ops_sbi.c | 3 +
> > > arch/riscv/kernel/head.S | 69 +++++++++++++-
> > > arch/riscv/kernel/head.h | 3 +
> > > arch/riscv/kernel/setup.c | 8 +-
> > > arch/riscv/kernel/vmlinux-xip.lds.S | 132 ++++++++++++++++++++++++++
> > > arch/riscv/kernel/vmlinux.lds.S | 6 ++
> > > arch/riscv/mm/init.c | 142 +++++++++++++++++++++++++---
> > > 11 files changed, 460 insertions(+), 26 deletions(-)
> > > create mode 100644 arch/riscv/kernel/vmlinux-xip.lds.S
> >
> > If possible please break down this patch into smaller patches
> > which are bisect-able and easy to reivew.
>
> I was thinking about that but any such split would look artificial to
> me. It would obscure the idea in my opinion rather than help
> understand it.
>
> > >
> > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > > index 2b41f6d8e458..fabafdf763da 100644
> > > --- a/arch/riscv/Kconfig
> > > +++ b/arch/riscv/Kconfig
> > > @@ -398,7 +398,7 @@ config EFI_STUB
> > >
> > > config EFI
> > > bool "UEFI runtime support"
> > > - depends on OF
> > > + depends on OF && !XIP_KERNEL
> > > select LIBFDT
> > > select UCS2_STRING
> > > select EFI_PARAMS_FROM_FDT
> > > @@ -415,12 +415,52 @@ config EFI
> > > allow the kernel to be booted as an EFI application. This
> > > is only useful on systems that have UEFI firmware.
> > >
> > > +config XIP_KERNEL
> > > + bool "Kernel Execute-In-Place from ROM"
> > > + depends on MMU
> > > + help
> > > + Execute-In-Place allows the kernel to run from non-volatile storage
> > > + directly addressable by the CPU, such as NOR flash. This saves RAM
> > > + space since the text section of the kernel is not loaded from flash
> > > + to RAM. Read-write sections, such as the data section and stack,
> > > + are still copied to RAM. The XIP kernel is not compressed since
> > > + it has to run directly from flash, so it will take more space to
> > > + store it. The flash address used to link the kernel object files,
> > > + and for storing it, is configuration dependent. Therefore, if you
> > > + say Y here, you must know the proper physical address where to
> > > + store the kernel image depending on your own flash memory usage.
> > > +
> > > + Also note that the make target becomes "make xipImage" rather than
> > > + "make zImage" or "make Image". The final kernel binary to put in
> > > + ROM memory will be arch/riscv/boot/xipImage.
> > > +
> > > + If unsure, say N.
> > > +
> > > +config XIP_PHYS_ADDR
> > > + hex "XIP Kernel Physical Location"
> > > + depends on XIP_KERNEL
> > > + default "0x21000000"
> > > + help
> > > + This is the physical address in your flash memory the kernel will
> > > + be linked for and stored to. This address is dependent on your
> > > + own flash usage.
> > > +
> > > +config XIP_PHYS_RAM_BASE
> > > + hex "Platform Physical RAM address"
> > > + depends on XIP_KERNEL
> > > + default "0x80000000"
> > > + help
> > > + This is the physical address of RAM in the system. It has to be
> > > + explicitly specified to run early relocations of read-write data
> > > + from flash to RAM.
> > > endmenu
> > >
> > > config BUILTIN_DTB
> > > - def_bool n
> > > - depends on RISCV_M_MODE
> > > + bool
> > > + depends on (RISCV_M_MODE || XIP_KERNEL)
> > > depends on OF
> > > + default y if XIP_KERNEL
> > > + default n if !XIP_KERNEL
> >
> > The "default n" case is not required because by default it is disabled.
>
> Thanks, will fix.
>
> > > menu "Power management options"
> > >
> > > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > > index 8c29e553ef7f..b89b6897b0be 100644
> > > --- a/arch/riscv/Makefile
> > > +++ b/arch/riscv/Makefile
> > > @@ -70,7 +70,11 @@ CHECKFLAGS += -D__riscv -D__riscv_xlen=$(BITS)
> > >
> > > # Default target when executing plain make
> > > boot := arch/riscv/boot
> > > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > > +KBUILD_IMAGE := $(boot)/xipImage
> > > +else
> > > KBUILD_IMAGE := $(boot)/Image.gz
> > > +endif
> > >
> > > head-y := arch/riscv/kernel/head.o
> > >
> > > @@ -83,12 +87,14 @@ PHONY += vdso_install
> > > vdso_install:
> > > $(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
> > >
> > > +ifneq ($(CONFIG_XIP_KERNEL),y)
> > > ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_KENDRYTE),yy)
> > > KBUILD_IMAGE := $(boot)/loader.bin
> > > else
> > > KBUILD_IMAGE := $(boot)/Image.gz
> > > endif
> > > -BOOT_TARGETS := Image Image.gz loader loader.bin
> > > +endif
> > > +BOOT_TARGETS := Image Image.gz loader loader.bin xipImage
> > >
> > > all: $(notdir $(KBUILD_IMAGE))
> > >
> > > diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> > > index 03404c84f971..6bf299f70c27 100644
> > > --- a/arch/riscv/boot/Makefile
> > > +++ b/arch/riscv/boot/Makefile
> > > @@ -17,8 +17,21 @@
> > > KCOV_INSTRUMENT := n
> > >
> > > OBJCOPYFLAGS_Image :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> > > +OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> > >
> > > targets := Image Image.* loader loader.o loader.lds loader.bin
> > > +targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> > > +
> > > +ifeq ($(CONFIG_XIP_KERNEL),y)
> > > +
> > > +quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> > > +cmd_mkxip = $(cmd_objcopy)
> > > +
> > > +$(obj)/xipImage: vmlinux FORCE
> > > + $(call if_changed,mkxip)
> > > + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> > > +
> > > +endif
> > >
> > > $(obj)/Image: vmlinux FORCE
> > > $(call if_changed,objcopy)
> > > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > > index 183f1f4b2ae6..ec3360363b71 100644
> > > --- a/arch/riscv/include/asm/pgtable.h
> > > +++ b/arch/riscv/include/asm/pgtable.h
> > > @@ -11,6 +11,42 @@
> > >
> > > #include <asm/pgtable-bits.h>
> > >
> > > +#ifdef CONFIG_MMU
> > > +
> > > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > > +
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +/*
> > > + * Since we use sections to map it, this macro replaces the physical address
> > > + * with its virtual address while keeping offset from the base section.
> > > + */
> > > +#define XIP_OFFSET SZ_8M
> > > +#define XIP_MASK (SZ_8M - 1)
> > > +#define XIP_VIRT_ADDR(physaddr) (PAGE_OFFSET - XIP_OFFSET + ((physaddr) & XIP_MASK))
> > > +#define XIP_PHYS_ADDR(va) \
> > > + ((uintptr_t)(va) - PAGE_OFFSET + XIP_OFFSET + CONFIG_XIP_PHYS_ADDR)
> > > +#define VMALLOC_END (PAGE_OFFSET - SZ_16M - 1)
> > > +
> > > +#define XIP_VIRT_ADDR_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > > +#define __PHYS_RAM_BASE CONFIG_XIP_PHYS_RAM_BASE
> > > +
> > > +#define __XIP_FIXUP(addr) \
> > > + (((uintptr_t)(addr) >= CONFIG_XIP_PHYS_ADDR && \
> > > + (uintptr_t)(addr) <= CONFIG_XIP_PHYS_ADDR + SZ_16M) ? \
> > > + (uintptr_t)(addr) - CONFIG_XIP_PHYS_ADDR + __PHYS_RAM_BASE - XIP_OFFSET : \
> > > + (uintptr_t)(addr))
> > > +
> > > +#else
> > > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > > +#endif /* CONFIG_XIP_KERNEL */
> > > +
> > > +#else
> > > +
> > > +#define XIP_VIRT_ADDR(physaddr) physaddr
> > > +
> > > +#endif /* CONFIG_MMU */
> > > +
> >
> > Lot of defines above will not work for assembly sources.
> >
> > Keep only assembly friendly defines outside "#ifndef __ASSEMBLY__"
>
> Fair enough, will do.
>
> > > #ifndef __ASSEMBLY__
> > >
> > > /* Page Upper Directory not used in RISC-V */
> > > @@ -21,10 +57,6 @@
> > >
> > > #ifdef CONFIG_MMU
> > >
> > > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > > -
> > > #define BPF_JIT_REGION_SIZE (SZ_128M)
> > > #define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > > #define BPF_JIT_REGION_END (VMALLOC_END)
> > > @@ -467,8 +499,20 @@ static inline void __kernel_map_pages(struct page *page, int numpages, int enabl
> > >
> > > #define kern_addr_valid(addr) (1) /* FIXME */
> > >
> > > -extern void *dtb_early_va;
> > > -extern uintptr_t dtb_early_pa;
> > > +extern void *_dtb_early_va;
> > > +extern uintptr_t _dtb_early_pa;
> > > +#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> > > +
> > > +#define dtb_early_va (*(void **)__XIP_FIXUP(&_dtb_early_va))
> > > +#define dtb_early_pa (*(uintptr_t *)__XIP_FIXUP(&_dtb_early_pa))
> > > +
> > > +#else
> > > +
> > > +#define dtb_early_va _dtb_early_va
> > > +#define dtb_early_pa _dtb_early_pa
> > > +
> > > +#endif /* CONFIG_XIP_KERNEL */
> > > +
> > > void setup_bootmem(void);
> > > void paging_init(void);
> > >
> > > diff --git a/arch/riscv/kernel/cpu_ops_sbi.c b/arch/riscv/kernel/cpu_ops_sbi.c
> > > index 685fae72b7f5..9c8d6dab55b8 100644
> > > --- a/arch/riscv/kernel/cpu_ops_sbi.c
> > > +++ b/arch/riscv/kernel/cpu_ops_sbi.c
> > > @@ -59,6 +59,9 @@ static int sbi_cpu_start(unsigned int cpuid, struct task_struct *tidle)
> > > unsigned long boot_addr = __pa_symbol(secondary_start_sbi);
> > > int hartid = cpuid_to_hartid_map(cpuid);
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + boot_addr = XIP_PHYS_ADDR(secondary_start_sbi);
> > > +#endif
> >
> > You can avoid "#ifdef CONFIG_XIP_KERNEL" here by defining
> > XIP_PHYS_ADDR() to do nothing when XIP_KERNEL is disabled.
>
> That's right but I think it actually makes things harder to
> understand. Instead, I can implement a static inline helper like
> get_secondary_start_phys() which will return the appropriate value
> depending on the actual configuration. Does that sound reasonable?
Yes, that would be better.
Overall, I would also suggest to use more pre-processor tricks to
minimize "#ifdef" both in assembly and C sources.
>
> > > cpu_update_secondary_bootdata(cpuid, tidle);
> > > rc = sbi_hsm_hart_start(hartid, boot_addr, 0);
> > >
> > > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > > index 45dbdae930bf..6f065a5502d3 100644
> > > --- a/arch/riscv/kernel/head.S
> > > +++ b/arch/riscv/kernel/head.S
> > > @@ -9,11 +9,31 @@
> > > #include <linux/linkage.h>
> > > #include <asm/thread_info.h>
> > > #include <asm/page.h>
> > > +#include <asm/pgtable.h>
> > > #include <asm/csr.h>
> > > #include <asm/hwcap.h>
> > > #include <asm/image.h>
> > > #include "efi-header.S"
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +.macro XIP_FIXUP_OFFSET reg
> > > +#ifdef CONFIG_64BIT
> > > + ld t0, _xip_fixup
> > > +#else
> > > + lw t0, _xip_fixup
> > > +#endif
> > > + add \reg, \reg, t0
> > > +.endm
> > > +
> > > +_xip_fixup:
> > > +#ifdef CONFIG_64BIT
> > > + .dword CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> > > +#else
> > > + .word CONFIG_XIP_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
> > > +#endif
> > > +
> > > +#endif /* CONFIG_XIP_KERNEL */
> > > +
> > > __HEAD
> > > ENTRY(_start)
> > > /*
> > > @@ -64,7 +84,11 @@ pe_head_start:
> > > #ifdef CONFIG_MMU
> > > relocate:
> > > /* Relocate return address */
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + li a1, XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > > +#else
> > > li a1, PAGE_OFFSET
> > > +#endif
> > > la a2, _start
> > > sub a1, a1, a2
> > > add ra, ra, a1
> > > @@ -85,7 +109,12 @@ relocate:
> > > * full fence here because setup_vm() just wrote these PTEs and we need
> > > * to ensure the new translations are in use.
> > > */
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + la a0, _trampoline_pg_dir
> > > + XIP_FIXUP_OFFSET a0
> > > +#else
> > > la a0, trampoline_pg_dir
> > > +#endif
> > > srl a0, a0, PAGE_SHIFT
> > > or a0, a0, a1
> > > sfence.vma
> > > @@ -140,6 +169,10 @@ secondary_start_sbi:
> > > slli a3, a0, LGREG
> > > la a4, __cpu_up_stack_pointer
> > > la a5, __cpu_up_task_pointer
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + XIP_FIXUP_OFFSET a4
> > > + XIP_FIXUP_OFFSET a5
> > > +#endif
> > > add a4, a3, a4
> > > add a5, a3, a5
> > > REG_L sp, (a4)
> > > @@ -233,10 +266,24 @@ pmp_done:
> > >
> > > /* Pick one hart to run the main boot sequence */
> > > la a3, hart_lottery
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + XIP_FIXUP_OFFSET a3
> > > +#endif
> > > li a2, 1
> > > amoadd.w a3, a2, (a3)
> > > bnez a3, .Lsecondary_start
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + la sp, _end + THREAD_SIZE
> > > + XIP_FIXUP_OFFSET sp
> > > + mv s0, a0
> > > + call __copy_data
> > > +
> > > + /* Restore a0 copy */
> > > + mv a0, s0
> > > +#endif
> > > +
> > > +#ifndef CONFIG_XIP_KERNEL
> > > /* Clear BSS for flat non-ELF images */
> > > la a3, __bss_start
> > > la a4, __bss_stop
> > > @@ -246,19 +293,35 @@ clear_bss:
> > > add a3, a3, RISCV_SZPTR
> > > blt a3, a4, clear_bss
> > > clear_bss_done:
> > > -
> > > +#endif
> > > /* Save hart ID and DTB physical address */
> > > mv s0, a0
> > > mv s1, a1
> > > +
> > > la a2, boot_cpu_hartid
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + XIP_FIXUP_OFFSET a2
> > > +#endif
> > > REG_S a0, (a2)
> > >
> > > /* Initialize page tables and relocate to virtual addresses */
> > > la sp, init_thread_union + THREAD_SIZE
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + XIP_FIXUP_OFFSET sp
> > > +#endif
> > > +#if defined (CONFIG_XIP_KERNEL) && defined (CONFIG_BUILTIN_DTB)
> > > + la a0, __dtb_start
> > > +#else
> > > mv a0, s1
> > > +#endif
> > > call setup_vm
> > > #ifdef CONFIG_MMU
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + la a0, _early_pg_dir
> > > + XIP_FIXUP_OFFSET a0
> > > +#else
> > > la a0, early_pg_dir
> > > +#endif
> > > call relocate
> > > #endif /* CONFIG_MMU */
> > >
> > > @@ -284,6 +347,10 @@ clear_bss_done:
> > > slli a3, a0, LGREG
> > > la a1, __cpu_up_stack_pointer
> > > la a2, __cpu_up_task_pointer
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + XIP_FIXUP_OFFSET a1
> > > + XIP_FIXUP_OFFSET a2
> > > +#endif
> > > add a1, a3, a1
> > > add a2, a3, a2
> > >
> > > diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> > > index b48dda3d04f6..aabbc3ac3e48 100644
> > > --- a/arch/riscv/kernel/head.h
> > > +++ b/arch/riscv/kernel/head.h
> > > @@ -12,6 +12,9 @@ extern atomic_t hart_lottery;
> > >
> > > asmlinkage void do_page_fault(struct pt_regs *regs);
> > > asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +asmlinkage void __init __copy_data(void);
> > > +#endif
> > >
> > > extern void *__cpu_up_stack_pointer[];
> > > extern void *__cpu_up_task_pointer[];
> > > diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > > index a834deab31d3..876d4ff0ecc4 100644
> > > --- a/arch/riscv/kernel/setup.c
> > > +++ b/arch/riscv/kernel/setup.c
> > > @@ -50,7 +50,11 @@ struct screen_info screen_info __section(".data") = {
> > > * This is used before the kernel initializes the BSS so it can't be in the
> > > * BSS.
> > > */
> > > -atomic_t hart_lottery __section(".sdata");
> > > +atomic_t hart_lottery __section(".sdata")
> > > +#ifdef CONFIG_XIP_KERNEL
> > > += ATOMIC_INIT(1)
> > > +#endif
> > > +;
> > > unsigned long boot_cpu_hartid;
> > > static DEFINE_PER_CPU(struct cpu, cpu_devices);
> > >
> > > @@ -244,7 +248,7 @@ void __init setup_arch(char **cmdline_p)
> > > #if IS_ENABLED(CONFIG_BUILTIN_DTB)
> > > unflatten_and_copy_device_tree();
> > > #else
> > > - if (early_init_dt_verify(__va(dtb_early_pa)))
> > > + if (early_init_dt_verify(dtb_early_va))
> >
> > We can't use dtb_early_va here because early DTB mappings are only done
> > in early_pg_dir but not available in swapper_pg_dir.
>
> Well, as you can see if you look further down the patch, I do set
> dtb_early_va to __va(dtb_early_pa) for the non-XIP case.
Ahh, I see.
>
> > > unflatten_device_tree();
> > > else
> > > pr_err("No DTB found in kernel mappings\n");
> > > diff --git a/arch/riscv/kernel/vmlinux-xip.lds.S b/arch/riscv/kernel/vmlinux-xip.lds.S
> > > new file mode 100644
> > > index 000000000000..9f0f08c34cd3
> > > --- /dev/null
> > > +++ b/arch/riscv/kernel/vmlinux-xip.lds.S
> > > @@ -0,0 +1,132 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * Copyright (C) 2012 Regents of the University of California
> > > + * Copyright (C) 2017 SiFive
> > > + * Copyright (C) 2020 Vitaly Wool, Konsulko AB
> > > + */
> > > +
> > > +#define LOAD_OFFSET XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
> > > +/* No __ro_after_init data in the .rodata section - which will always be ro */
> > > +#define RO_AFTER_INIT_DATA
> > > +
> > > +#include <asm/vmlinux.lds.h>
> > > +#include <asm/page.h>
> > > +#include <asm/pgtable.h>
> > > +#include <asm/cache.h>
> > > +#include <asm/thread_info.h>
> > > +
> > > +OUTPUT_ARCH(riscv)
> > > +ENTRY(_start)
> > > +
> > > +jiffies = jiffies_64;
> > > +
> > > +SECTIONS
> > > +{
> > > + /* Beginning of code and text segment */
> > > + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
> > > + _xiprom = .;
> > > + _start = .;
> > > + HEAD_TEXT_SECTION
> > > + INIT_TEXT_SECTION(PAGE_SIZE)
> > > + /* we have to discard exit text and such at runtime, not link time */
> > > + .exit.text :
> > > + {
> > > + EXIT_TEXT
> > > + }
> > > +
> > > + .text : {
> > > + _text = .;
> > > + _stext = .;
> > > + TEXT_TEXT
> > > + SCHED_TEXT
> > > + CPUIDLE_TEXT
> > > + LOCK_TEXT
> > > + KPROBES_TEXT
> > > + ENTRY_TEXT
> > > + IRQENTRY_TEXT
> > > + SOFTIRQENTRY_TEXT
> > > + *(.fixup)
> > > + _etext = .;
> > > + }
> > > + RO_DATA(L1_CACHE_BYTES)
> > > + .srodata : {
> > > + *(.srodata*)
> > > + }
> > > + .init.rodata : {
> > > + INIT_SETUP(16)
> > > + INIT_CALLS
> > > + CON_INITCALL
> > > + INIT_RAM_FS
> > > + }
> > > + _exiprom = .; /* End of XIP ROM area */
> > > +
> > > +
> > > +/*
> > > + * From this point, stuff is considered writable and will be copied to RAM
> > > + */
> > > + __data_loc = ALIGN(16); /* location in file */
> > > + . = PAGE_OFFSET; /* location in memory */
> > > +
> > > + _sdata = .; /* Start of data section */
> > > + _data = .;
> > > + RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
> > > + _edata = .;
> > > + __start_ro_after_init = .;
> > > + .data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
> > > + *(.data..ro_after_init)
> > > + }
> > > + __end_ro_after_init = .;
> > > +
> > > + . = ALIGN(PAGE_SIZE);
> > > + __init_begin = .;
> > > + .init.data : {
> > > + INIT_DATA
> > > + }
> > > + .exit.data : {
> > > + EXIT_DATA
> > > + }
> > > + . = ALIGN(8);
> > > + __soc_early_init_table : {
> > > + __soc_early_init_table_start = .;
> > > + KEEP(*(__soc_early_init_table))
> > > + __soc_early_init_table_end = .;
> > > + }
> > > + __soc_builtin_dtb_table : {
> > > + __soc_builtin_dtb_table_start = .;
> > > + KEEP(*(__soc_builtin_dtb_table))
> > > + __soc_builtin_dtb_table_end = .;
> > > + }
> > > + PERCPU_SECTION(L1_CACHE_BYTES)
> > > +
> > > + . = ALIGN(PAGE_SIZE);
> > > + __init_end = .;
> > > +
> > > + .sdata : {
> > > + __global_pointer$ = . + 0x800;
> > > + *(.sdata*)
> > > + *(.sbss*)
> > > + }
> > > +
> > > + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> > > + EXCEPTION_TABLE(0x10)
> > > +
> > > + .rel.dyn : AT(ADDR(.rel.dyn) - LOAD_OFFSET) {
> > > + *(.rel.dyn*)
> > > + }
> > > +
> > > + /*
> > > + * End of copied data. We need a dummy section to get its LMA.
> > > + * Also located before final ALIGN() as trailing padding is not stored
> > > + * in the resulting binary file and useless to copy.
> > > + */
> > > + .data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
> > > + _edata_loc = LOADADDR(.data.endmark);
> > > +
> > > + . = ALIGN(PAGE_SIZE);
> > > + _end = .;
> > > +
> > > + STABS_DEBUG
> > > + DWARF_DEBUG
> > > +
> > > + DISCARDS
> > > +}
> >
> > Atish's patch series "[PATCH v3 0/5] Improve kernel section protections"
> > updates vmlinux.lds.S so take that as reference for your vmlinux-xip.lds.S
>
> vmlinux-xip loaded script doesn't have to be a carbon copy of the
> original one. Is there something special that you believe is needed
> for the XIP version?
Atish's series improves kernel strict mappings and in the process those
patches end-up re-organizing sections in linker script.
Make sure you test XIP + strict kernel mappings.
>
> > > diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> > > index de03cb22d0e9..6745ec325930 100644
> > > --- a/arch/riscv/kernel/vmlinux.lds.S
> > > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > > @@ -4,7 +4,12 @@
> > > * Copyright (C) 2017 SiFive
> > > */
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +#include "vmlinux-xip.lds.S"
> > > +#else
> > > +
> > > #define LOAD_OFFSET PAGE_OFFSET
> > > +
> > > #include <asm/vmlinux.lds.h>
> > > #include <asm/page.h>
> > > #include <asm/cache.h>
> > > @@ -132,3 +137,4 @@ SECTIONS
> > >
> > > DISCARDS
> > > }
> > > +#endif /* CONFIG_XIP_KERNEL */
> > > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > > index 87c305c566ac..8636432400df 100644
> > > --- a/arch/riscv/mm/init.c
> > > +++ b/arch/riscv/mm/init.c
> > > @@ -30,8 +30,8 @@ EXPORT_SYMBOL(empty_zero_page);
> > >
> > > extern char _start[];
> > > #define DTB_EARLY_BASE_VA PGDIR_SIZE
> > > -void *dtb_early_va __initdata;
> > > -uintptr_t dtb_early_pa __initdata;
> > > +void *_dtb_early_va __initdata;
> > > +uintptr_t _dtb_early_pa __initdata;
> > >
> > > struct pt_alloc_ops {
> > > pte_t *(*get_pte_virt)(phys_addr_t pa);
> > > @@ -87,6 +87,10 @@ static void print_vm_layout(void)
> > > (unsigned long)VMALLOC_END);
> > > print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
> > > (unsigned long)high_memory);
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + print_mlm("xip", (unsigned long)XIP_VIRT_ADDR_START,
> > > + (unsigned long)XIP_VIRT_ADDR_START + SZ_16M);
> > > +#endif /* CONFIG_XIP_KERNEL */
> > > }
> > > #else
> > > static void print_vm_layout(void) { }
> > > @@ -163,6 +167,10 @@ void __init setup_bootmem(void)
> > > phys_addr_t vmlinux_start = __pa_symbol(&_start);
> > > u64 i;
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + vmlinux_start = __pa_symbol(&_sdata);
> > > +#endif
> > > +
> > > /* Find the memory region containing the kernel */
> > > for_each_mem_range(i, &start, &end) {
> > > phys_addr_t size = end - start;
> > > @@ -194,11 +202,18 @@ void __init setup_bootmem(void)
> > > setup_initrd();
> > > #endif /* CONFIG_BLK_DEV_INITRD */
> > >
> > > - /*
> > > - * Avoid using early_init_fdt_reserve_self() since __pa() does
> > > - * not work for DTB pointers that are fixmap addresses
> > > - */
> > > - memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + if (dtb_early_pa < CONFIG_XIP_PHYS_ADDR ||
> > > + dtb_early_pa > CONFIG_XIP_PHYS_ADDR + SZ_16M)
> > > +#endif
> > > + {
> > > + /*
> > > + * Avoid using early_init_fdt_reserve_self() since __pa() does
> > > + * not work for DTB pointers that are fixmap addresses
> > > + */
> > > + memblock_reserve(dtb_early_pa, fdt_totalsize(dtb_early_va));
> > > + dtb_early_va = __va(dtb_early_pa);
> >
> > Drop this "dtb_early_va" assignment.
>
> See above.
This assignment deserve's a detailed comment for non-XIP case. Also, this
assignemt should be moved to setup_vm_final() where the switch from
early_pg_dir to swapper_pg_dir for boot CPU happens.
>
> > > + }
> > >
> > > early_init_fdt_scan_reserved_mem();
> > > dma_contiguous_reserve(dma32_phys_limit);
> > > @@ -206,21 +221,47 @@ void __init setup_bootmem(void)
> > > memblock_dump_all();
> > > }
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +
> > > +extern char _xiprom[], _exiprom[];
> > > +extern char _sdata[], _edata[];
> > > +
> > > +#endif /* CONFIG_XIP_KERNEL */
> > > +
> > > #ifdef CONFIG_MMU
> > > -static struct pt_alloc_ops pt_ops;
> > > +static struct pt_alloc_ops _pt_ops;
> > > +
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +#define pt_ops (*(struct pt_alloc_ops *)__XIP_FIXUP(&_pt_ops))
> > > +#else
> > > +#define pt_ops _pt_ops
> > > +#endif
> > >
> > > unsigned long va_pa_offset;
> > > EXPORT_SYMBOL(va_pa_offset);
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +#define va_pa_offset (*((unsigned long *)__XIP_FIXUP(&va_pa_offset)))
> > > +#endif
> > > unsigned long pfn_base;
> > > EXPORT_SYMBOL(pfn_base);
> > >
> > > pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > > -pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > > -pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> > >
> > > #define MAX_EARLY_MAPPING_SIZE SZ_128M
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +pgd_t _trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > > +pte_t _fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> > > +pgd_t _early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> > > +
> > > +#define trampoline_pg_dir ((pgd_t *)__XIP_FIXUP(_trampoline_pg_dir))
> > > +#define fixmap_pte ((pte_t *)__XIP_FIXUP(_fixmap_pte))
> > > +#define early_pg_dir ((pgd_t *)__XIP_FIXUP(_early_pg_dir))
> > > +#else
> > > +pgd_t trampoline_pg_dir[PTRS_PER_PGD] __page_aligned_bss;
> > > +pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> > > pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> > > +#endif /* CONFIG_XIP_KERNEL */
> > >
> > > void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot)
> > > {
> > > @@ -292,15 +333,27 @@ static void __init create_pte_mapping(pte_t *ptep,
> > >
> > > #ifndef __PAGETABLE_PMD_FOLDED
> > >
> > > -pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > -pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > -
> > > #if MAX_EARLY_MAPPING_SIZE < PGDIR_SIZE
> > > #define NUM_EARLY_PMDS 1UL
> > > #else
> > > #define NUM_EARLY_PMDS (1UL + MAX_EARLY_MAPPING_SIZE / PGDIR_SIZE)
> > > #endif
> > > +
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +pmd_t _trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > +pmd_t _fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > +pmd_t _xip_pmd[PTRS_PER_PGD * NUM_EARLY_PMDS] __page_aligned_bss;
> > > +pmd_t _early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
> > > +
> > > +#define trampoline_pmd ((pmd_t *)__XIP_FIXUP(_trampoline_pmd))
> > > +#define fixmap_pmd ((pmd_t *)__XIP_FIXUP(_fixmap_pmd))
> > > +#define xip_pmd ((pmd_t *)__XIP_FIXUP(_xip_pmd))
> > > +#define early_pmd ((pmd_t *)__XIP_FIXUP(_early_pmd))
> > > +#else
> > > +pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > +pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > > pmd_t early_pmd[PTRS_PER_PMD * NUM_EARLY_PMDS] __initdata __aligned(PAGE_SIZE);
> > > +#endif
> > >
> > > static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> > > {
> > > @@ -420,6 +473,19 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
> > > return PMD_SIZE;
> > > }
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > +/* called from head.S with MMU off */
> > > +asmlinkage void __init __copy_data(void)
> > > +{
> > > + void *from = (void *)(&_sdata);
> > > + void *end = (void *)(&_end);
> > > + void *to = (void *)CONFIG_XIP_PHYS_RAM_BASE;
> > > + size_t sz = (size_t)(end - from);
> > > +
> > > + memcpy(to, from, sz);
> > > +}
> > > +#endif
> > > +
> > > /*
> > > * setup_vm() is called from head.S with MMU-off.
> > > *
> > > @@ -448,6 +514,19 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > > pmd_t fix_bmap_spmd, fix_bmap_epmd;
> > > #endif
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + uintptr_t xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> > > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > > + uintptr_t xip_map_size = best_map_size(xiprom,
> > > + MAX_EARLY_MAPPING_SIZE);
> > > +
> > > + BUG_ON((xiprom % xip_map_size) != 0);
> > > + BUG_ON(xiprom_sz > MAX_EARLY_MAPPING_SIZE);
> > > +
> > > + load_pa = (uintptr_t)CONFIG_XIP_PHYS_RAM_BASE;
> > > + load_sz = (uintptr_t)(&_end) - (uintptr_t)(&_sdata);
> > > + map_size = best_map_size(load_pa, MAX_EARLY_MAPPING_SIZE);
> > > +#endif
> >
> > Add new line here.
> >
> > > va_pa_offset = PAGE_OFFSET - load_pa;
> > > pfn_base = PFN_DOWN(load_pa);
> > >
> > > @@ -487,6 +566,21 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > > load_pa, PGDIR_SIZE, PAGE_KERNEL_EXEC);
> > > #endif
> > >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + create_pgd_mapping(trampoline_pg_dir, XIP_VIRT_ADDR_START,
> > > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > > + for (va = XIP_VIRT_ADDR_START;
> > > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > > + va += PMD_SIZE) {
> > > + create_pmd_mapping(xip_pmd, va,
> > > + xiprom + (va - XIP_VIRT_ADDR_START),
> > > + PMD_SIZE, PAGE_KERNEL_EXEC);
> > > + }
> > > +
> > > + create_pgd_mapping(early_pg_dir, XIP_VIRT_ADDR_START,
> > > + (uintptr_t)xip_pmd, PGDIR_SIZE, PAGE_TABLE);
> > > +#endif
> > > +
> > > /*
> > > * Setup early PGD covering entire kernel which will allows
> > > * us to reach paging_init(). We map all memory banks later
> > > @@ -543,6 +637,9 @@ static void __init setup_vm_final(void)
> > > uintptr_t va, map_size;
> > > phys_addr_t pa, start, end;
> > > u64 i;
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + uintptr_t xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > > +#endif
> > >
> > > /**
> > > * MMU is enabled at this point. But page table setup is not complete yet.
> > > @@ -574,6 +671,25 @@ static void __init setup_vm_final(void)
> > > map_size, PAGE_KERNEL_EXEC);
> > > }
> > > }
> >
> > Add new line here.
> >
> > > +#ifdef CONFIG_XIP_KERNEL
> > > + for (va = XIP_VIRT_ADDR_START;
> > > + va < XIP_VIRT_ADDR_START + xiprom_sz;
> > > + va += PMD_SIZE)
> > > + create_pgd_mapping(swapper_pg_dir, va,
> > > + CONFIG_XIP_PHYS_ADDR + (va - XIP_VIRT_ADDR_START),
> > > + PMD_SIZE, PAGE_KERNEL_EXEC);
> > > +
> > > + /* if DT is in NOR, keep the early mapping */
> > > + if (dtb_early_pa >= CONFIG_XIP_PHYS_ADDR &&
> > > + dtb_early_pa <= CONFIG_XIP_PHYS_ADDR + SZ_16M) {
> > > + pa = dtb_early_pa & ~(PGDIR_SIZE - 1);
> > > + va = DTB_EARLY_BASE_VA;
> > > + create_pgd_mapping(swapper_pg_dir, va,
> > > + pa, PGDIR_SIZE, PAGE_KERNEL);
> > > + create_pgd_mapping(swapper_pg_dir, va + PGDIR_SIZE,
> > > + pa + PGDIR_SIZE, PGDIR_SIZE, PAGE_KERNEL);
> >
> > This is wasted of virtual address space for XIP kernel.
>
> For XIP cases we shouldn't care too much about virtual address space.
> We are saving RAM (and power, FWIW, but that's unrelated) :-)
>
> > Also, DTB_EARLY_BASE_VA is an adhoc address falling in user-space
> > address range.
>
> That's fair. Would you agree with me changing the mapping to point to
> somewhere between VMALLOC_END and XIP_VIRT_ADDR_START?
Please don't change DTB_EARLY_BASE_VA for the non-XIP case.
The mapping done by setup_vm() is really temporary and once boot CPU
switches to swapper_pg_dir we don't need DTB early mappings.
>
> > I would recommend XIP kernel to:
> > 1. Allocate memory for DTB using memblock_phys_alloc()
> > 2. The virtual addres of allocated memory can be found using __va()
> > 3. Copy DTB to allocated memory
> > 4. Set dtb_early_pa to new DTB location
>
> No, I don't want to copy DTB to RAM at all as long as I can avoid
> that. See also above, we have a goal of *saving* RAM. It is directly
> contradictory to this goal to waste up to 100+K of RAM.
>
> Again, what if I change DTB_EARLY_BASE_VA to be something like
> (XIP_VIRT_ADDR_START-2*PMD_SIZE) in the XIP case?
Maybe you can keep DTB_EARLY_BASE_VA as-is and introduce
XIP_DTB_VA define for mapping DTB in setup_vm_final() for the XIP case.
The non-XIP case does not need any DTB mappings in setup_vm_final().
Also, setup_vm_final() should do smaller mappings for the DTB instead
of PGDIR_SIZE mappings.
>
>
> > > + }
> > > +#endif
> > >
> > > /* Clear fixmap PTE and PMD mappings */
> > > clear_fixmap(FIX_PTE);
> > > --
> > > 2.29.2
> > >
> >
> > Regards,
> > Anup
>
> ...and thanks for the thorough review of course.
>
> Best regards,
> Vitaly
Regards,
Anup