Some Pro Controller compatible controllers do not support home LED, and
will fail when setting it. Currently this leads to probe failure.
Change the code that fails probing to deregistering home LED.
Signed-off-by: Icenowy Zheng <[email protected]>
---
drivers/hid/hid-nintendo.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 2204de889739..ed93287c3afc 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -1900,9 +1900,8 @@ static int joycon_leds_create(struct joycon_ctlr *ctlr)
/* Set the home LED to 0 as default state */
ret = joycon_home_led_brightness_set(led, 0);
if (ret) {
- hid_err(hdev, "Failed to set home LED dflt; ret=%d\n",
- ret);
- return ret;
+ hid_warn(hdev, "Failed to set home LED dflt, unregistering home LED");
+ devm_led_classdev_unregister(&hdev->dev, led);
}
}
--
2.35.1
Hi
Icenowy Zheng <[email protected]> wrote:
> Some Pro Controller compatible controllers do not support home LED, and
> will fail when setting it. Currently this leads to probe failure.
>
> Change the code that fails probing to deregistering home LED.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
Reviewed-by: Silvan Jegen <[email protected]>
I don't have a "Nintendo Pro Controller"-compatible controller to test
with but I have compiled a Kernel with this patch applied and can confirm
that the original Nintendo Pro Controller is still probed correctly with
this patch applied.
Cheers,
Silvan
Any updates on this patch? Would like to see this upstream, so that my
8bitdo pro 2 controller can work in switch mode again.
On Fri, Apr 15, 2022 at 6:06 AM Icenowy Zheng <[email protected]> wrote:
>
> Some Pro Controller compatible controllers do not support home LED, and
> will fail when setting it. Currently this leads to probe failure.
>
> Change the code that fails probing to deregistering home LED.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
> drivers/hid/hid-nintendo.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
> index 2204de889739..ed93287c3afc 100644
> --- a/drivers/hid/hid-nintendo.c
> +++ b/drivers/hid/hid-nintendo.c
> @@ -1900,9 +1900,8 @@ static int joycon_leds_create(struct joycon_ctlr *ctlr)
> /* Set the home LED to 0 as default state */
> ret = joycon_home_led_brightness_set(led, 0);
> if (ret) {
> - hid_err(hdev, "Failed to set home LED dflt; ret=%d\n",
> - ret);
> - return ret;
> + hid_warn(hdev, "Failed to set home LED dflt, unregistering home LED");
> + devm_led_classdev_unregister(&hdev->dev, led);
> }
> }
>
> --
> 2.35.1
>
Reviewed-by: Daniel J. Ogorchock <[email protected]>
Thanks for the patch. I haven't done any work to make the driver
compatible with non-official nintendo controllers. I suppose there
aren't many other options for controllers lacking full functionality
other than disabling those functions during probe, as demonstrated
here.
-Daniel
On Apr 15 2022, Icenowy Zheng wrote:
> Some Pro Controller compatible controllers do not support home LED, and
> will fail when setting it. Currently this leads to probe failure.
>
> Change the code that fails probing to deregistering home LED.
>
> Signed-off-by: Icenowy Zheng <[email protected]>
> ---
> drivers/hid/hid-nintendo.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
> index 2204de889739..ed93287c3afc 100644
> --- a/drivers/hid/hid-nintendo.c
> +++ b/drivers/hid/hid-nintendo.c
> @@ -1900,9 +1900,8 @@ static int joycon_leds_create(struct joycon_ctlr *ctlr)
> /* Set the home LED to 0 as default state */
> ret = joycon_home_led_brightness_set(led, 0);
> if (ret) {
> - hid_err(hdev, "Failed to set home LED dflt; ret=%d\n",
> - ret);
> - return ret;
> + hid_warn(hdev, "Failed to set home LED dflt, unregistering home LED");
I have s/dflt/default/ and applied to for-6.1/nintendo in hid.git
FWIW, I wondered really hard if we should or not clean up led->name that
devm_kzalloc-ed just a few lines above, but in the end it doesn't add
much to do it now instead of at remove time.
Thanks for the patch and the reviews!
Cheers,
Benjamin
> + devm_led_classdev_unregister(&hdev->dev, led);
> }
> }
>
> --
> 2.35.1
>