2020-02-24 19:34:59

by Atish Patra

[permalink] [raw]
Subject: [PATCH] RISC-V: Move all address space definition macros to one place

If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the
following compilation error.

---------------------------------------------------------------
./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
(first use in this function); did you mean ‘mem_map’?
#define __pfn_to_page(pfn) (vmemmap + (pfn))
^~~~~~~
./include/asm-generic/memory_model.h:82:21: note: in expansion of
macro ‘__pfn_to_page’

#define pfn_to_page __pfn_to_page
^~~~~~~~~~~~~
./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
‘pfn_to_page’
return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
---------------------------------------------------------------

Fix the compliation errors by moving all the address space definition
macros before including pgtable-64.h.

Cc: [email protected]
Fixes: 8ad8b72721d0 (riscv: Add KASAN support)

Signed-off-by: Atish Patra <[email protected]>
---
arch/riscv/include/asm/pgtable.h | 78 +++++++++++++++++---------------
1 file changed, 41 insertions(+), 37 deletions(-)

diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 453afb0a570a..4f6ee48a42e8 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -19,6 +19,47 @@
#include <asm/tlbflush.h>
#include <linux/mm_types.h>

+#ifdef CONFIG_MMU
+
+#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
+#define VMALLOC_END (PAGE_OFFSET - 1)
+#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
+
+#define BPF_JIT_REGION_SIZE (SZ_128M)
+#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
+#define BPF_JIT_REGION_END (VMALLOC_END)
+
+/*
+ * Roughly size the vmemmap space to be large enough to fit enough
+ * struct pages to map half the virtual address space. Then
+ * position vmemmap directly below the VMALLOC region.
+ */
+#define VMEMMAP_SHIFT \
+ (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
+#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
+#define VMEMMAP_END (VMALLOC_START - 1)
+#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
+
+/*
+ * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
+ * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
+ */
+#define vmemmap ((struct page *)VMEMMAP_START)
+
+#define PCI_IO_SIZE SZ_16M
+#define PCI_IO_END VMEMMAP_START
+#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
+
+#define FIXADDR_TOP PCI_IO_START
+#ifdef CONFIG_64BIT
+#define FIXADDR_SIZE PMD_SIZE
+#else
+#define FIXADDR_SIZE PGDIR_SIZE
+#endif
+#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
+#endif
+
#ifdef CONFIG_64BIT
#include <asm/pgtable-64.h>
#else
@@ -90,31 +131,6 @@ extern pgd_t swapper_pg_dir[];
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC

-#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
-#define VMALLOC_END (PAGE_OFFSET - 1)
-#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
-
-#define BPF_JIT_REGION_SIZE (SZ_128M)
-#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
-#define BPF_JIT_REGION_END (VMALLOC_END)
-
-/*
- * Roughly size the vmemmap space to be large enough to fit enough
- * struct pages to map half the virtual address space. Then
- * position vmemmap directly below the VMALLOC region.
- */
-#define VMEMMAP_SHIFT \
- (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
-#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
-#define VMEMMAP_END (VMALLOC_START - 1)
-#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
-
-/*
- * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
- * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
- */
-#define vmemmap ((struct page *)VMEMMAP_START)
-
static inline int pmd_present(pmd_t pmd)
{
return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
@@ -452,18 +468,6 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })

-#define PCI_IO_SIZE SZ_16M
-#define PCI_IO_END VMEMMAP_START
-#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
-
-#define FIXADDR_TOP PCI_IO_START
-#ifdef CONFIG_64BIT
-#define FIXADDR_SIZE PMD_SIZE
-#else
-#define FIXADDR_SIZE PGDIR_SIZE
-#endif
-#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
-
/*
* Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
* Note that PGDIR_SIZE must evenly divide TASK_SIZE.
--
2.25.0


2020-02-28 04:09:08

by Anup Patel

[permalink] [raw]
Subject: Re: [PATCH] RISC-V: Move all address space definition macros to one place

On Tue, Feb 25, 2020 at 1:04 AM Atish Patra <[email protected]> wrote:
>
> If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the
> following compilation error.
>
> ---------------------------------------------------------------
> ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
> ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
> (first use in this function); did you mean ‘mem_map’?
> #define __pfn_to_page(pfn) (vmemmap + (pfn))
> ^~~~~~~
> ./include/asm-generic/memory_model.h:82:21: note: in expansion of
> macro ‘__pfn_to_page’
>
> #define pfn_to_page __pfn_to_page
> ^~~~~~~~~~~~~
> ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
> ‘pfn_to_page’
> return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
> ---------------------------------------------------------------
>
> Fix the compliation errors by moving all the address space definition
> macros before including pgtable-64.h.
>
> Cc: [email protected]
> Fixes: 8ad8b72721d0 (riscv: Add KASAN support)
>
> Signed-off-by: Atish Patra <[email protected]>
> ---
> arch/riscv/include/asm/pgtable.h | 78 +++++++++++++++++---------------
> 1 file changed, 41 insertions(+), 37 deletions(-)
>
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index 453afb0a570a..4f6ee48a42e8 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -19,6 +19,47 @@
> #include <asm/tlbflush.h>
> #include <linux/mm_types.h>
>
> +#ifdef CONFIG_MMU
> +
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +#define BPF_JIT_REGION_SIZE (SZ_128M)
> +#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> +#define BPF_JIT_REGION_END (VMALLOC_END)
> +
> +/*
> + * Roughly size the vmemmap space to be large enough to fit enough
> + * struct pages to map half the virtual address space. Then
> + * position vmemmap directly below the VMALLOC region.
> + */
> +#define VMEMMAP_SHIFT \
> + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> +#define VMEMMAP_END (VMALLOC_START - 1)
> +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> +
> +/*
> + * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> + * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> + */
> +#define vmemmap ((struct page *)VMEMMAP_START)
> +
> +#define PCI_IO_SIZE SZ_16M
> +#define PCI_IO_END VMEMMAP_START
> +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> +
> +#define FIXADDR_TOP PCI_IO_START
> +#ifdef CONFIG_64BIT
> +#define FIXADDR_SIZE PMD_SIZE
> +#else
> +#define FIXADDR_SIZE PGDIR_SIZE
> +#endif
> +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> +
> +#endif
> +
> #ifdef CONFIG_64BIT
> #include <asm/pgtable-64.h>
> #else
> @@ -90,31 +131,6 @@ extern pgd_t swapper_pg_dir[];
> #define __S110 PAGE_SHARED_EXEC
> #define __S111 PAGE_SHARED_EXEC
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> -
> -#define BPF_JIT_REGION_SIZE (SZ_128M)
> -#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> -#define BPF_JIT_REGION_END (VMALLOC_END)
> -
> -/*
> - * Roughly size the vmemmap space to be large enough to fit enough
> - * struct pages to map half the virtual address space. Then
> - * position vmemmap directly below the VMALLOC region.
> - */
> -#define VMEMMAP_SHIFT \
> - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> -#define VMEMMAP_END (VMALLOC_START - 1)
> -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> -
> -/*
> - * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> - * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> - */
> -#define vmemmap ((struct page *)VMEMMAP_START)
> -
> static inline int pmd_present(pmd_t pmd)
> {
> return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
> @@ -452,18 +468,6 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> #define __swp_entry_to_pte(x) ((pte_t) { (x).val })
>
> -#define PCI_IO_SIZE SZ_16M
> -#define PCI_IO_END VMEMMAP_START
> -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> -
> -#define FIXADDR_TOP PCI_IO_START
> -#ifdef CONFIG_64BIT
> -#define FIXADDR_SIZE PMD_SIZE
> -#else
> -#define FIXADDR_SIZE PGDIR_SIZE
> -#endif
> -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> -
> /*
> * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
> * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
> --
> 2.25.0
>

Looks good to me. At least now all virtual memory layout related
defines are in one place.

Reviewed-by: Anup Patel <[email protected]>

Regards,
Anup

2020-02-28 18:23:52

by Atish Patra

[permalink] [raw]
Subject: Re: [PATCH] RISC-V: Move all address space definition macros to one place

On Fri, 2020-02-28 at 09:38 +0530, Anup Patel wrote:
> On Tue, Feb 25, 2020 at 1:04 AM Atish Patra <[email protected]>
> wrote:
> > If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get
> > the
> > following compilation error.
> >
> > ---------------------------------------------------------------
> > ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
> > ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’
> > undeclared
> > (first use in this function); did you mean ‘mem_map’?
> > #define __pfn_to_page(pfn) (vmemmap + (pfn))
> > ^~~~~~~
> > ./include/asm-generic/memory_model.h:82:21: note: in expansion of
> > macro ‘__pfn_to_page’
> >
> > #define pfn_to_page __pfn_to_page
> > ^~~~~~~~~~~~~
> > ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of
> > macro
> > ‘pfn_to_page’
> > return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
> > ---------------------------------------------------------------
> >
> > Fix the compliation errors by moving all the address space
> > definition
> > macros before including pgtable-64.h.
> >
> > Cc: [email protected]
> > Fixes: 8ad8b72721d0 (riscv: Add KASAN support)
> >
> > Signed-off-by: Atish Patra <[email protected]>
> > ---
> > arch/riscv/include/asm/pgtable.h | 78 +++++++++++++++++-----------
> > ----
> > 1 file changed, 41 insertions(+), 37 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/pgtable.h
> > b/arch/riscv/include/asm/pgtable.h
> > index 453afb0a570a..4f6ee48a42e8 100644
> > --- a/arch/riscv/include/asm/pgtable.h
> > +++ b/arch/riscv/include/asm/pgtable.h
> > @@ -19,6 +19,47 @@
> > #include <asm/tlbflush.h>
> > #include <linux/mm_types.h>
> >
> > +#ifdef CONFIG_MMU
> > +
> > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > +
> > +#define BPF_JIT_REGION_SIZE (SZ_128M)
> > +#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > +#define BPF_JIT_REGION_END (VMALLOC_END)
> > +
> > +/*
> > + * Roughly size the vmemmap space to be large enough to fit enough
> > + * struct pages to map half the virtual address space. Then
> > + * position vmemmap directly below the VMALLOC region.
> > + */
> > +#define VMEMMAP_SHIFT \
> > + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > +#define VMEMMAP_END (VMALLOC_START - 1)
> > +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > +
> > +/*
> > + * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if
> > kernel
> > + * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > + */
> > +#define vmemmap ((struct page *)VMEMMAP_START)
> > +
> > +#define PCI_IO_SIZE SZ_16M
> > +#define PCI_IO_END VMEMMAP_START
> > +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > +
> > +#define FIXADDR_TOP PCI_IO_START
> > +#ifdef CONFIG_64BIT
> > +#define FIXADDR_SIZE PMD_SIZE
> > +#else
> > +#define FIXADDR_SIZE PGDIR_SIZE
> > +#endif
> > +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > +
> > +#endif
> > +
> > #ifdef CONFIG_64BIT
> > #include <asm/pgtable-64.h>
> > #else
> > @@ -90,31 +131,6 @@ extern pgd_t swapper_pg_dir[];
> > #define __S110 PAGE_SHARED_EXEC
> > #define __S111 PAGE_SHARED_EXEC
> >
> > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > -
> > -#define BPF_JIT_REGION_SIZE (SZ_128M)
> > -#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > -#define BPF_JIT_REGION_END (VMALLOC_END)
> > -
> > -/*
> > - * Roughly size the vmemmap space to be large enough to fit enough
> > - * struct pages to map half the virtual address space. Then
> > - * position vmemmap directly below the VMALLOC region.
> > - */
> > -#define VMEMMAP_SHIFT \
> > - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > -#define VMEMMAP_END (VMALLOC_START - 1)
> > -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > -
> > -/*
> > - * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if
> > kernel
> > - * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > - */
> > -#define vmemmap ((struct page *)VMEMMAP_START)
> > -
> > static inline int pmd_present(pmd_t pmd)
> > {
> > return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
> > @@ -452,18 +468,6 @@ static inline int
> > ptep_clear_flush_young(struct vm_area_struct *vma,
> > #define __pte_to_swp_entry(pte) ((swp_entry_t) {
> > pte_val(pte) })
> > #define __swp_entry_to_pte(x) ((pte_t) { (x).val })
> >
> > -#define PCI_IO_SIZE SZ_16M
> > -#define PCI_IO_END VMEMMAP_START
> > -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > -
> > -#define FIXADDR_TOP PCI_IO_START
> > -#ifdef CONFIG_64BIT
> > -#define FIXADDR_SIZE PMD_SIZE
> > -#else
> > -#define FIXADDR_SIZE PGDIR_SIZE
> > -#endif
> > -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > -
> > /*
> > * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
> > * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
> > --
> > 2.25.0
> >
>
> Looks good to me. At least now all virtual memory layout related
> defines are in one place.
>
> Reviewed-by: Anup Patel <[email protected]>
>
> Regards,
> Anup
>

Hi Palmer,
I think this patch is a RC candidate. Can this be included in next PR ?

--
Regards,
Atish

2020-03-06 00:21:48

by Palmer Dabbelt

[permalink] [raw]
Subject: Re: [PATCH] RISC-V: Move all address space definition macros to one place

On Mon, 24 Feb 2020 11:34:36 PST (-0800), Atish Patra wrote:
> If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the
> following compilation error.
>
> ---------------------------------------------------------------
> ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
> ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
> (first use in this function); did you mean ‘mem_map’?
> #define __pfn_to_page(pfn) (vmemmap + (pfn))
> ^~~~~~~
> ./include/asm-generic/memory_model.h:82:21: note: in expansion of
> macro ‘__pfn_to_page’
>
> #define pfn_to_page __pfn_to_page
> ^~~~~~~~~~~~~
> ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
> ‘pfn_to_page’
> return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
> ---------------------------------------------------------------
>
> Fix the compliation errors by moving all the address space definition
> macros before including pgtable-64.h.
>
> Cc: [email protected]
> Fixes: 8ad8b72721d0 (riscv: Add KASAN support)
>
> Signed-off-by: Atish Patra <[email protected]>
> ---
> arch/riscv/include/asm/pgtable.h | 78 +++++++++++++++++---------------
> 1 file changed, 41 insertions(+), 37 deletions(-)
>
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index 453afb0a570a..4f6ee48a42e8 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -19,6 +19,47 @@
> #include <asm/tlbflush.h>
> #include <linux/mm_types.h>
>
> +#ifdef CONFIG_MMU
> +
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> +
> +#define BPF_JIT_REGION_SIZE (SZ_128M)
> +#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> +#define BPF_JIT_REGION_END (VMALLOC_END)
> +
> +/*
> + * Roughly size the vmemmap space to be large enough to fit enough
> + * struct pages to map half the virtual address space. Then
> + * position vmemmap directly below the VMALLOC region.
> + */
> +#define VMEMMAP_SHIFT \
> + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> +#define VMEMMAP_END (VMALLOC_START - 1)
> +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> +
> +/*
> + * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> + * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> + */
> +#define vmemmap ((struct page *)VMEMMAP_START)
> +
> +#define PCI_IO_SIZE SZ_16M
> +#define PCI_IO_END VMEMMAP_START
> +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> +
> +#define FIXADDR_TOP PCI_IO_START
> +#ifdef CONFIG_64BIT
> +#define FIXADDR_SIZE PMD_SIZE
> +#else
> +#define FIXADDR_SIZE PGDIR_SIZE
> +#endif
> +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> +
> +#endif
> +
> #ifdef CONFIG_64BIT
> #include <asm/pgtable-64.h>
> #else
> @@ -90,31 +131,6 @@ extern pgd_t swapper_pg_dir[];
> #define __S110 PAGE_SHARED_EXEC
> #define __S111 PAGE_SHARED_EXEC
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> -
> -#define BPF_JIT_REGION_SIZE (SZ_128M)
> -#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> -#define BPF_JIT_REGION_END (VMALLOC_END)
> -
> -/*
> - * Roughly size the vmemmap space to be large enough to fit enough
> - * struct pages to map half the virtual address space. Then
> - * position vmemmap directly below the VMALLOC region.
> - */
> -#define VMEMMAP_SHIFT \
> - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> -#define VMEMMAP_END (VMALLOC_START - 1)
> -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> -
> -/*
> - * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> - * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> - */
> -#define vmemmap ((struct page *)VMEMMAP_START)
> -
> static inline int pmd_present(pmd_t pmd)
> {
> return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
> @@ -452,18 +468,6 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> #define __swp_entry_to_pte(x) ((pte_t) { (x).val })
>
> -#define PCI_IO_SIZE SZ_16M
> -#define PCI_IO_END VMEMMAP_START
> -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> -
> -#define FIXADDR_TOP PCI_IO_START
> -#ifdef CONFIG_64BIT
> -#define FIXADDR_SIZE PMD_SIZE
> -#else
> -#define FIXADDR_SIZE PGDIR_SIZE
> -#endif
> -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> -
> /*
> * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
> * Note that PGDIR_SIZE must evenly divide TASK_SIZE.

While this isn't technically a fix, I'm inclined to target it for the RCs just
to avoid conflicts. I've put it on for-next now so the builders have some time
to chew on things, as I don't want to put in a non-fix too quickly.

Thanks!

2020-03-21 20:30:27

by David Abdurachmanov

[permalink] [raw]
Subject: Re: [PATCH] RISC-V: Move all address space definition macros to one place

On Fri, Mar 6, 2020 at 2:20 AM Palmer Dabbelt <[email protected]> wrote:
>
> On Mon, 24 Feb 2020 11:34:36 PST (-0800), Atish Patra wrote:
> > If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the
> > following compilation error.
> >
> > ---------------------------------------------------------------
> > ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
> > ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
> > (first use in this function); did you mean ‘mem_map’?
> > #define __pfn_to_page(pfn) (vmemmap + (pfn))
> > ^~~~~~~
> > ./include/asm-generic/memory_model.h:82:21: note: in expansion of
> > macro ‘__pfn_to_page’
> >
> > #define pfn_to_page __pfn_to_page
> > ^~~~~~~~~~~~~
> > ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
> > ‘pfn_to_page’
> > return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
> > ---------------------------------------------------------------
> >
> > Fix the compliation errors by moving all the address space definition
> > macros before including pgtable-64.h.
> >
> > Cc: [email protected]
> > Fixes: 8ad8b72721d0 (riscv: Add KASAN support)
> >
> > Signed-off-by: Atish Patra <[email protected]>
> > ---
> > arch/riscv/include/asm/pgtable.h | 78 +++++++++++++++++---------------
> > 1 file changed, 41 insertions(+), 37 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > index 453afb0a570a..4f6ee48a42e8 100644
> > --- a/arch/riscv/include/asm/pgtable.h
> > +++ b/arch/riscv/include/asm/pgtable.h
> > @@ -19,6 +19,47 @@
> > #include <asm/tlbflush.h>
> > #include <linux/mm_types.h>
> >
> > +#ifdef CONFIG_MMU
> > +
> > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > +
> > +#define BPF_JIT_REGION_SIZE (SZ_128M)
> > +#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > +#define BPF_JIT_REGION_END (VMALLOC_END)
> > +
> > +/*
> > + * Roughly size the vmemmap space to be large enough to fit enough
> > + * struct pages to map half the virtual address space. Then
> > + * position vmemmap directly below the VMALLOC region.
> > + */
> > +#define VMEMMAP_SHIFT \
> > + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > +#define VMEMMAP_END (VMALLOC_START - 1)
> > +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > +
> > +/*
> > + * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> > + * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > + */
> > +#define vmemmap ((struct page *)VMEMMAP_START)
> > +
> > +#define PCI_IO_SIZE SZ_16M
> > +#define PCI_IO_END VMEMMAP_START
> > +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > +
> > +#define FIXADDR_TOP PCI_IO_START
> > +#ifdef CONFIG_64BIT
> > +#define FIXADDR_SIZE PMD_SIZE
> > +#else
> > +#define FIXADDR_SIZE PGDIR_SIZE
> > +#endif
> > +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > +
> > +#endif
> > +
> > #ifdef CONFIG_64BIT
> > #include <asm/pgtable-64.h>
> > #else
> > @@ -90,31 +131,6 @@ extern pgd_t swapper_pg_dir[];
> > #define __S110 PAGE_SHARED_EXEC
> > #define __S111 PAGE_SHARED_EXEC
> >
> > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > -
> > -#define BPF_JIT_REGION_SIZE (SZ_128M)
> > -#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > -#define BPF_JIT_REGION_END (VMALLOC_END)
> > -
> > -/*
> > - * Roughly size the vmemmap space to be large enough to fit enough
> > - * struct pages to map half the virtual address space. Then
> > - * position vmemmap directly below the VMALLOC region.
> > - */
> > -#define VMEMMAP_SHIFT \
> > - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > -#define VMEMMAP_END (VMALLOC_START - 1)
> > -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > -
> > -/*
> > - * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> > - * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > - */
> > -#define vmemmap ((struct page *)VMEMMAP_START)
> > -
> > static inline int pmd_present(pmd_t pmd)
> > {
> > return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
> > @@ -452,18 +468,6 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> > #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> > #define __swp_entry_to_pte(x) ((pte_t) { (x).val })
> >
> > -#define PCI_IO_SIZE SZ_16M
> > -#define PCI_IO_END VMEMMAP_START
> > -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > -
> > -#define FIXADDR_TOP PCI_IO_START
> > -#ifdef CONFIG_64BIT
> > -#define FIXADDR_SIZE PMD_SIZE
> > -#else
> > -#define FIXADDR_SIZE PGDIR_SIZE
> > -#endif
> > -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > -
> > /*
> > * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
> > * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
>
> While this isn't technically a fix, I'm inclined to target it for the RCs just
> to avoid conflicts. I've put it on for-next now so the builders have some time
> to chew on things, as I don't want to put in a non-fix too quickly.

I hit the same issue in Fedora/RISCV while building kernel-5.6.0-0.rc6, and
we don't have KASAN selected. We do have CONFIG_SPARSEMEM_VMEMMAP
selected.

I will try this patch tomorrow.

>
> Thanks!

2020-03-23 10:34:01

by David Abdurachmanov

[permalink] [raw]
Subject: Re: [PATCH] RISC-V: Move all address space definition macros to one place

On Sat, Mar 21, 2020 at 10:29 PM David Abdurachmanov
<[email protected]> wrote:
>
> On Fri, Mar 6, 2020 at 2:20 AM Palmer Dabbelt <[email protected]> wrote:
> >
> > On Mon, 24 Feb 2020 11:34:36 PST (-0800), Atish Patra wrote:
> > > If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the
> > > following compilation error.
> > >
> > > ---------------------------------------------------------------
> > > ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
> > > ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
> > > (first use in this function); did you mean ‘mem_map’?
> > > #define __pfn_to_page(pfn) (vmemmap + (pfn))
> > > ^~~~~~~
> > > ./include/asm-generic/memory_model.h:82:21: note: in expansion of
> > > macro ‘__pfn_to_page’
> > >
> > > #define pfn_to_page __pfn_to_page
> > > ^~~~~~~~~~~~~
> > > ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
> > > ‘pfn_to_page’
> > > return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
> > > ---------------------------------------------------------------
> > >
> > > Fix the compliation errors by moving all the address space definition
> > > macros before including pgtable-64.h.
> > >
> > > Cc: [email protected]
> > > Fixes: 8ad8b72721d0 (riscv: Add KASAN support)
> > >
> > > Signed-off-by: Atish Patra <[email protected]>
> > > ---
> > > arch/riscv/include/asm/pgtable.h | 78 +++++++++++++++++---------------
> > > 1 file changed, 41 insertions(+), 37 deletions(-)
> > >
> > > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > > index 453afb0a570a..4f6ee48a42e8 100644
> > > --- a/arch/riscv/include/asm/pgtable.h
> > > +++ b/arch/riscv/include/asm/pgtable.h
> > > @@ -19,6 +19,47 @@
> > > #include <asm/tlbflush.h>
> > > #include <linux/mm_types.h>
> > >
> > > +#ifdef CONFIG_MMU
> > > +
> > > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > > +
> > > +#define BPF_JIT_REGION_SIZE (SZ_128M)
> > > +#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > > +#define BPF_JIT_REGION_END (VMALLOC_END)
> > > +
> > > +/*
> > > + * Roughly size the vmemmap space to be large enough to fit enough
> > > + * struct pages to map half the virtual address space. Then
> > > + * position vmemmap directly below the VMALLOC region.
> > > + */
> > > +#define VMEMMAP_SHIFT \
> > > + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > > +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > > +#define VMEMMAP_END (VMALLOC_START - 1)
> > > +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > > +
> > > +/*
> > > + * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> > > + * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > > + */
> > > +#define vmemmap ((struct page *)VMEMMAP_START)
> > > +
> > > +#define PCI_IO_SIZE SZ_16M
> > > +#define PCI_IO_END VMEMMAP_START
> > > +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > > +
> > > +#define FIXADDR_TOP PCI_IO_START
> > > +#ifdef CONFIG_64BIT
> > > +#define FIXADDR_SIZE PMD_SIZE
> > > +#else
> > > +#define FIXADDR_SIZE PGDIR_SIZE
> > > +#endif
> > > +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > > +
> > > +#endif
> > > +
> > > #ifdef CONFIG_64BIT
> > > #include <asm/pgtable-64.h>
> > > #else
> > > @@ -90,31 +131,6 @@ extern pgd_t swapper_pg_dir[];
> > > #define __S110 PAGE_SHARED_EXEC
> > > #define __S111 PAGE_SHARED_EXEC
> > >
> > > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > > -
> > > -#define BPF_JIT_REGION_SIZE (SZ_128M)
> > > -#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > > -#define BPF_JIT_REGION_END (VMALLOC_END)
> > > -
> > > -/*
> > > - * Roughly size the vmemmap space to be large enough to fit enough
> > > - * struct pages to map half the virtual address space. Then
> > > - * position vmemmap directly below the VMALLOC region.
> > > - */
> > > -#define VMEMMAP_SHIFT \
> > > - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > > -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > > -#define VMEMMAP_END (VMALLOC_START - 1)
> > > -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > > -
> > > -/*
> > > - * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> > > - * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > > - */
> > > -#define vmemmap ((struct page *)VMEMMAP_START)
> > > -
> > > static inline int pmd_present(pmd_t pmd)
> > > {
> > > return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
> > > @@ -452,18 +468,6 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> > > #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> > > #define __swp_entry_to_pte(x) ((pte_t) { (x).val })
> > >
> > > -#define PCI_IO_SIZE SZ_16M
> > > -#define PCI_IO_END VMEMMAP_START
> > > -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > > -
> > > -#define FIXADDR_TOP PCI_IO_START
> > > -#ifdef CONFIG_64BIT
> > > -#define FIXADDR_SIZE PMD_SIZE
> > > -#else
> > > -#define FIXADDR_SIZE PGDIR_SIZE
> > > -#endif
> > > -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > > -
> > > /*
> > > * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
> > > * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
> >
> > While this isn't technically a fix, I'm inclined to target it for the RCs just
> > to avoid conflicts. I've put it on for-next now so the builders have some time
> > to chew on things, as I don't want to put in a non-fix too quickly.
>
> I hit the same issue in Fedora/RISCV while building kernel-5.6.0-0.rc6, and
> we don't have KASAN selected. We do have CONFIG_SPARSEMEM_VMEMMAP
> selected.
>
> I will try this patch tomorrow.
>
Confirmed to solve my build errors with kernel in Fedora/RISCV.

david

2020-03-26 21:44:16

by Atish Patra

[permalink] [raw]
Subject: Re: [PATCH] RISC-V: Move all address space definition macros to one place

On Mon, Mar 23, 2020 at 3:32 AM David Abdurachmanov
<[email protected]> wrote:
>
> On Sat, Mar 21, 2020 at 10:29 PM David Abdurachmanov
> <[email protected]> wrote:
> >
> > On Fri, Mar 6, 2020 at 2:20 AM Palmer Dabbelt <[email protected]> wrote:
> > >
> > > On Mon, 24 Feb 2020 11:34:36 PST (-0800), Atish Patra wrote:
> > > > If both CONFIG_KASAN and CONFIG_SPARSEMEM_VMEMMAP are set, we get the
> > > > following compilation error.
> > > >
> > > > ---------------------------------------------------------------
> > > > ./arch/riscv/include/asm/pgtable-64.h: In function ‘pud_page’:
> > > > ./include/asm-generic/memory_model.h:54:29: error: ‘vmemmap’ undeclared
> > > > (first use in this function); did you mean ‘mem_map’?
> > > > #define __pfn_to_page(pfn) (vmemmap + (pfn))
> > > > ^~~~~~~
> > > > ./include/asm-generic/memory_model.h:82:21: note: in expansion of
> > > > macro ‘__pfn_to_page’
> > > >
> > > > #define pfn_to_page __pfn_to_page
> > > > ^~~~~~~~~~~~~
> > > > ./arch/riscv/include/asm/pgtable-64.h:70:9: note: in expansion of macro
> > > > ‘pfn_to_page’
> > > > return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
> > > > ---------------------------------------------------------------
> > > >
> > > > Fix the compliation errors by moving all the address space definition
> > > > macros before including pgtable-64.h.
> > > >
> > > > Cc: [email protected]
> > > > Fixes: 8ad8b72721d0 (riscv: Add KASAN support)
> > > >
> > > > Signed-off-by: Atish Patra <[email protected]>
> > > > ---
> > > > arch/riscv/include/asm/pgtable.h | 78 +++++++++++++++++---------------
> > > > 1 file changed, 41 insertions(+), 37 deletions(-)
> > > >
> > > > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > > > index 453afb0a570a..4f6ee48a42e8 100644
> > > > --- a/arch/riscv/include/asm/pgtable.h
> > > > +++ b/arch/riscv/include/asm/pgtable.h
> > > > @@ -19,6 +19,47 @@
> > > > #include <asm/tlbflush.h>
> > > > #include <linux/mm_types.h>
> > > >
> > > > +#ifdef CONFIG_MMU
> > > > +
> > > > +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > > > +#define VMALLOC_END (PAGE_OFFSET - 1)
> > > > +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > > > +
> > > > +#define BPF_JIT_REGION_SIZE (SZ_128M)
> > > > +#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > > > +#define BPF_JIT_REGION_END (VMALLOC_END)
> > > > +
> > > > +/*
> > > > + * Roughly size the vmemmap space to be large enough to fit enough
> > > > + * struct pages to map half the virtual address space. Then
> > > > + * position vmemmap directly below the VMALLOC region.
> > > > + */
> > > > +#define VMEMMAP_SHIFT \
> > > > + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > > > +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > > > +#define VMEMMAP_END (VMALLOC_START - 1)
> > > > +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > > > +
> > > > +/*
> > > > + * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> > > > + * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > > > + */
> > > > +#define vmemmap ((struct page *)VMEMMAP_START)
> > > > +
> > > > +#define PCI_IO_SIZE SZ_16M
> > > > +#define PCI_IO_END VMEMMAP_START
> > > > +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > > > +
> > > > +#define FIXADDR_TOP PCI_IO_START
> > > > +#ifdef CONFIG_64BIT
> > > > +#define FIXADDR_SIZE PMD_SIZE
> > > > +#else
> > > > +#define FIXADDR_SIZE PGDIR_SIZE
> > > > +#endif
> > > > +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > > > +
> > > > +#endif
> > > > +
> > > > #ifdef CONFIG_64BIT
> > > > #include <asm/pgtable-64.h>
> > > > #else
> > > > @@ -90,31 +131,6 @@ extern pgd_t swapper_pg_dir[];
> > > > #define __S110 PAGE_SHARED_EXEC
> > > > #define __S111 PAGE_SHARED_EXEC
> > > >
> > > > -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> > > > -#define VMALLOC_END (PAGE_OFFSET - 1)
> > > > -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> > > > -
> > > > -#define BPF_JIT_REGION_SIZE (SZ_128M)
> > > > -#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
> > > > -#define BPF_JIT_REGION_END (VMALLOC_END)
> > > > -
> > > > -/*
> > > > - * Roughly size the vmemmap space to be large enough to fit enough
> > > > - * struct pages to map half the virtual address space. Then
> > > > - * position vmemmap directly below the VMALLOC region.
> > > > - */
> > > > -#define VMEMMAP_SHIFT \
> > > > - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> > > > -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> > > > -#define VMEMMAP_END (VMALLOC_START - 1)
> > > > -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> > > > -
> > > > -/*
> > > > - * Define vmemmap for pfn_to_page & page_to_pfn calls. Needed if kernel
> > > > - * is configured with CONFIG_SPARSEMEM_VMEMMAP enabled.
> > > > - */
> > > > -#define vmemmap ((struct page *)VMEMMAP_START)
> > > > -
> > > > static inline int pmd_present(pmd_t pmd)
> > > > {
> > > > return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
> > > > @@ -452,18 +468,6 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> > > > #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> > > > #define __swp_entry_to_pte(x) ((pte_t) { (x).val })
> > > >
> > > > -#define PCI_IO_SIZE SZ_16M
> > > > -#define PCI_IO_END VMEMMAP_START
> > > > -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> > > > -
> > > > -#define FIXADDR_TOP PCI_IO_START
> > > > -#ifdef CONFIG_64BIT
> > > > -#define FIXADDR_SIZE PMD_SIZE
> > > > -#else
> > > > -#define FIXADDR_SIZE PGDIR_SIZE
> > > > -#endif
> > > > -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> > > > -
> > > > /*
> > > > * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
> > > > * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
> > >
> > > While this isn't technically a fix, I'm inclined to target it for the RCs just
> > > to avoid conflicts. I've put it on for-next now so the builders have some time
> > > to chew on things, as I don't want to put in a non-fix too quickly.
> >
> > I hit the same issue in Fedora/RISCV while building kernel-5.6.0-0.rc6, and
> > we don't have KASAN selected. We do have CONFIG_SPARSEMEM_VMEMMAP
> > selected.
> >

Yes. I just verified that. CONFIG_SPARSEMEM_VMEMMAP is enough to
trigger the build error.
The code that raises the compilation error is added by kasan patchset,
but it is not dependent upon kasan.

--- a/arch/riscv/include/asm/pgtable-64.h
+++ b/arch/riscv/include/asm/pgtable-64.h
@@ -58,6 +58,11 @@ static inline unsigned long pud_page_vaddr(pud_t pud)
return (unsigned long)pfn_to_virt(pud_val(pud) >> _PAGE_PFN_SHIFT);
}

+static inline struct page *pud_page(pud_t pud)
+{
+ return pfn_to_page(pud_val(pud) >> _PAGE_PFN_SHIFT);
+}
+

@palmer: I am not sure if it is too late for an RC-fix. If not, can
you send it as an RC-fix ?

Let me know if you want me to respin the patch editing the commit text.

> > I will try this patch tomorrow.
> >
> Confirmed to solve my build errors with kernel in Fedora/RISCV.
>
> david
>


--
Regards,
Atish