v2 Changes:
- Fixed Kernel Test Bot issues.
- Removed ".../devicetree/bindings/mailbox/fsl,muap.txt"
v1:
The Messaging Unit module enables two processing elements within the SoC to
communicate and coordinate by passing messages (e.g., data, status and control)
through its interfaces.
The NXP i.MX EdgeLock Enclave Message Unit (ELE-MUAP) is specifically targeted
for use between application core and Edgelocke Enclave. It allows to send
messages to the EL Enclave using a shared mailbox.
Patch-set add the ELE-MU kernel driver for exchanging messages with i.MX NXP
ELE IP; both from:
- User-Space Applications via character driver.
- Kernel-space, used by kernel management layers like DM-Crypt.
Pankaj Gupta (7):
doc: device tree binding addition for ele MU
arm64: dts: imx93-11x11-evk: added ele-mu
arm64: dts: imx93-11x11-evk: reserved mem-ranges to constrain ele-mu
dma-range
arm64: dts: imx8ulp-evk: added ele-mu
arm64: dts: imx8ulp-evk: reserved mem-ranges to constrain ele-mu
dma-range
firmware: imx: add ELE MU driver support
MAINTAINERS: Added maintainer details
.../bindings/arm/freescale/fsl,ele_mu.yaml | 139 ++
MAINTAINERS | 7 +
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 15 +
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 13 +-
.../boot/dts/freescale/imx93-11x11-evk.dts | 15 +
arch/arm64/boot/dts/freescale/imx93.dtsi | 11 +-
drivers/firmware/imx/Kconfig | 11 +
drivers/firmware/imx/Makefile | 2 +
drivers/firmware/imx/ele_base_msg.c | 378 +++++
drivers/firmware/imx/ele_mu.c | 1285 +++++++++++++++++
drivers/firmware/imx/ele_mu.h | 174 +++
include/linux/firmware/imx/ele_base_msg.h | 67 +
include/linux/firmware/imx/ele_mu_ioctl.h | 52 +
13 files changed, 2167 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
create mode 100644 drivers/firmware/imx/ele_base_msg.c
create mode 100644 drivers/firmware/imx/ele_mu.c
create mode 100644 drivers/firmware/imx/ele_mu.h
create mode 100644 include/linux/firmware/imx/ele_base_msg.h
create mode 100644 include/linux/firmware/imx/ele_mu_ioctl.h
--
2.34.1
Documentation update with addition of new device tree
for NXP ele-mu (Edgelock Enclave Message Unit), driver.
Signed-off-by: Pankaj Gupta <[email protected]>
---
.../bindings/arm/freescale/fsl,ele_mu.yaml | 139 ++++++++++++++++++
1 file changed, 139 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
new file mode 100644
index 000000000000..8c4cc32f62ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/freescale/fsl,ele_mu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX EdgeLock Enclave MUAP driver
+
+maintainers:
+ - Pankaj Gupta <[email protected]>
+
+description: |
+
+ NXP i.MX EdgeLock Enclave Message Unit Driver.
+ The Messaging Unit module enables two processing elements within the SoC to
+ communicate and coordinate by passing messages (e.g., data, status and control)
+ through its interfaces.
+
+ The NXP i.MX EdgeLock Enclave Message Unit (ELE-MUAP) is specifically targeted
+ for use between application core and Edgelocke Enclave. It allows to send
+ messages to the EL Enclave using a shared mailbox.
+
+ The messages must follow the protocol defined.
+
+ Non-Secure + Secure
+ |
+ |
+ +---------+ +-------------+ |
+ | ele_mu.c+<---->+imx-mailbox.c| |
+ | | | mailbox.c +<-->+------+ +------+
+ +---+-----+ +-------------+ | MU X +<-->+ ELE |
+ | +------+ +------+
+ +----------------+ |
+ | | |
+ v v |
+ logical logical |
+ receiver waiter |
+ + + |
+ | | |
+ | | |
+ | +----+------+ |
+ | | | |
+ | | | |
+ device_ctx device_ctx device_ctx |
+ |
+ User 0 User 1 User Y |
+ +------+ +------+ +------+ |
+ |misc.c| |misc.c| |misc.c| |
+ kernel space +------+ +------+ +------+ |
+ |
+ +------------------------------------------------------ |
+ | | | |
+ userspace /dev/ele_muXch0 | | |
+ /dev/ele_muXch1 | |
+ /dev/ele_muXchY |
+ |
+
+ When a user sends a command to the ELE, it registers its device_ctx as
+ waiter of a response from ELE.
+
+ A user can be registered as receiver of command from the ELE.
+ Create char devices in /dev as channels of the form /dev/ele_muXchY with X
+ the id of the driver and Y for each users. It allows to send and receive
+ messages to the NXP EdgeLock Enclave IP on NXP SoC, where current possible
+ value, i.e., supported SoC(s) are imx8ulp, imx93.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx-ele
+ - fsl,imx93-ele
+
+ mboxes:
+ description:
+ List of <&phandle type channel> - 4 channels for TX, 4 channels for RX,
+ 1 channel for TXDB
+ maxItems: 9
+
+ mbox-names:
+ items:
+ - const: tx
+ - const: rx
+
+ fsl,ele_mu_did:
+ description:
+ Owner of message-unit, is identified via Domain ID or did.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1, 2, 3, 4, 5, 6, 7]
+
+ fsl,ele_mu_id:
+ description:
+ Identifier to the message-unit among the multiple message-unit that exists on SoC.
+ It is used to create the channels, default to 2
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1, 2, 3]
+
+ fsl,ele_max_users:
+ description:
+ Number of misclleneous devices to be created, default to 4
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
+
+ fsl,cmd_tag:
+ description:
+ Tag in message header for commands on this MU, default to 0x17
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint8
+ - enum: [0x17, 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e]
+
+ fsl,rsp_tag:
+ description:
+ Tag in message header for responses on this MU, default to 0xe1
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint8
+ - enum: [0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8]
+
+required:
+ - compatible
+ - mboxes
+ - mbox-names
+
+additionalProperties: false
+
+examples:
+ - |
+ ele_mu: ele_mu {
+ compatible = "fsl,imx93-ele";
+ mbox-names = "tx", "rx";
+ mboxes = <&s4muap 2 0
+ &s4muap 3 0>;
+
+ fsl,ele_mu_id = <1>;
+ fsl,ele_max_users = <4>;
+ fsl,cmd_tag = /bits/ 8 <0x17>;
+ fsl,rsp_tag = /bits/ 8 <0xe1>;
+ };
--
2.34.1
EdgeLock Enclave are has a hardware limitation of restricted access
to the DDR memory range:
- 0x80000000 0x9FFFFFFF
ELE-MU driver requireis 1MB of memory. In this patch the we are reserving
1MB of ddr memory region from the lower 32-bit range.
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Pankaj Gupta <[email protected]>
---
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index fefb93487291..bb090300829e 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -7,6 +7,10 @@
#include "imx93.dtsi"
+&ele_mu {
+ memory-region = <&ele_reserved>;
+};
+
/ {
model = "NXP i.MX93 11X11 EVK board";
compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
@@ -22,6 +26,17 @@ reg_vref_1v8: regulator-adc-vref {
regulator-max-microvolt = <1800000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ ele_reserved: ele-reserved@a4120000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa4120000 0 0x100000>;
+ no-map;
+ };
+ };
+
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
--
2.34.1
adde support for ele-mu for imx93-11x11-evk.
Signed-off-by: Pankaj Gupta <[email protected]>
---
arch/arm64/boot/dts/freescale/imx93.dtsi | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 41efd97dd6d6..ffb7cb8ed228 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * Copyright 2022 NXP
+ * Copyright 2022-2022 NXP
*/
#include <dt-bindings/clock/imx93-clock.h>
@@ -741,5 +741,14 @@ media_blk_ctrl: system-controller@4ac10000 {
#power-domain-cells = <1>;
status = "disabled";
};
+ ele_mu: ele-mu {
+ compatible = "fsl,imx93-ele";
+ mboxes = <&s4muap 0 0 &s4muap 1 0>;
+ mbox-names = "tx", "rx";
+ fsl,ele_mu_did = <3>;
+ fsl,ele_mu_id = <2>;
+ fsl,ele_mu_max_users = <4>;
+ status = "okay";
+ };
};
};
--
2.34.1
added support for ele-mu for imx8ulp-evk.
Signed-off-by: Pankaj Gupta <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 32193a43ff49..2ab240258a67 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -113,7 +113,7 @@ sosc: clock-sosc {
#clock-cells = <0>;
};
- sram@2201f000 {
+ sram0: sram@2201f000 {
compatible = "mmio-sram";
reg = <0x0 0x2201f000 0x0 0x1000>;
@@ -160,6 +160,17 @@ s4muap: mailbox@27020000 {
#mbox-cells = <2>;
};
+ ele_mu: ele-mu {
+ compatible = "fsl,imx-ele";
+ mboxes = <&s4muap 0 0 &s4muap 1 0>;
+ mbox-names = "tx", "rx";
+ fsl,ele_mu_did = <7>;
+ fsl,ele_mu_id = <2>;
+ fsl,ele_mu_max_users = <4>;
+ status = "okay";
+ sram-pool = <&sram0>;
+ };
+
per_bridge3: bus@29000000 {
compatible = "simple-bus";
reg = <0x29000000 0x800000>;
--
2.34.1
EdgeLock Enclave are has a hardware limitation of restricted access
to the DDR memory range:
- 0x90000000 - 0xAFFFFFFF
ELE-MU driver requireis 1MB of memory. In this patch the we are reserving
1MB of ddr memory region from the lower 32-bit range.
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Pankaj Gupta <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
index f1c6d933a17c..d2a39e9aa951 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
@@ -19,6 +19,17 @@ memory@80000000 {
device_type = "memory";
reg = <0x0 0x80000000 0 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ele_reserved: ele-reserved@90000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0x90000000 0 0x100000>;
+ no-map;
+ };
+ };
clock_ext_rmii: clock-ext-rmii {
compatible = "fixed-clock";
@@ -53,6 +64,10 @@ &usdhc0 {
status = "okay";
};
+&ele_mu {
+ memory-region = <&ele_reserved>;
+};
+
&fec {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_enet>;
--
2.34.1
The Edgelock Enclave Message Unit (ELE MU), is a message based
communication channel, to communicated with ELE Firmware.
This runs on a dedicated MU present between application core and
ELE H/W IP. It exists on some i.MX processors. e.g. i.MX8ULP, i.MX93
This patch implements the mail-box based communication with
ELE firmware.
Signed-off-by: Gaurav Jain <[email protected]>
Signed-off-by: Pankaj Gupta <[email protected]>
Reported-by: kernel test robot <[email protected]>
---
drivers/firmware/imx/Kconfig | 11 +
drivers/firmware/imx/Makefile | 2 +
drivers/firmware/imx/ele_base_msg.c | 378 ++++++
drivers/firmware/imx/ele_mu.c | 1285 +++++++++++++++++++++
drivers/firmware/imx/ele_mu.h | 174 +++
include/linux/firmware/imx/ele_base_msg.h | 67 ++
include/linux/firmware/imx/ele_mu_ioctl.h | 52 +
7 files changed, 1969 insertions(+)
create mode 100644 drivers/firmware/imx/ele_base_msg.c
create mode 100644 drivers/firmware/imx/ele_mu.c
create mode 100644 drivers/firmware/imx/ele_mu.h
create mode 100644 include/linux/firmware/imx/ele_base_msg.h
create mode 100644 include/linux/firmware/imx/ele_mu_ioctl.h
diff --git a/drivers/firmware/imx/Kconfig b/drivers/firmware/imx/Kconfig
index c027d99f2a59..eef6c6a8b61d 100644
--- a/drivers/firmware/imx/Kconfig
+++ b/drivers/firmware/imx/Kconfig
@@ -28,3 +28,14 @@ config IMX_SCU_PD
depends on IMX_SCU
help
The System Controller Firmware (SCFW) based power domain driver.
+
+config IMX_EL_ENCLAVE
+ tristate "i.MX Embedded EdgeLock Enclave support."
+ depends on IMX_MBOX && ARCH_MXC && ARM64
+ default m if ARCH_MXC
+
+ help
+ It is possible to use APIs exposed by the iMX EdgeLock Enclave like base, HSM &
+ SHE using the SAB protocol via the shared Messaging Unit. This driver exposes
+ these interfaces via a set of file descriptors allowing to configure shared
+ memory, send and receive messages.
diff --git a/drivers/firmware/imx/Makefile b/drivers/firmware/imx/Makefile
index b76acbade2a0..886385e79bf2 100644
--- a/drivers/firmware/imx/Makefile
+++ b/drivers/firmware/imx/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_IMX_DSP) += imx-dsp.o
obj-$(CONFIG_IMX_SCU) += imx-scu.o misc.o imx-scu-irq.o rm.o imx-scu-soc.o
obj-$(CONFIG_IMX_SCU_PD) += scu-pd.o
+el_enclave-objs = ele_mu.o ele_base_msg.o
+obj-${CONFIG_IMX_EL_ENCLAVE} += el_enclave.o
diff --git a/drivers/firmware/imx/ele_base_msg.c b/drivers/firmware/imx/ele_base_msg.c
new file mode 100644
index 000000000000..34221288dfd1
--- /dev/null
+++ b/drivers/firmware/imx/ele_base_msg.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021-2023 NXP
+ */
+
+#include <linux/types.h>
+#include <linux/completion.h>
+
+#include <linux/firmware/imx/ele_base_msg.h>
+#include <linux/firmware/imx/ele_mu_ioctl.h>
+
+#include "ele_mu.h"
+
+/* Fill a command message header with a given command ID and length in bytes. */
+static int plat_fill_cmd_msg_hdr(struct mu_hdr *hdr,
+ uint8_t cmd,
+ uint32_t len)
+{
+ struct ele_mu_priv *priv = NULL;
+ int err;
+
+ err = get_ele_mu_priv(&priv);
+ if (err) {
+ pr_err("Error: iMX EdgeLock Enclave MU, used before probing.\n");
+ return err;
+ }
+
+ hdr->tag = priv->cmd_tag;
+ hdr->ver = ELE_BASE_API_VERSION;
+ hdr->command = cmd;
+ hdr->size = len >> 2;
+
+ return err;
+}
+
+static u32 plat_add_msg_crc(uint32_t *msg, uint32_t msg_len)
+{
+ uint32_t i;
+ uint32_t crc = 0;
+ uint32_t nb_words = msg_len >> 2;
+
+ for (i = 0; i < nb_words - 1; i++)
+ crc ^= *(msg + i);
+
+ return crc;
+}
+
+int imx_ele_msg_send_rcv(struct ele_mu_priv *priv)
+{
+ unsigned int wait;
+ int err;
+
+ mutex_lock(&priv->mu_cmd_lock);
+ mutex_lock(&priv->mu_lock);
+
+ err = mbox_send_message(priv->tx_chan, &priv->tx_msg);
+ if (err < 0) {
+ pr_err("Error: mbox_send_message failure.\n");
+ mutex_unlock(&priv->mu_lock);
+ return err;
+ }
+ mutex_unlock(&priv->mu_lock);
+
+ wait = msecs_to_jiffies(1000);
+ if (!wait_for_completion_timeout(&priv->done, wait)) {
+ pr_err("Error: wait_for_completion timed out.\n");
+ err = -ETIMEDOUT;
+ }
+
+ mutex_unlock(&priv->mu_cmd_lock);
+ /* As part of func ele_mu_rx_callback() execution,
+ * response will copied to ele_msg->rsp_msg.
+ *
+ * Lock: (mutex_unlock(&ele_mu_priv->mu_cmd_lock),
+ * will be unlocked if it is a response.
+ */
+
+ return err;
+}
+
+static int read_otp_uniq_id(struct ele_mu_priv *priv, u32 *value)
+{
+ unsigned int tag, command, size, ver, status;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+
+ if (tag == priv->rsp_tag &&
+ command == ELE_READ_FUSE_REQ &&
+ size == ELE_READ_FUSE_RSP_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ value[0] = priv->rx_msg.data[1];
+ value[1] = priv->rx_msg.data[2];
+ value[2] = priv->rx_msg.data[3];
+ value[3] = priv->rx_msg.data[4];
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static int read_fuse_word(struct ele_mu_priv *priv, u32 *value)
+{
+ unsigned int tag, command, size, ver, status;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+
+ if (tag == priv->rsp_tag &&
+ command == ELE_READ_FUSE_REQ &&
+ size == ELE_READ_FUSE_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ value[0] = priv->rx_msg.data[1];
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+int read_common_fuse(uint16_t fuse_id, u32 *value)
+{
+ struct ele_mu_priv *priv = NULL;
+ int err;
+
+ err = get_ele_mu_priv(&priv);
+ if (err) {
+ pr_err("Error: iMX EdgeLock Enclave MU, used before probing.\n");
+ return err;
+ }
+ err = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_READ_FUSE_REQ, 8);
+ if (err) {
+ pr_err("Error: plat_fill_cmd_msg_hdr failed.\n");
+ return err;
+ }
+
+ priv->tx_msg.data[0] = fuse_id;
+ err = imx_ele_msg_send_rcv(priv);
+ if (err < 0)
+ return err;
+
+ switch (fuse_id) {
+ case OTP_UNIQ_ID:
+ err = read_otp_uniq_id(priv, value);
+ break;
+ default:
+ err = read_fuse_word(priv, value);
+ break;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(read_common_fuse);
+
+int ele_ping(void)
+{
+ struct ele_mu_priv *priv = NULL;
+ unsigned int tag, command, size, ver, status;
+ int err;
+
+ err = get_ele_mu_priv(&priv);
+ if (err) {
+ pr_err("Error: iMX EdgeLock Enclave MU, used before probing.\n");
+ return err;
+ }
+ err = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_PING_REQ, 4);
+ if (err) {
+ pr_err("Error: plat_fill_cmd_msg_hdr failed.\n");
+ return err;
+ }
+
+ err = imx_ele_msg_send_rcv(priv);
+ if (err < 0)
+ return err;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+
+ if (tag == priv->rsp_tag && command == ELE_PING_REQ &&
+ size == ELE_PING_REQ_MSG_SZ && ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND)
+ return 0;
+
+ return -EAGAIN;
+}
+EXPORT_SYMBOL_GPL(ele_ping);
+
+int ele_service_swap(phys_addr_t addr, u32 addr_size, u16 flag)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_SERVICE_SWAP_REQ, 24);
+ if (ret)
+ return ret;
+
+ priv->tx_msg.data[0] = flag;
+ priv->tx_msg.data[1] = addr_size;
+ priv->tx_msg.data[2] = ELE_NONE_VAL;
+ priv->tx_msg.data[3] = lower_32_bits(addr);
+ priv->tx_msg.data[4] = plat_add_msg_crc((uint32_t *)&priv->tx_msg, 24);
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_SERVICE_SWAP_REQ &&
+ size == ELE_SERVICE_SWAP_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ if (flag == ELE_IMEM_EXPORT)
+ return priv->rx_msg.data[1];
+ else
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_service_swap);
+
+int ele_get_info(phys_addr_t addr, u32 data_size)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_GET_INFO_REQ, 16);
+ if (ret)
+ return ret;
+
+ priv->tx_msg.data[0] = upper_32_bits(addr);
+ priv->tx_msg.data[1] = lower_32_bits(addr);
+ priv->tx_msg.data[2] = data_size;
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_GET_INFO_REQ &&
+ size == ELE_GET_INFO_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND)
+ return 0;
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_get_info);
+
+/*
+ * ele_get_trng_state() - prepare and send the command to read
+ * crypto lib and TRNG state
+ * TRNG state
+ * 0x1 TRNG is in program mode
+ * 0x2 TRNG is still generating entropy
+ * 0x3 TRNG entropy is valid and ready to be read
+ * 0x4 TRNG encounter an error while generating entropy
+ *
+ * CSAL state
+ * 0x0 Crypto Lib random context initialization is not done yet
+ * 0x1 Crypto Lib random context initialization is on-going
+ * 0x2 Crypto Lib random context initialization succeed
+ * 0x3 Crypto Lib random context initialization failed
+ *
+ * returns: csal and trng state.
+ *
+ */
+int ele_get_trng_state(void)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ /* access ele_mu_priv data structure pointer*/
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_GET_TRNG_STATE_REQ, 4);
+ if (ret)
+ return ret;
+
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_GET_TRNG_STATE_REQ &&
+ size == ELE_GET_TRNG_STATE_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ return (priv->rx_msg.data[1] & CSAL_TRNG_STATE_MASK);
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_get_trng_state);
+
+/*
+ * ele_start_rng() - prepare and send the command to start
+ * initialization of the ELE RNG context
+ *
+ * returns: 0 on success.
+ */
+int ele_start_rng(void)
+{
+ struct ele_mu_priv *priv;
+ int ret;
+ unsigned int tag, command, size, ver, status;
+
+ /* access ele_mu_priv data structure pointer*/
+ ret = get_ele_mu_priv(&priv);
+ if (ret)
+ return ret;
+
+ ret = plat_fill_cmd_msg_hdr((struct mu_hdr *)&priv->tx_msg.header,
+ ELE_START_RNG_REQ, 4);
+ if (ret)
+ return ret;
+
+ ret = imx_ele_msg_send_rcv(priv);
+ if (ret < 0)
+ return ret;
+
+ tag = MSG_TAG(priv->rx_msg.header);
+ command = MSG_COMMAND(priv->rx_msg.header);
+ size = MSG_SIZE(priv->rx_msg.header);
+ ver = MSG_VER(priv->rx_msg.header);
+ status = RES_STATUS(priv->rx_msg.data[0]);
+ if (tag == priv->rsp_tag &&
+ command == ELE_START_RNG_REQ &&
+ size == ELE_START_RNG_REQ_MSG_SZ &&
+ ver == ELE_BASE_API_VERSION &&
+ status == ELE_SUCCESS_IND) {
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(ele_start_rng);
diff --git a/drivers/firmware/imx/ele_mu.c b/drivers/firmware/imx/ele_mu.c
new file mode 100644
index 000000000000..41653429f7e2
--- /dev/null
+++ b/drivers/firmware/imx/ele_mu.c
@@ -0,0 +1,1285 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021-2023 NXP
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/completion.h>
+#include <linux/dev_printk.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/firmware/imx/ele_base_msg.h>
+#include <linux/firmware/imx/ele_mu_ioctl.h>
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/miscdevice.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/sys_soc.h>
+#include <linux/workqueue.h>
+
+#include "ele_mu.h"
+
+#define ELE_PING_INTERVAL (3600 * HZ)
+#define ELE_TRNG_STATE_OK 0x203
+#define ELE_GET_TRNG_STATE_RETRY_COUNT 0x5
+
+#define ELE_GET_INFO_BUFF_SZ 0x100
+#define ELE_GET_INFO_READ_SZ 0xA0
+#define ELE_IMEM_SIZE 0x10000
+#define ELE_IMEM_STATE_OK 0xCA
+#define ELE_IMEM_STATE_BAD 0xFE
+#define ELE_IMEM_STATE_WORD 0x27
+#define ELE_IMEM_STATE_MASK 0x00ff0000
+
+#define RESERVED_DMA_POOL BIT(1)
+
+struct ele_mu_priv *ele_priv_export;
+
+struct imx_info {
+ bool socdev;
+ /* platform specific flag to enable/disable the ELE True RNG */
+ bool enable_ele_trng;
+ bool reserved_dma_ranges;
+};
+
+static const struct imx_info imx8ulp_info = {
+ .socdev = true,
+ .enable_ele_trng = false,
+ .reserved_dma_ranges = true,
+};
+
+static const struct imx_info imx93_info = {
+ .socdev = false,
+ .enable_ele_trng = true,
+ .reserved_dma_ranges = true,
+};
+
+static const struct of_device_id ele_mu_match[] = {
+ { .compatible = "fsl,imx-ele", .data = (void *)&imx8ulp_info},
+ { .compatible = "fsl,imx93-ele", .data = (void *)&imx93_info},
+ {},
+};
+
+int get_ele_mu_priv(struct ele_mu_priv **export)
+{
+ if (!ele_priv_export)
+ return -EPROBE_DEFER;
+
+ *export = ele_priv_export;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(get_ele_mu_priv);
+
+/*
+ * Callback called by mailbox FW when data are received
+ */
+static void ele_mu_rx_callback(struct mbox_client *c, void *msg)
+{
+ struct device *dev = c->dev;
+ struct ele_mu_priv *priv = dev_get_drvdata(dev);
+ struct ele_mu_device_ctx *dev_ctx;
+ bool is_response = false;
+ int msg_size;
+ struct mu_hdr header;
+
+ dev_dbg(dev, "Message received on mailbox\n");
+
+ /* The function can be called with NULL msg */
+ if (!msg) {
+ dev_err(dev, "Message is invalid\n");
+ return;
+ }
+
+ if (IS_ERR(msg)) {
+ dev_err(dev, "Error during reception of message: %ld\n",
+ PTR_ERR(msg));
+ return;
+ }
+
+ header.tag = ((u8 *)msg)[TAG_OFFSET];
+ header.command = ((u8 *)msg)[CMD_OFFSET];
+ header.size = ((u8 *)msg)[SZ_OFFSET];
+ header.ver = ((u8 *)msg)[VER_OFFSET];
+
+ dev_dbg(dev, "Selecting device\n");
+
+ /* Incoming command: wake up the receiver if any. */
+ if (header.tag == priv->cmd_tag) {
+ dev_dbg(dev, "Selecting cmd receiver\n");
+ dev_ctx = priv->cmd_receiver_dev;
+ } else if (header.tag == priv->rsp_tag) {
+ if (priv->waiting_rsp_dev) {
+ dev_dbg(dev, "Selecting rsp waiter\n");
+ dev_ctx = priv->waiting_rsp_dev;
+ is_response = true;
+ } else {
+ /* Reading the EdgeLock Enclave response
+ * to the command sent by other
+ * linux kernel services.
+ */
+ spin_lock(&priv->lock);
+ priv->rx_msg = *(struct ele_api_msg *)msg;
+ complete(&priv->done);
+ spin_unlock(&priv->lock);
+ //mutex_unlock(&priv->mu_cmd_lock);
+ return;
+ }
+ } else {
+ dev_err(dev, "Failed to select a device for message: %.8x\n",
+ *((u32 *) &header));
+ return;
+ }
+
+ if (!dev_ctx) {
+ dev_err(dev, "No device context selected for message: %.8x\n",
+ *((u32 *)&header));
+ return;
+ }
+ /* Init reception */
+ msg_size = header.size;
+ if (msg_size > MAX_RECV_SIZE) {
+ devctx_err(dev_ctx, "Message is too big (%d > %d)", msg_size,
+ MAX_RECV_SIZE);
+ return;
+ }
+
+ memcpy(dev_ctx->temp_resp, msg, msg_size * WORD_SZ);
+ dev_ctx->temp_resp_size = msg_size;
+
+ /* Allow user to read */
+ dev_ctx->pending_hdr = dev_ctx->temp_resp[0];
+ wake_up_interruptible(&dev_ctx->wq);
+
+ if (is_response) {
+ priv->waiting_rsp_dev = NULL;
+ //mutex_unlock(&priv->mu_cmd_lock);
+ }
+}
+
+static void ele_ping_handler(struct work_struct *work)
+{
+ int ret;
+
+ ret = ele_ping();
+ if (ret)
+ pr_err("ping ele failed, try again!\n");
+
+ /* reschedule the delay work */
+ schedule_delayed_work(to_delayed_work(work), ELE_PING_INTERVAL);
+}
+static DECLARE_DELAYED_WORK(ele_ping_work, ele_ping_handler);
+
+static int imx_soc_device_register(struct platform_device *pdev)
+{
+ struct soc_device_attribute *attr;
+ struct soc_device *dev;
+ struct gen_pool *sram_pool;
+ u32 *get_info_data;
+ phys_addr_t get_info_addr;
+ u32 soc_rev;
+ u32 v[4];
+ int err;
+
+ err = read_common_fuse(OTP_UNIQ_ID, v);
+ if (err)
+ return err;
+
+ sram_pool = of_gen_pool_get(pdev->dev.of_node, "sram-pool", 0);
+ if (!sram_pool) {
+ pr_err("Unable to get sram pool\n");
+ return -EINVAL;
+ }
+
+ get_info_data = (u32 *)gen_pool_alloc(sram_pool, 0x100);
+ if (!get_info_data) {
+ pr_err("Unable to alloc sram from sram pool\n");
+ return -ENOMEM;
+ }
+
+ get_info_addr = gen_pool_virt_to_phys(sram_pool, (ulong)get_info_data);
+
+ attr = kzalloc(sizeof(*attr), GFP_KERNEL);
+ if (!attr)
+ return -ENOMEM;
+
+ err = ele_get_info(get_info_addr, 23 * WORD_SZ);
+ if (err) {
+ attr->revision = kasprintf(GFP_KERNEL, "A0");
+ } else {
+ soc_rev = (get_info_data[1] & 0xffff0000) >> 16;
+ if (soc_rev == 0xA100)
+ attr->revision = kasprintf(GFP_KERNEL, "A1");
+ else
+ attr->revision = kasprintf(GFP_KERNEL, "A0");
+ }
+
+ gen_pool_free(sram_pool, (unsigned long)get_info_data, 0x100);
+
+ err = of_property_read_string(of_root, "model", &attr->machine);
+ if (err) {
+ kfree(attr);
+ return -EINVAL;
+ }
+ attr->family = kasprintf(GFP_KERNEL, "Freescale i.MX");
+
+ attr->serial_number
+ = kasprintf(GFP_KERNEL, "%016llX", (u64)v[3] << 32 | v[0]);
+ attr->soc_id = kasprintf(GFP_KERNEL, "i.MX8ULP");
+
+ dev = soc_device_register(attr);
+ if (IS_ERR(dev)) {
+ kfree(attr->soc_id);
+ kfree(attr->serial_number);
+ kfree(attr->revision);
+ kfree(attr->family);
+ kfree(attr->machine);
+ kfree(attr);
+ return PTR_ERR(dev);
+ }
+
+ return 0;
+}
+
+static int ele_do_start_rng(void)
+{
+ int ret;
+ int count = ELE_GET_TRNG_STATE_RETRY_COUNT;
+
+ ret = ele_get_trng_state();
+ if (ret < 0) {
+ pr_err("Failed to get trng state\n");
+ return ret;
+ } else if (ret != ELE_TRNG_STATE_OK) {
+ /* call start rng */
+ ret = ele_start_rng();
+ if (ret) {
+ pr_err("Failed to start rng\n");
+ return ret;
+ }
+
+ /* poll get trng state API, ELE_GET_TRNG_STATE_RETRY_COUNT times
+ * or while trng state != 0x203
+ */
+ do {
+ msleep(10);
+ ret = ele_get_trng_state();
+ if (ret < 0) {
+ pr_err("Failed to get trng state\n");
+ return ret;
+ }
+ count--;
+ } while ((ret != ELE_TRNG_STATE_OK) && count);
+ if (ret != ELE_TRNG_STATE_OK)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * File operations for user-space
+ */
+
+/* Write a message to the MU. */
+static ssize_t ele_mu_fops_write(struct file *fp, const char __user *buf,
+ size_t size, loff_t *ppos)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ struct ele_mu_priv *ele_mu_priv = dev_ctx->priv;
+ u32 nb_words = 0;
+ struct mu_hdr header;
+ int err;
+
+ devctx_dbg(dev_ctx, "write from buf (%p)%zu, ppos=%lld\n", buf, size,
+ ((ppos) ? *ppos : 0));
+
+ if (down_interruptible(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ if (dev_ctx->status != MU_OPENED) {
+ err = -EINVAL;
+ goto exit;
+ }
+
+ if (size < ELE_MU_HDR_SZ) {
+ devctx_err(dev_ctx, "User buffer too small(%zu < %d)\n",
+ size, ELE_MU_HDR_SZ);
+ err = -ENOSPC;
+ goto exit;
+ }
+
+ if (size > MAX_MESSAGE_SIZE_BYTES) {
+ devctx_err(dev_ctx, "User buffer too big(%zu > %d)\n", size,
+ MAX_MESSAGE_SIZE_BYTES);
+ err = -ENOSPC;
+ goto exit;
+ }
+
+ /* Copy data to buffer */
+ err = (int)copy_from_user(dev_ctx->temp_cmd, buf, size);
+ if (err) {
+ err = -EFAULT;
+ devctx_err(dev_ctx, "Fail copy message from user\n");
+ goto exit;
+ }
+
+ print_hex_dump_debug("from user ", DUMP_PREFIX_OFFSET, 4, 4,
+ dev_ctx->temp_cmd, size, false);
+
+ header = *((struct mu_hdr *) (&dev_ctx->temp_cmd[0]));
+
+ /* Check the message is valid according to tags */
+ if (header.tag == ele_mu_priv->cmd_tag) {
+ /*
+ * unlocked in ele_mu_receive_work_handler when the
+ * response to this command is received.
+ */
+ mutex_lock(&ele_mu_priv->mu_cmd_lock);
+ ele_mu_priv->waiting_rsp_dev = dev_ctx;
+ } else if (header.tag == ele_mu_priv->rsp_tag) {
+ /* Check the device context can send the command */
+ if (dev_ctx != ele_mu_priv->cmd_receiver_dev) {
+ devctx_err(dev_ctx,
+ "Channel not configured to send resp to FW.");
+ err = -EPERM;
+ goto exit;
+ }
+ } else {
+ devctx_err(dev_ctx, "The message does not have a valid TAG\n");
+ err = -EINVAL;
+ goto exit;
+ }
+
+ /*
+ * Check that the size passed as argument matches the size
+ * carried in the message.
+ */
+ nb_words = header.size;
+ if (nb_words << 2 != size) {
+ devctx_err(dev_ctx, "User buffer too small\n");
+ goto exit;
+ }
+
+ mutex_lock(&ele_mu_priv->mu_lock);
+
+ /* Send message */
+ devctx_dbg(dev_ctx, "sending message\n");
+ err = mbox_send_message(ele_mu_priv->tx_chan, dev_ctx->temp_cmd);
+ if (err < 0) {
+ devctx_err(dev_ctx, "Failed to send message\n");
+ goto unlock;
+ }
+
+ err = nb_words * WORD_SZ;
+
+unlock:
+ mutex_unlock(&ele_mu_priv->mu_lock);
+
+exit:
+ up(&dev_ctx->fops_lock);
+ return err;
+}
+
+/*
+ * Read a message from the MU.
+ * Blocking until a message is available.
+ */
+static ssize_t ele_mu_fops_read(struct file *fp, char __user *buf,
+ size_t size, loff_t *ppos)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ struct ele_mu_priv *ele_mu_priv = dev_ctx->priv;
+ u32 data_size = 0, size_to_copy = 0;
+ struct ele_obuf_desc *b_desc;
+ int err;
+ struct mu_hdr header;
+
+ devctx_dbg(dev_ctx, "read to buf %p(%zu), ppos=%lld\n", buf, size,
+ ((ppos) ? *ppos : 0));
+
+ if (down_interruptible(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ if (dev_ctx->status != MU_OPENED) {
+ err = -EINVAL;
+ goto exit;
+ }
+
+ /* Wait until the complete message is received on the MU. */
+ err = wait_event_interruptible(dev_ctx->wq, dev_ctx->pending_hdr != 0);
+ if (err) {
+ devctx_err(dev_ctx, "Err[0x%x]:Interrupted by signal.\n", err);
+ goto exit;
+ }
+
+ devctx_dbg(dev_ctx, "%s %s\n", __func__,
+ "message received, start transmit to user");
+
+ /* Check that the size passed as argument is larger than
+ * the one carried in the message.
+ */
+ data_size = dev_ctx->temp_resp_size * WORD_SZ;
+ size_to_copy = data_size;
+ if (size_to_copy > size) {
+ devctx_dbg(dev_ctx, "User buffer too small (%zu < %d)\n",
+ size, size_to_copy);
+ size_to_copy = size;
+ }
+
+ /* We may need to copy the output data to user before
+ * delivering the completion message.
+ */
+ while (!list_empty(&dev_ctx->pending_out)) {
+ b_desc = list_first_entry_or_null(&dev_ctx->pending_out,
+ struct ele_obuf_desc,
+ link);
+ if (b_desc->out_usr_ptr && b_desc->out_ptr) {
+ devctx_dbg(dev_ctx, "Copy output data to user\n");
+ err = (int)copy_to_user(b_desc->out_usr_ptr,
+ b_desc->out_ptr,
+ b_desc->out_size);
+ if (err) {
+ devctx_err(dev_ctx,
+ "Failure copying output data to user.");
+ err = -EFAULT;
+ goto exit;
+ }
+ }
+ __list_del_entry(&b_desc->link);
+ devm_kfree(dev_ctx->dev, b_desc);
+ }
+
+ header = *((struct mu_hdr *) (&dev_ctx->temp_resp[0]));
+
+ /* Copy data from the buffer */
+ print_hex_dump_debug("to user ", DUMP_PREFIX_OFFSET, 4, 4,
+ dev_ctx->temp_resp, size_to_copy, false);
+ err = (int)copy_to_user(buf, dev_ctx->temp_resp, size_to_copy);
+ if (err) {
+ devctx_err(dev_ctx, "Failed to copy to user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+ err = size_to_copy;
+
+ /* free memory allocated on the shared buffers. */
+ dev_ctx->secure_mem.pos = 0;
+ dev_ctx->non_secure_mem.pos = 0;
+
+ dev_ctx->pending_hdr = 0;
+
+exit:
+ if (header.tag == ele_mu_priv->rsp_tag)
+ mutex_unlock(&ele_mu_priv->mu_cmd_lock);
+ up(&dev_ctx->fops_lock);
+ return err;
+}
+
+/* Give access to EdgeLock Enclave, to the memory we want to share */
+static int ele_mu_setup_ele_mem_access(struct ele_mu_device_ctx *dev_ctx,
+ u64 addr, u32 len)
+{
+ /* Assuming EdgeLock Enclave has access to all the memory regions */
+ int ret = 0;
+
+ if (ret) {
+ devctx_err(dev_ctx, "Fail find memreg\n");
+ goto exit;
+ }
+
+ if (ret) {
+ devctx_err(dev_ctx, "Fail set permission for resource\n");
+ goto exit;
+ }
+
+exit:
+ return ret;
+}
+
+static int ele_mu_ioctl_get_mu_info(struct ele_mu_device_ctx *dev_ctx,
+ unsigned long arg)
+{
+ struct ele_mu_priv *priv = dev_get_drvdata(dev_ctx->dev);
+ struct ele_mu_ioctl_get_mu_info info;
+ int err = -EINVAL;
+
+ info.ele_mu_id = (u8)priv->ele_mu_id;
+ info.interrupt_idx = 0;
+ info.tz = 0;
+ info.did = (u8)priv->ele_mu_did;
+
+ devctx_dbg(dev_ctx,
+ "info [mu_idx: %d, irq_idx: %d, tz: 0x%x, did: 0x%x]\n",
+ info.ele_mu_id, info.interrupt_idx, info.tz, info.did);
+
+ err = (int)copy_to_user((u8 *)arg, &info,
+ sizeof(info));
+ if (err) {
+ devctx_err(dev_ctx, "Failed to copy mu info to user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+exit:
+ return err;
+}
+
+/*
+ * Copy a buffer of daa to/from the user and return the address to use in
+ * messages
+ */
+static int ele_mu_ioctl_setup_iobuf_handler(struct ele_mu_device_ctx *dev_ctx,
+ unsigned long arg)
+{
+ struct ele_obuf_desc *out_buf_desc;
+ struct ele_mu_ioctl_setup_iobuf io = {0};
+ struct ele_shared_mem *shared_mem;
+ int err = -EINVAL;
+ u32 pos;
+
+ err = (int)copy_from_user(&io,
+ (u8 *)arg,
+ sizeof(io));
+ if (err) {
+ devctx_err(dev_ctx, "Failed copy iobuf config from user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+ devctx_dbg(dev_ctx, "io [buf: %p(%d) flag: %x]\n",
+ io.user_buf, io.length, io.flags);
+
+ if (io.length == 0 || !io.user_buf) {
+ /*
+ * Accept NULL pointers since some buffers are optional
+ * in FW commands. In this case we should return 0 as
+ * pointer to be embedded into the message.
+ * Skip all data copy part of code below.
+ */
+ io.ele_addr = 0;
+ goto copy;
+ }
+
+ /* Select the shared memory to be used for this buffer. */
+ if (io.flags & ELE_MU_IO_FLAGS_USE_SEC_MEM) {
+ /* App requires to use secure memory for this buffer.*/
+ devctx_err(dev_ctx, "Failed allocate SEC MEM memory\n");
+ err = -EFAULT;
+ goto exit;
+ } else {
+ /* No specific requirement for this buffer. */
+ shared_mem = &dev_ctx->non_secure_mem;
+ }
+
+ /* Check there is enough space in the shared memory. */
+ if (io.length >= shared_mem->size - shared_mem->pos) {
+ devctx_err(dev_ctx, "Not enough space in shared memory\n");
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ /* Allocate space in shared memory. 8 bytes aligned. */
+ pos = shared_mem->pos;
+ shared_mem->pos += round_up(io.length, 8u);
+ io.ele_addr = (u64)shared_mem->dma_addr + pos;
+
+ if ((io.flags & ELE_MU_IO_FLAGS_USE_SEC_MEM) &&
+ !(io.flags & ELE_MU_IO_FLAGS_USE_SHORT_ADDR)) {
+ /*Add base address to get full address.*/
+ devctx_err(dev_ctx, "Failed allocate SEC MEM memory\n");
+ err = -EFAULT;
+ goto exit;
+ }
+
+ if (io.flags & ELE_MU_IO_FLAGS_IS_INPUT) {
+ /*
+ * buffer is input:
+ * copy data from user space to this allocated buffer.
+ */
+ err = (int)copy_from_user(shared_mem->ptr + pos, io.user_buf,
+ io.length);
+ if (err) {
+ devctx_err(dev_ctx,
+ "Failed copy data to shared memory\n");
+ err = -EFAULT;
+ goto exit;
+ }
+ /* flush this memory "shared_mem->ptr + pos"
+ * with size = io.length
+ */
+ } else {
+ if (io.flags & ELE_MU_IO_FLAGS_IS_IN_OUT) {
+ err = (int)copy_from_user(shared_mem->ptr + pos,
+ io.user_buf,
+ io.length);
+ if (err) {
+ devctx_err(dev_ctx,
+ "Failed copy data to shared-mem.\n");
+ err = -EFAULT;
+ goto exit;
+ }
+ }
+
+ /*
+ * buffer is output:
+ * add an entry in the "pending buffers" list so data
+ * can be copied to user space when receiving FW
+ * response.
+ */
+ out_buf_desc = devm_kmalloc(dev_ctx->dev,
+ sizeof(*out_buf_desc),
+ GFP_KERNEL);
+
+ if (!out_buf_desc) {
+ err = -ENOMEM;
+ devctx_err(dev_ctx,
+ "Failed allocating mem for pending buffer\n"
+ );
+ goto exit;
+ }
+
+ out_buf_desc->out_ptr = shared_mem->ptr + pos;
+ out_buf_desc->out_usr_ptr = io.user_buf;
+ out_buf_desc->out_size = io.length;
+ list_add_tail(&out_buf_desc->link, &dev_ctx->pending_out);
+ }
+
+copy:
+ /* Provide the EdgeLock Enclave address to user space only if success.*/
+ err = (int)copy_to_user((u8 *)arg, &io,
+ sizeof(io));
+ if (err) {
+ devctx_err(dev_ctx, "Failed to copy iobuff setup to user\n");
+ err = -EFAULT;
+ goto exit;
+ }
+exit:
+ return err;
+}
+
+
+
+/* Open a char device. */
+static int ele_mu_fops_open(struct inode *nd, struct file *fp)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ int err;
+
+ /* Avoid race if opened at the same time */
+ if (down_trylock(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ /* Authorize only 1 instance. */
+ if (dev_ctx->status != MU_FREE) {
+ err = -EBUSY;
+ goto exit;
+ }
+
+ /*
+ * Allocate some memory for data exchanges with S40x.
+ * This will be used for data not requiring secure memory.
+ */
+ dev_ctx->non_secure_mem.ptr = dmam_alloc_coherent(dev_ctx->dev,
+ MAX_DATA_SIZE_PER_USER,
+ &dev_ctx->non_secure_mem.dma_addr,
+ GFP_KERNEL);
+ if (!dev_ctx->non_secure_mem.ptr) {
+ err = -ENOMEM;
+ devctx_err(dev_ctx, "Failed to map shared memory with S40x\n");
+ goto exit;
+ }
+
+ err = ele_mu_setup_ele_mem_access(dev_ctx,
+ dev_ctx->non_secure_mem.dma_addr,
+ MAX_DATA_SIZE_PER_USER);
+ if (err) {
+ err = -EPERM;
+ devctx_err(dev_ctx,
+ "Failed to share access to shared memory\n");
+ goto free_coherent;
+ }
+
+ dev_ctx->non_secure_mem.size = MAX_DATA_SIZE_PER_USER;
+ dev_ctx->non_secure_mem.pos = 0;
+ dev_ctx->status = MU_OPENED;
+
+ dev_ctx->pending_hdr = 0;
+
+ goto exit;
+
+free_coherent:
+ dmam_free_coherent(dev_ctx->priv->dev, MAX_DATA_SIZE_PER_USER,
+ dev_ctx->non_secure_mem.ptr,
+ dev_ctx->non_secure_mem.dma_addr);
+
+exit:
+ up(&dev_ctx->fops_lock);
+ return err;
+}
+
+/* Close a char device. */
+static int ele_mu_fops_close(struct inode *nd, struct file *fp)
+{
+ struct ele_mu_device_ctx *dev_ctx = container_of(fp->private_data,
+ struct ele_mu_device_ctx, miscdev);
+ struct ele_mu_priv *priv = dev_ctx->priv;
+ struct ele_obuf_desc *out_buf_desc;
+
+ /* Avoid race if closed at the same time */
+ if (down_trylock(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ /* The device context has not been opened */
+ if (dev_ctx->status != MU_OPENED)
+ goto exit;
+
+ /* check if this device was registered as command receiver. */
+ if (priv->cmd_receiver_dev == dev_ctx)
+ priv->cmd_receiver_dev = NULL;
+
+ /* check if this device was registered as waiting response. */
+ if (priv->waiting_rsp_dev == dev_ctx) {
+ priv->waiting_rsp_dev = NULL;
+ mutex_unlock(&priv->mu_cmd_lock);
+ }
+
+ /* Unmap secure memory shared buffer. */
+ if (dev_ctx->secure_mem.ptr)
+ devm_iounmap(dev_ctx->dev, dev_ctx->secure_mem.ptr);
+
+ dev_ctx->secure_mem.ptr = NULL;
+ dev_ctx->secure_mem.dma_addr = 0;
+ dev_ctx->secure_mem.size = 0;
+ dev_ctx->secure_mem.pos = 0;
+
+ /* Free non-secure shared buffer. */
+ dmam_free_coherent(dev_ctx->priv->dev, MAX_DATA_SIZE_PER_USER,
+ dev_ctx->non_secure_mem.ptr,
+ dev_ctx->non_secure_mem.dma_addr);
+
+ dev_ctx->non_secure_mem.ptr = NULL;
+ dev_ctx->non_secure_mem.dma_addr = 0;
+ dev_ctx->non_secure_mem.size = 0;
+ dev_ctx->non_secure_mem.pos = 0;
+
+ while (!list_empty(&dev_ctx->pending_out)) {
+ out_buf_desc = list_first_entry_or_null(&dev_ctx->pending_out,
+ struct ele_obuf_desc,
+ link);
+ __list_del_entry(&out_buf_desc->link);
+ devm_kfree(dev_ctx->dev, out_buf_desc);
+ }
+
+ dev_ctx->status = MU_FREE;
+
+exit:
+ up(&dev_ctx->fops_lock);
+ return 0;
+}
+
+/* IOCTL entry point of a char device */
+static long ele_mu_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+ struct ele_mu_device_ctx *dev_ctx
+ = container_of(fp->private_data,
+ struct ele_mu_device_ctx,
+ miscdev);
+ struct ele_mu_priv *ele_mu_priv = dev_ctx->priv;
+ int err = -EINVAL;
+
+ /* Prevent race during change of device context */
+ if (down_interruptible(&dev_ctx->fops_lock))
+ return -EBUSY;
+
+ switch (cmd) {
+ case ELE_MU_IOCTL_ENABLE_CMD_RCV:
+ if (!ele_mu_priv->cmd_receiver_dev) {
+ ele_mu_priv->cmd_receiver_dev = dev_ctx;
+ err = 0;
+ };
+ break;
+ case ELE_MU_IOCTL_GET_MU_INFO:
+ err = ele_mu_ioctl_get_mu_info(dev_ctx, arg);
+ break;
+ case ELE_MU_IOCTL_SHARED_BUF_CFG:
+ devctx_err(dev_ctx,
+ "ELE_MU_IOCTL_SHARED_BUF_CFG not supported [0x%x].\n",
+ err);
+ break;
+ case ELE_MU_IOCTL_SETUP_IOBUF:
+ err = ele_mu_ioctl_setup_iobuf_handler(dev_ctx, arg);
+ break;
+ case ELE_MU_IOCTL_SIGNED_MESSAGE:
+ devctx_err(dev_ctx,
+ "ELE_MU_IOCTL_SIGNED_MESSAGE not supported [0x%x].\n",
+ err);
+ break;
+ default:
+ err = -EINVAL;
+ devctx_dbg(dev_ctx, "IOCTL %.8x not supported\n", cmd);
+ }
+
+ up(&dev_ctx->fops_lock);
+ return (long)err;
+}
+
+/* Char driver setup */
+static const struct file_operations ele_mu_fops = {
+ .open = ele_mu_fops_open,
+ .owner = THIS_MODULE,
+ .release = ele_mu_fops_close,
+ .unlocked_ioctl = ele_mu_ioctl,
+ .read = ele_mu_fops_read,
+ .write = ele_mu_fops_write,
+};
+
+/* interface for managed res to free a mailbox channel */
+static void if_mbox_free_channel(void *mbox_chan)
+{
+ mbox_free_channel(mbox_chan);
+}
+
+/* interface for managed res to unregister a char device */
+static void if_misc_deregister(void *miscdevice)
+{
+ misc_deregister(miscdevice);
+}
+
+static int ele_mu_request_channel(struct device *dev,
+ struct mbox_chan **chan,
+ struct mbox_client *cl,
+ const char *name)
+{
+ struct mbox_chan *t_chan;
+ int ret = 0;
+
+ t_chan = mbox_request_channel_byname(cl, name);
+ if (IS_ERR(t_chan)) {
+ ret = PTR_ERR(t_chan);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev,
+ "Failed to request chan %s ret %d\n", name,
+ ret);
+ goto exit;
+ }
+
+ ret = devm_add_action(dev, if_mbox_free_channel, t_chan);
+ if (ret) {
+ dev_err(dev, "failed to add devm removal of mbox %s\n", name);
+ goto exit;
+ }
+
+ *chan = t_chan;
+
+exit:
+ return ret;
+}
+
+static int ele_mu_probe(struct platform_device *pdev)
+{
+ struct ele_mu_device_ctx *dev_ctx;
+ struct device *dev = &pdev->dev;
+ struct ele_mu_priv *priv;
+ struct device_node *np;
+ const struct of_device_id *of_id = of_match_device(ele_mu_match, dev);
+ struct imx_info *info = (of_id != NULL) ? (struct imx_info *)of_id->data
+ : NULL;
+ int max_nb_users = 0;
+ char *devname;
+ int ret;
+ int i;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ dev_err(dev, "Fail allocate mem for private data\n");
+ goto exit;
+ }
+ priv->dev = dev;
+ dev_set_drvdata(dev, priv);
+
+ /*
+ * Get the address of MU to be used for communication with the SCU
+ */
+ np = pdev->dev.of_node;
+ if (!np) {
+ dev_err(dev, "Cannot find MU User entry in device tree\n");
+ ret = -EOPNOTSUPP;
+ goto exit;
+ }
+
+ /* Initialize the mutex. */
+ mutex_init(&priv->mu_cmd_lock);
+ mutex_init(&priv->mu_lock);
+
+ /* TBD */
+ priv->cmd_receiver_dev = NULL;
+ priv->waiting_rsp_dev = NULL;
+
+ ret = of_property_read_u32(np, "fsl,ele_mu_did", &priv->ele_mu_did);
+ if (ret) {
+ ret = -EINVAL;
+ dev_err(dev, "%s: Not able to read ele_mu_did", __func__);
+ goto exit;
+ }
+
+ ret = of_property_read_u32(np, "fsl,ele_mu_id", &priv->ele_mu_id);
+ if (ret) {
+ ret = -EINVAL;
+ dev_err(dev, "%s: Not able to read ele_mu_id", __func__);
+ goto exit;
+ }
+
+ ret = of_property_read_u32(np, "fsl,ele_mu_max_users", &max_nb_users);
+ if (ret) {
+ dev_warn(dev, "%s: Not able to read mu_max_user", __func__);
+ max_nb_users = S4_MUAP_DEFAULT_MAX_USERS;
+ }
+
+ ret = of_property_read_u8(np, "fsl,cmd_tag", &priv->cmd_tag);
+ if (ret) {
+ dev_warn(dev, "%s: Not able to read cmd_tag", __func__);
+ priv->cmd_tag = DEFAULT_MESSAGING_TAG_COMMAND;
+ }
+
+ ret = of_property_read_u8(np, "fsl,rsp_tag", &priv->rsp_tag);
+ if (ret) {
+ dev_warn(dev, "%s: Not able to read rsp_tag", __func__);
+ priv->rsp_tag = DEFAULT_MESSAGING_TAG_RESPONSE;
+ }
+
+ /* Mailbox client configuration */
+ priv->ele_mb_cl.dev = dev;
+ priv->ele_mb_cl.tx_block = false;
+ priv->ele_mb_cl.knows_txdone = true;
+ priv->ele_mb_cl.rx_callback = ele_mu_rx_callback;
+
+ ret = ele_mu_request_channel(dev, &priv->tx_chan,
+ &priv->ele_mb_cl, "tx");
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request tx channel\n");
+
+ goto exit;
+ }
+
+ ret = ele_mu_request_channel(dev, &priv->rx_chan,
+ &priv->ele_mb_cl, "rx");
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request rx channel\n");
+
+ goto exit;
+ }
+
+ priv->max_dev_ctx = max_nb_users;
+ priv->ctxs = devm_kzalloc(dev, sizeof(dev_ctx) * max_nb_users,
+ GFP_KERNEL);
+
+ /* Create users */
+ for (i = 0; i < max_nb_users; i++) {
+ dev_ctx = devm_kzalloc(dev, sizeof(*dev_ctx), GFP_KERNEL);
+ if (!dev_ctx) {
+ ret = -ENOMEM;
+ dev_err(dev,
+ "Fail to allocate memory for device context\n");
+ goto exit;
+ }
+
+ dev_ctx->dev = dev;
+ dev_ctx->status = MU_FREE;
+ dev_ctx->priv = priv;
+
+ priv->ctxs[i] = dev_ctx;
+
+ /* Default value invalid for an header. */
+ init_waitqueue_head(&dev_ctx->wq);
+
+ INIT_LIST_HEAD(&dev_ctx->pending_out);
+ sema_init(&dev_ctx->fops_lock, 1);
+
+ devname = devm_kasprintf(dev, GFP_KERNEL, "ele_mu%d_ch%d",
+ priv->ele_mu_id, i);
+ if (!devname) {
+ ret = -ENOMEM;
+ dev_err(dev,
+ "Fail to allocate memory for misc dev name\n");
+ goto exit;
+ }
+
+ dev_ctx->miscdev.name = devname;
+ dev_ctx->miscdev.minor = MISC_DYNAMIC_MINOR;
+ dev_ctx->miscdev.fops = &ele_mu_fops;
+ dev_ctx->miscdev.parent = dev;
+ ret = misc_register(&dev_ctx->miscdev);
+ if (ret) {
+ dev_err(dev, "failed to register misc device %d\n",
+ ret);
+ goto exit;
+ }
+
+ ret = devm_add_action(dev, if_misc_deregister,
+ &dev_ctx->miscdev);
+ if (ret) {
+ dev_err(dev,
+ "failed[%d] to add action to the misc-dev\n",
+ ret);
+ goto exit;
+ }
+ }
+
+ init_completion(&priv->done);
+ spin_lock_init(&priv->lock);
+
+ ele_priv_export = priv;
+
+ if (info && info->reserved_dma_ranges) {
+ ret = of_reserved_mem_device_init(dev);
+ if (ret) {
+ dev_err(dev,
+ "failed to init reserved memory region %d\n",
+ ret);
+ priv->flags &= (~RESERVED_DMA_POOL);
+ goto exit;
+ }
+ priv->flags |= RESERVED_DMA_POOL;
+ }
+
+ if (info && info->socdev) {
+ ret = imx_soc_device_register(pdev);
+ if (ret) {
+ dev_err(dev,
+ "failed[%d] to register SoC device\n", ret);
+ goto exit;
+ }
+
+ /* allocate buffer where ELE store encrypted IMEM */
+ priv->imem.buf = dmam_alloc_coherent(dev, ELE_IMEM_SIZE,
+ &priv->imem.phyaddr,
+ GFP_KERNEL);
+ if (!priv->imem.buf) {
+ dev_err(dev,
+ "Failed dmam-alloc to store encrypted IMEM.\n");
+ ret = -ENOMEM;
+ goto exit;
+ }
+ }
+
+ /* start ele rng */
+ ret = ele_do_start_rng();
+ if (ret)
+ dev_err(dev, "Failed to start ele rng\n");
+
+ if (!ret && info && info->enable_ele_trng) {
+ ret = ele_trng_init(dev);
+ if (ret)
+ dev_err(dev, "Failed to init ele-trng\n");
+ }
+
+ /*
+ * A ELE ping request must be send at least once every day(24 hours),
+ * so setup a delay work with 1 hour interval
+ * to ping ELE periodically.
+ */
+ schedule_delayed_work(&ele_ping_work, ELE_PING_INTERVAL);
+
+ dev_set_drvdata(dev, priv);
+ return devm_of_platform_populate(dev);
+
+exit:
+ /* if execution control reaches here, ele-mu probe fail.
+ * hence doing the cleanup
+ */
+ if (priv->flags & RESERVED_DMA_POOL) {
+ of_reserved_mem_device_release(dev);
+ priv->flags &= (~RESERVED_DMA_POOL);
+ }
+ return ret;
+}
+
+static int ele_mu_remove(struct platform_device *pdev)
+{
+ struct ele_mu_priv *priv;
+
+ cancel_delayed_work_sync(&ele_ping_work);
+ priv = dev_get_drvdata(&pdev->dev);
+ mbox_free_channel(priv->tx_chan);
+ mbox_free_channel(priv->rx_chan);
+
+ /* free the buffer in ele-mu remove, previously allocated
+ * in ele-mu probe to store encrypted IMEM
+ */
+ if (priv->imem.buf) {
+ dmam_free_coherent(&pdev->dev,
+ ELE_IMEM_SIZE,
+ priv->imem.buf,
+ priv->imem.phyaddr);
+ priv->imem.buf = NULL;
+ }
+
+ if (priv->flags & RESERVED_DMA_POOL) {
+ of_reserved_mem_device_release(&pdev->dev);
+ priv->flags &= (~RESERVED_DMA_POOL);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ele_mu_suspend(struct device *dev)
+{
+ struct ele_mu_priv *priv = dev_get_drvdata(dev);
+ const struct of_device_id *of_id = of_match_device(ele_mu_match, dev);
+ struct imx_info *info = (of_id != NULL) ? (struct imx_info *)of_id->data
+ : NULL;
+
+ if (info && info->socdev) {
+ int ret;
+
+ /* EXPORT command will save encrypted IMEM to given address,
+ * so later in resume, IMEM can be restored from the given
+ * address.
+ *
+ * Size must be at least 64 kB.
+ */
+ ret = ele_service_swap(priv->imem.phyaddr,
+ ELE_IMEM_SIZE,
+ ELE_IMEM_EXPORT);
+ if (ret < 0)
+ dev_err(dev, "Failed to export IMEM\n");
+ else {
+ priv->imem.size = ret;
+ dev_info(dev,
+ "Exported %d bytes of encrypted IMEM\n",
+ ret);
+ }
+ }
+
+ return 0;
+}
+
+static int ele_mu_resume(struct device *dev)
+{
+ struct ele_mu_priv *priv = dev_get_drvdata(dev);
+ int i;
+ const struct of_device_id *of_id = of_match_device(ele_mu_match, dev);
+ struct imx_info *info = (of_id != NULL) ? (struct imx_info *)of_id->data
+ : NULL;
+
+ for (i = 0; i < priv->max_dev_ctx; i++)
+ wake_up_interruptible(&priv->ctxs[i]->wq);
+
+ if (info && info->socdev) {
+ struct gen_pool *sram_pool;
+ u32 *get_info_buf;
+ phys_addr_t get_info_phyaddr;
+ u32 imem_state;
+ int ret;
+
+ ret = ele_do_start_rng();
+ if (ret)
+ return ret;
+
+ /* allocate buffer to get info from ELE */
+ sram_pool = of_gen_pool_get(dev->of_node, "sram-pool", 0);
+ if (!sram_pool) {
+ dev_err(dev, "Unable to get sram pool\n");
+ return -EINVAL;
+ }
+
+ get_info_buf = (u32 *)gen_pool_alloc(sram_pool,
+ ELE_GET_INFO_BUFF_SZ);
+ if (!get_info_buf) {
+ dev_err(dev, "Unable to alloc sram from sram pool\n");
+ return -ENOMEM;
+ }
+ get_info_phyaddr = gen_pool_virt_to_phys(sram_pool,
+ (ulong)get_info_buf);
+
+ /* get info from ELE */
+ ret = ele_get_info(get_info_phyaddr, ELE_GET_INFO_READ_SZ);
+ if (ret) {
+ dev_err(dev, "Failed to get info from ELE.\n");
+ goto exit;
+ }
+
+ /* Get IMEM state, if 0xFE then import IMEM */
+ imem_state = (get_info_buf[ELE_IMEM_STATE_WORD]
+ & ELE_IMEM_STATE_MASK) >> 16;
+ if (imem_state == ELE_IMEM_STATE_BAD) {
+ /* IMPORT command will restore IMEM from the given
+ * address, here size is the actual size returned by ELE
+ * during the export operation
+ */
+ ret = ele_service_swap(priv->imem.phyaddr,
+ priv->imem.size,
+ ELE_IMEM_IMPORT);
+ if (ret) {
+ dev_err(dev, "Failed to import IMEM\n");
+ goto exit;
+ }
+ } else
+ goto exit;
+
+ /* After importing IMEM, check if IMEM state is equal to 0xCA
+ * to ensure IMEM is fully loaded and
+ * ELE functionality can be used.
+ */
+ ret = ele_get_info(get_info_phyaddr, ELE_GET_INFO_READ_SZ);
+ if (ret) {
+ dev_err(dev, "Failed to get info from ELE.\n");
+ goto exit;
+ }
+
+ imem_state = (get_info_buf[ELE_IMEM_STATE_WORD]
+ & ELE_IMEM_STATE_MASK) >> 16;
+ if (imem_state == ELE_IMEM_STATE_OK)
+ dev_info(dev, "Successfully restored IMEM\n");
+ else
+ dev_err(dev, "Failed to restore IMEM\n");
+
+exit:
+ gen_pool_free(sram_pool, (ulong)get_info_buf, ELE_GET_INFO_BUFF_SZ);
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops ele_mu_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(ele_mu_suspend, ele_mu_resume)
+};
+
+static struct platform_driver ele_mu_driver = {
+ .driver = {
+ .name = "fsl-ele-mu",
+ .of_match_table = ele_mu_match,
+ .pm = &ele_mu_pm,
+ },
+ .probe = ele_mu_probe,
+ .remove = ele_mu_remove,
+};
+MODULE_DEVICE_TABLE(of, ele_mu_match);
+
+module_platform_driver(ele_mu_driver);
+
+MODULE_AUTHOR("Pankaj Gupta <[email protected]>");
+MODULE_DESCRIPTION("iMX Secure Enclave MU Driver.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/firmware/imx/ele_mu.h b/drivers/firmware/imx/ele_mu.h
new file mode 100644
index 000000000000..371a3c635f50
--- /dev/null
+++ b/drivers/firmware/imx/ele_mu.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021-2022 NXP
+ */
+
+#ifndef ELE_MU_H
+#define ELE_MU_H
+
+#include <linux/miscdevice.h>
+#include <linux/semaphore.h>
+#include <linux/mailbox_client.h>
+
+/* macro to log operation of a misc device */
+#define miscdev_dbg(p_miscdev, fmt, va_args...) \
+ ({ \
+ struct miscdevice *_p_miscdev = p_miscdev; \
+ dev_dbg((_p_miscdev)->parent, "%s: " fmt, (_p_miscdev)->name, \
+ ##va_args); \
+ })
+
+#define miscdev_info(p_miscdev, fmt, va_args...) \
+ ({ \
+ struct miscdevice *_p_miscdev = p_miscdev; \
+ dev_info((_p_miscdev)->parent, "%s: " fmt, (_p_miscdev)->name, \
+ ##va_args); \
+ })
+
+#define miscdev_err(p_miscdev, fmt, va_args...) \
+ ({ \
+ struct miscdevice *_p_miscdev = p_miscdev; \
+ dev_err((_p_miscdev)->parent, "%s: " fmt, (_p_miscdev)->name, \
+ ##va_args); \
+ })
+/* macro to log operation of a device context */
+#define devctx_dbg(p_devctx, fmt, va_args...) \
+ miscdev_dbg(&((p_devctx)->miscdev), fmt, ##va_args)
+#define devctx_info(p_devctx, fmt, va_args...) \
+ miscdev_info(&((p_devctx)->miscdev), fmt, ##va_args)
+#define devctx_err(p_devctx, fmt, va_args...) \
+ miscdev_err((&(p_devctx)->miscdev), fmt, ##va_args)
+
+#define MSG_TAG(x) (((x) & 0xff000000) >> 24)
+#define MSG_COMMAND(x) (((x) & 0x00ff0000) >> 16)
+#define MSG_SIZE(x) (((x) & 0x0000ff00) >> 8)
+#define MSG_VER(x) ((x) & 0x000000ff)
+#define RES_STATUS(x) ((x) & 0x000000ff)
+#define MAX_DATA_SIZE_PER_USER (65 * 1024)
+#define S4_DEFAULT_MUAP_INDEX (2)
+#define S4_MUAP_DEFAULT_MAX_USERS (4)
+
+#define DEFAULT_MESSAGING_TAG_COMMAND (0x17u)
+#define DEFAULT_MESSAGING_TAG_RESPONSE (0xe1u)
+
+//#define ELE_MU_IO_FLAGS_IS_INPUT (0x01u)
+//#define ELE_MU_IO_FLAGS_IS_OUTPUT (0x02u)
+//#define ELE_MU_IO_FLAGS_IS_IN_OUT (0x08u)
+
+#define ELE_MU_IO_FLAGS_USE_SEC_MEM (0x02u)
+#define ELE_MU_IO_FLAGS_USE_SHORT_ADDR (0x04u)
+
+struct ele_imem_buf {
+ u8 *buf;
+ phys_addr_t phyaddr;
+ u32 size;
+};
+
+struct ele_obuf_desc {
+ u8 *out_ptr;
+ u8 *out_usr_ptr;
+ u32 out_size;
+ struct list_head link;
+};
+
+/* Status of a char device */
+enum mu_device_status_t {
+ MU_FREE,
+ MU_OPENED
+};
+
+struct ele_shared_mem {
+ dma_addr_t dma_addr;
+ u32 size;
+ u32 pos;
+ u8 *ptr;
+};
+
+/* Private struct for each char device instance. */
+struct ele_mu_device_ctx {
+ struct device *dev;
+ struct ele_mu_priv *priv;
+ struct miscdevice miscdev;
+
+ enum mu_device_status_t status;
+ wait_queue_head_t wq;
+ struct semaphore fops_lock;
+
+ u32 pending_hdr;
+ struct list_head pending_out;
+
+ struct ele_shared_mem secure_mem;
+ struct ele_shared_mem non_secure_mem;
+
+ u32 temp_cmd[MAX_MESSAGE_SIZE];
+ u32 temp_resp[MAX_RECV_SIZE];
+ u32 temp_resp_size;
+ struct notifier_block ele_notify;
+};
+
+/* Header of the messages exchange with the EdgeLock Enclave */
+struct mu_hdr {
+ u8 ver;
+ u8 size;
+ u8 command;
+ u8 tag;
+} __packed;
+
+#define ELE_MU_HDR_SZ 4
+#define TAG_OFFSET (ELE_MU_HDR_SZ - 1)
+#define CMD_OFFSET (ELE_MU_HDR_SZ - 2)
+#define SZ_OFFSET (ELE_MU_HDR_SZ - 3)
+#define VER_OFFSET (ELE_MU_HDR_SZ - 4)
+
+struct ele_api_msg {
+ u32 header; /* u8 Tag; u8 Command; u8 Size; u8 Ver; */
+ u32 data[ELE_MSG_DATA_NUM];
+};
+
+struct ele_mu_priv {
+ struct ele_mu_device_ctx *cmd_receiver_dev;
+ struct ele_mu_device_ctx *waiting_rsp_dev;
+ /*
+ * prevent parallel access to the MU registers
+ * e.g. a user trying to send a command while the other one is
+ * sending a response.
+ */
+ struct mutex mu_lock;
+ /*
+ * prevent a command to be sent on the MU while another one is still
+ * processing. (response to a command is allowed)
+ */
+ struct mutex mu_cmd_lock;
+ struct device *dev;
+ u32 ele_mu_did;
+ u32 ele_mu_id;
+ u8 cmd_tag;
+ u8 rsp_tag;
+
+ struct mbox_client ele_mb_cl;
+ struct mbox_chan *tx_chan, *rx_chan;
+ struct ele_api_msg tx_msg, rx_msg;
+ struct completion done;
+ spinlock_t lock;
+ /* Flag to retain the state of initialization done at
+ * the time of ele-mu probe.
+ */
+ int flags;
+ int max_dev_ctx;
+ struct ele_mu_device_ctx **ctxs;
+ struct ele_imem_buf imem;
+};
+
+int get_ele_mu_priv(struct ele_mu_priv **export);
+
+int imx_ele_msg_send_rcv(struct ele_mu_priv *priv);
+#ifdef CONFIG_IMX_ELE_TRNG
+int ele_trng_init(struct device *dev);
+#else
+static inline int ele_trng_init(struct device *dev)
+{
+ return 0;
+}
+#endif
+
+#endif
diff --git a/include/linux/firmware/imx/ele_base_msg.h b/include/linux/firmware/imx/ele_base_msg.h
new file mode 100644
index 000000000000..ec9b9df49889
--- /dev/null
+++ b/include/linux/firmware/imx/ele_base_msg.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ *
+ * Header file for the ELE Base API(s).
+ */
+
+#ifndef ELE_BASE_MSG_H
+#define ELE_BASE_MSG_H
+
+#include <linux/types.h>
+
+#define WORD_SZ 4
+#define MAX_RECV_SIZE 31
+#define MAX_RECV_SIZE_BYTES (MAX_RECV_SIZE * WORD_SZ)
+#define MAX_MESSAGE_SIZE 31
+#define MAX_MESSAGE_SIZE_BYTES (MAX_MESSAGE_SIZE * WORD_SZ)
+
+#define MESSAGING_VERSION_7 0x7
+#define ELE_NONE_VAL 0x0
+
+#define ELE_PING_REQ 0x1
+#define ELE_PING_REQ_MSG_SZ 0x02
+
+#define ELE_OEM_CNTN_AUTH_REQ 0x87
+#define ELE_VERIFY_IMAGE_REQ 0x88
+#define ELE_RELEASE_CONTAINER_REQ 0x89
+
+#define ELE_READ_FUSE_REQ 0x97
+#define ELE_READ_FUSE_RSP_MSG_SZ 0x07
+#define ELE_READ_FUSE_REQ_MSG_SZ 0x03
+
+#define OTP_UNIQ_ID 0x01
+#define OTFAD_CONFIG 0x2
+
+#define ELE_GET_INFO_REQ 0xDA
+#define ELE_GET_INFO_REQ_MSG_SZ 0x02
+
+#define ELE_SERVICE_SWAP_REQ 0xDF
+#define ELE_SERVICE_SWAP_REQ_MSG_SZ 0x03
+
+#define ELE_START_RNG_REQ 0xA3
+#define ELE_START_RNG_REQ_MSG_SZ 0x02
+
+#define ELE_GET_TRNG_STATE_REQ 0xA4
+#define ELE_GET_TRNG_STATE_REQ_MSG_SZ 0x03
+
+#define ELE_GET_RANDOM_REQ 0xCD
+#define CSAL_TRNG_STATE_MASK 0x0000ffff
+
+#define ELE_BASE_API_VERSION 0x6
+#define ELE_SUCCESS_IND 0xD6
+#define ELE_FAILURE_IND 0x29
+
+#define ELE_MSG_DATA_NUM 10
+
+#define ELE_IMEM_EXPORT 0x1
+#define ELE_IMEM_IMPORT 0x2
+
+int read_common_fuse(uint16_t fuse_index, u32 *value);
+int ele_ping(void);
+int ele_get_info(phys_addr_t addr, u32 data_size);
+int ele_service_swap(phys_addr_t addr, u32 addr_size, u16 flag);
+int ele_start_rng(void);
+int ele_get_trng_state(void);
+
+#endif
diff --git a/include/linux/firmware/imx/ele_mu_ioctl.h b/include/linux/firmware/imx/ele_mu_ioctl.h
new file mode 100644
index 000000000000..3ad93ded23ed
--- /dev/null
+++ b/include/linux/firmware/imx/ele_mu_ioctl.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause*/
+/*
+ * Copyright 2019-2022 NXP
+ */
+
+#ifndef ELE_MU_IOCTL_H
+#define ELE_MU_IOCTL_H
+
+/* IOCTL definitions. */
+
+struct ele_mu_ioctl_setup_iobuf {
+ u8 *user_buf;
+ u32 length;
+ u32 flags;
+ u64 ele_addr;
+};
+
+struct ele_mu_ioctl_shared_mem_cfg {
+ u32 base_offset;
+ u32 size;
+};
+
+struct ele_mu_ioctl_get_mu_info {
+ u8 ele_mu_id;
+ u8 interrupt_idx;
+ u8 tz;
+ u8 did;
+};
+
+struct ele_mu_ioctl_signed_message {
+ u8 *message;
+ u32 msg_size;
+ u32 error_code;
+};
+
+#define ELE_MU_IO_FLAGS_IS_OUTPUT (0x00u)
+#define ELE_MU_IO_FLAGS_IS_INPUT (0x01u)
+#define ELE_MU_IO_FLAGS_USE_SEC_MEM (0x02u)
+#define ELE_MU_IO_FLAGS_USE_SHORT_ADDR (0x04u)
+#define ELE_MU_IO_FLAGS_IS_IN_OUT (0x08u)
+
+#define ELE_MU_IOCTL 0x0A /* like MISC_MAJOR. */
+#define ELE_MU_IOCTL_ENABLE_CMD_RCV _IO(ELE_MU_IOCTL, 0x01)
+#define ELE_MU_IOCTL_SHARED_BUF_CFG _IOW(ELE_MU_IOCTL, 0x02, \
+ struct ele_mu_ioctl_shared_mem_cfg)
+#define ELE_MU_IOCTL_SETUP_IOBUF _IOWR(ELE_MU_IOCTL, 0x03, \
+ struct ele_mu_ioctl_setup_iobuf)
+#define ELE_MU_IOCTL_GET_MU_INFO _IOR(ELE_MU_IOCTL, 0x04, \
+ struct ele_mu_ioctl_get_mu_info)
+#define ELE_MU_IOCTL_SIGNED_MESSAGE _IOWR(ELE_MU_IOCTL, 0x05, \
+ struct ele_mu_ioctl_signed_message)
+#endif
--
2.34.1
MAINTAINERS: Added maintainer details for ele-mu driver.
Signed-off-by: Pankaj Gupta <[email protected]>
---
MAINTAINERS | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0e64787aace8..59201de85009 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8103,6 +8103,13 @@ S: Maintained
F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt
F: drivers/crypto/caam/
+NXP Edgelock Enclave MU DRIVER
+M: Pankaj Gupta <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
+F: drivers/firmware/imx/
+
FREESCALE COLDFIRE M5441X MMC DRIVER
M: Angelo Dureghello <[email protected]>
L: [email protected]
--
2.34.1
On 19/04/2023 19:55, Pankaj Gupta wrote:
> Documentation update with addition of new device tree
> for NXP ele-mu (Edgelock Enclave Message Unit), driver.
Your patchset is sent with wrong clock. Fix your system because now it
goes before all other patchsets...
Use subject prefixes matching the subsystem (which you can get for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching).
Subject: drop second/last, redundant "bindings". The "dt-bindings"
prefix is already stating that these are bindings.
>
> Signed-off-by: Pankaj Gupta <[email protected]>
> ---
> .../bindings/arm/freescale/fsl,ele_mu.yaml | 139 ++++++++++++++++++
> 1 file changed, 139 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
> new file mode 100644
> index 000000000000..8c4cc32f62ab
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
Underscores are not allowed.
> @@ -0,0 +1,139 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/freescale/fsl,ele_mu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP i.MX EdgeLock Enclave MUAP driver
Drop driver.
> +
> +maintainers:
> + - Pankaj Gupta <[email protected]>
> +
> +description: |
> +
Drop stray blank line
> + NXP i.MX EdgeLock Enclave Message Unit Driver.
Drop driver and rephrase it to describe hardware.
> + The Messaging Unit module enables two processing elements within the SoC to
> + communicate and coordinate by passing messages (e.g., data, status and control)
> + through its interfaces.
> +
> + The NXP i.MX EdgeLock Enclave Message Unit (ELE-MUAP) is specifically targeted
> + for use between application core and Edgelocke Enclave. It allows to send
> + messages to the EL Enclave using a shared mailbox.
> +
> + The messages must follow the protocol defined.
> +
> + Non-Secure + Secure
> + |
> + |
> + +---------+ +-------------+ |
> + | ele_mu.c+<---->+imx-mailbox.c| |
> + | | | mailbox.c +<-->+------+ +------+
> + +---+-----+ +-------------+ | MU X +<-->+ ELE |
> + | +------+ +------+
> + +----------------+ |
> + | | |
> + v v |
> + logical logical |
> + receiver waiter |
> + + + |
> + | | |
> + | | |
> + | +----+------+ |
> + | | | |
> + | | | |
> + device_ctx device_ctx device_ctx |
> + |
> + User 0 User 1 User Y |
> + +------+ +------+ +------+ |
> + |misc.c| |misc.c| |misc.c| |
> + kernel space +------+ +------+ +------+ |
> + |
> + +------------------------------------------------------ |
> + | | | |
> + userspace /dev/ele_muXch0 | | |
> + /dev/ele_muXch1 | |
> + /dev/ele_muXchY |
> + |
> +
> + When a user sends a command to the ELE, it registers its device_ctx as
> + waiter of a response from ELE.
> +
> + A user can be registered as receiver of command from the ELE.
> + Create char devices in /dev as channels of the form /dev/ele_muXchY with X
> + the id of the driver and Y for each users. It allows to send and receive
> + messages to the NXP EdgeLock Enclave IP on NXP SoC, where current possible
> + value, i.e., supported SoC(s) are imx8ulp, imx93.
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx-ele
> + - fsl,imx93-ele
> +
> + mboxes:
> + description:
> + List of <&phandle type channel> - 4 channels for TX, 4 channels for RX,
> + 1 channel for TXDB
> + maxItems: 9
> +
> + mbox-names:
> + items:
> + - const: tx
> + - const: rx
This does not make sense. You have 9 items, not two. Unless you want
some customization.
> +
> + fsl,ele_mu_did:
Underscores are not allowed.
> + description:
> + Owner of message-unit, is identified via Domain ID or did.
> + allOf:
That's not how they this is written. Drop allOf. Please start from
example-schema.
Anyway, half of the properties here do not look like hardware
properties. You need to explain why these are board specific.
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +
> + fsl,ele_mu_id:
> + description:
> + Identifier to the message-unit among the multiple message-unit that exists on SoC.
> + It is used to create the channels, default to 2
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [0, 1, 2, 3]
> +
> + fsl,ele_max_users:
> + description:
> + Number of misclleneous devices to be created, default to 4
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint32
> + - enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
> +
> + fsl,cmd_tag:
> + description:
> + Tag in message header for commands on this MU, default to 0x17
Don't repeat constraints in free form text. Use default:
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint8
> + - enum: [0x17, 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e]
> +
> + fsl,rsp_tag:
> + description:
> + Tag in message header for responses on this MU, default to 0xe1
> + allOf:
> + - $ref: /schemas/types.yaml#/definitions/uint8
> + - enum: [0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8]
> +
> +required:
> + - compatible
> + - mboxes
> + - mbox-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + ele_mu: ele_mu {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Also, underscores are not allowed iin node names.
> + compatible = "fsl,imx93-ele";
> + mbox-names = "tx", "rx";
> + mboxes = <&s4muap 2 0
> + &s4muap 3 0>;
Fix indentation and number of items. These should be separate phandles,
not one phandle.
> +
> + fsl,ele_mu_id = <1>;
> + fsl,ele_max_users = <4>;
> + fsl,cmd_tag = /bits/ 8 <0x17>;
> + fsl,rsp_tag = /bits/ 8 <0xe1>;
> + };
Best regards,
Krzysztof
On 19/04/2023 19:55, Pankaj Gupta wrote:
> v2 Changes:
>
> - Fixed Kernel Test Bot issues.
> - Removed ".../devicetree/bindings/mailbox/fsl,muap.txt"
Drop some weird *** from subject. There is no reason to make it extra,
extra bold font.
Best regards,
Krzysztof
On 19/04/2023 19:55, Pankaj Gupta wrote:
> MAINTAINERS: Added maintainer details for ele-mu driver.
>
> Signed-off-by: Pankaj Gupta <[email protected]>
> ---
> MAINTAINERS | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0e64787aace8..59201de85009 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8103,6 +8103,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/crypto/fsl-sec4.txt
> F: drivers/crypto/caam/
>
> +NXP Edgelock Enclave MU DRIVER
Fix the order. Open the file, read the beginning about ordering.
Best regards,
Krzysztof
On 19/04/2023 19:55, Pankaj Gupta wrote:
> adde support for ele-mu for imx93-11x11-evk.
Typo, missing capital letter.
>
> Signed-off-by: Pankaj Gupta <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/imx93.dtsi | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index 41efd97dd6d6..ffb7cb8ed228 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -1,6 +1,6 @@
> // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> /*
> - * Copyright 2022 NXP
> + * Copyright 2022-2022 NXP
?
> */
>
> #include <dt-bindings/clock/imx93-clock.h>
> @@ -741,5 +741,14 @@ media_blk_ctrl: system-controller@4ac10000 {
> #power-domain-cells = <1>;
> status = "disabled";
> };
Missing blank line.
> + ele_mu: ele-mu {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "fsl,imx93-ele";
> + mboxes = <&s4muap 0 0 &s4muap 1 0>;
Two phandles, not one.
> + mbox-names = "tx", "rx";
> + fsl,ele_mu_did = <3>;
> + fsl,ele_mu_id = <2>;
> + fsl,ele_mu_max_users = <4>;
> + status = "okay";
Why do you need it?
Run your patches through internal review to fix such obvious mistakes.
There is entire NXP to help you, instead of relying on us to fix trivial
code style.
> + };
> };
> };
Best regards,
Krzysztof
On Wed, 19 Apr 2023 23:25:32 +0530, Pankaj Gupta wrote:
> Documentation update with addition of new device tree
> for NXP ele-mu (Edgelock Enclave Message Unit), driver.
>
> Signed-off-by: Pankaj Gupta <[email protected]>
> ---
> .../bindings/arm/freescale/fsl,ele_mu.yaml | 139 ++++++++++++++++++
> 1 file changed, 139 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.example.dtb: ele_mu: mboxes: [[4294967295, 2, 0], [4294967295, 3, 0]] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/arm/freescale/fsl,ele_mu.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On Wed, Apr 19, 2023 at 3:45 PM Pankaj Gupta <[email protected]> wrote:
>
> v2 Changes:
>
> - Fixed Kernel Test Bot issues.
> - Removed ".../devicetree/bindings/mailbox/fsl,muap.txt"
>
> v1:
>
> The Messaging Unit module enables two processing elements within the SoC to
> communicate and coordinate by passing messages (e.g., data, status and control)
> through its interfaces.
>
> The NXP i.MX EdgeLock Enclave Message Unit (ELE-MUAP) is specifically targeted
> for use between application core and Edgelocke Enclave. It allows to send
> messages to the EL Enclave using a shared mailbox.
>
> Patch-set add the ELE-MU kernel driver for exchanging messages with i.MX NXP
> ELE IP; both from:
> - User-Space Applications via character driver.
> - Kernel-space, used by kernel management layers like DM-Crypt.
What's wrong with existing NXP MU driver?
Hi Daniel,
As discussed already on your query, answering to this, for everybody:
There is no existing NXP MU driver, that is up-streamed.
ele-mu driver is using(dependent on) the underline IMX_MBOX, driver you might be referring to.
Thanks.
Regards
Pankaj
> -----Original Message-----
> From: Daniel Baluta <[email protected]>
> Sent: Monday, April 24, 2023 7:38 PM
> To: Pankaj Gupta <[email protected]>
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; dl-linux-imx <linux-
> [email protected]>; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; Gaurav Jain <[email protected]>; Sahil
> Malhotra <[email protected]>; Aisheng Dong
> <[email protected]>; Varun Sethi <[email protected]>
> Subject: [EXT] Re: [PATCH v2 0/7] *** firmware: imx: NXP Edgelock Enclave
> MUAP Driver ***
>
> Caution: EXT Email
>
> On Wed, Apr 19, 2023 at 3:45 PM Pankaj Gupta <[email protected]>
> wrote:
> >
> > v2 Changes:
> >
> > - Fixed Kernel Test Bot issues.
> > - Removed ".../devicetree/bindings/mailbox/fsl,muap.txt"
> >
> > v1:
> >
> > The Messaging Unit module enables two processing elements within the
> > SoC to communicate and coordinate by passing messages (e.g., data,
> > status and control) through its interfaces.
> >
> > The NXP i.MX EdgeLock Enclave Message Unit (ELE-MUAP) is specifically
> > targeted for use between application core and Edgelocke Enclave. It
> > allows to send messages to the EL Enclave using a shared mailbox.
> >
> > Patch-set add the ELE-MU kernel driver for exchanging messages with
> > i.MX NXP ELE IP; both from:
> > - User-Space Applications via character driver.
> > - Kernel-space, used by kernel management layers like DM-Crypt.
>
>
> What's wrong with existing NXP MU driver?