2021-08-13 14:58:21

by Kevin Tang

[permalink] [raw]
Subject: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

Adds dsi host controller support for the Unisoc's display subsystem.
Adds dsi phy support for the Unisoc's display subsystem.
Only MIPI DSI Displays supported, DP/TV/HMDI will be support
in the feature.

v1:
- Remove dphy and dsi graph binding, merge the dphy driver into the dsi.

v2:
- Use drm_xxx to replace all DRM_XXX.
- Use kzalloc to replace devm_kzalloc for sprd_dsi structure init.

v4:
- Use drmm_helpers to allocate encoder.
- Move allocate encoder and connector to bind function.

v5:
- Drop the dsi ip file prefix.
- Fix the checkpatch warnings.
- Add Signed-off-by for dsi&dphy patch.
- Use the mode_flags of mipi_dsi_device to setup crtc DPI and EDPI mode.

v6:
- Redesign the way to access the dsi register.
- Reduce the dsi_context member variables.
---
drivers/gpu/drm/sprd/Kconfig | 1 +
drivers/gpu/drm/sprd/Makefile | 4 +-
drivers/gpu/drm/sprd/megacores_pll.c | 317 +++++++
drivers/gpu/drm/sprd/megacores_pll.h | 146 +++
drivers/gpu/drm/sprd/sprd_dpu.c | 17 +
drivers/gpu/drm/sprd/sprd_drm.c | 1 +
drivers/gpu/drm/sprd/sprd_drm.h | 1 +
drivers/gpu/drm/sprd/sprd_dsi.c | 1260 ++++++++++++++++++++++++++
drivers/gpu/drm/sprd/sprd_dsi.h | 94 ++
9 files changed, 1840 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sprd/megacores_pll.c
create mode 100644 drivers/gpu/drm/sprd/megacores_pll.h
create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c
create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h

diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig
index 37762c333..3edeaeca0 100644
--- a/drivers/gpu/drm/sprd/Kconfig
+++ b/drivers/gpu/drm/sprd/Kconfig
@@ -5,6 +5,7 @@ config DRM_SPRD
select DRM_GEM_CMA_HELPER
select DRM_KMS_CMA_HELPER
select DRM_KMS_HELPER
+ select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
help
Choose this option if you have a Unisoc chipset.
diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile
index ab12b95e6..73f96c459 100644
--- a/drivers/gpu/drm/sprd/Makefile
+++ b/drivers/gpu/drm/sprd/Makefile
@@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0

obj-y := sprd_drm.o \
- sprd_dpu.o
+ sprd_dpu.o \
+ sprd_dsi.o \
+ megacores_pll.o
diff --git a/drivers/gpu/drm/sprd/megacores_pll.c b/drivers/gpu/drm/sprd/megacores_pll.c
new file mode 100644
index 000000000..0dfd3c372
--- /dev/null
+++ b/drivers/gpu/drm/sprd/megacores_pll.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Unisoc Inc.
+ */
+
+#include <asm/div64.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+#include <linux/string.h>
+
+#include "megacores_pll.h"
+
+#define L 0
+#define H 1
+#define CLK 0
+#define DATA 1
+#define INFINITY 0xffffffff
+#define MIN_OUTPUT_FREQ (100)
+
+#define AVERAGE(a, b) (min(a, b) + abs((b) - (a)) / 2)
+
+/* sharkle */
+#define VCO_BAND_LOW 750
+#define VCO_BAND_MID 1100
+#define VCO_BAND_HIGH 1500
+#define PHY_REF_CLK 26000
+
+static int dphy_calc_pll_param(struct dphy_pll *pll)
+{
+ const u32 khz = 1000;
+ const u32 mhz = 1000000;
+ const unsigned long long factor = 100;
+ unsigned long long tmp;
+ int i;
+
+ pll->potential_fvco = pll->freq / khz;
+ pll->ref_clk = PHY_REF_CLK / khz;
+
+ for (i = 0; i < 4; ++i) {
+ if (pll->potential_fvco >= VCO_BAND_LOW &&
+ pll->potential_fvco <= VCO_BAND_HIGH) {
+ pll->fvco = pll->potential_fvco;
+ pll->out_sel = BIT(i);
+ break;
+ }
+ pll->potential_fvco <<= 1;
+ }
+ if (pll->fvco == 0)
+ return -EINVAL;
+
+ if (pll->fvco >= VCO_BAND_LOW && pll->fvco <= VCO_BAND_MID) {
+ /* vco band control */
+ pll->vco_band = 0x0;
+ /* low pass filter control */
+ pll->lpf_sel = 1;
+ } else if (pll->fvco > VCO_BAND_MID && pll->fvco <= VCO_BAND_HIGH) {
+ pll->vco_band = 0x1;
+ pll->lpf_sel = 0;
+ } else
+ return -EINVAL;
+
+ pll->nint = pll->fvco / pll->ref_clk;
+ tmp = pll->fvco * factor * mhz;
+ do_div(tmp, pll->ref_clk);
+ tmp = tmp - pll->nint * factor * mhz;
+ tmp *= BIT(20);
+ do_div(tmp, 100000000);
+ pll->kint = (u32)tmp;
+ pll->refin = 3; /* pre-divider bypass */
+ pll->sdm_en = true; /* use fraction N PLL */
+ pll->fdk_s = 0x1; /* fraction */
+ pll->cp_s = 0x0;
+ pll->det_delay = 0x1;
+
+ return 0;
+}
+
+static void dphy_set_pll_reg(struct dphy_pll *pll, struct regmap *regmap)
+{
+ struct pll_reg *reg = &pll->reg;
+ u8 *val;
+ int i;
+
+ u8 reg_addr[] = {
+ 0x03, 0x04, 0x06, 0x08, 0x09,
+ 0x0a, 0x0b, 0x0e, 0x0f
+ };
+
+ reg->_03.bits.prbs_bist = 1;
+ reg->_03.bits.en_lp_treot = true;
+ reg->_03.bits.lpf_sel = pll->lpf_sel;
+ reg->_03.bits.txfifo_bypass = 0;
+ reg->_04.bits.div = pll->div;
+ reg->_04.bits.masterof8lane = 1;
+ reg->_04.bits.cp_s = pll->cp_s;
+ reg->_04.bits.fdk_s = pll->fdk_s;
+ reg->_06.bits.nint = pll->nint;
+ reg->_08.bits.vco_band = pll->vco_band;
+ reg->_08.bits.sdm_en = pll->sdm_en;
+ reg->_08.bits.refin = pll->refin;
+ reg->_09.bits.kint_h = pll->kint >> 12;
+ reg->_0a.bits.kint_m = (pll->kint >> 4) & 0xff;
+ reg->_0b.bits.out_sel = pll->out_sel;
+ reg->_0b.bits.kint_l = pll->kint & 0xf;
+ reg->_0e.bits.pll_pu_byp = 0;
+ reg->_0e.bits.pll_pu = 0;
+ reg->_0e.bits.stopstate_sel = 1;
+ reg->_0f.bits.det_delay = pll->det_delay;
+
+ val = (u8 *)&reg;
+
+ for (i = 0; i < sizeof(reg_addr); ++i) {
+ regmap_write(regmap, reg_addr[i], val[i]);
+ DRM_DEBUG("%02x: %02x\n", reg_addr[i], val[i]);
+ }
+}
+
+int dphy_pll_config(struct dsi_context *ctx)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ struct regmap *regmap = ctx->regmap;
+ struct dphy_pll *pll = ctx->pll;
+ int ret;
+
+ pll->freq = dsi->slave->hs_rate;
+
+ /* FREQ = 26M * (NINT + KINT / 2^20) / out_sel */
+ ret = dphy_calc_pll_param(pll);
+ if (ret) {
+ drm_err(dsi->drm, "failed to calculate dphy pll parameters\n");
+ return ret;
+ }
+ dphy_set_pll_reg(pll, regmap);
+
+ return 0;
+}
+
+static void dphy_set_timing_reg(struct regmap *regmap, int type, u8 val[])
+{
+ switch (type) {
+ case REQUEST_TIME:
+ regmap_write(regmap, 0x31, val[CLK]);
+ regmap_write(regmap, 0x41, val[DATA]);
+ regmap_write(regmap, 0x51, val[DATA]);
+ regmap_write(regmap, 0x61, val[DATA]);
+ regmap_write(regmap, 0x71, val[DATA]);
+
+ regmap_write(regmap, 0x90, val[CLK]);
+ regmap_write(regmap, 0xa0, val[DATA]);
+ regmap_write(regmap, 0xb0, val[DATA]);
+ regmap_write(regmap, 0xc0, val[DATA]);
+ regmap_write(regmap, 0xd0, val[DATA]);
+ break;
+ case PREPARE_TIME:
+ regmap_write(regmap, 0x32, val[CLK]);
+ regmap_write(regmap, 0x42, val[DATA]);
+ regmap_write(regmap, 0x52, val[DATA]);
+ regmap_write(regmap, 0x62, val[DATA]);
+ regmap_write(regmap, 0x72, val[DATA]);
+
+ regmap_write(regmap, 0x91, val[CLK]);
+ regmap_write(regmap, 0xa1, val[DATA]);
+ regmap_write(regmap, 0xb1, val[DATA]);
+ regmap_write(regmap, 0xc1, val[DATA]);
+ regmap_write(regmap, 0xd1, val[DATA]);
+ break;
+ case ZERO_TIME:
+ regmap_write(regmap, 0x33, val[CLK]);
+ regmap_write(regmap, 0x43, val[DATA]);
+ regmap_write(regmap, 0x53, val[DATA]);
+ regmap_write(regmap, 0x63, val[DATA]);
+ regmap_write(regmap, 0x73, val[DATA]);
+
+ regmap_write(regmap, 0x92, val[CLK]);
+ regmap_write(regmap, 0xa2, val[DATA]);
+ regmap_write(regmap, 0xb2, val[DATA]);
+ regmap_write(regmap, 0xc2, val[DATA]);
+ regmap_write(regmap, 0xd2, val[DATA]);
+ break;
+ case TRAIL_TIME:
+ regmap_write(regmap, 0x34, val[CLK]);
+ regmap_write(regmap, 0x44, val[DATA]);
+ regmap_write(regmap, 0x54, val[DATA]);
+ regmap_write(regmap, 0x64, val[DATA]);
+ regmap_write(regmap, 0x74, val[DATA]);
+
+ regmap_write(regmap, 0x93, val[CLK]);
+ regmap_write(regmap, 0xa3, val[DATA]);
+ regmap_write(regmap, 0xb3, val[DATA]);
+ regmap_write(regmap, 0xc3, val[DATA]);
+ regmap_write(regmap, 0xd3, val[DATA]);
+ break;
+ case EXIT_TIME:
+ regmap_write(regmap, 0x36, val[CLK]);
+ regmap_write(regmap, 0x46, val[DATA]);
+ regmap_write(regmap, 0x56, val[DATA]);
+ regmap_write(regmap, 0x66, val[DATA]);
+ regmap_write(regmap, 0x76, val[DATA]);
+
+ regmap_write(regmap, 0x95, val[CLK]);
+ regmap_write(regmap, 0xA5, val[DATA]);
+ regmap_write(regmap, 0xB5, val[DATA]);
+ regmap_write(regmap, 0xc5, val[DATA]);
+ regmap_write(regmap, 0xd5, val[DATA]);
+ break;
+ case CLKPOST_TIME:
+ regmap_write(regmap, 0x35, val[CLK]);
+ regmap_write(regmap, 0x94, val[CLK]);
+ break;
+
+ /* the following just use default value */
+ case SETTLE_TIME:
+ case TA_GET:
+ case TA_GO:
+ case TA_SURE:
+ break;
+ default:
+ break;
+ }
+}
+
+void dphy_timing_config(struct dsi_context *ctx)
+{
+ struct regmap *regmap = ctx->regmap;
+ struct dphy_pll *pll = ctx->pll;
+ const u32 factor = 2;
+ const u32 scale = 100;
+ u32 t_ui, t_byteck, t_half_byteck;
+ u32 range[2], constant;
+ u8 val[2];
+ u32 tmp = 0;
+
+ /* t_ui: 1 ui, byteck: 8 ui, half byteck: 4 ui */
+ t_ui = 1000 * scale / (pll->freq / 1000);
+ t_byteck = t_ui << 3;
+ t_half_byteck = t_ui << 2;
+ constant = t_ui << 1;
+
+ /* REQUEST_TIME: HS T-LPX: LP-01
+ * For T-LPX, mipi spec defined min value is 50ns,
+ * but maybe it shouldn't be too small, because BTA,
+ * LP-10, LP-00, LP-01, all of this is related to T-LPX.
+ */
+ range[L] = 50 * scale;
+ range[H] = INFINITY;
+ val[CLK] = DIV_ROUND_UP(range[L] * (factor << 1), t_byteck) - 2;
+ val[DATA] = val[CLK];
+ dphy_set_timing_reg(regmap, REQUEST_TIME, val);
+
+ /* PREPARE_TIME: HS sequence: LP-00 */
+ range[L] = 38 * scale;
+ range[H] = 95 * scale;
+ tmp = AVERAGE(range[L], range[H]);
+ val[CLK] = DIV_ROUND_UP(AVERAGE(range[L], range[H]),
+ t_half_byteck) - 1;
+ range[L] = 40 * scale + 4 * t_ui;
+ range[H] = 85 * scale + 6 * t_ui;
+ tmp |= AVERAGE(range[L], range[H]) << 16;
+ val[DATA] = DIV_ROUND_UP(AVERAGE(range[L], range[H]),
+ t_half_byteck) - 1;
+ dphy_set_timing_reg(regmap, PREPARE_TIME, val);
+
+ /* ZERO_TIME: HS-ZERO */
+ range[L] = 300 * scale;
+ range[H] = INFINITY;
+ val[CLK] = DIV_ROUND_UP(range[L] * factor + (tmp & 0xffff)
+ - 525 * t_byteck / 100, t_byteck) - 2;
+ range[L] = 145 * scale + 10 * t_ui;
+ val[DATA] = DIV_ROUND_UP(range[L] * factor
+ + ((tmp >> 16) & 0xffff) - 525 * t_byteck / 100,
+ t_byteck) - 2;
+ dphy_set_timing_reg(regmap, ZERO_TIME, val);
+
+ /* TRAIL_TIME: HS-TRAIL */
+ range[L] = 60 * scale;
+ range[H] = INFINITY;
+ val[CLK] = DIV_ROUND_UP(range[L] * factor - constant, t_half_byteck);
+ range[L] = max(8 * t_ui, 60 * scale + 4 * t_ui);
+ val[DATA] = DIV_ROUND_UP(range[L] * 3 / 2 - constant, t_half_byteck) - 2;
+ dphy_set_timing_reg(regmap, TRAIL_TIME, val);
+
+ /* EXIT_TIME: */
+ range[L] = 100 * scale;
+ range[H] = INFINITY;
+ val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2;
+ val[DATA] = val[CLK];
+ dphy_set_timing_reg(regmap, EXIT_TIME, val);
+
+ /* CLKPOST_TIME: */
+ range[L] = 60 * scale + 52 * t_ui;
+ range[H] = INFINITY;
+ val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2;
+ val[DATA] = val[CLK];
+ dphy_set_timing_reg(regmap, CLKPOST_TIME, val);
+
+ /* SETTLE_TIME:
+ * This time is used for receiver. So for transmitter,
+ * it can be ignored.
+ */
+
+ /* TA_GO:
+ * transmitter drives bridge state(LP-00) before releasing control,
+ * reg 0x1f default value: 0x04, which is good.
+ */
+
+ /* TA_SURE:
+ * After LP-10 state and before bridge state(LP-00),
+ * reg 0x20 default value: 0x01, which is good.
+ */
+
+ /* TA_GET:
+ * receiver drives Bridge state(LP-00) before releasing control
+ * reg 0x21 default value: 0x03, which is good.
+ */
+}
diff --git a/drivers/gpu/drm/sprd/megacores_pll.h b/drivers/gpu/drm/sprd/megacores_pll.h
new file mode 100644
index 000000000..bf20aae65
--- /dev/null
+++ b/drivers/gpu/drm/sprd/megacores_pll.h
@@ -0,0 +1,146 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Unisoc Inc.
+ */
+
+#ifndef _MEGACORES_PLL_H_
+#define _MEGACORES_PLL_H_
+
+#include "sprd_dsi.h"
+
+enum PLL_TIMING {
+ NONE,
+ REQUEST_TIME,
+ PREPARE_TIME,
+ SETTLE_TIME,
+ ZERO_TIME,
+ TRAIL_TIME,
+ EXIT_TIME,
+ CLKPOST_TIME,
+ TA_GET,
+ TA_GO,
+ TA_SURE,
+ TA_WAIT,
+};
+
+struct pll_reg {
+ union __reg_03__ {
+ struct __03 {
+ u8 prbs_bist: 1;
+ u8 en_lp_treot: 1;
+ u8 lpf_sel: 4;
+ u8 txfifo_bypass: 1;
+ u8 freq_hopping: 1;
+ } bits;
+ u8 val;
+ } _03;
+ union __reg_04__ {
+ struct __04 {
+ u8 div: 3;
+ u8 masterof8lane: 1;
+ u8 hop_trig: 1;
+ u8 cp_s: 2;
+ u8 fdk_s: 1;
+ } bits;
+ u8 val;
+ } _04;
+ union __reg_06__ {
+ struct __06 {
+ u8 nint: 7;
+ u8 mod_en: 1;
+ } bits;
+ u8 val;
+ } _06;
+ union __reg_07__ {
+ struct __07 {
+ u8 kdelta_h: 8;
+ } bits;
+ u8 val;
+ } _07;
+ union __reg_08__ {
+ struct __08 {
+ u8 vco_band: 1;
+ u8 sdm_en: 1;
+ u8 refin: 2;
+ u8 kdelta_l: 4;
+ } bits;
+ u8 val;
+ } _08;
+ union __reg_09__ {
+ struct __09 {
+ u8 kint_h: 8;
+ } bits;
+ u8 val;
+ } _09;
+ union __reg_0a__ {
+ struct __0a {
+ u8 kint_m: 8;
+ } bits;
+ u8 val;
+ } _0a;
+ union __reg_0b__ {
+ struct __0b {
+ u8 out_sel: 4;
+ u8 kint_l: 4;
+ } bits;
+ u8 val;
+ } _0b;
+ union __reg_0c__ {
+ struct __0c {
+ u8 kstep_h: 8;
+ } bits;
+ u8 val;
+ } _0c;
+ union __reg_0d__ {
+ struct __0d {
+ u8 kstep_m: 8;
+ } bits;
+ u8 val;
+ } _0d;
+ union __reg_0e__ {
+ struct __0e {
+ u8 pll_pu_byp: 1;
+ u8 pll_pu: 1;
+ u8 hsbist_len: 2;
+ u8 stopstate_sel: 1;
+ u8 kstep_l: 3;
+ } bits;
+ u8 val;
+ } _0e;
+ union __reg_0f__ {
+ struct __0f {
+ u8 det_delay:2;
+ u8 kdelta: 4;
+ u8 ldo0p4:2;
+ } bits;
+ u8 val;
+ } _0f;
+};
+
+struct dphy_pll {
+ u8 refin; /* Pre-divider control signal */
+ u8 cp_s; /* 00: SDM_EN=1, 10: SDM_EN=0 */
+ u8 fdk_s; /* PLL mode control: integer or fraction */
+ u8 sdm_en;
+ u8 div;
+ u8 int_n; /* integer N PLL */
+ u32 ref_clk; /* dphy reference clock, unit: MHz */
+ u32 freq; /* panel config, unit: KHz */
+ u32 fvco;
+ u32 potential_fvco;
+ u32 nint; /* sigma delta modulator NINT control */
+ u32 kint; /* sigma delta modulator KINT control */
+ u8 lpf_sel; /* low pass filter control */
+ u8 out_sel; /* post divider control */
+ u8 vco_band; /* vco range */
+ u8 det_delay;
+
+ struct pll_reg reg;
+};
+
+struct dsi_context;
+
+int dphy_pll_config(struct dsi_context *ctx);
+void dphy_timing_config(struct dsi_context *ctx);
+
+#endif /* _MEGACORES_PLL_H_ */
diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c
index 448dd4fb6..4e3b30abe 100644
--- a/drivers/gpu/drm/sprd/sprd_dpu.c
+++ b/drivers/gpu/drm/sprd/sprd_dpu.c
@@ -25,6 +25,7 @@

#include "sprd_drm.h"
#include "sprd_dpu.h"
+#include "sprd_dsi.h"

/* Global control registers */
#define REG_DPU_CTRL 0x04
@@ -686,9 +687,25 @@ static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc)
{
struct sprd_dpu *dpu = to_sprd_crtc(crtc);
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+ struct drm_encoder *encoder;
+ struct mipi_dsi_device *slave;
+ struct sprd_dsi *dsi;

drm_display_mode_to_videomode(mode, &dpu->ctx.vm);

+ drm_for_each_encoder(encoder, crtc->dev) {
+ if (encoder->crtc != crtc)
+ continue;
+
+ dsi = encoder_to_dsi(encoder);
+ slave = dsi->slave;
+
+ if (slave->mode_flags & MIPI_DSI_MODE_VIDEO)
+ dpu->ctx.if_type = SPRD_DPU_IF_DPI;
+ else
+ dpu->ctx.if_type = SPRD_DPU_IF_EDPI;
+ }
+
sprd_dpi_init(dpu);
}

diff --git a/drivers/gpu/drm/sprd/sprd_drm.c b/drivers/gpu/drm/sprd/sprd_drm.c
index 549b71278..68cf0933c 100644
--- a/drivers/gpu/drm/sprd/sprd_drm.c
+++ b/drivers/gpu/drm/sprd/sprd_drm.c
@@ -183,6 +183,7 @@ static struct platform_driver sprd_drm_driver = {
static struct platform_driver *sprd_drm_drivers[] = {
&sprd_drm_driver,
&sprd_dpu_driver,
+ &sprd_dsi_driver,
};

static int __init sprd_drm_init(void)
diff --git a/drivers/gpu/drm/sprd/sprd_drm.h b/drivers/gpu/drm/sprd/sprd_drm.h
index 85d4a8b9f..95d1b972f 100644
--- a/drivers/gpu/drm/sprd/sprd_drm.h
+++ b/drivers/gpu/drm/sprd/sprd_drm.h
@@ -14,5 +14,6 @@ struct sprd_drm {
};

extern struct platform_driver sprd_dpu_driver;
+extern struct platform_driver sprd_dsi_driver;

#endif /* _SPRD_DRM_H_ */
diff --git a/drivers/gpu/drm/sprd/sprd_dsi.c b/drivers/gpu/drm/sprd/sprd_dsi.c
new file mode 100644
index 000000000..5ce98fe90
--- /dev/null
+++ b/drivers/gpu/drm/sprd/sprd_dsi.c
@@ -0,0 +1,1260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Unisoc Inc.
+ */
+
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_graph.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+
+#include "sprd_drm.h"
+#include "sprd_dpu.h"
+#include "sprd_dsi.h"
+
+#define SOFT_RESET 0x04
+#define MASK_PROTOCOL_INT 0x0C
+#define MASK_INTERNAL_INT 0x14
+#define DSI_MODE_CFG 0x18
+
+#define VIRTUAL_CHANNEL_ID 0x1C
+#define GEN_RX_VCID GENMASK(1, 0)
+#define VIDEO_PKT_VCID GENMASK(3, 2)
+
+#define DPI_VIDEO_FORMAT 0x20
+#define DPI_VIDEO_MODE_FORMAT GENMASK(5, 0)
+#define LOOSELY18_EN BIT(6)
+
+#define VIDEO_PKT_CONFIG 0x24
+#define VIDEO_PKT_SIZE GENMASK(15, 0)
+#define VIDEO_LINE_CHUNK_NUM GENMASK(31, 16)
+
+#define VIDEO_LINE_HBLK_TIME 0x28
+#define VIDEO_LINE_HBP_TIME GENMASK(15, 0)
+#define VIDEO_LINE_HSA_TIME GENMASK(31, 16)
+
+#define VIDEO_LINE_TIME 0x2C
+
+#define VIDEO_VBLK_LINES 0x30
+#define VFP_LINES GENMASK(9, 0)
+#define VBP_LINES GENMASK(19, 10)
+#define VSA_LINES GENMASK(29, 20)
+
+#define VIDEO_VACTIVE_LINES 0x34
+
+#define VID_MODE_CFG 0x38
+#define VID_MODE_TYPE GENMASK(1, 0)
+#define LP_VSA_EN BIT(8)
+#define LP_VBP_EN BIT(9)
+#define LP_VFP_EN BIT(10)
+#define LP_VACT_EN BIT(11)
+#define LP_HBP_EN BIT(12)
+#define LP_HFP_EN BIT(13)
+#define FRAME_BTA_ACK_EN BIT(14)
+#define LP_CMD_EN BIT(15)
+
+#define TIMEOUT_CNT_CLK_CONFIG 0x40
+#define HTX_TO_CONFIG 0x44
+#define LRX_H_TO_CONFIG 0x48
+
+#define TX_ESC_CLK_CONFIG 0x5C
+
+#define CMD_MODE_CFG 0x68
+#define TEAR_FX_EN BIT(0)
+#define ACK_RQST_EN BIT(1)
+#define PPS_TX BIT(5)
+#define EXQ_TX BIT(6)
+#define CMC_TX BIT(7)
+#define GEN_SW_0P_TX BIT(8)
+#define GEN_SW_1P_TX BIT(9)
+#define GEN_SW_2P_TX BIT(10)
+#define GEN_SR_0P_TX BIT(11)
+#define GEN_SR_1P_TX BIT(12)
+#define GEN_SR_2P_TX BIT(13)
+#define GEN_LW_TX BIT(14)
+#define DCS_SW_0P_TX BIT(16)
+#define DCS_SW_1P_TX BIT(17)
+#define DCS_SR_0P_TX BIT(18)
+#define DCS_LW_TX BIT(19)
+#define MAX_RD_PKT_SIZE BIT(24)
+
+#define GEN_HDR 0x6C
+#define GEN_DT GENMASK(5, 0)
+#define GEN_VC GENMASK(7, 6)
+#define GEN_WC_LSBYTE GENMASK(15, 8)
+#define GEN_WC_MSBYTE GENMASK(23, 16)
+
+#define GEN_PLD_DATA 0x70
+#define GEN_PLD_B1 GENMASK(7, 0)
+#define GEN_PLD_B2 GENMASK(15, 8)
+#define GEN_PLD_B3 GENMASK(23, 16)
+#define GEN_PLD_B4 GENMASK(31, 24)
+
+#define PHY_CLK_LANE_LP_CTRL 0x74
+#define PHY_CLKLANE_TX_REQ_HS BIT(0)
+#define AUTO_CLKLANE_CTRL_EN BIT(1)
+
+#define PHY_INTERFACE_CTRL 0x78
+#define RF_PHY_SHUTDOWN BIT(0)
+#define RF_PHY_RESET_N BIT(1)
+#define RF_PHY_CLK_EN BIT(2)
+
+#define CMD_MODE_STATUS 0x98
+#define GEN_CMD_RDCMD_ONGOING BIT(0)
+#define GEN_CMD_RDATA_FIFO_EMPTY BIT(1)
+#define GEN_CMD_RDATA_FIFO_FULL BIT(2)
+#define GEN_CMD_WDATA_FIFO_EMPTY BIT(3)
+#define GEN_CMD_WDATA_FIFO_FULL BIT(4)
+#define GEN_CMD_CMD_FIFO_EMPTY BIT(5)
+#define GEN_CMD_CMD_FIFO_FULL BIT(6)
+#define GEN_CMD_RDCMD_DONE BIT(7)
+
+#define PHY_STATUS 0x9C
+#define PHY_LOCK BIT(1)
+
+#define PHY_MIN_STOP_TIME 0xA0
+#define PHY_LANE_NUM_CONFIG 0xA4
+
+#define PHY_CLKLANE_TIME_CONFIG 0xA8
+#define PHY_CLKLANE_LP_TO_HS_TIME GENMASK(15, 0)
+#define PHY_CLKLANE_HS_TO_LP_TIME GENMASK(31, 16)
+
+#define PHY_DATALANE_TIME_CONFIG 0xAC
+#define PHY_DATALANE_LP_TO_HS_TIME GENMASK(15, 0)
+#define PHY_DATALANE_HS_TO_LP_TIME GENMASK(31, 16)
+
+#define MAX_READ_TIME 0xB0
+
+#define RX_PKT_CHECK_CONFIG 0xB4
+#define RX_PKT_ECC_EN BIT(0)
+#define RX_PKT_CRC_EN BIT(1)
+
+#define TA_EN 0xB8
+
+#define EOTP_EN 0xBC
+#define TX_EOTP_EN BIT(0)
+#define RX_EOTP_EN BIT(1)
+
+#define VIDEO_NULLPKT_SIZE 0xC0
+#define DCS_WM_PKT_SIZE 0xC4
+#define PROTOCOL_INT_CLR 0xC8
+#define INTERNAL_INT_CLR 0xCC
+
+#define VIDEO_SIG_DELAY_CONFIG 0xD0
+#define VIDEO_SIG_DELAY GENMASK(23, 0)
+#define VIDEO_SIG_DELAY_MODE BIT(24)
+
+#define PHY_TST_CTRL0 0xF0
+#define PHY_TESTCLR BIT(0)
+#define PHY_TESTCLK BIT(1)
+
+#define PHY_TST_CTRL1 0xF4
+#define PHY_TESTDIN GENMASK(7, 0)
+#define PHY_TESTDOUT GENMASK(15, 8)
+#define PHY_TESTEN BIT(16)
+
+#define host_to_dsi(host) \
+ container_of(host, struct sprd_dsi, host)
+#define connector_to_dsi(connector) \
+ container_of(connector, struct sprd_dsi, connector)
+
+static inline u32
+dsi_reg_rd(struct dsi_context *ctx, u32 offset, u32 mask,
+ u32 shift)
+{
+ return (readl(ctx->base + offset) & mask) >> shift;
+}
+
+static inline void
+dsi_reg_wr(struct dsi_context *ctx, u32 offset, u32 mask,
+ u32 shift, u32 val)
+{
+ u32 ret;
+
+ ret = readl(ctx->base + offset);
+ ret &= ~mask;
+ ret |= (val << shift) & mask;
+ writel(ret, ctx->base + offset);
+}
+
+static inline void
+dsi_reg_up(struct dsi_context *ctx, u32 offset, u32 mask,
+ u32 val)
+{
+ u32 ret = readl(ctx->base + offset);
+
+ writel((ret & ~mask) | (val & mask), ctx->base + offset);
+}
+
+static int regmap_tst_io_write(void *context, u32 reg, u32 val)
+{
+ struct sprd_dsi *dsi = context;
+ struct dsi_context *ctx = &dsi->ctx;
+
+ if (val > 0xff || reg > 0xff)
+ return -EINVAL;
+
+ drm_dbg(dsi->drm, "reg = 0x%02x, val = 0x%02x\n", reg, val);
+
+ dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, PHY_TESTEN);
+ dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, reg);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
+ dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, 0);
+ dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, val);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
+
+ return 0;
+}
+
+static int regmap_tst_io_read(void *context, u32 reg, u32 *val)
+{
+ struct sprd_dsi *dsi = context;
+ struct dsi_context *ctx = &dsi->ctx;
+ int ret;
+
+ if (reg > 0xff)
+ return -EINVAL;
+
+ dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, PHY_TESTEN);
+ dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, reg);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
+ dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, 0);
+
+ udelay(1);
+
+ ret = dsi_reg_rd(ctx, PHY_TST_CTRL1, PHY_TESTDOUT, 8);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+
+ drm_dbg(dsi->drm, "reg = 0x%02x, val = 0x%02x\n", reg, *val);
+ return 0;
+}
+
+static struct regmap_bus regmap_tst_io = {
+ .reg_write = regmap_tst_io_write,
+ .reg_read = regmap_tst_io_read,
+};
+
+static const struct regmap_config byte_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int dphy_wait_pll_locked(struct dsi_context *ctx)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ int i;
+
+ for (i = 0; i < 50000; i++) {
+ if (dsi_reg_rd(ctx, PHY_STATUS, PHY_LOCK, 1))
+ return 0;
+ udelay(3);
+ }
+
+ drm_err(dsi->drm, "dphy pll can not be locked\n");
+ return -ETIMEDOUT;
+}
+
+static int dsi_wait_tx_payload_fifo_empty(struct dsi_context *ctx)
+{
+ int i;
+
+ for (i = 0; i < 5000; i++) {
+ if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_WDATA_FIFO_EMPTY, 3))
+ return 0;
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int dsi_wait_tx_cmd_fifo_empty(struct dsi_context *ctx)
+{
+ int i;
+
+ for (i = 0; i < 5000; i++) {
+ if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_CMD_FIFO_EMPTY, 5))
+ return 0;
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int dsi_wait_rd_resp_completed(struct dsi_context *ctx)
+{
+ int i;
+
+ for (i = 0; i < 10000; i++) {
+ if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDCMD_DONE, 7))
+ return 0;
+ udelay(10);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static u16 calc_bytes_per_pixel_x100(int coding)
+{
+ u16 Bpp_x100;
+
+ switch (coding) {
+ case COLOR_CODE_16BIT_CONFIG1:
+ case COLOR_CODE_16BIT_CONFIG2:
+ case COLOR_CODE_16BIT_CONFIG3:
+ Bpp_x100 = 200;
+ break;
+ case COLOR_CODE_18BIT_CONFIG1:
+ case COLOR_CODE_18BIT_CONFIG2:
+ Bpp_x100 = 225;
+ break;
+ case COLOR_CODE_24BIT:
+ Bpp_x100 = 300;
+ break;
+ case COLOR_CODE_COMPRESSTION:
+ Bpp_x100 = 100;
+ break;
+ case COLOR_CODE_20BIT_YCC422_LOOSELY:
+ Bpp_x100 = 250;
+ break;
+ case COLOR_CODE_24BIT_YCC422:
+ Bpp_x100 = 300;
+ break;
+ case COLOR_CODE_16BIT_YCC422:
+ Bpp_x100 = 200;
+ break;
+ case COLOR_CODE_30BIT:
+ Bpp_x100 = 375;
+ break;
+ case COLOR_CODE_36BIT:
+ Bpp_x100 = 450;
+ break;
+ case COLOR_CODE_12BIT_YCC420:
+ Bpp_x100 = 150;
+ break;
+ default:
+ DRM_ERROR("invalid color coding");
+ Bpp_x100 = 0;
+ break;
+ }
+
+ return Bpp_x100;
+}
+
+static u8 calc_video_size_step(int coding)
+{
+ u8 video_size_step;
+
+ switch (coding) {
+ case COLOR_CODE_16BIT_CONFIG1:
+ case COLOR_CODE_16BIT_CONFIG2:
+ case COLOR_CODE_16BIT_CONFIG3:
+ case COLOR_CODE_18BIT_CONFIG1:
+ case COLOR_CODE_18BIT_CONFIG2:
+ case COLOR_CODE_24BIT:
+ case COLOR_CODE_COMPRESSTION:
+ return video_size_step = 1;
+ case COLOR_CODE_20BIT_YCC422_LOOSELY:
+ case COLOR_CODE_24BIT_YCC422:
+ case COLOR_CODE_16BIT_YCC422:
+ case COLOR_CODE_30BIT:
+ case COLOR_CODE_36BIT:
+ case COLOR_CODE_12BIT_YCC420:
+ return video_size_step = 2;
+ default:
+ DRM_ERROR("invalid color coding");
+ return 0;
+ }
+}
+
+static u16 round_video_size(int coding, u16 video_size)
+{
+ switch (coding) {
+ case COLOR_CODE_16BIT_YCC422:
+ case COLOR_CODE_24BIT_YCC422:
+ case COLOR_CODE_20BIT_YCC422_LOOSELY:
+ case COLOR_CODE_12BIT_YCC420:
+ /* round up active H pixels to a multiple of 2 */
+ if ((video_size % 2) != 0)
+ video_size += 1;
+ break;
+ default:
+ break;
+ }
+
+ return video_size;
+}
+
+#define SPRD_MIPI_DSI_FMT_DSC 0xff
+static u32 fmt_to_coding(u32 fmt)
+{
+ switch (fmt) {
+ case MIPI_DSI_FMT_RGB565:
+ return COLOR_CODE_16BIT_CONFIG1;
+ case MIPI_DSI_FMT_RGB666:
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ return COLOR_CODE_18BIT_CONFIG1;
+ case MIPI_DSI_FMT_RGB888:
+ return COLOR_CODE_24BIT;
+ case SPRD_MIPI_DSI_FMT_DSC:
+ return COLOR_CODE_COMPRESSTION;
+ default:
+ DRM_ERROR("Unsupported format (%d)\n", fmt);
+ return COLOR_CODE_24BIT;
+ }
+}
+
+#define ns_to_cycle(ns, byte_clk) \
+ DIV_ROUND_UP((ns) * (byte_clk), 1000000)
+
+static void sprd_dsi_init(struct dsi_context *ctx)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ u32 byte_clk = dsi->slave->hs_rate / 8;
+ u16 data_hs2lp, data_lp2hs, clk_hs2lp, clk_lp2hs;
+ u16 max_rd_time;
+ int div;
+
+ writel(0, ctx->base + SOFT_RESET);
+ writel(0xffffffff, ctx->base + MASK_PROTOCOL_INT);
+ writel(0xffffffff, ctx->base + MASK_INTERNAL_INT);
+ writel(1, ctx->base + DSI_MODE_CFG);
+ dsi_reg_up(ctx, EOTP_EN, RX_EOTP_EN, 0);
+ dsi_reg_up(ctx, EOTP_EN, TX_EOTP_EN, 0);
+ dsi_reg_up(ctx, RX_PKT_CHECK_CONFIG, RX_PKT_ECC_EN, RX_PKT_ECC_EN);
+ dsi_reg_up(ctx, RX_PKT_CHECK_CONFIG, RX_PKT_CRC_EN, RX_PKT_CRC_EN);
+ writel(1, ctx->base + TA_EN);
+ dsi_reg_up(ctx, VIRTUAL_CHANNEL_ID, VIDEO_PKT_VCID, 0);
+ dsi_reg_up(ctx, VIRTUAL_CHANNEL_ID, GEN_RX_VCID, 0);
+
+ div = DIV_ROUND_UP(byte_clk, dsi->slave->lp_rate);
+ writel(div, ctx->base + TX_ESC_CLK_CONFIG);
+
+ max_rd_time = ns_to_cycle(ctx->max_rd_time, byte_clk);
+ writel(max_rd_time, ctx->base + MAX_READ_TIME);
+
+ data_hs2lp = ns_to_cycle(ctx->data_hs2lp, byte_clk);
+ data_lp2hs = ns_to_cycle(ctx->data_lp2hs, byte_clk);
+ clk_hs2lp = ns_to_cycle(ctx->clk_hs2lp, byte_clk);
+ clk_lp2hs = ns_to_cycle(ctx->clk_lp2hs, byte_clk);
+ dsi_reg_wr(ctx, PHY_DATALANE_TIME_CONFIG,
+ PHY_DATALANE_HS_TO_LP_TIME, 16, data_hs2lp);
+ dsi_reg_wr(ctx, PHY_DATALANE_TIME_CONFIG,
+ PHY_DATALANE_LP_TO_HS_TIME, 0, data_lp2hs);
+ dsi_reg_wr(ctx, PHY_CLKLANE_TIME_CONFIG,
+ PHY_CLKLANE_HS_TO_LP_TIME, 16, clk_hs2lp);
+ dsi_reg_wr(ctx, PHY_CLKLANE_TIME_CONFIG,
+ PHY_CLKLANE_LP_TO_HS_TIME, 0, clk_lp2hs);
+
+ writel(1, ctx->base + SOFT_RESET);
+}
+
+/*
+ * Free up resources and shutdown host controller and PHY
+ */
+static void sprd_dsi_fini(struct dsi_context *ctx)
+{
+ writel(0xffffffff, ctx->base + MASK_PROTOCOL_INT);
+ writel(0xffffffff, ctx->base + MASK_INTERNAL_INT);
+ writel(0, ctx->base + SOFT_RESET);
+}
+
+/*
+ * If not in burst mode, it will compute the video and null packet sizes
+ * according to necessity.
+ * Configure timers for data lanes and/or clock lane to return to LP when
+ * bandwidth is not filled by data.
+ */
+static int sprd_dsi_dpi_video(struct dsi_context *ctx)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ struct videomode *vm = &ctx->vm;
+ u32 byte_clk = dsi->slave->hs_rate / 8;
+ u16 Bpp_x100;
+ u16 video_size;
+ u32 ratio_x1000;
+ u16 null_pkt_size = 0;
+ u8 video_size_step;
+ u32 hs_to;
+ u32 total_bytes;
+ u32 bytes_per_chunk;
+ u32 chunks = 0;
+ u32 bytes_left = 0;
+ u32 chunk_overhead;
+ const u8 pkt_header = 6;
+ u8 coding;
+ int div;
+ u16 hline;
+ u16 byte_cycle;
+
+ coding = fmt_to_coding(dsi->slave->format);
+ video_size = round_video_size(coding, vm->hactive);
+ Bpp_x100 = calc_bytes_per_pixel_x100(coding);
+ video_size_step = calc_video_size_step(coding);
+ ratio_x1000 = byte_clk * 1000 / (vm->pixelclock / 1000);
+ hline = vm->hactive + vm->hsync_len + vm->hfront_porch +
+ vm->hback_porch;
+
+ writel(0, ctx->base + SOFT_RESET);
+ dsi_reg_wr(ctx, VID_MODE_CFG, FRAME_BTA_ACK_EN, 15, ctx->frame_ack_en);
+ dsi_reg_wr(ctx, DPI_VIDEO_FORMAT, DPI_VIDEO_MODE_FORMAT, 0, coding);
+ dsi_reg_wr(ctx, VID_MODE_CFG, VID_MODE_TYPE, 0, ctx->burst_mode);
+ byte_cycle = 95 * hline * ratio_x1000 / 100000;
+ dsi_reg_wr(ctx, VIDEO_SIG_DELAY_CONFIG, VIDEO_SIG_DELAY, 0, byte_cycle);
+ byte_cycle = hline * ratio_x1000 / 1000;
+ writel(byte_cycle, ctx->base + VIDEO_LINE_TIME);
+ byte_cycle = vm->hsync_len * ratio_x1000 / 1000;
+ dsi_reg_wr(ctx, VIDEO_LINE_HBLK_TIME, VIDEO_LINE_HSA_TIME, 16, byte_cycle);
+ byte_cycle = vm->hback_porch * ratio_x1000 / 1000;
+ dsi_reg_wr(ctx, VIDEO_LINE_HBLK_TIME, VIDEO_LINE_HBP_TIME, 0, byte_cycle);
+ writel(vm->vactive, ctx->base + VIDEO_VACTIVE_LINES);
+ dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VFP_LINES, 0, vm->vfront_porch);
+ dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VBP_LINES, 10, vm->vback_porch);
+ dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VSA_LINES, 20, vm->vsync_len);
+ dsi_reg_up(ctx, VID_MODE_CFG, LP_HBP_EN | LP_HFP_EN | LP_VACT_EN |
+ LP_VFP_EN | LP_VBP_EN | LP_VSA_EN, LP_HBP_EN | LP_HFP_EN |
+ LP_VACT_EN | LP_VFP_EN | LP_VBP_EN | LP_VSA_EN);
+
+ hs_to = (hline * vm->vactive) + (2 * Bpp_x100) / 100;
+ for (div = 0x80; (div < hs_to) && (div > 2); div--) {
+ if ((hs_to % div) == 0) {
+ writel(div, ctx->base + TIMEOUT_CNT_CLK_CONFIG);
+ writel(hs_to / div, ctx->base + LRX_H_TO_CONFIG);
+ writel(hs_to / div, ctx->base + HTX_TO_CONFIG);
+ break;
+ }
+ }
+
+ if (ctx->burst_mode == VIDEO_BURST_WITH_SYNC_PULSES) {
+ dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_PKT_SIZE, 0, video_size);
+ writel(0, ctx->base + VIDEO_NULLPKT_SIZE);
+ dsi_reg_up(ctx, VIDEO_PKT_CONFIG, VIDEO_LINE_CHUNK_NUM, 0);
+ } else {
+ /* non burst transmission */
+ null_pkt_size = 0;
+
+ /* bytes to be sent - first as one chunk */
+ bytes_per_chunk = vm->hactive * Bpp_x100 / 100 + pkt_header;
+
+ /* hline total bytes from the DPI interface */
+ total_bytes = (vm->hactive + vm->hfront_porch) *
+ ratio_x1000 / dsi->slave->lanes / 1000;
+
+ /* check if the pixels actually fit on the DSI link */
+ if (total_bytes < bytes_per_chunk) {
+ drm_err(dsi->drm, "current resolution can not be set\n");
+ return -EINVAL;
+ }
+
+ chunk_overhead = total_bytes - bytes_per_chunk;
+
+ /* overhead higher than 1 -> enable multi packets */
+ if (chunk_overhead > 1) {
+
+ /* multi packets */
+ for (video_size = video_size_step;
+ video_size < vm->hactive;
+ video_size += video_size_step) {
+
+ if (vm->hactive * 1000 / video_size % 1000)
+ continue;
+
+ chunks = vm->hactive / video_size;
+ bytes_per_chunk = Bpp_x100 * video_size / 100
+ + pkt_header;
+ if (total_bytes >= (bytes_per_chunk * chunks)) {
+ bytes_left = total_bytes -
+ bytes_per_chunk * chunks;
+ break;
+ }
+ }
+
+ /* prevent overflow (unsigned - unsigned) */
+ if (bytes_left > (pkt_header * chunks)) {
+ null_pkt_size = (bytes_left -
+ pkt_header * chunks) / chunks;
+ /* avoid register overflow */
+ if (null_pkt_size > 1023)
+ null_pkt_size = 1023;
+ }
+
+ } else {
+
+ /* single packet */
+ chunks = 1;
+
+ /* must be a multiple of 4 except 18 loosely */
+ for (video_size = vm->hactive;
+ (video_size % video_size_step) != 0;
+ video_size++)
+ ;
+ }
+
+ dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_PKT_SIZE, 0, video_size);
+ writel(null_pkt_size, ctx->base + VIDEO_NULLPKT_SIZE);
+ dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_LINE_CHUNK_NUM, 16, chunks);
+ }
+
+ writel(ctx->int0_mask, ctx->base + MASK_PROTOCOL_INT);
+ writel(ctx->int1_mask, ctx->base + MASK_INTERNAL_INT);
+ writel(1, ctx->base + SOFT_RESET);
+
+ return 0;
+}
+
+static void sprd_dsi_edpi_video(struct dsi_context *ctx)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ const u32 fifo_depth = 1096;
+ const u32 word_length = 4;
+ u32 hactive = ctx->vm.hactive;
+ u32 Bpp_x100;
+ u32 max_fifo_len;
+ u8 coding;
+
+ coding = fmt_to_coding(dsi->slave->format);
+ Bpp_x100 = calc_bytes_per_pixel_x100(coding);
+ max_fifo_len = word_length * fifo_depth * 100 / Bpp_x100;
+
+ writel(0, ctx->base + SOFT_RESET);
+ dsi_reg_wr(ctx, DPI_VIDEO_FORMAT, DPI_VIDEO_MODE_FORMAT, 0, coding);
+ dsi_reg_wr(ctx, CMD_MODE_CFG, TEAR_FX_EN, 0, ctx->te_ack_en);
+
+ if (max_fifo_len > hactive)
+ writel(hactive, ctx->base + DCS_WM_PKT_SIZE);
+ else
+ writel(max_fifo_len, ctx->base + DCS_WM_PKT_SIZE);
+
+ writel(ctx->int0_mask, ctx->base + MASK_PROTOCOL_INT);
+ writel(ctx->int1_mask, ctx->base + MASK_INTERNAL_INT);
+ writel(1, ctx->base + SOFT_RESET);
+}
+
+/*
+ * Send a packet on the generic interface,
+ * this function has an active delay to wait for the buffer to clear.
+ * The delay is limited to:
+ * (param_length / 4) x DSIH_FIFO_ACTIVE_WAIT x register access time
+ * the controller restricts the sending of.
+ *
+ * This function will not be able to send Null and Blanking packets due to
+ * controller restriction
+ */
+static int sprd_dsi_wr_pkt(struct dsi_context *ctx, u8 vc, u8 type,
+ const u8 *param, u16 len)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ u8 wc_lsbyte, wc_msbyte;
+ u32 payload;
+ int i, j, ret;
+
+ if (vc > 3)
+ return -EINVAL;
+
+
+ /* 1st: for long packet, must config payload first */
+ ret = dsi_wait_tx_payload_fifo_empty(ctx);
+ if (ret) {
+ drm_err(dsi->drm, "tx payload fifo is not empty\n");
+ return ret;
+ }
+
+ if (len > 2) {
+ for (i = 0, j = 0; i < len; i += j) {
+ payload = 0;
+ for (j = 0; (j < 4) && ((j + i) < (len)); j++)
+ payload |= param[i + j] << (j * 8);
+
+ writel(payload, ctx->base + GEN_PLD_DATA);
+ }
+ wc_lsbyte = len & 0xff;
+ wc_msbyte = len >> 8;
+ } else {
+ wc_lsbyte = (len > 0) ? param[0] : 0;
+ wc_msbyte = (len > 1) ? param[1] : 0;
+ }
+
+ /* 2nd: then set packet header */
+ ret = dsi_wait_tx_cmd_fifo_empty(ctx);
+ if (ret) {
+ drm_err(dsi->drm, "tx cmd fifo is not empty\n");
+ return ret;
+ }
+
+ writel(type | (vc << 6) | (wc_lsbyte << 8) | (wc_msbyte << 16),
+ ctx->base + GEN_HDR);
+
+ return 0;
+}
+
+/*
+ * Send READ packet to peripheral using the generic interface,
+ * this will force command mode and stop video mode (because of BTA).
+ *
+ * This function has an active delay to wait for the buffer to clear,
+ * the delay is limited to 2 x DSIH_FIFO_ACTIVE_WAIT
+ * (waiting for command buffer, and waiting for receiving)
+ * @note this function will enable BTA
+ */
+static int sprd_dsi_rd_pkt(struct dsi_context *ctx, u8 vc, u8 type,
+ u8 msb_byte, u8 lsb_byte,
+ u8 *buffer, u8 bytes_to_read)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ int i, ret;
+ int count = 0;
+ u32 temp;
+
+ if (vc > 3)
+ return -EINVAL;
+
+ /* 1st: send read command to peripheral */
+ ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_CMD_FIFO_EMPTY, 5);
+ if (!ret)
+ return -EIO;
+
+ writel(type | (vc << 6) | (lsb_byte << 8) | (msb_byte << 16),
+ ctx->base + GEN_HDR);
+
+ /* 2nd: wait peripheral response completed */
+ ret = dsi_wait_rd_resp_completed(ctx);
+ if (ret) {
+ drm_err(dsi->drm, "wait read response time out\n");
+ return ret;
+ }
+
+ /* 3rd: get data from rx payload fifo */
+ ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDATA_FIFO_EMPTY, 1);
+ if (ret) {
+ drm_err(dsi->drm, "rx payload fifo empty\n");
+ return -EIO;
+ }
+
+ for (i = 0; i < 100; i++) {
+ temp = readl(ctx->base + GEN_PLD_DATA);
+
+ if (count < bytes_to_read)
+ buffer[count++] = temp & 0xff;
+ if (count < bytes_to_read)
+ buffer[count++] = (temp >> 8) & 0xff;
+ if (count < bytes_to_read)
+ buffer[count++] = (temp >> 16) & 0xff;
+ if (count < bytes_to_read)
+ buffer[count++] = (temp >> 24) & 0xff;
+
+ ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDATA_FIFO_EMPTY, 1);
+ if (ret)
+ return count;
+ }
+
+ return 0;
+}
+
+static void sprd_dsi_set_work_mode(struct dsi_context *ctx, u8 mode)
+{
+ if (mode == DSI_MODE_CMD)
+ writel(1, ctx->base + DSI_MODE_CFG);
+ else
+ writel(0, ctx->base + DSI_MODE_CFG);
+}
+
+static void sprd_dsi_lp_cmd_enable(struct dsi_context *ctx)
+{
+ if (readl(ctx->base + DSI_MODE_CFG))
+ dsi_reg_up(ctx, CMD_MODE_CFG, GEN_SW_0P_TX | GEN_SW_1P_TX |
+ GEN_SW_2P_TX | GEN_SR_0P_TX | GEN_SR_1P_TX | GEN_SR_2P_TX |
+ GEN_LW_TX | DCS_SW_0P_TX | DCS_SW_1P_TX | DCS_SR_0P_TX |
+ DCS_LW_TX | MAX_RD_PKT_SIZE, GEN_SW_0P_TX | GEN_SW_1P_TX |
+ GEN_SW_2P_TX | GEN_SR_0P_TX | GEN_SR_1P_TX | GEN_SR_2P_TX |
+ GEN_LW_TX | DCS_SW_0P_TX | DCS_SW_1P_TX | DCS_SR_0P_TX |
+ DCS_LW_TX | MAX_RD_PKT_SIZE);
+ else
+ dsi_reg_up(ctx, VID_MODE_CFG, LP_CMD_EN, LP_CMD_EN);
+}
+
+static void sprd_dsi_state_reset(struct dsi_context *ctx)
+{
+ writel(0, ctx->base + SOFT_RESET);
+ udelay(100);
+ writel(1, ctx->base + SOFT_RESET);
+}
+
+static int sprd_dphy_init(struct dsi_context *ctx)
+{
+ struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
+ int ret;
+
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, 0);
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, 0);
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_CLK_EN, 0);
+
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, 0);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, PHY_TESTCLR);
+ dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, 0);
+
+ dphy_pll_config(ctx);
+ dphy_timing_config(ctx);
+
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, RF_PHY_SHUTDOWN);
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, RF_PHY_RESET_N);
+ writel(0x1C, ctx->base + PHY_MIN_STOP_TIME);
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_CLK_EN, RF_PHY_CLK_EN);
+ writel(dsi->slave->lanes - 1, ctx->base + PHY_LANE_NUM_CONFIG);
+
+ ret = dphy_wait_pll_locked(ctx);
+ if (ret) {
+ drm_err(dsi->drm, "dphy initial failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sprd_dphy_fini(struct dsi_context *ctx)
+{
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, 0);
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, 0);
+ dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, RF_PHY_RESET_N);
+}
+
+static void sprd_dsi_encoder_enable(struct drm_encoder *encoder)
+{
+ struct sprd_dsi *dsi = encoder_to_dsi(encoder);
+ struct sprd_dpu *dpu = to_sprd_crtc(encoder->crtc);
+ struct dsi_context *ctx = &dsi->ctx;
+
+ if (ctx->enabled) {
+ drm_warn(dsi->drm, "dsi is initialized\n");
+ return;
+ }
+
+ sprd_dsi_init(ctx);
+ if (ctx->work_mode == DSI_MODE_VIDEO)
+ sprd_dsi_dpi_video(ctx);
+ else
+ sprd_dsi_edpi_video(ctx);
+
+ sprd_dphy_init(ctx);
+
+ sprd_dsi_lp_cmd_enable(ctx);
+
+ if (dsi->panel) {
+ drm_panel_prepare(dsi->panel);
+ drm_panel_enable(dsi->panel);
+ }
+
+ sprd_dsi_set_work_mode(ctx, ctx->work_mode);
+ sprd_dsi_state_reset(ctx);
+
+ if (dsi->slave->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
+ dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, AUTO_CLKLANE_CTRL_EN,
+ AUTO_CLKLANE_CTRL_EN);
+ else {
+ dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, RF_PHY_CLK_EN, RF_PHY_CLK_EN);
+ dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, PHY_CLKLANE_TX_REQ_HS,
+ PHY_CLKLANE_TX_REQ_HS);
+ dphy_wait_pll_locked(ctx);
+ }
+
+ sprd_dpu_run(dpu);
+
+ ctx->enabled = true;
+}
+
+static void sprd_dsi_encoder_disable(struct drm_encoder *encoder)
+{
+ struct sprd_dsi *dsi = encoder_to_dsi(encoder);
+ struct sprd_dpu *dpu = to_sprd_crtc(encoder->crtc);
+ struct dsi_context *ctx = &dsi->ctx;
+
+ if (!ctx->enabled) {
+ drm_warn(dsi->drm, "dsi isn't initialized\n");
+ return;
+ }
+
+ sprd_dpu_stop(dpu);
+ sprd_dsi_set_work_mode(ctx, DSI_MODE_CMD);
+ sprd_dsi_lp_cmd_enable(ctx);
+
+ if (dsi->panel) {
+ drm_panel_disable(dsi->panel);
+ drm_panel_unprepare(dsi->panel);
+ }
+
+ sprd_dphy_fini(ctx);
+ sprd_dsi_fini(ctx);
+
+ ctx->enabled = false;
+}
+
+static void sprd_dsi_encoder_mode_set(struct drm_encoder *encoder,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adj_mode)
+{
+ struct sprd_dsi *dsi = encoder_to_dsi(encoder);
+
+ drm_dbg(dsi->drm, "%s() set mode: %s\n", __func__, dsi->mode->name);
+}
+
+static int sprd_dsi_encoder_atomic_check(struct drm_encoder *encoder,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state)
+{
+ return 0;
+}
+
+static const struct drm_encoder_helper_funcs sprd_encoder_helper_funcs = {
+ .atomic_check = sprd_dsi_encoder_atomic_check,
+ .mode_set = sprd_dsi_encoder_mode_set,
+ .enable = sprd_dsi_encoder_enable,
+ .disable = sprd_dsi_encoder_disable
+};
+
+static const struct drm_encoder_funcs sprd_encoder_funcs = {
+ .destroy = drm_encoder_cleanup,
+};
+
+static struct sprd_dsi *sprd_dsi_encoder_init(struct drm_device *drm,
+ struct device *dev)
+{
+ struct sprd_dsi *dsi;
+ u32 crtc_mask;
+
+ crtc_mask = drm_of_find_possible_crtcs(drm, dev->of_node);
+ if (!crtc_mask) {
+ drm_err(drm, "failed to find crtc mask\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ drm_dbg(drm, "find possible crtcs: 0x%08x\n", crtc_mask);
+
+ dsi = drmm_encoder_alloc(drm, struct sprd_dsi, encoder,
+ &sprd_encoder_funcs, DRM_MODE_ENCODER_DSI, NULL);
+ if (IS_ERR(dsi)) {
+ drm_err(drm, "failed to init dsi encoder.\n");
+ return dsi;
+ }
+
+ dsi->encoder.possible_crtcs = crtc_mask;
+ drm_encoder_helper_add(&dsi->encoder, &sprd_encoder_helper_funcs);
+
+ return dsi;
+}
+
+static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
+{
+ struct device *dev = dsi->host.dev;
+ struct device_node *child, *lcds_node;
+ struct drm_panel *panel;
+
+ /* search /lcds child node first */
+ lcds_node = of_find_node_by_path("/lcds");
+ for_each_child_of_node(lcds_node, child) {
+ panel = of_drm_find_panel(child);
+ if (!IS_ERR(panel)) {
+ dsi->panel = panel;
+ return 0;
+ }
+ }
+
+ /*
+ * If /lcds child node search failed, we search
+ * the child of dsi host node.
+ */
+ for_each_child_of_node(dev->of_node, child) {
+ panel = of_drm_find_panel(child);
+ if (!IS_ERR(panel)) {
+ dsi->panel = panel;
+ return 0;
+ }
+ }
+
+ drm_err(dsi->drm, "of_drm_find_panel() failed\n");
+ return -ENODEV;
+}
+
+static int sprd_dsi_host_attach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *slave)
+{
+ struct sprd_dsi *dsi = host_to_dsi(host);
+ struct dsi_context *ctx = &dsi->ctx;
+ int ret;
+
+ dsi->slave = slave;
+
+ if (slave->mode_flags & MIPI_DSI_MODE_VIDEO)
+ ctx->work_mode = DSI_MODE_VIDEO;
+ else
+ ctx->work_mode = DSI_MODE_CMD;
+
+ if (slave->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+ ctx->burst_mode = VIDEO_BURST_WITH_SYNC_PULSES;
+ else if (slave->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+ ctx->burst_mode = VIDEO_NON_BURST_WITH_SYNC_PULSES;
+ else
+ ctx->burst_mode = VIDEO_NON_BURST_WITH_SYNC_EVENTS;
+
+ ret = sprd_dsi_find_panel(dsi);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int sprd_dsi_host_detach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *slave)
+{
+ /* do nothing */
+ return 0;
+}
+
+static ssize_t sprd_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct sprd_dsi *dsi = host_to_dsi(host);
+ const u8 *tx_buf = msg->tx_buf;
+
+ if (msg->rx_buf && msg->rx_len) {
+ u8 lsb = (msg->tx_len > 0) ? tx_buf[0] : 0;
+ u8 msb = (msg->tx_len > 1) ? tx_buf[1] : 0;
+
+ return sprd_dsi_rd_pkt(&dsi->ctx, msg->channel, msg->type,
+ msb, lsb, msg->rx_buf, msg->rx_len);
+ }
+
+ if (msg->tx_buf && msg->tx_len)
+ return sprd_dsi_wr_pkt(&dsi->ctx, msg->channel, msg->type,
+ tx_buf, msg->tx_len);
+
+ return 0;
+}
+
+static const struct mipi_dsi_host_ops sprd_dsi_host_ops = {
+ .attach = sprd_dsi_host_attach,
+ .detach = sprd_dsi_host_detach,
+ .transfer = sprd_dsi_host_transfer,
+};
+
+static int sprd_dsi_host_init(struct sprd_dsi *dsi, struct device *dev)
+{
+ int ret;
+
+ dsi->host.dev = dev;
+ dsi->host.ops = &sprd_dsi_host_ops;
+
+ ret = mipi_dsi_host_register(&dsi->host);
+ if (ret)
+ drm_err(dsi->drm, "failed to register dsi host\n");
+
+ return ret;
+}
+
+static int sprd_dsi_connector_get_modes(struct drm_connector *connector)
+{
+ struct sprd_dsi *dsi = connector_to_dsi(connector);
+
+ return drm_panel_get_modes(dsi->panel, connector);
+}
+
+static enum drm_mode_status
+sprd_dsi_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct sprd_dsi *dsi = connector_to_dsi(connector);
+
+ drm_dbg(dsi->drm, "%s() mode: "DRM_MODE_FMT"\n", __func__, DRM_MODE_ARG(mode));
+
+ if (mode->type & DRM_MODE_TYPE_PREFERRED) {
+ dsi->mode = mode;
+ drm_display_mode_to_videomode(dsi->mode, &dsi->ctx.vm);
+ }
+
+ return MODE_OK;
+}
+
+static struct drm_encoder *
+sprd_dsi_connector_best_encoder(struct drm_connector *connector)
+{
+ struct sprd_dsi *dsi = connector_to_dsi(connector);
+
+ return &dsi->encoder;
+}
+
+static struct drm_connector_helper_funcs sprd_dsi_connector_helper_funcs = {
+ .get_modes = sprd_dsi_connector_get_modes,
+ .mode_valid = sprd_dsi_connector_mode_valid,
+ .best_encoder = sprd_dsi_connector_best_encoder,
+};
+
+static enum drm_connector_status
+sprd_dsi_connector_detect(struct drm_connector *connector, bool force)
+{
+ struct sprd_dsi *dsi = connector_to_dsi(connector);
+
+ if (dsi->panel) {
+ drm_panel_add(dsi->panel);
+ return connector_status_connected;
+ }
+
+ return connector_status_disconnected;
+}
+
+static void sprd_dsi_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_unregister(connector);
+ drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs sprd_dsi_atomic_connector_funcs = {
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = sprd_dsi_connector_detect,
+ .destroy = sprd_dsi_connector_destroy,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int sprd_dsi_connector_init(struct drm_device *drm, struct sprd_dsi *dsi)
+{
+ struct drm_encoder *encoder = &dsi->encoder;
+ struct drm_connector *connector = &dsi->connector;
+ int ret;
+
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+ ret = drm_connector_init(drm, connector,
+ &sprd_dsi_atomic_connector_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ if (ret) {
+ drm_err(drm, "drm_connector_init() failed\n");
+ return ret;
+ }
+
+ drm_connector_helper_add(connector,
+ &sprd_dsi_connector_helper_funcs);
+
+ drm_connector_attach_encoder(connector, encoder);
+
+ return 0;
+}
+
+static int sprd_dsi_context_init(struct sprd_dsi *dsi,
+ struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct dsi_context *ctx = &dsi->ctx;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctx->base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!ctx->base) {
+ drm_err(dsi->drm, "failed to map dsi host registers\n");
+ return -ENXIO;
+ }
+
+ ctx->pll = devm_kzalloc(dev, sizeof(*ctx->pll), GFP_KERNEL);
+ if (!ctx->pll)
+ return -ENOMEM;
+
+ ctx->regmap = devm_regmap_init(dev, &regmap_tst_io, dsi, &byte_config);
+ if (IS_ERR(ctx->regmap)) {
+ drm_err(dsi->drm, "dphy regmap init failed\n");
+ return PTR_ERR(ctx->regmap);
+ }
+
+ ctx->data_hs2lp = 120;
+ ctx->data_lp2hs = 500;
+ ctx->clk_hs2lp = 4;
+ ctx->clk_lp2hs = 15;
+ ctx->max_rd_time = 6000;
+ ctx->int0_mask = 0xffffffff;
+ ctx->int1_mask = 0xffffffff;
+ ctx->enabled = true;
+
+ return 0;
+}
+
+static int sprd_dsi_bind(struct device *dev, struct device *master, void *data)
+{
+ struct drm_device *drm = data;
+ struct sprd_dsi *dsi;
+ int ret;
+
+ dsi = sprd_dsi_encoder_init(drm, dev);
+ if (IS_ERR(dsi))
+ return PTR_ERR(dsi);
+
+ dsi->drm = drm;
+ dev_set_drvdata(dev, dsi);
+
+ ret = sprd_dsi_connector_init(drm, dsi);
+ if (ret)
+ return ret;
+
+ ret = sprd_dsi_context_init(dsi, dev);
+ if (ret)
+ return ret;
+
+ ret = sprd_dsi_host_init(dsi, dev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void sprd_dsi_unbind(struct device *dev,
+ struct device *master, void *data)
+{
+ struct sprd_dsi *dsi = dev_get_drvdata(dev);
+
+ mipi_dsi_host_unregister(&dsi->host);
+}
+
+static const struct component_ops dsi_component_ops = {
+ .bind = sprd_dsi_bind,
+ .unbind = sprd_dsi_unbind,
+};
+
+static const struct of_device_id dsi_match_table[] = {
+ { .compatible = "sprd,sharkl3-dsi-host" },
+ { /* sentinel */ },
+};
+
+static int sprd_dsi_probe(struct platform_device *pdev)
+{
+ return component_add(&pdev->dev, &dsi_component_ops);
+}
+
+static int sprd_dsi_remove(struct platform_device *pdev)
+{
+ component_del(&pdev->dev, &dsi_component_ops);
+
+ return 0;
+}
+
+struct platform_driver sprd_dsi_driver = {
+ .probe = sprd_dsi_probe,
+ .remove = sprd_dsi_remove,
+ .driver = {
+ .name = "sprd-dsi-drv",
+ .of_match_table = dsi_match_table,
+ },
+};
+
+MODULE_AUTHOR("Leon He <[email protected]>");
+MODULE_AUTHOR("Kevin Tang <[email protected]>");
+MODULE_DESCRIPTION("Unisoc MIPI DSI HOST Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/sprd/sprd_dsi.h b/drivers/gpu/drm/sprd/sprd_dsi.h
new file mode 100644
index 000000000..16628fb5c
--- /dev/null
+++ b/drivers/gpu/drm/sprd/sprd_dsi.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Unisoc Inc.
+ */
+
+#ifndef __SPRD_DSI_H__
+#define __SPRD_DSI_H__
+
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <video/videomode.h>
+
+#include <drm/drm_bridge.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_print.h>
+#include <drm/drm_panel.h>
+
+#include "megacores_pll.h"
+
+#define encoder_to_dsi(encoder) \
+ container_of(encoder, struct sprd_dsi, encoder)
+
+enum dsi_work_mode {
+ DSI_MODE_CMD = 0,
+ DSI_MODE_VIDEO
+};
+
+enum video_burst_mode {
+ VIDEO_NON_BURST_WITH_SYNC_PULSES = 0,
+ VIDEO_NON_BURST_WITH_SYNC_EVENTS,
+ VIDEO_BURST_WITH_SYNC_PULSES
+};
+
+enum dsi_color_coding {
+ COLOR_CODE_16BIT_CONFIG1 = 0,
+ COLOR_CODE_16BIT_CONFIG2,
+ COLOR_CODE_16BIT_CONFIG3,
+ COLOR_CODE_18BIT_CONFIG1,
+ COLOR_CODE_18BIT_CONFIG2,
+ COLOR_CODE_24BIT,
+ COLOR_CODE_20BIT_YCC422_LOOSELY,
+ COLOR_CODE_24BIT_YCC422,
+ COLOR_CODE_16BIT_YCC422,
+ COLOR_CODE_30BIT,
+ COLOR_CODE_36BIT,
+ COLOR_CODE_12BIT_YCC420,
+ COLOR_CODE_COMPRESSTION,
+ COLOR_CODE_MAX
+};
+
+struct dsi_context {
+ void __iomem *base;
+ struct regmap *regmap;
+ struct dphy_pll *pll;
+ struct videomode vm;
+ bool enabled;
+
+ u8 work_mode;
+ u8 burst_mode;
+
+ u32 int0_mask;
+ u32 int1_mask;
+
+ /* maximum time (ns) for data lanes from HS to LP */
+ u16 data_hs2lp;
+ /* maximum time (ns) for data lanes from LP to HS */
+ u16 data_lp2hs;
+ /* maximum time (ns) for clk lanes from HS to LP */
+ u16 clk_hs2lp;
+ /* maximum time (ns) for clk lanes from LP to HS */
+ u16 clk_lp2hs;
+ /* maximum time (ns) for BTA operation - REQUIRED */
+ u16 max_rd_time;
+ /* enable receiving frame ack packets - for video mode */
+ bool frame_ack_en;
+ /* enable receiving tear effect ack packets - for cmd mode */
+ bool te_ack_en;
+};
+
+struct sprd_dsi {
+ struct drm_device *drm;
+ struct mipi_dsi_host host;
+ struct mipi_dsi_device *slave;
+ struct drm_encoder encoder;
+ struct drm_connector connector;
+ struct drm_panel *panel;
+ struct drm_display_mode *mode;
+ struct dsi_context ctx;
+};
+
+#endif /* __SPRD_DSI_H__ */
--
2.29.0


2021-09-17 23:45:44

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

On Fri, Aug 13, 2021 at 10:53:02PM +0800, Kevin Tang wrote:
> Adds dsi host controller support for the Unisoc's display subsystem.
> Adds dsi phy support for the Unisoc's display subsystem.
> Only MIPI DSI Displays supported, DP/TV/HMDI will be support
> in the feature.
>
> v1:
> - Remove dphy and dsi graph binding, merge the dphy driver into the dsi.
>
> v2:
> - Use drm_xxx to replace all DRM_XXX.
> - Use kzalloc to replace devm_kzalloc for sprd_dsi structure init.
>
> v4:
> - Use drmm_helpers to allocate encoder.
> - Move allocate encoder and connector to bind function.
>
> v5:
> - Drop the dsi ip file prefix.
> - Fix the checkpatch warnings.
> - Add Signed-off-by for dsi&dphy patch.
> - Use the mode_flags of mipi_dsi_device to setup crtc DPI and EDPI mode.
>
> v6:
> - Redesign the way to access the dsi register.
> - Reduce the dsi_context member variables.
> ---
> drivers/gpu/drm/sprd/Kconfig | 1 +
> drivers/gpu/drm/sprd/Makefile | 4 +-
> drivers/gpu/drm/sprd/megacores_pll.c | 317 +++++++
> drivers/gpu/drm/sprd/megacores_pll.h | 146 +++
> drivers/gpu/drm/sprd/sprd_dpu.c | 17 +
> drivers/gpu/drm/sprd/sprd_drm.c | 1 +
> drivers/gpu/drm/sprd/sprd_drm.h | 1 +
> drivers/gpu/drm/sprd/sprd_dsi.c | 1260 ++++++++++++++++++++++++++
> drivers/gpu/drm/sprd/sprd_dsi.h | 94 ++
> 9 files changed, 1840 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/sprd/megacores_pll.c
> create mode 100644 drivers/gpu/drm/sprd/megacores_pll.h
> create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c
> create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h
>
> diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig
> index 37762c333..3edeaeca0 100644
> --- a/drivers/gpu/drm/sprd/Kconfig
> +++ b/drivers/gpu/drm/sprd/Kconfig
> @@ -5,6 +5,7 @@ config DRM_SPRD
> select DRM_GEM_CMA_HELPER
> select DRM_KMS_CMA_HELPER
> select DRM_KMS_HELPER
> + select DRM_MIPI_DSI
> select VIDEOMODE_HELPERS
> help
> Choose this option if you have a Unisoc chipset.
> diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile
> index ab12b95e6..73f96c459 100644
> --- a/drivers/gpu/drm/sprd/Makefile
> +++ b/drivers/gpu/drm/sprd/Makefile
> @@ -1,4 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
>
> obj-y := sprd_drm.o \
> - sprd_dpu.o
> + sprd_dpu.o \
> + sprd_dsi.o \
> + megacores_pll.o
> diff --git a/drivers/gpu/drm/sprd/megacores_pll.c b/drivers/gpu/drm/sprd/megacores_pll.c
> new file mode 100644
> index 000000000..0dfd3c372
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/megacores_pll.c
> @@ -0,0 +1,317 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Unisoc Inc.
> + */
> +
> +#include <asm/div64.h>
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/regmap.h>
> +#include <linux/string.h>
> +
> +#include "megacores_pll.h"
> +
> +#define L 0
> +#define H 1
> +#define CLK 0
> +#define DATA 1
> +#define INFINITY 0xffffffff
> +#define MIN_OUTPUT_FREQ (100)
> +
> +#define AVERAGE(a, b) (min(a, b) + abs((b) - (a)) / 2)
> +
> +/* sharkle */
> +#define VCO_BAND_LOW 750
> +#define VCO_BAND_MID 1100
> +#define VCO_BAND_HIGH 1500
> +#define PHY_REF_CLK 26000
> +
> +static int dphy_calc_pll_param(struct dphy_pll *pll)
> +{
> + const u32 khz = 1000;
> + const u32 mhz = 1000000;
> + const unsigned long long factor = 100;
> + unsigned long long tmp;
> + int i;
> +
> + pll->potential_fvco = pll->freq / khz;
> + pll->ref_clk = PHY_REF_CLK / khz;
> +
> + for (i = 0; i < 4; ++i) {
> + if (pll->potential_fvco >= VCO_BAND_LOW &&
> + pll->potential_fvco <= VCO_BAND_HIGH) {
> + pll->fvco = pll->potential_fvco;
> + pll->out_sel = BIT(i);
> + break;
> + }
> + pll->potential_fvco <<= 1;
> + }
> + if (pll->fvco == 0)
> + return -EINVAL;
> +
> + if (pll->fvco >= VCO_BAND_LOW && pll->fvco <= VCO_BAND_MID) {
> + /* vco band control */
> + pll->vco_band = 0x0;
> + /* low pass filter control */
> + pll->lpf_sel = 1;
> + } else if (pll->fvco > VCO_BAND_MID && pll->fvco <= VCO_BAND_HIGH) {
> + pll->vco_band = 0x1;
> + pll->lpf_sel = 0;
> + } else
> + return -EINVAL;

This doesn't follow the kernel coding style, make sure all the issues
with checkpatch.pl --strict are fixed.

> +
> + pll->nint = pll->fvco / pll->ref_clk;
> + tmp = pll->fvco * factor * mhz;
> + do_div(tmp, pll->ref_clk);
> + tmp = tmp - pll->nint * factor * mhz;
> + tmp *= BIT(20);
> + do_div(tmp, 100000000);
> + pll->kint = (u32)tmp;
> + pll->refin = 3; /* pre-divider bypass */
> + pll->sdm_en = true; /* use fraction N PLL */
> + pll->fdk_s = 0x1; /* fraction */
> + pll->cp_s = 0x0;
> + pll->det_delay = 0x1;
> +
> + return 0;
> +}
> +
> +static void dphy_set_pll_reg(struct dphy_pll *pll, struct regmap *regmap)
> +{
> + struct pll_reg *reg = &pll->reg;
> + u8 *val;
> + int i;
> +
> + u8 reg_addr[] = {
> + 0x03, 0x04, 0x06, 0x08, 0x09,
> + 0x0a, 0x0b, 0x0e, 0x0f
> + };
> +
> + reg->_03.bits.prbs_bist = 1;
> + reg->_03.bits.en_lp_treot = true;
> + reg->_03.bits.lpf_sel = pll->lpf_sel;
> + reg->_03.bits.txfifo_bypass = 0;
> + reg->_04.bits.div = pll->div;
> + reg->_04.bits.masterof8lane = 1;
> + reg->_04.bits.cp_s = pll->cp_s;
> + reg->_04.bits.fdk_s = pll->fdk_s;
> + reg->_06.bits.nint = pll->nint;
> + reg->_08.bits.vco_band = pll->vco_band;
> + reg->_08.bits.sdm_en = pll->sdm_en;
> + reg->_08.bits.refin = pll->refin;
> + reg->_09.bits.kint_h = pll->kint >> 12;
> + reg->_0a.bits.kint_m = (pll->kint >> 4) & 0xff;
> + reg->_0b.bits.out_sel = pll->out_sel;
> + reg->_0b.bits.kint_l = pll->kint & 0xf;
> + reg->_0e.bits.pll_pu_byp = 0;
> + reg->_0e.bits.pll_pu = 0;
> + reg->_0e.bits.stopstate_sel = 1;
> + reg->_0f.bits.det_delay = pll->det_delay;
> +
> + val = (u8 *)&reg;
> +
> + for (i = 0; i < sizeof(reg_addr); ++i) {
> + regmap_write(regmap, reg_addr[i], val[i]);
> + DRM_DEBUG("%02x: %02x\n", reg_addr[i], val[i]);
> + }
> +}

It would be great to also convert this part to a pattern without
structures.

> +
> +int dphy_pll_config(struct dsi_context *ctx)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + struct regmap *regmap = ctx->regmap;
> + struct dphy_pll *pll = ctx->pll;
> + int ret;
> +
> + pll->freq = dsi->slave->hs_rate;
> +
> + /* FREQ = 26M * (NINT + KINT / 2^20) / out_sel */
> + ret = dphy_calc_pll_param(pll);
> + if (ret) {
> + drm_err(dsi->drm, "failed to calculate dphy pll parameters\n");
> + return ret;
> + }
> + dphy_set_pll_reg(pll, regmap);
> +
> + return 0;
> +}
> +
> +static void dphy_set_timing_reg(struct regmap *regmap, int type, u8 val[])
> +{
> + switch (type) {
> + case REQUEST_TIME:
> + regmap_write(regmap, 0x31, val[CLK]);
> + regmap_write(regmap, 0x41, val[DATA]);
> + regmap_write(regmap, 0x51, val[DATA]);
> + regmap_write(regmap, 0x61, val[DATA]);
> + regmap_write(regmap, 0x71, val[DATA]);
> +
> + regmap_write(regmap, 0x90, val[CLK]);
> + regmap_write(regmap, 0xa0, val[DATA]);
> + regmap_write(regmap, 0xb0, val[DATA]);
> + regmap_write(regmap, 0xc0, val[DATA]);
> + regmap_write(regmap, 0xd0, val[DATA]);
> + break;

defines and macros would help the readability here

> + case PREPARE_TIME:
> + regmap_write(regmap, 0x32, val[CLK]);
> + regmap_write(regmap, 0x42, val[DATA]);
> + regmap_write(regmap, 0x52, val[DATA]);
> + regmap_write(regmap, 0x62, val[DATA]);
> + regmap_write(regmap, 0x72, val[DATA]);
> +
> + regmap_write(regmap, 0x91, val[CLK]);
> + regmap_write(regmap, 0xa1, val[DATA]);
> + regmap_write(regmap, 0xb1, val[DATA]);
> + regmap_write(regmap, 0xc1, val[DATA]);
> + regmap_write(regmap, 0xd1, val[DATA]);
> + break;
> + case ZERO_TIME:
> + regmap_write(regmap, 0x33, val[CLK]);
> + regmap_write(regmap, 0x43, val[DATA]);
> + regmap_write(regmap, 0x53, val[DATA]);
> + regmap_write(regmap, 0x63, val[DATA]);
> + regmap_write(regmap, 0x73, val[DATA]);
> +
> + regmap_write(regmap, 0x92, val[CLK]);
> + regmap_write(regmap, 0xa2, val[DATA]);
> + regmap_write(regmap, 0xb2, val[DATA]);
> + regmap_write(regmap, 0xc2, val[DATA]);
> + regmap_write(regmap, 0xd2, val[DATA]);
> + break;
> + case TRAIL_TIME:
> + regmap_write(regmap, 0x34, val[CLK]);
> + regmap_write(regmap, 0x44, val[DATA]);
> + regmap_write(regmap, 0x54, val[DATA]);
> + regmap_write(regmap, 0x64, val[DATA]);
> + regmap_write(regmap, 0x74, val[DATA]);
> +
> + regmap_write(regmap, 0x93, val[CLK]);
> + regmap_write(regmap, 0xa3, val[DATA]);
> + regmap_write(regmap, 0xb3, val[DATA]);
> + regmap_write(regmap, 0xc3, val[DATA]);
> + regmap_write(regmap, 0xd3, val[DATA]);
> + break;
> + case EXIT_TIME:
> + regmap_write(regmap, 0x36, val[CLK]);
> + regmap_write(regmap, 0x46, val[DATA]);
> + regmap_write(regmap, 0x56, val[DATA]);
> + regmap_write(regmap, 0x66, val[DATA]);
> + regmap_write(regmap, 0x76, val[DATA]);
> +
> + regmap_write(regmap, 0x95, val[CLK]);
> + regmap_write(regmap, 0xA5, val[DATA]);
> + regmap_write(regmap, 0xB5, val[DATA]);
> + regmap_write(regmap, 0xc5, val[DATA]);
> + regmap_write(regmap, 0xd5, val[DATA]);
> + break;
> + case CLKPOST_TIME:
> + regmap_write(regmap, 0x35, val[CLK]);
> + regmap_write(regmap, 0x94, val[CLK]);
> + break;
> +
> + /* the following just use default value */
> + case SETTLE_TIME:
> + case TA_GET:
> + case TA_GO:
> + case TA_SURE:
> + break;

you need to use fallthrough; for all those cases

> + default:
> + break;
> + }
> +}
> +
> +void dphy_timing_config(struct dsi_context *ctx)
> +{
> + struct regmap *regmap = ctx->regmap;
> + struct dphy_pll *pll = ctx->pll;
> + const u32 factor = 2;
> + const u32 scale = 100;
> + u32 t_ui, t_byteck, t_half_byteck;
> + u32 range[2], constant;
> + u8 val[2];
> + u32 tmp = 0;
> +
> + /* t_ui: 1 ui, byteck: 8 ui, half byteck: 4 ui */
> + t_ui = 1000 * scale / (pll->freq / 1000);
> + t_byteck = t_ui << 3;
> + t_half_byteck = t_ui << 2;
> + constant = t_ui << 1;
> +
> + /* REQUEST_TIME: HS T-LPX: LP-01
> + * For T-LPX, mipi spec defined min value is 50ns,
> + * but maybe it shouldn't be too small, because BTA,
> + * LP-10, LP-00, LP-01, all of this is related to T-LPX.
> + */
> + range[L] = 50 * scale;
> + range[H] = INFINITY;
> + val[CLK] = DIV_ROUND_UP(range[L] * (factor << 1), t_byteck) - 2;
> + val[DATA] = val[CLK];
> + dphy_set_timing_reg(regmap, REQUEST_TIME, val);
> +
> + /* PREPARE_TIME: HS sequence: LP-00 */
> + range[L] = 38 * scale;
> + range[H] = 95 * scale;
> + tmp = AVERAGE(range[L], range[H]);
> + val[CLK] = DIV_ROUND_UP(AVERAGE(range[L], range[H]),
> + t_half_byteck) - 1;
> + range[L] = 40 * scale + 4 * t_ui;
> + range[H] = 85 * scale + 6 * t_ui;
> + tmp |= AVERAGE(range[L], range[H]) << 16;
> + val[DATA] = DIV_ROUND_UP(AVERAGE(range[L], range[H]),
> + t_half_byteck) - 1;
> + dphy_set_timing_reg(regmap, PREPARE_TIME, val);
> +
> + /* ZERO_TIME: HS-ZERO */
> + range[L] = 300 * scale;
> + range[H] = INFINITY;
> + val[CLK] = DIV_ROUND_UP(range[L] * factor + (tmp & 0xffff)
> + - 525 * t_byteck / 100, t_byteck) - 2;
> + range[L] = 145 * scale + 10 * t_ui;
> + val[DATA] = DIV_ROUND_UP(range[L] * factor
> + + ((tmp >> 16) & 0xffff) - 525 * t_byteck / 100,
> + t_byteck) - 2;
> + dphy_set_timing_reg(regmap, ZERO_TIME, val);
> +
> + /* TRAIL_TIME: HS-TRAIL */
> + range[L] = 60 * scale;
> + range[H] = INFINITY;
> + val[CLK] = DIV_ROUND_UP(range[L] * factor - constant, t_half_byteck);
> + range[L] = max(8 * t_ui, 60 * scale + 4 * t_ui);
> + val[DATA] = DIV_ROUND_UP(range[L] * 3 / 2 - constant, t_half_byteck) - 2;
> + dphy_set_timing_reg(regmap, TRAIL_TIME, val);
> +
> + /* EXIT_TIME: */
> + range[L] = 100 * scale;
> + range[H] = INFINITY;
> + val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2;
> + val[DATA] = val[CLK];
> + dphy_set_timing_reg(regmap, EXIT_TIME, val);
> +
> + /* CLKPOST_TIME: */
> + range[L] = 60 * scale + 52 * t_ui;
> + range[H] = INFINITY;
> + val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2;
> + val[DATA] = val[CLK];
> + dphy_set_timing_reg(regmap, CLKPOST_TIME, val);
> +
> + /* SETTLE_TIME:
> + * This time is used for receiver. So for transmitter,
> + * it can be ignored.
> + */
> +
> + /* TA_GO:
> + * transmitter drives bridge state(LP-00) before releasing control,
> + * reg 0x1f default value: 0x04, which is good.
> + */
> +
> + /* TA_SURE:
> + * After LP-10 state and before bridge state(LP-00),
> + * reg 0x20 default value: 0x01, which is good.
> + */
> +
> + /* TA_GET:
> + * receiver drives Bridge state(LP-00) before releasing control
> + * reg 0x21 default value: 0x03, which is good.
> + */
> +}
> diff --git a/drivers/gpu/drm/sprd/megacores_pll.h b/drivers/gpu/drm/sprd/megacores_pll.h
> new file mode 100644
> index 000000000..bf20aae65
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/megacores_pll.h
> @@ -0,0 +1,146 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2020 Unisoc Inc.
> + */
> +
> +#ifndef _MEGACORES_PLL_H_
> +#define _MEGACORES_PLL_H_
> +
> +#include "sprd_dsi.h"
> +
> +enum PLL_TIMING {
> + NONE,
> + REQUEST_TIME,
> + PREPARE_TIME,
> + SETTLE_TIME,
> + ZERO_TIME,
> + TRAIL_TIME,
> + EXIT_TIME,
> + CLKPOST_TIME,
> + TA_GET,
> + TA_GO,
> + TA_SURE,
> + TA_WAIT,
> +};
> +
> +struct pll_reg {
> + union __reg_03__ {
> + struct __03 {
> + u8 prbs_bist: 1;
> + u8 en_lp_treot: 1;
> + u8 lpf_sel: 4;
> + u8 txfifo_bypass: 1;
> + u8 freq_hopping: 1;
> + } bits;
> + u8 val;
> + } _03;
> + union __reg_04__ {
> + struct __04 {
> + u8 div: 3;
> + u8 masterof8lane: 1;
> + u8 hop_trig: 1;
> + u8 cp_s: 2;
> + u8 fdk_s: 1;
> + } bits;
> + u8 val;
> + } _04;
> + union __reg_06__ {
> + struct __06 {
> + u8 nint: 7;
> + u8 mod_en: 1;
> + } bits;
> + u8 val;
> + } _06;
> + union __reg_07__ {
> + struct __07 {
> + u8 kdelta_h: 8;
> + } bits;
> + u8 val;
> + } _07;
> + union __reg_08__ {
> + struct __08 {
> + u8 vco_band: 1;
> + u8 sdm_en: 1;
> + u8 refin: 2;
> + u8 kdelta_l: 4;
> + } bits;
> + u8 val;
> + } _08;
> + union __reg_09__ {
> + struct __09 {
> + u8 kint_h: 8;
> + } bits;
> + u8 val;
> + } _09;
> + union __reg_0a__ {
> + struct __0a {
> + u8 kint_m: 8;
> + } bits;
> + u8 val;
> + } _0a;
> + union __reg_0b__ {
> + struct __0b {
> + u8 out_sel: 4;
> + u8 kint_l: 4;
> + } bits;
> + u8 val;
> + } _0b;
> + union __reg_0c__ {
> + struct __0c {
> + u8 kstep_h: 8;
> + } bits;
> + u8 val;
> + } _0c;
> + union __reg_0d__ {
> + struct __0d {
> + u8 kstep_m: 8;
> + } bits;
> + u8 val;
> + } _0d;
> + union __reg_0e__ {
> + struct __0e {
> + u8 pll_pu_byp: 1;
> + u8 pll_pu: 1;
> + u8 hsbist_len: 2;
> + u8 stopstate_sel: 1;
> + u8 kstep_l: 3;
> + } bits;
> + u8 val;
> + } _0e;
> + union __reg_0f__ {
> + struct __0f {
> + u8 det_delay:2;
> + u8 kdelta: 4;
> + u8 ldo0p4:2;
> + } bits;
> + u8 val;
> + } _0f;
> +};
> +
> +struct dphy_pll {
> + u8 refin; /* Pre-divider control signal */
> + u8 cp_s; /* 00: SDM_EN=1, 10: SDM_EN=0 */
> + u8 fdk_s; /* PLL mode control: integer or fraction */
> + u8 sdm_en;
> + u8 div;
> + u8 int_n; /* integer N PLL */
> + u32 ref_clk; /* dphy reference clock, unit: MHz */
> + u32 freq; /* panel config, unit: KHz */
> + u32 fvco;
> + u32 potential_fvco;
> + u32 nint; /* sigma delta modulator NINT control */
> + u32 kint; /* sigma delta modulator KINT control */
> + u8 lpf_sel; /* low pass filter control */
> + u8 out_sel; /* post divider control */
> + u8 vco_band; /* vco range */
> + u8 det_delay;
> +
> + struct pll_reg reg;
> +};
> +
> +struct dsi_context;
> +
> +int dphy_pll_config(struct dsi_context *ctx);
> +void dphy_timing_config(struct dsi_context *ctx);
> +
> +#endif /* _MEGACORES_PLL_H_ */
> diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c
> index 448dd4fb6..4e3b30abe 100644
> --- a/drivers/gpu/drm/sprd/sprd_dpu.c
> +++ b/drivers/gpu/drm/sprd/sprd_dpu.c
> @@ -25,6 +25,7 @@
>
> #include "sprd_drm.h"
> #include "sprd_dpu.h"
> +#include "sprd_dsi.h"
>
> /* Global control registers */
> #define REG_DPU_CTRL 0x04
> @@ -686,9 +687,25 @@ static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc)
> {
> struct sprd_dpu *dpu = to_sprd_crtc(crtc);
> struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> + struct drm_encoder *encoder;
> + struct mipi_dsi_device *slave;
> + struct sprd_dsi *dsi;
>
> drm_display_mode_to_videomode(mode, &dpu->ctx.vm);
>
> + drm_for_each_encoder(encoder, crtc->dev) {
> + if (encoder->crtc != crtc)
> + continue;
> +
> + dsi = encoder_to_dsi(encoder);
> + slave = dsi->slave;
> +
> + if (slave->mode_flags & MIPI_DSI_MODE_VIDEO)
> + dpu->ctx.if_type = SPRD_DPU_IF_DPI;
> + else
> + dpu->ctx.if_type = SPRD_DPU_IF_EDPI;
> + }
> +

You're not using if_type anywhere

> sprd_dpi_init(dpu);
> }
>
> diff --git a/drivers/gpu/drm/sprd/sprd_drm.c b/drivers/gpu/drm/sprd/sprd_drm.c
> index 549b71278..68cf0933c 100644
> --- a/drivers/gpu/drm/sprd/sprd_drm.c
> +++ b/drivers/gpu/drm/sprd/sprd_drm.c
> @@ -183,6 +183,7 @@ static struct platform_driver sprd_drm_driver = {
> static struct platform_driver *sprd_drm_drivers[] = {
> &sprd_drm_driver,
> &sprd_dpu_driver,
> + &sprd_dsi_driver,
> };
>
> static int __init sprd_drm_init(void)
> diff --git a/drivers/gpu/drm/sprd/sprd_drm.h b/drivers/gpu/drm/sprd/sprd_drm.h
> index 85d4a8b9f..95d1b972f 100644
> --- a/drivers/gpu/drm/sprd/sprd_drm.h
> +++ b/drivers/gpu/drm/sprd/sprd_drm.h
> @@ -14,5 +14,6 @@ struct sprd_drm {
> };
>
> extern struct platform_driver sprd_dpu_driver;
> +extern struct platform_driver sprd_dsi_driver;
>
> #endif /* _SPRD_DRM_H_ */
> diff --git a/drivers/gpu/drm/sprd/sprd_dsi.c b/drivers/gpu/drm/sprd/sprd_dsi.c
> new file mode 100644
> index 000000000..5ce98fe90
> --- /dev/null
> +++ b/drivers/gpu/drm/sprd/sprd_dsi.c
> @@ -0,0 +1,1260 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Unisoc Inc.
> + */
> +
> +#include <linux/component.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_graph.h>
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_probe_helper.h>
> +
> +#include "sprd_drm.h"
> +#include "sprd_dpu.h"
> +#include "sprd_dsi.h"
> +
> +#define SOFT_RESET 0x04
> +#define MASK_PROTOCOL_INT 0x0C
> +#define MASK_INTERNAL_INT 0x14
> +#define DSI_MODE_CFG 0x18
> +
> +#define VIRTUAL_CHANNEL_ID 0x1C
> +#define GEN_RX_VCID GENMASK(1, 0)
> +#define VIDEO_PKT_VCID GENMASK(3, 2)
> +
> +#define DPI_VIDEO_FORMAT 0x20
> +#define DPI_VIDEO_MODE_FORMAT GENMASK(5, 0)
> +#define LOOSELY18_EN BIT(6)
> +
> +#define VIDEO_PKT_CONFIG 0x24
> +#define VIDEO_PKT_SIZE GENMASK(15, 0)
> +#define VIDEO_LINE_CHUNK_NUM GENMASK(31, 16)
> +
> +#define VIDEO_LINE_HBLK_TIME 0x28
> +#define VIDEO_LINE_HBP_TIME GENMASK(15, 0)
> +#define VIDEO_LINE_HSA_TIME GENMASK(31, 16)
> +
> +#define VIDEO_LINE_TIME 0x2C
> +
> +#define VIDEO_VBLK_LINES 0x30
> +#define VFP_LINES GENMASK(9, 0)
> +#define VBP_LINES GENMASK(19, 10)
> +#define VSA_LINES GENMASK(29, 20)
> +
> +#define VIDEO_VACTIVE_LINES 0x34
> +
> +#define VID_MODE_CFG 0x38
> +#define VID_MODE_TYPE GENMASK(1, 0)
> +#define LP_VSA_EN BIT(8)
> +#define LP_VBP_EN BIT(9)
> +#define LP_VFP_EN BIT(10)
> +#define LP_VACT_EN BIT(11)
> +#define LP_HBP_EN BIT(12)
> +#define LP_HFP_EN BIT(13)
> +#define FRAME_BTA_ACK_EN BIT(14)
> +#define LP_CMD_EN BIT(15)
> +
> +#define TIMEOUT_CNT_CLK_CONFIG 0x40
> +#define HTX_TO_CONFIG 0x44
> +#define LRX_H_TO_CONFIG 0x48
> +
> +#define TX_ESC_CLK_CONFIG 0x5C
> +
> +#define CMD_MODE_CFG 0x68
> +#define TEAR_FX_EN BIT(0)
> +#define ACK_RQST_EN BIT(1)
> +#define PPS_TX BIT(5)
> +#define EXQ_TX BIT(6)
> +#define CMC_TX BIT(7)
> +#define GEN_SW_0P_TX BIT(8)
> +#define GEN_SW_1P_TX BIT(9)
> +#define GEN_SW_2P_TX BIT(10)
> +#define GEN_SR_0P_TX BIT(11)
> +#define GEN_SR_1P_TX BIT(12)
> +#define GEN_SR_2P_TX BIT(13)
> +#define GEN_LW_TX BIT(14)
> +#define DCS_SW_0P_TX BIT(16)
> +#define DCS_SW_1P_TX BIT(17)
> +#define DCS_SR_0P_TX BIT(18)
> +#define DCS_LW_TX BIT(19)
> +#define MAX_RD_PKT_SIZE BIT(24)
> +
> +#define GEN_HDR 0x6C
> +#define GEN_DT GENMASK(5, 0)
> +#define GEN_VC GENMASK(7, 6)
> +#define GEN_WC_LSBYTE GENMASK(15, 8)
> +#define GEN_WC_MSBYTE GENMASK(23, 16)
> +
> +#define GEN_PLD_DATA 0x70
> +#define GEN_PLD_B1 GENMASK(7, 0)
> +#define GEN_PLD_B2 GENMASK(15, 8)
> +#define GEN_PLD_B3 GENMASK(23, 16)
> +#define GEN_PLD_B4 GENMASK(31, 24)
> +
> +#define PHY_CLK_LANE_LP_CTRL 0x74
> +#define PHY_CLKLANE_TX_REQ_HS BIT(0)
> +#define AUTO_CLKLANE_CTRL_EN BIT(1)
> +
> +#define PHY_INTERFACE_CTRL 0x78
> +#define RF_PHY_SHUTDOWN BIT(0)
> +#define RF_PHY_RESET_N BIT(1)
> +#define RF_PHY_CLK_EN BIT(2)
> +
> +#define CMD_MODE_STATUS 0x98
> +#define GEN_CMD_RDCMD_ONGOING BIT(0)
> +#define GEN_CMD_RDATA_FIFO_EMPTY BIT(1)
> +#define GEN_CMD_RDATA_FIFO_FULL BIT(2)
> +#define GEN_CMD_WDATA_FIFO_EMPTY BIT(3)
> +#define GEN_CMD_WDATA_FIFO_FULL BIT(4)
> +#define GEN_CMD_CMD_FIFO_EMPTY BIT(5)
> +#define GEN_CMD_CMD_FIFO_FULL BIT(6)
> +#define GEN_CMD_RDCMD_DONE BIT(7)
> +
> +#define PHY_STATUS 0x9C
> +#define PHY_LOCK BIT(1)
> +
> +#define PHY_MIN_STOP_TIME 0xA0
> +#define PHY_LANE_NUM_CONFIG 0xA4
> +
> +#define PHY_CLKLANE_TIME_CONFIG 0xA8
> +#define PHY_CLKLANE_LP_TO_HS_TIME GENMASK(15, 0)
> +#define PHY_CLKLANE_HS_TO_LP_TIME GENMASK(31, 16)
> +
> +#define PHY_DATALANE_TIME_CONFIG 0xAC
> +#define PHY_DATALANE_LP_TO_HS_TIME GENMASK(15, 0)
> +#define PHY_DATALANE_HS_TO_LP_TIME GENMASK(31, 16)
> +
> +#define MAX_READ_TIME 0xB0
> +
> +#define RX_PKT_CHECK_CONFIG 0xB4
> +#define RX_PKT_ECC_EN BIT(0)
> +#define RX_PKT_CRC_EN BIT(1)
> +
> +#define TA_EN 0xB8
> +
> +#define EOTP_EN 0xBC
> +#define TX_EOTP_EN BIT(0)
> +#define RX_EOTP_EN BIT(1)
> +
> +#define VIDEO_NULLPKT_SIZE 0xC0
> +#define DCS_WM_PKT_SIZE 0xC4
> +#define PROTOCOL_INT_CLR 0xC8
> +#define INTERNAL_INT_CLR 0xCC
> +
> +#define VIDEO_SIG_DELAY_CONFIG 0xD0
> +#define VIDEO_SIG_DELAY GENMASK(23, 0)
> +#define VIDEO_SIG_DELAY_MODE BIT(24)
> +
> +#define PHY_TST_CTRL0 0xF0
> +#define PHY_TESTCLR BIT(0)
> +#define PHY_TESTCLK BIT(1)
> +
> +#define PHY_TST_CTRL1 0xF4
> +#define PHY_TESTDIN GENMASK(7, 0)
> +#define PHY_TESTDOUT GENMASK(15, 8)
> +#define PHY_TESTEN BIT(16)
> +
> +#define host_to_dsi(host) \
> + container_of(host, struct sprd_dsi, host)
> +#define connector_to_dsi(connector) \
> + container_of(connector, struct sprd_dsi, connector)
> +
> +static inline u32
> +dsi_reg_rd(struct dsi_context *ctx, u32 offset, u32 mask,
> + u32 shift)
> +{
> + return (readl(ctx->base + offset) & mask) >> shift;
> +}
> +
> +static inline void
> +dsi_reg_wr(struct dsi_context *ctx, u32 offset, u32 mask,
> + u32 shift, u32 val)
> +{
> + u32 ret;
> +
> + ret = readl(ctx->base + offset);
> + ret &= ~mask;
> + ret |= (val << shift) & mask;
> + writel(ret, ctx->base + offset);
> +}
> +
> +static inline void
> +dsi_reg_up(struct dsi_context *ctx, u32 offset, u32 mask,
> + u32 val)
> +{
> + u32 ret = readl(ctx->base + offset);
> +
> + writel((ret & ~mask) | (val & mask), ctx->base + offset);
> +}
> +
> +static int regmap_tst_io_write(void *context, u32 reg, u32 val)
> +{
> + struct sprd_dsi *dsi = context;
> + struct dsi_context *ctx = &dsi->ctx;
> +
> + if (val > 0xff || reg > 0xff)
> + return -EINVAL;
> +
> + drm_dbg(dsi->drm, "reg = 0x%02x, val = 0x%02x\n", reg, val);
> +
> + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, PHY_TESTEN);
> + dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, reg);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
> + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, 0);
> + dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, val);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
> +
> + return 0;
> +}
> +
> +static int regmap_tst_io_read(void *context, u32 reg, u32 *val)
> +{
> + struct sprd_dsi *dsi = context;
> + struct dsi_context *ctx = &dsi->ctx;
> + int ret;
> +
> + if (reg > 0xff)
> + return -EINVAL;
> +
> + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, PHY_TESTEN);
> + dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, reg);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
> + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, 0);
> +
> + udelay(1);
> +
> + ret = dsi_reg_rd(ctx, PHY_TST_CTRL1, PHY_TESTDOUT, 8);
> + if (ret < 0)
> + return ret;
> +
> + *val = ret;
> +
> + drm_dbg(dsi->drm, "reg = 0x%02x, val = 0x%02x\n", reg, *val);
> + return 0;
> +}
> +
> +static struct regmap_bus regmap_tst_io = {
> + .reg_write = regmap_tst_io_write,
> + .reg_read = regmap_tst_io_read,
> +};
> +
> +static const struct regmap_config byte_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static int dphy_wait_pll_locked(struct dsi_context *ctx)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + int i;
> +
> + for (i = 0; i < 50000; i++) {
> + if (dsi_reg_rd(ctx, PHY_STATUS, PHY_LOCK, 1))
> + return 0;
> + udelay(3);
> + }
> +
> + drm_err(dsi->drm, "dphy pll can not be locked\n");
> + return -ETIMEDOUT;
> +}
> +
> +static int dsi_wait_tx_payload_fifo_empty(struct dsi_context *ctx)
> +{
> + int i;
> +
> + for (i = 0; i < 5000; i++) {
> + if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_WDATA_FIFO_EMPTY, 3))
> + return 0;
> + udelay(1);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int dsi_wait_tx_cmd_fifo_empty(struct dsi_context *ctx)
> +{
> + int i;
> +
> + for (i = 0; i < 5000; i++) {
> + if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_CMD_FIFO_EMPTY, 5))
> + return 0;
> + udelay(1);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int dsi_wait_rd_resp_completed(struct dsi_context *ctx)
> +{
> + int i;
> +
> + for (i = 0; i < 10000; i++) {
> + if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDCMD_DONE, 7))
> + return 0;
> + udelay(10);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static u16 calc_bytes_per_pixel_x100(int coding)
> +{
> + u16 Bpp_x100;
> +
> + switch (coding) {
> + case COLOR_CODE_16BIT_CONFIG1:
> + case COLOR_CODE_16BIT_CONFIG2:
> + case COLOR_CODE_16BIT_CONFIG3:
> + Bpp_x100 = 200;
> + break;
> + case COLOR_CODE_18BIT_CONFIG1:
> + case COLOR_CODE_18BIT_CONFIG2:
> + Bpp_x100 = 225;
> + break;
> + case COLOR_CODE_24BIT:
> + Bpp_x100 = 300;
> + break;
> + case COLOR_CODE_COMPRESSTION:
> + Bpp_x100 = 100;
> + break;
> + case COLOR_CODE_20BIT_YCC422_LOOSELY:
> + Bpp_x100 = 250;
> + break;
> + case COLOR_CODE_24BIT_YCC422:
> + Bpp_x100 = 300;
> + break;
> + case COLOR_CODE_16BIT_YCC422:
> + Bpp_x100 = 200;
> + break;
> + case COLOR_CODE_30BIT:
> + Bpp_x100 = 375;
> + break;
> + case COLOR_CODE_36BIT:
> + Bpp_x100 = 450;
> + break;
> + case COLOR_CODE_12BIT_YCC420:
> + Bpp_x100 = 150;
> + break;
> + default:
> + DRM_ERROR("invalid color coding");
> + Bpp_x100 = 0;
> + break;
> + }
> +
> + return Bpp_x100;
> +}
> +
> +static u8 calc_video_size_step(int coding)
> +{
> + u8 video_size_step;
> +
> + switch (coding) {
> + case COLOR_CODE_16BIT_CONFIG1:
> + case COLOR_CODE_16BIT_CONFIG2:
> + case COLOR_CODE_16BIT_CONFIG3:
> + case COLOR_CODE_18BIT_CONFIG1:
> + case COLOR_CODE_18BIT_CONFIG2:
> + case COLOR_CODE_24BIT:
> + case COLOR_CODE_COMPRESSTION:
> + return video_size_step = 1;
> + case COLOR_CODE_20BIT_YCC422_LOOSELY:
> + case COLOR_CODE_24BIT_YCC422:
> + case COLOR_CODE_16BIT_YCC422:
> + case COLOR_CODE_30BIT:
> + case COLOR_CODE_36BIT:
> + case COLOR_CODE_12BIT_YCC420:
> + return video_size_step = 2;
> + default:
> + DRM_ERROR("invalid color coding");
> + return 0;
> + }
> +}
> +
> +static u16 round_video_size(int coding, u16 video_size)
> +{
> + switch (coding) {
> + case COLOR_CODE_16BIT_YCC422:
> + case COLOR_CODE_24BIT_YCC422:
> + case COLOR_CODE_20BIT_YCC422_LOOSELY:
> + case COLOR_CODE_12BIT_YCC420:
> + /* round up active H pixels to a multiple of 2 */
> + if ((video_size % 2) != 0)
> + video_size += 1;
> + break;
> + default:
> + break;
> + }
> +
> + return video_size;
> +}
> +
> +#define SPRD_MIPI_DSI_FMT_DSC 0xff
> +static u32 fmt_to_coding(u32 fmt)
> +{
> + switch (fmt) {
> + case MIPI_DSI_FMT_RGB565:
> + return COLOR_CODE_16BIT_CONFIG1;
> + case MIPI_DSI_FMT_RGB666:
> + case MIPI_DSI_FMT_RGB666_PACKED:
> + return COLOR_CODE_18BIT_CONFIG1;
> + case MIPI_DSI_FMT_RGB888:
> + return COLOR_CODE_24BIT;
> + case SPRD_MIPI_DSI_FMT_DSC:
> + return COLOR_CODE_COMPRESSTION;
> + default:
> + DRM_ERROR("Unsupported format (%d)\n", fmt);
> + return COLOR_CODE_24BIT;
> + }
> +}
> +
> +#define ns_to_cycle(ns, byte_clk) \
> + DIV_ROUND_UP((ns) * (byte_clk), 1000000)
> +
> +static void sprd_dsi_init(struct dsi_context *ctx)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + u32 byte_clk = dsi->slave->hs_rate / 8;
> + u16 data_hs2lp, data_lp2hs, clk_hs2lp, clk_lp2hs;
> + u16 max_rd_time;
> + int div;
> +
> + writel(0, ctx->base + SOFT_RESET);
> + writel(0xffffffff, ctx->base + MASK_PROTOCOL_INT);
> + writel(0xffffffff, ctx->base + MASK_INTERNAL_INT);
> + writel(1, ctx->base + DSI_MODE_CFG);
> + dsi_reg_up(ctx, EOTP_EN, RX_EOTP_EN, 0);
> + dsi_reg_up(ctx, EOTP_EN, TX_EOTP_EN, 0);
> + dsi_reg_up(ctx, RX_PKT_CHECK_CONFIG, RX_PKT_ECC_EN, RX_PKT_ECC_EN);
> + dsi_reg_up(ctx, RX_PKT_CHECK_CONFIG, RX_PKT_CRC_EN, RX_PKT_CRC_EN);
> + writel(1, ctx->base + TA_EN);
> + dsi_reg_up(ctx, VIRTUAL_CHANNEL_ID, VIDEO_PKT_VCID, 0);
> + dsi_reg_up(ctx, VIRTUAL_CHANNEL_ID, GEN_RX_VCID, 0);
> +
> + div = DIV_ROUND_UP(byte_clk, dsi->slave->lp_rate);
> + writel(div, ctx->base + TX_ESC_CLK_CONFIG);
> +
> + max_rd_time = ns_to_cycle(ctx->max_rd_time, byte_clk);
> + writel(max_rd_time, ctx->base + MAX_READ_TIME);
> +
> + data_hs2lp = ns_to_cycle(ctx->data_hs2lp, byte_clk);
> + data_lp2hs = ns_to_cycle(ctx->data_lp2hs, byte_clk);
> + clk_hs2lp = ns_to_cycle(ctx->clk_hs2lp, byte_clk);
> + clk_lp2hs = ns_to_cycle(ctx->clk_lp2hs, byte_clk);
> + dsi_reg_wr(ctx, PHY_DATALANE_TIME_CONFIG,
> + PHY_DATALANE_HS_TO_LP_TIME, 16, data_hs2lp);
> + dsi_reg_wr(ctx, PHY_DATALANE_TIME_CONFIG,
> + PHY_DATALANE_LP_TO_HS_TIME, 0, data_lp2hs);
> + dsi_reg_wr(ctx, PHY_CLKLANE_TIME_CONFIG,
> + PHY_CLKLANE_HS_TO_LP_TIME, 16, clk_hs2lp);
> + dsi_reg_wr(ctx, PHY_CLKLANE_TIME_CONFIG,
> + PHY_CLKLANE_LP_TO_HS_TIME, 0, clk_lp2hs);
> +
> + writel(1, ctx->base + SOFT_RESET);
> +}
> +
> +/*
> + * Free up resources and shutdown host controller and PHY
> + */
> +static void sprd_dsi_fini(struct dsi_context *ctx)
> +{
> + writel(0xffffffff, ctx->base + MASK_PROTOCOL_INT);
> + writel(0xffffffff, ctx->base + MASK_INTERNAL_INT);
> + writel(0, ctx->base + SOFT_RESET);
> +}
> +
> +/*
> + * If not in burst mode, it will compute the video and null packet sizes
> + * according to necessity.
> + * Configure timers for data lanes and/or clock lane to return to LP when
> + * bandwidth is not filled by data.
> + */
> +static int sprd_dsi_dpi_video(struct dsi_context *ctx)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + struct videomode *vm = &ctx->vm;
> + u32 byte_clk = dsi->slave->hs_rate / 8;
> + u16 Bpp_x100;
> + u16 video_size;
> + u32 ratio_x1000;
> + u16 null_pkt_size = 0;
> + u8 video_size_step;
> + u32 hs_to;
> + u32 total_bytes;
> + u32 bytes_per_chunk;
> + u32 chunks = 0;
> + u32 bytes_left = 0;
> + u32 chunk_overhead;
> + const u8 pkt_header = 6;
> + u8 coding;
> + int div;
> + u16 hline;
> + u16 byte_cycle;
> +
> + coding = fmt_to_coding(dsi->slave->format);
> + video_size = round_video_size(coding, vm->hactive);
> + Bpp_x100 = calc_bytes_per_pixel_x100(coding);
> + video_size_step = calc_video_size_step(coding);
> + ratio_x1000 = byte_clk * 1000 / (vm->pixelclock / 1000);
> + hline = vm->hactive + vm->hsync_len + vm->hfront_porch +
> + vm->hback_porch;
> +
> + writel(0, ctx->base + SOFT_RESET);
> + dsi_reg_wr(ctx, VID_MODE_CFG, FRAME_BTA_ACK_EN, 15, ctx->frame_ack_en);
> + dsi_reg_wr(ctx, DPI_VIDEO_FORMAT, DPI_VIDEO_MODE_FORMAT, 0, coding);
> + dsi_reg_wr(ctx, VID_MODE_CFG, VID_MODE_TYPE, 0, ctx->burst_mode);
> + byte_cycle = 95 * hline * ratio_x1000 / 100000;
> + dsi_reg_wr(ctx, VIDEO_SIG_DELAY_CONFIG, VIDEO_SIG_DELAY, 0, byte_cycle);
> + byte_cycle = hline * ratio_x1000 / 1000;
> + writel(byte_cycle, ctx->base + VIDEO_LINE_TIME);
> + byte_cycle = vm->hsync_len * ratio_x1000 / 1000;
> + dsi_reg_wr(ctx, VIDEO_LINE_HBLK_TIME, VIDEO_LINE_HSA_TIME, 16, byte_cycle);
> + byte_cycle = vm->hback_porch * ratio_x1000 / 1000;
> + dsi_reg_wr(ctx, VIDEO_LINE_HBLK_TIME, VIDEO_LINE_HBP_TIME, 0, byte_cycle);
> + writel(vm->vactive, ctx->base + VIDEO_VACTIVE_LINES);
> + dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VFP_LINES, 0, vm->vfront_porch);
> + dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VBP_LINES, 10, vm->vback_porch);
> + dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VSA_LINES, 20, vm->vsync_len);
> + dsi_reg_up(ctx, VID_MODE_CFG, LP_HBP_EN | LP_HFP_EN | LP_VACT_EN |
> + LP_VFP_EN | LP_VBP_EN | LP_VSA_EN, LP_HBP_EN | LP_HFP_EN |
> + LP_VACT_EN | LP_VFP_EN | LP_VBP_EN | LP_VSA_EN);
> +
> + hs_to = (hline * vm->vactive) + (2 * Bpp_x100) / 100;
> + for (div = 0x80; (div < hs_to) && (div > 2); div--) {
> + if ((hs_to % div) == 0) {
> + writel(div, ctx->base + TIMEOUT_CNT_CLK_CONFIG);
> + writel(hs_to / div, ctx->base + LRX_H_TO_CONFIG);
> + writel(hs_to / div, ctx->base + HTX_TO_CONFIG);
> + break;
> + }
> + }
> +
> + if (ctx->burst_mode == VIDEO_BURST_WITH_SYNC_PULSES) {
> + dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_PKT_SIZE, 0, video_size);
> + writel(0, ctx->base + VIDEO_NULLPKT_SIZE);
> + dsi_reg_up(ctx, VIDEO_PKT_CONFIG, VIDEO_LINE_CHUNK_NUM, 0);
> + } else {
> + /* non burst transmission */
> + null_pkt_size = 0;
> +
> + /* bytes to be sent - first as one chunk */
> + bytes_per_chunk = vm->hactive * Bpp_x100 / 100 + pkt_header;
> +
> + /* hline total bytes from the DPI interface */
> + total_bytes = (vm->hactive + vm->hfront_porch) *
> + ratio_x1000 / dsi->slave->lanes / 1000;
> +
> + /* check if the pixels actually fit on the DSI link */
> + if (total_bytes < bytes_per_chunk) {
> + drm_err(dsi->drm, "current resolution can not be set\n");
> + return -EINVAL;
> + }
> +
> + chunk_overhead = total_bytes - bytes_per_chunk;
> +
> + /* overhead higher than 1 -> enable multi packets */
> + if (chunk_overhead > 1) {
> +
> + /* multi packets */
> + for (video_size = video_size_step;
> + video_size < vm->hactive;
> + video_size += video_size_step) {
> +
> + if (vm->hactive * 1000 / video_size % 1000)
> + continue;
> +
> + chunks = vm->hactive / video_size;
> + bytes_per_chunk = Bpp_x100 * video_size / 100
> + + pkt_header;
> + if (total_bytes >= (bytes_per_chunk * chunks)) {
> + bytes_left = total_bytes -
> + bytes_per_chunk * chunks;
> + break;
> + }
> + }
> +
> + /* prevent overflow (unsigned - unsigned) */
> + if (bytes_left > (pkt_header * chunks)) {
> + null_pkt_size = (bytes_left -
> + pkt_header * chunks) / chunks;
> + /* avoid register overflow */
> + if (null_pkt_size > 1023)
> + null_pkt_size = 1023;
> + }
> +
> + } else {
> +
> + /* single packet */
> + chunks = 1;
> +
> + /* must be a multiple of 4 except 18 loosely */
> + for (video_size = vm->hactive;
> + (video_size % video_size_step) != 0;
> + video_size++)
> + ;
> + }
> +
> + dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_PKT_SIZE, 0, video_size);
> + writel(null_pkt_size, ctx->base + VIDEO_NULLPKT_SIZE);
> + dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_LINE_CHUNK_NUM, 16, chunks);
> + }
> +
> + writel(ctx->int0_mask, ctx->base + MASK_PROTOCOL_INT);
> + writel(ctx->int1_mask, ctx->base + MASK_INTERNAL_INT);
> + writel(1, ctx->base + SOFT_RESET);
> +
> + return 0;
> +}
> +
> +static void sprd_dsi_edpi_video(struct dsi_context *ctx)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + const u32 fifo_depth = 1096;
> + const u32 word_length = 4;
> + u32 hactive = ctx->vm.hactive;
> + u32 Bpp_x100;
> + u32 max_fifo_len;
> + u8 coding;
> +
> + coding = fmt_to_coding(dsi->slave->format);
> + Bpp_x100 = calc_bytes_per_pixel_x100(coding);
> + max_fifo_len = word_length * fifo_depth * 100 / Bpp_x100;
> +
> + writel(0, ctx->base + SOFT_RESET);
> + dsi_reg_wr(ctx, DPI_VIDEO_FORMAT, DPI_VIDEO_MODE_FORMAT, 0, coding);
> + dsi_reg_wr(ctx, CMD_MODE_CFG, TEAR_FX_EN, 0, ctx->te_ack_en);
> +
> + if (max_fifo_len > hactive)
> + writel(hactive, ctx->base + DCS_WM_PKT_SIZE);
> + else
> + writel(max_fifo_len, ctx->base + DCS_WM_PKT_SIZE);
> +
> + writel(ctx->int0_mask, ctx->base + MASK_PROTOCOL_INT);
> + writel(ctx->int1_mask, ctx->base + MASK_INTERNAL_INT);
> + writel(1, ctx->base + SOFT_RESET);
> +}
> +
> +/*
> + * Send a packet on the generic interface,
> + * this function has an active delay to wait for the buffer to clear.
> + * The delay is limited to:
> + * (param_length / 4) x DSIH_FIFO_ACTIVE_WAIT x register access time
> + * the controller restricts the sending of.
> + *
> + * This function will not be able to send Null and Blanking packets due to
> + * controller restriction
> + */
> +static int sprd_dsi_wr_pkt(struct dsi_context *ctx, u8 vc, u8 type,
> + const u8 *param, u16 len)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + u8 wc_lsbyte, wc_msbyte;
> + u32 payload;
> + int i, j, ret;
> +
> + if (vc > 3)
> + return -EINVAL;
> +
> +
> + /* 1st: for long packet, must config payload first */
> + ret = dsi_wait_tx_payload_fifo_empty(ctx);
> + if (ret) {
> + drm_err(dsi->drm, "tx payload fifo is not empty\n");
> + return ret;
> + }
> +
> + if (len > 2) {
> + for (i = 0, j = 0; i < len; i += j) {
> + payload = 0;
> + for (j = 0; (j < 4) && ((j + i) < (len)); j++)
> + payload |= param[i + j] << (j * 8);
> +
> + writel(payload, ctx->base + GEN_PLD_DATA);
> + }
> + wc_lsbyte = len & 0xff;
> + wc_msbyte = len >> 8;
> + } else {
> + wc_lsbyte = (len > 0) ? param[0] : 0;
> + wc_msbyte = (len > 1) ? param[1] : 0;
> + }
> +
> + /* 2nd: then set packet header */
> + ret = dsi_wait_tx_cmd_fifo_empty(ctx);
> + if (ret) {
> + drm_err(dsi->drm, "tx cmd fifo is not empty\n");
> + return ret;
> + }
> +
> + writel(type | (vc << 6) | (wc_lsbyte << 8) | (wc_msbyte << 16),
> + ctx->base + GEN_HDR);
> +
> + return 0;
> +}
> +
> +/*
> + * Send READ packet to peripheral using the generic interface,
> + * this will force command mode and stop video mode (because of BTA).
> + *
> + * This function has an active delay to wait for the buffer to clear,
> + * the delay is limited to 2 x DSIH_FIFO_ACTIVE_WAIT
> + * (waiting for command buffer, and waiting for receiving)
> + * @note this function will enable BTA
> + */
> +static int sprd_dsi_rd_pkt(struct dsi_context *ctx, u8 vc, u8 type,
> + u8 msb_byte, u8 lsb_byte,
> + u8 *buffer, u8 bytes_to_read)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + int i, ret;
> + int count = 0;
> + u32 temp;
> +
> + if (vc > 3)
> + return -EINVAL;
> +
> + /* 1st: send read command to peripheral */
> + ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_CMD_FIFO_EMPTY, 5);
> + if (!ret)
> + return -EIO;
> +
> + writel(type | (vc << 6) | (lsb_byte << 8) | (msb_byte << 16),
> + ctx->base + GEN_HDR);
> +
> + /* 2nd: wait peripheral response completed */
> + ret = dsi_wait_rd_resp_completed(ctx);
> + if (ret) {
> + drm_err(dsi->drm, "wait read response time out\n");
> + return ret;
> + }
> +
> + /* 3rd: get data from rx payload fifo */
> + ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDATA_FIFO_EMPTY, 1);
> + if (ret) {
> + drm_err(dsi->drm, "rx payload fifo empty\n");
> + return -EIO;
> + }
> +
> + for (i = 0; i < 100; i++) {
> + temp = readl(ctx->base + GEN_PLD_DATA);
> +
> + if (count < bytes_to_read)
> + buffer[count++] = temp & 0xff;
> + if (count < bytes_to_read)
> + buffer[count++] = (temp >> 8) & 0xff;
> + if (count < bytes_to_read)
> + buffer[count++] = (temp >> 16) & 0xff;
> + if (count < bytes_to_read)
> + buffer[count++] = (temp >> 24) & 0xff;
> +
> + ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDATA_FIFO_EMPTY, 1);
> + if (ret)
> + return count;
> + }
> +
> + return 0;
> +}
> +
> +static void sprd_dsi_set_work_mode(struct dsi_context *ctx, u8 mode)
> +{
> + if (mode == DSI_MODE_CMD)
> + writel(1, ctx->base + DSI_MODE_CFG);
> + else
> + writel(0, ctx->base + DSI_MODE_CFG);
> +}
> +
> +static void sprd_dsi_lp_cmd_enable(struct dsi_context *ctx)
> +{
> + if (readl(ctx->base + DSI_MODE_CFG))
> + dsi_reg_up(ctx, CMD_MODE_CFG, GEN_SW_0P_TX | GEN_SW_1P_TX |
> + GEN_SW_2P_TX | GEN_SR_0P_TX | GEN_SR_1P_TX | GEN_SR_2P_TX |
> + GEN_LW_TX | DCS_SW_0P_TX | DCS_SW_1P_TX | DCS_SR_0P_TX |
> + DCS_LW_TX | MAX_RD_PKT_SIZE, GEN_SW_0P_TX | GEN_SW_1P_TX |
> + GEN_SW_2P_TX | GEN_SR_0P_TX | GEN_SR_1P_TX | GEN_SR_2P_TX |
> + GEN_LW_TX | DCS_SW_0P_TX | DCS_SW_1P_TX | DCS_SR_0P_TX |
> + DCS_LW_TX | MAX_RD_PKT_SIZE);
> + else
> + dsi_reg_up(ctx, VID_MODE_CFG, LP_CMD_EN, LP_CMD_EN);
> +}
> +
> +static void sprd_dsi_state_reset(struct dsi_context *ctx)
> +{
> + writel(0, ctx->base + SOFT_RESET);
> + udelay(100);
> + writel(1, ctx->base + SOFT_RESET);
> +}
> +
> +static int sprd_dphy_init(struct dsi_context *ctx)
> +{
> + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> + int ret;
> +
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, 0);
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, 0);
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_CLK_EN, 0);
> +
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, 0);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, PHY_TESTCLR);
> + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, 0);
> +
> + dphy_pll_config(ctx);
> + dphy_timing_config(ctx);
> +
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, RF_PHY_SHUTDOWN);
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, RF_PHY_RESET_N);
> + writel(0x1C, ctx->base + PHY_MIN_STOP_TIME);
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_CLK_EN, RF_PHY_CLK_EN);
> + writel(dsi->slave->lanes - 1, ctx->base + PHY_LANE_NUM_CONFIG);
> +
> + ret = dphy_wait_pll_locked(ctx);
> + if (ret) {
> + drm_err(dsi->drm, "dphy initial failed\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void sprd_dphy_fini(struct dsi_context *ctx)
> +{
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, 0);
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, 0);
> + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, RF_PHY_RESET_N);
> +}
> +
> +static void sprd_dsi_encoder_enable(struct drm_encoder *encoder)
> +{
> + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> + struct sprd_dpu *dpu = to_sprd_crtc(encoder->crtc);
> + struct dsi_context *ctx = &dsi->ctx;
> +
> + if (ctx->enabled) {
> + drm_warn(dsi->drm, "dsi is initialized\n");
> + return;
> + }
> +
> + sprd_dsi_init(ctx);
> + if (ctx->work_mode == DSI_MODE_VIDEO)
> + sprd_dsi_dpi_video(ctx);
> + else
> + sprd_dsi_edpi_video(ctx);
> +
> + sprd_dphy_init(ctx);
> +
> + sprd_dsi_lp_cmd_enable(ctx);
> +
> + if (dsi->panel) {
> + drm_panel_prepare(dsi->panel);
> + drm_panel_enable(dsi->panel);
> + }

Please use the new devm_drm_of_get_bridge helper here, and use the
bridge API instead.

> + sprd_dsi_set_work_mode(ctx, ctx->work_mode);
> + sprd_dsi_state_reset(ctx);
> +
> + if (dsi->slave->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
> + dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, AUTO_CLKLANE_CTRL_EN,
> + AUTO_CLKLANE_CTRL_EN);
> + else {
> + dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, RF_PHY_CLK_EN, RF_PHY_CLK_EN);
> + dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, PHY_CLKLANE_TX_REQ_HS,
> + PHY_CLKLANE_TX_REQ_HS);
> + dphy_wait_pll_locked(ctx);
> + }
> +
> + sprd_dpu_run(dpu);
> +
> + ctx->enabled = true;
> +}
> +
> +static void sprd_dsi_encoder_disable(struct drm_encoder *encoder)
> +{
> + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> + struct sprd_dpu *dpu = to_sprd_crtc(encoder->crtc);
> + struct dsi_context *ctx = &dsi->ctx;
> +
> + if (!ctx->enabled) {
> + drm_warn(dsi->drm, "dsi isn't initialized\n");
> + return;
> + }
> +
> + sprd_dpu_stop(dpu);
> + sprd_dsi_set_work_mode(ctx, DSI_MODE_CMD);
> + sprd_dsi_lp_cmd_enable(ctx);
> +
> + if (dsi->panel) {
> + drm_panel_disable(dsi->panel);
> + drm_panel_unprepare(dsi->panel);
> + }
> +
> + sprd_dphy_fini(ctx);
> + sprd_dsi_fini(ctx);
> +
> + ctx->enabled = false;
> +}
> +
> +static void sprd_dsi_encoder_mode_set(struct drm_encoder *encoder,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adj_mode)
> +{
> + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> +
> + drm_dbg(dsi->drm, "%s() set mode: %s\n", __func__, dsi->mode->name);
> +}

You don't need that function?

> +static int sprd_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state)
> +{
> + return 0;
> +}

Ditto

> +static const struct drm_encoder_helper_funcs sprd_encoder_helper_funcs = {
> + .atomic_check = sprd_dsi_encoder_atomic_check,
> + .mode_set = sprd_dsi_encoder_mode_set,
> + .enable = sprd_dsi_encoder_enable,
> + .disable = sprd_dsi_encoder_disable
> +};
> +
> +static const struct drm_encoder_funcs sprd_encoder_funcs = {
> + .destroy = drm_encoder_cleanup,
> +};
> +
> +static struct sprd_dsi *sprd_dsi_encoder_init(struct drm_device *drm,
> + struct device *dev)
> +{
> + struct sprd_dsi *dsi;
> + u32 crtc_mask;
> +
> + crtc_mask = drm_of_find_possible_crtcs(drm, dev->of_node);
> + if (!crtc_mask) {
> + drm_err(drm, "failed to find crtc mask\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + drm_dbg(drm, "find possible crtcs: 0x%08x\n", crtc_mask);
> +
> + dsi = drmm_encoder_alloc(drm, struct sprd_dsi, encoder,
> + &sprd_encoder_funcs, DRM_MODE_ENCODER_DSI, NULL);
> + if (IS_ERR(dsi)) {
> + drm_err(drm, "failed to init dsi encoder.\n");
> + return dsi;
> + }
> +
> + dsi->encoder.possible_crtcs = crtc_mask;
> + drm_encoder_helper_add(&dsi->encoder, &sprd_encoder_helper_funcs);
> +
> + return dsi;
> +}
> +
> +static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
> +{
> + struct device *dev = dsi->host.dev;
> + struct device_node *child, *lcds_node;
> + struct drm_panel *panel;
> +
> + /* search /lcds child node first */
> + lcds_node = of_find_node_by_path("/lcds");
> + for_each_child_of_node(lcds_node, child) {
> + panel = of_drm_find_panel(child);
> + if (!IS_ERR(panel)) {
> + dsi->panel = panel;
> + return 0;
> + }
> + }
> +
> + /*
> + * If /lcds child node search failed, we search
> + * the child of dsi host node.
> + */
> + for_each_child_of_node(dev->of_node, child) {
> + panel = of_drm_find_panel(child);
> + if (!IS_ERR(panel)) {
> + dsi->panel = panel;
> + return 0;
> + }
> + }
> +
> + drm_err(dsi->drm, "of_drm_find_panel() failed\n");
> + return -ENODEV;
> +}

Just use devm_drm_of_get_bridge there

> +static int sprd_dsi_host_attach(struct mipi_dsi_host *host,
> + struct mipi_dsi_device *slave)
> +{
> + struct sprd_dsi *dsi = host_to_dsi(host);
> + struct dsi_context *ctx = &dsi->ctx;
> + int ret;
> +
> + dsi->slave = slave;
> +
> + if (slave->mode_flags & MIPI_DSI_MODE_VIDEO)
> + ctx->work_mode = DSI_MODE_VIDEO;
> + else
> + ctx->work_mode = DSI_MODE_CMD;
> +
> + if (slave->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> + ctx->burst_mode = VIDEO_BURST_WITH_SYNC_PULSES;
> + else if (slave->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> + ctx->burst_mode = VIDEO_NON_BURST_WITH_SYNC_PULSES;
> + else
> + ctx->burst_mode = VIDEO_NON_BURST_WITH_SYNC_EVENTS;
> +
> + ret = sprd_dsi_find_panel(dsi);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int sprd_dsi_host_detach(struct mipi_dsi_host *host,
> + struct mipi_dsi_device *slave)
> +{
> + /* do nothing */
> + return 0;
> +}
> +
> +static ssize_t sprd_dsi_host_transfer(struct mipi_dsi_host *host,
> + const struct mipi_dsi_msg *msg)
> +{
> + struct sprd_dsi *dsi = host_to_dsi(host);
> + const u8 *tx_buf = msg->tx_buf;
> +
> + if (msg->rx_buf && msg->rx_len) {
> + u8 lsb = (msg->tx_len > 0) ? tx_buf[0] : 0;
> + u8 msb = (msg->tx_len > 1) ? tx_buf[1] : 0;
> +
> + return sprd_dsi_rd_pkt(&dsi->ctx, msg->channel, msg->type,
> + msb, lsb, msg->rx_buf, msg->rx_len);
> + }
> +
> + if (msg->tx_buf && msg->tx_len)
> + return sprd_dsi_wr_pkt(&dsi->ctx, msg->channel, msg->type,
> + tx_buf, msg->tx_len);
> +
> + return 0;
> +}
> +
> +static const struct mipi_dsi_host_ops sprd_dsi_host_ops = {
> + .attach = sprd_dsi_host_attach,
> + .detach = sprd_dsi_host_detach,
> + .transfer = sprd_dsi_host_transfer,
> +};
> +
> +static int sprd_dsi_host_init(struct sprd_dsi *dsi, struct device *dev)
> +{
> + int ret;
> +
> + dsi->host.dev = dev;
> + dsi->host.ops = &sprd_dsi_host_ops;
> +
> + ret = mipi_dsi_host_register(&dsi->host);
> + if (ret)
> + drm_err(dsi->drm, "failed to register dsi host\n");
> +
> + return ret;
> +}
> +
> +static int sprd_dsi_connector_get_modes(struct drm_connector *connector)
> +{
> + struct sprd_dsi *dsi = connector_to_dsi(connector);
> +
> + return drm_panel_get_modes(dsi->panel, connector);
> +}
> +
> +static enum drm_mode_status
> +sprd_dsi_connector_mode_valid(struct drm_connector *connector,
> + struct drm_display_mode *mode)
> +{
> + struct sprd_dsi *dsi = connector_to_dsi(connector);
> +
> + drm_dbg(dsi->drm, "%s() mode: "DRM_MODE_FMT"\n", __func__, DRM_MODE_ARG(mode));
> +
> + if (mode->type & DRM_MODE_TYPE_PREFERRED) {
> + dsi->mode = mode;
> + drm_display_mode_to_videomode(dsi->mode, &dsi->ctx.vm);
> + }

I already told you this, but you shouldn't modify your state in
mode_valid, and certainly not based on whether it's the preferred mode
or not.

> + return MODE_OK;
> +}
> +
> +static struct drm_encoder *
> +sprd_dsi_connector_best_encoder(struct drm_connector *connector)
> +{
> + struct sprd_dsi *dsi = connector_to_dsi(connector);
> +
> + return &dsi->encoder;
> +}
> +
> +static struct drm_connector_helper_funcs sprd_dsi_connector_helper_funcs = {
> + .get_modes = sprd_dsi_connector_get_modes,
> + .mode_valid = sprd_dsi_connector_mode_valid,
> + .best_encoder = sprd_dsi_connector_best_encoder,
> +};
> +
> +static enum drm_connector_status
> +sprd_dsi_connector_detect(struct drm_connector *connector, bool force)
> +{
> + struct sprd_dsi *dsi = connector_to_dsi(connector);
> +
> + if (dsi->panel) {
> + drm_panel_add(dsi->panel);
> + return connector_status_connected;
> + }
> +
> + return connector_status_disconnected;
> +}
> +
> +static void sprd_dsi_connector_destroy(struct drm_connector *connector)
> +{
> + drm_connector_unregister(connector);
> + drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs sprd_dsi_atomic_connector_funcs = {
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .detect = sprd_dsi_connector_detect,
> + .destroy = sprd_dsi_connector_destroy,
> + .reset = drm_atomic_helper_connector_reset,
> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int sprd_dsi_connector_init(struct drm_device *drm, struct sprd_dsi *dsi)
> +{
> + struct drm_encoder *encoder = &dsi->encoder;
> + struct drm_connector *connector = &dsi->connector;
> + int ret;
> +
> + connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> + ret = drm_connector_init(drm, connector,
> + &sprd_dsi_atomic_connector_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + if (ret) {
> + drm_err(drm, "drm_connector_init() failed\n");
> + return ret;
> + }
> +
> + drm_connector_helper_add(connector,
> + &sprd_dsi_connector_helper_funcs);
> +
> + drm_connector_attach_encoder(connector, encoder);
> +
> + return 0;
> +}
> +
> +static int sprd_dsi_context_init(struct sprd_dsi *dsi,
> + struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct dsi_context *ctx = &dsi->ctx;
> + struct resource *res;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + ctx->base = devm_ioremap(dev, res->start, resource_size(res));
> + if (!ctx->base) {
> + drm_err(dsi->drm, "failed to map dsi host registers\n");
> + return -ENXIO;
> + }
> +
> + ctx->pll = devm_kzalloc(dev, sizeof(*ctx->pll), GFP_KERNEL);
> + if (!ctx->pll)
> + return -ENOMEM;
> +
> + ctx->regmap = devm_regmap_init(dev, &regmap_tst_io, dsi, &byte_config);
> + if (IS_ERR(ctx->regmap)) {
> + drm_err(dsi->drm, "dphy regmap init failed\n");
> + return PTR_ERR(ctx->regmap);
> + }
> +
> + ctx->data_hs2lp = 120;
> + ctx->data_lp2hs = 500;
> + ctx->clk_hs2lp = 4;
> + ctx->clk_lp2hs = 15;
> + ctx->max_rd_time = 6000;
> + ctx->int0_mask = 0xffffffff;
> + ctx->int1_mask = 0xffffffff;
> + ctx->enabled = true;
> +
> + return 0;
> +}
> +
> +static int sprd_dsi_bind(struct device *dev, struct device *master, void *data)
> +{
> + struct drm_device *drm = data;
> + struct sprd_dsi *dsi;
> + int ret;
> +
> + dsi = sprd_dsi_encoder_init(drm, dev);
> + if (IS_ERR(dsi))
> + return PTR_ERR(dsi);
> +
> + dsi->drm = drm;
> + dev_set_drvdata(dev, dsi);
> +
> + ret = sprd_dsi_connector_init(drm, dsi);
> + if (ret)
> + return ret;
> +
> + ret = sprd_dsi_context_init(dsi, dev);
> + if (ret)
> + return ret;
> +
> + ret = sprd_dsi_host_init(dsi, dev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static void sprd_dsi_unbind(struct device *dev,
> + struct device *master, void *data)
> +{
> + struct sprd_dsi *dsi = dev_get_drvdata(dev);
> +
> + mipi_dsi_host_unregister(&dsi->host);
> +}
> +
> +static const struct component_ops dsi_component_ops = {
> + .bind = sprd_dsi_bind,
> + .unbind = sprd_dsi_unbind,
> +};
> +
> +static const struct of_device_id dsi_match_table[] = {
> + { .compatible = "sprd,sharkl3-dsi-host" },
> + { /* sentinel */ },
> +};
> +
> +static int sprd_dsi_probe(struct platform_device *pdev)
> +{
> + return component_add(&pdev->dev, &dsi_component_ops);

In order to prevent probe issues, you need to register you mipi_dsi_host
here, see:
https://lore.kernel.org/dri-devel/[email protected]/

Maxime


Attachments:
(No filename) (54.69 kB)
signature.asc (235.00 B)
Download all attachments

2021-09-26 14:33:56

by Kevin Tang

[permalink] [raw]
Subject: Re: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

Maxime Ripard <[email protected]> 于2021年9月17日周五 下午11:40写道:
>
> On Fri, Aug 13, 2021 at 10:53:02PM +0800, Kevin Tang wrote:
> > Adds dsi host controller support for the Unisoc's display subsystem.
> > Adds dsi phy support for the Unisoc's display subsystem.
> > Only MIPI DSI Displays supported, DP/TV/HMDI will be support
> > in the feature.
> >
> > v1:
> > - Remove dphy and dsi graph binding, merge the dphy driver into the dsi.
> >
> > v2:
> > - Use drm_xxx to replace all DRM_XXX.
> > - Use kzalloc to replace devm_kzalloc for sprd_dsi structure init.
> >
> > v4:
> > - Use drmm_helpers to allocate encoder.
> > - Move allocate encoder and connector to bind function.
> >
> > v5:
> > - Drop the dsi ip file prefix.
> > - Fix the checkpatch warnings.
> > - Add Signed-off-by for dsi&dphy patch.
> > - Use the mode_flags of mipi_dsi_device to setup crtc DPI and EDPI mode.
> >
> > v6:
> > - Redesign the way to access the dsi register.
> > - Reduce the dsi_context member variables.
> > ---
> > drivers/gpu/drm/sprd/Kconfig | 1 +
> > drivers/gpu/drm/sprd/Makefile | 4 +-
> > drivers/gpu/drm/sprd/megacores_pll.c | 317 +++++++
> > drivers/gpu/drm/sprd/megacores_pll.h | 146 +++
> > drivers/gpu/drm/sprd/sprd_dpu.c | 17 +
> > drivers/gpu/drm/sprd/sprd_drm.c | 1 +
> > drivers/gpu/drm/sprd/sprd_drm.h | 1 +
> > drivers/gpu/drm/sprd/sprd_dsi.c | 1260 ++++++++++++++++++++++++++
> > drivers/gpu/drm/sprd/sprd_dsi.h | 94 ++
> > 9 files changed, 1840 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/gpu/drm/sprd/megacores_pll.c
> > create mode 100644 drivers/gpu/drm/sprd/megacores_pll.h
> > create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.c
> > create mode 100644 drivers/gpu/drm/sprd/sprd_dsi.h
> >
> > diff --git a/drivers/gpu/drm/sprd/Kconfig b/drivers/gpu/drm/sprd/Kconfig
> > index 37762c333..3edeaeca0 100644
> > --- a/drivers/gpu/drm/sprd/Kconfig
> > +++ b/drivers/gpu/drm/sprd/Kconfig
> > @@ -5,6 +5,7 @@ config DRM_SPRD
> > select DRM_GEM_CMA_HELPER
> > select DRM_KMS_CMA_HELPER
> > select DRM_KMS_HELPER
> > + select DRM_MIPI_DSI
> > select VIDEOMODE_HELPERS
> > help
> > Choose this option if you have a Unisoc chipset.
> > diff --git a/drivers/gpu/drm/sprd/Makefile b/drivers/gpu/drm/sprd/Makefile
> > index ab12b95e6..73f96c459 100644
> > --- a/drivers/gpu/drm/sprd/Makefile
> > +++ b/drivers/gpu/drm/sprd/Makefile
> > @@ -1,4 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0
> >
> > obj-y := sprd_drm.o \
> > - sprd_dpu.o
> > + sprd_dpu.o \
> > + sprd_dsi.o \
> > + megacores_pll.o
> > diff --git a/drivers/gpu/drm/sprd/megacores_pll.c b/drivers/gpu/drm/sprd/megacores_pll.c
> > new file mode 100644
> > index 000000000..0dfd3c372
> > --- /dev/null
> > +++ b/drivers/gpu/drm/sprd/megacores_pll.c
> > @@ -0,0 +1,317 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2020 Unisoc Inc.
> > + */
> > +
> > +#include <asm/div64.h>
> > +#include <linux/delay.h>
> > +#include <linux/init.h>
> > +#include <linux/kernel.h>
> > +#include <linux/regmap.h>
> > +#include <linux/string.h>
> > +
> > +#include "megacores_pll.h"
> > +
> > +#define L 0
> > +#define H 1
> > +#define CLK 0
> > +#define DATA 1
> > +#define INFINITY 0xffffffff
> > +#define MIN_OUTPUT_FREQ (100)
> > +
> > +#define AVERAGE(a, b) (min(a, b) + abs((b) - (a)) / 2)
> > +
> > +/* sharkle */
> > +#define VCO_BAND_LOW 750
> > +#define VCO_BAND_MID 1100
> > +#define VCO_BAND_HIGH 1500
> > +#define PHY_REF_CLK 26000
> > +
> > +static int dphy_calc_pll_param(struct dphy_pll *pll)
> > +{
> > + const u32 khz = 1000;
> > + const u32 mhz = 1000000;
> > + const unsigned long long factor = 100;
> > + unsigned long long tmp;
> > + int i;
> > +
> > + pll->potential_fvco = pll->freq / khz;
> > + pll->ref_clk = PHY_REF_CLK / khz;
> > +
> > + for (i = 0; i < 4; ++i) {
> > + if (pll->potential_fvco >= VCO_BAND_LOW &&
> > + pll->potential_fvco <= VCO_BAND_HIGH) {
> > + pll->fvco = pll->potential_fvco;
> > + pll->out_sel = BIT(i);
> > + break;
> > + }
> > + pll->potential_fvco <<= 1;
> > + }
> > + if (pll->fvco == 0)
> > + return -EINVAL;
> > +
> > + if (pll->fvco >= VCO_BAND_LOW && pll->fvco <= VCO_BAND_MID) {
> > + /* vco band control */
> > + pll->vco_band = 0x0;
> > + /* low pass filter control */
> > + pll->lpf_sel = 1;
> > + } else if (pll->fvco > VCO_BAND_MID && pll->fvco <= VCO_BAND_HIGH) {
> > + pll->vco_band = 0x1;
> > + pll->lpf_sel = 0;
> > + } else
> > + return -EINVAL;
>
> This doesn't follow the kernel coding style, make sure all the issues
> with checkpatch.pl --strict are fixed.
Here I should have used checkpatch to check, maybe the --strict
parameter was not added, i will check it again.
>
> > +
> > + pll->nint = pll->fvco / pll->ref_clk;
> > + tmp = pll->fvco * factor * mhz;
> > + do_div(tmp, pll->ref_clk);
> > + tmp = tmp - pll->nint * factor * mhz;
> > + tmp *= BIT(20);
> > + do_div(tmp, 100000000);
> > + pll->kint = (u32)tmp;
> > + pll->refin = 3; /* pre-divider bypass */
> > + pll->sdm_en = true; /* use fraction N PLL */
> > + pll->fdk_s = 0x1; /* fraction */
> > + pll->cp_s = 0x0;
> > + pll->det_delay = 0x1;
> > +
> > + return 0;
> > +}
> > +
> > +static void dphy_set_pll_reg(struct dphy_pll *pll, struct regmap *regmap)
> > +{
> > + struct pll_reg *reg = &pll->reg;
> > + u8 *val;
> > + int i;
> > +
> > + u8 reg_addr[] = {
> > + 0x03, 0x04, 0x06, 0x08, 0x09,
> > + 0x0a, 0x0b, 0x0e, 0x0f
> > + };
> > +
> > + reg->_03.bits.prbs_bist = 1;
> > + reg->_03.bits.en_lp_treot = true;
> > + reg->_03.bits.lpf_sel = pll->lpf_sel;
> > + reg->_03.bits.txfifo_bypass = 0;
> > + reg->_04.bits.div = pll->div;
> > + reg->_04.bits.masterof8lane = 1;
> > + reg->_04.bits.cp_s = pll->cp_s;
> > + reg->_04.bits.fdk_s = pll->fdk_s;
> > + reg->_06.bits.nint = pll->nint;
> > + reg->_08.bits.vco_band = pll->vco_band;
> > + reg->_08.bits.sdm_en = pll->sdm_en;
> > + reg->_08.bits.refin = pll->refin;
> > + reg->_09.bits.kint_h = pll->kint >> 12;
> > + reg->_0a.bits.kint_m = (pll->kint >> 4) & 0xff;
> > + reg->_0b.bits.out_sel = pll->out_sel;
> > + reg->_0b.bits.kint_l = pll->kint & 0xf;
> > + reg->_0e.bits.pll_pu_byp = 0;
> > + reg->_0e.bits.pll_pu = 0;
> > + reg->_0e.bits.stopstate_sel = 1;
> > + reg->_0f.bits.det_delay = pll->det_delay;
> > +
> > + val = (u8 *)&reg;
> > +
> > + for (i = 0; i < sizeof(reg_addr); ++i) {
> > + regmap_write(regmap, reg_addr[i], val[i]);
> > + DRM_DEBUG("%02x: %02x\n", reg_addr[i], val[i]);
> > + }
> > +}
>
> It would be great to also convert this part to a pattern without
> structures.
I will try it, but our pll registers, all not have official name from
aisc design owner.
If need to convert it, our pll regiters macro define, it can only be
named as reg_01, reg_02...
>
> > +
> > +int dphy_pll_config(struct dsi_context *ctx)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + struct regmap *regmap = ctx->regmap;
> > + struct dphy_pll *pll = ctx->pll;
> > + int ret;
> > +
> > + pll->freq = dsi->slave->hs_rate;
> > +
> > + /* FREQ = 26M * (NINT + KINT / 2^20) / out_sel */
> > + ret = dphy_calc_pll_param(pll);
> > + if (ret) {
> > + drm_err(dsi->drm, "failed to calculate dphy pll parameters\n");
> > + return ret;
> > + }
> > + dphy_set_pll_reg(pll, regmap);
> > +
> > + return 0;
> > +}
> > +
> > +static void dphy_set_timing_reg(struct regmap *regmap, int type, u8 val[])
> > +{
> > + switch (type) {
> > + case REQUEST_TIME:
> > + regmap_write(regmap, 0x31, val[CLK]);
> > + regmap_write(regmap, 0x41, val[DATA]);
> > + regmap_write(regmap, 0x51, val[DATA]);
> > + regmap_write(regmap, 0x61, val[DATA]);
> > + regmap_write(regmap, 0x71, val[DATA]);
> > +
> > + regmap_write(regmap, 0x90, val[CLK]);
> > + regmap_write(regmap, 0xa0, val[DATA]);
> > + regmap_write(regmap, 0xb0, val[DATA]);
> > + regmap_write(regmap, 0xc0, val[DATA]);
> > + regmap_write(regmap, 0xd0, val[DATA]);
> > + break;
>
> defines and macros would help the readability here
I will try it, but our pll registers, all not have official name from
aisc design owner.
If need to convert it, our pll regiters macro define, it can only be
named as reg_01, reg_02...
>
> > + case PREPARE_TIME:
> > + regmap_write(regmap, 0x32, val[CLK]);
> > + regmap_write(regmap, 0x42, val[DATA]);
> > + regmap_write(regmap, 0x52, val[DATA]);
> > + regmap_write(regmap, 0x62, val[DATA]);
> > + regmap_write(regmap, 0x72, val[DATA]);
> > +
> > + regmap_write(regmap, 0x91, val[CLK]);
> > + regmap_write(regmap, 0xa1, val[DATA]);
> > + regmap_write(regmap, 0xb1, val[DATA]);
> > + regmap_write(regmap, 0xc1, val[DATA]);
> > + regmap_write(regmap, 0xd1, val[DATA]);
> > + break;
> > + case ZERO_TIME:
> > + regmap_write(regmap, 0x33, val[CLK]);
> > + regmap_write(regmap, 0x43, val[DATA]);
> > + regmap_write(regmap, 0x53, val[DATA]);
> > + regmap_write(regmap, 0x63, val[DATA]);
> > + regmap_write(regmap, 0x73, val[DATA]);
> > +
> > + regmap_write(regmap, 0x92, val[CLK]);
> > + regmap_write(regmap, 0xa2, val[DATA]);
> > + regmap_write(regmap, 0xb2, val[DATA]);
> > + regmap_write(regmap, 0xc2, val[DATA]);
> > + regmap_write(regmap, 0xd2, val[DATA]);
> > + break;
> > + case TRAIL_TIME:
> > + regmap_write(regmap, 0x34, val[CLK]);
> > + regmap_write(regmap, 0x44, val[DATA]);
> > + regmap_write(regmap, 0x54, val[DATA]);
> > + regmap_write(regmap, 0x64, val[DATA]);
> > + regmap_write(regmap, 0x74, val[DATA]);
> > +
> > + regmap_write(regmap, 0x93, val[CLK]);
> > + regmap_write(regmap, 0xa3, val[DATA]);
> > + regmap_write(regmap, 0xb3, val[DATA]);
> > + regmap_write(regmap, 0xc3, val[DATA]);
> > + regmap_write(regmap, 0xd3, val[DATA]);
> > + break;
> > + case EXIT_TIME:
> > + regmap_write(regmap, 0x36, val[CLK]);
> > + regmap_write(regmap, 0x46, val[DATA]);
> > + regmap_write(regmap, 0x56, val[DATA]);
> > + regmap_write(regmap, 0x66, val[DATA]);
> > + regmap_write(regmap, 0x76, val[DATA]);
> > +
> > + regmap_write(regmap, 0x95, val[CLK]);
> > + regmap_write(regmap, 0xA5, val[DATA]);
> > + regmap_write(regmap, 0xB5, val[DATA]);
> > + regmap_write(regmap, 0xc5, val[DATA]);
> > + regmap_write(regmap, 0xd5, val[DATA]);
> > + break;
> > + case CLKPOST_TIME:
> > + regmap_write(regmap, 0x35, val[CLK]);
> > + regmap_write(regmap, 0x94, val[CLK]);
> > + break;
> > +
> > + /* the following just use default value */
> > + case SETTLE_TIME:
> > + case TA_GET:
> > + case TA_GO:
> > + case TA_SURE:
> > + break;
>
> you need to use fallthrough; for all those cases
I get it, thks.

>
> > + default:
> > + break;
> > + }
> > +}
> > +
> > +void dphy_timing_config(struct dsi_context *ctx)
> > +{
> > + struct regmap *regmap = ctx->regmap;
> > + struct dphy_pll *pll = ctx->pll;
> > + const u32 factor = 2;
> > + const u32 scale = 100;
> > + u32 t_ui, t_byteck, t_half_byteck;
> > + u32 range[2], constant;
> > + u8 val[2];
> > + u32 tmp = 0;
> > +
> > + /* t_ui: 1 ui, byteck: 8 ui, half byteck: 4 ui */
> > + t_ui = 1000 * scale / (pll->freq / 1000);
> > + t_byteck = t_ui << 3;
> > + t_half_byteck = t_ui << 2;
> > + constant = t_ui << 1;
> > +
> > + /* REQUEST_TIME: HS T-LPX: LP-01
> > + * For T-LPX, mipi spec defined min value is 50ns,
> > + * but maybe it shouldn't be too small, because BTA,
> > + * LP-10, LP-00, LP-01, all of this is related to T-LPX.
> > + */
> > + range[L] = 50 * scale;
> > + range[H] = INFINITY;
> > + val[CLK] = DIV_ROUND_UP(range[L] * (factor << 1), t_byteck) - 2;
> > + val[DATA] = val[CLK];
> > + dphy_set_timing_reg(regmap, REQUEST_TIME, val);
> > +
> > + /* PREPARE_TIME: HS sequence: LP-00 */
> > + range[L] = 38 * scale;
> > + range[H] = 95 * scale;
> > + tmp = AVERAGE(range[L], range[H]);
> > + val[CLK] = DIV_ROUND_UP(AVERAGE(range[L], range[H]),
> > + t_half_byteck) - 1;
> > + range[L] = 40 * scale + 4 * t_ui;
> > + range[H] = 85 * scale + 6 * t_ui;
> > + tmp |= AVERAGE(range[L], range[H]) << 16;
> > + val[DATA] = DIV_ROUND_UP(AVERAGE(range[L], range[H]),
> > + t_half_byteck) - 1;
> > + dphy_set_timing_reg(regmap, PREPARE_TIME, val);
> > +
> > + /* ZERO_TIME: HS-ZERO */
> > + range[L] = 300 * scale;
> > + range[H] = INFINITY;
> > + val[CLK] = DIV_ROUND_UP(range[L] * factor + (tmp & 0xffff)
> > + - 525 * t_byteck / 100, t_byteck) - 2;
> > + range[L] = 145 * scale + 10 * t_ui;
> > + val[DATA] = DIV_ROUND_UP(range[L] * factor
> > + + ((tmp >> 16) & 0xffff) - 525 * t_byteck / 100,
> > + t_byteck) - 2;
> > + dphy_set_timing_reg(regmap, ZERO_TIME, val);
> > +
> > + /* TRAIL_TIME: HS-TRAIL */
> > + range[L] = 60 * scale;
> > + range[H] = INFINITY;
> > + val[CLK] = DIV_ROUND_UP(range[L] * factor - constant, t_half_byteck);
> > + range[L] = max(8 * t_ui, 60 * scale + 4 * t_ui);
> > + val[DATA] = DIV_ROUND_UP(range[L] * 3 / 2 - constant, t_half_byteck) - 2;
> > + dphy_set_timing_reg(regmap, TRAIL_TIME, val);
> > +
> > + /* EXIT_TIME: */
> > + range[L] = 100 * scale;
> > + range[H] = INFINITY;
> > + val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2;
> > + val[DATA] = val[CLK];
> > + dphy_set_timing_reg(regmap, EXIT_TIME, val);
> > +
> > + /* CLKPOST_TIME: */
> > + range[L] = 60 * scale + 52 * t_ui;
> > + range[H] = INFINITY;
> > + val[CLK] = DIV_ROUND_UP(range[L] * factor, t_byteck) - 2;
> > + val[DATA] = val[CLK];
> > + dphy_set_timing_reg(regmap, CLKPOST_TIME, val);
> > +
> > + /* SETTLE_TIME:
> > + * This time is used for receiver. So for transmitter,
> > + * it can be ignored.
> > + */
> > +
> > + /* TA_GO:
> > + * transmitter drives bridge state(LP-00) before releasing control,
> > + * reg 0x1f default value: 0x04, which is good.
> > + */
> > +
> > + /* TA_SURE:
> > + * After LP-10 state and before bridge state(LP-00),
> > + * reg 0x20 default value: 0x01, which is good.
> > + */
> > +
> > + /* TA_GET:
> > + * receiver drives Bridge state(LP-00) before releasing control
> > + * reg 0x21 default value: 0x03, which is good.
> > + */
> > +}
> > diff --git a/drivers/gpu/drm/sprd/megacores_pll.h b/drivers/gpu/drm/sprd/megacores_pll.h
> > new file mode 100644
> > index 000000000..bf20aae65
> > --- /dev/null
> > +++ b/drivers/gpu/drm/sprd/megacores_pll.h
> > @@ -0,0 +1,146 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2020 Unisoc Inc.
> > + */
> > +
> > +#ifndef _MEGACORES_PLL_H_
> > +#define _MEGACORES_PLL_H_
> > +
> > +#include "sprd_dsi.h"
> > +
> > +enum PLL_TIMING {
> > + NONE,
> > + REQUEST_TIME,
> > + PREPARE_TIME,
> > + SETTLE_TIME,
> > + ZERO_TIME,
> > + TRAIL_TIME,
> > + EXIT_TIME,
> > + CLKPOST_TIME,
> > + TA_GET,
> > + TA_GO,
> > + TA_SURE,
> > + TA_WAIT,
> > +};
> > +
> > +struct pll_reg {
> > + union __reg_03__ {
> > + struct __03 {
> > + u8 prbs_bist: 1;
> > + u8 en_lp_treot: 1;
> > + u8 lpf_sel: 4;
> > + u8 txfifo_bypass: 1;
> > + u8 freq_hopping: 1;
> > + } bits;
> > + u8 val;
> > + } _03;
> > + union __reg_04__ {
> > + struct __04 {
> > + u8 div: 3;
> > + u8 masterof8lane: 1;
> > + u8 hop_trig: 1;
> > + u8 cp_s: 2;
> > + u8 fdk_s: 1;
> > + } bits;
> > + u8 val;
> > + } _04;
> > + union __reg_06__ {
> > + struct __06 {
> > + u8 nint: 7;
> > + u8 mod_en: 1;
> > + } bits;
> > + u8 val;
> > + } _06;
> > + union __reg_07__ {
> > + struct __07 {
> > + u8 kdelta_h: 8;
> > + } bits;
> > + u8 val;
> > + } _07;
> > + union __reg_08__ {
> > + struct __08 {
> > + u8 vco_band: 1;
> > + u8 sdm_en: 1;
> > + u8 refin: 2;
> > + u8 kdelta_l: 4;
> > + } bits;
> > + u8 val;
> > + } _08;
> > + union __reg_09__ {
> > + struct __09 {
> > + u8 kint_h: 8;
> > + } bits;
> > + u8 val;
> > + } _09;
> > + union __reg_0a__ {
> > + struct __0a {
> > + u8 kint_m: 8;
> > + } bits;
> > + u8 val;
> > + } _0a;
> > + union __reg_0b__ {
> > + struct __0b {
> > + u8 out_sel: 4;
> > + u8 kint_l: 4;
> > + } bits;
> > + u8 val;
> > + } _0b;
> > + union __reg_0c__ {
> > + struct __0c {
> > + u8 kstep_h: 8;
> > + } bits;
> > + u8 val;
> > + } _0c;
> > + union __reg_0d__ {
> > + struct __0d {
> > + u8 kstep_m: 8;
> > + } bits;
> > + u8 val;
> > + } _0d;
> > + union __reg_0e__ {
> > + struct __0e {
> > + u8 pll_pu_byp: 1;
> > + u8 pll_pu: 1;
> > + u8 hsbist_len: 2;
> > + u8 stopstate_sel: 1;
> > + u8 kstep_l: 3;
> > + } bits;
> > + u8 val;
> > + } _0e;
> > + union __reg_0f__ {
> > + struct __0f {
> > + u8 det_delay:2;
> > + u8 kdelta: 4;
> > + u8 ldo0p4:2;
> > + } bits;
> > + u8 val;
> > + } _0f;
> > +};
> > +
> > +struct dphy_pll {
> > + u8 refin; /* Pre-divider control signal */
> > + u8 cp_s; /* 00: SDM_EN=1, 10: SDM_EN=0 */
> > + u8 fdk_s; /* PLL mode control: integer or fraction */
> > + u8 sdm_en;
> > + u8 div;
> > + u8 int_n; /* integer N PLL */
> > + u32 ref_clk; /* dphy reference clock, unit: MHz */
> > + u32 freq; /* panel config, unit: KHz */
> > + u32 fvco;
> > + u32 potential_fvco;
> > + u32 nint; /* sigma delta modulator NINT control */
> > + u32 kint; /* sigma delta modulator KINT control */
> > + u8 lpf_sel; /* low pass filter control */
> > + u8 out_sel; /* post divider control */
> > + u8 vco_band; /* vco range */
> > + u8 det_delay;
> > +
> > + struct pll_reg reg;
> > +};
> > +
> > +struct dsi_context;
> > +
> > +int dphy_pll_config(struct dsi_context *ctx);
> > +void dphy_timing_config(struct dsi_context *ctx);
> > +
> > +#endif /* _MEGACORES_PLL_H_ */
> > diff --git a/drivers/gpu/drm/sprd/sprd_dpu.c b/drivers/gpu/drm/sprd/sprd_dpu.c
> > index 448dd4fb6..4e3b30abe 100644
> > --- a/drivers/gpu/drm/sprd/sprd_dpu.c
> > +++ b/drivers/gpu/drm/sprd/sprd_dpu.c
> > @@ -25,6 +25,7 @@
> >
> > #include "sprd_drm.h"
> > #include "sprd_dpu.h"
> > +#include "sprd_dsi.h"
> >
> > /* Global control registers */
> > #define REG_DPU_CTRL 0x04
> > @@ -686,9 +687,25 @@ static void sprd_crtc_mode_set_nofb(struct drm_crtc *crtc)
> > {
> > struct sprd_dpu *dpu = to_sprd_crtc(crtc);
> > struct drm_display_mode *mode = &crtc->state->adjusted_mode;
> > + struct drm_encoder *encoder;
> > + struct mipi_dsi_device *slave;
> > + struct sprd_dsi *dsi;
> >
> > drm_display_mode_to_videomode(mode, &dpu->ctx.vm);
> >
> > + drm_for_each_encoder(encoder, crtc->dev) {
> > + if (encoder->crtc != crtc)
> > + continue;
> > +
> > + dsi = encoder_to_dsi(encoder);
> > + slave = dsi->slave;
> > +
> > + if (slave->mode_flags & MIPI_DSI_MODE_VIDEO)
> > + dpu->ctx.if_type = SPRD_DPU_IF_DPI;
> > + else
> > + dpu->ctx.if_type = SPRD_DPU_IF_EDPI;
> > + }
> > +
>
> You're not using if_type anywhere
Used in sprd_dpu.c as for crtc output type dpi or edpi.
>
> > sprd_dpi_init(dpu);
> > }
> >
> > diff --git a/drivers/gpu/drm/sprd/sprd_drm.c b/drivers/gpu/drm/sprd/sprd_drm.c
> > index 549b71278..68cf0933c 100644
> > --- a/drivers/gpu/drm/sprd/sprd_drm.c
> > +++ b/drivers/gpu/drm/sprd/sprd_drm.c
> > @@ -183,6 +183,7 @@ static struct platform_driver sprd_drm_driver = {
> > static struct platform_driver *sprd_drm_drivers[] = {
> > &sprd_drm_driver,
> > &sprd_dpu_driver,
> > + &sprd_dsi_driver,
> > };
> >
> > static int __init sprd_drm_init(void)
> > diff --git a/drivers/gpu/drm/sprd/sprd_drm.h b/drivers/gpu/drm/sprd/sprd_drm.h
> > index 85d4a8b9f..95d1b972f 100644
> > --- a/drivers/gpu/drm/sprd/sprd_drm.h
> > +++ b/drivers/gpu/drm/sprd/sprd_drm.h
> > @@ -14,5 +14,6 @@ struct sprd_drm {
> > };
> >
> > extern struct platform_driver sprd_dpu_driver;
> > +extern struct platform_driver sprd_dsi_driver;
> >
> > #endif /* _SPRD_DRM_H_ */
> > diff --git a/drivers/gpu/drm/sprd/sprd_dsi.c b/drivers/gpu/drm/sprd/sprd_dsi.c
> > new file mode 100644
> > index 000000000..5ce98fe90
> > --- /dev/null
> > +++ b/drivers/gpu/drm/sprd/sprd_dsi.c
> > @@ -0,0 +1,1260 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2020 Unisoc Inc.
> > + */
> > +
> > +#include <linux/component.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_graph.h>
> > +#include <video/mipi_display.h>
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_crtc_helper.h>
> > +#include <drm/drm_of.h>
> > +#include <drm/drm_probe_helper.h>
> > +
> > +#include "sprd_drm.h"
> > +#include "sprd_dpu.h"
> > +#include "sprd_dsi.h"
> > +
> > +#define SOFT_RESET 0x04
> > +#define MASK_PROTOCOL_INT 0x0C
> > +#define MASK_INTERNAL_INT 0x14
> > +#define DSI_MODE_CFG 0x18
> > +
> > +#define VIRTUAL_CHANNEL_ID 0x1C
> > +#define GEN_RX_VCID GENMASK(1, 0)
> > +#define VIDEO_PKT_VCID GENMASK(3, 2)
> > +
> > +#define DPI_VIDEO_FORMAT 0x20
> > +#define DPI_VIDEO_MODE_FORMAT GENMASK(5, 0)
> > +#define LOOSELY18_EN BIT(6)
> > +
> > +#define VIDEO_PKT_CONFIG 0x24
> > +#define VIDEO_PKT_SIZE GENMASK(15, 0)
> > +#define VIDEO_LINE_CHUNK_NUM GENMASK(31, 16)
> > +
> > +#define VIDEO_LINE_HBLK_TIME 0x28
> > +#define VIDEO_LINE_HBP_TIME GENMASK(15, 0)
> > +#define VIDEO_LINE_HSA_TIME GENMASK(31, 16)
> > +
> > +#define VIDEO_LINE_TIME 0x2C
> > +
> > +#define VIDEO_VBLK_LINES 0x30
> > +#define VFP_LINES GENMASK(9, 0)
> > +#define VBP_LINES GENMASK(19, 10)
> > +#define VSA_LINES GENMASK(29, 20)
> > +
> > +#define VIDEO_VACTIVE_LINES 0x34
> > +
> > +#define VID_MODE_CFG 0x38
> > +#define VID_MODE_TYPE GENMASK(1, 0)
> > +#define LP_VSA_EN BIT(8)
> > +#define LP_VBP_EN BIT(9)
> > +#define LP_VFP_EN BIT(10)
> > +#define LP_VACT_EN BIT(11)
> > +#define LP_HBP_EN BIT(12)
> > +#define LP_HFP_EN BIT(13)
> > +#define FRAME_BTA_ACK_EN BIT(14)
> > +#define LP_CMD_EN BIT(15)
> > +
> > +#define TIMEOUT_CNT_CLK_CONFIG 0x40
> > +#define HTX_TO_CONFIG 0x44
> > +#define LRX_H_TO_CONFIG 0x48
> > +
> > +#define TX_ESC_CLK_CONFIG 0x5C
> > +
> > +#define CMD_MODE_CFG 0x68
> > +#define TEAR_FX_EN BIT(0)
> > +#define ACK_RQST_EN BIT(1)
> > +#define PPS_TX BIT(5)
> > +#define EXQ_TX BIT(6)
> > +#define CMC_TX BIT(7)
> > +#define GEN_SW_0P_TX BIT(8)
> > +#define GEN_SW_1P_TX BIT(9)
> > +#define GEN_SW_2P_TX BIT(10)
> > +#define GEN_SR_0P_TX BIT(11)
> > +#define GEN_SR_1P_TX BIT(12)
> > +#define GEN_SR_2P_TX BIT(13)
> > +#define GEN_LW_TX BIT(14)
> > +#define DCS_SW_0P_TX BIT(16)
> > +#define DCS_SW_1P_TX BIT(17)
> > +#define DCS_SR_0P_TX BIT(18)
> > +#define DCS_LW_TX BIT(19)
> > +#define MAX_RD_PKT_SIZE BIT(24)
> > +
> > +#define GEN_HDR 0x6C
> > +#define GEN_DT GENMASK(5, 0)
> > +#define GEN_VC GENMASK(7, 6)
> > +#define GEN_WC_LSBYTE GENMASK(15, 8)
> > +#define GEN_WC_MSBYTE GENMASK(23, 16)
> > +
> > +#define GEN_PLD_DATA 0x70
> > +#define GEN_PLD_B1 GENMASK(7, 0)
> > +#define GEN_PLD_B2 GENMASK(15, 8)
> > +#define GEN_PLD_B3 GENMASK(23, 16)
> > +#define GEN_PLD_B4 GENMASK(31, 24)
> > +
> > +#define PHY_CLK_LANE_LP_CTRL 0x74
> > +#define PHY_CLKLANE_TX_REQ_HS BIT(0)
> > +#define AUTO_CLKLANE_CTRL_EN BIT(1)
> > +
> > +#define PHY_INTERFACE_CTRL 0x78
> > +#define RF_PHY_SHUTDOWN BIT(0)
> > +#define RF_PHY_RESET_N BIT(1)
> > +#define RF_PHY_CLK_EN BIT(2)
> > +
> > +#define CMD_MODE_STATUS 0x98
> > +#define GEN_CMD_RDCMD_ONGOING BIT(0)
> > +#define GEN_CMD_RDATA_FIFO_EMPTY BIT(1)
> > +#define GEN_CMD_RDATA_FIFO_FULL BIT(2)
> > +#define GEN_CMD_WDATA_FIFO_EMPTY BIT(3)
> > +#define GEN_CMD_WDATA_FIFO_FULL BIT(4)
> > +#define GEN_CMD_CMD_FIFO_EMPTY BIT(5)
> > +#define GEN_CMD_CMD_FIFO_FULL BIT(6)
> > +#define GEN_CMD_RDCMD_DONE BIT(7)
> > +
> > +#define PHY_STATUS 0x9C
> > +#define PHY_LOCK BIT(1)
> > +
> > +#define PHY_MIN_STOP_TIME 0xA0
> > +#define PHY_LANE_NUM_CONFIG 0xA4
> > +
> > +#define PHY_CLKLANE_TIME_CONFIG 0xA8
> > +#define PHY_CLKLANE_LP_TO_HS_TIME GENMASK(15, 0)
> > +#define PHY_CLKLANE_HS_TO_LP_TIME GENMASK(31, 16)
> > +
> > +#define PHY_DATALANE_TIME_CONFIG 0xAC
> > +#define PHY_DATALANE_LP_TO_HS_TIME GENMASK(15, 0)
> > +#define PHY_DATALANE_HS_TO_LP_TIME GENMASK(31, 16)
> > +
> > +#define MAX_READ_TIME 0xB0
> > +
> > +#define RX_PKT_CHECK_CONFIG 0xB4
> > +#define RX_PKT_ECC_EN BIT(0)
> > +#define RX_PKT_CRC_EN BIT(1)
> > +
> > +#define TA_EN 0xB8
> > +
> > +#define EOTP_EN 0xBC
> > +#define TX_EOTP_EN BIT(0)
> > +#define RX_EOTP_EN BIT(1)
> > +
> > +#define VIDEO_NULLPKT_SIZE 0xC0
> > +#define DCS_WM_PKT_SIZE 0xC4
> > +#define PROTOCOL_INT_CLR 0xC8
> > +#define INTERNAL_INT_CLR 0xCC
> > +
> > +#define VIDEO_SIG_DELAY_CONFIG 0xD0
> > +#define VIDEO_SIG_DELAY GENMASK(23, 0)
> > +#define VIDEO_SIG_DELAY_MODE BIT(24)
> > +
> > +#define PHY_TST_CTRL0 0xF0
> > +#define PHY_TESTCLR BIT(0)
> > +#define PHY_TESTCLK BIT(1)
> > +
> > +#define PHY_TST_CTRL1 0xF4
> > +#define PHY_TESTDIN GENMASK(7, 0)
> > +#define PHY_TESTDOUT GENMASK(15, 8)
> > +#define PHY_TESTEN BIT(16)
> > +
> > +#define host_to_dsi(host) \
> > + container_of(host, struct sprd_dsi, host)
> > +#define connector_to_dsi(connector) \
> > + container_of(connector, struct sprd_dsi, connector)
> > +
> > +static inline u32
> > +dsi_reg_rd(struct dsi_context *ctx, u32 offset, u32 mask,
> > + u32 shift)
> > +{
> > + return (readl(ctx->base + offset) & mask) >> shift;
> > +}
> > +
> > +static inline void
> > +dsi_reg_wr(struct dsi_context *ctx, u32 offset, u32 mask,
> > + u32 shift, u32 val)
> > +{
> > + u32 ret;
> > +
> > + ret = readl(ctx->base + offset);
> > + ret &= ~mask;
> > + ret |= (val << shift) & mask;
> > + writel(ret, ctx->base + offset);
> > +}
> > +
> > +static inline void
> > +dsi_reg_up(struct dsi_context *ctx, u32 offset, u32 mask,
> > + u32 val)
> > +{
> > + u32 ret = readl(ctx->base + offset);
> > +
> > + writel((ret & ~mask) | (val & mask), ctx->base + offset);
> > +}
> > +
> > +static int regmap_tst_io_write(void *context, u32 reg, u32 val)
> > +{
> > + struct sprd_dsi *dsi = context;
> > + struct dsi_context *ctx = &dsi->ctx;
> > +
> > + if (val > 0xff || reg > 0xff)
> > + return -EINVAL;
> > +
> > + drm_dbg(dsi->drm, "reg = 0x%02x, val = 0x%02x\n", reg, val);
> > +
> > + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, PHY_TESTEN);
> > + dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, reg);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
> > + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, 0);
> > + dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, val);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
> > +
> > + return 0;
> > +}
> > +
> > +static int regmap_tst_io_read(void *context, u32 reg, u32 *val)
> > +{
> > + struct sprd_dsi *dsi = context;
> > + struct dsi_context *ctx = &dsi->ctx;
> > + int ret;
> > +
> > + if (reg > 0xff)
> > + return -EINVAL;
> > +
> > + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, PHY_TESTEN);
> > + dsi_reg_wr(ctx, PHY_TST_CTRL1, PHY_TESTDIN, 0, reg);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, PHY_TESTCLK);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLK, 0);
> > + dsi_reg_up(ctx, PHY_TST_CTRL1, PHY_TESTEN, 0);
> > +
> > + udelay(1);
> > +
> > + ret = dsi_reg_rd(ctx, PHY_TST_CTRL1, PHY_TESTDOUT, 8);
> > + if (ret < 0)
> > + return ret;
> > +
> > + *val = ret;
> > +
> > + drm_dbg(dsi->drm, "reg = 0x%02x, val = 0x%02x\n", reg, *val);
> > + return 0;
> > +}
> > +
> > +static struct regmap_bus regmap_tst_io = {
> > + .reg_write = regmap_tst_io_write,
> > + .reg_read = regmap_tst_io_read,
> > +};
> > +
> > +static const struct regmap_config byte_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > +};
> > +
> > +static int dphy_wait_pll_locked(struct dsi_context *ctx)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + int i;
> > +
> > + for (i = 0; i < 50000; i++) {
> > + if (dsi_reg_rd(ctx, PHY_STATUS, PHY_LOCK, 1))
> > + return 0;
> > + udelay(3);
> > + }
> > +
> > + drm_err(dsi->drm, "dphy pll can not be locked\n");
> > + return -ETIMEDOUT;
> > +}
> > +
> > +static int dsi_wait_tx_payload_fifo_empty(struct dsi_context *ctx)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < 5000; i++) {
> > + if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_WDATA_FIFO_EMPTY, 3))
> > + return 0;
> > + udelay(1);
> > + }
> > +
> > + return -ETIMEDOUT;
> > +}
> > +
> > +static int dsi_wait_tx_cmd_fifo_empty(struct dsi_context *ctx)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < 5000; i++) {
> > + if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_CMD_FIFO_EMPTY, 5))
> > + return 0;
> > + udelay(1);
> > + }
> > +
> > + return -ETIMEDOUT;
> > +}
> > +
> > +static int dsi_wait_rd_resp_completed(struct dsi_context *ctx)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < 10000; i++) {
> > + if (dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDCMD_DONE, 7))
> > + return 0;
> > + udelay(10);
> > + }
> > +
> > + return -ETIMEDOUT;
> > +}
> > +
> > +static u16 calc_bytes_per_pixel_x100(int coding)
> > +{
> > + u16 Bpp_x100;
> > +
> > + switch (coding) {
> > + case COLOR_CODE_16BIT_CONFIG1:
> > + case COLOR_CODE_16BIT_CONFIG2:
> > + case COLOR_CODE_16BIT_CONFIG3:
> > + Bpp_x100 = 200;
> > + break;
> > + case COLOR_CODE_18BIT_CONFIG1:
> > + case COLOR_CODE_18BIT_CONFIG2:
> > + Bpp_x100 = 225;
> > + break;
> > + case COLOR_CODE_24BIT:
> > + Bpp_x100 = 300;
> > + break;
> > + case COLOR_CODE_COMPRESSTION:
> > + Bpp_x100 = 100;
> > + break;
> > + case COLOR_CODE_20BIT_YCC422_LOOSELY:
> > + Bpp_x100 = 250;
> > + break;
> > + case COLOR_CODE_24BIT_YCC422:
> > + Bpp_x100 = 300;
> > + break;
> > + case COLOR_CODE_16BIT_YCC422:
> > + Bpp_x100 = 200;
> > + break;
> > + case COLOR_CODE_30BIT:
> > + Bpp_x100 = 375;
> > + break;
> > + case COLOR_CODE_36BIT:
> > + Bpp_x100 = 450;
> > + break;
> > + case COLOR_CODE_12BIT_YCC420:
> > + Bpp_x100 = 150;
> > + break;
> > + default:
> > + DRM_ERROR("invalid color coding");
> > + Bpp_x100 = 0;
> > + break;
> > + }
> > +
> > + return Bpp_x100;
> > +}
> > +
> > +static u8 calc_video_size_step(int coding)
> > +{
> > + u8 video_size_step;
> > +
> > + switch (coding) {
> > + case COLOR_CODE_16BIT_CONFIG1:
> > + case COLOR_CODE_16BIT_CONFIG2:
> > + case COLOR_CODE_16BIT_CONFIG3:
> > + case COLOR_CODE_18BIT_CONFIG1:
> > + case COLOR_CODE_18BIT_CONFIG2:
> > + case COLOR_CODE_24BIT:
> > + case COLOR_CODE_COMPRESSTION:
> > + return video_size_step = 1;
> > + case COLOR_CODE_20BIT_YCC422_LOOSELY:
> > + case COLOR_CODE_24BIT_YCC422:
> > + case COLOR_CODE_16BIT_YCC422:
> > + case COLOR_CODE_30BIT:
> > + case COLOR_CODE_36BIT:
> > + case COLOR_CODE_12BIT_YCC420:
> > + return video_size_step = 2;
> > + default:
> > + DRM_ERROR("invalid color coding");
> > + return 0;
> > + }
> > +}
> > +
> > +static u16 round_video_size(int coding, u16 video_size)
> > +{
> > + switch (coding) {
> > + case COLOR_CODE_16BIT_YCC422:
> > + case COLOR_CODE_24BIT_YCC422:
> > + case COLOR_CODE_20BIT_YCC422_LOOSELY:
> > + case COLOR_CODE_12BIT_YCC420:
> > + /* round up active H pixels to a multiple of 2 */
> > + if ((video_size % 2) != 0)
> > + video_size += 1;
> > + break;
> > + default:
> > + break;
> > + }
> > +
> > + return video_size;
> > +}
> > +
> > +#define SPRD_MIPI_DSI_FMT_DSC 0xff
> > +static u32 fmt_to_coding(u32 fmt)
> > +{
> > + switch (fmt) {
> > + case MIPI_DSI_FMT_RGB565:
> > + return COLOR_CODE_16BIT_CONFIG1;
> > + case MIPI_DSI_FMT_RGB666:
> > + case MIPI_DSI_FMT_RGB666_PACKED:
> > + return COLOR_CODE_18BIT_CONFIG1;
> > + case MIPI_DSI_FMT_RGB888:
> > + return COLOR_CODE_24BIT;
> > + case SPRD_MIPI_DSI_FMT_DSC:
> > + return COLOR_CODE_COMPRESSTION;
> > + default:
> > + DRM_ERROR("Unsupported format (%d)\n", fmt);
> > + return COLOR_CODE_24BIT;
> > + }
> > +}
> > +
> > +#define ns_to_cycle(ns, byte_clk) \
> > + DIV_ROUND_UP((ns) * (byte_clk), 1000000)
> > +
> > +static void sprd_dsi_init(struct dsi_context *ctx)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + u32 byte_clk = dsi->slave->hs_rate / 8;
> > + u16 data_hs2lp, data_lp2hs, clk_hs2lp, clk_lp2hs;
> > + u16 max_rd_time;
> > + int div;
> > +
> > + writel(0, ctx->base + SOFT_RESET);
> > + writel(0xffffffff, ctx->base + MASK_PROTOCOL_INT);
> > + writel(0xffffffff, ctx->base + MASK_INTERNAL_INT);
> > + writel(1, ctx->base + DSI_MODE_CFG);
> > + dsi_reg_up(ctx, EOTP_EN, RX_EOTP_EN, 0);
> > + dsi_reg_up(ctx, EOTP_EN, TX_EOTP_EN, 0);
> > + dsi_reg_up(ctx, RX_PKT_CHECK_CONFIG, RX_PKT_ECC_EN, RX_PKT_ECC_EN);
> > + dsi_reg_up(ctx, RX_PKT_CHECK_CONFIG, RX_PKT_CRC_EN, RX_PKT_CRC_EN);
> > + writel(1, ctx->base + TA_EN);
> > + dsi_reg_up(ctx, VIRTUAL_CHANNEL_ID, VIDEO_PKT_VCID, 0);
> > + dsi_reg_up(ctx, VIRTUAL_CHANNEL_ID, GEN_RX_VCID, 0);
> > +
> > + div = DIV_ROUND_UP(byte_clk, dsi->slave->lp_rate);
> > + writel(div, ctx->base + TX_ESC_CLK_CONFIG);
> > +
> > + max_rd_time = ns_to_cycle(ctx->max_rd_time, byte_clk);
> > + writel(max_rd_time, ctx->base + MAX_READ_TIME);
> > +
> > + data_hs2lp = ns_to_cycle(ctx->data_hs2lp, byte_clk);
> > + data_lp2hs = ns_to_cycle(ctx->data_lp2hs, byte_clk);
> > + clk_hs2lp = ns_to_cycle(ctx->clk_hs2lp, byte_clk);
> > + clk_lp2hs = ns_to_cycle(ctx->clk_lp2hs, byte_clk);
> > + dsi_reg_wr(ctx, PHY_DATALANE_TIME_CONFIG,
> > + PHY_DATALANE_HS_TO_LP_TIME, 16, data_hs2lp);
> > + dsi_reg_wr(ctx, PHY_DATALANE_TIME_CONFIG,
> > + PHY_DATALANE_LP_TO_HS_TIME, 0, data_lp2hs);
> > + dsi_reg_wr(ctx, PHY_CLKLANE_TIME_CONFIG,
> > + PHY_CLKLANE_HS_TO_LP_TIME, 16, clk_hs2lp);
> > + dsi_reg_wr(ctx, PHY_CLKLANE_TIME_CONFIG,
> > + PHY_CLKLANE_LP_TO_HS_TIME, 0, clk_lp2hs);
> > +
> > + writel(1, ctx->base + SOFT_RESET);
> > +}
> > +
> > +/*
> > + * Free up resources and shutdown host controller and PHY
> > + */
> > +static void sprd_dsi_fini(struct dsi_context *ctx)
> > +{
> > + writel(0xffffffff, ctx->base + MASK_PROTOCOL_INT);
> > + writel(0xffffffff, ctx->base + MASK_INTERNAL_INT);
> > + writel(0, ctx->base + SOFT_RESET);
> > +}
> > +
> > +/*
> > + * If not in burst mode, it will compute the video and null packet sizes
> > + * according to necessity.
> > + * Configure timers for data lanes and/or clock lane to return to LP when
> > + * bandwidth is not filled by data.
> > + */
> > +static int sprd_dsi_dpi_video(struct dsi_context *ctx)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + struct videomode *vm = &ctx->vm;
> > + u32 byte_clk = dsi->slave->hs_rate / 8;
> > + u16 Bpp_x100;
> > + u16 video_size;
> > + u32 ratio_x1000;
> > + u16 null_pkt_size = 0;
> > + u8 video_size_step;
> > + u32 hs_to;
> > + u32 total_bytes;
> > + u32 bytes_per_chunk;
> > + u32 chunks = 0;
> > + u32 bytes_left = 0;
> > + u32 chunk_overhead;
> > + const u8 pkt_header = 6;
> > + u8 coding;
> > + int div;
> > + u16 hline;
> > + u16 byte_cycle;
> > +
> > + coding = fmt_to_coding(dsi->slave->format);
> > + video_size = round_video_size(coding, vm->hactive);
> > + Bpp_x100 = calc_bytes_per_pixel_x100(coding);
> > + video_size_step = calc_video_size_step(coding);
> > + ratio_x1000 = byte_clk * 1000 / (vm->pixelclock / 1000);
> > + hline = vm->hactive + vm->hsync_len + vm->hfront_porch +
> > + vm->hback_porch;
> > +
> > + writel(0, ctx->base + SOFT_RESET);
> > + dsi_reg_wr(ctx, VID_MODE_CFG, FRAME_BTA_ACK_EN, 15, ctx->frame_ack_en);
> > + dsi_reg_wr(ctx, DPI_VIDEO_FORMAT, DPI_VIDEO_MODE_FORMAT, 0, coding);
> > + dsi_reg_wr(ctx, VID_MODE_CFG, VID_MODE_TYPE, 0, ctx->burst_mode);
> > + byte_cycle = 95 * hline * ratio_x1000 / 100000;
> > + dsi_reg_wr(ctx, VIDEO_SIG_DELAY_CONFIG, VIDEO_SIG_DELAY, 0, byte_cycle);
> > + byte_cycle = hline * ratio_x1000 / 1000;
> > + writel(byte_cycle, ctx->base + VIDEO_LINE_TIME);
> > + byte_cycle = vm->hsync_len * ratio_x1000 / 1000;
> > + dsi_reg_wr(ctx, VIDEO_LINE_HBLK_TIME, VIDEO_LINE_HSA_TIME, 16, byte_cycle);
> > + byte_cycle = vm->hback_porch * ratio_x1000 / 1000;
> > + dsi_reg_wr(ctx, VIDEO_LINE_HBLK_TIME, VIDEO_LINE_HBP_TIME, 0, byte_cycle);
> > + writel(vm->vactive, ctx->base + VIDEO_VACTIVE_LINES);
> > + dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VFP_LINES, 0, vm->vfront_porch);
> > + dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VBP_LINES, 10, vm->vback_porch);
> > + dsi_reg_wr(ctx, VIDEO_VBLK_LINES, VSA_LINES, 20, vm->vsync_len);
> > + dsi_reg_up(ctx, VID_MODE_CFG, LP_HBP_EN | LP_HFP_EN | LP_VACT_EN |
> > + LP_VFP_EN | LP_VBP_EN | LP_VSA_EN, LP_HBP_EN | LP_HFP_EN |
> > + LP_VACT_EN | LP_VFP_EN | LP_VBP_EN | LP_VSA_EN);
> > +
> > + hs_to = (hline * vm->vactive) + (2 * Bpp_x100) / 100;
> > + for (div = 0x80; (div < hs_to) && (div > 2); div--) {
> > + if ((hs_to % div) == 0) {
> > + writel(div, ctx->base + TIMEOUT_CNT_CLK_CONFIG);
> > + writel(hs_to / div, ctx->base + LRX_H_TO_CONFIG);
> > + writel(hs_to / div, ctx->base + HTX_TO_CONFIG);
> > + break;
> > + }
> > + }
> > +
> > + if (ctx->burst_mode == VIDEO_BURST_WITH_SYNC_PULSES) {
> > + dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_PKT_SIZE, 0, video_size);
> > + writel(0, ctx->base + VIDEO_NULLPKT_SIZE);
> > + dsi_reg_up(ctx, VIDEO_PKT_CONFIG, VIDEO_LINE_CHUNK_NUM, 0);
> > + } else {
> > + /* non burst transmission */
> > + null_pkt_size = 0;
> > +
> > + /* bytes to be sent - first as one chunk */
> > + bytes_per_chunk = vm->hactive * Bpp_x100 / 100 + pkt_header;
> > +
> > + /* hline total bytes from the DPI interface */
> > + total_bytes = (vm->hactive + vm->hfront_porch) *
> > + ratio_x1000 / dsi->slave->lanes / 1000;
> > +
> > + /* check if the pixels actually fit on the DSI link */
> > + if (total_bytes < bytes_per_chunk) {
> > + drm_err(dsi->drm, "current resolution can not be set\n");
> > + return -EINVAL;
> > + }
> > +
> > + chunk_overhead = total_bytes - bytes_per_chunk;
> > +
> > + /* overhead higher than 1 -> enable multi packets */
> > + if (chunk_overhead > 1) {
> > +
> > + /* multi packets */
> > + for (video_size = video_size_step;
> > + video_size < vm->hactive;
> > + video_size += video_size_step) {
> > +
> > + if (vm->hactive * 1000 / video_size % 1000)
> > + continue;
> > +
> > + chunks = vm->hactive / video_size;
> > + bytes_per_chunk = Bpp_x100 * video_size / 100
> > + + pkt_header;
> > + if (total_bytes >= (bytes_per_chunk * chunks)) {
> > + bytes_left = total_bytes -
> > + bytes_per_chunk * chunks;
> > + break;
> > + }
> > + }
> > +
> > + /* prevent overflow (unsigned - unsigned) */
> > + if (bytes_left > (pkt_header * chunks)) {
> > + null_pkt_size = (bytes_left -
> > + pkt_header * chunks) / chunks;
> > + /* avoid register overflow */
> > + if (null_pkt_size > 1023)
> > + null_pkt_size = 1023;
> > + }
> > +
> > + } else {
> > +
> > + /* single packet */
> > + chunks = 1;
> > +
> > + /* must be a multiple of 4 except 18 loosely */
> > + for (video_size = vm->hactive;
> > + (video_size % video_size_step) != 0;
> > + video_size++)
> > + ;
> > + }
> > +
> > + dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_PKT_SIZE, 0, video_size);
> > + writel(null_pkt_size, ctx->base + VIDEO_NULLPKT_SIZE);
> > + dsi_reg_wr(ctx, VIDEO_PKT_CONFIG, VIDEO_LINE_CHUNK_NUM, 16, chunks);
> > + }
> > +
> > + writel(ctx->int0_mask, ctx->base + MASK_PROTOCOL_INT);
> > + writel(ctx->int1_mask, ctx->base + MASK_INTERNAL_INT);
> > + writel(1, ctx->base + SOFT_RESET);
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_dsi_edpi_video(struct dsi_context *ctx)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + const u32 fifo_depth = 1096;
> > + const u32 word_length = 4;
> > + u32 hactive = ctx->vm.hactive;
> > + u32 Bpp_x100;
> > + u32 max_fifo_len;
> > + u8 coding;
> > +
> > + coding = fmt_to_coding(dsi->slave->format);
> > + Bpp_x100 = calc_bytes_per_pixel_x100(coding);
> > + max_fifo_len = word_length * fifo_depth * 100 / Bpp_x100;
> > +
> > + writel(0, ctx->base + SOFT_RESET);
> > + dsi_reg_wr(ctx, DPI_VIDEO_FORMAT, DPI_VIDEO_MODE_FORMAT, 0, coding);
> > + dsi_reg_wr(ctx, CMD_MODE_CFG, TEAR_FX_EN, 0, ctx->te_ack_en);
> > +
> > + if (max_fifo_len > hactive)
> > + writel(hactive, ctx->base + DCS_WM_PKT_SIZE);
> > + else
> > + writel(max_fifo_len, ctx->base + DCS_WM_PKT_SIZE);
> > +
> > + writel(ctx->int0_mask, ctx->base + MASK_PROTOCOL_INT);
> > + writel(ctx->int1_mask, ctx->base + MASK_INTERNAL_INT);
> > + writel(1, ctx->base + SOFT_RESET);
> > +}
> > +
> > +/*
> > + * Send a packet on the generic interface,
> > + * this function has an active delay to wait for the buffer to clear.
> > + * The delay is limited to:
> > + * (param_length / 4) x DSIH_FIFO_ACTIVE_WAIT x register access time
> > + * the controller restricts the sending of.
> > + *
> > + * This function will not be able to send Null and Blanking packets due to
> > + * controller restriction
> > + */
> > +static int sprd_dsi_wr_pkt(struct dsi_context *ctx, u8 vc, u8 type,
> > + const u8 *param, u16 len)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + u8 wc_lsbyte, wc_msbyte;
> > + u32 payload;
> > + int i, j, ret;
> > +
> > + if (vc > 3)
> > + return -EINVAL;
> > +
> > +
> > + /* 1st: for long packet, must config payload first */
> > + ret = dsi_wait_tx_payload_fifo_empty(ctx);
> > + if (ret) {
> > + drm_err(dsi->drm, "tx payload fifo is not empty\n");
> > + return ret;
> > + }
> > +
> > + if (len > 2) {
> > + for (i = 0, j = 0; i < len; i += j) {
> > + payload = 0;
> > + for (j = 0; (j < 4) && ((j + i) < (len)); j++)
> > + payload |= param[i + j] << (j * 8);
> > +
> > + writel(payload, ctx->base + GEN_PLD_DATA);
> > + }
> > + wc_lsbyte = len & 0xff;
> > + wc_msbyte = len >> 8;
> > + } else {
> > + wc_lsbyte = (len > 0) ? param[0] : 0;
> > + wc_msbyte = (len > 1) ? param[1] : 0;
> > + }
> > +
> > + /* 2nd: then set packet header */
> > + ret = dsi_wait_tx_cmd_fifo_empty(ctx);
> > + if (ret) {
> > + drm_err(dsi->drm, "tx cmd fifo is not empty\n");
> > + return ret;
> > + }
> > +
> > + writel(type | (vc << 6) | (wc_lsbyte << 8) | (wc_msbyte << 16),
> > + ctx->base + GEN_HDR);
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Send READ packet to peripheral using the generic interface,
> > + * this will force command mode and stop video mode (because of BTA).
> > + *
> > + * This function has an active delay to wait for the buffer to clear,
> > + * the delay is limited to 2 x DSIH_FIFO_ACTIVE_WAIT
> > + * (waiting for command buffer, and waiting for receiving)
> > + * @note this function will enable BTA
> > + */
> > +static int sprd_dsi_rd_pkt(struct dsi_context *ctx, u8 vc, u8 type,
> > + u8 msb_byte, u8 lsb_byte,
> > + u8 *buffer, u8 bytes_to_read)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + int i, ret;
> > + int count = 0;
> > + u32 temp;
> > +
> > + if (vc > 3)
> > + return -EINVAL;
> > +
> > + /* 1st: send read command to peripheral */
> > + ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_CMD_FIFO_EMPTY, 5);
> > + if (!ret)
> > + return -EIO;
> > +
> > + writel(type | (vc << 6) | (lsb_byte << 8) | (msb_byte << 16),
> > + ctx->base + GEN_HDR);
> > +
> > + /* 2nd: wait peripheral response completed */
> > + ret = dsi_wait_rd_resp_completed(ctx);
> > + if (ret) {
> > + drm_err(dsi->drm, "wait read response time out\n");
> > + return ret;
> > + }
> > +
> > + /* 3rd: get data from rx payload fifo */
> > + ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDATA_FIFO_EMPTY, 1);
> > + if (ret) {
> > + drm_err(dsi->drm, "rx payload fifo empty\n");
> > + return -EIO;
> > + }
> > +
> > + for (i = 0; i < 100; i++) {
> > + temp = readl(ctx->base + GEN_PLD_DATA);
> > +
> > + if (count < bytes_to_read)
> > + buffer[count++] = temp & 0xff;
> > + if (count < bytes_to_read)
> > + buffer[count++] = (temp >> 8) & 0xff;
> > + if (count < bytes_to_read)
> > + buffer[count++] = (temp >> 16) & 0xff;
> > + if (count < bytes_to_read)
> > + buffer[count++] = (temp >> 24) & 0xff;
> > +
> > + ret = dsi_reg_rd(ctx, CMD_MODE_STATUS, GEN_CMD_RDATA_FIFO_EMPTY, 1);
> > + if (ret)
> > + return count;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_dsi_set_work_mode(struct dsi_context *ctx, u8 mode)
> > +{
> > + if (mode == DSI_MODE_CMD)
> > + writel(1, ctx->base + DSI_MODE_CFG);
> > + else
> > + writel(0, ctx->base + DSI_MODE_CFG);
> > +}
> > +
> > +static void sprd_dsi_lp_cmd_enable(struct dsi_context *ctx)
> > +{
> > + if (readl(ctx->base + DSI_MODE_CFG))
> > + dsi_reg_up(ctx, CMD_MODE_CFG, GEN_SW_0P_TX | GEN_SW_1P_TX |
> > + GEN_SW_2P_TX | GEN_SR_0P_TX | GEN_SR_1P_TX | GEN_SR_2P_TX |
> > + GEN_LW_TX | DCS_SW_0P_TX | DCS_SW_1P_TX | DCS_SR_0P_TX |
> > + DCS_LW_TX | MAX_RD_PKT_SIZE, GEN_SW_0P_TX | GEN_SW_1P_TX |
> > + GEN_SW_2P_TX | GEN_SR_0P_TX | GEN_SR_1P_TX | GEN_SR_2P_TX |
> > + GEN_LW_TX | DCS_SW_0P_TX | DCS_SW_1P_TX | DCS_SR_0P_TX |
> > + DCS_LW_TX | MAX_RD_PKT_SIZE);
> > + else
> > + dsi_reg_up(ctx, VID_MODE_CFG, LP_CMD_EN, LP_CMD_EN);
> > +}
> > +
> > +static void sprd_dsi_state_reset(struct dsi_context *ctx)
> > +{
> > + writel(0, ctx->base + SOFT_RESET);
> > + udelay(100);
> > + writel(1, ctx->base + SOFT_RESET);
> > +}
> > +
> > +static int sprd_dphy_init(struct dsi_context *ctx)
> > +{
> > + struct sprd_dsi *dsi = container_of(ctx, struct sprd_dsi, ctx);
> > + int ret;
> > +
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, 0);
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, 0);
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_CLK_EN, 0);
> > +
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, 0);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, PHY_TESTCLR);
> > + dsi_reg_up(ctx, PHY_TST_CTRL0, PHY_TESTCLR, 0);
> > +
> > + dphy_pll_config(ctx);
> > + dphy_timing_config(ctx);
> > +
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, RF_PHY_SHUTDOWN);
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, RF_PHY_RESET_N);
> > + writel(0x1C, ctx->base + PHY_MIN_STOP_TIME);
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_CLK_EN, RF_PHY_CLK_EN);
> > + writel(dsi->slave->lanes - 1, ctx->base + PHY_LANE_NUM_CONFIG);
> > +
> > + ret = dphy_wait_pll_locked(ctx);
> > + if (ret) {
> > + drm_err(dsi->drm, "dphy initial failed\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_dphy_fini(struct dsi_context *ctx)
> > +{
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, 0);
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_SHUTDOWN, 0);
> > + dsi_reg_up(ctx, PHY_INTERFACE_CTRL, RF_PHY_RESET_N, RF_PHY_RESET_N);
> > +}
> > +
> > +static void sprd_dsi_encoder_enable(struct drm_encoder *encoder)
> > +{
> > + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> > + struct sprd_dpu *dpu = to_sprd_crtc(encoder->crtc);
> > + struct dsi_context *ctx = &dsi->ctx;
> > +
> > + if (ctx->enabled) {
> > + drm_warn(dsi->drm, "dsi is initialized\n");
> > + return;
> > + }
> > +
> > + sprd_dsi_init(ctx);
> > + if (ctx->work_mode == DSI_MODE_VIDEO)
> > + sprd_dsi_dpi_video(ctx);
> > + else
> > + sprd_dsi_edpi_video(ctx);
> > +
> > + sprd_dphy_init(ctx);
> > +
> > + sprd_dsi_lp_cmd_enable(ctx);
> > +
> > + if (dsi->panel) {
> > + drm_panel_prepare(dsi->panel);
> > + drm_panel_enable(dsi->panel);
> > + }
>
> Please use the new devm_drm_of_get_bridge helper here, and use the
> bridge API instead.
We use drm_panel_init and drm_panel_add API to add panel, so here is a
panel device, not a bridge.
>
> > + sprd_dsi_set_work_mode(ctx, ctx->work_mode);
> > + sprd_dsi_state_reset(ctx);
> > +
> > + if (dsi->slave->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS)
> > + dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, AUTO_CLKLANE_CTRL_EN,
> > + AUTO_CLKLANE_CTRL_EN);
> > + else {
> > + dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, RF_PHY_CLK_EN, RF_PHY_CLK_EN);
> > + dsi_reg_up(ctx, PHY_CLK_LANE_LP_CTRL, PHY_CLKLANE_TX_REQ_HS,
> > + PHY_CLKLANE_TX_REQ_HS);
> > + dphy_wait_pll_locked(ctx);
> > + }
> > +
> > + sprd_dpu_run(dpu);
> > +
> > + ctx->enabled = true;
> > +}
> > +
> > +static void sprd_dsi_encoder_disable(struct drm_encoder *encoder)
> > +{
> > + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> > + struct sprd_dpu *dpu = to_sprd_crtc(encoder->crtc);
> > + struct dsi_context *ctx = &dsi->ctx;
> > +
> > + if (!ctx->enabled) {
> > + drm_warn(dsi->drm, "dsi isn't initialized\n");
> > + return;
> > + }
> > +
> > + sprd_dpu_stop(dpu);
> > + sprd_dsi_set_work_mode(ctx, DSI_MODE_CMD);
> > + sprd_dsi_lp_cmd_enable(ctx);
> > +
> > + if (dsi->panel) {
> > + drm_panel_disable(dsi->panel);
> > + drm_panel_unprepare(dsi->panel);
> > + }
> > +
> > + sprd_dphy_fini(ctx);
> > + sprd_dsi_fini(ctx);
> > +
> > + ctx->enabled = false;
> > +}
> > +
> > +static void sprd_dsi_encoder_mode_set(struct drm_encoder *encoder,
> > + struct drm_display_mode *mode,
> > + struct drm_display_mode *adj_mode)
> > +{
> > + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> > +
> > + drm_dbg(dsi->drm, "%s() set mode: %s\n", __func__, dsi->mode->name);
> > +}
>
> You don't need that function?
No need for now. need to delete it?
>
> > +static int sprd_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> > + struct drm_crtc_state *crtc_state,
> > + struct drm_connector_state *conn_state)
> > +{
> > + return 0;
> > +}
>
> Ditto
No need for now. need to delete it?
>
> > +static const struct drm_encoder_helper_funcs sprd_encoder_helper_funcs = {
> > + .atomic_check = sprd_dsi_encoder_atomic_check,
> > + .mode_set = sprd_dsi_encoder_mode_set,
> > + .enable = sprd_dsi_encoder_enable,
> > + .disable = sprd_dsi_encoder_disable
> > +};
> > +
> > +static const struct drm_encoder_funcs sprd_encoder_funcs = {
> > + .destroy = drm_encoder_cleanup,
> > +};
> > +
> > +static struct sprd_dsi *sprd_dsi_encoder_init(struct drm_device *drm,
> > + struct device *dev)
> > +{
> > + struct sprd_dsi *dsi;
> > + u32 crtc_mask;
> > +
> > + crtc_mask = drm_of_find_possible_crtcs(drm, dev->of_node);
> > + if (!crtc_mask) {
> > + drm_err(drm, "failed to find crtc mask\n");
> > + return ERR_PTR(-EINVAL);
> > + }
> > +
> > + drm_dbg(drm, "find possible crtcs: 0x%08x\n", crtc_mask);
> > +
> > + dsi = drmm_encoder_alloc(drm, struct sprd_dsi, encoder,
> > + &sprd_encoder_funcs, DRM_MODE_ENCODER_DSI, NULL);
> > + if (IS_ERR(dsi)) {
> > + drm_err(drm, "failed to init dsi encoder.\n");
> > + return dsi;
> > + }
> > +
> > + dsi->encoder.possible_crtcs = crtc_mask;
> > + drm_encoder_helper_add(&dsi->encoder, &sprd_encoder_helper_funcs);
> > +
> > + return dsi;
> > +}
> > +
> > +static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
> > +{
> > + struct device *dev = dsi->host.dev;
> > + struct device_node *child, *lcds_node;
> > + struct drm_panel *panel;
> > +
> > + /* search /lcds child node first */
> > + lcds_node = of_find_node_by_path("/lcds");
> > + for_each_child_of_node(lcds_node, child) {
> > + panel = of_drm_find_panel(child);
> > + if (!IS_ERR(panel)) {
> > + dsi->panel = panel;
> > + return 0;
> > + }
> > + }
> > +
> > + /*
> > + * If /lcds child node search failed, we search
> > + * the child of dsi host node.
> > + */
> > + for_each_child_of_node(dev->of_node, child) {
> > + panel = of_drm_find_panel(child);
> > + if (!IS_ERR(panel)) {
> > + dsi->panel = panel;
> > + return 0;
> > + }
> > + }
> > +
> > + drm_err(dsi->drm, "of_drm_find_panel() failed\n");
> > + return -ENODEV;
> > +}
>
> Just use devm_drm_of_get_bridge there
We use drm_panel_init and drm_panel_add API to add panel, so here is a
panel device, not a bridge.
>
> > +static int sprd_dsi_host_attach(struct mipi_dsi_host *host,
> > + struct mipi_dsi_device *slave)
> > +{
> > + struct sprd_dsi *dsi = host_to_dsi(host);
> > + struct dsi_context *ctx = &dsi->ctx;
> > + int ret;
> > +
> > + dsi->slave = slave;
> > +
> > + if (slave->mode_flags & MIPI_DSI_MODE_VIDEO)
> > + ctx->work_mode = DSI_MODE_VIDEO;
> > + else
> > + ctx->work_mode = DSI_MODE_CMD;
> > +
> > + if (slave->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> > + ctx->burst_mode = VIDEO_BURST_WITH_SYNC_PULSES;
> > + else if (slave->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> > + ctx->burst_mode = VIDEO_NON_BURST_WITH_SYNC_PULSES;
> > + else
> > + ctx->burst_mode = VIDEO_NON_BURST_WITH_SYNC_EVENTS;
> > +
> > + ret = sprd_dsi_find_panel(dsi);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static int sprd_dsi_host_detach(struct mipi_dsi_host *host,
> > + struct mipi_dsi_device *slave)
> > +{
> > + /* do nothing */
> > + return 0;
> > +}
> > +
> > +static ssize_t sprd_dsi_host_transfer(struct mipi_dsi_host *host,
> > + const struct mipi_dsi_msg *msg)
> > +{
> > + struct sprd_dsi *dsi = host_to_dsi(host);
> > + const u8 *tx_buf = msg->tx_buf;
> > +
> > + if (msg->rx_buf && msg->rx_len) {
> > + u8 lsb = (msg->tx_len > 0) ? tx_buf[0] : 0;
> > + u8 msb = (msg->tx_len > 1) ? tx_buf[1] : 0;
> > +
> > + return sprd_dsi_rd_pkt(&dsi->ctx, msg->channel, msg->type,
> > + msb, lsb, msg->rx_buf, msg->rx_len);
> > + }
> > +
> > + if (msg->tx_buf && msg->tx_len)
> > + return sprd_dsi_wr_pkt(&dsi->ctx, msg->channel, msg->type,
> > + tx_buf, msg->tx_len);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct mipi_dsi_host_ops sprd_dsi_host_ops = {
> > + .attach = sprd_dsi_host_attach,
> > + .detach = sprd_dsi_host_detach,
> > + .transfer = sprd_dsi_host_transfer,
> > +};
> > +
> > +static int sprd_dsi_host_init(struct sprd_dsi *dsi, struct device *dev)
> > +{
> > + int ret;
> > +
> > + dsi->host.dev = dev;
> > + dsi->host.ops = &sprd_dsi_host_ops;
> > +
> > + ret = mipi_dsi_host_register(&dsi->host);
> > + if (ret)
> > + drm_err(dsi->drm, "failed to register dsi host\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int sprd_dsi_connector_get_modes(struct drm_connector *connector)
> > +{
> > + struct sprd_dsi *dsi = connector_to_dsi(connector);
> > +
> > + return drm_panel_get_modes(dsi->panel, connector);
> > +}
> > +
> > +static enum drm_mode_status
> > +sprd_dsi_connector_mode_valid(struct drm_connector *connector,
> > + struct drm_display_mode *mode)
> > +{
> > + struct sprd_dsi *dsi = connector_to_dsi(connector);
> > +
> > + drm_dbg(dsi->drm, "%s() mode: "DRM_MODE_FMT"\n", __func__, DRM_MODE_ARG(mode));
> > +
> > + if (mode->type & DRM_MODE_TYPE_PREFERRED) {
> > + dsi->mode = mode;
> > + drm_display_mode_to_videomode(dsi->mode, &dsi->ctx.vm);
> > + }
>
> I already told you this, but you shouldn't modify your state in
> mode_valid, and certainly not based on whether it's the preferred mode
> or not.
Sorry, I have modified the CRTC driver, and the encoder driver is
missing, i will fix it, thks.
>
> > + return MODE_OK;
> > +}
> > +
> > +static struct drm_encoder *
> > +sprd_dsi_connector_best_encoder(struct drm_connector *connector)
> > +{
> > + struct sprd_dsi *dsi = connector_to_dsi(connector);
> > +
> > + return &dsi->encoder;
> > +}
> > +
> > +static struct drm_connector_helper_funcs sprd_dsi_connector_helper_funcs = {
> > + .get_modes = sprd_dsi_connector_get_modes,
> > + .mode_valid = sprd_dsi_connector_mode_valid,
> > + .best_encoder = sprd_dsi_connector_best_encoder,
> > +};
> > +
> > +static enum drm_connector_status
> > +sprd_dsi_connector_detect(struct drm_connector *connector, bool force)
> > +{
> > + struct sprd_dsi *dsi = connector_to_dsi(connector);
> > +
> > + if (dsi->panel) {
> > + drm_panel_add(dsi->panel);
> > + return connector_status_connected;
> > + }
> > +
> > + return connector_status_disconnected;
> > +}
> > +
> > +static void sprd_dsi_connector_destroy(struct drm_connector *connector)
> > +{
> > + drm_connector_unregister(connector);
> > + drm_connector_cleanup(connector);
> > +}
> > +
> > +static const struct drm_connector_funcs sprd_dsi_atomic_connector_funcs = {
> > + .fill_modes = drm_helper_probe_single_connector_modes,
> > + .detect = sprd_dsi_connector_detect,
> > + .destroy = sprd_dsi_connector_destroy,
> > + .reset = drm_atomic_helper_connector_reset,
> > + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > +};
> > +
> > +static int sprd_dsi_connector_init(struct drm_device *drm, struct sprd_dsi *dsi)
> > +{
> > + struct drm_encoder *encoder = &dsi->encoder;
> > + struct drm_connector *connector = &dsi->connector;
> > + int ret;
> > +
> > + connector->polled = DRM_CONNECTOR_POLL_HPD;
> > +
> > + ret = drm_connector_init(drm, connector,
> > + &sprd_dsi_atomic_connector_funcs,
> > + DRM_MODE_CONNECTOR_DSI);
> > + if (ret) {
> > + drm_err(drm, "drm_connector_init() failed\n");
> > + return ret;
> > + }
> > +
> > + drm_connector_helper_add(connector,
> > + &sprd_dsi_connector_helper_funcs);
> > +
> > + drm_connector_attach_encoder(connector, encoder);
> > +
> > + return 0;
> > +}
> > +
> > +static int sprd_dsi_context_init(struct sprd_dsi *dsi,
> > + struct device *dev)
> > +{
> > + struct platform_device *pdev = to_platform_device(dev);
> > + struct dsi_context *ctx = &dsi->ctx;
> > + struct resource *res;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + ctx->base = devm_ioremap(dev, res->start, resource_size(res));
> > + if (!ctx->base) {
> > + drm_err(dsi->drm, "failed to map dsi host registers\n");
> > + return -ENXIO;
> > + }
> > +
> > + ctx->pll = devm_kzalloc(dev, sizeof(*ctx->pll), GFP_KERNEL);
> > + if (!ctx->pll)
> > + return -ENOMEM;
> > +
> > + ctx->regmap = devm_regmap_init(dev, &regmap_tst_io, dsi, &byte_config);
> > + if (IS_ERR(ctx->regmap)) {
> > + drm_err(dsi->drm, "dphy regmap init failed\n");
> > + return PTR_ERR(ctx->regmap);
> > + }
> > +
> > + ctx->data_hs2lp = 120;
> > + ctx->data_lp2hs = 500;
> > + ctx->clk_hs2lp = 4;
> > + ctx->clk_lp2hs = 15;
> > + ctx->max_rd_time = 6000;
> > + ctx->int0_mask = 0xffffffff;
> > + ctx->int1_mask = 0xffffffff;
> > + ctx->enabled = true;
> > +
> > + return 0;
> > +}
> > +
> > +static int sprd_dsi_bind(struct device *dev, struct device *master, void *data)
> > +{
> > + struct drm_device *drm = data;
> > + struct sprd_dsi *dsi;
> > + int ret;
> > +
> > + dsi = sprd_dsi_encoder_init(drm, dev);
> > + if (IS_ERR(dsi))
> > + return PTR_ERR(dsi);
> > +
> > + dsi->drm = drm;
> > + dev_set_drvdata(dev, dsi);
> > +
> > + ret = sprd_dsi_connector_init(drm, dsi);
> > + if (ret)
> > + return ret;
> > +
> > + ret = sprd_dsi_context_init(dsi, dev);
> > + if (ret)
> > + return ret;
> > +
> > + ret = sprd_dsi_host_init(dsi, dev);
> > + if (ret)
> > + return ret;
> > +
> > + return 0;
> > +}
> > +
> > +static void sprd_dsi_unbind(struct device *dev,
> > + struct device *master, void *data)
> > +{
> > + struct sprd_dsi *dsi = dev_get_drvdata(dev);
> > +
> > + mipi_dsi_host_unregister(&dsi->host);
> > +}
> > +
> > +static const struct component_ops dsi_component_ops = {
> > + .bind = sprd_dsi_bind,
> > + .unbind = sprd_dsi_unbind,
> > +};
> > +
> > +static const struct of_device_id dsi_match_table[] = {
> > + { .compatible = "sprd,sharkl3-dsi-host" },
> > + { /* sentinel */ },
> > +};
> > +
> > +static int sprd_dsi_probe(struct platform_device *pdev)
> > +{
> > + return component_add(&pdev->dev, &dsi_component_ops);
>
> In order to prevent probe issues, you need to register you mipi_dsi_host
> here, see:
> https://lore.kernel.org/dri-devel/[email protected]/
We register mipi_dsi_hot on our panel driver, like this:

1092 ret = mipi_dsi_attach(slave);
1093 if (ret) {
1094 DRM_ERROR("failed to attach dsi panel to host\n");
1095 drm_panel_remove(&panel->base);
1096 return ret;
1097 }

>
> Maxime

2021-09-28 09:30:36

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

On Sun, Sep 26, 2021 at 10:31:53PM +0800, Kevin Tang wrote:
> Maxime Ripard <[email protected]> 于2021年9月17日周五 下午11:40写道:
> > > +static void sprd_dsi_encoder_mode_set(struct drm_encoder *encoder,
> > > + struct drm_display_mode *mode,
> > > + struct drm_display_mode *adj_mode)
> > > +{
> > > + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> > > +
> > > + drm_dbg(dsi->drm, "%s() set mode: %s\n", __func__, dsi->mode->name);
> > > +}
> >
> > You don't need that function?
> No need for now. need to delete it?

Yes

> > > +static int sprd_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> > > + struct drm_crtc_state *crtc_state,
> > > + struct drm_connector_state *conn_state)
> > > +{
> > > + return 0;
> > > +}
> >
> > Ditto
>
> No need for now. need to delete it?

Yep

> > > +static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
> > > +{
> > > + struct device *dev = dsi->host.dev;
> > > + struct device_node *child, *lcds_node;
> > > + struct drm_panel *panel;
> > > +
> > > + /* search /lcds child node first */
> > > + lcds_node = of_find_node_by_path("/lcds");
> > > + for_each_child_of_node(lcds_node, child) {
> > > + panel = of_drm_find_panel(child);
> > > + if (!IS_ERR(panel)) {
> > > + dsi->panel = panel;
> > > + return 0;
> > > + }
> > > + }
> > > +
> > > + /*
> > > + * If /lcds child node search failed, we search
> > > + * the child of dsi host node.
> > > + */
> > > + for_each_child_of_node(dev->of_node, child) {
> > > + panel = of_drm_find_panel(child);
> > > + if (!IS_ERR(panel)) {
> > > + dsi->panel = panel;
> > > + return 0;
> > > + }
> > > + }
> > > +
> > > + drm_err(dsi->drm, "of_drm_find_panel() failed\n");
> > > + return -ENODEV;
> > > +}
> >
> > Just use devm_drm_of_get_bridge there
>
> We use drm_panel_init and drm_panel_add API to add panel, so here is a
> panel device, not a bridge.

Like Sam said, the panel API is on its way out and is being superseded
by bridge_panels.

> > > +static int sprd_dsi_host_init(struct sprd_dsi *dsi, struct device *dev)
> > > +{
> > > + int ret;
> > > +
> > > + dsi->host.dev = dev;
> > > + dsi->host.ops = &sprd_dsi_host_ops;
> > > +
> > > + ret = mipi_dsi_host_register(&dsi->host);
> > > + if (ret)
> > > + drm_err(dsi->drm, "failed to register dsi host\n");
> > > +
> > > + return ret;
> > > +}
> > >
> > > [...]
> > >
> > > +static int sprd_dsi_connector_init(struct drm_device *drm, struct sprd_dsi *dsi)
> > > +{
> > > + struct drm_encoder *encoder = &dsi->encoder;
> > > + struct drm_connector *connector = &dsi->connector;
> > > + int ret;
> > > +
> > > + connector->polled = DRM_CONNECTOR_POLL_HPD;
> > > +
> > > + ret = drm_connector_init(drm, connector,
> > > + &sprd_dsi_atomic_connector_funcs,
> > > + DRM_MODE_CONNECTOR_DSI);
> > > + if (ret) {
> > > + drm_err(drm, "drm_connector_init() failed\n");
> > > + return ret;
> > > + }
> > > +
> > > + drm_connector_helper_add(connector,
> > > + &sprd_dsi_connector_helper_funcs);
> > > +
> > > + drm_connector_attach_encoder(connector, encoder);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int sprd_dsi_context_init(struct sprd_dsi *dsi,
> > > + struct device *dev)
> > > +{
> > > + struct platform_device *pdev = to_platform_device(dev);
> > > + struct dsi_context *ctx = &dsi->ctx;
> > > + struct resource *res;
> > > +
> > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > + ctx->base = devm_ioremap(dev, res->start, resource_size(res));
> > > + if (!ctx->base) {
> > > + drm_err(dsi->drm, "failed to map dsi host registers\n");
> > > + return -ENXIO;
> > > + }
> > > +
> > > + ctx->pll = devm_kzalloc(dev, sizeof(*ctx->pll), GFP_KERNEL);
> > > + if (!ctx->pll)
> > > + return -ENOMEM;
> > > +
> > > + ctx->regmap = devm_regmap_init(dev, &regmap_tst_io, dsi, &byte_config);
> > > + if (IS_ERR(ctx->regmap)) {
> > > + drm_err(dsi->drm, "dphy regmap init failed\n");
> > > + return PTR_ERR(ctx->regmap);
> > > + }
> > > +
> > > + ctx->data_hs2lp = 120;
> > > + ctx->data_lp2hs = 500;
> > > + ctx->clk_hs2lp = 4;
> > > + ctx->clk_lp2hs = 15;
> > > + ctx->max_rd_time = 6000;
> > > + ctx->int0_mask = 0xffffffff;
> > > + ctx->int1_mask = 0xffffffff;
> > > + ctx->enabled = true;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int sprd_dsi_bind(struct device *dev, struct device *master, void *data)
> > > +{
> > > + struct drm_device *drm = data;
> > > + struct sprd_dsi *dsi;
> > > + int ret;
> > > +
> > > + dsi = sprd_dsi_encoder_init(drm, dev);
> > > + if (IS_ERR(dsi))
> > > + return PTR_ERR(dsi);
> > > +
> > > + dsi->drm = drm;
> > > + dev_set_drvdata(dev, dsi);
> > > +
> > > + ret = sprd_dsi_connector_init(drm, dsi);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = sprd_dsi_context_init(dsi, dev);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = sprd_dsi_host_init(dsi, dev);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void sprd_dsi_unbind(struct device *dev,
> > > + struct device *master, void *data)
> > > +{
> > > + struct sprd_dsi *dsi = dev_get_drvdata(dev);
> > > +
> > > + mipi_dsi_host_unregister(&dsi->host);
> > > +}
> > > +
> > > +static const struct component_ops dsi_component_ops = {
> > > + .bind = sprd_dsi_bind,
> > > + .unbind = sprd_dsi_unbind,
> > > +};
> > > +
> > > +static const struct of_device_id dsi_match_table[] = {
> > > + { .compatible = "sprd,sharkl3-dsi-host" },
> > > + { /* sentinel */ },
> > > +};
> > > +
> > > +static int sprd_dsi_probe(struct platform_device *pdev)
> > > +{
> > > + return component_add(&pdev->dev, &dsi_component_ops);
> >
> > In order to prevent probe issues, you need to register you mipi_dsi_host
> > here, see:
> > https://lore.kernel.org/dri-devel/[email protected]/
>
> We register mipi_dsi_hot on our panel driver, like this:
>
> 1092 ret = mipi_dsi_attach(slave);
> 1093 if (ret) {
> 1094 DRM_ERROR("failed to attach dsi panel to host\n");
> 1095 drm_panel_remove(&panel->base);
> 1096 return ret;
> 1097 }

It's not about when you attach, but when you call
mipi_dsi_host_register. You're doing it in sprd_dsi_host_init that you
call in bind(), which is against the best practices and will create
probing issues in the future.

Maxime

2021-10-06 17:56:23

by Kevin Tang

[permalink] [raw]
Subject: Re: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

Maxime Ripard <[email protected]> 于2021年9月28日周二 下午5:28写道:
>
> On Sun, Sep 26, 2021 at 10:31:53PM +0800, Kevin Tang wrote:
> > Maxime Ripard <[email protected]> 于2021年9月17日周五 下午11:40写道:
> > > > +static void sprd_dsi_encoder_mode_set(struct drm_encoder *encoder,
> > > > + struct drm_display_mode *mode,
> > > > + struct drm_display_mode *adj_mode)
> > > > +{
> > > > + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> > > > +
> > > > + drm_dbg(dsi->drm, "%s() set mode: %s\n", __func__, dsi->mode->name);
> > > > +}
> > >
> > > You don't need that function?
> > No need for now. need to delete it?
>
> Yes
>
> > > > +static int sprd_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> > > > + struct drm_crtc_state *crtc_state,
> > > > + struct drm_connector_state *conn_state)
> > > > +{
> > > > + return 0;
> > > > +}
> > >
> > > Ditto
> >
> > No need for now. need to delete it?
>
> Yep
>
> > > > +static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
> > > > +{
> > > > + struct device *dev = dsi->host.dev;
> > > > + struct device_node *child, *lcds_node;
> > > > + struct drm_panel *panel;
> > > > +
> > > > + /* search /lcds child node first */
> > > > + lcds_node = of_find_node_by_path("/lcds");
> > > > + for_each_child_of_node(lcds_node, child) {
> > > > + panel = of_drm_find_panel(child);
> > > > + if (!IS_ERR(panel)) {
> > > > + dsi->panel = panel;
> > > > + return 0;
> > > > + }
> > > > + }
> > > > +
> > > > + /*
> > > > + * If /lcds child node search failed, we search
> > > > + * the child of dsi host node.
> > > > + */
> > > > + for_each_child_of_node(dev->of_node, child) {
> > > > + panel = of_drm_find_panel(child);
> > > > + if (!IS_ERR(panel)) {
> > > > + dsi->panel = panel;
> > > > + return 0;
> > > > + }
> > > > + }
> > > > +
> > > > + drm_err(dsi->drm, "of_drm_find_panel() failed\n");
> > > > + return -ENODEV;
> > > > +}
> > >
> > > Just use devm_drm_of_get_bridge there
> >
> > We use drm_panel_init and drm_panel_add API to add panel, so here is a
> > panel device, not a bridge.
>
> Like Sam said, the panel API is on its way out and is being superseded
> by bridge_panels.
Ok, i will try it.
>
> > > > +static int sprd_dsi_host_init(struct sprd_dsi *dsi, struct device *dev)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + dsi->host.dev = dev;
> > > > + dsi->host.ops = &sprd_dsi_host_ops;
> > > > +
> > > > + ret = mipi_dsi_host_register(&dsi->host);
> > > > + if (ret)
> > > > + drm_err(dsi->drm, "failed to register dsi host\n");
> > > > +
> > > > + return ret;
> > > > +}
> > > >
> > > > [...]
> > > >
> > > > +static int sprd_dsi_connector_init(struct drm_device *drm, struct sprd_dsi *dsi)
> > > > +{
> > > > + struct drm_encoder *encoder = &dsi->encoder;
> > > > + struct drm_connector *connector = &dsi->connector;
> > > > + int ret;
> > > > +
> > > > + connector->polled = DRM_CONNECTOR_POLL_HPD;
> > > > +
> > > > + ret = drm_connector_init(drm, connector,
> > > > + &sprd_dsi_atomic_connector_funcs,
> > > > + DRM_MODE_CONNECTOR_DSI);
> > > > + if (ret) {
> > > > + drm_err(drm, "drm_connector_init() failed\n");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + drm_connector_helper_add(connector,
> > > > + &sprd_dsi_connector_helper_funcs);
> > > > +
> > > > + drm_connector_attach_encoder(connector, encoder);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int sprd_dsi_context_init(struct sprd_dsi *dsi,
> > > > + struct device *dev)
> > > > +{
> > > > + struct platform_device *pdev = to_platform_device(dev);
> > > > + struct dsi_context *ctx = &dsi->ctx;
> > > > + struct resource *res;
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > + ctx->base = devm_ioremap(dev, res->start, resource_size(res));
> > > > + if (!ctx->base) {
> > > > + drm_err(dsi->drm, "failed to map dsi host registers\n");
> > > > + return -ENXIO;
> > > > + }
> > > > +
> > > > + ctx->pll = devm_kzalloc(dev, sizeof(*ctx->pll), GFP_KERNEL);
> > > > + if (!ctx->pll)
> > > > + return -ENOMEM;
> > > > +
> > > > + ctx->regmap = devm_regmap_init(dev, &regmap_tst_io, dsi, &byte_config);
> > > > + if (IS_ERR(ctx->regmap)) {
> > > > + drm_err(dsi->drm, "dphy regmap init failed\n");
> > > > + return PTR_ERR(ctx->regmap);
> > > > + }
> > > > +
> > > > + ctx->data_hs2lp = 120;
> > > > + ctx->data_lp2hs = 500;
> > > > + ctx->clk_hs2lp = 4;
> > > > + ctx->clk_lp2hs = 15;
> > > > + ctx->max_rd_time = 6000;
> > > > + ctx->int0_mask = 0xffffffff;
> > > > + ctx->int1_mask = 0xffffffff;
> > > > + ctx->enabled = true;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int sprd_dsi_bind(struct device *dev, struct device *master, void *data)
> > > > +{
> > > > + struct drm_device *drm = data;
> > > > + struct sprd_dsi *dsi;
> > > > + int ret;
> > > > +
> > > > + dsi = sprd_dsi_encoder_init(drm, dev);
> > > > + if (IS_ERR(dsi))
> > > > + return PTR_ERR(dsi);
> > > > +
> > > > + dsi->drm = drm;
> > > > + dev_set_drvdata(dev, dsi);
> > > > +
> > > > + ret = sprd_dsi_connector_init(drm, dsi);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = sprd_dsi_context_init(dsi, dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = sprd_dsi_host_init(dsi, dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void sprd_dsi_unbind(struct device *dev,
> > > > + struct device *master, void *data)
> > > > +{
> > > > + struct sprd_dsi *dsi = dev_get_drvdata(dev);
> > > > +
> > > > + mipi_dsi_host_unregister(&dsi->host);
> > > > +}
> > > > +
> > > > +static const struct component_ops dsi_component_ops = {
> > > > + .bind = sprd_dsi_bind,
> > > > + .unbind = sprd_dsi_unbind,
> > > > +};
> > > > +
> > > > +static const struct of_device_id dsi_match_table[] = {
> > > > + { .compatible = "sprd,sharkl3-dsi-host" },
> > > > + { /* sentinel */ },
> > > > +};
> > > > +
> > > > +static int sprd_dsi_probe(struct platform_device *pdev)
> > > > +{
> > > > + return component_add(&pdev->dev, &dsi_component_ops);
> > >
> > > In order to prevent probe issues, you need to register you mipi_dsi_host
> > > here, see:
> > > https://lore.kernel.org/dri-devel/[email protected]/
> >
> > We register mipi_dsi_hot on our panel driver, like this:
> >
> > 1092 ret = mipi_dsi_attach(slave);
> > 1093 if (ret) {
> > 1094 DRM_ERROR("failed to attach dsi panel to host\n");
> > 1095 drm_panel_remove(&panel->base);
> > 1096 return ret;
> > 1097 }
>
> It's not about when you attach, but when you call
> mipi_dsi_host_register. You're doing it in sprd_dsi_host_init that you
> call in bind(), which is against the best practices and will create
> probing issues in the future.
If we call mipi_dsi_host_register on probe phase, it looks like can't
call drmm_encoder_alloc to create dsi device on bind.
It may be necessary to go back to the devm_kzalloc method used before

static int sprd_dsi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct sprd_dsi *dsi;

dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
if (!dsi)
return -ENOMEM;

dsi->host.dev = dev;
dsi->host.ops = &sprd_dsi_host_ops;
ret = mipi_dsi_host_register(&dsi->host);
if (ret)
dev_err(dev, "failed to register dsi host\n");

......
return 0;
}

>
> Maxime

2021-10-06 18:26:24

by Kevin Tang

[permalink] [raw]
Subject: Re: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

Sam,
Thanks for your response.

Sam Ravnborg <[email protected]> 于2021年9月27日周一 上午12:33写道:
>
> Hi Kevin,
>
> > > > + reg->_0b.bits.out_sel = pll->out_sel;
> > > > + reg->_0b.bits.kint_l = pll->kint & 0xf;
> > > > + reg->_0e.bits.pll_pu_byp = 0;
> > > > + reg->_0e.bits.pll_pu = 0;
> > > > + reg->_0e.bits.stopstate_sel = 1;
> > > > + reg->_0f.bits.det_delay = pll->det_delay;
> > > > +
> > > > + val = (u8 *)&reg;
> > > > +
> > > > + for (i = 0; i < sizeof(reg_addr); ++i) {
> > > > + regmap_write(regmap, reg_addr[i], val[i]);
> > > > + DRM_DEBUG("%02x: %02x\n", reg_addr[i], val[i]);
> > > > + }
> > > > +}
> > >
> > > It would be great to also convert this part to a pattern without
> > > structures.
> > I will try it, but our pll registers, all not have official name from
> > aisc design owner.
> > If need to convert it, our pll regiters macro define, it can only be
> > named as reg_01, reg_02...
> IT is better to use the stupid names provided by you asic design owner,
> than just numbers. Add a comment explaining this is due to the asic
> design owner the names are stupid and not your fault.
The chip manual released to us by the asic designer is like this for
many years ago.
As for the specific reason, unable to find out now, i will try use
"stupid names" rather than numbers.
>
> > > > +
> > > > + if (dsi->panel) {
> > > > + drm_panel_prepare(dsi->panel);
> > > > + drm_panel_enable(dsi->panel);
> > > > + }
> > >
> > > Please use the new devm_drm_of_get_bridge helper here, and use the
> > > bridge API instead.
> > We use drm_panel_init and drm_panel_add API to add panel, so here is a
> > panel device, not a bridge.
>
> The new way to do this is to always wrap the panel in a bridge. We will
> start to slowly migrate away from direct use of the panel API, and let
> display drivers always wrap the panles in a bridge.
> So please do as Maxime suggests.
I only found a demo about the use of devm_drm_of_get_bridge in the vc4
dsi driver, i
will try to follow it.
>
> Sam

2021-10-20 10:13:55

by Kevin Tang

[permalink] [raw]
Subject: Re: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

Maxime Ripard <[email protected]> 于2021年9月28日周二 下午5:28写道:
>
> On Sun, Sep 26, 2021 at 10:31:53PM +0800, Kevin Tang wrote:
> > Maxime Ripard <[email protected]> 于2021年9月17日周五 下午11:40写道:
> > > > +static void sprd_dsi_encoder_mode_set(struct drm_encoder *encoder,
> > > > + struct drm_display_mode *mode,
> > > > + struct drm_display_mode *adj_mode)
> > > > +{
> > > > + struct sprd_dsi *dsi = encoder_to_dsi(encoder);
> > > > +
> > > > + drm_dbg(dsi->drm, "%s() set mode: %s\n", __func__, dsi->mode->name);
> > > > +}
> > >
> > > You don't need that function?
> > No need for now. need to delete it?
>
> Yes
>
> > > > +static int sprd_dsi_encoder_atomic_check(struct drm_encoder *encoder,
> > > > + struct drm_crtc_state *crtc_state,
> > > > + struct drm_connector_state *conn_state)
> > > > +{
> > > > + return 0;
> > > > +}
> > >
> > > Ditto
> >
> > No need for now. need to delete it?
>
> Yep
>
> > > > +static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
> > > > +{
> > > > + struct device *dev = dsi->host.dev;
> > > > + struct device_node *child, *lcds_node;
> > > > + struct drm_panel *panel;
> > > > +
> > > > + /* search /lcds child node first */
> > > > + lcds_node = of_find_node_by_path("/lcds");
> > > > + for_each_child_of_node(lcds_node, child) {
> > > > + panel = of_drm_find_panel(child);
> > > > + if (!IS_ERR(panel)) {
> > > > + dsi->panel = panel;
> > > > + return 0;
> > > > + }
> > > > + }
> > > > +
> > > > + /*
> > > > + * If /lcds child node search failed, we search
> > > > + * the child of dsi host node.
> > > > + */
> > > > + for_each_child_of_node(dev->of_node, child) {
> > > > + panel = of_drm_find_panel(child);
> > > > + if (!IS_ERR(panel)) {
> > > > + dsi->panel = panel;
> > > > + return 0;
> > > > + }
> > > > + }
> > > > +
> > > > + drm_err(dsi->drm, "of_drm_find_panel() failed\n");
> > > > + return -ENODEV;
> > > > +}
> > >
> > > Just use devm_drm_of_get_bridge there
> >
> > We use drm_panel_init and drm_panel_add API to add panel, so here is a
> > panel device, not a bridge.
>
> Like Sam said, the panel API is on its way out and is being superseded
> by bridge_panels.
hi maxime,
If get a panel by devm_drm_of_get_bridge, how to use bridge api to access panel?
it seems that pre_enable/enable still needs to be implemented, so we
need to add drm_bridge_func,
then move the panel-related operations in drm_encoder_helper_funcs to
drm_bridge_funcs callback?
>
> > > > +static int sprd_dsi_host_init(struct sprd_dsi *dsi, struct device *dev)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + dsi->host.dev = dev;
> > > > + dsi->host.ops = &sprd_dsi_host_ops;
> > > > +
> > > > + ret = mipi_dsi_host_register(&dsi->host);
> > > > + if (ret)
> > > > + drm_err(dsi->drm, "failed to register dsi host\n");
> > > > +
> > > > + return ret;
> > > > +}
> > > >
> > > > [...]
> > > >
> > > > +static int sprd_dsi_connector_init(struct drm_device *drm, struct sprd_dsi *dsi)
> > > > +{
> > > > + struct drm_encoder *encoder = &dsi->encoder;
> > > > + struct drm_connector *connector = &dsi->connector;
> > > > + int ret;
> > > > +
> > > > + connector->polled = DRM_CONNECTOR_POLL_HPD;
> > > > +
> > > > + ret = drm_connector_init(drm, connector,
> > > > + &sprd_dsi_atomic_connector_funcs,
> > > > + DRM_MODE_CONNECTOR_DSI);
> > > > + if (ret) {
> > > > + drm_err(drm, "drm_connector_init() failed\n");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + drm_connector_helper_add(connector,
> > > > + &sprd_dsi_connector_helper_funcs);
> > > > +
> > > > + drm_connector_attach_encoder(connector, encoder);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int sprd_dsi_context_init(struct sprd_dsi *dsi,
> > > > + struct device *dev)
> > > > +{
> > > > + struct platform_device *pdev = to_platform_device(dev);
> > > > + struct dsi_context *ctx = &dsi->ctx;
> > > > + struct resource *res;
> > > > +
> > > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > > + ctx->base = devm_ioremap(dev, res->start, resource_size(res));
> > > > + if (!ctx->base) {
> > > > + drm_err(dsi->drm, "failed to map dsi host registers\n");
> > > > + return -ENXIO;
> > > > + }
> > > > +
> > > > + ctx->pll = devm_kzalloc(dev, sizeof(*ctx->pll), GFP_KERNEL);
> > > > + if (!ctx->pll)
> > > > + return -ENOMEM;
> > > > +
> > > > + ctx->regmap = devm_regmap_init(dev, &regmap_tst_io, dsi, &byte_config);
> > > > + if (IS_ERR(ctx->regmap)) {
> > > > + drm_err(dsi->drm, "dphy regmap init failed\n");
> > > > + return PTR_ERR(ctx->regmap);
> > > > + }
> > > > +
> > > > + ctx->data_hs2lp = 120;
> > > > + ctx->data_lp2hs = 500;
> > > > + ctx->clk_hs2lp = 4;
> > > > + ctx->clk_lp2hs = 15;
> > > > + ctx->max_rd_time = 6000;
> > > > + ctx->int0_mask = 0xffffffff;
> > > > + ctx->int1_mask = 0xffffffff;
> > > > + ctx->enabled = true;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int sprd_dsi_bind(struct device *dev, struct device *master, void *data)
> > > > +{
> > > > + struct drm_device *drm = data;
> > > > + struct sprd_dsi *dsi;
> > > > + int ret;
> > > > +
> > > > + dsi = sprd_dsi_encoder_init(drm, dev);
> > > > + if (IS_ERR(dsi))
> > > > + return PTR_ERR(dsi);
> > > > +
> > > > + dsi->drm = drm;
> > > > + dev_set_drvdata(dev, dsi);
> > > > +
> > > > + ret = sprd_dsi_connector_init(drm, dsi);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = sprd_dsi_context_init(dsi, dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + ret = sprd_dsi_host_init(dsi, dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void sprd_dsi_unbind(struct device *dev,
> > > > + struct device *master, void *data)
> > > > +{
> > > > + struct sprd_dsi *dsi = dev_get_drvdata(dev);
> > > > +
> > > > + mipi_dsi_host_unregister(&dsi->host);
> > > > +}
> > > > +
> > > > +static const struct component_ops dsi_component_ops = {
> > > > + .bind = sprd_dsi_bind,
> > > > + .unbind = sprd_dsi_unbind,
> > > > +};
> > > > +
> > > > +static const struct of_device_id dsi_match_table[] = {
> > > > + { .compatible = "sprd,sharkl3-dsi-host" },
> > > > + { /* sentinel */ },
> > > > +};
> > > > +
> > > > +static int sprd_dsi_probe(struct platform_device *pdev)
> > > > +{
> > > > + return component_add(&pdev->dev, &dsi_component_ops);
> > >
> > > In order to prevent probe issues, you need to register you mipi_dsi_host
> > > here, see:
> > > https://lore.kernel.org/dri-devel/[email protected]/
> >
> > We register mipi_dsi_hot on our panel driver, like this:
> >
> > 1092 ret = mipi_dsi_attach(slave);
> > 1093 if (ret) {
> > 1094 DRM_ERROR("failed to attach dsi panel to host\n");
> > 1095 drm_panel_remove(&panel->base);
> > 1096 return ret;
> > 1097 }
>
> It's not about when you attach, but when you call
> mipi_dsi_host_register. You're doing it in sprd_dsi_host_init that you
> call in bind(), which is against the best practices and will create
> probing issues in the future.
>
> Maxime

2021-10-21 08:15:32

by Maxime Ripard

[permalink] [raw]
Subject: Re: [PATCH v6 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver

Hi,

On Wed, Oct 20, 2021 at 06:09:32PM +0800, Kevin Tang wrote:
> Maxime Ripard <[email protected]> 于2021年9月28日周二 下午5:28写道:
> > > > > +static int sprd_dsi_find_panel(struct sprd_dsi *dsi)
> > > > > +{
> > > > > + struct device *dev = dsi->host.dev;
> > > > > + struct device_node *child, *lcds_node;
> > > > > + struct drm_panel *panel;
> > > > > +
> > > > > + /* search /lcds child node first */
> > > > > + lcds_node = of_find_node_by_path("/lcds");
> > > > > + for_each_child_of_node(lcds_node, child) {
> > > > > + panel = of_drm_find_panel(child);
> > > > > + if (!IS_ERR(panel)) {
> > > > > + dsi->panel = panel;
> > > > > + return 0;
> > > > > + }
> > > > > + }
> > > > > +
> > > > > + /*
> > > > > + * If /lcds child node search failed, we search
> > > > > + * the child of dsi host node.
> > > > > + */
> > > > > + for_each_child_of_node(dev->of_node, child) {
> > > > > + panel = of_drm_find_panel(child);
> > > > > + if (!IS_ERR(panel)) {
> > > > > + dsi->panel = panel;
> > > > > + return 0;
> > > > > + }
> > > > > + }
> > > > > +
> > > > > + drm_err(dsi->drm, "of_drm_find_panel() failed\n");
> > > > > + return -ENODEV;
> > > > > +}
> > > >
> > > > Just use devm_drm_of_get_bridge there
> > >
> > > We use drm_panel_init and drm_panel_add API to add panel, so here is a
> > > panel device, not a bridge.
> >
> > Like Sam said, the panel API is on its way out and is being superseded
> > by bridge_panels.
>
> If get a panel by devm_drm_of_get_bridge, how to use bridge api to
> access panel?

You don't.

You'd get a panel-bridge driver (drivers/gpu/drm/bridge/panel.c), that
behaves like a bridge and will call the panel functions itself.

And since it's a bridge, everything (enable, pre_enable, etc.) is called
by the core framework (in drm_atomic_helper_commit_modeset_enables for
enable and pre_enable).

> it seems that pre_enable/enable still needs to be implemented, so we
> need to add drm_bridge_func, then move the panel-related operations in
> drm_encoder_helper_funcs to drm_bridge_funcs callback?

You're confusing two things. Our comment wasn't that this DSI needed to
be converted to a bridge itself (which is what you're talking about),
but that it needs to use the bridge API instead of the panel API to deal
with whatever is connected at the other end of the DSI link.

Maxime


Attachments:
(No filename) (2.55 kB)
signature.asc (235.00 B)
Download all attachments