Note:
- The machine driver patch is made by the collaboration of
Cheng-Yi Chiang <[email protected]>
Rohit kumar <[email protected]>
Ajit Pandey <[email protected]>
But Ajit has left codeaurora.
- This patch series needs HDMI DAI name defined in sc7180-lpass.h.
https://patchwork.kernel.org/patch/11745565/
Changes from v1 to v2:
- Ducumentation: Addressed all suggestions from Doug.
- Machine driver:
- Fix comment style for license.
- Sort includes.
- Remove sc7180_snd_hw_params.
- Remove sc7180_dai_init and use aux device instead for headset jack registration.
- Statically define format for Primary MI2S.
- Atomic is not a concern because there is mutex in card to make sure
startup and shutdown happen sequentially.
- Fix missing return -EINVAL in startup.
- Use static sound card.
- Use devm_kzalloc to avoid kfree.
Changes from v2 to v3:
- Ducumentation: Addressed suggestions from Srini.
- Machine driver:
- Reuse qcom_snd_parse_of to parse properties.
- Remove playback-only and capture-only.
- Misc fixes to address comments.
Changes from v3 to v4:
- Ducumentation: Addressed suggestions from Rob.
- Remove definition of dai.
- Use 'sound-dai: true' for sound-dai schema.
- Add reg property to pass 'make dt_binding_check' check although reg is not used in the driver.
- Machine driver:
- Add Reviewed-by: Tzung-Bi Shih <[email protected]>
Changes from v4 to v5:
- Documentation: Addressed suggestions from Rob.
- Add definition for "#address-cells" and "#size-cells".
- Add additionalProperties: false
- Add required properties.
Changes from v5 to v6:
- Documentation: Addressed suggestions from Rob.
- Drop contains in compatible strings.
- Only allow dai-link@[0-9]
- Remove reg ref since it has a type definition already.
Changes from v6 to v7
- Documentation:
- Add headset-jack and hdmi-jack to specify the codec
responsible for jack detection.
- HDMI codec driver:
- Use component set_jack ops instead of exporting hdmi_codec_set_jack_detect.
- Machine driver:
- Removed aux device following Stephan's suggestion.
- Use headset-jack and hdmi-jack to specify the codec
responsible for jack detection.
- Add support for HDMI(actually DP) playback.
Changes from v7 to v8
- Documentation:
- Remove headset-jack and hdmi-jack.
- Machine driver:
- Let machine driver decide whether there is a jack on the DAI.
Changes from v8 to v9
- hdmi-codec driver:
- Fixed the naming.
- Machine driver:
- Fixed unused fields.
- Moved snd_soc_card_set_drvdata
- Keep the naming of HDMI as dai name until v5 of lpass-hdmi patches.
Ajit Pandey (1):
ASoC: qcom: sc7180: Add machine driver for sound card registration
Cheng-Yi Chiang (2):
ASoC: hdmi-codec: Use set_jack ops to set jack
ASoC: qcom: dt-bindings: Add sc7180 machine bindings
.../bindings/sound/qcom,sc7180.yaml | 130 +++++++++
include/sound/hdmi-codec.h | 3 -
sound/soc/codecs/hdmi-codec.c | 12 +-
sound/soc/mediatek/mt8173/mt8173-rt5650.c | 5 +-
.../mediatek/mt8183/mt8183-da7219-max98357.c | 5 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 5 +-
sound/soc/qcom/Kconfig | 12 +
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++
sound/soc/rockchip/rockchip_max98090.c | 3 +-
10 files changed, 422 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
create mode 100644 sound/soc/qcom/sc7180.c
--
2.28.0.618.gf4bc123cb7-goog
From: Ajit Pandey <[email protected]>
Add new driver to register sound card on sc7180 trogdor board and
do the required configuration for lpass cpu dai and external codecs
connected over MI2S interfaces.
Signed-off-by: Ajit Pandey <[email protected]>
Signed-off-by: Cheng-Yi Chiang <[email protected]>
---
sound/soc/qcom/Kconfig | 12 ++
sound/soc/qcom/Makefile | 2 +
sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 281 insertions(+)
create mode 100644 sound/soc/qcom/sc7180.c
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index a607ace8b089..0459185ee243 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -116,4 +116,16 @@ config SND_SOC_SDM845
SDM845 SoC-based systems.
Say Y if you want to use audio device on this SoCs.
+config SND_SOC_SC7180
+ tristate "SoC Machine driver for SC7180 boards"
+ depends on I2C
+ select SND_SOC_QCOM_COMMON
+ select SND_SOC_LPASS_SC7180
+ select SND_SOC_MAX98357A
+ select SND_SOC_RT5682_I2C
+ help
+ To add support for audio on Qualcomm Technologies Inc.
+ SC7180 SoC-based systems.
+ Say Y if you want to use audio device on this SoCs.
+
endif #SND_SOC_QCOM
diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
index 7972c9479ab0..0cdcbf367ef1 100644
--- a/sound/soc/qcom/Makefile
+++ b/sound/soc/qcom/Makefile
@@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o
snd-soc-apq8016-sbc-objs := apq8016_sbc.o
snd-soc-apq8096-objs := apq8096.o
snd-soc-sdm845-objs := sdm845.o
+snd-soc-sc7180-objs := sc7180.o
snd-soc-qcom-common-objs := common.o
obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
+obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
#DSP lib
diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
new file mode 100644
index 000000000000..40bc4fc98842
--- /dev/null
+++ b/sound/soc/qcom/sc7180.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (c) 2020, The Linux Foundation. All rights reserved.
+//
+// sc7180.c -- ALSA SoC Machine driver for SC7180
+
+#include <dt-bindings/sound/sc7180-lpass.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <sound/core.h>
+#include <sound/jack.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <uapi/linux/input-event-codes.h>
+
+#include "../codecs/rt5682.h"
+#include "common.h"
+#include "lpass.h"
+
+#define DEFAULT_SAMPLE_RATE_48K 48000
+#define DEFAULT_MCLK_RATE 19200000
+#define RT5682_PLL1_FREQ (48000 * 512)
+
+struct sc7180_snd_data {
+ u32 pri_mi2s_clk_count;
+ struct snd_soc_jack hs_jack;
+ struct snd_soc_jack hdmi_jack;
+};
+
+static void sc7180_jack_free(struct snd_jack *jack)
+{
+ struct snd_soc_component *component = jack->private_data;
+
+ snd_soc_component_set_jack(component, NULL, NULL);
+}
+
+static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+ struct snd_soc_component *component = codec_dai->component;
+ struct snd_jack *jack;
+ int rval;
+
+ rval = snd_soc_card_jack_new(
+ card, "Headset Jack",
+ SND_JACK_HEADSET |
+ SND_JACK_HEADPHONE |
+ SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3,
+ &pdata->hs_jack, NULL, 0);
+
+ if (rval < 0) {
+ dev_err(card->dev, "Unable to add Headset Jack\n");
+ return rval;
+ }
+
+ jack = pdata->hs_jack.jack;
+
+ snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+ snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+ snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+ snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+ jack->private_data = component;
+ jack->private_free = sc7180_jack_free;
+
+ return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
+}
+
+static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_card *card = rtd->card;
+ struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+ struct snd_soc_component *component = codec_dai->component;
+ struct snd_jack *jack;
+ int rval;
+
+ rval = snd_soc_card_jack_new(
+ card, "HDMI Jack",
+ SND_JACK_LINEOUT,
+ &pdata->hdmi_jack, NULL, 0);
+
+ if (rval < 0) {
+ dev_err(card->dev, "Unable to add HDMI Jack\n");
+ return rval;
+ }
+
+ jack = pdata->hdmi_jack.jack;
+ jack->private_data = component;
+ jack->private_free = sc7180_jack_free;
+
+ return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
+}
+
+static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
+{
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+ switch (cpu_dai->id) {
+ case MI2S_PRIMARY:
+ return sc7180_headset_init(rtd);
+ case MI2S_SECONDARY:
+ return 0;
+ case HDMI:
+ return sc7180_hdmi_init(rtd);
+ default:
+ dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+ cpu_dai->id);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int sc7180_snd_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+ struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
+ int ret;
+
+ switch (cpu_dai->id) {
+ case MI2S_PRIMARY:
+ if (++data->pri_mi2s_clk_count == 1) {
+ snd_soc_dai_set_sysclk(cpu_dai,
+ LPASS_MCLK0,
+ DEFAULT_MCLK_RATE,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ }
+
+ snd_soc_dai_set_fmt(codec_dai,
+ SND_SOC_DAIFMT_CBS_CFS |
+ SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_I2S);
+
+ /* Configure PLL1 for codec */
+ ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
+ DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
+ if (ret) {
+ dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+ return ret;
+ }
+
+ /* Configure sysclk for codec */
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
+ RT5682_PLL1_FREQ,
+ SND_SOC_CLOCK_IN);
+ if (ret)
+ dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
+ ret);
+
+ break;
+ case MI2S_SECONDARY:
+ break;
+ case HDMI:
+ break;
+ default:
+ dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+ cpu_dai->id);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_card *card = rtd->card;
+ struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
+ struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
+
+ switch (cpu_dai->id) {
+ case MI2S_PRIMARY:
+ if (--data->pri_mi2s_clk_count == 0) {
+ snd_soc_dai_set_sysclk(cpu_dai,
+ LPASS_MCLK0,
+ 0,
+ SNDRV_PCM_STREAM_PLAYBACK);
+ }
+ break;
+ case MI2S_SECONDARY:
+ break;
+ case HDMI:
+ break;
+ default:
+ dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
+ cpu_dai->id);
+ break;
+ }
+}
+
+static const struct snd_soc_ops sc7180_ops = {
+ .startup = sc7180_snd_startup,
+ .shutdown = sc7180_snd_shutdown,
+};
+
+static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
+ SND_SOC_DAPM_MIC("Headset Mic", NULL),
+};
+
+static struct snd_soc_card sc7180_card = {
+ .owner = THIS_MODULE,
+ .dapm_widgets = sc7180_snd_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
+};
+
+static void sc7180_add_ops(struct snd_soc_card *card)
+{
+ struct snd_soc_dai_link *link;
+ int i;
+
+ for_each_card_prelinks(card, i, link) {
+ link->ops = &sc7180_ops;
+ link->init = sc7180_init;
+ }
+}
+
+static int sc7180_snd_platform_probe(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = &sc7180_card;
+ struct sc7180_snd_data *data;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ /* Allocate the private data */
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ card->dev = dev;
+ snd_soc_card_set_drvdata(card, data);
+
+ ret = qcom_snd_parse_of(card);
+ if (ret) {
+ dev_err(dev, "Error parsing OF data\n");
+ return ret;
+ }
+
+ sc7180_add_ops(card);
+
+ return devm_snd_soc_register_card(dev, card);
+}
+
+static const struct of_device_id sc7180_snd_device_id[] = {
+ { .compatible = "qcom,sc7180-sndcard" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
+
+static struct platform_driver sc7180_snd_driver = {
+ .probe = sc7180_snd_platform_probe,
+ .driver = {
+ .name = "msm-snd-sc7180",
+ .of_match_table = sc7180_snd_device_id,
+ },
+};
+module_platform_driver(sc7180_snd_driver);
+
+MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
+MODULE_LICENSE("GPL v2");
--
2.28.0.618.gf4bc123cb7-goog
Use set_jack ops to set jack so machine drivers do not need to include
hdmi-codec.h explicitly.
Signed-off-by: Cheng-Yi Chiang <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
---
include/sound/hdmi-codec.h | 3 ---
sound/soc/codecs/hdmi-codec.c | 12 ++++--------
sound/soc/mediatek/mt8173/mt8173-rt5650.c | 5 ++---
sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c | 5 ++---
.../mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c | 5 ++---
sound/soc/rockchip/rockchip_max98090.c | 3 +--
6 files changed, 11 insertions(+), 22 deletions(-)
diff --git a/include/sound/hdmi-codec.h b/include/sound/hdmi-codec.h
index 7754631a3102..b55970859a13 100644
--- a/include/sound/hdmi-codec.h
+++ b/include/sound/hdmi-codec.h
@@ -117,9 +117,6 @@ struct hdmi_codec_pdata {
struct snd_soc_component;
struct snd_soc_jack;
-int hdmi_codec_set_jack_detect(struct snd_soc_component *component,
- struct snd_soc_jack *jack);
-
#define HDMI_CODEC_DRV_NAME "hdmi-audio-codec"
#endif /* __HDMI_CODEC_H__ */
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 8c6f540533ba..403d4c6a49a8 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -698,13 +698,9 @@ static void plugged_cb(struct device *dev, bool plugged)
hdmi_codec_jack_report(hcp, 0);
}
-/**
- * hdmi_codec_set_jack_detect - register HDMI plugged callback
- * @component: the hdmi-codec instance
- * @jack: ASoC jack to report (dis)connection events on
- */
-int hdmi_codec_set_jack_detect(struct snd_soc_component *component,
- struct snd_soc_jack *jack)
+static int hdmi_codec_set_jack(struct snd_soc_component *component,
+ struct snd_soc_jack *jack,
+ void *data)
{
struct hdmi_codec_priv *hcp = snd_soc_component_get_drvdata(component);
int ret = -EOPNOTSUPP;
@@ -720,7 +716,6 @@ int hdmi_codec_set_jack_detect(struct snd_soc_component *component,
}
return ret;
}
-EXPORT_SYMBOL_GPL(hdmi_codec_set_jack_detect);
static int hdmi_dai_spdif_probe(struct snd_soc_dai *dai)
{
@@ -806,6 +801,7 @@ static const struct snd_soc_component_driver hdmi_driver = {
.use_pmdown_time = 1,
.endianness = 1,
.non_legacy_dai_naming = 1,
+ .set_jack = hdmi_codec_set_jack,
};
static int hdmi_codec_probe(struct platform_device *pdev)
diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
index 347b095d478d..c28ebf891cb0 100644
--- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c
+++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c
@@ -11,7 +11,6 @@
#include <linux/of_gpio.h>
#include <sound/soc.h>
#include <sound/jack.h>
-#include <sound/hdmi-codec.h>
#include "../../codecs/rt5645.h"
#define MCLK_FOR_CODECS 12288000
@@ -154,8 +153,8 @@ static int mt8173_rt5650_hdmi_init(struct snd_soc_pcm_runtime *rtd)
if (ret)
return ret;
- return hdmi_codec_set_jack_detect(asoc_rtd_to_codec(rtd, 0)->component,
- &mt8173_rt5650_hdmi_jack);
+ return snd_soc_component_set_jack(asoc_rtd_to_codec(rtd, 0)->component,
+ &mt8173_rt5650_hdmi_jack, NULL);
}
enum {
diff --git a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
index 06d0a4f80fc1..e53c6200d5a7 100644
--- a/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-da7219-max98357.c
@@ -10,7 +10,6 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
-#include <sound/hdmi-codec.h>
#include <sound/jack.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -369,8 +368,8 @@ static int mt8183_da7219_max98357_hdmi_init(struct snd_soc_pcm_runtime *rtd)
if (ret)
return ret;
- return hdmi_codec_set_jack_detect(asoc_rtd_to_codec(rtd, 0)->component,
- &priv->hdmi_jack);
+ return snd_soc_component_set_jack(asoc_rtd_to_codec(rtd, 0)->component,
+ &priv->hdmi_jack, NULL);
}
static struct snd_soc_dai_link mt8183_da7219_dai_links[] = {
diff --git a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
index 07410d7afaa9..327dfad41e31 100644
--- a/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
+++ b/sound/soc/mediatek/mt8183/mt8183-mt6358-ts3a227-max98357.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
-#include <sound/hdmi-codec.h>
#include <sound/jack.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -350,8 +349,8 @@ mt8183_mt6358_ts3a227_max98357_hdmi_init(struct snd_soc_pcm_runtime *rtd)
if (ret)
return ret;
- return hdmi_codec_set_jack_detect(asoc_rtd_to_codec(rtd, 0)->component,
- &priv->hdmi_jack);
+ return snd_soc_component_set_jack(asoc_rtd_to_codec(rtd, 0)->component,
+ &priv->hdmi_jack, NULL);
}
static struct snd_soc_dai_link mt8183_mt6358_ts3a227_dai_links[] = {
diff --git a/sound/soc/rockchip/rockchip_max98090.c b/sound/soc/rockchip/rockchip_max98090.c
index 9acfd024aa5d..c8f1a28a92b7 100644
--- a/sound/soc/rockchip/rockchip_max98090.c
+++ b/sound/soc/rockchip/rockchip_max98090.c
@@ -12,7 +12,6 @@
#include <linux/gpio.h>
#include <linux/of_gpio.h>
#include <sound/core.h>
-#include <sound/hdmi-codec.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -238,7 +237,7 @@ static int rk_hdmi_init(struct snd_soc_pcm_runtime *runtime)
return ret;
}
- return hdmi_codec_set_jack_detect(component, &rk_hdmi_jack);
+ return snd_soc_component_set_jack(component, &rk_hdmi_jack, NULL);
}
/* max98090 dai_link */
--
2.28.0.618.gf4bc123cb7-goog
Add devicetree bindings documentation file for sc7180 sound card.
Signed-off-by: Cheng-Yi Chiang <[email protected]>
---
.../bindings/sound/qcom,sc7180.yaml | 130 ++++++++++++++++++
1 file changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
diff --git a/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
new file mode 100644
index 000000000000..a1fc53e33b07
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,sc7180.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,sc7180.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc. SC7180 ASoC sound card driver
+
+maintainers:
+ - Rohit kumar <[email protected]>
+ - Cheng-Yi Chiang <[email protected]>
+
+description:
+ This binding describes the SC7180 sound card which uses LPASS for audio.
+
+properties:
+ compatible:
+ const: qcom,sc7180-sndcard
+
+ audio-routing:
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ description:
+ A list of the connections between audio components. Each entry is a
+ pair of strings, the first being the connection's sink, the second
+ being the connection's source.
+
+ model:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: User specified audio sound card name
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^dai-link(@[0-9])?$":
+ description:
+ Each subnode represents a dai link. Subnodes of each dai links would be
+ cpu/codec dais.
+
+ type: object
+
+ properties:
+ link-name:
+ description: Indicates dai-link name and PCM stream name.
+ $ref: /schemas/types.yaml#/definitions/string
+ maxItems: 1
+
+ reg:
+ description: dai link address.
+
+ cpu:
+ description: Holds subnode which indicates cpu dai.
+ type: object
+ properties:
+ sound-dai: true
+
+ codec:
+ description: Holds subnode which indicates codec dai.
+ type: object
+ properties:
+ sound-dai: true
+
+ required:
+ - link-name
+ - cpu
+ - codec
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - model
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+
+ - |
+ sound {
+ compatible = "qcom,sc7180-sndcard";
+ model = "sc7180-snd-card";
+
+ audio-routing =
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MultiMedia0";
+ reg = <0>;
+ cpu {
+ sound-dai = <&lpass_cpu 0>;
+ };
+
+ codec {
+ sound-dai = <&alc5682 0>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "MultiMedia1";
+ reg = <1>;
+ cpu {
+ sound-dai = <&lpass_cpu 1>;
+ };
+
+ codec {
+ sound-dai = <&max98357a>;
+ };
+ };
+
+ dai-link@2 {
+ link-name = "MultiMedia2";
+ reg = <2>;
+ cpu {
+ sound-dai = <&lpass_hdmi 0>;
+ };
+
+ codec {
+ sound-dai = <&msm_dp>;
+ };
+ };
+ };
--
2.28.0.618.gf4bc123cb7-goog
On 11/09/2020 11:22, Cheng-Yi Chiang wrote:
> From: Ajit Pandey <[email protected]>
>
> Add new driver to register sound card on sc7180 trogdor board and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S interfaces.
>
> Signed-off-by: Ajit Pandey <[email protected]>
> Signed-off-by: Cheng-Yi Chiang <[email protected]>
> ---
> sound/soc/qcom/Kconfig | 12 ++
> sound/soc/qcom/Makefile | 2 +
> sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 281 insertions(+)
> create mode 100644 sound/soc/qcom/sc7180.c
>
...
>
> obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
> obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
> obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
> +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
> obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
>
> #DSP lib
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..40bc4fc98842
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,267 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> +//
> +// sc7180.c -- ALSA SoC Machine driver for SC7180
> +
> +#include <dt-bindings/sound/sc7180-lpass.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
Do you need this header?
> +#include <sound/soc.h>
> +#include <uapi/linux/input-event-codes.h>
> +
> +#include "../codecs/rt5682.h"
> +#include "common.h"
> +#include "lpass.h"
> +
> +#define DEFAULT_SAMPLE_RATE_48K 48000
Looks like ^ is Not used!
Overall the driver looks much cleaner now!
Also to make progress on this patch, may be you add define for HDMI with
a comment!
Once unused remove, pl feel free to add !
Reviewed-by: Srinivas Kandagatla <[email protected]>
--srini
> +#define DEFAULT_MCLK_RATE 19200000
> +#define RT5682_PLL1_FREQ (48000 * 512)
> +
> +struct sc7180_snd_data {
> + u32 pri_mi2s_clk_count;
> + struct snd_soc_jack hs_jack;
> + struct snd_soc_jack hdmi_jack;
> +};
> +
> +static void sc7180_jack_free(struct snd_jack *jack)
> +{
> + struct snd_soc_component *component = jack->private_data;
> +
> + snd_soc_component_set_jack(component, NULL, NULL);
> +}
> +
> +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> + struct snd_soc_component *component = codec_dai->component;
> + struct snd_jack *jack;
> + int rval;
> +
> + rval = snd_soc_card_jack_new(
> + card, "Headset Jack",
> + SND_JACK_HEADSET |
> + SND_JACK_HEADPHONE |
> + SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> + SND_JACK_BTN_2 | SND_JACK_BTN_3,
> + &pdata->hs_jack, NULL, 0);
> +
> + if (rval < 0) {
> + dev_err(card->dev, "Unable to add Headset Jack\n");
> + return rval;
> + }
> +
> + jack = pdata->hs_jack.jack;
> +
> + snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> + snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> + snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> + snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> +
> + jack->private_data = component;
> + jack->private_free = sc7180_jack_free;
> +
> + return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> +}
> +
> +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> + struct snd_soc_component *component = codec_dai->component;
> + struct snd_jack *jack;
> + int rval;
> +
> + rval = snd_soc_card_jack_new(
> + card, "HDMI Jack",
> + SND_JACK_LINEOUT,
> + &pdata->hdmi_jack, NULL, 0);
> +
> + if (rval < 0) {
> + dev_err(card->dev, "Unable to add HDMI Jack\n");
> + return rval;
> + }
> +
> + jack = pdata->hdmi_jack.jack;
> + jack->private_data = component;
> + jack->private_free = sc7180_jack_free;
> +
> + return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> +}
> +
> +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> + switch (cpu_dai->id) {
> + case MI2S_PRIMARY:
> + return sc7180_headset_init(rtd);
> + case MI2S_SECONDARY:
> + return 0;
> + case HDMI:
> + return sc7180_hdmi_init(rtd);
> + default:
> + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> + cpu_dai->id);
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> + int ret;
> +
> + switch (cpu_dai->id) {
> + case MI2S_PRIMARY:
> + if (++data->pri_mi2s_clk_count == 1) {
> + snd_soc_dai_set_sysclk(cpu_dai,
> + LPASS_MCLK0,
> + DEFAULT_MCLK_RATE,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + }
> +
> + snd_soc_dai_set_fmt(codec_dai,
> + SND_SOC_DAIFMT_CBS_CFS |
> + SND_SOC_DAIFMT_NB_NF |
> + SND_SOC_DAIFMT_I2S);
> +
> + /* Configure PLL1 for codec */
> + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> + DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> + if (ret) {
> + dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> + return ret;
> + }
> +
> + /* Configure sysclk for codec */
> + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> + RT5682_PLL1_FREQ,
> + SND_SOC_CLOCK_IN);
> + if (ret)
> + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> + ret);
> +
> + break;
> + case MI2S_SECONDARY:
> + break;
> + case HDMI:
> + break;
> + default:
> + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> + cpu_dai->id);
> + return -EINVAL;
> + }
> + return 0;
> +}
> +
> +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> + switch (cpu_dai->id) {
> + case MI2S_PRIMARY:
> + if (--data->pri_mi2s_clk_count == 0) {
> + snd_soc_dai_set_sysclk(cpu_dai,
> + LPASS_MCLK0,
> + 0,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + }
> + break;
> + case MI2S_SECONDARY:
> + break;
> + case HDMI:
> + break;
> + default:
> + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> + cpu_dai->id);
> + break;
> + }
> +}
> +
> +static const struct snd_soc_ops sc7180_ops = {
> + .startup = sc7180_snd_startup,
> + .shutdown = sc7180_snd_shutdown,
> +};
> +
> +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> + SND_SOC_DAPM_HP("Headphone Jack", NULL),
> + SND_SOC_DAPM_MIC("Headset Mic", NULL),
> +};
> +
> +static struct snd_soc_card sc7180_card = {
> + .owner = THIS_MODULE,
> + .dapm_widgets = sc7180_snd_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
> +};
> +
> +static void sc7180_add_ops(struct snd_soc_card *card)
> +{
> + struct snd_soc_dai_link *link;
> + int i;
> +
> + for_each_card_prelinks(card, i, link) {
> + link->ops = &sc7180_ops;
> + link->init = sc7180_init;
> + }
> +}
> +
> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> + struct snd_soc_card *card = &sc7180_card;
> + struct sc7180_snd_data *data;
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + /* Allocate the private data */
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + card->dev = dev;
> + snd_soc_card_set_drvdata(card, data);
> +
> + ret = qcom_snd_parse_of(card);
> + if (ret) {
> + dev_err(dev, "Error parsing OF data\n");
> + return ret;
> + }
> +
> + sc7180_add_ops(card);
> +
> + return devm_snd_soc_register_card(dev, card);
> +}
> +
> +static const struct of_device_id sc7180_snd_device_id[] = {
> + { .compatible = "qcom,sc7180-sndcard" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> +
> +static struct platform_driver sc7180_snd_driver = {
> + .probe = sc7180_snd_platform_probe,
> + .driver = {
> + .name = "msm-snd-sc7180",
> + .of_match_table = sc7180_snd_device_id,
> + },
> +};
> +module_platform_driver(sc7180_snd_driver);
> +
> +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> +MODULE_LICENSE("GPL v2");
>
Hi,
Thanks for removing the weird use of auxilliary devices :)
On Fri, Sep 11, 2020 at 06:22:59PM +0800, Cheng-Yi Chiang wrote:
> From: Ajit Pandey <[email protected]>
>
> Add new driver to register sound card on sc7180 trogdor board and
> do the required configuration for lpass cpu dai and external codecs
> connected over MI2S interfaces.
>
> Signed-off-by: Ajit Pandey <[email protected]>
> Signed-off-by: Cheng-Yi Chiang <[email protected]>
> ---
> sound/soc/qcom/Kconfig | 12 ++
> sound/soc/qcom/Makefile | 2 +
> sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 281 insertions(+)
> create mode 100644 sound/soc/qcom/sc7180.c
>
> diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> index a607ace8b089..0459185ee243 100644
> --- a/sound/soc/qcom/Kconfig
> +++ b/sound/soc/qcom/Kconfig
> @@ -116,4 +116,16 @@ config SND_SOC_SDM845
> SDM845 SoC-based systems.
> Say Y if you want to use audio device on this SoCs.
>
> +config SND_SOC_SC7180
> + tristate "SoC Machine driver for SC7180 boards"
> + depends on I2C
> + select SND_SOC_QCOM_COMMON
> + select SND_SOC_LPASS_SC7180
> + select SND_SOC_MAX98357A
> + select SND_SOC_RT5682_I2C
> + help
> + To add support for audio on Qualcomm Technologies Inc.
> + SC7180 SoC-based systems.
> + Say Y if you want to use audio device on this SoCs.
> +
> endif #SND_SOC_QCOM
> diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
> index 7972c9479ab0..0cdcbf367ef1 100644
> --- a/sound/soc/qcom/Makefile
> +++ b/sound/soc/qcom/Makefile
> @@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o
> snd-soc-apq8016-sbc-objs := apq8016_sbc.o
> snd-soc-apq8096-objs := apq8096.o
> snd-soc-sdm845-objs := sdm845.o
> +snd-soc-sc7180-objs := sc7180.o
> snd-soc-qcom-common-objs := common.o
>
> obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
> obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
> obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
> +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
> obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
>
> #DSP lib
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..40bc4fc98842
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,267 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +//
> +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> +//
> +// sc7180.c -- ALSA SoC Machine driver for SC7180
> +
> +#include <dt-bindings/sound/sc7180-lpass.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <sound/core.h>
> +#include <sound/jack.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <uapi/linux/input-event-codes.h>
> +
> +#include "../codecs/rt5682.h"
> +#include "common.h"
> +#include "lpass.h"
> +
> +#define DEFAULT_SAMPLE_RATE_48K 48000
> +#define DEFAULT_MCLK_RATE 19200000
> +#define RT5682_PLL1_FREQ (48000 * 512)
> +
> +struct sc7180_snd_data {
> + u32 pri_mi2s_clk_count;
> + struct snd_soc_jack hs_jack;
> + struct snd_soc_jack hdmi_jack;
> +};
[...]
> +
> +static const struct snd_soc_ops sc7180_ops = {
> + .startup = sc7180_snd_startup,
> + .shutdown = sc7180_snd_shutdown,
> +};
> +
> +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> + SND_SOC_DAPM_HP("Headphone Jack", NULL),
> + SND_SOC_DAPM_MIC("Headset Mic", NULL),
> +};
> +
> +static struct snd_soc_card sc7180_card = {
> + .owner = THIS_MODULE,
> + .dapm_widgets = sc7180_snd_widgets,
> + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
> +};
Given that you modify this struct and already allocate some memory
dynamically (sc7810_snd_data), it might be a bit cleaner to avoid
modifying global memory and instead allocate snd_soc_card dynamically as
well. Could just add it to sc7180_snd_data for example (see e.g. apq8016_sbc)
> +
> +static void sc7180_add_ops(struct snd_soc_card *card)
> +{
> + struct snd_soc_dai_link *link;
> + int i;
> +
> + for_each_card_prelinks(card, i, link) {
> + link->ops = &sc7180_ops;
> + link->init = sc7180_init;
> + }
> +}
> +
> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> + struct snd_soc_card *card = &sc7180_card;
> + struct sc7180_snd_data *data;
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + /* Allocate the private data */
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + card->dev = dev;
> + snd_soc_card_set_drvdata(card, data);
> +
> + ret = qcom_snd_parse_of(card);
> + if (ret) {
> + dev_err(dev, "Error parsing OF data\n");
This will just add noise in case of probe deferral. qcom_snd_parse_of()
already logs a message for most errors so you can just remove this one.
> + return ret;
> + }
> +
> + sc7180_add_ops(card);
> +
> + return devm_snd_soc_register_card(dev, card);
> +}
> +
> +static const struct of_device_id sc7180_snd_device_id[] = {
> + { .compatible = "qcom,sc7180-sndcard" },
Will all SC7180 use the configuration in this driver? (With RT5682,
HDMI, the jack configuration etc). Otherwise a more specific compatible
string might be better, so other device-specific ones can be added later.
Thanks!
Stephan
On Fri, Sep 11, 2020 at 7:05 PM Srinivas Kandagatla
<[email protected]> wrote:
>
>
>
> On 11/09/2020 11:22, Cheng-Yi Chiang wrote:
> > From: Ajit Pandey <[email protected]>
> >
> > Add new driver to register sound card on sc7180 trogdor board and
> > do the required configuration for lpass cpu dai and external codecs
> > connected over MI2S interfaces.
> >
> > Signed-off-by: Ajit Pandey <[email protected]>
> > Signed-off-by: Cheng-Yi Chiang <[email protected]>
> > ---
> > sound/soc/qcom/Kconfig | 12 ++
> > sound/soc/qcom/Makefile | 2 +
> > sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 281 insertions(+)
> > create mode 100644 sound/soc/qcom/sc7180.c
> >
> ...
> >
> > obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
> > obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
> > obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> > obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
> > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
> > obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
> >
> > #DSP lib
> > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> > new file mode 100644
> > index 000000000000..40bc4fc98842
> > --- /dev/null
> > +++ b/sound/soc/qcom/sc7180.c
> > @@ -0,0 +1,267 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +//
> > +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> > +//
> > +// sc7180.c -- ALSA SoC Machine driver for SC7180
> > +
> > +#include <dt-bindings/sound/sc7180-lpass.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <sound/core.h>
> > +#include <sound/jack.h>
> > +#include <sound/pcm.h>
> > +#include <sound/pcm_params.h>
> Do you need this header?
>
Hi Srinivas, thanks for taking a closer look!
I will remove it in v10.
>
> > +#include <sound/soc.h>
> > +#include <uapi/linux/input-event-codes.h>
> > +
> > +#include "../codecs/rt5682.h"
> > +#include "common.h"
> > +#include "lpass.h"
> > +
> > +#define DEFAULT_SAMPLE_RATE_48K 48000
>
> Looks like ^ is Not used!
>
I will remove it in v10.
>
> Overall the driver looks much cleaner now!
>
> Also to make progress on this patch, may be you add define for HDMI with
> a comment!
After discussion with Srinivasa Rao, we plan to use a new name that is
more specific to lpass-sc7180 DP dai:
// This will be defined in include/dt-bindings/sound/sc7180-lpass.h
#define SC7180_LPASS_DP 2
Do you think it is okay ?
Thanks!
>
> Once unused remove, pl feel free to add !
>
> Reviewed-by: Srinivas Kandagatla <[email protected]>
>
>
> --srini
>
>
> > +#define DEFAULT_MCLK_RATE 19200000
> > +#define RT5682_PLL1_FREQ (48000 * 512)
> > +
> > +struct sc7180_snd_data {
> > + u32 pri_mi2s_clk_count;
> > + struct snd_soc_jack hs_jack;
> > + struct snd_soc_jack hdmi_jack;
> > +};
> > +
> > +static void sc7180_jack_free(struct snd_jack *jack)
> > +{
> > + struct snd_soc_component *component = jack->private_data;
> > +
> > + snd_soc_component_set_jack(component, NULL, NULL);
> > +}
> > +
> > +static int sc7180_headset_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > + struct snd_soc_component *component = codec_dai->component;
> > + struct snd_jack *jack;
> > + int rval;
> > +
> > + rval = snd_soc_card_jack_new(
> > + card, "Headset Jack",
> > + SND_JACK_HEADSET |
> > + SND_JACK_HEADPHONE |
> > + SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> > + SND_JACK_BTN_2 | SND_JACK_BTN_3,
> > + &pdata->hs_jack, NULL, 0);
> > +
> > + if (rval < 0) {
> > + dev_err(card->dev, "Unable to add Headset Jack\n");
> > + return rval;
> > + }
> > +
> > + jack = pdata->hs_jack.jack;
> > +
> > + snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> > + snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> > + snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> > + snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> > +
> > + jack->private_data = component;
> > + jack->private_free = sc7180_jack_free;
> > +
> > + return snd_soc_component_set_jack(component, &pdata->hs_jack, NULL);
> > +}
> > +
> > +static int sc7180_hdmi_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > + struct snd_soc_component *component = codec_dai->component;
> > + struct snd_jack *jack;
> > + int rval;
> > +
> > + rval = snd_soc_card_jack_new(
> > + card, "HDMI Jack",
> > + SND_JACK_LINEOUT,
> > + &pdata->hdmi_jack, NULL, 0);
> > +
> > + if (rval < 0) {
> > + dev_err(card->dev, "Unable to add HDMI Jack\n");
> > + return rval;
> > + }
> > +
> > + jack = pdata->hdmi_jack.jack;
> > + jack->private_data = component;
> > + jack->private_free = sc7180_jack_free;
> > +
> > + return snd_soc_component_set_jack(component, &pdata->hdmi_jack, NULL);
> > +}
> > +
> > +static int sc7180_init(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > +
> > + switch (cpu_dai->id) {
> > + case MI2S_PRIMARY:
> > + return sc7180_headset_init(rtd);
> > + case MI2S_SECONDARY:
> > + return 0;
> > + case HDMI:
> > + return sc7180_hdmi_init(rtd);
> > + default:
> > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > + cpu_dai->id);
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> > +{
> > + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> > + int ret;
> > +
> > + switch (cpu_dai->id) {
> > + case MI2S_PRIMARY:
> > + if (++data->pri_mi2s_clk_count == 1) {
> > + snd_soc_dai_set_sysclk(cpu_dai,
> > + LPASS_MCLK0,
> > + DEFAULT_MCLK_RATE,
> > + SNDRV_PCM_STREAM_PLAYBACK);
> > + }
> > +
> > + snd_soc_dai_set_fmt(codec_dai,
> > + SND_SOC_DAIFMT_CBS_CFS |
> > + SND_SOC_DAIFMT_NB_NF |
> > + SND_SOC_DAIFMT_I2S);
> > +
> > + /* Configure PLL1 for codec */
> > + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> > + DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> > + if (ret) {
> > + dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* Configure sysclk for codec */
> > + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> > + RT5682_PLL1_FREQ,
> > + SND_SOC_CLOCK_IN);
> > + if (ret)
> > + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> > + ret);
> > +
> > + break;
> > + case MI2S_SECONDARY:
> > + break;
> > + case HDMI:
> > + break;
> > + default:
> > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > + cpu_dai->id);
> > + return -EINVAL;
> > + }
> > + return 0;
> > +}
> > +
> > +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> > +{
> > + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > + struct snd_soc_card *card = rtd->card;
> > + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> > + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> > +
> > + switch (cpu_dai->id) {
> > + case MI2S_PRIMARY:
> > + if (--data->pri_mi2s_clk_count == 0) {
> > + snd_soc_dai_set_sysclk(cpu_dai,
> > + LPASS_MCLK0,
> > + 0,
> > + SNDRV_PCM_STREAM_PLAYBACK);
> > + }
> > + break;
> > + case MI2S_SECONDARY:
> > + break;
> > + case HDMI:
> > + break;
> > + default:
> > + dev_err(rtd->dev, "%s: invalid dai id 0x%x\n", __func__,
> > + cpu_dai->id);
> > + break;
> > + }
> > +}
> > +
> > +static const struct snd_soc_ops sc7180_ops = {
> > + .startup = sc7180_snd_startup,
> > + .shutdown = sc7180_snd_shutdown,
> > +};
> > +
> > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> > + SND_SOC_DAPM_HP("Headphone Jack", NULL),
> > + SND_SOC_DAPM_MIC("Headset Mic", NULL),
> > +};
> > +
> > +static struct snd_soc_card sc7180_card = {
> > + .owner = THIS_MODULE,
> > + .dapm_widgets = sc7180_snd_widgets,
> > + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
> > +};
> > +
> > +static void sc7180_add_ops(struct snd_soc_card *card)
> > +{
> > + struct snd_soc_dai_link *link;
> > + int i;
> > +
> > + for_each_card_prelinks(card, i, link) {
> > + link->ops = &sc7180_ops;
> > + link->init = sc7180_init;
> > + }
> > +}
> > +
> > +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> > +{
> > + struct snd_soc_card *card = &sc7180_card;
> > + struct sc7180_snd_data *data;
> > + struct device *dev = &pdev->dev;
> > + int ret;
> > +
> > + /* Allocate the private data */
> > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + card->dev = dev;
> > + snd_soc_card_set_drvdata(card, data);
> > +
> > + ret = qcom_snd_parse_of(card);
> > + if (ret) {
> > + dev_err(dev, "Error parsing OF data\n");
> > + return ret;
> > + }
> > +
> > + sc7180_add_ops(card);
> > +
> > + return devm_snd_soc_register_card(dev, card);
> > +}
> > +
> > +static const struct of_device_id sc7180_snd_device_id[] = {
> > + { .compatible = "qcom,sc7180-sndcard" },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, sc7180_snd_device_id);
> > +
> > +static struct platform_driver sc7180_snd_driver = {
> > + .probe = sc7180_snd_platform_probe,
> > + .driver = {
> > + .name = "msm-snd-sc7180",
> > + .of_match_table = sc7180_snd_device_id,
> > + },
> > +};
> > +module_platform_driver(sc7180_snd_driver);
> > +
> > +MODULE_DESCRIPTION("sc7180 ASoC Machine Driver");
> > +MODULE_LICENSE("GPL v2");
> >
On Fri, Sep 11, 2020 at 11:01 PM Stephan Gerhold <[email protected]> wrote:
>
> Hi,
>
> Thanks for removing the weird use of auxilliary devices :)
>
Hi Stephan,
Thanks for the suggestion!
> On Fri, Sep 11, 2020 at 06:22:59PM +0800, Cheng-Yi Chiang wrote:
> > From: Ajit Pandey <[email protected]>
> >
> > Add new driver to register sound card on sc7180 trogdor board and
> > do the required configuration for lpass cpu dai and external codecs
> > connected over MI2S interfaces.
> >
> > Signed-off-by: Ajit Pandey <[email protected]>
> > Signed-off-by: Cheng-Yi Chiang <[email protected]>
> > ---
> > sound/soc/qcom/Kconfig | 12 ++
> > sound/soc/qcom/Makefile | 2 +
> > sound/soc/qcom/sc7180.c | 267 ++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 281 insertions(+)
> > create mode 100644 sound/soc/qcom/sc7180.c
> >
> > diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
> > index a607ace8b089..0459185ee243 100644
> > --- a/sound/soc/qcom/Kconfig
> > +++ b/sound/soc/qcom/Kconfig
> > @@ -116,4 +116,16 @@ config SND_SOC_SDM845
> > SDM845 SoC-based systems.
> > Say Y if you want to use audio device on this SoCs.
> >
> > +config SND_SOC_SC7180
> > + tristate "SoC Machine driver for SC7180 boards"
> > + depends on I2C
> > + select SND_SOC_QCOM_COMMON
> > + select SND_SOC_LPASS_SC7180
> > + select SND_SOC_MAX98357A
> > + select SND_SOC_RT5682_I2C
> > + help
> > + To add support for audio on Qualcomm Technologies Inc.
> > + SC7180 SoC-based systems.
> > + Say Y if you want to use audio device on this SoCs.
> > +
> > endif #SND_SOC_QCOM
> > diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile
> > index 7972c9479ab0..0cdcbf367ef1 100644
> > --- a/sound/soc/qcom/Makefile
> > +++ b/sound/soc/qcom/Makefile
> > @@ -17,12 +17,14 @@ snd-soc-storm-objs := storm.o
> > snd-soc-apq8016-sbc-objs := apq8016_sbc.o
> > snd-soc-apq8096-objs := apq8096.o
> > snd-soc-sdm845-objs := sdm845.o
> > +snd-soc-sc7180-objs := sc7180.o
> > snd-soc-qcom-common-objs := common.o
> >
> > obj-$(CONFIG_SND_SOC_STORM) += snd-soc-storm.o
> > obj-$(CONFIG_SND_SOC_APQ8016_SBC) += snd-soc-apq8016-sbc.o
> > obj-$(CONFIG_SND_SOC_MSM8996) += snd-soc-apq8096.o
> > obj-$(CONFIG_SND_SOC_SDM845) += snd-soc-sdm845.o
> > +obj-$(CONFIG_SND_SOC_SC7180) += snd-soc-sc7180.o
> > obj-$(CONFIG_SND_SOC_QCOM_COMMON) += snd-soc-qcom-common.o
> >
> > #DSP lib
> > diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> > new file mode 100644
> > index 000000000000..40bc4fc98842
> > --- /dev/null
> > +++ b/sound/soc/qcom/sc7180.c
> > @@ -0,0 +1,267 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +//
> > +// Copyright (c) 2020, The Linux Foundation. All rights reserved.
> > +//
> > +// sc7180.c -- ALSA SoC Machine driver for SC7180
> > +
> > +#include <dt-bindings/sound/sc7180-lpass.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <sound/core.h>
> > +#include <sound/jack.h>
> > +#include <sound/pcm.h>
> > +#include <sound/pcm_params.h>
> > +#include <sound/soc.h>
> > +#include <uapi/linux/input-event-codes.h>
> > +
> > +#include "../codecs/rt5682.h"
> > +#include "common.h"
> > +#include "lpass.h"
> > +
> > +#define DEFAULT_SAMPLE_RATE_48K 48000
> > +#define DEFAULT_MCLK_RATE 19200000
> > +#define RT5682_PLL1_FREQ (48000 * 512)
> > +
> > +struct sc7180_snd_data {
> > + u32 pri_mi2s_clk_count;
> > + struct snd_soc_jack hs_jack;
> > + struct snd_soc_jack hdmi_jack;
> > +};
>
> [...]
>
> > +
> > +static const struct snd_soc_ops sc7180_ops = {
> > + .startup = sc7180_snd_startup,
> > + .shutdown = sc7180_snd_shutdown,
> > +};
> > +
> > +static const struct snd_soc_dapm_widget sc7180_snd_widgets[] = {
> > + SND_SOC_DAPM_HP("Headphone Jack", NULL),
> > + SND_SOC_DAPM_MIC("Headset Mic", NULL),
> > +};
> > +
> > +static struct snd_soc_card sc7180_card = {
> > + .owner = THIS_MODULE,
> > + .dapm_widgets = sc7180_snd_widgets,
> > + .num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets),
> > +};
>
> Given that you modify this struct and already allocate some memory
> dynamically (sc7810_snd_data), it might be a bit cleaner to avoid
> modifying global memory and instead allocate snd_soc_card dynamically as
> well. Could just add it to sc7180_snd_data for example (see e.g. apq8016_sbc)
>
Good idea. I will modify it in v10.
> > +
> > +static void sc7180_add_ops(struct snd_soc_card *card)
> > +{
> > + struct snd_soc_dai_link *link;
> > + int i;
> > +
> > + for_each_card_prelinks(card, i, link) {
> > + link->ops = &sc7180_ops;
> > + link->init = sc7180_init;
> > + }
> > +}
> > +
> > +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> > +{
> > + struct snd_soc_card *card = &sc7180_card;
> > + struct sc7180_snd_data *data;
> > + struct device *dev = &pdev->dev;
> > + int ret;
> > +
> > + /* Allocate the private data */
> > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> > + if (!data)
> > + return -ENOMEM;
> > +
> > + card->dev = dev;
> > + snd_soc_card_set_drvdata(card, data);
> > +
> > + ret = qcom_snd_parse_of(card);
> > + if (ret) {
> > + dev_err(dev, "Error parsing OF data\n");
>
> This will just add noise in case of probe deferral. qcom_snd_parse_of()
> already logs a message for most errors so you can just remove this one.
>
I will remove it in v10.
> > + return ret;
> > + }
> > +
> > + sc7180_add_ops(card);
> > +
> > + return devm_snd_soc_register_card(dev, card);
> > +}
> > +
> > +static const struct of_device_id sc7180_snd_device_id[] = {
> > + { .compatible = "qcom,sc7180-sndcard" },
>
> Will all SC7180 use the configuration in this driver? (With RT5682,
> HDMI, the jack configuration etc). Otherwise a more specific compatible
> string might be better, so other device-specific ones can be added later.
>
I thought we can do that in the next patch when we want to introduce
different board variations.
But maybe doing it earlier is better.
There will be three variations on trogdor:
rt5682 (1mic), max98357, dp
rt5682 (2mic), max98357, dp
adau7002, max98357, dp
I would like to name them
qcom,sc7180-sndcard-rt5682-m98357-1mic
qcom,sc7180-sndcard-rt5682-m98357-2mic
qcom,sc7180-sndcard-ad7002-m98357
What do you think ?
Thanks for the review and suggestions!
> Thanks!
> Stephan