The value of property 'clock-cells' is not determined only by the number of
clock outputs in one clock node, it is actually determined by whether the
clock output in this node can be referenced directly without index. If
the output clock has to be referenced by a index, the clock-cell of this
clock node can't be defined 0.
Signed-off-by: Chunyan Zhang <[email protected]>
---
Documentation/devicetree/bindings/clock/clock-bindings.txt | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 2ec489e..cef3db5 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -15,8 +15,14 @@ value of a #clock-cells property in the clock provider node.
Required properties:
#clock-cells: Number of cells in a clock specifier; Typically 0 for nodes
- with a single clock output and 1 for nodes with multiple
- clock outputs.
+ with a single clock output and it must be able to be
+ referenced without index, and 1 for nodes with single or
+ multiple clock outputs which have to be referenced by index.
+
+ Please note that if a node with a single clock output
+ but it has "clock-indices" property (see bellow), it has
+ to be referenced by index, its "#clock-cells" cannot be
+ defined 0.
Optional properties:
clock-output-names: Recommended to be a list of strings of clock output signal
--
2.7.4
On 06/01, Chunyan Zhang wrote:
> The value of property 'clock-cells' is not determined only by the number of
> clock outputs in one clock node, it is actually determined by whether the
> clock output in this node can be referenced directly without index. If
> the output clock has to be referenced by a index, the clock-cell of this
> clock node can't be defined 0.
>
> Signed-off-by: Chunyan Zhang <[email protected]>
> ---
> Documentation/devicetree/bindings/clock/clock-bindings.txt | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
I'm leaving this patch for Rob/DT maintainers to apply.
>
> diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> index 2ec489e..cef3db5 100644
> --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
> +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
> @@ -15,8 +15,14 @@ value of a #clock-cells property in the clock provider node.
>
> Required properties:
> #clock-cells: Number of cells in a clock specifier; Typically 0 for nodes
> - with a single clock output and 1 for nodes with multiple
> - clock outputs.
> + with a single clock output and it must be able to be
> + referenced without index, and 1 for nodes with single or
> + multiple clock outputs which have to be referenced by index.
> +
> + Please note that if a node with a single clock output
> + but it has "clock-indices" property (see bellow), it has
> + to be referenced by index, its "#clock-cells" cannot be
> + defined 0.
Maybe this should be added to the clock-indices area of the
document instead of here? It seems to me that you can't have
clock-indices if you have #clock-cells=<0>, and that's sort of
obvious because 0 cells means 1 output and >0 cells means
potentially many outputs.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hi Stephen,
On 3 June 2017 at 06:56, Stephen Boyd <[email protected]> wrote:
> On 06/01, Chunyan Zhang wrote:
>> The value of property 'clock-cells' is not determined only by the number of
>> clock outputs in one clock node, it is actually determined by whether the
>> clock output in this node can be referenced directly without index. If
>> the output clock has to be referenced by a index, the clock-cell of this
>> clock node can't be defined 0.
>>
>> Signed-off-by: Chunyan Zhang <[email protected]>
>> ---
>> Documentation/devicetree/bindings/clock/clock-bindings.txt | 10 ++++++++--
>> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> I'm leaving this patch for Rob/DT maintainers to apply.
>
>>
>> diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
>> index 2ec489e..cef3db5 100644
>> --- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
>> +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
>> @@ -15,8 +15,14 @@ value of a #clock-cells property in the clock provider node.
>>
>> Required properties:
>> #clock-cells: Number of cells in a clock specifier; Typically 0 for nodes
>> - with a single clock output and 1 for nodes with multiple
>> - clock outputs.
>> + with a single clock output and it must be able to be
>> + referenced without index, and 1 for nodes with single or
>> + multiple clock outputs which have to be referenced by index.
>> +
>> + Please note that if a node with a single clock output
>> + but it has "clock-indices" property (see bellow), it has
>> + to be referenced by index, its "#clock-cells" cannot be
>> + defined 0.
>
> Maybe this should be added to the clock-indices area of the
> document instead of here? It seems to me that you can't have
> clock-indices if you have #clock-cells=<0>, and that's sort of
> obvious because 0 cells means 1 output and >0 cells means
> potentially many outputs.
Sorry for not being able to document clear enough.
Let me try to explain why I added this paragraph here rather than
clock-indices area.
The sentence "0 for nodes with a single clock output" made me confused.
In the platform I'm working on, some clock has a single clock output
though, the identifying number for the clock output , #clock-cells
cannot be set 0.
I just wanted to make this sort of cases being cleared. My point was
that clock-cells with zero was not for all kinds of clocks which has
one single output.
I tried to rewrite the description below, would it be better? :)
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -18,6 +18,9 @@ Required properties:
with a single clock output and 1 for nodes with multiple
clock outputs.
+ There's one exception, please see the description for
+ clock-indices below.
+
Optional properties:
clock-output-names: Recommended to be a list of strings of clock output signal
names indexed by the first cell in the clock specifier.
@@ -48,6 +51,13 @@ clock-indices: If the identifying number
for the clocks in the node
is not linear from zero, then this allows the mapping of
identifiers into the clock-output-names array.
+ This property not only servers for clocks with multiple
+ clock outputs, but also for clocks with a single clock
+ output whose identifying number is not zero.
+
+ So long as clock-indices is set, clock-cells cannot be
+ set zero.
+
For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
Thanks for the review,
Chunyan
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project