Changes since v3:
- Split patches heading for Media and ARM64 tress
into two seperate series
Changes since v2:
- Stephan: Rebased on v5.16-rc1
- Stephan: Fixed 3/4 commit message title
Changes since v1:
- Rob: Instead of documenting and fixing the use of the clock-lanes
property, remove it, since it is is not programmable and
therefore shouldn't be exposed in the DT.
Robert Foss (2):
media: camss: csiphy: Move to hardcode CSI Clock Lane number
media: dt-bindings: media: camss: Remove clock-lane property
.../bindings/media/qcom,msm8916-camss.yaml | 10 ---------
.../bindings/media/qcom,msm8996-camss.yaml | 20 ------------------
.../bindings/media/qcom,sdm660-camss.yaml | 20 ------------------
.../bindings/media/qcom,sdm845-camss.yaml | 17 ---------------
.../qcom/camss/camss-csiphy-2ph-1-0.c | 19 +++++++++++++++--
.../qcom/camss/camss-csiphy-3ph-1-0.c | 17 ++++++++++++++-
.../media/platform/qcom/camss/camss-csiphy.c | 21 +------------------
.../media/platform/qcom/camss/camss-csiphy.h | 7 +++++++
8 files changed, 41 insertions(+), 90 deletions(-)
--
2.32.0
The clock-lanes property is not programmable by the hardware,
and as such it should not be exposed in the dt-binding.
Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/media/qcom,msm8916-camss.yaml | 10 ----------
.../bindings/media/qcom,msm8996-camss.yaml | 20 -------------------
.../bindings/media/qcom,sdm660-camss.yaml | 20 -------------------
.../bindings/media/qcom,sdm845-camss.yaml | 17 ----------------
4 files changed, 67 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
index 304908072d72..12ec3e1ea869 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8916-camss.yaml
@@ -83,10 +83,6 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 1
-
data-lanes:
description:
An array of physical data lanes indexes.
@@ -99,7 +95,6 @@ properties:
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@1:
@@ -114,16 +109,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 1
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
index 38be41e932f0..6aeb3d6d02d5 100644
--- a/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,msm8996-camss.yaml
@@ -105,10 +105,6 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
description:
An array of physical data lanes indexes.
@@ -121,7 +117,6 @@ properties:
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@1:
@@ -136,16 +131,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@2:
@@ -160,16 +150,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@3:
@@ -184,16 +169,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
index 841a1aafdd13..338ab28d5f3b 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm660-camss.yaml
@@ -111,16 +111,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@1:
@@ -135,16 +130,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@2:
@@ -159,16 +149,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@3:
@@ -183,16 +168,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
reg:
diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
index 9ca5dfa7f226..9404d6b9db54 100644
--- a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -105,15 +105,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- maxItems: 1
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@1:
@@ -128,16 +124,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- items:
- - const: 7
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@2:
@@ -152,15 +143,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- maxItems: 1
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
port@3:
@@ -175,15 +162,11 @@ properties:
unevaluatedProperties: false
properties:
- clock-lanes:
- maxItems: 1
-
data-lanes:
minItems: 1
maxItems: 4
required:
- - clock-lanes
- data-lanes
reg:
--
2.32.0
QCOM ISPs do not support having a programmable CSI Clock Lane number.
In order to accurately reflect this, the different CSIPHY HW versions
need to have their own register layer for computing lane masks.
Signed-off-by: Robert Foss <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
---
.../qcom/camss/camss-csiphy-2ph-1-0.c | 19 +++++++++++++++--
.../qcom/camss/camss-csiphy-3ph-1-0.c | 17 ++++++++++++++-
.../media/platform/qcom/camss/camss-csiphy.c | 21 +------------------
.../media/platform/qcom/camss/camss-csiphy.h | 7 +++++++
4 files changed, 41 insertions(+), 23 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c
index 30b454c369ab..cd4a8c369234 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c
@@ -16,6 +16,7 @@
#define CAMSS_CSI_PHY_LNn_CFG2(n) (0x004 + 0x40 * (n))
#define CAMSS_CSI_PHY_LNn_CFG3(n) (0x008 + 0x40 * (n))
+#define CAMSS_CSI_PHY_LN_CLK 1
#define CAMSS_CSI_PHY_GLBL_RESET 0x140
#define CAMSS_CSI_PHY_GLBL_PWR_CFG 0x144
#define CAMSS_CSI_PHY_GLBL_IRQ_CMD 0x164
@@ -26,6 +27,19 @@
#define CAMSS_CSI_PHY_GLBL_T_INIT_CFG0 0x1ec
#define CAMSS_CSI_PHY_T_WAKEUP_CFG0 0x1f4
+static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
+{
+ u8 lane_mask;
+ int i;
+
+ lane_mask = 1 << CAMSS_CSI_PHY_LN_CLK;
+
+ for (i = 0; i < lane_cfg->num_data; i++)
+ lane_mask |= 1 << lane_cfg->data[i].pos;
+
+ return lane_mask;
+}
+
static void csiphy_hw_version_read(struct csiphy_device *csiphy,
struct device *dev)
{
@@ -105,7 +119,7 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
for (i = 0; i <= c->num_data; i++) {
if (i == c->num_data)
- l = c->clk.pos;
+ l = CAMSS_CSI_PHY_LN_CLK;
else
l = c->data[i].pos;
@@ -129,7 +143,7 @@ static void csiphy_lanes_disable(struct csiphy_device *csiphy,
for (i = 0; i <= c->num_data; i++) {
if (i == c->num_data)
- l = c->clk.pos;
+ l = CAMSS_CSI_PHY_LN_CLK;
else
l = c->data[i].pos;
@@ -167,6 +181,7 @@ static irqreturn_t csiphy_isr(int irq, void *dev)
}
const struct csiphy_hw_ops csiphy_ops_2ph_1_0 = {
+ .get_lane_mask = csiphy_get_lane_mask,
.hw_version_read = csiphy_hw_version_read,
.reset = csiphy_reset,
.lanes_enable = csiphy_lanes_enable,
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index e318c822ab04..cde6b3a10b9e 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -43,6 +43,7 @@
#define CSIPHY_3PH_LNn_CSI_LANE_CTRL15_SWI_SOT_SYMBOL 0xb8
#define CSIPHY_3PH_CMN_CSI_COMMON_CTRLn(n) (0x800 + 0x4 * (n))
+#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)
#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_COMMON_PWRDN_B BIT(0)
#define CSIPHY_3PH_CMN_CSI_COMMON_CTRL6_SHOW_REV_ID BIT(1)
#define CSIPHY_3PH_CMN_CSI_COMMON_STATUSn(n) (0x8b0 + 0x4 * (n))
@@ -320,6 +321,19 @@ static void csiphy_gen2_config_lanes(struct csiphy_device *csiphy,
}
}
+static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
+{
+ u8 lane_mask;
+ int i;
+
+ lane_mask = CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE;
+
+ for (i = 0; i < lane_cfg->num_data; i++)
+ lane_mask |= 1 << lane_cfg->data[i].pos;
+
+ return lane_mask;
+}
+
static void csiphy_lanes_enable(struct csiphy_device *csiphy,
struct csiphy_config *cfg,
s64 link_freq, u8 lane_mask)
@@ -331,7 +345,7 @@ static void csiphy_lanes_enable(struct csiphy_device *csiphy,
settle_cnt = csiphy_settle_cnt_calc(link_freq, csiphy->timer_clk_rate);
- val = BIT(c->clk.pos);
+ val = CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE;
for (i = 0; i < c->num_data; i++)
val |= BIT(c->data[i].pos * 2);
@@ -397,6 +411,7 @@ static void csiphy_lanes_disable(struct csiphy_device *csiphy,
}
const struct csiphy_hw_ops csiphy_ops_3ph_1_0 = {
+ .get_lane_mask = csiphy_get_lane_mask,
.hw_version_read = csiphy_hw_version_read,
.reset = csiphy_reset,
.lanes_enable = csiphy_lanes_enable,
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.c b/drivers/media/platform/qcom/camss/camss-csiphy.c
index 24eec16197e7..ac7e96e6b7cd 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.c
@@ -229,25 +229,6 @@ static int csiphy_set_power(struct v4l2_subdev *sd, int on)
return 0;
}
-/*
- * csiphy_get_lane_mask - Calculate CSI2 lane mask configuration parameter
- * @lane_cfg - CSI2 lane configuration
- *
- * Return lane mask
- */
-static u8 csiphy_get_lane_mask(struct csiphy_lanes_cfg *lane_cfg)
-{
- u8 lane_mask;
- int i;
-
- lane_mask = 1 << lane_cfg->clk.pos;
-
- for (i = 0; i < lane_cfg->num_data; i++)
- lane_mask |= 1 << lane_cfg->data[i].pos;
-
- return lane_mask;
-}
-
/*
* csiphy_stream_on - Enable streaming on CSIPHY module
* @csiphy: CSIPHY device
@@ -261,7 +242,7 @@ static int csiphy_stream_on(struct csiphy_device *csiphy)
{
struct csiphy_config *cfg = &csiphy->cfg;
s64 link_freq;
- u8 lane_mask = csiphy_get_lane_mask(&cfg->csi2->lane_cfg);
+ u8 lane_mask = csiphy->ops->get_lane_mask(&cfg->csi2->lane_cfg);
u8 bpp = csiphy_get_bpp(csiphy->formats, csiphy->nformats,
csiphy->fmt[MSM_CSIPHY_PAD_SINK].code);
u8 num_lanes = csiphy->cfg.csi2->lane_cfg.num_data;
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy.h b/drivers/media/platform/qcom/camss/camss-csiphy.h
index d71b8bc6ec00..1c14947f92d3 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy.h
+++ b/drivers/media/platform/qcom/camss/camss-csiphy.h
@@ -45,6 +45,13 @@ struct csiphy_config {
struct csiphy_device;
struct csiphy_hw_ops {
+ /*
+ * csiphy_get_lane_mask - Calculate CSI2 lane mask configuration parameter
+ * @lane_cfg - CSI2 lane configuration
+ *
+ * Return lane mask
+ */
+ u8 (*get_lane_mask)(struct csiphy_lanes_cfg *lane_cfg);
void (*hw_version_read)(struct csiphy_device *csiphy,
struct device *dev);
void (*reset)(struct csiphy_device *csiphy);
--
2.32.0
Hi Robert,
I posted a PR for Bryan's 'CAMSS: Add SM8250 support' series, but your patch series
clashes with his. Can you rebase this series on top of Bryan's work?
You can use this branch I made for the PR if you want:
https://git.linuxtv.org/hverkuil/media_tree.git/log/?h=for-v5.17j
Thanks!
Hans
On 06/12/2021 16:18, Robert Foss wrote:
> Changes since v3:
> - Split patches heading for Media and ARM64 tress
> into two seperate series
>
> Changes since v2:
> - Stephan: Rebased on v5.16-rc1
> - Stephan: Fixed 3/4 commit message title
>
> Changes since v1:
> - Rob: Instead of documenting and fixing the use of the clock-lanes
> property, remove it, since it is is not programmable and
> therefore shouldn't be exposed in the DT.
>
> Robert Foss (2):
> media: camss: csiphy: Move to hardcode CSI Clock Lane number
> media: dt-bindings: media: camss: Remove clock-lane property
>
> .../bindings/media/qcom,msm8916-camss.yaml | 10 ---------
> .../bindings/media/qcom,msm8996-camss.yaml | 20 ------------------
> .../bindings/media/qcom,sdm660-camss.yaml | 20 ------------------
> .../bindings/media/qcom,sdm845-camss.yaml | 17 ---------------
> .../qcom/camss/camss-csiphy-2ph-1-0.c | 19 +++++++++++++++--
> .../qcom/camss/camss-csiphy-3ph-1-0.c | 17 ++++++++++++++-
> .../media/platform/qcom/camss/camss-csiphy.c | 21 +------------------
> .../media/platform/qcom/camss/camss-csiphy.h | 7 +++++++
> 8 files changed, 41 insertions(+), 90 deletions(-)
>
Bjorn: The CAMSS changes related to this series have just been applied
to the media tree, so I think this series is ready to be applied now.
https://lore.kernel.org/all/[email protected]/