This patch allows LVDS PHYs to be configured through
the generic functions and through a custom structure
added to the generic union.
The parameters added here are based on common LVDS PHY
implementation practices. The set of parameters
should cover all potential users.
Cc: Kishon Vijay Abraham I <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: NXP Linux Team <[email protected]>
Signed-off-by: Liu Ying <[email protected]>
---
v3->v4:
* No change.
v2->v3:
* No change.
v1->v2:
* No change.
include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/phy/phy.h | 4 ++++
2 files changed, 52 insertions(+)
create mode 100644 include/linux/phy/phy-lvds.h
diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
new file mode 100644
index 00000000..1b5b9d6
--- /dev/null
+++ b/include/linux/phy/phy-lvds.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2020 NXP
+ */
+
+#ifndef __PHY_LVDS_H_
+#define __PHY_LVDS_H_
+
+/**
+ * struct phy_configure_opts_lvds - LVDS configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * LVDS phy.
+ */
+struct phy_configure_opts_lvds {
+ /**
+ * @bits_per_lane_and_dclk_cycle:
+ *
+ * Number of bits per data lane and differential clock cycle.
+ */
+ unsigned int bits_per_lane_and_dclk_cycle;
+
+ /**
+ * @differential_clk_rate:
+ *
+ * Clock rate, in Hertz, of the LVDS differential clock.
+ */
+ unsigned long differential_clk_rate;
+
+ /**
+ * @lanes:
+ *
+ * Number of active, consecutive, data lanes, starting from
+ * lane 0, used for the transmissions.
+ */
+ unsigned int lanes;
+
+ /**
+ * @is_slave:
+ *
+ * Boolean, true if the phy is a slave which works together
+ * with a master phy to support dual link transmission,
+ * otherwise a regular phy or a master phy.
+ */
+ bool is_slave;
+};
+
+#endif /* __PHY_LVDS_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e435bdb..d450b44 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-lvds.h>
#include <linux/phy/phy-mipi-dphy.h>
struct phy;
@@ -51,10 +52,13 @@ enum phy_mode {
* the MIPI_DPHY phy mode.
* @dp: Configuration set applicable for phys supporting
* the DisplayPort protocol.
+ * @lvds: Configuration set applicable for phys supporting
+ * the LVDS phy mode.
*/
union phy_configure_opts {
struct phy_configure_opts_mipi_dphy mipi_dphy;
struct phy_configure_opts_dp dp;
+ struct phy_configure_opts_lvds lvds;
};
/**
--
2.7.4
Hey Liu,
Thanks for submitting this series.
This patch looks good to me.
Reviewed-by: Robert Foss <[email protected]>
On Thu, 18 Feb 2021 at 04:56, Liu Ying <[email protected]> wrote:
>
> This patch allows LVDS PHYs to be configured through
> the generic functions and through a custom structure
> added to the generic union.
>
> The parameters added here are based on common LVDS PHY
> implementation practices. The set of parameters
> should cover all potential users.
>
> Cc: Kishon Vijay Abraham I <[email protected]>
> Cc: Vinod Koul <[email protected]>
> Cc: NXP Linux Team <[email protected]>
> Signed-off-by: Liu Ying <[email protected]>
> ---
> v3->v4:
> * No change.
>
> v2->v3:
> * No change.
>
> v1->v2:
> * No change.
>
> include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/phy/phy.h | 4 ++++
> 2 files changed, 52 insertions(+)
> create mode 100644 include/linux/phy/phy-lvds.h
>
> diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
> new file mode 100644
> index 00000000..1b5b9d6
> --- /dev/null
> +++ b/include/linux/phy/phy-lvds.h
> @@ -0,0 +1,48 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +#ifndef __PHY_LVDS_H_
> +#define __PHY_LVDS_H_
> +
> +/**
> + * struct phy_configure_opts_lvds - LVDS configuration set
> + *
> + * This structure is used to represent the configuration state of a
> + * LVDS phy.
> + */
> +struct phy_configure_opts_lvds {
> + /**
> + * @bits_per_lane_and_dclk_cycle:
> + *
> + * Number of bits per data lane and differential clock cycle.
> + */
> + unsigned int bits_per_lane_and_dclk_cycle;
> +
> + /**
> + * @differential_clk_rate:
> + *
> + * Clock rate, in Hertz, of the LVDS differential clock.
> + */
> + unsigned long differential_clk_rate;
> +
> + /**
> + * @lanes:
> + *
> + * Number of active, consecutive, data lanes, starting from
> + * lane 0, used for the transmissions.
> + */
> + unsigned int lanes;
> +
> + /**
> + * @is_slave:
> + *
> + * Boolean, true if the phy is a slave which works together
> + * with a master phy to support dual link transmission,
> + * otherwise a regular phy or a master phy.
> + */
> + bool is_slave;
> +};
> +
> +#endif /* __PHY_LVDS_H_ */
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index e435bdb..d450b44 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -17,6 +17,7 @@
> #include <linux/regulator/consumer.h>
>
> #include <linux/phy/phy-dp.h>
> +#include <linux/phy/phy-lvds.h>
> #include <linux/phy/phy-mipi-dphy.h>
>
> struct phy;
> @@ -51,10 +52,13 @@ enum phy_mode {
> * the MIPI_DPHY phy mode.
> * @dp: Configuration set applicable for phys supporting
> * the DisplayPort protocol.
> + * @lvds: Configuration set applicable for phys supporting
> + * the LVDS phy mode.
> */
> union phy_configure_opts {
> struct phy_configure_opts_mipi_dphy mipi_dphy;
> struct phy_configure_opts_dp dp;
> + struct phy_configure_opts_lvds lvds;
> };
>
> /**
> --
> 2.7.4
>