Not all devices quantify their performance points in terms of frequency.
Devices like interconnects quantify their performance points in terms of
bandwidth. We need a way to represent these bandwidth levels in OPP. So,
add support for parsing bandwidth OPPs from DT.
Signed-off-by: Saravana Kannan <[email protected]>
---
drivers/opp/of.c | 34 ++++++++++++++++++++++++++++++++--
drivers/opp/opp.h | 4 +++-
2 files changed, 35 insertions(+), 3 deletions(-)
diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index c10c782d15aa..54fa70ed2adc 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -552,6 +552,35 @@ void dev_pm_opp_of_remove_table(struct device *dev)
}
EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
+static int _read_opp_key(struct dev_pm_opp *new_opp, struct device_node *np)
+{
+ int ret;
+ u64 rate;
+ u32 bw;
+
+ ret = of_property_read_u64(np, "opp-hz", &rate);
+ if (!ret) {
+ /*
+ * Rate is defined as an unsigned long in clk API, and so
+ * casting explicitly to its type. Must be fixed once rate is 64
+ * bit guaranteed in clk API.
+ */
+ new_opp->rate = (unsigned long)rate;
+ return 0;
+ }
+
+ ret = of_property_read_u32(np, "opp-peak-KBps", &bw);
+ if (ret)
+ return ret;
+ new_opp->rate = (unsigned long) &bw;
+
+ ret = of_property_read_u32(np, "opp-avg-KBps", &bw);
+ if (!ret)
+ new_opp->avg_bw = (unsigned long) &bw;
+
+ return 0;
+}
+
/**
* _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
* @opp_table: OPP table
@@ -589,11 +618,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
if (!new_opp)
return ERR_PTR(-ENOMEM);
- ret = of_property_read_u64(np, "opp-hz", &rate);
+ ret = _read_opp_key(new_opp, np);
if (ret < 0) {
/* "opp-hz" is optional for devices like power domains. */
if (!opp_table->is_genpd) {
- dev_err(dev, "%s: opp-hz not found\n", __func__);
+ dev_err(dev, "%s: opp-hz or opp-peak-bw not found\n",
+ __func__);
goto free_opp;
}
diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
index 569b3525aa67..ead2cdafe957 100644
--- a/drivers/opp/opp.h
+++ b/drivers/opp/opp.h
@@ -59,7 +59,8 @@ extern struct list_head opp_tables;
* @turbo: true if turbo (boost) OPP
* @suspend: true if suspend OPP
* @pstate: Device's power domain's performance state.
- * @rate: Frequency in hertz
+ * @rate: Frequency in hertz OR Peak bandwidth in kilobytes per second
+ * @avg_bw: Average bandwidth in kilobytes per second
* @level: Performance level
* @supplies: Power supplies voltage/current values
* @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
@@ -81,6 +82,7 @@ struct dev_pm_opp {
bool suspend;
unsigned int pstate;
unsigned long rate;
+ unsigned long avg_bw;
unsigned int level;
struct dev_pm_opp_supply *supplies;
--
2.22.0.410.gd8fdbe21b5-goog
Hey Saravana,
On 7/3/19 6:40 AM, Saravana Kannan wrote:
> Not all devices quantify their performance points in terms of frequency.
> Devices like interconnects quantify their performance points in terms of
> bandwidth. We need a way to represent these bandwidth levels in OPP. So,
> add support for parsing bandwidth OPPs from DT.
>
> Signed-off-by: Saravana Kannan <[email protected]>
> ---
> drivers/opp/of.c | 34 ++++++++++++++++++++++++++++++++--
> drivers/opp/opp.h | 4 +++-
> 2 files changed, 35 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> index c10c782d15aa..54fa70ed2adc 100644
> --- a/drivers/opp/of.c
> +++ b/drivers/opp/of.c
> @@ -552,6 +552,35 @@ void dev_pm_opp_of_remove_table(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
>
> +static int _read_opp_key(struct dev_pm_opp *new_opp, struct device_node *np)
> +{
> + int ret;
> + u64 rate;
> + u32 bw;
> +
> + ret = of_property_read_u64(np, "opp-hz", &rate);
> + if (!ret) {
> + /*
> + * Rate is defined as an unsigned long in clk API, and so
> + * casting explicitly to its type. Must be fixed once rate is 64
> + * bit guaranteed in clk API.
> + */
> + new_opp->rate = (unsigned long)rate
now that the rate gets set here, please remove the rate assignment in
_opp_add_static_v2
> + return 0;
> + }
> +
> + ret = of_property_read_u32(np, "opp-peak-KBps", &bw);
> + if (ret)
> + return ret;
> + new_opp->rate = (unsigned long) &bw;
should be bw instead
> +
> + ret = of_property_read_u32(np, "opp-avg-KBps", &bw);
> + if (!ret)
> + new_opp->avg_bw = (unsigned long) &bw;
ditto
> +
> + return 0;
> +}
> +
> /**
> * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
> * @opp_table: OPP table
> @@ -589,11 +618,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
> if (!new_opp)
> return ERR_PTR(-ENOMEM);
>
> - ret = of_property_read_u64(np, "opp-hz", &rate);
> + ret = _read_opp_key(new_opp, np);
> if (ret < 0) {
> /* "opp-hz" is optional for devices like power domains. */
> if (!opp_table->is_genpd) {
> - dev_err(dev, "%s: opp-hz not found\n", __func__);
> + dev_err(dev, "%s: opp-hz or opp-peak-bw not found\n",
> + __func__);
please remove the else part where rate value will be reset.
> goto free_opp;
> }
>
> diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
> index 569b3525aa67..ead2cdafe957 100644
> --- a/drivers/opp/opp.h
> +++ b/drivers/opp/opp.h
> @@ -59,7 +59,8 @@ extern struct list_head opp_tables;
> * @turbo: true if turbo (boost) OPP
> * @suspend: true if suspend OPP
> * @pstate: Device's power domain's performance state.
> - * @rate: Frequency in hertz
> + * @rate: Frequency in hertz OR Peak bandwidth in kilobytes per second
> + * @avg_bw: Average bandwidth in kilobytes per second
> * @level: Performance level
> * @supplies: Power supplies voltage/current values
> * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
> @@ -81,6 +82,7 @@ struct dev_pm_opp {
> bool suspend;
> unsigned int pstate;
> unsigned long rate;
> + unsigned long avg_bw;
> unsigned int level;
>
> struct dev_pm_opp_supply *supplies;
>
--
Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc, is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On Tue, Jul 16, 2019 at 10:33 AM Sibi Sankar <[email protected]> wrote:
>
> Hey Saravana,
>
> On 7/3/19 6:40 AM, Saravana Kannan wrote:
> > Not all devices quantify their performance points in terms of frequency.
> > Devices like interconnects quantify their performance points in terms of
> > bandwidth. We need a way to represent these bandwidth levels in OPP. So,
> > add support for parsing bandwidth OPPs from DT.
> >
> > Signed-off-by: Saravana Kannan <[email protected]>
> > ---
> > drivers/opp/of.c | 34 ++++++++++++++++++++++++++++++++--
> > drivers/opp/opp.h | 4 +++-
> > 2 files changed, 35 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> > index c10c782d15aa..54fa70ed2adc 100644
> > --- a/drivers/opp/of.c
> > +++ b/drivers/opp/of.c
> > @@ -552,6 +552,35 @@ void dev_pm_opp_of_remove_table(struct device *dev)
> > }
> > EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
> >
> > +static int _read_opp_key(struct dev_pm_opp *new_opp, struct device_node *np)
> > +{
> > + int ret;
> > + u64 rate;
> > + u32 bw;
> > +
> > + ret = of_property_read_u64(np, "opp-hz", &rate);
> > + if (!ret) {
> > + /*
> > + * Rate is defined as an unsigned long in clk API, and so
> > + * casting explicitly to its type. Must be fixed once rate is 64
> > + * bit guaranteed in clk API.
> > + */
> > + new_opp->rate = (unsigned long)rate
> now that the rate gets set here, please remove the rate assignment in
> _opp_add_static_v2
>
> > + return 0;
> > + }
> > +
> > + ret = of_property_read_u32(np, "opp-peak-KBps", &bw);
> > + if (ret)
> > + return ret;
> > + new_opp->rate = (unsigned long) &bw;
>
> should be bw instead
Good catch. Thanks!
>
> > +
> > + ret = of_property_read_u32(np, "opp-avg-KBps", &bw);
> > + if (!ret)
> > + new_opp->avg_bw = (unsigned long) &bw;
>
> ditto
>
> > +
> > + return 0;
> > +}
> > +
> > /**
> > * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
> > * @opp_table: OPP table
> > @@ -589,11 +618,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
> > if (!new_opp)
> > return ERR_PTR(-ENOMEM);
> >
> > - ret = of_property_read_u64(np, "opp-hz", &rate);
> > + ret = _read_opp_key(new_opp, np);
> > if (ret < 0) {
> > /* "opp-hz" is optional for devices like power domains. */
> > if (!opp_table->is_genpd) {
> > - dev_err(dev, "%s: opp-hz not found\n", __func__);
> > + dev_err(dev, "%s: opp-hz or opp-peak-bw not found\n",
> > + __func__);
>
> please remove the else part where rate value will be reset.
Ah! I flipped the meaning of the "if" check in my head. Thanks!
-Saravana
On Wed, Jul 3, 2019 at 6:40 AM Saravana Kannan <[email protected]> wrote:
>
> Not all devices quantify their performance points in terms of frequency.
> Devices like interconnects quantify their performance points in terms of
> bandwidth. We need a way to represent these bandwidth levels in OPP. So,
> add support for parsing bandwidth OPPs from DT.
>
> Signed-off-by: Saravana Kannan <[email protected]>
> ---
> drivers/opp/of.c | 34 ++++++++++++++++++++++++++++++++--
> drivers/opp/opp.h | 4 +++-
> 2 files changed, 35 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> index c10c782d15aa..54fa70ed2adc 100644
> --- a/drivers/opp/of.c
> +++ b/drivers/opp/of.c
> @@ -552,6 +552,35 @@ void dev_pm_opp_of_remove_table(struct device *dev)
> }
> EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
>
> +static int _read_opp_key(struct dev_pm_opp *new_opp, struct device_node *np)
> +{
> + int ret;
> + u64 rate;
> + u32 bw;
> +
> + ret = of_property_read_u64(np, "opp-hz", &rate);
> + if (!ret) {
> + /*
> + * Rate is defined as an unsigned long in clk API, and so
> + * casting explicitly to its type. Must be fixed once rate is 64
> + * bit guaranteed in clk API.
> + */
> + new_opp->rate = (unsigned long)rate;
> + return 0;
> + }
> +
> + ret = of_property_read_u32(np, "opp-peak-KBps", &bw);
> + if (ret)
> + return ret;
> + new_opp->rate = (unsigned long) &bw;
> +
> + ret = of_property_read_u32(np, "opp-avg-KBps", &bw);
> + if (!ret)
> + new_opp->avg_bw = (unsigned long) &bw;
> +
> + return 0;
> +}
> +
> /**
> * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
> * @opp_table: OPP table
> @@ -589,11 +618,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
> if (!new_opp)
> return ERR_PTR(-ENOMEM);
>
> - ret = of_property_read_u64(np, "opp-hz", &rate);
> + ret = _read_opp_key(new_opp, np);
> if (ret < 0) {
> /* "opp-hz" is optional for devices like power domains. */
> if (!opp_table->is_genpd) {
> - dev_err(dev, "%s: opp-hz not found\n", __func__);
> + dev_err(dev, "%s: opp-hz or opp-peak-bw not found\n",
> + __func__);
> goto free_opp;
> }
>
> diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
> index 569b3525aa67..ead2cdafe957 100644
> --- a/drivers/opp/opp.h
> +++ b/drivers/opp/opp.h
> @@ -59,7 +59,8 @@ extern struct list_head opp_tables;
> * @turbo: true if turbo (boost) OPP
> * @suspend: true if suspend OPP
> * @pstate: Device's power domain's performance state.
> - * @rate: Frequency in hertz
> + * @rate: Frequency in hertz OR Peak bandwidth in kilobytes per second
rate is most often used for clk rates. Let us not overload this just
to save one struct member. IMO, you should introduce a peak_bw member
and then have an error check if the DT provides both rate and peak_bw
during parsing.
> + * @avg_bw: Average bandwidth in kilobytes per second
> * @level: Performance level
> * @supplies: Power supplies voltage/current values
> * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
> @@ -81,6 +82,7 @@ struct dev_pm_opp {
> bool suspend;
> unsigned int pstate;
> unsigned long rate;
> + unsigned long avg_bw;
> unsigned int level;
>
> struct dev_pm_opp_supply *supplies;
> --
> 2.22.0.410.gd8fdbe21b5-goog
>
On Tue, Jul 30, 2019 at 3:57 AM Amit Kucheria <[email protected]> wrote:
>
> On Wed, Jul 3, 2019 at 6:40 AM Saravana Kannan <[email protected]> wrote:
> >
> > Not all devices quantify their performance points in terms of frequency.
> > Devices like interconnects quantify their performance points in terms of
> > bandwidth. We need a way to represent these bandwidth levels in OPP. So,
> > add support for parsing bandwidth OPPs from DT.
> >
> > Signed-off-by: Saravana Kannan <[email protected]>
> > ---
> > drivers/opp/of.c | 34 ++++++++++++++++++++++++++++++++--
> > drivers/opp/opp.h | 4 +++-
> > 2 files changed, 35 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/opp/of.c b/drivers/opp/of.c
> > index c10c782d15aa..54fa70ed2adc 100644
> > --- a/drivers/opp/of.c
> > +++ b/drivers/opp/of.c
> > @@ -552,6 +552,35 @@ void dev_pm_opp_of_remove_table(struct device *dev)
> > }
> > EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
> >
> > +static int _read_opp_key(struct dev_pm_opp *new_opp, struct device_node *np)
> > +{
> > + int ret;
> > + u64 rate;
> > + u32 bw;
> > +
> > + ret = of_property_read_u64(np, "opp-hz", &rate);
> > + if (!ret) {
> > + /*
> > + * Rate is defined as an unsigned long in clk API, and so
> > + * casting explicitly to its type. Must be fixed once rate is 64
> > + * bit guaranteed in clk API.
> > + */
> > + new_opp->rate = (unsigned long)rate;
> > + return 0;
> > + }
> > +
> > + ret = of_property_read_u32(np, "opp-peak-KBps", &bw);
> > + if (ret)
> > + return ret;
> > + new_opp->rate = (unsigned long) &bw;
> > +
> > + ret = of_property_read_u32(np, "opp-avg-KBps", &bw);
> > + if (!ret)
> > + new_opp->avg_bw = (unsigned long) &bw;
> > +
> > + return 0;
> > +}
> > +
> > /**
> > * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
> > * @opp_table: OPP table
> > @@ -589,11 +618,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
> > if (!new_opp)
> > return ERR_PTR(-ENOMEM);
> >
> > - ret = of_property_read_u64(np, "opp-hz", &rate);
> > + ret = _read_opp_key(new_opp, np);
> > if (ret < 0) {
> > /* "opp-hz" is optional for devices like power domains. */
> > if (!opp_table->is_genpd) {
> > - dev_err(dev, "%s: opp-hz not found\n", __func__);
> > + dev_err(dev, "%s: opp-hz or opp-peak-bw not found\n",
> > + __func__);
> > goto free_opp;
> > }
> >
> > diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
> > index 569b3525aa67..ead2cdafe957 100644
> > --- a/drivers/opp/opp.h
> > +++ b/drivers/opp/opp.h
> > @@ -59,7 +59,8 @@ extern struct list_head opp_tables;
> > * @turbo: true if turbo (boost) OPP
> > * @suspend: true if suspend OPP
> > * @pstate: Device's power domain's performance state.
> > - * @rate: Frequency in hertz
> > + * @rate: Frequency in hertz OR Peak bandwidth in kilobytes per second
>
> rate is most often used for clk rates. Let us not overload this just
> to save one struct member. IMO, you should introduce a peak_bw member
> and then have an error check if the DT provides both rate and peak_bw
> during parsing.
This is not about saving space. It avoids having to rewrite a lot of
helper functions. If you want, I can rename this to "key" but I'm not
going to create a different field.
-Saravana