Since the series that fixes console probe delay based on stdout-path[1] got
pulled into driver-core-next, I made these patches on top of them.
Even if stdout-path isn't set in DT, this patch should take console
probe times back to how they were before the deferred_probe_timeout
clean up series[2].
Fabio/Ahmad/Sascha,
Can you give this a shot please?
[1] - https://lore.kernel.org/lkml/[email protected]/
[2] - https://lore.kernel.org/lkml/[email protected]/
Thanks,
Saravana
cc: Rob Herring <[email protected]>
cc: sascha hauer <[email protected]>
cc: peng fan <[email protected]>
cc: kevin hilman <[email protected]>
cc: ulf hansson <[email protected]>
cc: len brown <[email protected]>
cc: pavel machek <[email protected]>
cc: joerg roedel <[email protected]>
cc: will deacon <[email protected]>
cc: andrew lunn <[email protected]>
cc: heiner kallweit <[email protected]>
cc: russell king <[email protected]>
cc: "david s. miller" <[email protected]>
cc: eric dumazet <[email protected]>
cc: jakub kicinski <[email protected]>
cc: paolo abeni <[email protected]>
cc: linus walleij <[email protected]>
cc: hideaki yoshifuji <[email protected]>
cc: david ahern <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Cc: [email protected]
Saravana Kannan (2):
driver core: Add probe_no_timeout flag for drivers
serial: Set probe_no_timeout for all DT based drivers
drivers/base/base.h | 1 +
drivers/base/core.c | 7 +++++++
drivers/base/dd.c | 3 +++
drivers/tty/ehv_bytechan.c | 1 +
drivers/tty/goldfish.c | 1 +
drivers/tty/hvc/hvc_opal.c | 1 +
drivers/tty/serial/8250/8250_acorn.c | 1 -
drivers/tty/serial/8250/8250_aspeed_vuart.c | 1 +
drivers/tty/serial/8250/8250_bcm2835aux.c | 1 +
drivers/tty/serial/8250/8250_bcm7271.c | 1 +
drivers/tty/serial/8250/8250_dw.c | 1 +
drivers/tty/serial/8250/8250_em.c | 1 +
drivers/tty/serial/8250/8250_ingenic.c | 1 +
drivers/tty/serial/8250/8250_lpc18xx.c | 1 +
drivers/tty/serial/8250/8250_mtk.c | 1 +
drivers/tty/serial/8250/8250_of.c | 1 +
drivers/tty/serial/8250/8250_omap.c | 1 +
drivers/tty/serial/8250/8250_pxa.c | 1 +
drivers/tty/serial/8250/8250_tegra.c | 1 +
drivers/tty/serial/8250/8250_uniphier.c | 1 +
drivers/tty/serial/altera_jtaguart.c | 1 +
drivers/tty/serial/altera_uart.c | 1 +
drivers/tty/serial/amba-pl011.c | 1 +
drivers/tty/serial/apbuart.c | 1 +
drivers/tty/serial/ar933x_uart.c | 1 +
drivers/tty/serial/arc_uart.c | 1 +
drivers/tty/serial/atmel_serial.c | 1 +
drivers/tty/serial/bcm63xx_uart.c | 1 +
drivers/tty/serial/clps711x.c | 1 +
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1 +
drivers/tty/serial/digicolor-usart.c | 1 +
drivers/tty/serial/fsl_linflexuart.c | 1 +
drivers/tty/serial/fsl_lpuart.c | 1 +
drivers/tty/serial/imx.c | 1 +
drivers/tty/serial/lantiq.c | 1 +
drivers/tty/serial/liteuart.c | 1 +
drivers/tty/serial/lpc32xx_hs.c | 1 +
drivers/tty/serial/max310x.c | 1 +
drivers/tty/serial/meson_uart.c | 1 +
drivers/tty/serial/milbeaut_usio.c | 1 +
drivers/tty/serial/mpc52xx_uart.c | 1 +
drivers/tty/serial/mps2-uart.c | 1 +
drivers/tty/serial/msm_serial.c | 1 +
drivers/tty/serial/mvebu-uart.c | 1 +
drivers/tty/serial/mxs-auart.c | 1 +
drivers/tty/serial/omap-serial.c | 1 +
drivers/tty/serial/owl-uart.c | 1 +
drivers/tty/serial/pic32_uart.c | 1 +
drivers/tty/serial/pmac_zilog.c | 1 +
drivers/tty/serial/pxa.c | 1 +
drivers/tty/serial/qcom_geni_serial.c | 1 +
drivers/tty/serial/rda-uart.c | 1 +
drivers/tty/serial/samsung_tty.c | 1 +
drivers/tty/serial/sc16is7xx.c | 1 +
drivers/tty/serial/serial-tegra.c | 1 +
drivers/tty/serial/sh-sci.c | 1 +
drivers/tty/serial/sifive.c | 1 +
drivers/tty/serial/sprd_serial.c | 1 +
drivers/tty/serial/st-asc.c | 1 +
drivers/tty/serial/stm32-usart.c | 1 +
drivers/tty/serial/sunhv.c | 1 +
drivers/tty/serial/sunplus-uart.c | 1 +
drivers/tty/serial/sunsab.c | 1 +
drivers/tty/serial/sunsu.c | 1 +
drivers/tty/serial/sunzilog.c | 1 +
drivers/tty/serial/tegra-tcu.c | 1 +
drivers/tty/serial/uartlite.c | 1 +
drivers/tty/serial/ucc_uart.c | 1 +
drivers/tty/serial/vt8500_serial.c | 1 +
drivers/tty/serial/xilinx_uartps.c | 1 +
include/linux/device.h | 7 +++++++
include/linux/device/driver.h | 11 +++++++++++
72 files changed, 95 insertions(+), 1 deletion(-)
--
2.37.0.rc0.161.g10f37bed90-goog
This flag only needs to be set for drivers of devices that meet all the
following conditions:
- Need to probe successfully before userspace init in started
- Have optional suppliers
- Can't wait for deferred_probe_timeout to expire
fw_devlink=on uses this info, as needed, to ignore dependencies on supplier
devices that have not been added or supplier devices that don't have any
drivers. It's still up to the driver to decide which of the missing
suppliers are optional or not.
Fixes: 71066545b48e ("driver core: Set fw_devlink.strict=1 by default")
Reported-by: Sascha Hauer <[email protected]>
Reported-by: Peng Fan <[email protected]>
Reported-by: Fabio Estevam <[email protected]>
Reported-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Saravana Kannan <[email protected]>
---
drivers/base/base.h | 1 +
drivers/base/core.c | 7 +++++++
drivers/base/dd.c | 3 +++
include/linux/device.h | 7 +++++++
include/linux/device/driver.h | 11 +++++++++++
5 files changed, 29 insertions(+)
diff --git a/drivers/base/base.h b/drivers/base/base.h
index b3a43a164dcd..149822d2086f 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -193,6 +193,7 @@ extern void device_links_no_driver(struct device *dev);
extern bool device_links_busy(struct device *dev);
extern void device_links_unbind_consumers(struct device *dev);
extern void fw_devlink_drivers_done(void);
+extern void fw_devlink_probe_no_timeout(void);
/* device pm support */
void device_pm_move_to_tail(struct device *dev);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index ccdd5b4295de..8e18904a1584 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -54,6 +54,7 @@ static unsigned int defer_sync_state_count = 1;
static DEFINE_MUTEX(fwnode_link_lock);
static bool fw_devlink_is_permissive(void);
static bool fw_devlink_drv_reg_done;
+static bool fw_devlink_no_timeout;
static bool fw_devlink_best_effort;
/**
@@ -969,6 +970,7 @@ static void device_links_missing_supplier(struct device *dev)
static bool dev_is_best_effort(struct device *dev)
{
return (fw_devlink_best_effort && dev->can_match) ||
+ (fw_devlink_no_timeout && dev->probe_no_timeout) ||
(dev->fwnode && (dev->fwnode->flags & FWNODE_FLAG_BEST_EFFORT));
}
@@ -1688,6 +1690,11 @@ void fw_devlink_drivers_done(void)
device_links_write_unlock();
}
+void fw_devlink_probe_no_timeout(void)
+{
+ fw_devlink_no_timeout = true;
+}
+
/**
* wait_for_init_devices_probe - Try to probe any device needed for init
*
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index e600dd2afc35..9b0ef2b6a058 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -324,6 +324,8 @@ static int deferred_probe_initcall(void)
if (!IS_ENABLED(CONFIG_MODULES))
fw_devlink_drivers_done();
+ else
+ fw_devlink_probe_no_timeout();
/*
* Trigger deferred probe again, this time we won't defer anything
@@ -734,6 +736,7 @@ static int __driver_probe_device(struct device_driver *drv, struct device *dev)
return -EBUSY;
dev->can_match = true;
+ dev->probe_no_timeout = drv->probe_no_timeout;
pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
drv->bus->name, __func__, dev_name(dev), drv->name);
diff --git a/include/linux/device.h b/include/linux/device.h
index 424b55df0272..e6246b6cf6cf 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -536,6 +536,12 @@ struct device_physical_location {
* @can_match: The device has matched with a driver at least once or it is in
* a bus (like AMBA) which can't check for matching drivers until
* other devices probe successfully.
+ * @probe_no_timeout: Set by driver core to indicate that this device's probe
+ * can't wait till driver_probe_timeout expires. This information
+ * is used by fw_devlink=on to avoid deferring the probe of this
+ * device to wait on supplier devices that haven't been added or
+ * probed successfully.
+ * See also: probe_no_timeout in struct driver.
* @dma_coherent: this particular device is dma coherent, even if the
* architecture supports non-coherent devices.
* @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the
@@ -642,6 +648,7 @@ struct device {
bool of_node_reused:1;
bool state_synced:1;
bool can_match:1;
+ bool probe_no_timeout:1;
#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE) || \
defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \
defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
diff --git a/include/linux/device/driver.h b/include/linux/device/driver.h
index 7acaabde5396..2ce60e511504 100644
--- a/include/linux/device/driver.h
+++ b/include/linux/device/driver.h
@@ -55,6 +55,15 @@ enum probe_type {
* @owner: The module owner.
* @mod_name: Used for built-in modules.
* @suppress_bind_attrs: Disables bind/unbind via sysfs.
+ * @probe_no_timeout: Set to true by drivers that bind to devices that meet all
+ * these conditions:
+ * - Need to probe successfully before userspace init in started
+ * - Have optional suppliers
+ * - Can't wait for deferred_probe_timeout to expire
+ * fw_devlink=on uses this info, as needed, to ignore dependencies
+ * on supplier devices that have not been added or supplier devices
+ * that don't have any drivers. It's still up to the driver to
+ * decide which of the missing suppliers are optional or not.
* @probe_type: Type of the probe (synchronous or asynchronous) to use.
* @of_match_table: The open firmware table.
* @acpi_match_table: The ACPI match table.
@@ -101,6 +110,8 @@ struct device_driver {
const char *mod_name; /* used for built-in modules */
bool suppress_bind_attrs; /* disables bind/unbind via sysfs */
+ bool probe_no_timeout;
+
enum probe_type probe_type;
const struct of_device_id *of_match_table;
--
2.37.0.rc0.161.g10f37bed90-goog
With commit 71066545b48e ("driver core: Set fw_devlink.strict=1 by
default") the probing of TTY consoles could get delayed if they have
optional suppliers that are listed in DT, but those suppliers don't
probe by the time kernel boot finishes. The console devices will probe
eventually after driver_probe_timeout expires.
However, since consoles are often used for debugging kernel issues, it
does not make sense to delay their probe. So, set the newly added
probe_no_timeout flag for all serial drivers that at DT based. This way,
fw_devlink will know not to delay the probing of the consoles past
kernel boot.
Fixes: 71066545b48e ("driver core: Set fw_devlink.strict=1 by default")
Reported-by: Sascha Hauer <[email protected]>
Reported-by: Peng Fan <[email protected]>
Reported-by: Fabio Estevam <[email protected]>
Reported-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Saravana Kannan <[email protected]>
---
drivers/tty/ehv_bytechan.c | 1 +
drivers/tty/goldfish.c | 1 +
drivers/tty/hvc/hvc_opal.c | 1 +
drivers/tty/serial/8250/8250_acorn.c | 1 -
drivers/tty/serial/8250/8250_aspeed_vuart.c | 1 +
drivers/tty/serial/8250/8250_bcm2835aux.c | 1 +
drivers/tty/serial/8250/8250_bcm7271.c | 1 +
drivers/tty/serial/8250/8250_dw.c | 1 +
drivers/tty/serial/8250/8250_em.c | 1 +
drivers/tty/serial/8250/8250_ingenic.c | 1 +
drivers/tty/serial/8250/8250_lpc18xx.c | 1 +
drivers/tty/serial/8250/8250_mtk.c | 1 +
drivers/tty/serial/8250/8250_of.c | 1 +
drivers/tty/serial/8250/8250_omap.c | 1 +
drivers/tty/serial/8250/8250_pxa.c | 1 +
drivers/tty/serial/8250/8250_tegra.c | 1 +
drivers/tty/serial/8250/8250_uniphier.c | 1 +
drivers/tty/serial/altera_jtaguart.c | 1 +
drivers/tty/serial/altera_uart.c | 1 +
drivers/tty/serial/amba-pl011.c | 1 +
drivers/tty/serial/apbuart.c | 1 +
drivers/tty/serial/ar933x_uart.c | 1 +
drivers/tty/serial/arc_uart.c | 1 +
drivers/tty/serial/atmel_serial.c | 1 +
drivers/tty/serial/bcm63xx_uart.c | 1 +
drivers/tty/serial/clps711x.c | 1 +
drivers/tty/serial/cpm_uart/cpm_uart_core.c | 1 +
drivers/tty/serial/digicolor-usart.c | 1 +
drivers/tty/serial/fsl_linflexuart.c | 1 +
drivers/tty/serial/fsl_lpuart.c | 1 +
drivers/tty/serial/imx.c | 1 +
drivers/tty/serial/lantiq.c | 1 +
drivers/tty/serial/liteuart.c | 1 +
drivers/tty/serial/lpc32xx_hs.c | 1 +
drivers/tty/serial/max310x.c | 1 +
drivers/tty/serial/meson_uart.c | 1 +
drivers/tty/serial/milbeaut_usio.c | 1 +
drivers/tty/serial/mpc52xx_uart.c | 1 +
drivers/tty/serial/mps2-uart.c | 1 +
drivers/tty/serial/msm_serial.c | 1 +
drivers/tty/serial/mvebu-uart.c | 1 +
drivers/tty/serial/mxs-auart.c | 1 +
drivers/tty/serial/omap-serial.c | 1 +
drivers/tty/serial/owl-uart.c | 1 +
drivers/tty/serial/pic32_uart.c | 1 +
drivers/tty/serial/pmac_zilog.c | 1 +
drivers/tty/serial/pxa.c | 1 +
drivers/tty/serial/qcom_geni_serial.c | 1 +
drivers/tty/serial/rda-uart.c | 1 +
drivers/tty/serial/samsung_tty.c | 1 +
drivers/tty/serial/sc16is7xx.c | 1 +
drivers/tty/serial/serial-tegra.c | 1 +
drivers/tty/serial/sh-sci.c | 1 +
drivers/tty/serial/sifive.c | 1 +
drivers/tty/serial/sprd_serial.c | 1 +
drivers/tty/serial/st-asc.c | 1 +
drivers/tty/serial/stm32-usart.c | 1 +
drivers/tty/serial/sunhv.c | 1 +
drivers/tty/serial/sunplus-uart.c | 1 +
drivers/tty/serial/sunsab.c | 1 +
drivers/tty/serial/sunsu.c | 1 +
drivers/tty/serial/sunzilog.c | 1 +
drivers/tty/serial/tegra-tcu.c | 1 +
drivers/tty/serial/uartlite.c | 1 +
drivers/tty/serial/ucc_uart.c | 1 +
drivers/tty/serial/vt8500_serial.c | 1 +
drivers/tty/serial/xilinx_uartps.c | 1 +
67 files changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c
index 19d32cb6af84..6de710da99be 100644
--- a/drivers/tty/ehv_bytechan.c
+++ b/drivers/tty/ehv_bytechan.c
@@ -739,6 +739,7 @@ static struct platform_driver ehv_bc_tty_driver = {
.driver = {
.name = "ehv-bc",
.of_match_table = ehv_bc_tty_of_ids,
+ .probe_no_timeout = true,
.suppress_bind_attrs = true,
},
.probe = ehv_bc_tty_probe,
diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c
index c7968aecd870..f9760598c836 100644
--- a/drivers/tty/goldfish.c
+++ b/drivers/tty/goldfish.c
@@ -474,6 +474,7 @@ static struct platform_driver goldfish_tty_platform_driver = {
.driver = {
.name = "goldfish_tty",
.of_match_table = goldfish_tty_of_match,
+ .probe_no_timeout = true,
}
};
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 794c7b18aa06..08202c2f8ead 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -253,6 +253,7 @@ static struct platform_driver hvc_opal_driver = {
.driver = {
.name = hvc_opal_name,
.of_match_table = hvc_opal_match,
+ .probe_no_timeout = true,
}
};
diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
index 758c4aa203ab..5a6f2f67de4f 100644
--- a/drivers/tty/serial/8250/8250_acorn.c
+++ b/drivers/tty/serial/8250/8250_acorn.c
@@ -114,7 +114,6 @@ static const struct ecard_id serial_cids[] = {
static struct ecard_driver serial_card_driver = {
.probe = serial_card_probe,
.remove = serial_card_remove,
- .id_table = serial_cids,
.drv = {
.name = "8250_acorn",
},
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 9d2a7856784f..ca4b89ae13a4 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -592,6 +592,7 @@ static struct platform_driver aspeed_vuart_driver = {
.driver = {
.name = "aspeed-vuart",
.of_match_table = aspeed_vuart_table,
+ .probe_no_timeout = true,
},
.probe = aspeed_vuart_probe,
.remove = aspeed_vuart_remove,
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index 2a1226a78a0c..6c00ba7a123a 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -223,6 +223,7 @@ static struct platform_driver bcm2835aux_serial_driver = {
.name = "bcm2835-aux-uart",
.of_match_table = bcm2835aux_serial_match,
.acpi_match_table = bcm2835aux_serial_acpi_match,
+ .probe_no_timeout = true,
},
.probe = bcm2835aux_serial_probe,
.remove = bcm2835aux_serial_remove,
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 9b878d023dac..7898dcbff07e 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -1193,6 +1193,7 @@ static struct platform_driver brcmuart_platform_driver = {
.name = "bcm7271-uart",
.pm = &brcmuart_dev_pm_ops,
.of_match_table = brcmuart_dt_ids,
+ .probe_no_timeout = true,
},
.probe = brcmuart_probe,
.remove = brcmuart_remove,
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index f57bbd32ef11..616f5197378a 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -795,6 +795,7 @@ static struct platform_driver dw8250_platform_driver = {
.pm = &dw8250_pm_ops,
.of_match_table = dw8250_of_match,
.acpi_match_table = dw8250_acpi_match,
+ .probe_no_timeout = true,
},
.probe = dw8250_probe,
.remove = dw8250_remove,
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index f8e99995eee9..0dc9a2e45cf2 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -151,6 +151,7 @@ static struct platform_driver serial8250_em_platform_driver = {
.driver = {
.name = "serial8250-em",
.of_match_table = serial8250_em_dt_ids,
+ .probe_no_timeout = true,
},
.probe = serial8250_em_probe,
.remove = serial8250_em_remove,
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index cff91aa03f29..dc595a4a49a0 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -341,6 +341,7 @@ static struct platform_driver ingenic_uart_platform_driver = {
.driver = {
.name = "ingenic-uart",
.of_match_table = of_match,
+ .probe_no_timeout = true,
},
.probe = ingenic_uart_probe,
.remove = ingenic_uart_remove,
diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index 570e25d6f37e..d9c91c57331c 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -215,6 +215,7 @@ static struct platform_driver lpc18xx_serial_driver = {
.driver = {
.name = "lpc18xx-uart",
.of_match_table = lpc18xx_serial_match,
+ .probe_no_timeout = true,
},
};
module_platform_driver(lpc18xx_serial_driver);
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 54051ec7b499..85e8a19c0929 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -671,6 +671,7 @@ static struct platform_driver mtk8250_platform_driver = {
.name = "mt6577-uart",
.pm = &mtk8250_pm_ops,
.of_match_table = mtk8250_of_match,
+ .probe_no_timeout = true,
},
.probe = mtk8250_probe,
.remove = mtk8250_remove,
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 5a699a1aa79c..580abd22d3c6 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -343,6 +343,7 @@ static struct platform_driver of_platform_serial_driver = {
.driver = {
.name = "of_serial",
.of_match_table = of_platform_serial_table,
+ .probe_no_timeout = true,
.pm = &of_serial_pm_ops,
},
.probe = of_platform_serial_probe,
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index ac8bfa042391..8d83597174b4 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -1694,6 +1694,7 @@ static struct platform_driver omap8250_platform_driver = {
.name = "omap8250",
.pm = &omap8250_dev_pm_ops,
.of_match_table = omap8250_dt_ids,
+ .probe_no_timeout = true,
},
.probe = omap8250_probe,
.remove = omap8250_remove,
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index 795e55142d4c..9f7bb52fabbe 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -165,6 +165,7 @@ static struct platform_driver serial_pxa_driver = {
.name = "pxa2xx-uart",
.pm = &serial_pxa_pm_ops,
.of_match_table = serial_pxa_dt_ids,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/8250/8250_tegra.c b/drivers/tty/serial/8250/8250_tegra.c
index e7cddeec9d8e..45630f7d9e98 100644
--- a/drivers/tty/serial/8250/8250_tegra.c
+++ b/drivers/tty/serial/8250/8250_tegra.c
@@ -187,6 +187,7 @@ static struct platform_driver tegra_uart_driver = {
.pm = &tegra_uart_pm_ops,
.of_match_table = tegra_uart_of_match,
.acpi_match_table = ACPI_PTR(tegra_uart_acpi_match),
+ .probe_no_timeout = true,
},
.probe = tegra_uart_probe,
.remove = tegra_uart_remove,
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index a2978abab0db..7fdf45c4513d 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -297,6 +297,7 @@ static struct platform_driver uniphier_uart_platform_driver = {
.driver = {
.name = "uniphier-uart",
.of_match_table = uniphier_uart_match,
+ .probe_no_timeout = true,
.pm = &uniphier_uart_pm_ops,
},
};
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index cb791c5149a3..548934284691 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -493,6 +493,7 @@ static struct platform_driver altera_jtaguart_platform_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(altera_jtaguart_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 8b749ed557c6..25c834f900eb 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -645,6 +645,7 @@ static struct platform_driver altera_uart_platform_driver = {
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(altera_uart_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 97ef41cb2721..eae866568f14 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2912,6 +2912,7 @@ static struct platform_driver arm_sbsa_uart_platform_driver = {
.pm = &pl011_dev_pm_ops,
.of_match_table = of_match_ptr(sbsa_uart_of_match),
.acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
+ .probe_no_timeout = true,
.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
},
};
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 9ef82d870ff2..72c1b7884a3b 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -583,6 +583,7 @@ static struct platform_driver grlib_apbuart_of_driver = {
.driver = {
.name = "grlib-apbuart",
.of_match_table = apbuart_match,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
index 6269dbf93546..f0013be1a7c7 100644
--- a/drivers/tty/serial/ar933x_uart.c
+++ b/drivers/tty/serial/ar933x_uart.c
@@ -842,6 +842,7 @@ static struct platform_driver ar933x_uart_platform_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(ar933x_uart_of_ids),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index 2a09e92ef9ed..7998c285fc6c 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -650,6 +650,7 @@ static struct platform_driver arc_platform_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = arc_uart_dt_ids,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index dd1c7e4bd1c9..ff74ea97b305 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -3020,6 +3020,7 @@ static struct platform_driver atmel_serial_driver = {
.driver = {
.name = "atmel_usart_serial",
.of_match_table = of_match_ptr(atmel_serial_dt_ids),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 53b43174aa40..d91c49c50ac6 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -890,6 +890,7 @@ static struct platform_driver bcm_uart_platform_driver = {
.driver = {
.name = "bcm63xx_uart",
.of_match_table = bcm63xx_of_match,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index b9b66ad31a08..b81710802937 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -528,6 +528,7 @@ static struct platform_driver clps711x_uart_platform = {
.driver = {
.name = "clps711x-uart",
.of_match_table = of_match_ptr(clps711x_uart_dt_ids),
+ .probe_no_timeout = true,
},
.probe = uart_clps711x_probe,
.remove = uart_clps711x_remove,
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index db07d6a5d764..ff269637bc28 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1470,6 +1470,7 @@ static struct platform_driver cpm_uart_driver = {
.driver = {
.name = "cpm_uart",
.of_match_table = cpm_uart_match,
+ .probe_no_timeout = true,
},
.probe = cpm_uart_probe,
.remove = cpm_uart_remove,
diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c
index af951e6a2ef4..b2148b48d195 100644
--- a/drivers/tty/serial/digicolor-usart.c
+++ b/drivers/tty/serial/digicolor-usart.c
@@ -524,6 +524,7 @@ static struct platform_driver digicolor_uart_platform = {
.driver = {
.name = "digicolor-usart",
.of_match_table = of_match_ptr(digicolor_uart_dt_ids),
+ .probe_no_timeout = true,
},
.probe = digicolor_uart_probe,
.remove = digicolor_uart_remove,
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index 98bb0c315e13..08514238af36 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -889,6 +889,7 @@ static struct platform_driver linflex_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = linflex_dt_ids,
+ .probe_no_timeout = true,
.pm = &linflex_pm_ops,
},
};
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 0d6e62f6bb07..64e969278c72 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2857,6 +2857,7 @@ static struct platform_driver lpuart_driver = {
.driver = {
.name = "fsl-lpuart",
.of_match_table = lpuart_dt_ids,
+ .probe_no_timeout = true,
.pm = &lpuart_pm_ops,
},
};
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 30edb35a6a15..deb2539d0fbc 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2604,6 +2604,7 @@ static struct platform_driver imx_uart_platform_driver = {
.driver = {
.name = "imx-uart",
.of_match_table = imx_uart_dt_ids,
+ .probe_no_timeout = true,
.pm = &imx_uart_pm_ops,
},
};
diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index a3120c3347dd..279ee1ba6ae1 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -942,6 +942,7 @@ static struct platform_driver lqasc_driver = {
.driver = {
.name = DRVNAME,
.of_match_table = ltq_asc_match,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index 328b50521f14..e92cf2a1b4cc 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -324,6 +324,7 @@ static struct platform_driver liteuart_platform_driver = {
.driver = {
.name = "liteuart",
.of_match_table = liteuart_of_match,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 93140cac1ca1..bb655bd7f678 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -727,6 +727,7 @@ static struct platform_driver serial_hs_lpc32xx_driver = {
.driver = {
.name = MODNAME,
.of_match_table = serial_hs_lpc32xx_dt_ids,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index a0b6ea52d133..09e3cee4e0ce 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -1504,6 +1504,7 @@ static struct spi_driver max310x_spi_driver = {
.driver = {
.name = MAX310X_NAME,
.of_match_table = max310x_dt_ids,
+ .probe_no_timeout = true,
.pm = &max310x_pm_ops,
},
.probe = max310x_spi_probe,
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 4869c0059c98..f0104d85484e 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -826,6 +826,7 @@ static struct platform_driver meson_uart_platform_driver = {
.driver = {
.name = "meson_uart",
.of_match_table = meson_uart_dt_match,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c
index 347088bb380e..e175e6e0e7c7 100644
--- a/drivers/tty/serial/milbeaut_usio.c
+++ b/drivers/tty/serial/milbeaut_usio.c
@@ -576,6 +576,7 @@ static struct platform_driver mlb_usio_driver = {
.driver = {
.name = USIO_NAME,
.of_match_table = mlb_usio_dt_ids,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index e50f069b5ebb..da9c60baf0ed 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -1885,6 +1885,7 @@ static struct platform_driver mpc52xx_uart_of_driver = {
.driver = {
.name = "mpc52xx-psc-uart",
.of_match_table = mpc52xx_uart_of_match,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/mps2-uart.c b/drivers/tty/serial/mps2-uart.c
index 5e9429dcc51f..4cb82ebe0ec7 100644
--- a/drivers/tty/serial/mps2-uart.c
+++ b/drivers/tty/serial/mps2-uart.c
@@ -634,6 +634,7 @@ static struct platform_driver mps2_serial_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = of_match_ptr(mps2_match),
+ .probe_no_timeout = true,
.suppress_bind_attrs = true,
},
};
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index e676ec761f18..989a5cc8612c 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -1890,6 +1890,7 @@ static struct platform_driver msm_platform_driver = {
.name = "msm_serial",
.pm = &msm_serial_dev_pm_ops,
.of_match_table = msm_match_table,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index 0429c2a54290..b5b49773fcce 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -1049,6 +1049,7 @@ static struct platform_driver mvebu_uart_platform_driver = {
.driver = {
.name = "mvebu-uart",
.of_match_table = of_match_ptr(mvebu_uart_of_match),
+ .probe_no_timeout = true,
.suppress_bind_attrs = true,
#if defined(CONFIG_PM)
.pm = &mvebu_uart_pm_ops,
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 1944daf8593a..8bd871b5f263 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1725,6 +1725,7 @@ static struct platform_driver mxs_auart_driver = {
.driver = {
.name = "mxs-auart",
.of_match_table = mxs_auart_dt_ids,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 46f4d4cacb6e..2e61d9cbbecb 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1834,6 +1834,7 @@ static struct platform_driver serial_omap_driver = {
.name = OMAP_SERIAL_DRIVER_NAME,
.pm = &serial_omap_dev_pm_ops,
.of_match_table = of_match_ptr(omap_serial_of_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/owl-uart.c b/drivers/tty/serial/owl-uart.c
index 44d20e5a7dd3..858223abab9d 100644
--- a/drivers/tty/serial/owl-uart.c
+++ b/drivers/tty/serial/owl-uart.c
@@ -766,6 +766,7 @@ static struct platform_driver owl_uart_platform_driver = {
.driver = {
.name = "owl-uart",
.of_match_table = owl_uart_dt_matches,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index b399aac530fe..3f08ac2f38b4 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -986,6 +986,7 @@ static struct platform_driver pic32_uart_platform_driver = {
.driver = {
.name = PIC32_DEV_NAME,
.of_match_table = of_match_ptr(pic32_serial_dt_ids),
+ .probe_no_timeout = true,
.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32),
},
};
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 3133446e806c..552efe9eef7b 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -1790,6 +1790,7 @@ static struct macio_driver pmz_driver = {
.name = "pmac_zilog",
.owner = THIS_MODULE,
.of_match_table = pmz_match,
+ .probe_no_timeout = true,
},
.probe = pmz_attach,
.remove = pmz_detach,
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index e80ba8e10407..b0b91f69b24c 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -910,6 +910,7 @@ static struct platform_driver serial_pxa_driver = {
#endif
.suppress_bind_attrs = true,
.of_match_table = serial_pxa_dt_ids,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 4733a233bd0c..c47cfd4a5ea5 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1541,6 +1541,7 @@ static struct platform_driver qcom_geni_serial_platform_driver = {
.driver = {
.name = "qcom_geni_serial",
.of_match_table = qcom_geni_serial_match_table,
+ .probe_no_timeout = true,
.pm = &qcom_geni_serial_pm_ops,
},
};
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index f556b4955f59..9e7927de0972 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -797,6 +797,7 @@ static struct platform_driver rda_uart_platform_driver = {
.driver = {
.name = "rda-uart",
.of_match_table = rda_uart_dt_matches,
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index d5ca904def34..e3d77bc2420f 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -2939,6 +2939,7 @@ static struct platform_driver samsung_serial_driver = {
.name = "samsung-uart",
.pm = SERIAL_SAMSUNG_PM_OPS,
.of_match_table = of_match_ptr(s3c24xx_uart_dt_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 8472bf70477c..dfc455850908 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1652,6 +1652,7 @@ static struct spi_driver sc16is7xx_spi_uart_driver = {
.driver = {
.name = SC16IS7XX_NAME,
.of_match_table = sc16is7xx_dt_ids,
+ .probe_no_timeout = true,
},
.probe = sc16is7xx_spi_probe,
.remove = sc16is7xx_spi_remove,
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index d942ab152f5a..240166a36569 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1653,6 +1653,7 @@ static struct platform_driver tegra_uart_platform_driver = {
.driver = {
.name = "serial-tegra",
.of_match_table = tegra_uart_of_match,
+ .probe_no_timeout = true,
.pm = &tegra_uart_pm_ops,
},
};
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 0075a1420005..ee90562c7e8d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3396,6 +3396,7 @@ static struct platform_driver sci_driver = {
.name = "sh-sci",
.pm = &sci_dev_pm_ops,
.of_match_table = of_match_ptr(of_sci_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index c0869b080cc3..a9f3a4562205 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -1066,6 +1066,7 @@ static struct platform_driver sifive_serial_platform_driver = {
.driver = {
.name = SIFIVE_SERIAL_NAME,
.of_match_table = of_match_ptr(sifive_serial_of_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 4329b9c9cbf0..6c01e647bc4d 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -1278,6 +1278,7 @@ static struct platform_driver sprd_platform_driver = {
.driver = {
.name = "sprd_serial",
.of_match_table = of_match_ptr(serial_ids),
+ .probe_no_timeout = true,
.pm = &sprd_pm_ops,
},
};
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 1b0da603ab54..a01c10522bb6 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -973,6 +973,7 @@ static struct platform_driver asc_serial_driver = {
.name = DRIVER_NAME,
.pm = &asc_serial_pm_ops,
.of_match_table = of_match_ptr(asc_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index b7b44f4050d4..5aa01cd6f24f 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -2019,6 +2019,7 @@ static struct platform_driver stm32_serial_driver = {
.name = DRIVER_NAME,
.pm = &stm32_serial_pm_ops,
.of_match_table = of_match_ptr(stm32_match),
+ .probe_no_timeout = true,
},
};
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index eafada8fb6fa..05bf49af8328 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -630,6 +630,7 @@ static struct platform_driver hv_driver = {
.driver = {
.name = "hv",
.of_match_table = hv_match,
+ .probe_no_timeout = true,
},
.probe = hv_probe,
.remove = hv_remove,
diff --git a/drivers/tty/serial/sunplus-uart.c b/drivers/tty/serial/sunplus-uart.c
index 60c73662f955..b5b09aedab9c 100644
--- a/drivers/tty/serial/sunplus-uart.c
+++ b/drivers/tty/serial/sunplus-uart.c
@@ -709,6 +709,7 @@ static struct platform_driver sunplus_uart_platform_driver = {
.driver = {
.name = "sunplus_uart",
.of_match_table = sp_uart_of_match,
+ .probe_no_timeout = true,
.pm = &sunplus_uart_pm_ops,
}
};
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 6ea52293d9f3..3d2eea131a67 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -1103,6 +1103,7 @@ static struct platform_driver sab_driver = {
.driver = {
.name = "sab",
.of_match_table = sab_match,
+ .probe_no_timeout = true,
},
.probe = sab_probe,
.remove = sab_remove,
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index fff50b5b82eb..598691174e08 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1566,6 +1566,7 @@ static struct platform_driver su_driver = {
.driver = {
.name = "su",
.of_match_table = su_match,
+ .probe_no_timeout = true,
},
.probe = su_probe,
.remove = su_remove,
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index c14275d83b0b..15dc30f493d9 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -1541,6 +1541,7 @@ static struct platform_driver zs_driver = {
.driver = {
.name = "zs",
.of_match_table = zs_match,
+ .probe_no_timeout = true,
},
.probe = zs_probe,
.remove = zs_remove,
diff --git a/drivers/tty/serial/tegra-tcu.c b/drivers/tty/serial/tegra-tcu.c
index 4877c54c613d..aa0ba869e590 100644
--- a/drivers/tty/serial/tegra-tcu.c
+++ b/drivers/tty/serial/tegra-tcu.c
@@ -292,6 +292,7 @@ static struct platform_driver tegra_tcu_driver = {
.driver = {
.name = "tegra-tcu",
.of_match_table = tegra_tcu_match,
+ .probe_no_timeout = true,
},
.probe = tegra_tcu_probe,
.remove = tegra_tcu_remove,
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 880e2afbb97b..a7f600e57a25 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -919,6 +919,7 @@ static struct platform_driver ulite_platform_driver = {
.driver = {
.name = "uartlite",
.of_match_table = of_match_ptr(ulite_of_match),
+ .probe_no_timeout = true,
.pm = &ulite_pm_ops,
},
};
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 6000853973c1..a2e637876db0 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1500,6 +1500,7 @@ static struct platform_driver ucc_uart_of_driver = {
.driver = {
.name = "ucc_uart",
.of_match_table = ucc_uart_match,
+ .probe_no_timeout = true,
},
.probe = ucc_uart_probe,
.remove = ucc_uart_remove,
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 6f08136ce78a..074b4e8b61b6 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -722,6 +722,7 @@ static struct platform_driver vt8500_platform_driver = {
.driver = {
.name = "vt8500_serial",
.of_match_table = wmt_dt_ids,
+ .probe_no_timeout = true,
.suppress_bind_attrs = true,
},
};
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 9e01fe6c0ab8..7e941c7e819e 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1656,6 +1656,7 @@ static struct platform_driver cdns_uart_platform_driver = {
.driver = {
.name = CDNS_UART_NAME,
.of_match_table = cdns_uart_of_match,
+ .probe_no_timeout = true,
.pm = &cdns_uart_dev_pm_ops,
.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART),
},
--
2.37.0.rc0.161.g10f37bed90-goog
Hi Saravana,
On Mon, Jun 27, 2022 at 11:03 PM Saravana Kannan <[email protected]> wrote:
>
> Since the series that fixes console probe delay based on stdout-path[1] got
> pulled into driver-core-next, I made these patches on top of them.
>
> Even if stdout-path isn't set in DT, this patch should take console
> probe times back to how they were before the deferred_probe_timeout
> clean up series[2].
>
> Fabio/Ahmad/Sascha,
>
> Can you give this a shot please?
This series works fine for me (with and without stdout-path), thanks:
Tested-by: Fabio Estevam <[email protected]>
On Mon, Jun 27, 2022 at 07:01:01PM -0700, Saravana Kannan wrote:
> Since the series that fixes console probe delay based on stdout-path[1] got
> pulled into driver-core-next, I made these patches on top of them.
>
> Even if stdout-path isn't set in DT, this patch should take console
> probe times back to how they were before the deferred_probe_timeout
> clean up series[2].
Are you sure it's only limited to the serial drivers?
(just asking, I don't know myself the answer)
--
With Best Regards,
Andy Shevchenko
On 2022-06-28 at 04:01:03 +0200, Saravana Kannan <[email protected]> wrote:
> diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
> index 758c4aa203ab..5a6f2f67de4f 100644
> --- a/drivers/tty/serial/8250/8250_acorn.c
> +++ b/drivers/tty/serial/8250/8250_acorn.c
> @@ -114,7 +114,6 @@ static const struct ecard_id serial_cids[] = {
> static struct ecard_driver serial_card_driver = {
> .probe = serial_card_probe,
> .remove = serial_card_remove,
> - .id_table = serial_cids,
Is this change intentional? All other drivers are only changed to set
.probe_no_time and I don't see anything mentioned in the commit message
re. this driver's change.
On Tue, Jun 28, 2022 at 7:00 AM Tobias Klauser <[email protected]> wrote:
>
> On 2022-06-28 at 04:01:03 +0200, Saravana Kannan <[email protected]> wrote:
> > diff --git a/drivers/tty/serial/8250/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c
> > index 758c4aa203ab..5a6f2f67de4f 100644
> > --- a/drivers/tty/serial/8250/8250_acorn.c
> > +++ b/drivers/tty/serial/8250/8250_acorn.c
> > @@ -114,7 +114,6 @@ static const struct ecard_id serial_cids[] = {
> > static struct ecard_driver serial_card_driver = {
> > .probe = serial_card_probe,
> > .remove = serial_card_remove,
> > - .id_table = serial_cids,
>
> Is this change intentional? All other drivers are only changed to set
> .probe_no_time and I don't see anything mentioned in the commit message
> re. this driver's change.
No, that's a mistake. Thanks for catching it! I'll check this patch again.
-Saravana