2018-10-17 22:28:30

by Kun Yi

Subject: [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation

adm127x are hot-swap controllers that allow a circuit board to be removed from
or inserted into a live backplane. This patch adds the device tree
bindings documentation.

Signed-off-by: Kun Yi <[email protected]>
---
.../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt

diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
new file mode 100644
index 000000000000..1ecd03f3da4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt
@@ -0,0 +1,25 @@
+adm1275 properties
+
+Required properties:
+- compatible: Must be one of the supported compatible strings:
+ - "adi,adm1075" for adm1075
+ - "adi,adm1272" for adm1272
+ - "adi,adm1275" for adm1275
+ - "adi,adm1276" for adm1276
+ - "adi,adm1278" for adm1278
+ - "adi,adm1293" for adm1293
+ - "adi,adm1294" for adm1294
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor-micro-ohms
+ Shunt resistor value in micro-Ohm
+
+Example:
+
+adm1272@10 {
+ compatible = "adi,adm1272";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <500>;
+};
--
2.19.1.331.ge82ca0e54c-goog

2018-10-18 19:49:03

by Rob Herring (Arm)

Subject: Re: [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation

On Wed, 17 Oct 2018 15:27:09 -0700, Kun Yi wrote:
> adm127x are hot-swap controllers that allow a circuit board to be removed from
> or inserted into a live backplane. This patch adds the device tree
> bindings documentation.
>
> Signed-off-by: Kun Yi <[email protected]>
> ---
> .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
>

Reviewed-by: Rob Herring <[email protected]>

2018-10-18 20:42:49

by Kun Yi

Subject: Re: [PATCH v3 2/2] dt-bindings: hwmon: Add adm127x documentation

On Thu, Oct 18, 2018 at 12:48 PM Rob Herring <[email protected]> wrote:
>
> On Wed, 17 Oct 2018 15:27:09 -0700, Kun Yi wrote:
> > adm127x are hot-swap controllers that allow a circuit board to be removed from
> > or inserted into a live backplane. This patch adds the device tree
> > bindings documentation.
> >
> > Signed-off-by: Kun Yi <[email protected]>
> > ---
> > .../devicetree/bindings/hwmon/adm1275.txt | 25 +++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/hwmon/adm1275.txt
> >
>
> Reviewed-by: Rob Herring <[email protected]>

Thanks a lot for the Review!


--
Regards,
Kun