2021-09-24 08:08:38

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v14 0/5] Mediatek pinctrl patch on mt8195

This series includes 5 patches:
1.add rsel define.
2.change pull up/down description
3.fix coding style
4.support rsel feature for common ICs
5.add rsel setting on MT8195

Changes in patch v14:
1)add a schema and new property "mediatek, rsel_resistance_in_si_unit"
on patch 2/5.
2)fix kernel-doc style comment on patch 4/5.
3)add review-by on patch 3/5 and 5/5.

Changes in patch v13:
1)change "-EOPNOTSUPP" to "-ENOTSUPP" in patch 4/5.
2)fix description on 2/5.

Changes in patch v12:
1)add "ack-by" on "rsel define" patch.
2)add "change reason" in commit message and write a shema
on patch document patch 2/5.
3)separate eint pm_ops fucntion support patch
4)separate rsel patch, the common parts as patch 4/5 to support
common ICs. The mt8195 specific changes as patch 5/5.
5)add fix coding style patch to fix Camel spelling to avoid checkpatch
warning in a following patch.
6)remove unrelated changes in rsel patch.
7)change ternary ops in resel patch
8)add "rsel_is_unit" property on struct mtk_pinctrl, and itendify
"mediatek,rsel_resistance_in_si_unit" property in probe function.
9)add explanation for "MTK_PULL_RSEL_TYPE" and "MTK_PULL_PU_PD_RSEL_TYPE".
10) fix spell warning in rsel patch.

Changes in patch v11:
1)add pm_ops fucntion support
2)change pull up/down description
3)add resistance value feature support.

Changes in patch v10:
1)fix PARENTHESIS_ALIGNMENT of mtk_pinconf_bias_set_rsel
2)fix LONG_LINE warning in 615 in pinctrl-paris.c.

Changes in patch v9:
1)fix "mtk_pinconf_bias_set_rsel" build warning.

Changes in patch v8:
1)add rsel define patch
2)avoid CamelCase
3)add pinctrl rsel setting patch which is another resistance selection
solution for I2C on MT8195.

Changes in patch v7:
1)add version in patch and fix spelling mistakes.

Changes in patch v6:
1)add "pintcrl: mediatek" as prefix.

Changes in patch v5:
1)document and driver patch are apploed.
2)change '-EOPNOTSUPP' to '-ENOTSUPP'

Changes in patch v4:
1)fix pinctrl-mt8195.yaml warning error.
2)remove pinctrl device node patch which is based on "mt8195.dtsi".

Changes in patch v3:
1)change '^pins' to '-pins$'.
2)change 'state_0_node_a' to 'gpio_pin' which is defined in dts.
3)change 'state_0_node_b' to 'i2c0_pin' which is defined in dts.
4)reorder this series patches. change pinctrl file and binding document
together in one patch.

There are no changes in v1 & v2.

Zhiyong Tao (5):
dt-bindings: pinctrl: mt8195: add rsel define
dt-bindings: pinctrl: mt8195: change pull up/down description
pinctrl: mediatek: fix coding style
pinctrl: mediatek: support rsel feature
pinctrl: mediatek: add rsel setting on MT8195

.../bindings/pinctrl/pinctrl-mt8195.yaml | 86 ++++++-
drivers/pinctrl/mediatek/pinctrl-mt8195.c | 133 ++++++++++
.../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 231 +++++++++++++++---
.../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 46 ++++
drivers/pinctrl/mediatek/pinctrl-paris.c | 68 ++++--
include/dt-bindings/pinctrl/mt65xx.h | 9 +
6 files changed, 519 insertions(+), 54 deletions(-)

--
2.18.0



2021-09-24 08:08:55

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v14 3/5] pinctrl: mediatek: fix coding style

Fix Camel spelling coding style to avoid checkpatch
warning in a following patch.

Signed-off-by: Zhiyong Tao <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 85db2e4377f0..38aec0177d15 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -577,7 +577,7 @@ static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int
mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DRV)

ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
- unsigned int gpio, char *buf, unsigned int bufLen)
+ unsigned int gpio, char *buf, unsigned int buf_len)
{
int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1;
const struct mtk_pin_desc *desc;
@@ -610,7 +610,7 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
} else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
pullen = 0;
}
- len += scnprintf(buf + len, bufLen - len,
+ len += scnprintf(buf + len, buf_len - len,
"%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
gpio,
pinmux,
@@ -624,10 +624,10 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
pullup);

if (r1 != -1) {
- len += scnprintf(buf + len, bufLen - len, " (%1d %1d)\n",
+ len += scnprintf(buf + len, buf_len - len, " (%1d %1d)\n",
r1, r0);
} else {
- len += scnprintf(buf + len, bufLen - len, "\n");
+ len += scnprintf(buf + len, buf_len - len, "\n");
}

return len;
--
2.25.1

2021-09-24 08:09:30

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v14 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description

For supporting SI units in "bias-pull-down" & "bias-pull-up",
change pull up/down description
and add "mediatek,rsel_resistance_in_si_unit" description.

Signed-off-by: Zhiyong Tao <[email protected]>
---
.../bindings/pinctrl/pinctrl-mt8195.yaml | 86 ++++++++++++++++++-
1 file changed, 84 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index 2f12ec59eee5..5f642bef72af 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -49,6 +49,12 @@ properties:
description: The interrupt outputs to sysirq.
maxItems: 1

+ mediatek,rsel_resistance_in_si_unit:
+ type: boolean
+ description: |
+ Identifying i2c pins pull up/down type which is RSEL. It can support
+ RSEL define or si unit value(ohm) to set different resistance.
+
#PIN CONFIGURATION NODES
patternProperties:
'-pins$':
@@ -85,9 +91,85 @@ patternProperties:
2/4/6/8/10/12/14/16mA in mt8195.
enum: [0, 1, 2, 3, 4, 5, 6, 7]

- bias-pull-down: true
+ bias-pull-down:
+ description: |
+ For pull down type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+ define in mt8195.
+ For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
+ to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+ & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+ & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+ define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.
+ oneOf:
+ - enum: [100, 101, 102, 103]
+ - description: mt8195 pull down PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+ - description: mt8195 pull down RSEL type define value.
+ - enum: [75000, 5000]
+ - description: mt8195 pull down RSEL type si unit value(ohm).
+
+ An example of using RSEL define:
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel_resistance_in_si_unit;
+ }
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-down = <75000>;
+ };
+ };

- bias-pull-up: true
+ bias-pull-up:
+ description: |
+ For pull up type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
+ define in mt8195.
+ For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
+ to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+ & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
+ & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
+ define in mt8195. It can also support resistance value(ohm)
+ "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
+ oneOf:
+ - enum: [100, 101, 102, 103]
+ - description: mt8195 pull up PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203, 204, 205, 206, 207]
+ - description: mt8195 pull up RSEL type define value.
+ - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
+ - description: mt8195 pull up RSEL type si unit value(ohm).
+ An example of using RSEL define:
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel_resistance_in_si_unit;
+ }
+ pincontroller {
+ i2c0_pin {
+ pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
+ bias-pull-up = <1000>;
+ };
+ };

bias-disable: true

--
2.25.1

2021-09-24 08:10:23

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v14 4/5] pinctrl: mediatek: support rsel feature

This patch supports rsel(resistance selection) feature for I2C pins.
It provides more resistance selection solution in different ICs.
It provides rsel define and si unit solution by identifying
"mediatek,rsel_resistance_in_si_unit" property in pio dtsi node.

Signed-off-by: Zhiyong Tao <[email protected]>
---
.../pinctrl/mediatek/pinctrl-mtk-common-v2.c | 231 +++++++++++++++---
.../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 46 ++++
drivers/pinctrl/mediatek/pinctrl-paris.c | 60 +++--
3 files changed, 289 insertions(+), 48 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 5b3b048725cc..e84001923aaf 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -661,6 +661,181 @@ static int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
return err;
}

+static int mtk_hw_pin_rsel_lookup(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg, u32 *rsel_val)
+{
+ const struct mtk_pin_rsel *rsel;
+ int check;
+ bool found = false;
+
+ rsel = hw->soc->pin_rsel;
+
+ for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
+ if (desc->number >= rsel[check].s_pin &&
+ desc->number <= rsel[check].e_pin) {
+ if (pullup) {
+ if (rsel[check].up_rsel == arg) {
+ found = true;
+ *rsel_val = rsel[check].rsel_index;
+ break;
+ }
+ } else {
+ if (rsel[check].down_rsel == arg) {
+ found = true;
+ *rsel_val = rsel[check].rsel_index;
+ break;
+ }
+ }
+ }
+ }
+
+ if (!found) {
+ dev_err(hw->dev, "Not support rsel value %d Ohm for pin = %d (%s)\n",
+ arg, desc->number, desc->name);
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+static int mtk_pinconf_bias_set_rsel(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ int err, rsel_val;
+
+ if (hw->rsel_si_unit) {
+ /* find pin rsel_index from pin_rsel array*/
+ err = mtk_hw_pin_rsel_lookup(hw, desc, pullup, arg, &rsel_val);
+ if (err)
+ goto out;
+ } else {
+ if (arg < MTK_PULL_SET_RSEL_000 ||
+ arg > MTK_PULL_SET_RSEL_111) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ rsel_val = arg - MTK_PULL_SET_RSEL_000;
+ }
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_RSEL, rsel_val);
+ if (err)
+ goto out;
+
+ err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, MTK_ENABLE);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ int err = -ENOTSUPP;
+ u32 try_all_type;
+
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+ else
+ try_all_type = MTK_PULL_TYPE_MASK;
+
+ if (try_all_type & MTK_PULL_RSEL_TYPE) {
+ err = mtk_pinconf_bias_set_rsel(hw, desc, pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PU_PD_TYPE) {
+ err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
+ err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc,
+ pullup, arg);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
+ err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
+
+ if (err)
+ dev_err(hw->dev, "Invalid pull argument\n");
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
+
+static int mtk_rsel_get_si_unit(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 rsel_val, u32 *si_unit)
+{
+ const struct mtk_pin_rsel *rsel;
+ int check;
+
+ rsel = hw->soc->pin_rsel;
+
+ for (check = 0; check <= hw->soc->npin_rsel - 1; check++) {
+ if (desc->number >= rsel[check].s_pin &&
+ desc->number <= rsel[check].e_pin) {
+ if (rsel_val == rsel[check].rsel_index) {
+ if (pullup)
+ *si_unit = rsel[check].up_rsel;
+ else
+ *si_unit = rsel[check].down_rsel;
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int mtk_pinconf_bias_get_rsel(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable)
+{
+ int pu, pd, rsel, err;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_RSEL, &rsel);
+ if (err)
+ goto out;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &pu);
+ if (err)
+ goto out;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &pd);
+
+ if (pu == 0 && pd == 0) {
+ *pullup = 0;
+ *enable = MTK_DISABLE;
+ } else if (pu == 1 && pd == 0) {
+ *pullup = 1;
+ if (hw->rsel_si_unit)
+ mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
+ else
+ *enable = rsel + MTK_PULL_SET_RSEL_000;
+ } else if (pu == 0 && pd == 1) {
+ *pullup = 0;
+ if (hw->rsel_si_unit)
+ mtk_rsel_get_si_unit(hw, desc, *pullup, rsel, enable);
+ else
+ *enable = rsel + MTK_PULL_SET_RSEL_000;
+ } else {
+ err = -EINVAL;
+ goto out;
+ }
+
+out:
+ return err;
+}
+
static int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc,
u32 *pullup, u32 *enable)
@@ -742,44 +917,40 @@ static int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
return err;
}

-int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
- const struct mtk_pin_desc *desc,
- u32 pullup, u32 arg)
-{
- int err;
-
- err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
- if (!err)
- goto out;
-
- err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg);
- if (!err)
- goto out;
-
- err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(mtk_pinconf_bias_set_combo);
-
int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc,
u32 *pullup, u32 *enable)
{
- int err;
+ int err = -ENOTSUPP;
+ u32 try_all_type;

- err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
- if (!err)
- goto out;
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+ else
+ try_all_type = MTK_PULL_TYPE_MASK;

- err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable);
- if (!err)
- goto out;
+ if (try_all_type & MTK_PULL_RSEL_TYPE) {
+ err = mtk_pinconf_bias_get_rsel(hw, desc, pullup, enable);
+ if (!err)
+ return err;
+ }

- err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
+ if (try_all_type & MTK_PULL_PU_PD_TYPE) {
+ err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PULLSEL_TYPE) {
+ err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc,
+ pullup, enable);
+ if (!err)
+ return err;
+ }
+
+ if (try_all_type & MTK_PULL_PUPD_R1R0_TYPE)
+ err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);

-out:
return err;
}
EXPORT_SYMBOL_GPL(mtk_pinconf_bias_get_combo);
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index a6f1bdb2083b..23688ca6d04e 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -17,6 +17,22 @@
#define MTK_ENABLE 1
#define MTK_PULLDOWN 0
#define MTK_PULLUP 1
+#define MTK_PULL_PU_PD_TYPE BIT(0)
+#define MTK_PULL_PULLSEL_TYPE BIT(1)
+#define MTK_PULL_PUPD_R1R0_TYPE BIT(2)
+/* MTK_PULL_RSEL_TYPE can select resistance and can be
+ * turned on/off itself. But it can't be selected pull up/down
+ */
+#define MTK_PULL_RSEL_TYPE BIT(3)
+/* MTK_PULL_PU_PD_RSEL_TYPE is a type which is controlled by
+ * MTK_PULL_PU_PD_TYPE and MTK_PULL_RSEL_TYPE.
+ */
+#define MTK_PULL_PU_PD_RSEL_TYPE (MTK_PULL_PU_PD_TYPE \
+ | MTK_PULL_RSEL_TYPE)
+#define MTK_PULL_TYPE_MASK (MTK_PULL_PU_PD_TYPE |\
+ MTK_PULL_PULLSEL_TYPE |\
+ MTK_PULL_PUPD_R1R0_TYPE |\
+ MTK_PULL_RSEL_TYPE)

#define EINT_NA U16_MAX
#define NO_EINT_SUPPORT EINT_NA
@@ -42,6 +58,14 @@
PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
_x_bits, 32, 1)

+#define PIN_RSEL(_s_pin, _e_pin, _rsel_index, _up_resl, _down_rsel) { \
+ .s_pin = _s_pin, \
+ .e_pin = _e_pin, \
+ .rsel_index = _rsel_index, \
+ .up_rsel = _up_resl, \
+ .down_rsel = _down_rsel, \
+ }
+
/* List these attributes which could be modified for the pin */
enum {
PINCTRL_PIN_REG_MODE,
@@ -67,6 +91,7 @@ enum {
PINCTRL_PIN_REG_DRV_E0,
PINCTRL_PIN_REG_DRV_E1,
PINCTRL_PIN_REG_DRV_ADV,
+ PINCTRL_PIN_REG_RSEL,
PINCTRL_PIN_REG_MAX,
};

@@ -129,6 +154,22 @@ struct mtk_pin_field_calc {
u8 fixed;
};

+/**
+ * struct mtk_pin_rsel - the structure that provides bias resistance selection.
+ * @s_pin: the start pin within the rsel range
+ * @e_pin: the end pin within the rsel range
+ * @rsel_index: the rsel bias resistance index
+ * @up_rsel: the pullup rsel bias resistance value
+ * @down_rsel: the pulldown rsel bias resistance value
+ */
+struct mtk_pin_rsel {
+ u16 s_pin;
+ u16 e_pin;
+ u16 rsel_index;
+ u32 up_rsel;
+ u32 down_rsel;
+};
+
/* struct mtk_pin_reg_calc - the structure that holds all ranges used to
* determine which register the pin would make use of
* for certain pin attribute.
@@ -206,6 +247,9 @@ struct mtk_pin_soc {
bool ies_present;
const char * const *base_names;
unsigned int nbase_names;
+ const unsigned int *pull_type;
+ const struct mtk_pin_rsel *pin_rsel;
+ unsigned int npin_rsel;

/* Specific pinconfig operations */
int (*bias_disable_set)(struct mtk_pinctrl *hw,
@@ -254,6 +298,8 @@ struct mtk_pinctrl {
const char **grp_names;
/* lock pin's register resource to avoid multiple threads issue*/
spinlock_t lock;
+ /* identify rsel setting by si unit or rsel define in dts node */
+ bool rsel_si_unit;
};

void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set);
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 38aec0177d15..d4e02c5d74a8 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -579,8 +579,9 @@ static int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int
ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
unsigned int gpio, char *buf, unsigned int buf_len)
{
- int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1;
+ int pinmux, pullup, pullen, len = 0, r1 = -1, r0 = -1, rsel = -1;
const struct mtk_pin_desc *desc;
+ u32 try_all_type;

if (gpio >= hw->soc->npins)
return -EINVAL;
@@ -591,24 +592,39 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
pinmux -= hw->soc->nfuncs;

mtk_pinconf_bias_get_combo(hw, desc, &pullup, &pullen);
- if (pullen == MTK_PUPD_SET_R1R0_00) {
- pullen = 0;
- r1 = 0;
- r0 = 0;
- } else if (pullen == MTK_PUPD_SET_R1R0_01) {
- pullen = 1;
- r1 = 0;
- r0 = 1;
- } else if (pullen == MTK_PUPD_SET_R1R0_10) {
- pullen = 1;
- r1 = 1;
- r0 = 0;
- } else if (pullen == MTK_PUPD_SET_R1R0_11) {
+
+ if (hw->soc->pull_type)
+ try_all_type = hw->soc->pull_type[desc->number];
+
+ if (hw->rsel_si_unit && (try_all_type & MTK_PULL_RSEL_TYPE)) {
+ rsel = pullen;
pullen = 1;
- r1 = 1;
- r0 = 1;
- } else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
- pullen = 0;
+ } else {
+ /* Case for: R1R0 */
+ if (pullen == MTK_PUPD_SET_R1R0_00) {
+ pullen = 0;
+ r1 = 0;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_01) {
+ pullen = 1;
+ r1 = 0;
+ r0 = 1;
+ } else if (pullen == MTK_PUPD_SET_R1R0_10) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_11) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 1;
+ }
+
+ /* Case for: RSEL */
+ if (pullen >= MTK_PULL_SET_RSEL_000 &&
+ pullen <= MTK_PULL_SET_RSEL_111) {
+ rsel = pullen - MTK_PULL_SET_RSEL_000;
+ pullen = 1;
+ }
}
len += scnprintf(buf + len, buf_len - len,
"%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
@@ -626,6 +642,8 @@ ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
if (r1 != -1) {
len += scnprintf(buf + len, buf_len - len, " (%1d %1d)\n",
r1, r0);
+ } else if (rsel != -1) {
+ len += scnprintf(buf + len, buf_len - len, " (%1d)\n", rsel);
} else {
len += scnprintf(buf + len, buf_len - len, "\n");
}
@@ -970,6 +988,12 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,

hw->nbase = hw->soc->nbase_names;

+ if (of_find_property(hw->dev->of_node,
+ "mediatek,rsel_resistance_in_si_unit", NULL))
+ hw->rsel_si_unit = true;
+ else
+ hw->rsel_si_unit = false;
+
spin_lock_init(&hw->lock);

err = mtk_pctrl_build_state(pdev);
--
2.25.1

2021-09-24 08:11:45

by Zhiyong Tao

[permalink] [raw]
Subject: [PATCH v14 5/5] pinctrl: mediatek: add rsel setting on MT8195

I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on MT8195

Signed-off-by: Zhiyong Tao <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
---
drivers/pinctrl/mediatek/pinctrl-mt8195.c | 133 ++++++++++++++++++++++
1 file changed, 133 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8195.c b/drivers/pinctrl/mediatek/pinctrl-mt8195.c
index a7500e18bb1d..9ba86c80c07a 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8195.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8195.c
@@ -779,6 +779,135 @@ static const struct mtk_pin_field_calc mt8195_pin_drv_adv_range[] = {
PIN_FIELD_BASE(45, 45, 1, 0x040, 0x10, 9, 3),
};

+static const struct mtk_pin_field_calc mt8195_pin_rsel_range[] = {
+ PIN_FIELD_BASE(8, 8, 4, 0x0c0, 0x10, 15, 3),
+ PIN_FIELD_BASE(9, 9, 4, 0x0c0, 0x10, 0, 3),
+ PIN_FIELD_BASE(10, 10, 4, 0x0c0, 0x10, 18, 3),
+ PIN_FIELD_BASE(11, 11, 4, 0x0c0, 0x10, 3, 3),
+ PIN_FIELD_BASE(12, 12, 4, 0x0c0, 0x10, 21, 3),
+ PIN_FIELD_BASE(13, 13, 4, 0x0c0, 0x10, 6, 3),
+ PIN_FIELD_BASE(14, 14, 4, 0x0c0, 0x10, 24, 3),
+ PIN_FIELD_BASE(15, 15, 4, 0x0c0, 0x10, 9, 3),
+ PIN_FIELD_BASE(16, 16, 4, 0x0c0, 0x10, 27, 3),
+ PIN_FIELD_BASE(17, 17, 4, 0x0c0, 0x10, 12, 3),
+ PIN_FIELD_BASE(29, 29, 2, 0x080, 0x10, 0, 3),
+ PIN_FIELD_BASE(30, 30, 2, 0x080, 0x10, 3, 3),
+ PIN_FIELD_BASE(34, 34, 1, 0x0e0, 0x10, 0, 3),
+ PIN_FIELD_BASE(35, 35, 1, 0x0e0, 0x10, 3, 3),
+ PIN_FIELD_BASE(44, 44, 1, 0x0e0, 0x10, 6, 3),
+ PIN_FIELD_BASE(45, 45, 1, 0x0e0, 0x10, 9, 3),
+};
+
+static const struct mtk_pin_rsel mt8195_pin_rsel_val_range[] = {
+ PIN_RSEL(8, 17, 0x0, 75000, 75000),
+ PIN_RSEL(8, 17, 0x1, 10000, 5000),
+ PIN_RSEL(8, 17, 0x2, 5000, 75000),
+ PIN_RSEL(8, 17, 0x3, 4000, 5000),
+ PIN_RSEL(8, 17, 0x4, 3000, 75000),
+ PIN_RSEL(8, 17, 0x5, 2000, 5000),
+ PIN_RSEL(8, 17, 0x6, 1500, 75000),
+ PIN_RSEL(8, 17, 0x7, 1000, 5000),
+ PIN_RSEL(29, 30, 0x0, 75000, 75000),
+ PIN_RSEL(29, 30, 0x1, 10000, 5000),
+ PIN_RSEL(29, 30, 0x2, 5000, 75000),
+ PIN_RSEL(29, 30, 0x3, 4000, 5000),
+ PIN_RSEL(29, 30, 0x4, 3000, 75000),
+ PIN_RSEL(29, 30, 0x5, 2000, 5000),
+ PIN_RSEL(29, 30, 0x6, 1500, 75000),
+ PIN_RSEL(29, 30, 0x7, 1000, 5000),
+ PIN_RSEL(34, 35, 0x0, 75000, 75000),
+ PIN_RSEL(34, 35, 0x1, 10000, 5000),
+ PIN_RSEL(34, 35, 0x2, 5000, 75000),
+ PIN_RSEL(34, 35, 0x3, 4000, 5000),
+ PIN_RSEL(34, 35, 0x4, 3000, 75000),
+ PIN_RSEL(34, 35, 0x5, 2000, 5000),
+ PIN_RSEL(34, 35, 0x6, 1500, 75000),
+ PIN_RSEL(34, 35, 0x7, 1000, 5000),
+ PIN_RSEL(44, 45, 0x0, 75000, 75000),
+ PIN_RSEL(44, 45, 0x1, 10000, 5000),
+ PIN_RSEL(44, 45, 0x2, 5000, 75000),
+ PIN_RSEL(44, 45, 0x3, 4000, 5000),
+ PIN_RSEL(44, 45, 0x4, 3000, 75000),
+ PIN_RSEL(44, 45, 0x5, 2000, 5000),
+ PIN_RSEL(44, 45, 0x6, 1500, 75000),
+ PIN_RSEL(44, 45, 0x7, 1000, 5000),
+};
+
+static const unsigned int mt8195_pull_type[] = {
+ MTK_PULL_PUPD_R1R0_TYPE /* 0 */, MTK_PULL_PUPD_R1R0_TYPE /* 1 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 2 */, MTK_PULL_PUPD_R1R0_TYPE /* 3 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 4 */, MTK_PULL_PUPD_R1R0_TYPE /* 5 */,
+ MTK_PULL_PU_PD_TYPE /* 6 */, MTK_PULL_PU_PD_TYPE /* 7 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 8 */, MTK_PULL_PU_PD_RSEL_TYPE /* 9 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 10 */, MTK_PULL_PU_PD_RSEL_TYPE /* 11 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 12 */, MTK_PULL_PU_PD_RSEL_TYPE /* 13 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 14 */, MTK_PULL_PU_PD_RSEL_TYPE /* 15 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 16 */, MTK_PULL_PU_PD_RSEL_TYPE /* 17 */,
+ MTK_PULL_PU_PD_TYPE /* 18 */, MTK_PULL_PU_PD_TYPE /* 19 */,
+ MTK_PULL_PU_PD_TYPE /* 20 */, MTK_PULL_PU_PD_TYPE /* 21 */,
+ MTK_PULL_PU_PD_TYPE /* 22 */, MTK_PULL_PU_PD_TYPE /* 23 */,
+ MTK_PULL_PU_PD_TYPE /* 24 */, MTK_PULL_PU_PD_TYPE /* 25 */,
+ MTK_PULL_PU_PD_TYPE /* 26 */, MTK_PULL_PU_PD_TYPE /* 27 */,
+ MTK_PULL_PU_PD_TYPE /* 28 */, MTK_PULL_PU_PD_RSEL_TYPE /* 29 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 30 */, MTK_PULL_PU_PD_TYPE /* 31 */,
+ MTK_PULL_PU_PD_TYPE /* 32 */, MTK_PULL_PU_PD_TYPE /* 33 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 34 */, MTK_PULL_PU_PD_RSEL_TYPE /* 35 */,
+ MTK_PULL_PU_PD_TYPE /* 36 */, MTK_PULL_PU_PD_TYPE /* 37 */,
+ MTK_PULL_PU_PD_TYPE /* 38 */, MTK_PULL_PU_PD_TYPE /* 39 */,
+ MTK_PULL_PU_PD_TYPE /* 40 */, MTK_PULL_PU_PD_TYPE /* 41 */,
+ MTK_PULL_PU_PD_TYPE /* 42 */, MTK_PULL_PU_PD_TYPE /* 43 */,
+ MTK_PULL_PU_PD_RSEL_TYPE /* 44 */, MTK_PULL_PU_PD_RSEL_TYPE /* 45 */,
+ MTK_PULL_PU_PD_TYPE /* 46 */, MTK_PULL_PU_PD_TYPE /* 47 */,
+ MTK_PULL_PU_PD_TYPE /* 48 */, MTK_PULL_PU_PD_TYPE /* 49 */,
+ MTK_PULL_PU_PD_TYPE /* 50 */, MTK_PULL_PU_PD_TYPE /* 51 */,
+ MTK_PULL_PU_PD_TYPE /* 52 */, MTK_PULL_PU_PD_TYPE /* 53 */,
+ MTK_PULL_PU_PD_TYPE /* 54 */, MTK_PULL_PU_PD_TYPE /* 55 */,
+ MTK_PULL_PU_PD_TYPE /* 56 */, MTK_PULL_PU_PD_TYPE /* 57 */,
+ MTK_PULL_PU_PD_TYPE /* 58 */, MTK_PULL_PU_PD_TYPE /* 59 */,
+ MTK_PULL_PU_PD_TYPE /* 60 */, MTK_PULL_PU_PD_TYPE /* 61 */,
+ MTK_PULL_PU_PD_TYPE /* 62 */, MTK_PULL_PU_PD_TYPE /* 63 */,
+ MTK_PULL_PU_PD_TYPE /* 64 */, MTK_PULL_PU_PD_TYPE /* 65 */,
+ MTK_PULL_PU_PD_TYPE /* 66 */, MTK_PULL_PU_PD_TYPE /* 67 */,
+ MTK_PULL_PU_PD_TYPE /* 68 */, MTK_PULL_PU_PD_TYPE /* 69 */,
+ MTK_PULL_PU_PD_TYPE /* 70 */, MTK_PULL_PU_PD_TYPE /* 71 */,
+ MTK_PULL_PU_PD_TYPE /* 72 */, MTK_PULL_PU_PD_TYPE /* 73 */,
+ MTK_PULL_PU_PD_TYPE /* 74 */, MTK_PULL_PU_PD_TYPE /* 75 */,
+ MTK_PULL_PU_PD_TYPE /* 76 */, MTK_PULL_PUPD_R1R0_TYPE /* 77 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 78 */, MTK_PULL_PUPD_R1R0_TYPE /* 79 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 80 */, MTK_PULL_PUPD_R1R0_TYPE /* 81 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 82 */, MTK_PULL_PUPD_R1R0_TYPE /* 83 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 84 */, MTK_PULL_PUPD_R1R0_TYPE /* 85 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 86 */, MTK_PULL_PUPD_R1R0_TYPE /* 87 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 88 */, MTK_PULL_PUPD_R1R0_TYPE /* 89 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 90 */, MTK_PULL_PUPD_R1R0_TYPE /* 91 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 92 */, MTK_PULL_PUPD_R1R0_TYPE /* 93 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 94 */, MTK_PULL_PUPD_R1R0_TYPE /* 95 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 96 */, MTK_PULL_PU_PD_TYPE /* 97 */,
+ MTK_PULL_PU_PD_TYPE /* 98 */, MTK_PULL_PU_PD_TYPE /* 99 */,
+ MTK_PULL_PU_PD_TYPE /* 100 */, MTK_PULL_PU_PD_TYPE /* 101 */,
+ MTK_PULL_PU_PD_TYPE /* 102 */, MTK_PULL_PU_PD_TYPE /* 103 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 104 */, MTK_PULL_PUPD_R1R0_TYPE /* 105 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 106 */, MTK_PULL_PUPD_R1R0_TYPE /* 107 */,
+ MTK_PULL_PU_PD_TYPE /* 108 */, MTK_PULL_PU_PD_TYPE /* 109 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 110 */, MTK_PULL_PUPD_R1R0_TYPE /* 111 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 112 */, MTK_PULL_PUPD_R1R0_TYPE /* 113 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 114 */, MTK_PULL_PUPD_R1R0_TYPE /* 115 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 116 */, MTK_PULL_PUPD_R1R0_TYPE /* 117 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 118 */, MTK_PULL_PUPD_R1R0_TYPE /* 119 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 120 */, MTK_PULL_PUPD_R1R0_TYPE /* 121 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 122 */, MTK_PULL_PUPD_R1R0_TYPE /* 123 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 124 */, MTK_PULL_PUPD_R1R0_TYPE /* 125 */,
+ MTK_PULL_PUPD_R1R0_TYPE /* 126 */, MTK_PULL_PUPD_R1R0_TYPE /* 127 */,
+ MTK_PULL_PU_PD_TYPE /* 128 */, MTK_PULL_PU_PD_TYPE /* 129 */,
+ MTK_PULL_PU_PD_TYPE /* 130 */, MTK_PULL_PU_PD_TYPE /* 131 */,
+ MTK_PULL_PU_PD_TYPE /* 132 */, MTK_PULL_PU_PD_TYPE /* 133 */,
+ MTK_PULL_PU_PD_TYPE /* 134 */, MTK_PULL_PU_PD_TYPE /* 135 */,
+ MTK_PULL_PU_PD_TYPE /* 136 */, MTK_PULL_PU_PD_TYPE /* 137 */,
+ MTK_PULL_PU_PD_TYPE /* 138 */, MTK_PULL_PU_PD_TYPE /* 139 */,
+ MTK_PULL_PU_PD_TYPE /* 140 */, MTK_PULL_PU_PD_TYPE /* 141 */,
+ MTK_PULL_PU_PD_TYPE /* 142 */, MTK_PULL_PU_PD_TYPE /* 143 */,
+};
+
static const struct mtk_pin_reg_calc mt8195_reg_cals[PINCTRL_PIN_REG_MAX] = {
[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8195_pin_mode_range),
[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8195_pin_dir_range),
@@ -793,6 +922,7 @@ static const struct mtk_pin_reg_calc mt8195_reg_cals[PINCTRL_PIN_REG_MAX] = {
[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8195_pin_r0_range),
[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8195_pin_r1_range),
[PINCTRL_PIN_REG_DRV_ADV] = MTK_RANGE(mt8195_pin_drv_adv_range),
+ [PINCTRL_PIN_REG_RSEL] = MTK_RANGE(mt8195_pin_rsel_range),
};

static const char * const mt8195_pinctrl_register_base_names[] = {
@@ -817,6 +947,9 @@ static const struct mtk_pin_soc mt8195_data = {
.gpio_m = 0,
.base_names = mt8195_pinctrl_register_base_names,
.nbase_names = ARRAY_SIZE(mt8195_pinctrl_register_base_names),
+ .pull_type = mt8195_pull_type,
+ .pin_rsel = mt8195_pin_rsel_val_range,
+ .npin_rsel = ARRAY_SIZE(mt8195_pin_rsel_val_range),
.bias_set_combo = mtk_pinconf_bias_set_combo,
.bias_get_combo = mtk_pinconf_bias_get_combo,
.drive_set = mtk_pinconf_drive_set_rev1,
--
2.25.1

2021-09-24 10:56:29

by Chen-Yu Tsai

[permalink] [raw]
Subject: Re: [PATCH v14 4/5] pinctrl: mediatek: support rsel feature

On Fri, Sep 24, 2021 at 4:07 PM Zhiyong Tao <[email protected]> wrote:
>
> This patch supports rsel(resistance selection) feature for I2C pins.
> It provides more resistance selection solution in different ICs.
> It provides rsel define and si unit solution by identifying
> "mediatek,rsel_resistance_in_si_unit" property in pio dtsi node.
>
> Signed-off-by: Zhiyong Tao <[email protected]>

Reviewed-by: Chen-Yu Tsai <[email protected]>

2021-09-28 22:04:33

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v14 0/5] Mediatek pinctrl patch on mt8195

On Fri, Sep 24, 2021 at 10:06 AM Zhiyong Tao <[email protected]> wrote:

> This series includes 5 patches:
> 1.add rsel define.
> 2.change pull up/down description
> 3.fix coding style
> 4.support rsel feature for common ICs
> 5.add rsel setting on MT8195
>
> Changes in patch v14:

Finally applied this v14 patch set for v5.16!

If any further fixes are needed we can deal with them on top.

Yours,
Linus Walleij

2021-09-29 22:37:52

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH v14 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description

On Fri, Sep 24, 2021 at 04:06:29PM +0800, Zhiyong Tao wrote:
> For supporting SI units in "bias-pull-down" & "bias-pull-up",
> change pull up/down description
> and add "mediatek,rsel_resistance_in_si_unit" description.
>
> Signed-off-by: Zhiyong Tao <[email protected]>
> ---
> .../bindings/pinctrl/pinctrl-mt8195.yaml | 86 ++++++++++++++++++-
> 1 file changed, 84 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> index 2f12ec59eee5..5f642bef72af 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> @@ -49,6 +49,12 @@ properties:
> description: The interrupt outputs to sysirq.
> maxItems: 1
>
> + mediatek,rsel_resistance_in_si_unit:

s/_/-/

> + type: boolean
> + description: |
> + Identifying i2c pins pull up/down type which is RSEL. It can support
> + RSEL define or si unit value(ohm) to set different resistance.

Aren't the RSEL and ohms disjoint values? 0-207 for RSEL and >1000 for
ohms. Why is this property even needed.

> +
> #PIN CONFIGURATION NODES
> patternProperties:
> '-pins$':
> @@ -85,9 +91,85 @@ patternProperties:
> 2/4/6/8/10/12/14/16mA in mt8195.
> enum: [0, 1, 2, 3, 4, 5, 6, 7]
>
> - bias-pull-down: true
> + bias-pull-down:
> + description: |
> + For pull down type is normal, it don't need add RSEL & R1R0 define
> + and resistance value.
> + For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
> + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> + define in mt8195.
> + For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
> + to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
> + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
> + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> + define in mt8195. It can also support resistance value(ohm) "75000" & "5000" in mt8195.
> + oneOf:

Because of the indentation, this is all just part of 'description'.

> + - enum: [100, 101, 102, 103]
> + - description: mt8195 pull down PUPD/R0/R1 type define value.

This entry is always true.

> + - enum: [200, 201, 202, 203, 204, 205, 206, 207]

Are these supposed to be hex?

> + - description: mt8195 pull down RSEL type define value.

And so is this one. That makes 'oneOf' always false.

> + - enum: [75000, 5000]
> + - description: mt8195 pull down RSEL type si unit value(ohm).
> +
> + An example of using RSEL define:
> + pincontroller {
> + i2c0_pin {
> + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> + bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> + };
> + };
> + An example of using si unit resistance value(ohm):
> + &pio {
> + mediatek,rsel_resistance_in_si_unit;
> + }
> + pincontroller {
> + i2c0_pin {
> + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> + bias-pull-down = <75000>;
> + };
> + };
>
> - bias-pull-up: true
> + bias-pull-up:
> + description: |
> + For pull up type is normal, it don't need add RSEL & R1R0 define
> + and resistance value.
> + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
> + set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
> + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
> + define in mt8195.
> + For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
> + to set different resistance by identifying property "mediatek,rsel_resistance_in_si_unit".
> + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
> + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
> + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
> + define in mt8195. It can also support resistance value(ohm)
> + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8195.
> + oneOf:
> + - enum: [100, 101, 102, 103]
> + - description: mt8195 pull up PUPD/R0/R1 type define value.
> + - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> + - description: mt8195 pull up RSEL type define value.
> + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
> + - description: mt8195 pull up RSEL type si unit value(ohm).

Same issues here.

> + An example of using RSEL define:
> + pincontroller {
> + i2c0_pin {
> + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> + bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> + };
> + };
> + An example of using si unit resistance value(ohm):
> + &pio {
> + mediatek,rsel_resistance_in_si_unit;
> + }
> + pincontroller {
> + i2c0_pin {
> + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> + bias-pull-up = <1000>;
> + };
> + };
>
> bias-disable: true
>
> --
> 2.25.1
>
>

2021-09-30 18:52:58

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v14 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description

On Thu, Sep 30, 2021 at 3:54 AM zhiyong.tao <[email protected]> wrote:

> > > + mediatek,rsel_resistance_in_si_unit:
> >
> > s/_/-/
>
> Hi Rob,
>
> what do you mean?

It's a search/replace syntax used in sed (stream editor) meaning
"replace _ with -" i.e.
mediatek,rsel-resistance-in-si-unit

Yours,
Linus Walleij

2021-09-30 21:00:16

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v14 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description

Hi Rob,

how do you want me to act with this patch set, as it is already
merged and I was pretty happy since it is a v14 and feeling
it was getting a bit over-reviewed....

Are the binding problems solvable in incremental patches
or do you think I should pull out the patch series?

Yours,
Linus Walleij

2021-10-13 06:52:18

by Chen-Yu Tsai

[permalink] [raw]
Subject: Re: [PATCH v14 2/5] dt-bindings: pinctrl: mt8195: change pull up/down description

On Thu, Sep 30, 2021 at 9:59 AM zhiyong.tao <[email protected]> wrote:
>
> On Wed, 2021-09-29 at 16:47 -0500, Rob Herring wrote:
> > On Fri, Sep 24, 2021 at 04:06:29PM +0800, Zhiyong Tao wrote:
> > > For supporting SI units in "bias-pull-down" & "bias-pull-up",
> > > change pull up/down description
> > > and add "mediatek,rsel_resistance_in_si_unit" description.
> > >
> > > Signed-off-by: Zhiyong Tao <[email protected]>
> > > ---
> > > .../bindings/pinctrl/pinctrl-mt8195.yaml | 86
> > > ++++++++++++++++++-
> > > 1 file changed, 84 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > > mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-
> > > mt8195.yaml
> > > index 2f12ec59eee5..5f642bef72af 100644
> > > --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > > +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
> > > @@ -49,6 +49,12 @@ properties:
> > > description: The interrupt outputs to sysirq.
> > > maxItems: 1
> > >
> > > + mediatek,rsel_resistance_in_si_unit:
> >
> > s/_/-/
>
> Hi Rob,
>
> what do you mean?

He means: replace the hyphens ("-") with underscores ("_").
(s/X/Y/ is a regular expression.)

> >
> > > + type: boolean
> > > + description: |
> > > + Identifying i2c pins pull up/down type which is RSEL. It can
> > > support
> > > + RSEL define or si unit value(ohm) to set different
> > > resistance.
> >
> > Aren't the RSEL and ohms disjoint values? 0-207 for RSEL and >1000
> > for
> > ohms. Why is this property even needed.
> >
> No, they aren't.
> As we talked in v11. "mediatek,rsel_resistance_in_si_unit" is only a
> flag.
>
>
>
> Hi ChenYu,
>
> In the next version, we provide a solution which we discussed internal
> to avoid value clashes.
>
> The solution:
> 1. We will keep the define "MTK_PULL_SET_RSEL_000 200". It won't
> change.
>
> 2. We will add a property in pio dtsi node, for example,
> the property name is "rsel_resistance_in_si_unit".
> We will add a flag "rsel_si_unit" in pinctrl device.
> in probe function, we will identify the property name
> "rsel_resistance_in_si_unit" to set the flag "rsel_si_unit" value.
> So it can void value clashes.
>
> 3.We will provide the define "MTK_PULL_SET_RSEL_000 200" and si unit
> two solution. users can support which solution by add property
> "rsel_resistance_in_si_unit" in dts node or not.

Right. I thought that is what is implemented in this version already?

Also I just realized that this binding is limited in scope to just the
MT8195, for which we already know that the RSEL values do not overlap
with MTK_PULL_SET_RSEL_*. I assume that is why Rob thinks the flag
is unnecessary.

> > > +
> > > #PIN CONFIGURATION NODES
> > > patternProperties:
> > > '-pins$':
> > > @@ -85,9 +91,85 @@ patternProperties:
> > > 2/4/6/8/10/12/14/16mA in mt8195.
> > > enum: [0, 1, 2, 3, 4, 5, 6, 7]
> > >
> > > - bias-pull-down: true
> > > + bias-pull-down:
> > > + description: |
> > > + For pull down type is normal, it don't need add RSEL &
> > > R1R0 define
> > > + and resistance value.
> > > + For pull down type is PUPD/R0/R1 type, it can add R1R0
> > > define to
> > > + set different resistance. It can support
> > > "MTK_PUPD_SET_R1R0_00" &
> > > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > > "MTK_PUPD_SET_R1R0_11"
> > > + define in mt8195.
> > > + For pull down type is RSEL, it can add RSEL define &
> > > resistance value(ohm)
> > > + to set different resistance by identifying property
> > > "mediatek,rsel_resistance_in_si_unit".
> > > + It can support "MTK_PULL_SET_RSEL_000" &
> > > "MTK_PULL_SET_RSEL_001"
> > > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > > "MTK_PULL_SET_RSEL_100"
> > > + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > > "MTK_PULL_SET_RSEL_111"
> > > + define in mt8195. It can also support resistance
> > > value(ohm) "75000" & "5000" in mt8195.
> > > + oneOf:
> >
> > Because of the indentation, this is all just part of 'description'.
>
> Can you help to give some suggestion to fix it?

Unindent it by two spaces, so that it is at the same level with
"description:".

> > > + - enum: [100, 101, 102, 103]
> > > + - description: mt8195 pull down PUPD/R0/R1 type define
> > > value.
> >
> > This entry is always true.
>
> why is it always true? we only get define value.
> "100~104" are means that "#define MTK_PUPD_SET_R1R0_10 102" in
> include/dt-bindings/pinctrl/mt65xx.h.

"description" is not a conditional match, so it always evaluates to true.
Based on my limited DT schema and YAML knowledge, I think the underlying
issue is that you have the structure incorrectly defined.

"-" denotes a list item. So in your example, you have "enum" and "description"
as separate associative arrays, each as a list item part of the "oneOf" list.

What you want is actually:

oneOf:
- enum: [100, 101, 102, 103]
description: mt8195 pull down PUPD/R0/R1 type define value.
- enum: [200, 201, 202, 203, 204, 205, 206, 207]
description: mt8195 pull down RSEL type define value.

So that "enum" and "description" are part of the same associative array.
Note the lack of a "-" and the extra indentation in front of "description".


Regards
ChenYu


> >
> > > + - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> >
> > Are these supposed to be hex?
> yes, it is patch 1/5 define "#define MTK_PULL_SET_RSEL_000 200".
> >
> > > + - description: mt8195 pull down RSEL type define
> > > value.
> >
> > And so is this one. That makes 'oneOf' always false.
>
> why is it always false? we only get the si unit value.
>
> >
> > > + - enum: [75000, 5000]
> > > + - description: mt8195 pull down RSEL type si unit
> > > value(ohm).
> > > +
> > > + An example of using RSEL define:
> > > + pincontroller {
> > > + i2c0_pin {
> > > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > > + bias-pull-down = <MTK_PULL_SET_RSEL_001>;
> > > + };
> > > + };
> > > + An example of using si unit resistance value(ohm):
> > > + &pio {
> > > + mediatek,rsel_resistance_in_si_unit;
> > > + }
> > > + pincontroller {
> > > + i2c0_pin {
> > > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > > + bias-pull-down = <75000>;
> > > + };
> > > + };
> > >
> > > - bias-pull-up: true
> > > + bias-pull-up:
> > > + description: |
> > > + For pull up type is normal, it don't need add RSEL &
> > > R1R0 define
> > > + and resistance value.
> > > + For pull up type is PUPD/R0/R1 type, it can add R1R0
> > > define to
> > > + set different resistance. It can support
> > > "MTK_PUPD_SET_R1R0_00" &
> > > + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
> > > "MTK_PUPD_SET_R1R0_11"
> > > + define in mt8195.
> > > + For pull up type is RSEL, it can add RSEL define &
> > > resistance value(ohm)
> > > + to set different resistance by identifying property
> > > "mediatek,rsel_resistance_in_si_unit".
> > > + It can support "MTK_PULL_SET_RSEL_000" &
> > > "MTK_PULL_SET_RSEL_001"
> > > + & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" &
> > > "MTK_PULL_SET_RSEL_100"
> > > + & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" &
> > > "MTK_PULL_SET_RSEL_111"
> > > + define in mt8195. It can also support resistance
> > > value(ohm)
> > > + "1000" & "1500" & "2000" & "3000" & "4000" & "5000" &
> > > "10000" & "75000" in mt8195.
> > > + oneOf:
> > > + - enum: [100, 101, 102, 103]
> > > + - description: mt8195 pull up PUPD/R0/R1 type define
> > > value.
> > > + - enum: [200, 201, 202, 203, 204, 205, 206, 207]
> > > + - description: mt8195 pull up RSEL type define value.
> > > + - enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000,
> > > 75000]
> > > + - description: mt8195 pull up RSEL type si unit
> > > value(ohm).
> >
> > Same issues here.
> >
> > > + An example of using RSEL define:
> > > + pincontroller {
> > > + i2c0_pin {
> > > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > > + bias-pull-up = <MTK_PULL_SET_RSEL_001>;
> > > + };
> > > + };
> > > + An example of using si unit resistance value(ohm):
> > > + &pio {
> > > + mediatek,rsel_resistance_in_si_unit;
> > > + }
> > > + pincontroller {
> > > + i2c0_pin {
> > > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>;
> > > + bias-pull-up = <1000>;
> > > + };
> > > + };
> > >
> > > bias-disable: true
> > >
> > > --
> > > 2.25.1
> > >
> > >
> _______________________________________________
> Linux-mediatek mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-mediatek