2020-07-20 10:02:49

by Chen-Yu Tsai

[permalink] [raw]
Subject: [PATCH v2] regulator: gpio: Honor regulator-boot-on property

From: Chen-Yu Tsai <[email protected]>

When requesting the enable GPIO, the driver should do so with the
correct output level matching some expected state. This is especially
important if the regulator is a critical one, such as a supply for
the boot CPU. This is currently done by checking for the enable-at-boot
property, but this is not documented in the device tree binding, nor
does it match the common regulator properties.

Honor the common regulator-boot-on property by checking the boot_on
constraint setting within the DT probe path. This is the same as what
is done in the fixed regulator driver.

Also drop support for the undocumented enable-at-boot property. This
property was not documented in the original commit introducing DT
support, nor is it now, and there are no in-tree device trees that use
this property.

Fixes: 006694d099e8 ("regulator: gpio-regulator: Allow use of GPIO controlled regulators though DT")
Signed-off-by: Chen-Yu Tsai <[email protected]>
---
drivers/regulator/gpio-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c
index 110ee6fe76c4..5646b7a26288 100644
--- a/drivers/regulator/gpio-regulator.c
+++ b/drivers/regulator/gpio-regulator.c
@@ -148,7 +148,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np,

config->supply_name = config->init_data->constraints.name;

- if (of_property_read_bool(np, "enable-at-boot"))
+ if (config->init_data->constraints.boot_on)
config->enabled_at_boot = true;

of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
--
2.27.0


2020-07-20 11:09:14

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH v2] regulator: gpio: Honor regulator-boot-on property

On Mon, Jul 20, 2020 at 06:01:13PM +0800, Chen-Yu Tsai wrote:

> Also drop support for the undocumented enable-at-boot property. This
> property was not documented in the original commit introducing DT
> support, nor is it now, and there are no in-tree device trees that use
> this property.

There may still be out of tree users, an ABI is an ABI.


Attachments:
(No filename) (357.00 B)
signature.asc (499.00 B)
Download all attachments

2020-07-20 12:05:27

by Chen-Yu Tsai

[permalink] [raw]
Subject: Re: [PATCH v2] regulator: gpio: Honor regulator-boot-on property

On Mon, Jul 20, 2020 at 7:06 PM Mark Brown <[email protected]> wrote:
>
> On Mon, Jul 20, 2020 at 06:01:13PM +0800, Chen-Yu Tsai wrote:
>
> > Also drop support for the undocumented enable-at-boot property. This
> > property was not documented in the original commit introducing DT
> > support, nor is it now, and there are no in-tree device trees that use
> > this property.
>
> There may still be out of tree users, an ABI is an ABI.

Ok. Should I add a comment stating this should not be used in new files?
Or just leave it as it?

ChenYu

2020-07-20 12:06:09

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH v2] regulator: gpio: Honor regulator-boot-on property

On Mon, Jul 20, 2020 at 08:03:06PM +0800, Chen-Yu Tsai wrote:
> On Mon, Jul 20, 2020 at 7:06 PM Mark Brown <[email protected]> wrote:

> > There may still be out of tree users, an ABI is an ABI.

> Ok. Should I add a comment stating this should not be used in new files?
> Or just leave it as it?

A comment would be fine.


Attachments:
(No filename) (333.00 B)
signature.asc (499.00 B)
Download all attachments