2019-08-13 08:55:55

by Light Hsieh (謝明燈)

[permalink] [raw]
Subject: [PATCH v1 0/5] Improve MediaTek pinctrl v2 and make backward compatible to smartphone mass production usage

This patch improves MediaTek pinctrl v2 and makes backward compatible to
current smartphone mass production usage by:
1.Check gpio pin number and use binary search in control address lookup
2.Supporting driving setting without mapping current to register value
3.Correct usage of PIN_CONFIG get/set implementation
4.Backward compatible to previous Mediatek's bias-pull usage
5.Add support for pin configuration dump via sysfs



2019-08-13 10:35:06

by Light Hsieh (謝明燈)

[permalink] [raw]
Subject: [PATCH v1 3/5] pinctrl: mediatek: Refine mtk_pinconf_get() and mtk_pinconf_set()

From: Light Hsieh <[email protected]>

1.Refine mtk_pinconf_get():
1.1 Use only one occurrence of return at end of this function.
1.2 Correct cases for PIN_CONFIG_SLEW_RATE, PIN_CONFIG_INPUT_SCHMITT_ENABLE,
and PIN_CONFIG_OUTPUT_ENABLE -
Use variable ret to receive value in mtk_hw_get_value() (instead of
variable val) since pinconf_to_config_packed() at end of this function
use variable ret to pack config value.

2.Refine mtk_pinconf_set():
2.1 Use only one occurrence of return at end of this function.
2.2 Modify case of PIN_CONFIG_INPUT_ENABLE -
Remove check of ies_present flag and always invoke mtk_hw_set_value()
since mtk_hw_pin_field_lookup() invoked inside mtk_hw_set_value() has
the same effect of checking if ies control is supported.
[The rationale is that: available of a control is always checked
in mtk_hw_pin_field_lookup() and no need to add ies_present flag
specially for ies control.]
2.3 Simply code logic for case of PIN_CONFIG_INPUT_SCHMITT.
2.4 Add case for PIN_CONFIG_INPUT_SCHMITT_ENABLE and process it with the
same code for case of PIN_CONFIG_INPUT_SCHMITT.

Change-Id: Ia82ca7e2516839554feaad6f1aabd9f1bd3b5222
---
drivers/pinctrl/mediatek/pinctrl-mt6765.c | 1 -
drivers/pinctrl/mediatek/pinctrl-paris.c | 204 +++++++++++-------------------
2 files changed, 75 insertions(+), 130 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
index e024ebc..bada37f 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
@@ -1070,7 +1070,6 @@
.ngrps = ARRAY_SIZE(mtk_pins_mt6765),
.eint_hw = &mt6765_eint_hw,
.gpio_m = 0,
- .ies_present = true,
.base_names = mt6765_pinctrl_register_base_names,
.nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
.bias_disable_set = mtk_pinconf_bias_disable_set,
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 71c94b2..bbe3f8a 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -78,93 +78,75 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
{
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
u32 param = pinconf_to_config_param(*config);
- int val, val2, err, reg, ret = 1;
+ int err, reg, ret = 1;
const struct mtk_pin_desc *desc;

desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];

switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_get) {
+ if (hw->soc->bias_disable_get)
err = hw->soc->bias_disable_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_get) {
+ if (hw->soc->bias_get)
err = hw->soc->bias_get(hw, desc, 1, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_get) {
+ if (hw->soc->bias_get)
err = hw->soc->bias_get(hw, desc, 0, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_SLEW_RATE:
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &val);
- if (err)
- return err;
-
- if (!val)
- return -EINVAL;
-
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &ret);
break;
case PIN_CONFIG_INPUT_ENABLE:
case PIN_CONFIG_OUTPUT_ENABLE:
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
if (err)
- return err;
-
- /* HW takes input mode as zero; output mode as non-zero */
- if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
- (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
- return -EINVAL;
+ goto out;
+ /* CONFIG Current direction return value
+ * ------------- ----------------- ----------------------
+ * OUTPUT_ENABLE output 1 (= HW value)
+ * input 0 (= HW value)
+ * INPUT_ENABLE output 0 (= reverse HW value)
+ * input 1 (= reverse HW value)
+ */
+ if (param == PIN_CONFIG_INPUT_ENABLE)
+ ret = !ret;

break;
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
- if (err)
- return err;
-
- err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &val2);
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &ret);
if (err)
- return err;
+ goto out;
+ /* return error when in output mode
+ * because schmitt trigger only work in input mode
+ */
+ if (ret) {
+ err = -EINVAL;
+ goto out;
+ }

- if (val || !val2)
- return -EINVAL;
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &ret);

break;
case PIN_CONFIG_DRIVE_STRENGTH:
- if (hw->soc->drive_get) {
+ if (hw->soc->drive_get)
err = hw->soc->drive_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
+ else
err = -ENOTSUPP;
- }
break;
case MTK_PIN_CONFIG_TDSEL:
case MTK_PIN_CONFIG_RDSEL:
reg = (param == MTK_PIN_CONFIG_TDSEL) ?
PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
err = mtk_hw_get_value(hw, desc, reg, &val);
- if (err)
- return err;
-
- ret = val;
-
break;
case MTK_PIN_CONFIG_PU_ADV:
case MTK_PIN_CONFIG_PD_ADV:
@@ -173,28 +155,24 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,

pullup = param == MTK_PIN_CONFIG_PU_ADV;
err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ } else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_DRV_ADV:
- if (hw->soc->adv_drive_get) {
+ if (hw->soc->adv_drive_get)
err = hw->soc->adv_drive_get(hw, desc, &ret);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
default:
- return -ENOTSUPP;
+ err = -ENOTSUPP;
}

- *config = pinconf_to_config_packed(param, ret);
+out:
+ if (!err)
+ *config = pinconf_to_config_packed(param, ret);

- return 0;
+ return err;
}

static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
@@ -210,60 +188,46 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,

switch ((u32)param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_set) {
+ if (hw->soc->bias_disable_set)
err = hw->soc->bias_disable_set(hw, desc);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_set) {
+ if (hw->soc->bias_set)
err = hw->soc->bias_set(hw, desc, 1);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_set) {
+ if (hw->soc->bias_set)
err = hw->soc->bias_set(hw, desc, 0);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case PIN_CONFIG_OUTPUT_ENABLE:
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
MTK_DISABLE);
- if (err)
+ /* keep set direction to if SMT is not supported on this pin */
+ if (err != -ENOTSUPP)
goto err;

err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
MTK_OUTPUT);
- if (err)
- goto err;
break;
case PIN_CONFIG_INPUT_ENABLE:
- if (hw->soc->ies_present) {
- mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES,
- MTK_ENABLE);
- }
+ /* regard all non-zero value as enable */
+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES, !!arg);

- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
- MTK_INPUT);
if (err)
goto err;
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
+ MTK_INPUT);
break;
case PIN_CONFIG_SLEW_RATE:
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR,
- arg);
- if (err)
- goto err;
-
+ /* regard all non-zero value as enable */
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR, !!arg);
break;
case PIN_CONFIG_OUTPUT:
err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
@@ -273,41 +237,29 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,

err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
arg);
- if (err)
- goto err;
break;
+ case PIN_CONFIG_INPUT_SCHMITT:
case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
- /* arg = 1: Input mode & SMT enable ;
+ /* arg = 1: Input mode & SMT enable
* arg = 0: Output mode & SMT disable
*/
- arg = arg ? 2 : 1;
- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
- arg & 1);
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !arg);
if (err)
goto err;

- err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
- !!(arg & 2));
- if (err)
- goto err;
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, !!arg);
break;
case PIN_CONFIG_DRIVE_STRENGTH:
- if (hw->soc->drive_set) {
+ if (hw->soc->drive_set)
err = hw->soc->drive_set(hw, desc, arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_TDSEL:
case MTK_PIN_CONFIG_RDSEL:
reg = (param == MTK_PIN_CONFIG_TDSEL) ?
PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-
err = mtk_hw_set_value(hw, desc, reg, arg);
- if (err)
- goto err;
break;
case MTK_PIN_CONFIG_PU_ADV:
case MTK_PIN_CONFIG_PD_ADV:
@@ -317,20 +269,14 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
pullup = param == MTK_PIN_CONFIG_PU_ADV;
err = hw->soc->adv_pull_set(hw, desc, pullup,
arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ } else
+ err = -ENOTSUPP;
break;
case MTK_PIN_CONFIG_DRV_ADV:
- if (hw->soc->adv_drive_set) {
+ if (hw->soc->adv_drive_set)
err = hw->soc->adv_drive_set(hw, desc, arg);
- if (err)
- return err;
- } else {
- return -ENOTSUPP;
- }
+ else
+ err = -ENOTSUPP;
break;
default:
err = -ENOTSUPP;
@@ -946,6 +892,7 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
return 0;
}

+
static int mtk_paris_pinctrl_suspend(struct device *device)
{
struct mtk_pinctrl *pctl = dev_get_drvdata(device);
@@ -964,4 +911,3 @@ static int mtk_paris_pinctrl_resume(struct device *device)
.suspend_noirq = mtk_paris_pinctrl_suspend,
.resume_noirq = mtk_paris_pinctrl_resume,
};
-
--
1.8.1.1.dirty

2019-08-13 10:36:11

by Light Hsieh (謝明燈)

[permalink] [raw]
Subject: [PATCH v1 1/5] pinctrl: mediatek: Check gpio pin number and use binary search in mtk_hw_pin_field_lookup()

From: Light Hsieh <[email protected]>

1. Check if gpio pin number is in valid range to prevent from get invalid
pointer 'desc' in the following code:
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];

2. Use binary search in mtk_hw_pin_field_lookup()
Modify mtk_hw_pin_field_lookup() to use binary search for accelerating
search.

Change-Id: I22b4644ec216b90dd9dd5e223cc41d43761701b0
---
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 24 +++++++++++++++++++-----
drivers/pinctrl/mediatek/pinctrl-paris.c | 19 +++++++++++++++++++
2 files changed, 38 insertions(+), 5 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 20e1c89..4687f63 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -68,7 +68,7 @@ static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw,
{
const struct mtk_pin_field_calc *c, *e;
const struct mtk_pin_reg_calc *rc;
- u32 bits;
+ u32 bits, start = 0, end, found = 0, check;

if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) {
rc = &hw->soc->reg_cal[field];
@@ -79,21 +79,32 @@ static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw,
return -ENOTSUPP;
}

+ end = rc->nranges - 1;
c = rc->range;
e = c + rc->nranges;

- while (c < e) {
- if (desc->number >= c->s_pin && desc->number <= c->e_pin)
+ while (start <= end) {
+ check = (start + end) >> 1;
+ if (desc->number >= rc->range[check].s_pin
+ && desc->number <= rc->range[check].e_pin) {
+ found = 1;
break;
- c++;
+ } else if (start == end)
+ break;
+ else if (desc->number < rc->range[check].s_pin)
+ end = check - 1;
+ else
+ start = check + 1;
}

- if (c >= e) {
+ if (!found) {
dev_dbg(hw->dev, "Not support field %d for pin = %d (%s)\n",
field, desc->number, desc->name);
return -ENOTSUPP;
}

+ c = rc->range + check;
+
if (c->i_base > hw->nbase - 1) {
dev_err(hw->dev,
"Invalid base for field %d for pin = %d (%s)\n",
@@ -182,6 +193,9 @@ int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
if (err)
return err;

+ if (value < 0 || value > pf.mask)
+ return -EINVAL;
+
if (!pf.next)
mtk_rmw(hw, pf.index, pf.offset, pf.mask << pf.bitpos,
(value & pf.mask) << pf.bitpos);
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 923264d..28b4951 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -693,6 +693,9 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
const struct mtk_pin_desc *desc;
int value, err;

+ if (gpio > hw->soc->npins)
+ return -EINVAL;
+
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];

err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &value);
@@ -708,6 +711,9 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
const struct mtk_pin_desc *desc;
int value, err;

+ if (gpio > hw->soc->npins)
+ return -EINVAL;
+
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];

err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
@@ -722,6 +728,9 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
struct mtk_pinctrl *hw = gpiochip_get_data(chip);
const struct mtk_pin_desc *desc;

+ if (gpio > hw->soc->npins)
+ return;
+
desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];

mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, !!value);
@@ -729,12 +738,22 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)

static int mtk_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
{
+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
+
+ if (gpio > hw->soc->npins)
+ return -EINVAL;
+
return pinctrl_gpio_direction_input(chip->base + gpio);
}

static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio,
int value)
{
+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
+
+ if (gpio > hw->soc->npins)
+ return -EINVAL;
+
mtk_gpio_set(chip, gpio, value);

return pinctrl_gpio_direction_output(chip->base + gpio);
--
1.8.1.1.dirty

2019-08-13 10:47:06

by Light Hsieh (謝明燈)

[permalink] [raw]
Subject: [PATCH v1 2/5] pinctrl: mediatek: Supporting driving setting without mapping current to register value

From: Light Hsieh <[email protected]>

Mediatek's smarphone project actual usage does need to know current value
(in mA) in procedure of finding the best driving setting.
The steps in the procedure is like as follow:

1. set driving setting field in setting register as 0, measure waveform,
perform test, and etc.
2. set driving setting field in setting register as 1, measure waveform,
perform test, and etc.
...
n. set driving setting field in setting register as n-1, measure
waveform, perform test, and etc.
Check the results of steps 1~n and adopt the setting that get best result.

This procedure does need to know the mapping between current to register
value.
Therefore, setting driving without mapping current is more pratical for
Mediatek's smartphone usage.

Change-Id: Iacdabf0cada230fc5acad96673810c12a6c4556d
---
drivers/pinctrl/mediatek/pinctrl-mt6765.c | 4 ++--
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 21 +++++++++++++++++++++
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 5 +++++
drivers/pinctrl/mediatek/pinctrl-paris.c | 1 +
4 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
index 32451e8..e024ebc 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
@@ -1077,8 +1077,8 @@
.bias_disable_get = mtk_pinconf_bias_disable_get,
.bias_set = mtk_pinconf_bias_set,
.bias_get = mtk_pinconf_bias_get,
- .drive_set = mtk_pinconf_drive_set_rev1,
- .drive_get = mtk_pinconf_drive_get_rev1,
+ .drive_set = mtk_pinconf_drive_set_direct_val,
+ .drive_get = mtk_pinconf_drive_get_direct_val,
.adv_pull_get = mtk_pinconf_adv_pull_get,
.adv_pull_set = mtk_pinconf_adv_pull_set,
};
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 4687f63..23a9529 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -607,6 +607,27 @@ int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
return 0;
}

+/* Revision direct value */
+int mtk_pinconf_drive_set_direct_val(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 arg)
+{
+ int err;
+
+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV, arg);
+
+ return err;
+}
+
+int mtk_pinconf_drive_get_direct_val(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, int *val)
+{
+ int err;
+
+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, val);
+
+ return err;
+}
+
int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, bool pullup,
u32 arg)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index 1b7da42..b3bada0 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -288,6 +288,11 @@ int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, int *val);

+int mtk_pinconf_drive_set_direct_val(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 arg);
+int mtk_pinconf_drive_get_direct_val(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, int *val);
+
int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, bool pullup,
u32 arg);
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 28b4951..71c94b2 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -964,3 +964,4 @@ static int mtk_paris_pinctrl_resume(struct device *device)
.suspend_noirq = mtk_paris_pinctrl_suspend,
.resume_noirq = mtk_paris_pinctrl_resume,
};
+
--
1.8.1.1.dirty

2019-08-13 10:47:21

by Light Hsieh (謝明燈)

[permalink] [raw]
Subject: [PATCH v1 4/5] pinctrl: mediatek: Backward compatible to previous Mediatek's bias-pull usage

From: Light Hsieh <[email protected]>

Refine mtk_pinconf_set()/mtk_pinconf_get() for backward compatibility to
previous Mediatek's bias-pull usage.
In PINCTRL_MTK that use pinctrl-mtk-common.c, bias-pull setting for pins
with 2 pull resistors can be specified as value for bias-pull-up and
bias-pull-down. For example:
bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
bias-pull-down = <MTK_PUPD_SET_R1R0_11>;

On the other hand, PINCTRL_MTK_PARIS use customized properties
"mediatek,pull-up-adv" and "mediatek,pull-down-adv" to specify bias-pull
setting for pins with 2 pull resistors.
This introduce in-compatibility in device tree and increatse porting
effort to Mediatek's customer that had already used PINCTRL_MTK version.
Besides, if customers are not awared of this change and still write devicetree
for PINCTRL_MTK version, they may encounter runtime failure with pinctrl and
spent time to debug.

This patch add backward compatible to previous Mediatek's bias-pull usage
so that Mediatek's customer need not use a new devicetree property name.
The rationale is that: changing driver implemenation had better leave
interface unchanged.

Change-Id: I8ea8f09278acc492ba04771826eaadb70224cd51
---
drivers/pinctrl/mediatek/pinctrl-mt6765.c | 4 +-
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 285 +++++++++++++++++++++++
drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 +
drivers/pinctrl/mediatek/pinctrl-paris.c | 49 ++--
4 files changed, 327 insertions(+), 22 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
index bada37f..315aebd 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
@@ -1074,8 +1074,8 @@
.nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
.bias_disable_set = mtk_pinconf_bias_disable_set,
.bias_disable_get = mtk_pinconf_bias_disable_get,
- .bias_set = mtk_pinconf_bias_set,
- .bias_get = mtk_pinconf_bias_get,
+ .bias_set = mtk_pinconf_bias_set_combo,
+ .bias_get = mtk_pinconf_bias_get_combo,
.drive_set = mtk_pinconf_drive_set_direct_val,
.drive_get = mtk_pinconf_drive_get_direct_val,
.adv_pull_get = mtk_pinconf_adv_pull_get,
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
index 23a9529..dab8418 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
@@ -13,6 +13,8 @@
#include <linux/io.h>
#include <linux/of_irq.h>

+#include <dt-bindings/pinctrl/mt65xx.h>
+
#include "mtk-eint.h"
#include "pinctrl-mtk-common-v2.h"

@@ -205,6 +207,20 @@ int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
return 0;
}

+void mtk_hw_set_value_no_lookup(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ int value, struct mtk_pin_field *pf)
+{
+ if (value < 0 || value > pf->mask)
+ return;
+
+ if (!pf->next)
+ mtk_rmw(hw, pf->index, pf->offset, pf->mask << pf->bitpos,
+ (value & pf->mask) << pf->bitpos);
+ else
+ mtk_hw_write_cross_field(hw, pf, value);
+}
+
int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
int field, int *value)
{
@@ -224,6 +240,17 @@ int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
return 0;
}

+void mtk_hw_get_value_no_lookup(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ int *value, struct mtk_pin_field *pf)
+{
+ if (!pf->next)
+ *value = (mtk_r32(hw, pf->index, pf->offset)
+ >> pf->bitpos) & pf->mask;
+ else
+ mtk_hw_read_cross_field(hw, pf, value);
+}
+
static int mtk_xt_find_eint_num(struct mtk_pinctrl *hw, unsigned long eint_n)
{
const struct mtk_pin_desc *desc;
@@ -516,6 +543,264 @@ int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
return 0;
}

+/* Combo for the following pull register type:
+ * 1. PU + PD
+ * 2. PULLSEL + PULLEN
+ * 3. PUPD + R0 + R1
+ */
+int mtk_pinconf_bias_set_pu_pd(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ struct mtk_pin_field pf;
+ int err = -EINVAL;
+ int pu, pd;
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PU, &pf);
+ if (err)
+ goto out;
+
+ if (arg == MTK_DISABLE) {
+ pu = 0;
+ pd = 0;
+ } else if ((arg == MTK_ENABLE) && pullup) {
+ pu = 1;
+ pd = 0;
+ } else if ((arg == MTK_ENABLE) && !pullup) {
+ pu = 0;
+ pd = 1;
+ } else {
+ goto out;
+ }
+
+ mtk_hw_set_value_no_lookup(hw, desc, pu, &pf);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PD, &pf);
+ if (err)
+ goto out;
+
+ mtk_hw_set_value_no_lookup(hw, desc, pd, &pf);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_set_pullsel_pullen(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ struct mtk_pin_field pf;
+ int err = -EINVAL, enable;
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLEN, &pf);
+ if (err)
+ goto out;
+
+ if (arg == MTK_DISABLE)
+ enable = 0;
+ else if (arg == MTK_ENABLE)
+ enable = 1;
+ else
+ goto out;
+
+ mtk_hw_set_value_no_lookup(hw, desc, enable, &pf);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLSEL, &pf);
+ if (err)
+ goto out;
+ mtk_hw_set_value_no_lookup(hw, desc, pullup, &pf);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ struct mtk_pin_field pf;
+ int err = -EINVAL;
+ int r0, r1;
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PUPD, &pf);
+ if (err)
+ goto out;
+
+ if ((arg == MTK_DISABLE) || (arg == MTK_PUPD_SET_R1R0_00)) {
+ pullup = 0;
+ r0 = 0;
+ r1 = 0;
+ } else if (arg == MTK_PUPD_SET_R1R0_01) {
+ r0 = 1;
+ r1 = 0;
+ } else if (arg == MTK_PUPD_SET_R1R0_10) {
+ r0 = 0;
+ r1 = 1;
+ } else if (arg == MTK_PUPD_SET_R1R0_11) {
+ r0 = 1;
+ r1 = 1;
+ } else
+ goto out;
+
+ /* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
+ mtk_hw_set_value_no_lookup(hw, desc, !pullup, &pf);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R0, &pf);
+ if (err)
+ goto out;
+ mtk_hw_set_value_no_lookup(hw, desc, r0, &pf);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R1, &pf);
+ if (err)
+ goto out;
+ mtk_hw_set_value_no_lookup(hw, desc, r1, &pf);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable)
+{
+ struct mtk_pin_field pf;
+ int err = -EINVAL;
+ int pu, pd;
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PU, &pf);
+ if (err)
+ goto out;
+
+ mtk_hw_get_value_no_lookup(hw, desc, &pu, &pf);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PD, &pf);
+ if (err)
+ goto out;
+
+ mtk_hw_get_value_no_lookup(hw, desc, &pd, &pf);
+
+ if (pu == 0 && pd == 0) {
+ *pullup = 0;
+ *enable = MTK_DISABLE;
+ } else if (pu == 1 && pd == 0) {
+ *pullup = 1;
+ *enable = MTK_ENABLE;
+ } else if (pu == 0 && pd == 1) {
+ *pullup = 0;
+ *enable = MTK_ENABLE;
+ } else {
+ err = -EINVAL;
+ goto out;
+ }
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_get_pullsel_pullen(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable)
+{
+ struct mtk_pin_field pf;
+ int err = -EINVAL;
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLSEL, &pf);
+ if (err)
+ goto out;
+
+ mtk_hw_get_value_no_lookup(hw, desc, pullup, &pf);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLEN, &pf);
+ if (err)
+ goto out;
+
+ mtk_hw_get_value_no_lookup(hw, desc, enable, &pf);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable)
+{
+ struct mtk_pin_field pf;
+ int err = -EINVAL;
+ int r0, r1;
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PUPD, &pf);
+ if (err)
+ goto out;
+
+ /* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
+ mtk_hw_get_value_no_lookup(hw, desc, pullup, &pf);
+ *pullup = !(*pullup);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R0, &pf);
+ if (err)
+ goto out;
+ mtk_hw_get_value_no_lookup(hw, desc, &r0, &pf);
+
+ err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R1, &pf);
+ if (err)
+ goto out;
+ mtk_hw_get_value_no_lookup(hw, desc, &r1, &pf);
+
+ if ((r1 == 0) && (r0 == 0))
+ *enable = MTK_PUPD_SET_R1R0_00;
+ else if ((r1 == 0) && (r0 == 1))
+ *enable = MTK_PUPD_SET_R1R0_01;
+ else if ((r1 == 1) && (r0 == 0))
+ *enable = MTK_PUPD_SET_R1R0_10;
+ else if ((r1 == 1) && (r0 == 1))
+ *enable = MTK_PUPD_SET_R1R0_11;
+ else
+ goto out;
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 arg)
+{
+ int err;
+
+ err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
+ if (!err)
+ goto out;
+
+ err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg);
+ if (!err)
+ goto out;
+
+ err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
+
+out:
+ return err;
+}
+
+int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable)
+{
+ int err;
+
+ err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
+ if (!err)
+ goto out;
+
+ err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable);
+ if (!err)
+ goto out;
+
+ err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
+
+out:
+ return err;
+}
+
/* Revision 0 */
int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, u32 arg)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
index b3bada0..a13dcae 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
@@ -216,6 +216,11 @@ struct mtk_pin_soc {
int (*bias_get)(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, bool pullup, int *res);

+ int (*bias_set_combo)(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 pullup, u32 arg);
+ int (*bias_get_combo)(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc, u32 *pullup, u32 *arg);
+
int (*drive_set)(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, u32 arg);
int (*drive_get)(struct mtk_pinctrl *hw,
@@ -277,6 +282,12 @@ int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, bool pullup,
int *res);
+int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 pullup, u32 enable);
+int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
+ const struct mtk_pin_desc *desc,
+ u32 *pullup, u32 *enable);

int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
const struct mtk_pin_desc *desc, u32 arg);
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index bbe3f8a..0a9440a 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -79,28 +79,38 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
u32 param = pinconf_to_config_param(*config);
int err, reg, ret = 1;
+ int pullup;
const struct mtk_pin_desc *desc;

desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];

switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_get)
- err = hw->soc->bias_disable_get(hw, desc, &ret);
- else
- err = -ENOTSUPP;
- break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_get)
- err = hw->soc->bias_get(hw, desc, 1, &ret);
- else
- err = -ENOTSUPP;
- break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_get)
- err = hw->soc->bias_get(hw, desc, 0, &ret);
- else
+ if (hw->soc->bias_get_combo) {
+ err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
+ if (err)
+ goto out;
+ if (param == PIN_CONFIG_BIAS_DISABLE) {
+ if (ret == MTK_PUPD_SET_R1R0_00)
+ ret = MTK_DISABLE;
+ } else if (param == PIN_CONFIG_BIAS_PULL_UP) {
+ /* When desire to get pull-up value,
+ * return error if current setting is pull-down
+ */
+ if (!pullup)
+ err = -EINVAL;
+ } else if (param == PIN_CONFIG_BIAS_PULL_DOWN) {
+ /* When desire to get pull-down value,
+ * return error if current setting is pull-up
+ */
+ if (pullup)
+ err = -EINVAL;
+ }
+ } else {
err = -ENOTSUPP;
+ }
break;
case PIN_CONFIG_SLEW_RATE:
err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &ret);
@@ -188,20 +198,20 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,

switch ((u32)param) {
case PIN_CONFIG_BIAS_DISABLE:
- if (hw->soc->bias_disable_set)
- err = hw->soc->bias_disable_set(hw, desc);
+ if (hw->soc->bias_set_combo)
+ err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE);
else
err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- if (hw->soc->bias_set)
- err = hw->soc->bias_set(hw, desc, 1);
+ if (hw->soc->bias_set_combo)
+ err = hw->soc->bias_set_combo(hw, desc, 1, arg);
else
err = -ENOTSUPP;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- if (hw->soc->bias_set)
- err = hw->soc->bias_set(hw, desc, 0);
+ if (hw->soc->bias_set_combo)
+ err = hw->soc->bias_set_combo(hw, desc, 0, arg);
else
err = -ENOTSUPP;
break;
@@ -892,7 +902,6 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
return 0;
}

-
static int mtk_paris_pinctrl_suspend(struct device *device)
{
struct mtk_pinctrl *pctl = dev_get_drvdata(device);
--
1.8.1.1.dirty

2019-08-13 10:48:09

by Light Hsieh (謝明燈)

[permalink] [raw]
Subject: [PATCH v1 5/5] pinctrl: mediatek: Add support for pin configuration dump via sysfs.

From: Light Hsieh <[email protected]>

Add support for pin configuration dump via catting
/sys/kernel/debug/pinctrl/$platform_dependent_path/pinconf-pins.
pinctrl framework had already support such dump. This patch implement the
operation function pointer to fullfill this dump.

Change-Id: Ib59212eb47febcd84140cbf84e1bd7286769beb0
---
drivers/pinctrl/mediatek/pinctrl-paris.c | 88 ++++++++++++++++++++++++++++++++
drivers/pinctrl/mediatek/pinctrl-paris.h | 30 +++++++++++
2 files changed, 118 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
index 0a9440a..91d6e72 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.c
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
@@ -531,12 +531,99 @@ static int mtk_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
return 0;
}

+int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int field)
+{
+ const struct mtk_pin_desc *desc;
+ int value, err;
+
+ if (gpio > hw->soc->npins)
+ return -EINVAL;
+
+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
+
+ err = mtk_hw_get_value(hw, desc, field, &value);
+ if (err)
+ return err;
+
+ return value;
+}
+
+ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
+ unsigned int gpio, char *buf, unsigned int bufLen)
+{
+ const struct mtk_pin_desc *desc;
+ int pinmux, pullup, pullen, r1 = -1, r0 = -1, len = 0;
+
+ if (gpio > hw->soc->npins)
+ return -EINVAL;
+
+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
+ pinmux = mtk_pctrl_get_pinmux(hw, gpio);
+ if (pinmux >= hw->soc->nfuncs)
+ pinmux -= hw->soc->nfuncs;
+
+ mtk_pinconf_bias_get_combo(hw, desc, &pullup, &pullen);
+ if (pullen == MTK_PUPD_SET_R1R0_00) {
+ pullen = 0;
+ r1 = 0;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_01) {
+ pullen = 1;
+ r1 = 0;
+ r0 = 1;
+ } else if (pullen == MTK_PUPD_SET_R1R0_10) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 0;
+ } else if (pullen == MTK_PUPD_SET_R1R0_11) {
+ pullen = 1;
+ r1 = 1;
+ r0 = 1;
+ } else if (pullen != MTK_DISABLE && pullen != MTK_ENABLE) {
+ pullen = 0;
+ }
+ len += snprintf(buf + len, bufLen - len,
+ "%03d: %1d%1d%1d%1d%02d%1d%1d%1d%1d",
+ gpio,
+ pinmux,
+ mtk_pctrl_get_direction(hw, gpio),
+ mtk_pctrl_get_out(hw, gpio),
+ mtk_pctrl_get_in(hw, gpio),
+ mtk_pctrl_get_driving(hw, gpio),
+ mtk_pctrl_get_smt(hw, gpio),
+ mtk_pctrl_get_ies(hw, gpio),
+ pullen,
+ pullup);
+
+ if (r1 != -1) {
+ len += snprintf(buf + len, bufLen - len, " (%1d %1d)\n",
+ r1, r0);
+ } else {
+ len += snprintf(buf + len, bufLen - len, "\n");
+ }
+
+ return len;
+}
+
+#define PIN_DBG_BUF_SZ 96
+static void mtk_pctrl_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+ unsigned int gpio)
+{
+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
+ char buf[PIN_DBG_BUF_SZ];
+
+ (void)mtk_pctrl_show_one_pin(hw, gpio, buf, PIN_DBG_BUF_SZ);
+
+ seq_printf(s, "%s", buf);
+}
+
static const struct pinctrl_ops mtk_pctlops = {
.dt_node_to_map = mtk_pctrl_dt_node_to_map,
.dt_free_map = pinctrl_utils_free_map,
.get_groups_count = mtk_pctrl_get_groups_count,
.get_group_name = mtk_pctrl_get_group_name,
.get_group_pins = mtk_pctrl_get_group_pins,
+ .pin_dbg_show = mtk_pctrl_dbg_show,
};

static int mtk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
@@ -633,6 +720,7 @@ static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
.pin_config_get = mtk_pinconf_get,
.pin_config_group_get = mtk_pconf_group_get,
.pin_config_group_set = mtk_pconf_group_set,
+ .is_generic = true,
};

static struct pinctrl_desc mtk_desc = {
diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.h b/drivers/pinctrl/mediatek/pinctrl-paris.h
index 3d43771..d73f4b6 100644
--- a/drivers/pinctrl/mediatek/pinctrl-paris.h
+++ b/drivers/pinctrl/mediatek/pinctrl-paris.h
@@ -60,6 +60,36 @@
int mtk_paris_pinctrl_probe(struct platform_device *pdev,
const struct mtk_pin_soc *soc);

+int mtk_hw_get_value_wrap(struct mtk_pinctrl *hw, unsigned int gpio, int field);
+
+#define mtk_pctrl_get_pinmux(hw, gpio) \
+ mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_MODE)
+
+/* MTK HW use 0 as input, 1 for output
+ * This interface is for get direct register value,
+ * so don't reverse
+ */
+#define mtk_pctrl_get_direction(hw, gpio) \
+ mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DIR)
+
+#define mtk_pctrl_get_out(hw, gpio) \
+ mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DO)
+
+#define mtk_pctrl_get_in(hw, gpio) \
+ mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DI)
+
+#define mtk_pctrl_get_smt(hw, gpio) \
+ mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_SMT)
+
+#define mtk_pctrl_get_ies(hw, gpio) \
+ mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_IES)
+
+#define mtk_pctrl_get_driving(hw, gpio) \
+ mtk_hw_get_value_wrap(hw, gpio, PINCTRL_PIN_REG_DRV)
+
+ssize_t mtk_pctrl_show_one_pin(struct mtk_pinctrl *hw,
+ unsigned int gpio, char *buf, unsigned int bufLen);
+
extern const struct dev_pm_ops mtk_paris_pinctrl_pm_ops;

#endif /* __PINCTRL_PARIS_H */
--
1.8.1.1.dirty

2019-08-13 22:55:30

by Sean Wang

[permalink] [raw]
Subject: Re: [PATCH v1 1/5] pinctrl: mediatek: Check gpio pin number and use binary search in mtk_hw_pin_field_lookup()

On Tue, Aug 13, 2019 at 1:53 AM Light Hsieh <[email protected]> wrote:
>
> From: Light Hsieh <[email protected]>
>
> 1. Check if gpio pin number is in valid range to prevent from get invalid
> pointer 'desc' in the following code:
> desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
>
> 2. Use binary search in mtk_hw_pin_field_lookup()
> Modify mtk_hw_pin_field_lookup() to use binary search for accelerating
> search.
>
> Change-Id: I22b4644ec216b90dd9dd5e223cc41d43761701b0

remove all of Change-Id in all the patches in the series

> ---
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 24 +++++++++++++++++++-----
> drivers/pinctrl/mediatek/pinctrl-paris.c | 19 +++++++++++++++++++
> 2 files changed, 38 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index 20e1c89..4687f63 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -68,7 +68,7 @@ static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw,
> {
> const struct mtk_pin_field_calc *c, *e;
> const struct mtk_pin_reg_calc *rc;
> - u32 bits;
> + u32 bits, start = 0, end, found = 0, check;

variable found should be bool type, and the declaration should be
listed in reverse Xmas tree order

>
> if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) {
> rc = &hw->soc->reg_cal[field];
> @@ -79,21 +79,32 @@ static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw,
> return -ENOTSUPP;
> }
>
> + end = rc->nranges - 1;
> c = rc->range;
> e = c + rc->nranges;
>
> - while (c < e) {
> - if (desc->number >= c->s_pin && desc->number <= c->e_pin)
> + while (start <= end) {
> + check = (start + end) >> 1;
> + if (desc->number >= rc->range[check].s_pin
> + && desc->number <= rc->range[check].e_pin) {
> + found = 1;

found = true;

> break;
> - c++;
> + } else if (start == end)
> + break;
> + else if (desc->number < rc->range[check].s_pin)
> + end = check - 1;
> + else
> + start = check + 1;
> }
>
> - if (c >= e) {
> + if (!found) {
> dev_dbg(hw->dev, "Not support field %d for pin = %d (%s)\n",
> field, desc->number, desc->name);
> return -ENOTSUPP;
> }
>
> + c = rc->range + check;
> +
> if (c->i_base > hw->nbase - 1) {
> dev_err(hw->dev,
> "Invalid base for field %d for pin = %d (%s)\n",
> @@ -182,6 +193,9 @@ int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
> if (err)
> return err;
>
> + if (value < 0 || value > pf.mask)
> + return -EINVAL;
> +
> if (!pf.next)
> mtk_rmw(hw, pf.index, pf.offset, pf.mask << pf.bitpos,
> (value & pf.mask) << pf.bitpos);
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index 923264d..28b4951 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -693,6 +693,9 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
> const struct mtk_pin_desc *desc;
> int value, err;
>
> + if (gpio > hw->soc->npins)
> + return -EINVAL;
> +
> desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
>
> err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &value);
> @@ -708,6 +711,9 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
> const struct mtk_pin_desc *desc;
> int value, err;
>
> + if (gpio > hw->soc->npins)
> + return -EINVAL;
> +
> desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
>
> err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
> @@ -722,6 +728,9 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
> struct mtk_pinctrl *hw = gpiochip_get_data(chip);
> const struct mtk_pin_desc *desc;
>
> + if (gpio > hw->soc->npins)
> + return;
> +
> desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
>
> mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, !!value);
> @@ -729,12 +738,22 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
>
> static int mtk_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
> {
> + struct mtk_pinctrl *hw = gpiochip_get_data(chip);
> +
> + if (gpio > hw->soc->npins)
> + return -EINVAL;
> +
> return pinctrl_gpio_direction_input(chip->base + gpio);
> }
>
> static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio,
> int value)
> {
> + struct mtk_pinctrl *hw = gpiochip_get_data(chip);
> +
> + if (gpio > hw->soc->npins)
> + return -EINVAL;
> +
> mtk_gpio_set(chip, gpio, value);
>
> return pinctrl_gpio_direction_output(chip->base + gpio);
> --
> 1.8.1.1.dirty
>

2019-08-13 23:26:26

by Sean Wang

[permalink] [raw]
Subject: Re: [PATCH v1 4/5] pinctrl: mediatek: Backward compatible to previous Mediatek's bias-pull usage

Hi, Light


On Tue, Aug 13, 2019 at 1:53 AM Light Hsieh <[email protected]> wrote:
>
> From: Light Hsieh <[email protected]>
>
> Refine mtk_pinconf_set()/mtk_pinconf_get() for backward compatibility to
> previous Mediatek's bias-pull usage.
> In PINCTRL_MTK that use pinctrl-mtk-common.c, bias-pull setting for pins
> with 2 pull resistors can be specified as value for bias-pull-up and
> bias-pull-down. For example:
> bias-pull-up = <MTK_PUPD_SET_R1R0_00>;
> bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
> bias-pull-down = <MTK_PUPD_SET_R1R0_00>;
> bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
> bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
>
> On the other hand, PINCTRL_MTK_PARIS use customized properties
> "mediatek,pull-up-adv" and "mediatek,pull-down-adv" to specify bias-pull
> setting for pins with 2 pull resistors.
> This introduce in-compatibility in device tree and increatse porting
> effort to Mediatek's customer that had already used PINCTRL_MTK version.
> Besides, if customers are not awared of this change and still write devicetree
> for PINCTRL_MTK version, they may encounter runtime failure with pinctrl and
> spent time to debug.
>
> This patch add backward compatible to previous Mediatek's bias-pull usage
> so that Mediatek's customer need not use a new devicetree property name.
> The rationale is that: changing driver implemenation had better leave
> interface unchanged.
>
> Change-Id: I8ea8f09278acc492ba04771826eaadb70224cd51

remove Change-Id

> ---
> drivers/pinctrl/mediatek/pinctrl-mt6765.c | 4 +-
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 285 +++++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 11 +
> drivers/pinctrl/mediatek/pinctrl-paris.c | 49 ++--
> 4 files changed, 327 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
> index bada37f..315aebd 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
> @@ -1074,8 +1074,8 @@
> .nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
> .bias_disable_set = mtk_pinconf_bias_disable_set,
> .bias_disable_get = mtk_pinconf_bias_disable_get,
> - .bias_set = mtk_pinconf_bias_set,
> - .bias_get = mtk_pinconf_bias_get,
> + .bias_set = mtk_pinconf_bias_set_combo,
> + .bias_get = mtk_pinconf_bias_get_combo,

base on the below context, I guess you should mean .bias_set_combo =
mtk_pinconf_bias_set_combo and .bias_get_combo =
mtk_pinconf_bias_get_combo.

> .drive_set = mtk_pinconf_drive_set_direct_val,
> .drive_get = mtk_pinconf_drive_get_direct_val,
> .adv_pull_get = mtk_pinconf_adv_pull_get,
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index 23a9529..dab8418 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -13,6 +13,8 @@
> #include <linux/io.h>
> #include <linux/of_irq.h>
>
> +#include <dt-bindings/pinctrl/mt65xx.h>

include #include <dt-bindings/pinctrl/mt65xx.h> in pinctrl-paris.c,
common-v2.c is supposed dt-binding and chip independence.

> +
> #include "mtk-eint.h"
> #include "pinctrl-mtk-common-v2.h"
>
> @@ -205,6 +207,20 @@ int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
> return 0;
> }
>
> +void mtk_hw_set_value_no_lookup(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + int value, struct mtk_pin_field *pf)
> +{
> + if (value < 0 || value > pf->mask)
> + return;
> +
> + if (!pf->next)
> + mtk_rmw(hw, pf->index, pf->offset, pf->mask << pf->bitpos,
> + (value & pf->mask) << pf->bitpos);
> + else
> + mtk_hw_write_cross_field(hw, pf, value);
> +}
> +
> int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
> int field, int *value)
> {
> @@ -224,6 +240,17 @@ int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
> return 0;
> }
>
> +void mtk_hw_get_value_no_lookup(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + int *value, struct mtk_pin_field *pf)
> +{
> + if (!pf->next)
> + *value = (mtk_r32(hw, pf->index, pf->offset)
> + >> pf->bitpos) & pf->mask;
> + else
> + mtk_hw_read_cross_field(hw, pf, value);
> +}
> +
> static int mtk_xt_find_eint_num(struct mtk_pinctrl *hw, unsigned long eint_n)
> {
> const struct mtk_pin_desc *desc;
> @@ -516,6 +543,264 @@ int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
> return 0;
> }
>
> +/* Combo for the following pull register type:
> + * 1. PU + PD
> + * 2. PULLSEL + PULLEN
> + * 3. PUPD + R0 + R1
> + */
> +int mtk_pinconf_bias_set_pu_pd(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 pullup, u32 arg)
> +{
> + struct mtk_pin_field pf;
> + int err = -EINVAL;

Initialization of err is not needed because mtk_hw_pin_field_lookup would do it.

> + int pu, pd;
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PU, &pf);
> + if (err)
> + goto out;
> +
> + if (arg == MTK_DISABLE) {
> + pu = 0;
> + pd = 0;
> + } else if ((arg == MTK_ENABLE) && pullup) {
> + pu = 1;
> + pd = 0;
> + } else if ((arg == MTK_ENABLE) && !pullup) {
> + pu = 0;
> + pd = 1;
> + } else {
> + goto out;
> + }
> +
> + mtk_hw_set_value_no_lookup(hw, desc, pu, &pf);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PD, &pf);
> + if (err)
> + goto out;
> +
> + mtk_hw_set_value_no_lookup(hw, desc, pd, &pf);
> +
I think we always can merge merge both mtk_hw_pin_field_lookup and
mtk_hw_set_value_no_lookup into mtk_hw_set_value, or is there
something I am missing out?

> +out:
> + return err;
> +}
> +
> +int mtk_pinconf_bias_set_pullsel_pullen(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 pullup, u32 arg)
> +{
> + struct mtk_pin_field pf;
> + int err = -EINVAL, enable;
ditto

> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLEN, &pf);
> + if (err)
> + goto out;
> +
> + if (arg == MTK_DISABLE)
> + enable = 0;
> + else if (arg == MTK_ENABLE)
> + enable = 1;
> + else
> + goto out;
> +
> + mtk_hw_set_value_no_lookup(hw, desc, enable, &pf);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLSEL, &pf);
> + if (err)
> + goto out;
> + mtk_hw_set_value_no_lookup(hw, desc, pullup, &pf);
> +
> +out:
> + return err;
> +}
> +
> +int mtk_pinconf_bias_set_pupd_r1_r0(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 pullup, u32 arg)
> +{
> + struct mtk_pin_field pf;
> + int err = -EINVAL;
ditto

> + int r0, r1;
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PUPD, &pf);
> + if (err)
> + goto out;
> +
> + if ((arg == MTK_DISABLE) || (arg == MTK_PUPD_SET_R1R0_00)) {
> + pullup = 0;
> + r0 = 0;
> + r1 = 0;
> + } else if (arg == MTK_PUPD_SET_R1R0_01) {
> + r0 = 1;
> + r1 = 0;
> + } else if (arg == MTK_PUPD_SET_R1R0_10) {
> + r0 = 0;
> + r1 = 1;
> + } else if (arg == MTK_PUPD_SET_R1R0_11) {
> + r0 = 1;
> + r1 = 1;
> + } else
> + goto out;
> +
> + /* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
> + mtk_hw_set_value_no_lookup(hw, desc, !pullup, &pf);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R0, &pf);
> + if (err)
> + goto out;
> + mtk_hw_set_value_no_lookup(hw, desc, r0, &pf);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R1, &pf);
> + if (err)
> + goto out;
> + mtk_hw_set_value_no_lookup(hw, desc, r1, &pf);
> +
> +out:
> + return err;
> +}
> +
> +int mtk_pinconf_bias_get_pu_pd(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 *pullup, u32 *enable)
> +{
> + struct mtk_pin_field pf;
> + int err = -EINVAL;
ditto

> + int pu, pd;
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PU, &pf);
> + if (err)
> + goto out;
> +
> + mtk_hw_get_value_no_lookup(hw, desc, &pu, &pf);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PD, &pf);
> + if (err)
> + goto out;
> +
> + mtk_hw_get_value_no_lookup(hw, desc, &pd, &pf);
> +
> + if (pu == 0 && pd == 0) {
> + *pullup = 0;
> + *enable = MTK_DISABLE;
> + } else if (pu == 1 && pd == 0) {
> + *pullup = 1;
> + *enable = MTK_ENABLE;
> + } else if (pu == 0 && pd == 1) {
> + *pullup = 0;
> + *enable = MTK_ENABLE;
> + } else {
> + err = -EINVAL;
> + goto out;
> + }
> +
> +out:
> + return err;
> +}
> +
> +int mtk_pinconf_bias_get_pullsel_pullen(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 *pullup, u32 *enable)
> +{
> + struct mtk_pin_field pf;
> + int err = -EINVAL;
ditto

> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLSEL, &pf);
> + if (err)
> + goto out;
> +
> + mtk_hw_get_value_no_lookup(hw, desc, pullup, &pf);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PULLEN, &pf);
> + if (err)
> + goto out;
> +
> + mtk_hw_get_value_no_lookup(hw, desc, enable, &pf);
> +
> +out:
> + return err;
> +}
> +
> +int mtk_pinconf_bias_get_pupd_r1_r0(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 *pullup, u32 *enable)
> +{
> + struct mtk_pin_field pf;
> + int err = -EINVAL;
ditto

> + int r0, r1;
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_PUPD, &pf);
> + if (err)
> + goto out;
> +
> + /* MTK HW PUPD bit: 1 for pull-down, 0 for pull-up */
> + mtk_hw_get_value_no_lookup(hw, desc, pullup, &pf);
> + *pullup = !(*pullup);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R0, &pf);
> + if (err)
> + goto out;
> + mtk_hw_get_value_no_lookup(hw, desc, &r0, &pf);
> +
> + err = mtk_hw_pin_field_lookup(hw, desc, PINCTRL_PIN_REG_R1, &pf);
> + if (err)
> + goto out;
> + mtk_hw_get_value_no_lookup(hw, desc, &r1, &pf);
> +
> + if ((r1 == 0) && (r0 == 0))
> + *enable = MTK_PUPD_SET_R1R0_00;
> + else if ((r1 == 0) && (r0 == 1))
> + *enable = MTK_PUPD_SET_R1R0_01;
> + else if ((r1 == 1) && (r0 == 0))
> + *enable = MTK_PUPD_SET_R1R0_10;
> + else if ((r1 == 1) && (r0 == 1))
> + *enable = MTK_PUPD_SET_R1R0_11;
> + else
> + goto out;
> +
> +out:
> + return err;
> +}
> +
> +int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 pullup, u32 arg)
> +{
> + int err;
> +
> + err = mtk_pinconf_bias_set_pu_pd(hw, desc, pullup, arg);
> + if (!err)
> + goto out;
> +
> + err = mtk_pinconf_bias_set_pullsel_pullen(hw, desc, pullup, arg);
> + if (!err)
> + goto out;
> +
> + err = mtk_pinconf_bias_set_pupd_r1_r0(hw, desc, pullup, arg);
> +
> +out:
> + return err;
> +}
> +
> +int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 *pullup, u32 *enable)
> +{
> + int err;
> +
> + err = mtk_pinconf_bias_get_pu_pd(hw, desc, pullup, enable);
> + if (!err)
> + goto out;
> +
> + err = mtk_pinconf_bias_get_pullsel_pullen(hw, desc, pullup, enable);
> + if (!err)
> + goto out;
> +
> + err = mtk_pinconf_bias_get_pupd_r1_r0(hw, desc, pullup, enable);
> +
> +out:
> + return err;
> +}
> +
> /* Revision 0 */
> int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, u32 arg)
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> index b3bada0..a13dcae 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> @@ -216,6 +216,11 @@ struct mtk_pin_soc {
> int (*bias_get)(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup, int *res);
>
> + int (*bias_set_combo)(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 pullup, u32 arg);
> + int (*bias_get_combo)(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 *pullup, u32 *arg);
> +
> int (*drive_set)(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, u32 arg);
> int (*drive_get)(struct mtk_pinctrl *hw,
> @@ -277,6 +282,12 @@ int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
> int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup,
> int *res);
> +int mtk_pinconf_bias_set_combo(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 pullup, u32 enable);
> +int mtk_pinconf_bias_get_combo(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc,
> + u32 *pullup, u32 *enable);
>
> int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, u32 arg);
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index bbe3f8a..0a9440a 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -79,28 +79,38 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
> struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
> u32 param = pinconf_to_config_param(*config);
> int err, reg, ret = 1;
> + int pullup;
> const struct mtk_pin_desc *desc;
>
> desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
>
> switch (param) {
> case PIN_CONFIG_BIAS_DISABLE:
> - if (hw->soc->bias_disable_get)
> - err = hw->soc->bias_disable_get(hw, desc, &ret);
> - else
> - err = -ENOTSUPP;
> - break;
> case PIN_CONFIG_BIAS_PULL_UP:
> - if (hw->soc->bias_get)
> - err = hw->soc->bias_get(hw, desc, 1, &ret);
> - else
> - err = -ENOTSUPP;
> - break;
> case PIN_CONFIG_BIAS_PULL_DOWN:
> - if (hw->soc->bias_get)
> - err = hw->soc->bias_get(hw, desc, 0, &ret);
> - else

The above changes would break MT8183 driver, so we need to consider
them along with MT8183 pinctrl and then move the patchset forward.

> + if (hw->soc->bias_get_combo) {
> + err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
> + if (err)
> + goto out;
> + if (param == PIN_CONFIG_BIAS_DISABLE) {
> + if (ret == MTK_PUPD_SET_R1R0_00)
> + ret = MTK_DISABLE;
> + } else if (param == PIN_CONFIG_BIAS_PULL_UP) {
> + /* When desire to get pull-up value,
> + * return error if current setting is pull-down
> + */
> + if (!pullup)
> + err = -EINVAL;
> + } else if (param == PIN_CONFIG_BIAS_PULL_DOWN) {
> + /* When desire to get pull-down value,
> + * return error if current setting is pull-up
> + */
> + if (pullup)
> + err = -EINVAL;
> + }
> + } else {
> err = -ENOTSUPP;
> + }
> break;
> case PIN_CONFIG_SLEW_RATE:
> err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &ret);
> @@ -188,20 +198,20 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
>
> switch ((u32)param) {
> case PIN_CONFIG_BIAS_DISABLE:
> - if (hw->soc->bias_disable_set)
> - err = hw->soc->bias_disable_set(hw, desc);
> + if (hw->soc->bias_set_combo)
> + err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE);
> else
> err = -ENOTSUPP;
> break;
> case PIN_CONFIG_BIAS_PULL_UP:
> - if (hw->soc->bias_set)
> - err = hw->soc->bias_set(hw, desc, 1);
> + if (hw->soc->bias_set_combo)
> + err = hw->soc->bias_set_combo(hw, desc, 1, arg);
> else
> err = -ENOTSUPP;
> break;
> case PIN_CONFIG_BIAS_PULL_DOWN:
> - if (hw->soc->bias_set)
> - err = hw->soc->bias_set(hw, desc, 0);
> + if (hw->soc->bias_set_combo)
> + err = hw->soc->bias_set_combo(hw, desc, 0, arg);
> else
> err = -ENOTSUPP;
> break;
> @@ -892,7 +902,6 @@ int mtk_paris_pinctrl_probe(struct platform_device *pdev,
> return 0;
> }
>
> -
remove the nunessary empty line

> static int mtk_paris_pinctrl_suspend(struct device *device)
> {
> struct mtk_pinctrl *pctl = dev_get_drvdata(device);
> --
> 1.8.1.1.dirty
>

2019-08-14 00:10:27

by Sean Wang

[permalink] [raw]
Subject: Re: [PATCH v1 2/5] pinctrl: mediatek: Supporting driving setting without mapping current to register value

Hi, Light

a few nitpicks, but the overall changes look good to me

On Tue, Aug 13, 2019 at 1:53 AM Light Hsieh <[email protected]> wrote:
>
> From: Light Hsieh <[email protected]>
>
> Mediatek's smarphone project actual usage does need to know current value
> (in mA) in procedure of finding the best driving setting.
> The steps in the procedure is like as follow:
>
> 1. set driving setting field in setting register as 0, measure waveform,
> perform test, and etc.
> 2. set driving setting field in setting register as 1, measure waveform,
> perform test, and etc.
> ...
> n. set driving setting field in setting register as n-1, measure
> waveform, perform test, and etc.
> Check the results of steps 1~n and adopt the setting that get best result.
>
> This procedure does need to know the mapping between current to register
> value.
> Therefore, setting driving without mapping current is more pratical for
> Mediatek's smartphone usage.
>
> Change-Id: Iacdabf0cada230fc5acad96673810c12a6c4556d

remove change-id

> ---
> drivers/pinctrl/mediatek/pinctrl-mt6765.c | 4 ++--
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c | 21 +++++++++++++++++++++
> drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h | 5 +++++
> drivers/pinctrl/mediatek/pinctrl-paris.c | 1 +
> 4 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6765.c b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
> index 32451e8..e024ebc 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mt6765.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
> @@ -1077,8 +1077,8 @@
> .bias_disable_get = mtk_pinconf_bias_disable_get,
> .bias_set = mtk_pinconf_bias_set,
> .bias_get = mtk_pinconf_bias_get,
> - .drive_set = mtk_pinconf_drive_set_rev1,
> - .drive_get = mtk_pinconf_drive_get_rev1,
> + .drive_set = mtk_pinconf_drive_set_direct_val,
> + .drive_get = mtk_pinconf_drive_get_direct_val,

I prefer to mtk_pinconf_drive_[get,set]_raw_val that would be better
to understand.

> .adv_pull_get = mtk_pinconf_adv_pull_get,
> .adv_pull_set = mtk_pinconf_adv_pull_set,
> };
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> index 4687f63..23a9529 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
> @@ -607,6 +607,27 @@ int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
> return 0;
> }
>
> +/* Revision direct value */
> +int mtk_pinconf_drive_set_direct_val(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 arg)
> +{
> + int err;
> +
> + err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV, arg);
> +
> + return err;
> +}
> +
> +int mtk_pinconf_drive_get_direct_val(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, int *val)
> +{
> + int err;
> +
> + err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, val);
> +
> + return err;
> +}
> +
> int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup,
> u32 arg)
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> index 1b7da42..b3bada0 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
> @@ -288,6 +288,11 @@ int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
> int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, int *val);
>
> +int mtk_pinconf_drive_set_direct_val(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, u32 arg);
> +int mtk_pinconf_drive_get_direct_val(struct mtk_pinctrl *hw,
> + const struct mtk_pin_desc *desc, int *val);
> +
> int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
> const struct mtk_pin_desc *desc, bool pullup,
> u32 arg);
> diff --git a/drivers/pinctrl/mediatek/pinctrl-paris.c b/drivers/pinctrl/mediatek/pinctrl-paris.c
> index 28b4951..71c94b2 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-paris.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
> @@ -964,3 +964,4 @@ static int mtk_paris_pinctrl_resume(struct device *device)
> .suspend_noirq = mtk_paris_pinctrl_suspend,
> .resume_noirq = mtk_paris_pinctrl_resume,
> };
> +

remove unnecessary the empty line

> --
> 1.8.1.1.dirty
>

2019-08-23 10:32:42

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v1 5/5] pinctrl: mediatek: Add support for pin configuration dump via sysfs.

Hi Light,

thanks for your patch!

On Tue, Aug 13, 2019 at 10:53 AM Light Hsieh <[email protected]> wrote:

> From: Light Hsieh <[email protected]>
>
> Add support for pin configuration dump via catting
> /sys/kernel/debug/pinctrl/$platform_dependent_path/pinconf-pins.

This is debugfs so rename the subject "*debugfs"

> pinctrl framework had already support such dump. This patch implement the
> operation function pointer to fullfill this dump.

Fair enough, that's fine.

> Change-Id: Ib59212eb47febcd84140cbf84e1bd7286769beb0

This has been remarked on before.

This patch is missing your Signed-off-by, please fix that.

Yours,
Linus Walleij

2019-08-23 19:14:39

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v1 0/5] Improve MediaTek pinctrl v2 and make backward compatible to smartphone mass production usage

On Tue, Aug 13, 2019 at 10:53 AM Light Hsieh <[email protected]> wrote:

> This patch improves MediaTek pinctrl v2 and makes backward compatible to
> current smartphone mass production usage by:
> 1.Check gpio pin number and use binary search in control address lookup
> 2.Supporting driving setting without mapping current to register value
> 3.Correct usage of PIN_CONFIG get/set implementation

I rely on Sean to review and get this in shape.

> 4.Backward compatible to previous Mediatek's bias-pull usage

This is fine as long as the new style of using explicit pull
setting also works. It's nice to be compatible.

> 5.Add support for pin configuration dump via sysfs

Do you mean debugfs? You should use debugfs for debug.
sysfs is subject to ABI rules.

Yours,
Linus Walleij