Hi,
On Wed, Sep 4, 2019 at 9:47 AM <[email protected]> wrote:
>
> The power budget for SuperSpeed mode should be 900 mA
>
> according to USB3.0 specification, so set the power
>
> budget to 900 mA for dummy_start_ss which is only used
>
> for SuperSpeed mode.
>
>
>
> If the max power consumption of SuperSpeed device is
>
> larger than 500 mA, insufficient available bus power
>
> error happens in usb_choose_configuration function
>
> when the device connects to dummy hcd.
>
>
>
> Signed-off-by: Jacky Cao <[email protected]>
You must send plain/text emails. I'm not receiving this via the
mailing list. Please, fix your
email client or use git send-email
--
balbi
Hi
>You must send plain/text emails. I'm not receiving this via the mailing list. Please, fix your email client or use git send-email
Thank you for your information.
I resend mail with text format, would you kind confirm the patch, thank you.
Best Regards
Jacky
-----Original Message-----
From: Felipe Balbi <[email protected]>
Sent: Wednesday, September 4, 2019 3:47 PM
To: Cao, Jacky <[email protected]>
Cc: Greg KH <[email protected]>; [email protected]; Kernel development list <[email protected]>; Kobayashi, Kento (Sony) <[email protected]>
Subject: Re: [PATCH] USB: dummy-hcd: fix power budget for SuperSpeed mode
Hi,
On Wed, Sep 4, 2019 at 9:47 AM <[email protected]> wrote:
>
> The power budget for SuperSpeed mode should be 900 mA
>
> according to USB3.0 specification, so set the power
>
> budget to 900 mA for dummy_start_ss which is only used
>
> for SuperSpeed mode.
>
>
>
> If the max power consumption of SuperSpeed device is
>
> larger than 500 mA, insufficient available bus power
>
> error happens in usb_choose_configuration function
>
> when the device connects to dummy hcd.
>
>
>
> Signed-off-by: Jacky Cao <[email protected]>
You must send plain/text emails. I'm not receiving this via the mailing list. Please, fix your email client or use git send-email
--
balbi